i.MX6UL: icore: Add SPL_OF_CONTROL support
Add OF_CONTROL support for SPL code.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
diff --git a/arch/arm/dts/imx6ul-geam-kit.dts b/arch/arm/dts/imx6ul-geam-kit.dts
index 07c21cb..15e3f94 100644
--- a/arch/arm/dts/imx6ul-geam-kit.dts
+++ b/arch/arm/dts/imx6ul-geam-kit.dts
@@ -87,6 +87,7 @@
};
&usdhc1 {
+ u-boot,dm-spl;
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
@@ -134,6 +135,7 @@
};
pinctrl_usdhc1: usdhc1grp {
+ u-boot,dm-spl;
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
@@ -145,6 +147,7 @@
};
pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ u-boot,dm-spl;
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
@@ -156,6 +159,7 @@
};
pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ u-boot,dm-spl;
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
diff --git a/arch/arm/dts/imx6ul-isiot-emmc.dts b/arch/arm/dts/imx6ul-isiot-emmc.dts
index 677de96..a611e3b 100644
--- a/arch/arm/dts/imx6ul-isiot-emmc.dts
+++ b/arch/arm/dts/imx6ul-isiot-emmc.dts
@@ -50,6 +50,7 @@
};
&usdhc2 {
+ u-boot,dm-spl;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
@@ -60,6 +61,7 @@
&iomuxc {
pinctrl_usdhc2: usdhc2grp {
+ u-boot,dm-spl;
fsl,pins = <
MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070
MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070
diff --git a/arch/arm/dts/imx6ul-isiot.dtsi b/arch/arm/dts/imx6ul-isiot.dtsi
index 9a3c35c..5007a88 100644
--- a/arch/arm/dts/imx6ul-isiot.dtsi
+++ b/arch/arm/dts/imx6ul-isiot.dtsi
@@ -82,6 +82,7 @@
};
&usdhc1 {
+ u-boot,dm-spl;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
@@ -128,6 +129,7 @@
};
pinctrl_usdhc1: usdhc1grp {
+ u-boot,dm-spl;
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
diff --git a/arch/arm/dts/imx6ul.dtsi b/arch/arm/dts/imx6ul.dtsi
index def5f8c..7affab8 100644
--- a/arch/arm/dts/imx6ul.dtsi
+++ b/arch/arm/dts/imx6ul.dtsi
@@ -134,6 +134,7 @@
compatible = "simple-bus";
interrupt-parent = <&gpc>;
ranges;
+ u-boot,dm-spl;
pmu {
compatible = "arm,cortex-a7-pmu";
@@ -185,6 +186,7 @@
#size-cells = <1>;
reg = <0x02000000 0x100000>;
ranges;
+ u-boot,dm-spl;
spba-bus@02000000 {
compatible = "fsl,spba-bus", "simple-bus";
@@ -415,6 +417,7 @@
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 23 10>, <&iomuxc 10 17 6>,
<&iomuxc 16 33 16>;
+ u-boot,dm-spl;
};
gpio2: gpio@020a0000 {
@@ -451,6 +454,7 @@
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 94 17>, <&iomuxc 17 117 12>;
+ u-boot,dm-spl;
};
gpio5: gpio@020ac000 {
@@ -649,6 +653,7 @@
iomuxc: iomuxc@020e0000 {
compatible = "fsl,imx6ul-iomuxc";
reg = <0x020e0000 0x4000>;
+ u-boot,dm-spl;
};
gpr: iomuxc-gpr@020e4000 {
@@ -729,6 +734,7 @@
#size-cells = <1>;
reg = <0x02100000 0x100000>;
ranges;
+ u-boot,dm-spl;
usbotg1: usb@02184000 {
compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index b78ebc1..412e48e 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -316,6 +316,11 @@
select DM_MMC
select DM_THERMAL
select SUPPORT_SPL
+ select SPL_DM if SPL
+ select SPL_OF_CONTROL if SPL
+ select SPL_SEPARATE_BSS if SPL
+ select SPL_PINCTRL if SPL
+
config TARGET_MX6UL_ISIOT
bool "Support Engicam Is.IoT MX6UL"
select BOARD_LATE_INIT
@@ -328,6 +333,10 @@
select DM_MMC
select DM_THERMAL
select SUPPORT_SPL
+ select SPL_DM if SPL
+ select SPL_OF_CONTROL if SPL
+ select SPL_SEPARATE_BSS if SPL
+ select SPL_PINCTRL if SPL
config TARGET_MX6ULL_14X14_EVK
bool "Support mx6ull_14x14_evk"