doc: board: tegra: update device information
Adjust and update existing manuals to reflect the most recent
updates.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
diff --git a/doc/board/asus/grouper.rst b/doc/board/asus/grouper.rst
index d56a9ca..1446958 100644
--- a/doc/board/asus/grouper.rst
+++ b/doc/board/asus/grouper.rst
@@ -25,7 +25,7 @@
.. code-block:: bash
- $ export CROSS_COMPILE=arm-linux-gnueabi-
+ $ export CROSS_COMPILE=arm-none-eabi-
$ make grouper_defconfig # For all grouper versions and tilapia
$ make
@@ -79,18 +79,18 @@
*******************************
Nv3p is a custom Nvidia protocol used to recover bricked devices. Devices can
-enter it either by using ``wheelie`` with the correct ``blob.bin`` file or by
-pre-loading vendor bootloader with the Fusée Gelée.
+enter it by pre-loading vendor bootloader with the Fusée Gelée.
With nv3p, ``repart-block.bin`` is used. It contains BCT and a bootloader in
encrypted state in form, which can just be written RAW at the start of eMMC.
.. code-block:: bash
- $ wheelie --blob blob.bin
- $ nvflash --resume --rawdevicewrite 0 1024 repart-block.bin
+ $ ./run_bootloader.sh -s T30 -t ./bct/grouper.bct -b android_bootloader.bin
+ $ ./utiils/nvflash_v1.13.87205 --resume --rawdevicewrite 0 1024 repart-block.bin
-When flashing is done, reboot the device.
+When flashing is done, reboot the device. Note that if you have cellular version,
+use ``tilapia.bct``.
Flashing with a pre-loaded U-Boot
*********************************