arm: move CONFIG_TFABOOT to generic Kconfig
Currently, CONFIG_TFABOOT is located in armv8/fsl-layerscape Kconfig,
but it will be also useful for other targets if some additional
configuration are necessary.
So move it to arch/arm/Kconfig.
Please note that CONFIG_TFABOOT still depends on
CONFIG_ARCH_SUPPORT_TFABOOT and so the menu won't come up
if any target doesn't need its own customization for TF-A boot.
This will maintain the compatibility.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Sriram Dash <sriram.dash@nxp.com>
Cc: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Cc: Peng Ma <peng.ma@nxp.com>
Cc: Yuantian Tang <andy.tang@nxp.com>
Cc: Pankit Garg <pankit.garg@nxp.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 05606d9..602d61e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1100,6 +1100,7 @@
select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
+ select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
select SUPPORT_SPL
select FSL_DDR_INTERACTIVE if !SD_BOOT
@@ -1115,6 +1116,7 @@
select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
+ select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
select SUPPORT_SPL
imply SCSI
@@ -1133,6 +1135,7 @@
select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
+ select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
select SUPPORT_SPL
select FSL_DDR_BIST
@@ -1165,6 +1168,7 @@
select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
+ select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
help
Support for NXP LX2160ARDB platform.
@@ -1178,6 +1182,7 @@
select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
+ select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
help
Support for NXP LX2160AQDS platform.
@@ -1218,6 +1223,7 @@
bool "Support ls1012aqds"
select ARCH_LS1012A
select ARM64
+ select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
help
Support for Freescale LS1012AQDS platform.
@@ -1229,6 +1235,7 @@
bool "Support ls1012ardb"
select ARCH_LS1012A
select ARM64
+ select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
imply SCSI
imply SCSI_AHCI
@@ -1242,6 +1249,7 @@
bool "Support ls1012a2g5rdb"
select ARCH_LS1012A
select ARM64
+ select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
imply SCSI
help
@@ -1254,6 +1262,7 @@
bool "Support ls1012afrwy"
select ARCH_LS1012A
select ARM64
+ select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
imply SCSI
imply SCSI_AHCI
@@ -1267,6 +1276,7 @@
bool "Support ls1012afrdm"
select ARCH_LS1012A
select ARM64
+ select ARCH_SUPPORT_TFABOOT
help
Support for Freescale LS1012AFRDM platform.
The LS1012A Freedom board (FRDM) is a high-performance
@@ -1278,6 +1288,7 @@
select ARCH_LS1028A
select ARM64
select ARMV8_MULTIENTRY
+ select ARCH_SUPPORT_TFABOOT
help
Support for Freescale LS1028AQDS platform
The LS1028A Development System (QDS) is a high-performance
@@ -1289,6 +1300,7 @@
select ARCH_LS1028A
select ARM64
select ARMV8_MULTIENTRY
+ select ARCH_SUPPORT_TFABOOT
help
Support for Freescale LS1028ARDB platform
The LS1028A Development System (RDB) is a high-performance
@@ -1301,6 +1313,7 @@
select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
+ select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
select SUPPORT_SPL
select FSL_DDR_INTERACTIVE if !SD_BOOT
@@ -1359,6 +1372,7 @@
select ARCH_LS1043A
select ARM64
select ARMV8_MULTIENTRY
+ select ARCH_SUPPORT_TFABOOT
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select SUPPORT_SPL
@@ -1373,6 +1387,7 @@
select ARCH_LS1043A
select ARM64
select ARMV8_MULTIENTRY
+ select ARCH_SUPPORT_TFABOOT
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select SUPPORT_SPL
@@ -1384,6 +1399,7 @@
select ARCH_LS1046A
select ARM64
select ARMV8_MULTIENTRY
+ select ARCH_SUPPORT_TFABOOT
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select DM_SPI_FLASH if DM_SPI
@@ -1403,6 +1419,7 @@
select ARCH_LS1046A
select ARM64
select ARMV8_MULTIENTRY
+ select ARCH_SUPPORT_TFABOOT
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select DM_SPI_FLASH if DM_SPI
@@ -1422,6 +1439,7 @@
select ARCH_LS1046A
select ARM64
select ARMV8_MULTIENTRY
+ select ARCH_SUPPORT_TFABOOT
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select DM_SPI_FLASH if DM_SPI
@@ -1565,6 +1583,17 @@
endchoice
+config ARCH_SUPPORT_TFABOOT
+ bool
+
+config TFABOOT
+ bool "Support for booting from TF-A"
+ depends on ARCH_SUPPORT_TFABOOT
+ default n
+ help
+ Enabling this will make a U-Boot binary that is capable of being
+ booted via TF-A.
+
config TI_SECURE_DEVICE
bool "HS Device Type Support"
depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS || ARCH_K3
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 3f6c983..5c32738 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -623,10 +623,3 @@
help
For some SoC(such as LS1043A and LS1046A), USB and QE-HDLC multiplex use
pins, select it when the pins are assigned to USB.
-
-config TFABOOT
- bool "Support for booting from TFA"
- default n
- help
- Enabling this will make a U-Boot binary that is capable of being
- booted via TFA.