dm: treewide: Complete migration to new driver model schema
Update various build and test components to use the new schema.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/drivers/core/ofnode.c b/drivers/core/ofnode.c
index 5fdac2b..f49ee49 100644
--- a/drivers/core/ofnode.c
+++ b/drivers/core/ofnode.c
@@ -1312,22 +1312,22 @@
{
#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_TPL_BUILD)
/* for SPL and TPL the remaining nodes after the fdtgrep 1st pass
- * had property dm-pre-reloc or u-boot,dm-spl/tpl.
+ * had property bootph-all or bootph-pre-sram/bootph-pre-ram.
* They are removed in final dtb (fdtgrep 2nd pass)
*/
return true;
#else
- if (ofnode_read_bool(node, "u-boot,dm-pre-reloc"))
+ if (ofnode_read_bool(node, "bootph-all"))
return true;
- if (ofnode_read_bool(node, "u-boot,dm-pre-proper"))
+ if (ofnode_read_bool(node, "bootph-some-ram"))
return true;
/*
* In regular builds individual spl and tpl handling both
* count as handled pre-relocation for later second init.
*/
- if (ofnode_read_bool(node, "u-boot,dm-spl") ||
- ofnode_read_bool(node, "u-boot,dm-tpl"))
+ if (ofnode_read_bool(node, "bootph-pre-ram") ||
+ ofnode_read_bool(node, "bootph-pre-sram"))
return true;
if (IS_ENABLED(CONFIG_OF_TAG_MIGRATE)) {
diff --git a/drivers/video/video-uclass.c b/drivers/video/video-uclass.c
index 6aaacff..ab482f1 100644
--- a/drivers/video/video-uclass.c
+++ b/drivers/video/video-uclass.c
@@ -529,8 +529,8 @@
addr = uc_priv->video_ptr;
size = alloc_fb(dev, &addr);
if (addr < gd->video_bottom) {
- /* Device tree node may need the 'u-boot,dm-pre-reloc' or
- * 'u-boot,dm-pre-proper' tag
+ /* Device tree node may need the 'bootph-all' or
+ * 'bootph-some-ram' tag
*/
printf("Video device '%s' cannot allocate frame buffer memory -ensure the device is set up before relocation\n",
dev->name);
diff --git a/dts/Kconfig b/dts/Kconfig
index deb865d..3b7489f 100644
--- a/dts/Kconfig
+++ b/dts/Kconfig
@@ -362,7 +362,7 @@
help
Since SPL normally runs in a reduced memory space, the device tree
is cut down to only what is needed to load and start U-Boot. Only
- nodes marked with the property "u-boot,dm-pre-reloc" will be
+ nodes marked with the property "bootph-all" will be
included. In addition, some properties are not used by U-Boot and
can be discarded. This option defines the list of properties to
discard.
diff --git a/include/dm/device.h b/include/dm/device.h
index e946038..b86bf90 100644
--- a/include/dm/device.h
+++ b/include/dm/device.h
@@ -1070,7 +1070,7 @@
* sub-nodes and binds drivers for each node where a driver can be found.
*
* If this is called prior to relocation, only pre-relocation devices will be
- * bound (those marked with u-boot,dm-pre-reloc in the device tree, or where
+ * bound (those marked with bootph-all in the device tree, or where
* the driver has the DM_FLAG_PRE_RELOC flag set). Otherwise, all devices will
* be bound.
*
diff --git a/include/dm/ofnode.h b/include/dm/ofnode.h
index 3f6b084..c006772 100644
--- a/include/dm/ofnode.h
+++ b/include/dm/ofnode.h
@@ -1188,12 +1188,12 @@
* determine if a node was bound in one of SPL/TPL stages.
