| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2010 Freescale Semiconductor, Inc. |
| * Copyright 2020 NXP |
| * |
| * Author: Priyanka Jain <Priyanka.Jain@freescale.com> |
| */ |
| |
| /* |
| * This file provides Date & Time support (no alarms) for PT7C4338 chip. |
| * |
| * This file is based on drivers/rtc/ds1337.c |
| * |
| * PT7C4338 chip is manufactured by Pericom Technology Inc. |
| * It is a serial real-time clock which provides |
| * 1)Low-power clock/calendar. |
| * 2)Programmable square-wave output. |
| * It has 56 bytes of nonvolatile RAM. |
| */ |
| |
| #include <config.h> |
| #include <command.h> |
| #include <dm.h> |
| #include <log.h> |
| #include <rtc.h> |
| #include <i2c.h> |
| |
| /* RTC register addresses */ |
| #define RTC_SEC_REG_ADDR 0x0 |
| #define RTC_MIN_REG_ADDR 0x1 |
| #define RTC_HR_REG_ADDR 0x2 |
| #define RTC_DAY_REG_ADDR 0x3 |
| #define RTC_DATE_REG_ADDR 0x4 |
| #define RTC_MON_REG_ADDR 0x5 |
| #define RTC_YR_REG_ADDR 0x6 |
| #define RTC_CTL_STAT_REG_ADDR 0x7 |
| |
| /* RTC second register address bit */ |
| #define RTC_SEC_BIT_CH 0x80 /* Clock Halt (in Register 0) */ |
| |
| /* RTC control and status register bits */ |
| #define RTC_CTL_STAT_BIT_RS0 0x1 /* Rate select 0 */ |
| #define RTC_CTL_STAT_BIT_RS1 0x2 /* Rate select 1 */ |
| #define RTC_CTL_STAT_BIT_SQWE 0x10 /* Square Wave Enable */ |
| #define RTC_CTL_STAT_BIT_OSF 0x20 /* Oscillator Stop Flag */ |
| #define RTC_CTL_STAT_BIT_OUT 0x80 /* Output Level Control */ |
| |
| /* RTC reset value */ |
| #define RTC_PT7C4338_RESET_VAL \ |
| (RTC_CTL_STAT_BIT_RS0 | RTC_CTL_STAT_BIT_RS1 | RTC_CTL_STAT_BIT_OUT) |
| |
| #if !CONFIG_IS_ENABLED(DM_RTC) |
| /****** Helper functions ****************************************/ |
| static u8 rtc_read(u8 reg) |
| { |
| return i2c_reg_read(CFG_SYS_I2C_RTC_ADDR, reg); |
| } |
| |
| static void rtc_write(u8 reg, u8 val) |
| { |
| i2c_reg_write(CFG_SYS_I2C_RTC_ADDR, reg, val); |
| } |
| /****************************************************************/ |
| |
| /* Get the current time from the RTC */ |
| int rtc_get(struct rtc_time *tmp) |
| { |
| int ret = 0; |
| u8 sec, min, hour, mday, wday, mon, year, ctl_stat; |
| |
| ctl_stat = rtc_read(RTC_CTL_STAT_REG_ADDR); |
| sec = rtc_read(RTC_SEC_REG_ADDR); |
| min = rtc_read(RTC_MIN_REG_ADDR); |
| hour = rtc_read(RTC_HR_REG_ADDR); |
| wday = rtc_read(RTC_DAY_REG_ADDR); |
| mday = rtc_read(RTC_DATE_REG_ADDR); |
| mon = rtc_read(RTC_MON_REG_ADDR); |
| year = rtc_read(RTC_YR_REG_ADDR); |
| debug("Get RTC year: %02x mon: %02x mday: %02x wday: %02x " |
| "hr: %02x min: %02x sec: %02x control_status: %02x\n", |
| year, mon, mday, wday, hour, min, sec, ctl_stat); |
| |
| if (ctl_stat & RTC_CTL_STAT_BIT_OSF) { |
| printf("### Warning: RTC oscillator has stopped\n"); |
| /* clear the OSF flag */ |
| rtc_write(RTC_CTL_STAT_REG_ADDR, |
| rtc_read(RTC_CTL_STAT_REG_ADDR)\ |
| & ~RTC_CTL_STAT_BIT_OSF); |
| ret = -1; |
| } |
| |
| tmp->tm_sec = bcd2bin(sec & 0x7F); |
| tmp->tm_min = bcd2bin(min & 0x7F); |
| tmp->tm_hour = bcd2bin(hour & 0x3F); |
| tmp->tm_mday = bcd2bin(mday & 0x3F); |
| tmp->tm_mon = bcd2bin(mon & 0x1F); |
| tmp->tm_year = bcd2bin(year) + 2000; |
| tmp->tm_wday = bcd2bin((wday - 1) & 0x07); |
| tmp->tm_yday = 0; |
| tmp->tm_isdst = 0; |
| debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", |
| tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, |
| tmp->tm_hour, tmp->tm_min, tmp->tm_sec); |
| |
| return ret; |
| } |
| |
| /* Set the RTC */ |
| int rtc_set(struct rtc_time *tmp) |
| { |
| debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", |
| tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, |
| tmp->tm_hour, tmp->tm_min, tmp->tm_sec); |
| |
