ARM: OMAP4+: Change the PRCM structure prototype common for all Socs
The current PRCM structure prototype directly matches the hardware
register layout. So there is a need to change this for every new silicon
revision which has register space changes.
Avoiding this by making the prototye generic and populating the register
addresses seperately for all Socs.
Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
diff --git a/arch/arm/cpu/armv7/omap-common/vc.c b/arch/arm/cpu/armv7/omap-common/vc.c
index a045b77..e6e5f78 100644
--- a/arch/arm/cpu/armv7/omap-common/vc.c
+++ b/arch/arm/cpu/armv7/omap-common/vc.c
@@ -81,13 +81,13 @@
cycles_low -= 7;
val = (cycles_hi << PRM_VC_CFG_I2C_CLK_SCLH_SHIFT) |
(cycles_low << PRM_VC_CFG_I2C_CLK_SCLL_SHIFT);
- writel(val, &prcm->prm_vc_cfg_i2c_clk);
+ writel(val, (*prcm)->prm_vc_cfg_i2c_clk);
val = CONFIG_OMAP_VC_I2C_HS_MCODE <<
PRM_VC_CFG_I2C_MODE_HSMCODE_SHIFT;
/* No HS mode for now */
val &= ~PRM_VC_CFG_I2C_MODE_HSMODEEN_BIT;
- writel(val, &prcm->prm_vc_cfg_i2c_mode);
+ writel(val, (*prcm)->prm_vc_cfg_i2c_mode);
}
/**
@@ -113,14 +113,15 @@
reg_val = sa << PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT |
reg_addr << PRM_VC_VAL_BYPASS_REGADDR_SHIFT |
reg_data << PRM_VC_VAL_BYPASS_DATA_SHIFT;
- writel(reg_val, &prcm->prm_vc_val_bypass);
+ writel(reg_val, (*prcm)->prm_vc_val_bypass);
/* Signal VC to send data */
- writel(reg_val | PRM_VC_VAL_BYPASS_VALID_BIT, &prcm->prm_vc_val_bypass);
+ writel(reg_val | PRM_VC_VAL_BYPASS_VALID_BIT,
+ (*prcm)->prm_vc_val_bypass);
/* Wait on VC to complete transmission */
do {
- reg_val = readl(&prcm->prm_vc_val_bypass) &
+ reg_val = readl((*prcm)->prm_vc_val_bypass) &
PRM_VC_VAL_BYPASS_VALID_BIT;
if (!reg_val)
break;