MX: Set a common gpio.h for all i.MX
Each i.MX has its own gpio.h, defining the same structure.
The internal GPIO controller has the same layout
(at least for the register used by u-boot) and can be shared.
Signed-off-by: Stefano Babic <sbabic@denx.de>
Tested-by: Matt Sealey <matt@genesi-usa.com>
diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
index cb85597..db0de63 100644
--- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
+++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
@@ -87,12 +87,12 @@
.scl = {
.i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | PC,
.gpio_mode = MX6Q_PAD_EIM_D21__GPIO_3_21 | PC,
- .gp = GPIO_NUMBER(3, 21)
+ .gp = IMX_GPIO_NR(3, 21)
},
.sda = {
.i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC,
.gpio_mode = MX6Q_PAD_EIM_D28__GPIO_3_28 | PC,
- .gp = GPIO_NUMBER(3, 28)
+ .gp = IMX_GPIO_NR(3, 28)
}
};
@@ -101,12 +101,12 @@
.scl = {
.i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC,
.gpio_mode = MX6Q_PAD_KEY_COL3__GPIO_4_12 | PC,
- .gp = GPIO_NUMBER(4, 12)
+ .gp = IMX_GPIO_NR(4, 12)
},
.sda = {
.i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC,
.gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO_4_13 | PC,
- .gp = GPIO_NUMBER(4, 13)
+ .gp = IMX_GPIO_NR(4, 13)
}
};
@@ -115,12 +115,12 @@
.scl = {
.i2c_mode = MX6Q_PAD_GPIO_5__I2C3_SCL | PC,
.gpio_mode = MX6Q_PAD_GPIO_5__GPIO_1_5 | PC,
- .gp = GPIO_NUMBER(1, 5)
+ .gp = IMX_GPIO_NR(1, 5)
},
.sda = {
.i2c_mode = MX6Q_PAD_GPIO_16__I2C3_SDA | PC,
.gpio_mode = MX6Q_PAD_GPIO_16__GPIO_7_11 | PC,
- .gp = GPIO_NUMBER(7, 11)
+ .gp = IMX_GPIO_NR(7, 11)
}
};
@@ -229,9 +229,9 @@
imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
/* Reset USB hub */
- gpio_direction_output(GPIO_NUMBER(7, 12), 0);
+ gpio_direction_output(IMX_GPIO_NR(7, 12), 0);
mdelay(2);
- gpio_set_value(GPIO_NUMBER(7, 12), 1);
+ gpio_set_value(IMX_GPIO_NR(7, 12), 1);
return 0;
}
@@ -413,12 +413,12 @@
};
static struct button_key const buttons[] = {
- {"back", GPIO_NUMBER(2, 2), 'B'},
- {"home", GPIO_NUMBER(2, 4), 'H'},
- {"menu", GPIO_NUMBER(2, 1), 'M'},
- {"search", GPIO_NUMBER(2, 3), 'S'},
- {"volup", GPIO_NUMBER(7, 13), 'V'},
- {"voldown", GPIO_NUMBER(4, 5), 'v'},
+ {"back", IMX_GPIO_NR(2, 2), 'B'},
+ {"home", IMX_GPIO_NR(2, 4), 'H'},
+ {"menu", IMX_GPIO_NR(2, 1), 'M'},
+ {"search", IMX_GPIO_NR(2, 3), 'S'},
+ {"volup", IMX_GPIO_NR(7, 13), 'V'},
+ {"voldown", IMX_GPIO_NR(4, 5), 'v'},
};
/*