ppc4xx: Remove lcd4_lwmon5 support
This platform has not gone into production. So lets remove it.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
diff --git a/arch/powerpc/cpu/ppc4xx/Kconfig b/arch/powerpc/cpu/ppc4xx/Kconfig
index 8d3ba8d..ce58d86 100644
--- a/arch/powerpc/cpu/ppc4xx/Kconfig
+++ b/arch/powerpc/cpu/ppc4xx/Kconfig
@@ -10,7 +10,6 @@
config TARGET_LWMON5
bool "Support lwmon5"
- select SUPPORT_SPL
config TARGET_T3CORP
bool "Support t3corp"
diff --git a/board/lwmon5/MAINTAINERS b/board/lwmon5/MAINTAINERS
index 7402ab6..3ea1888 100644
--- a/board/lwmon5/MAINTAINERS
+++ b/board/lwmon5/MAINTAINERS
@@ -3,5 +3,4 @@
S: Maintained
F: board/lwmon5/
F: include/configs/lwmon5.h
-F: configs/lcd4_lwmon5_defconfig
F: configs/lwmon5_defconfig
diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c
index e9aa0b7..8ad6712 100644
--- a/board/lwmon5/lwmon5.c
+++ b/board/lwmon5/lwmon5.c
@@ -187,11 +187,9 @@
u32 pbcr;
int size_val = 0;
u32 reg;
-#ifndef CONFIG_LCD4_LWMON5
unsigned long usb2d0cr = 0;
unsigned long usb2phy0cr, usb2h0cr = 0;
unsigned long sdr0_pfc1, sdr0_srst;
-#endif
/*
* FLASH stuff...
@@ -222,7 +220,6 @@
CONFIG_ENV_ADDR_REDUND + 2 * CONFIG_ENV_SECT_SIZE - 1,
&flash_info[cfi_flash_num_flash_banks - 1]);
-#ifndef CONFIG_LCD4_LWMON5
/*
* USB suff...
*/
@@ -296,7 +293,6 @@
/* 7. Reassert internal PHY reset: */
mtsdr(SDR0_SRST1, SDR0_SRST1_USB20PHY);
udelay(1000);
-#endif
/*
* Clear resets
@@ -304,9 +300,7 @@
mtsdr(SDR0_SRST1, 0x00000000);
mtsdr(SDR0_SRST0, 0x00000000);
-#ifndef CONFIG_LCD4_LWMON5
printf("USB: Host(int phy) Device(ext phy)\n");
-#endif
/*
* Clear PLB4A0_ACR[WRP]
@@ -316,12 +310,10 @@
reg = mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_WRP_MASK;
mtdcr(PLB4A0_ACR, reg);
-#ifndef CONFIG_LCD4_LWMON5
/*
* Init matrix keyboard
*/
misc_init_r_kbd();
-#endif
return 0;
}
diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c
index 5dfbb0b..bcb3449 100644
--- a/board/lwmon5/sdram.c
+++ b/board/lwmon5/sdram.c
@@ -147,7 +147,6 @@
************************************************************************/
phys_size_t initdram (int board_type)
{
-#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_LCD4_LWMON5)
/* CL=4 */
mtsdram(DDR0_02, 0x00000000);
@@ -241,7 +240,6 @@
* exceptions are enabled.
*/
set_mcsr(get_mcsr());
-#endif /* CONFIG_SPL_BUILD */
return (CONFIG_SYS_MBYTES_SDRAM << 20);
}
diff --git a/configs/lcd4_lwmon5_defconfig b/configs/lcd4_lwmon5_defconfig
deleted file mode 100644
index b911dbd..0000000
--- a/configs/lcd4_lwmon5_defconfig
+++ /dev/null
@@ -1,6 +0,0 @@
-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_LWMON5=y
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="LCD4_LWMON5"
-# CONFIG_CMD_SETEXPR is not set
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 2a50bfe..26136a5 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -25,13 +25,8 @@
#define CONFIG_SYS_GENERIC_BOARD
-#ifdef CONFIG_LCD4_LWMON5
-#define CONFIG_SYS_TEXT_BASE 0x01000000 /* SPL U-Boot TEXT_BASE */
-#define CONFIG_HOSTNAME lcd4_lwmon5
-#else
#define CONFIG_SYS_TEXT_BASE 0xFFF80000
#define CONFIG_HOSTNAME lwmon5
-#endif
#define CONFIG_SYS_CLK_FREQ 33300000 /* external freq to pll */
@@ -67,11 +62,9 @@
#define CONFIG_SYS_PCI_MEMBASE2 (CONFIG_SYS_PCI_MEMBASE1 + 0x10000000)
#define CONFIG_SYS_PCI_MEMBASE3 (CONFIG_SYS_PCI_MEMBASE2 + 0x10000000)
-#ifndef CONFIG_LCD4_LWMON5
#define CONFIG_SYS_USB2D0_BASE 0xe0000100
#define CONFIG_SYS_USB_DEVICE 0xe0000000
#define CONFIG_SYS_USB_HOST 0xe0000400
-#endif
/*
* Initial RAM & stack pointer
@@ -81,20 +74,13 @@
* content during reset (GPT0_COMP6). This way we reserve the OCM (16k)
* for logbuffer only. (GPT0_COMP1-COMP5 are reserved for logbuffer header.)