*
* There are 4 settings currently in use
- * - u-boot,dm-pre-proper: U-Boot proper pre-relocation only
- * - u-boot,dm-pre-reloc: legacy and indicates any of TPL or SPL
+ * - bootph-some-ram: U-Boot proper pre-relocation only
+ * - bootph-all: all phases
* Existing platforms only use it to indicate nodes needed in
- * SPL. Should probably be replaced by u-boot,dm-spl for new platforms.
- * - u-boot,dm-spl: SPL and U-Boot pre-relocation
- * - u-boot,dm-tpl: TPL and U-Boot pre-relocation
+ * SPL. Should probably be replaced by bootph-pre-ram for new platforms.
+ * - bootph-pre-ram: SPL and U-Boot pre-relocation
+ * - bootph-pre-sram: TPL and U-Boot pre-relocation
*
* @node: node to check
* Return: true if node is needed in SPL/TL, false otherwise
diff --git a/test/dm/test-fdt.c b/test/dm/test-fdt.c
index 1d2af94..8e6e42e 100644
--- a/test/dm/test-fdt.c
+++ b/test/dm/test-fdt.c
@@ -215,7 +215,7 @@
/*
* These are 2 pre-reloc devices:
- * one with "u-boot,dm-pre-reloc" property (a-test node), and the other
+ * one with "bootph-all" property (a-test node), and the other
* one whose driver marked with DM_FLAG_PRE_RELOC flag (h-test node).
*/
ut_asserteq(2, list_count_items(&uc->dev_head));
diff --git a/test/py/tests/test_ofplatdata.py b/test/py/tests/test_ofplatdata.py
index e9cce4d..51a1884 100644
--- a/test/py/tests/test_ofplatdata.py
+++ b/test/py/tests/test_ofplatdata.py
@@ -13,10 +13,10 @@
fdtgrep = cons.config.build_dir + '/tools/fdtgrep'
output = util.run_and_log(cons, [fdtgrep, '-l', dtb])
- assert "u-boot,dm-pre-reloc" not in output
- assert "u-boot,dm-pre-proper" not in output
- assert "u-boot,dm-spl" not in output
- assert "u-boot,dm-tpl" not in output
+ assert "bootph-all" not in output
+ assert "bootph-some-ram" not in output
+ assert "bootph-pre-ram" not in output
+ assert "bootph-pre-sram" not in output
assert "spl-test5" not in output
assert "spl-test6" not in output
diff --git a/tools/binman/binman.rst b/tools/binman/binman.rst
index 03a99a1..2bcb7d3 100644
--- a/tools/binman/binman.rst
+++ b/tools/binman/binman.rst
@@ -1122,8 +1122,7 @@
board. This can be done by using #include to bring in a common file. Another
approach supported by the U-Boot build system is to automatically include
a common header. You can then put the binman node (and anything else that is
-specific to U-Boot, such as u-boot,dm-pre-reloc properies) in that header
-file.
+specific to U-Boot, such as bootph-all properies) in that header file.
Binman will search for the following files in arch/<arch>/dts::
diff --git a/tools/dtoc/test_fdt.py b/tools/dtoc/test_fdt.py
index 3b8ee00..dffa86f 100755
--- a/tools/dtoc/test_fdt.py
+++ b/tools/dtoc/test_fdt.py
@@ -132,10 +132,10 @@
"""Tests obtaining a list of properties"""
node = self.dtb.GetNode('/spl-test')
props = self.dtb.GetProps(node)
- self.assertEqual(['boolval', 'bytearray', 'byteval', 'compatible',
- 'int64val', 'intarray', 'intval', 'longbytearray',
- 'maybe-empty-int', 'notstring', 'stringarray',
- 'stringval', 'u-boot,dm-pre-reloc'],
+ self.assertEqual(['boolval', 'bootph-all', 'bytearray', 'byteval',
+ 'compatible', 'int64val', 'intarray', 'intval',
+ 'longbytearray', 'maybe-empty-int', 'notstring',
+ 'stringarray', 'stringval', ],
sorted(props.keys()))
def test_check_error(self):