arm: mach-k3: j721e: clk-data.c: Add main_uart2 clock data
Add main_uart2 clocks in clk-data.c for J721E. Now,
main_uart2 clocks will be set up while booting the J721E SoC.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
diff --git a/arch/arm/mach-k3/j721e/clk-data.c b/arch/arm/mach-k3/j721e/clk-data.c
index 5ab7951..e451109 100644
--- a/arch/arm/mach-k3/j721e/clk-data.c
+++ b/arch/arm/mach-k3/j721e/clk-data.c
@@ -553,6 +553,7 @@
CLK_MUX("main_pll4_xref_sel_out0", main_pll4_xref_sel_out0_parents, 2, 0x43008090, 4, 1, 0),
CLK_MUX("mcu_clkout_mux_out0", mcu_clkout_mux_out0_parents, 2, 0x40f08010, 0, 1, 0),
CLK_DIV_DEFFREQ("usart_programmable_clock_divider_out0", "hsdiv4_16fft_main_1_hsdivout0_clk", 0x1081c0, 0, 2, 0, 0, 48000000),
+ CLK_DIV_DEFFREQ("usart_programmable_clock_divider_out2", "hsdiv4_16fft_main_1_hsdivout0_clk", 0x1081c8, 0, 2, 0, 0, 48000000),
CLK_DIV("hsdiv0_16fft_main_12_hsdivout0_clk", "pllfracf_ssmod_16fft_main_12_foutvcop_clk", 0x68c080, 0, 7, 0, 0),
CLK_DIV("hsdiv0_16fft_main_6_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_6_foutvcop_clk", 0x686080, 0, 7, 0, 0),
CLK_DIV("hsdiv0_16fft_main_7_hsdivout0_clk", "pllfrac2_ssmod_16fft_main_7_foutvcop_clk", 0x687080, 0, 7, 0, 0),
@@ -760,6 +761,8 @@
DEV_CLK(197, 4, "k3_pll_ctrl_wrap_wkup_0_chip_div1_clk_clk"),
DEV_CLK(202, 2, "hsdiv0_16fft_main_8_hsdivout0_clk"),
DEV_CLK(203, 0, "hsdiv0_16fft_main_8_hsdivout0_clk"),
+ DEV_CLK(279, 0, "usart_programmable_clock_divider_out2"),
+ DEV_CLK(279, 1, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
DEV_CLK(288, 3, "postdiv3_16fft_main_1_hsdivout7_clk"),
DEV_CLK(288, 4, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
DEV_CLK(288, 5, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
@@ -780,7 +783,7 @@
const struct ti_k3_clk_platdata j721e_clk_platdata = {
.clk_list = clk_list,
- .clk_list_cnt = 156,
+ .clk_list_cnt = 157,
.soc_dev_clk_data = soc_dev_clk_data,
- .soc_dev_clk_data_cnt = 171,
+ .soc_dev_clk_data_cnt = 173,
};