| rtc_write(RTC_YR_REG_ADDR, bin2bcd(tmp->tm_year % 100)); |
| rtc_write(RTC_MON_REG_ADDR, bin2bcd(tmp->tm_mon)); |
| rtc_write(RTC_DAY_REG_ADDR, bin2bcd(tmp->tm_wday + 1)); |
| rtc_write(RTC_DATE_REG_ADDR, bin2bcd(tmp->tm_mday)); |
| rtc_write(RTC_HR_REG_ADDR, bin2bcd(tmp->tm_hour)); |
| rtc_write(RTC_MIN_REG_ADDR, bin2bcd(tmp->tm_min)); |
| rtc_write(RTC_SEC_REG_ADDR, bin2bcd(tmp->tm_sec)); |
| |
| return 0; |
| } |
| |
| /* Reset the RTC */ |
| void rtc_reset(void) |
| { |
| rtc_write(RTC_SEC_REG_ADDR, 0x00); /* clearing Clock Halt */ |
| rtc_write(RTC_CTL_STAT_REG_ADDR, RTC_PT7C4338_RESET_VAL); |
| } |
| #else |
| static u8 rtc_read(struct udevice *dev, u8 reg) |
| { |
| return dm_i2c_reg_read(dev, reg); |
| } |
| |
| static void rtc_write(struct udevice *dev, u8 reg, u8 val) |
| { |
| dm_i2c_reg_write(dev, reg, val); |
| } |
| |
| static int pt7c4338_rtc_get(struct udevice *dev, struct rtc_time *tmp) |
| { |
| int ret = 0; |
| u8 sec, min, hour, mday, wday, mon, year, ctl_stat; |
| |
| ctl_stat = rtc_read(dev, RTC_CTL_STAT_REG_ADDR); |
| sec = rtc_read(dev, RTC_SEC_REG_ADDR); |
| min = rtc_read(dev, RTC_MIN_REG_ADDR); |
| hour = rtc_read(dev, RTC_HR_REG_ADDR); |
| wday = rtc_read(dev, RTC_DAY_REG_ADDR); |
| mday = rtc_read(dev, RTC_DATE_REG_ADDR); |
| mon = rtc_read(dev, RTC_MON_REG_ADDR); |
| year = rtc_read(dev, RTC_YR_REG_ADDR); |
| debug("Get RTC year: %02x mon: %02x mday: %02x wday: %02x\n", |
| year, mon, mday, wday); |
| debug("hr: %02x min: %02x sec: %02x control_status: %02x\n", |
| hour, min, sec, ctl_stat); |
| |
| if (ctl_stat & RTC_CTL_STAT_BIT_OSF) { |
| printf("### Warning: RTC oscillator has stopped\n"); |
| /* clear the OSF flag */ |
| rtc_write(dev, RTC_CTL_STAT_REG_ADDR, |
| rtc_read(dev, |
| RTC_CTL_STAT_REG_ADDR) |
| & ~RTC_CTL_STAT_BIT_OSF); |
| ret = -1; |
| } |
| |
| tmp->tm_sec = bcd2bin(sec & 0x7F); |
| tmp->tm_min = bcd2bin(min & 0x7F); |
| tmp->tm_hour = bcd2bin(hour & 0x3F); |
| tmp->tm_mday = bcd2bin(mday & 0x3F); |
| tmp->tm_mon = bcd2bin(mon & 0x1F); |
| tmp->tm_year = bcd2bin(year) + 2000; |
| tmp->tm_wday = bcd2bin((wday - 1) & 0x07); |
| tmp->tm_yday = 0; |
| tmp->tm_isdst = 0; |
| debug("Get DATE: %4d-%02d-%02d [wday=%d] TIME: %2d:%02d:%02d\n", |
| tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, |
| tmp->tm_hour, tmp->tm_min, tmp->tm_sec); |
| |
| return ret; |
| } |
| |
| static int pt7c4338_rtc_set(struct udevice *dev, const struct rtc_time *tmp) |
| { |
| debug("Set DATE: %4d-%02d-%02d [wday=%d] TIME: %2d:%02d:%02d\n", |
| tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, |
| tmp->tm_hour, tmp->tm_min, tmp->tm_sec); |
| |
| rtc_write(dev, RTC_YR_REG_ADDR, bin2bcd(tmp->tm_year % 100)); |
| rtc_write(dev, RTC_MON_REG_ADDR, bin2bcd(tmp->tm_mon)); |
| rtc_write(dev, RTC_DAY_REG_ADDR, bin2bcd(tmp->tm_wday + 1)); |
| rtc_write(dev, RTC_DATE_REG_ADDR, bin2bcd(tmp->tm_mday)); |
| rtc_write(dev, RTC_HR_REG_ADDR, bin2bcd(tmp->tm_hour)); |
| rtc_write(dev, RTC_MIN_REG_ADDR, bin2bcd(tmp->tm_min)); |
| rtc_write(dev, RTC_SEC_REG_ADDR, bin2bcd(tmp->tm_sec)); |
| |
| return 0; |
| } |
| |
| static int pt7c4338_rtc_reset(struct udevice *dev) |
| { |
| rtc_write(dev, RTC_SEC_REG_ADDR, 0x00); /* clearing Clock Halt */ |
| rtc_write(dev, RTC_CTL_STAT_REG_ADDR, RTC_PT7C4338_RESET_VAL); |
| return 0; |
| } |
| |
| static const struct rtc_ops pt7c4338_rtc_ops = { |
| .get = pt7c4338_rtc_get, |
| .set = pt7c4338_rtc_set, |
| .reset = pt7c4338_rtc_reset, |
| }; |
| |
| static const struct udevice_id pt7c4338_rtc_ids[] = { |
| { .compatible = "pericom,pt7c4338" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(rtc_pt7c4338) = { |
| .name = "rtc-pt7c4338", |
| .id = UCLASS_RTC, |
| .of_match = pt7c4338_rtc_ids, |
| .ops = &pt7c4338_rtc_ops, |
| }; |
| #endif |