| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2015 |
| * Kamil Lulko, <kamil.lulko@gmail.com> |
| */ |
| |
| #include <config.h> |
| #include <flash.h> |
| #include <asm/io.h> |
| #include <asm/arch/stm32.h> |
| #include "stm32_flash.h" |
| |
| flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; |
| |
| #define STM32_FLASH ((struct stm32_flash_regs *)STM32_FLASH_CNTL_BASE) |
| |
| void stm32_flash_latency_cfg(int latency) |
| { |
| /* 5 wait states, Prefetch enabled, D-Cache enabled, I-Cache enabled */ |
| writel(FLASH_ACR_WS(latency) | FLASH_ACR_PRFTEN | FLASH_ACR_ICEN |
| | FLASH_ACR_DCEN, &STM32_FLASH->acr); |
| } |
| |
| static void stm32_flash_lock(u8 lock) |
| { |
| if (lock) { |
| setbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_LOCK); |
| } else { |
| writel(STM32_FLASH_KEY1, &STM32_FLASH->key); |
| writel(STM32_FLASH_KEY2, &STM32_FLASH->key); |
| } |
| } |
| |
| unsigned long flash_init(void) |
| { |
| unsigned long total_size = 0; |
| u8 i, j; |
| |
| for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { |
| flash_info[i].flash_id = FLASH_STM32; |
| flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; |
| flash_info[i].start[0] = CFG_SYS_FLASH_BASE + (i << 20); |
| flash_info[i].size = sect_sz_kb[0]; |
| for (j = 1; j < CONFIG_SYS_MAX_FLASH_SECT; j++) { |
| flash_info[i].start[j] = flash_info[i].start[j - 1] |
| + (sect_sz_kb[j - 1]); |
| flash_info[i].size += sect_sz_kb[j]; |
| } |
| total_size += flash_info[i].size; |
| } |
| |
| return total_size; |
| } |
| |
| void flash_print_info(flash_info_t *info) |
| { |
| int i; |
| |
| if (info->flash_id == FLASH_UNKNOWN) { |
| printf("missing or unknown FLASH type\n"); |
| return; |
| } else if (info->flash_id == FLASH_STM32) { |
| printf("stm32 Embedded Flash\n"); |
| } |
| |
| printf(" Size: %ld MB in %d Sectors\n", |
| info->size >> 20, info->sector_count); |
| |
| printf(" Sector Start Addresses:"); |
| for (i = 0; i < info->sector_count; ++i) { |
| if ((i % 5) == 0) |
| printf("\n "); |
| printf(" %08lX%s", |
| info->start[i], |
| info->protect[i] ? " (RO)" : " "); |
| } |
| printf("\n"); |
| return; |
| } |
| |
| int flash_erase(flash_info_t *info, int first, int last) |
| { |
| u8 bank = 0xFF; |
| int i; |
| |
| for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { |
| if (info == &flash_info[i]) { |
| bank = i; |
| break; |
| } |
| } |
| if (bank == 0xFF) |
| return -1; |
| |
| stm32_flash_lock(0); |
| |
| for (i = first; i <= last; i++) { |
| while (readl(&STM32_FLASH->sr) & STM32_FLASH_SR_BSY) |
| ; |
| |
| /* clear old sector number before writing a new one */ |
| clrbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_SNB_MASK); |
| |
| if (bank == 0) { |
| setbits_le32(&STM32_FLASH->cr, |
| (i << STM32_FLASH_CR_SNB_OFFSET)); |
| } else if (bank == 1) { |
| setbits_le32(&STM32_FLASH->cr, |
| ((0x10 | i) << STM32_FLASH_CR_SNB_OFFSET)); |
| } else { |
| stm32_flash_lock(1); |
| return -1; |
| } |
| setbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_SER); |
| setbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_STRT); |
| |
| while (readl(&STM32_FLASH->sr) & STM32_FLASH_SR_BSY) |
| ; |
| |
| clrbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_SER); |
| } |
| |
| stm32_flash_lock(1); |
| return 0; |
| } |
| |
| int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) |
| { |
| ulong i; |
| |
| while (readl(&STM32_FLASH->sr) & STM32_FLASH_SR_BSY) |
| ; |
| |
| stm32_flash_lock(0); |
| |
| setbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_PG); |
| /* To make things simple use byte writes only */ |
| for (i = 0; i < cnt; i++) { |
| *(uchar *)(addr + i) = src[i]; |
| /* avoid re-ordering flash data write and busy status |
| * check as flash memory space attributes are generally Normal |
| */ |
| mb(); |
| while (readl(&STM32_FLASH->sr) & STM32_FLASH_SR_BSY) |
| ; |
| } |
| clrbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_PG); |
| stm32_flash_lock(1); |
| |
| return 0; |
| } |