arm: mvebu: Add gdsys ControlCenter-Compact board
The gdsys ControlCenter Digital board is based on a Marvell Armada 38x
SOC.
It boots from SPI-Flash but can be configured to boot from SD-card for
factory programming and testing.
On board peripherals include:
- 2 x GbE
- Xilinx Kintex-7 FPGA connected via PCIe
- mSATA
- USB3 host
- Atmel TPM
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Signed-off-by: Stefan Roese <sr@denx.de>
diff --git a/arch/arm/dts/armada-38x-controlcenterdc.dts b/arch/arm/dts/armada-38x-controlcenterdc.dts
new file mode 100644
index 0000000..d183fd7
--- /dev/null
+++ b/arch/arm/dts/armada-38x-controlcenterdc.dts
@@ -0,0 +1,589 @@
+/*
+ * Device Tree file for the Guntermann & Drunck ControlCenter-Compact board
+ *
+ * Copyright (C) 2016 Mario Six <mario.six@gdsys.cc>
+ *
+ * based on the Device Tree file for Marvell Armada 388 evaluation board
+ * (DB-88F6820), which is
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "armada-388.dtsi"
+
+&gpio0 {
+ u-boot,dm-pre-reloc;
+};
+
+&gpio1 {
+ u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+};
+
+&uart1 {
+ u-boot,dm-pre-reloc;
+};
+
+/ {
+ model = "Controlcenter Digital Compact";
+ compatible = "marvell,a385-db", "marvell,armada388",
+ "marvell,armada385", "marvell,armada380";
+
+ chosen {
+ bootargs = "console=ttyS1,115200 earlyprintk";
+ stdout-path = "/soc/internal-regs/serial@12100";
+ };
+
+ aliases {
+ ethernet0 = ð0;
+ ethernet2 = ð2;
+ mdio-gpio0 = &MDIO0;
+ mdio-gpio1 = &MDIO1;
+ mdio-gpio2 = &MDIO2;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ i2c0 = &I2C0;
+ i2c1 = &I2C1;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>; /* 256 MB */
+ };
+
+ clocks {
+ sc16isclk: sc16isclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <11059200>;
+ };
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+ internal-regs {
+ spi0: spi@10600 {
+ status = "okay";
+ sc16is741: sc16is741@0 {
+ compatible = "nxp,sc16is741";
+ reg = <0>;
+ clocks = <&sc16isclk>;
+ spi-max-frequency = <4000000>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ spi1: spi@10680 {
+ status = "okay";
+ u-boot,dm-pre-reloc;
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q016a";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <108000000>;
+ };
+ spi-flash@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q128a11";
+ reg = <1>; /* Chip select 1 */
+ spi-max-frequency = <108000000>;
+ u-boot,dm-pre-reloc;
+ };
+ };
+
+ I2C0: i2c@11000 {
+ status = "okay";
+ clock-frequency = <1000000>;
+ u-boot,dm-pre-reloc;
+ PCA21: pca9698@21 {
+ compatible = "nxp,pca9698";
+ reg = <0x21>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+ PCA22: pca9698@22 {
+ compatible = "nxp,pca9698";
+ u-boot,dm-pre-reloc;
+ reg = <0x22>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+ PCA23: pca9698@23 {
+ compatible = "nxp,pca9698";
+ reg = <0x23>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+ PCA24: pca9698@24 {
+ compatible = "nxp,pca9698";