*/
-#ifndef CONFIG_LCD4_LWMON5
#define CONFIG_SYS_INIT_RAM_DCACHE 1 /* d-cache as init ram */
#define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* DCache */
#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10)
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#else
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE
-#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10)
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#endif
+
/* unused GPT0 COMP reg */
#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
#define CONFIG_SYS_OCM_SIZE (16 << 10)
@@ -168,11 +154,8 @@
#define CONFIG_SYS_MBYTES_SDRAM 256
#define CONFIG_SYS_DDR_CACHED_ADDR 0x40000000 /* setup 2nd TLB cached here */
#define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */
-#ifndef CONFIG_LCD4_LWMON5
#define CONFIG_DDR_ECC /* enable ECC */
-#endif
-#ifndef CONFIG_LCD4_LWMON5
/* POST support */
#define CONFIG_POST (CONFIG_SYS_POST_CACHE | \
CONFIG_SYS_POST_CPU | \
@@ -281,7 +264,6 @@
#define CONFIG_ALT_LH_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP1)
#define CONFIG_ALT_LB_ADDR (CONFIG_SYS_OCM_BASE)
#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
-#endif
/*
* I2C
@@ -401,7 +383,6 @@
#define CONFIG_VIDEO_SW_CURSOR
#define CONFIG_SPLASH_SCREEN
-#ifndef CONFIG_LCD4_LWMON5
/*
* USB/EHCI
*/
@@ -417,7 +398,6 @@
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
-#endif
/*
* BOOTP options
@@ -448,11 +428,9 @@
#define CONFIG_CMD_BMP
#endif
-#ifndef CONFIG_LCD4_LWMON5
#ifdef CONFIG_440EPX
#define CONFIG_CMD_USB
#endif
-#endif
/*
* Miscellaneous configurable options
@@ -485,13 +463,11 @@
#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/
-#ifndef CONFIG_LCD4_LWMON5
#ifndef DEBUG
#define CONFIG_HW_WATCHDOG 1 /* Use external HW-Watchdog */
#endif
#define CONFIG_WD_PERIOD 40000 /* in usec */
#define CONFIG_WD_MAX_RATE 66600 /* in ticks */
-#endif
/*
* For booting Linux, the board info and command line data
@@ -572,12 +548,7 @@
#define CONFIG_SYS_GPIO_SYSMON_STATUS 62
#define CONFIG_SYS_GPIO_WATCHDOG 63
-/* On LCD4, GPIO49 has to be configured to 0 instead of 1 */
-#ifdef CONFIG_LCD4_LWMON5
-#define GPIO49_VAL 0
-#else
#define GPIO49_VAL 1
-#endif
/*
* PPC440 GPIO Configuration
@@ -659,36 +630,4 @@
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#endif
-/*
- * SPL related defines
- */
-#ifdef CONFIG_LCD4_LWMON5
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_NOR_SUPPORT
-#define CONFIG_SPL_TEXT_BASE 0xffff0000 /* last 64 KiB for SPL */
-#define CONFIG_SYS_SPL_MAX_LEN (64 << 10)
-#define CONFIG_UBOOT_PAD_TO 458752 /* decimal for 'dd' */
-#define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */
-#define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */
-#define CONFIG_SPL_SERIAL_SUPPORT
-
-/* Place BSS for SPL near end of SDRAM */
-#define CONFIG_SPL_BSS_START_ADDR ((256 - 1) << 20)
-#define CONFIG_SPL_BSS_MAX_SIZE (64 << 10)
-
-#define CONFIG_SPL_OS_BOOT
-/* Place patched DT blob (fdt) at this address */
-#define CONFIG_SYS_SPL_ARGS_ADDR 0x01800000
-
-#define CONFIG_SPL_TARGET "u-boot-img-spl-at-end.bin"
-
-/* Settings for real U-Boot to be loaded from NOR flash */
-#define CONFIG_SYS_UBOOT_BASE (-CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_UBOOT_START 0x01002100
-
-#define CONFIG_SYS_OS_BASE 0xf8000000
-#define CONFIG_SYS_FDT_BASE 0xf87c0000
-#endif
-
#endif /* __CONFIG_H */