| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Socionext F_SDH30 eMMC driver |
| * Copyright 2021 Linaro Ltd. |
| * Copyright 2021 Socionext, Inc. |
| */ |
| |
| #include <clk.h> |
| #include <dm.h> |
| #include <malloc.h> |
| #include <sdhci.h> |
| |
| #define F_SDH30_ESD_CONTROL 0x124 |
| #define F_SDH30_CMD_DAT_DELAY BIT(9) |
| |
| #define F_SDH30_TEST 0x158 |
| #define F_SDH30_FORCE_CARD_INSERT BIT(6) |
| |
| struct f_sdh30_data { |
| void (*init)(struct udevice *dev); |
| u32 quirks; |
| }; |
| |
| struct f_sdh30_plat { |
| struct mmc_config cfg; |
| struct mmc mmc; |
| |
| bool enable_cmd_dat_delay; |
| const struct f_sdh30_data *data; |
| }; |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static void f_sdh30_e51_init(struct udevice *dev) |
| { |
| struct f_sdh30_plat *plat = dev_get_plat(dev); |
| struct sdhci_host *host = dev_get_priv(dev); |
| u32 val; |
| |
| val = sdhci_readl(host, F_SDH30_ESD_CONTROL); |
| if (plat->enable_cmd_dat_delay) |
| val |= F_SDH30_CMD_DAT_DELAY; |
| else |
| val &= ~F_SDH30_CMD_DAT_DELAY; |
| sdhci_writel(host, val, F_SDH30_ESD_CONTROL); |
| |
| val = sdhci_readl(host, F_SDH30_TEST); |
| if (plat->cfg.host_caps & MMC_CAP_NONREMOVABLE) |
| val |= F_SDH30_FORCE_CARD_INSERT; |
| else |
| val &= ~F_SDH30_FORCE_CARD_INSERT; |
| sdhci_writel(host, val, F_SDH30_TEST); |
| } |
| |
| static int f_sdh30_sdhci_probe(struct udevice *dev) |
| { |
| struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); |
| struct f_sdh30_plat *plat = dev_get_plat(dev); |
| struct sdhci_host *host = dev_get_priv(dev); |
| int ret; |
| |
| plat->data = (const struct f_sdh30_data *)dev_get_driver_data(dev); |
| |
| ret = mmc_of_parse(dev, &plat->cfg); |
| if (ret) |
| return ret; |
| |
| host->mmc = &plat->mmc; |
| host->mmc->dev = dev; |
| host->mmc->priv = host; |
| |
| if (plat->data && plat->data->quirks) |
| host->quirks = plat->data->quirks; |
| |
| ret = sdhci_setup_cfg(&plat->cfg, host, 200000000, 400000); |
| if (ret) |
| return ret; |
| |
| upriv->mmc = host->mmc; |
| |
| mmc_set_clock(host->mmc, host->mmc->cfg->f_min, MMC_CLK_ENABLE); |
| |
| ret = sdhci_probe(dev); |
| if (ret) |
| return ret; |
| |
| if (plat->data && plat->data->init) |
| plat->data->init(dev); |
| |
| return 0; |
| } |
| |
| static int f_sdh30_of_to_plat(struct udevice *dev) |
| { |
| struct sdhci_host *host = dev_get_priv(dev); |
| struct f_sdh30_plat *plat = dev_get_plat(dev); |
| |
| host->name = strdup(dev->name); |
| host->ioaddr = dev_read_addr_ptr(dev); |
| host->bus_width = dev_read_u32_default(dev, "bus-width", 4); |
| host->index = dev_read_u32_default(dev, "index", 0); |
| |
| plat->enable_cmd_dat_delay = |
| dev_read_bool(dev, "socionext,enable-cmd-dat-delay"); |
| |
| return 0; |
| } |
| |
| static int f_sdh30_bind(struct udevice *dev) |
| { |
| struct f_sdh30_plat *plat = dev_get_plat(dev); |
| |
| return sdhci_bind(dev, &plat->mmc, &plat->cfg); |
| } |
| |
| static const struct f_sdh30_data f_sdh30_e51_data = { |
| .init = f_sdh30_e51_init, |
| .quirks = SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_SUPPORT_SINGLE, |
| }; |
| |
| static const struct udevice_id f_sdh30_mmc_ids[] = { |
| { |
| .compatible = "fujitsu,mb86s70-sdhci-3.0", |
| }, |
| { |
| .compatible = "socionext,f-sdh30-e51-mmc", |
| .data = (ulong)&f_sdh30_e51_data, |
| }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(f_sdh30_drv) = { |
| .name = "f_sdh30_sdhci", |
| .id = UCLASS_MMC, |
| .of_match = f_sdh30_mmc_ids, |
| .of_to_plat = f_sdh30_of_to_plat, |
| .ops = &sdhci_ops, |
| .bind = f_sdh30_bind, |
| .probe = f_sdh30_sdhci_probe, |
| .priv_auto = sizeof(struct sdhci_host), |
| .plat_auto = sizeof(struct f_sdh30_plat), |
| }; |