+ reg = <0x24>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+ PCA25: pca9698@25 {
+ compatible = "nxp,pca9698";
+ reg = <0x25>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+ PCA26: pca9698@26 {
+ compatible = "nxp,pca9698";
+ reg = <0x26>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+ };
+
+ I2C1: i2c@11100 {
+ status = "okay";
+ clock-frequency = <400000>;
+ at97sc3205t@29 {
+ compatible = "atmel,at97sc3204t";
+ reg = <0x29>;
+ u-boot,i2c-offset-len = <0>;
+ };
+ emc2305@2d {
+ compatible = "smsc,emc2305";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2d>;
+ fan@0 {
+ reg = <0>;
+ };
+ fan@1 {
+ reg = <1>;
+ };
+ fan@2 {
+ reg = <2>;
+ };
+ fan@3 {
+ reg = <3>;
+ };
+ fan@4 {
+ reg = <4>;
+ };
+ };
+ lm77@48 {
+ compatible = "national,lm77";
+ reg = <0x48>;
+ };
+ ads1015@49 {
+ compatible = "ti,ads1015";
+ reg = <0x49>;
+ };
+ lm77@4a {
+ compatible = "national,lm77";
+ reg = <0x4a>;
+ };
+ ads1015@4b {
+ compatible = "ti,ads1015";
+ reg = <0x4b>;
+ };
+ emc2305@4c {
+ compatible = "smsc,emc2305";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4c>;
+ fan@0 {
+ reg = <0>;
+ };
+ fan@1 {
+ reg = <1>;
+ };
+ fan@2 {
+ reg = <2>;
+ };
+ fan@3 {
+ reg = <3>;
+ };
+ fan@4 {
+ reg = <4>;
+ };
+ };
+ at24c512@54 {
+ compatible = "atmel,24c512";
+ reg = <0x54>;
+ u-boot,i2c-offset-len = <2>;
+ };
+ ds1339@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
+ serial@12000 {
+ status = "okay";
+ };
+
+ serial@12100 {
+ status = "okay";
+ };
+
+ ethernet@34000 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "sgmii";
+ };
+
+ usb@58000 {
+ status = "ok";
+ };
+
+ ethernet@70000 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "sgmii";
+ };
+
+ mdio@72004 {
+ phy0: ethernet-phy@0 {
+ reg = <1>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <0>;
+ };
+ };
+
+ sata@a8000 {
+ status = "okay";
+ };
+
+ sdhci@d8000 {
+ broken-cd;
+ wp-inverted;
+ bus-width = <4>;
+ status = "okay";
+ no-1-8-v;
+ };
+
+ usb3@f0000 {
+ status = "okay";
+ };
+ };
+
+ pcie-controller {
+ status = "okay";
+ /*
+ * The two PCIe units are accessible through
+ * standard PCIe slots on the board.
+ */
+ pcie@3,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+ };
+
+ MDIO0: mdio0 {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = < /*MDC*/ &gpio0 13 0
+ /*MDIO*/ &gpio0 14 0>;
+ mv88e1240@0 {
+ reg = <0x0>;
+ };
+ mv88e1240@1 {
+ reg = <0x1>;
+ };
+ mv88e1240@2 {
+ reg = <0x2>;
+ };
+ mv88e1240@3 {
+ reg = <0x3>;
+ };
+ mv88e1240@4 {
+ reg = <0x4>;
+ };
+ mv88e1240@5 {
+ reg = <0x5>;
+ };
+ mv88e1240@6 {
+ reg = <0x6>;
+ };
+ mv88e1240@7 {
+ reg = <0x7>;
+ };
+ mv88e1240@8 {
+ reg = <0x8>;
+ };
+ mv88e1240@9 {
+ reg = <0x9>;
+ };
+ mv88e1240@a {
+ reg = <0xa>;
+ };
+ mv88e1240@b {
+ reg = <0xb>;
+ };
+ mv88e1240@c {
+ reg = <0xc>;
+ };
+ mv88e1240@d {
+ reg = <0xd>;
+ };
+ mv88e1240@e {
+ reg = <0xe>;
+ };
+ mv88e1240@f {
+ reg = <0xf>;
+ };
+ mv88e1240@10 {
+ reg = <0x10>;
+ };
+ mv88e1240@11 {
+ reg = <0x11>;
