| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2002 |
| * Rich Ireland, Enterasys Networks, rireland@enterasys.com. |
| */ |
| |
| /* Generic FPGA support */ |
| #include <init.h> |
| #include <log.h> |
| #include <xilinx.h> /* xilinx specific definitions */ |
| #include <altera.h> /* altera specific definitions */ |
| #include <lattice.h> |
| #include <dm/device_compat.h> |
| |
| /* Local static data */ |
| static int next_desc = FPGA_INVALID_DEVICE; |
| static fpga_desc desc_table[CONFIG_MAX_FPGA_DEVICES]; |
| |
| /* |
| * fpga_no_sup |
| * 'no support' message function |
| */ |
| static void fpga_no_sup(char *fn, char *msg) |
| { |
| if (fn && msg) |
| printf("%s: No support for %s.\n", fn, msg); |
| else if (msg) |
| printf("No support for %s.\n", msg); |
| else |
| printf("No FPGA support!\n"); |
| } |
| |
| /* fpga_get_desc |
| * map a device number to a descriptor |
| */ |
| const fpga_desc *const fpga_get_desc(int devnum) |
| { |
| fpga_desc *desc = (fpga_desc *)NULL; |
| |
| if ((devnum >= 0) && (devnum < next_desc)) { |
| desc = &desc_table[devnum]; |
| debug("%s: found fpga descriptor #%d @ 0x%p\n", |
| __func__, devnum, desc); |
| } |
| |
| return desc; |
| } |
| |
| /* |
| * fpga_validate |
| * generic parameter checking code |
| */ |
| const fpga_desc *const fpga_validate(int devnum, const void *buf, |
| size_t bsize, char *fn) |
| { |
| const fpga_desc *desc = fpga_get_desc(devnum); |
| |
| if (!desc) |
| printf("%s: Invalid device number %d\n", fn, devnum); |
| |
| if (!buf) { |
| printf("%s: Null buffer.\n", fn); |
| return (fpga_desc * const)NULL; |
| } |
| return desc; |
| } |
| |
| /* |
| * fpga_dev_info |
| * generic multiplexing code |
| */ |
| static int fpga_dev_info(int devnum) |
| { |
| int ret_val = FPGA_FAIL; /* assume failure */ |
| const fpga_desc * const desc = fpga_get_desc(devnum); |
| |
| if (desc) { |
| debug("%s: Device Descriptor @ 0x%p\n", |
| __func__, desc->devdesc); |
| |
| switch (desc->devtype) { |
| case fpga_xilinx: |
| #if defined(CONFIG_FPGA_XILINX) |
| printf("Xilinx Device\nDescriptor @ 0x%p\n", desc); |
| ret_val = xilinx_info(desc->devdesc); |
| #else |
| fpga_no_sup((char *)__func__, "Xilinx devices"); |
| #endif |
| break; |
| case fpga_altera: |
| #if defined(CONFIG_FPGA_ALTERA) |
| printf("Altera Device\nDescriptor @ 0x%p\n", desc); |
| ret_val = altera_info(desc->devdesc); |
| #else |
| fpga_no_sup((char *)__func__, "Altera devices"); |
| #endif |
| break; |
| case fpga_lattice: |
| #if defined(CONFIG_FPGA_LATTICE) |
| printf("Lattice Device\nDescriptor @ 0x%p\n", desc); |
| ret_val = lattice_info(desc->devdesc); |
| #else |
| fpga_no_sup((char *)__func__, "Lattice devices"); |
| #endif |
| break; |
| default: |
| printf("%s: Invalid or unsupported device type %d\n", |
| __func__, desc->devtype); |
| } |
| } else { |
| printf("%s: Invalid device number %d\n", __func__, devnum); |
| } |
| |
| return ret_val; |
| } |
| |
| /* |
| * fpga_init is usually called from misc_init_r() and MUST be called |
| * before any of the other fpga functions are used. |
| */ |
| void fpga_init(void) |
| { |
| next_desc = 0; |
| memset(desc_table, 0, sizeof(desc_table)); |
| |
| debug("%s\n", __func__); |
| } |
| |
| /* |
| * fpga_count |
| * Basic interface function to get the current number of devices available. |
| */ |
| int fpga_count(void) |
| { |
| return next_desc; |
| } |
| |
| /* |
| * fpga_add |
| * Add the device descriptor to the device table. |
| */ |
| int fpga_add(fpga_type devtype, void *desc) |
| { |
| int devnum = FPGA_INVALID_DEVICE; |
| |
| if (!desc) { |
| printf("%s: NULL device descriptor\n", __func__); |
| return devnum; |
| } |
| |
| if (next_desc < 0) { |
| printf("%s: FPGA support not initialized!\n", __func__); |
| } else if ((devtype > fpga_min_type) && (devtype < fpga_undefined)) { |
| if (next_desc < CONFIG_MAX_FPGA_DEVICES) { |
| devnum = next_desc; |
| desc_table[next_desc].devtype = devtype; |
| desc_table[next_desc++].devdesc = desc; |
| } else { |
