| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2015 Stefan Roese <sr@denx.de> |
| */ |
| |
| #include <errno.h> |
| #include <i2c.h> |
| #include <status_led.h> |
| |
| #ifndef CONFIG_PCA9551_I2C_ADDR |
| #error "CONFIG_PCA9551_I2C_ADDR not defined!" |
| #endif |
| |
| #define PCA9551_REG_INPUT 0x00 /* Input register (read only) */ |
| #define PCA9551_REG_PSC0 0x01 /* Frequency prescaler 0 */ |
| #define PCA9551_REG_PWM0 0x02 /* PWM0 */ |
| #define PCA9551_REG_PSC1 0x03 /* Frequency prescaler 1 */ |
| #define PCA9551_REG_PWM1 0x04 /* PWM1 */ |
| #define PCA9551_REG_LS0 0x05 /* LED0 to LED3 selector */ |
| #define PCA9551_REG_LS1 0x06 /* LED4 to LED7 selector */ |
| |
| #define PCA9551_CTRL_AI (1 << 4) /* Auto-increment flag */ |
| |
| #define PCA9551_LED_STATE_ON 0x00 |
| #define PCA9551_LED_STATE_OFF 0x01 |
| #define PCA9551_LED_STATE_BLINK0 0x02 |
| #define PCA9551_LED_STATE_BLINK1 0x03 |
| |
| struct pca9551_blink_rate { |
| u8 psc; /* Frequency preescaler, see PCA9551_7.pdf p. 6 */ |
| u8 pwm; /* Pulse width modulation, see PCA9551_7.pdf p. 6 */ |
| }; |
| |
| static int freq_last = -1; |
| static int mask_last = -1; |
| static int idx_last = -1; |
| static int mode_last; |
| |
| static int pca9551_led_get_state(int led, int *state) |
| { |
| unsigned int reg; |
| u8 shift, buf; |
| int ret; |
| |
| if (led < 0 || led > 7) { |
| return -EINVAL; |
| } else if (led < 4) { |
| reg = PCA9551_REG_LS0; |
| shift = led << 1; |
| } else { |
| reg = PCA9551_REG_LS1; |
| shift = (led - 4) << 1; |
| } |
| |
| ret = i2c_read(CONFIG_PCA9551_I2C_ADDR, reg, 1, &buf, 1); |
| if (ret) |
| return ret; |
| |
| *state = (buf >> shift) & 0x03; |
| return 0; |
| } |
| |
| static int pca9551_led_set_state(int led, int state) |
| { |
| unsigned int reg; |
| u8 shift, buf, mask; |
| int ret; |
| |
| if (led < 0 || led > 7) { |
| return -EINVAL; |
| } else if (led < 4) { |
| reg = PCA9551_REG_LS0; |
| shift = led << 1; |
| } else { |
| reg = PCA9551_REG_LS1; |
| shift = (led - 4) << 1; |
| } |
| mask = 0x03 << shift; |
| |
| ret = i2c_read(CONFIG_PCA9551_I2C_ADDR, reg, 1, &buf, 1); |
| if (ret) |
| return ret; |
| |
| buf = (buf & ~mask) | ((state & 0x03) << shift); |
| |
| ret = i2c_write(CONFIG_PCA9551_I2C_ADDR, reg, 1, &buf, 1); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int pca9551_led_set_blink_rate(int idx, struct pca9551_blink_rate rate) |
| { |
| unsigned int reg; |
| int ret; |
| |
| switch (idx) { |
| case 0: |
| reg = PCA9551_REG_PSC0; |
| break; |
| case 1: |
| reg = PCA9551_REG_PSC1; |
| break; |
| default: |
| return -EINVAL; |
| } |
| reg |= PCA9551_CTRL_AI; |
| |
| ret = i2c_write(CONFIG_PCA9551_I2C_ADDR, reg, 1, (u8 *)&rate, 2); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| /* |
| * Functions referenced by cmd_led.c or status_led.c |
| */ |
| void __led_init(led_id_t id, int state) |
| { |
| } |
| |
| void __led_set(led_id_t mask, int state) |
| { |
| if (state == CONFIG_LED_STATUS_OFF) |
| pca9551_led_set_state(mask, PCA9551_LED_STATE_OFF); |
| else |
| pca9551_led_set_state(mask, PCA9551_LED_STATE_ON); |
| } |
| |
| void __led_toggle(led_id_t mask) |
| { |
| int state = 0; |
| |
| pca9551_led_get_state(mask, &state); |
| pca9551_led_set_state(mask, !state); |
| } |
| |
| void __led_blink(led_id_t mask, int freq) |
| { |
| struct pca9551_blink_rate rate; |
| int mode; |
| int idx; |
| |
| if ((freq == freq_last) || (mask == mask_last)) { |
| idx = idx_last; |
| mode = mode_last; |
| } else { |
| /* Toggle blink index */ |
| if (idx_last == 0) { |
| idx = 1; |
| mode = PCA9551_LED_STATE_BLINK1; |
| } else { |
| idx = 0; |
| mode = PCA9551_LED_STATE_BLINK0; |
| } |
| |
| idx_last = idx; |
| mode_last = mode; |
| } |
| freq_last = freq; |
| mask_last = mask; |
| |
| rate.psc = ((freq * 38) / 1000) - 1; |
| rate.pwm = 128; /* 50% duty cycle */ |
| |
| pca9551_led_set_blink_rate(idx, rate); |
| pca9551_led_set_state(mask, mode); |
| } |