+ };
+ mv88e1240@12 {
+ reg = <0x12>;
+ };
+ mv88e1240@13 {
+ reg = <0x13>;
+ };
+ mv88e1240@14 {
+ reg = <0x14>;
+ };
+ mv88e1240@15 {
+ reg = <0x15>;
+ };
+ mv88e1240@16 {
+ reg = <0x16>;
+ };
+ mv88e1240@17 {
+ reg = <0x17>;
+ };
+ mv88e1240@18 {
+ reg = <0x18>;
+ };
+ mv88e1240@19 {
+ reg = <0x19>;
+ };
+ mv88e1240@1a {
+ reg = <0x1a>;
+ };
+ mv88e1240@1b {
+ reg = <0x1b>;
+ };
+ mv88e1240@1c {
+ reg = <0x1c>;
+ };
+ mv88e1240@1d {
+ reg = <0x1d>;
+ };
+ mv88e1240@1e {
+ reg = <0x1e>;
+ };
+ mv88e1240@1f {
+ reg = <0x1f>;
+ };
+ };
+
+ MDIO1: mdio1 {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = < /*MDC*/ &gpio0 25 0
+ /*MDIO*/ &gpio1 13 0>;
+ mv88e1240@0 {
+ reg = <0x0>;
+ };
+ mv88e1240@1 {
+ reg = <0x1>;
+ };
+ mv88e1240@2 {
+ reg = <0x2>;
+ };
+ mv88e1240@3 {
+ reg = <0x3>;
+ };
+ mv88e1240@4 {
+ reg = <0x4>;
+ };
+ mv88e1240@5 {
+ reg = <0x5>;
+ };
+ mv88e1240@6 {
+ reg = <0x6>;
+ };
+ mv88e1240@7 {
+ reg = <0x7>;
+ };
+ mv88e1240@8 {
+ reg = <0x8>;
+ };
+ mv88e1240@9 {
+ reg = <0x9>;
+ };
+ mv88e1240@a {
+ reg = <0xa>;
+ };
+ mv88e1240@b {
+ reg = <0xb>;
+ };
+ mv88e1240@c {
+ reg = <0xc>;
+ };
+ mv88e1240@d {
+ reg = <0xd>;
+ };
+ mv88e1240@e {
+ reg = <0xe>;
+ };
+ mv88e1240@f {
+ reg = <0xf>;
+ };
+ mv88e1240@10 {
+ reg = <0x10>;
+ };
+ mv88e1240@11 {
+ reg = <0x11>;
+ };
+ mv88e1240@12 {
+ reg = <0x12>;
+ };
+ mv88e1240@13 {
+ reg = <0x13>;
+ };
+ mv88e1240@14 {
+ reg = <0x14>;
+ };
+ mv88e1240@15 {
+ reg = <0x15>;
+ };
+ mv88e1240@16 {
+ reg = <0x16>;
+ };
+ mv88e1240@17 {
+ reg = <0x17>;
+ };
+ mv88e1240@18 {
+ reg = <0x18>;
+ };
+ mv88e1240@19 {
+ reg = <0x19>;
+ };
+ mv88e1240@1a {
+ reg = <0x1a>;
+ };
+ mv88e1240@1b {
+ reg = <0x1b>;
+ };
+ mv88e1240@1c {
+ reg = <0x1c>;
+ };
+ mv88e1240@1d {
+ reg = <0x1d>;
+ };
+ mv88e1240@1e {
+ reg = <0x1e>;
+ };
+ mv88e1240@1f {
+ reg = <0x1f>;
+ };
+ };
+
+ MDIO2: mdio2 {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = < /*MDC*/ &gpio1 14 0
+ /*MDIO*/ &gpio0 24 0>;
+ mv88e1240@0 {
+ reg = <0x0>;
+ };
+ mv88e1240@1 {
+ reg = <0x1>;
+ };
+ mv88e1240@2 {
+ reg = <0x2>;
+ };
+ mv88e1240@3 {
+ reg = <0x3>;
+ };
+ mv88e1240@4 {
+ reg = <0x4>;
+ };
+ mv88e1240@5 {
+ reg = <0x5>;
+ };
+ mv88e1240@6 {
+ reg = <0x6>;
+ };
+ mv88e1240@7 {
+ reg = <0x7>;
+ };
+ mv88e1240@8 {
+ reg = <0x8>;
+ };
+ mv88e1240@9 {
+ reg = <0x9>;
+ };
+ mv88e1240@a {
+ reg = <0xa>;
+ };
+ mv88e1240@b {
+ reg = <0xb>;
+ };
+ mv88e1240@c {
+ reg = <0xc>;
+ };
+ mv88e1240@d {
+ reg = <0xd>;
+ };
+ mv88e1240@e {
+ reg = <0xe>;
+ };
+ mv88e1240@f {
+ reg = <0xf>;
+ };
+ mv88e1240@10 {
+ reg = <0x10>;
+ };
+ mv88e1240@11 {
+ reg = <0x11>;
+ };
+ mv88e1240@12 {
+ reg = <0x12>;
+ };
+ mv88e1240@13 {
+ reg = <0x13>;
+ };
+ mv88e1240@14 {
+ reg = <0x14>;
+ };
+ mv88e1240@15 {
+ reg = <0x15>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ finder_led {
+ label = "finder-led";
+ gpios = <&PCA22 25 0>;
+ };
+
+ status_led {
+ label = "status-led";
+ gpios = <&gpio0 29 0>;
+ };
+ };
+};