| printf("%s: Exceeded Max FPGA device count\n", |
| __func__); |
| } |
| } else { |
| printf("%s: Unsupported FPGA type %d\n", __func__, devtype); |
| } |
| |
| return devnum; |
| } |
| |
| /* |
| * Return 1 if the fpga data is partial. |
| * This is only required for fpga drivers that support bitstream_type. |
| */ |
| int __weak fpga_is_partial_data(int devnum, size_t img_len) |
| { |
| return 0; |
| } |
| |
| /* |
| * Convert bitstream data and load into the fpga |
| */ |
| int __weak fpga_loadbitstream(int devnum, char *fpgadata, size_t size, |
| bitstream_type bstype) |
| { |
| printf("Bitstream support not implemented for this FPGA device\n"); |
| return FPGA_FAIL; |
| } |
| |
| #if defined(CONFIG_CMD_FPGA_LOADFS) |
| int fpga_fsload(int devnum, const void *buf, size_t size, |
| fpga_fs_info *fpga_fsinfo) |
| { |
| int ret_val = FPGA_FAIL; /* assume failure */ |
| const fpga_desc *desc = fpga_validate(devnum, buf, size, |
| (char *)__func__); |
| |
| if (desc) { |
| switch (desc->devtype) { |
| case fpga_xilinx: |
| #if defined(CONFIG_FPGA_XILINX) |
| ret_val = xilinx_loadfs(desc->devdesc, buf, size, |
| fpga_fsinfo); |
| #else |
| fpga_no_sup((char *)__func__, "Xilinx devices"); |
| #endif |
| break; |
| default: |
| printf("%s: Invalid or unsupported device type %d\n", |
| __func__, desc->devtype); |
| } |
| } |
| |
| return ret_val; |
| } |
| #endif |
| |
| #if CONFIG_IS_ENABLED(FPGA_LOAD_SECURE) |
| int fpga_loads(int devnum, const void *buf, size_t size, |
| struct fpga_secure_info *fpga_sec_info) |
| { |
| int ret_val = FPGA_FAIL; |
| |
| const fpga_desc *desc = fpga_validate(devnum, buf, size, |
| (char *)__func__); |
| |
| if (desc) { |
| switch (desc->devtype) { |
| case fpga_xilinx: |
| #if defined(CONFIG_FPGA_XILINX) |
| ret_val = xilinx_loads(desc->devdesc, buf, size, |
| fpga_sec_info); |
| #else |
| fpga_no_sup((char *)__func__, "Xilinx devices"); |
| #endif |
| break; |
| default: |
| printf("%s: Invalid or unsupported device type %d\n", |
| __func__, desc->devtype); |
| } |
| } |
| |
| return ret_val; |
| } |
| #endif |
| |
| static int fpga_load_event_notify(const void *buf, size_t bsize, int result) |
| { |
| if (CONFIG_IS_ENABLED(EVENT)) { |
| struct event_fpga_load load = { |
| .buf = buf, |
| .bsize = bsize, |
| .result = result |
| }; |
| |
| return event_notify(EVT_FPGA_LOAD, &load, sizeof(load)); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Generic multiplexing code |
| */ |
| int fpga_load(int devnum, const void *buf, size_t bsize, bitstream_type bstype, |
| int flags) |
| { |
| int ret_val = FPGA_FAIL; /* assume failure */ |
| int ret_notify; |
| const fpga_desc *desc = fpga_validate(devnum, buf, bsize, |
| (char *)__func__); |
| |
| if (desc) { |
| switch (desc->devtype) { |
| case fpga_xilinx: |
| #if defined(CONFIG_FPGA_XILINX) |
| ret_val = xilinx_load(desc->devdesc, buf, bsize, |
| bstype, flags); |
| #else |
| fpga_no_sup((char *)__func__, "Xilinx devices"); |
| #endif |
| break; |
| case fpga_altera: |
| #if defined(CONFIG_FPGA_ALTERA) |
| ret_val = altera_load(desc->devdesc, buf, bsize); |
| #else |
| fpga_no_sup((char *)__func__, "Altera devices"); |
| #endif |
| break; |
| case fpga_lattice: |
| #if defined(CONFIG_FPGA_LATTICE) |
| ret_val = lattice_load(desc->devdesc, buf, bsize); |
| #else |
| fpga_no_sup((char *)__func__, "Lattice devices"); |
| #endif |
| break; |
| default: |
| printf("%s: Invalid or unsupported device type %d\n", |
| __func__, desc->devtype); |
| } |
| } |
| |
| ret_notify = fpga_load_event_notify(buf, bsize, ret_val); |
| if (ret_notify) |
| return ret_notify; |
| |
| return ret_val; |
| } |
| |
| /* |
| * fpga_dump |
| * generic multiplexing code |
| */ |
| int fpga_dump(int devnum, const void *buf, size_t bsize) |
| { |
| int ret_val = FPGA_FAIL; /* assume failure */ |
| const fpga_desc *desc = fpga_validate(devnum, buf, bsize, |
| (char *)__func__); |
| |
| if (desc) { |
| switch (desc->devtype) { |
| case fpga_xilinx: |
| #if defined(CONFIG_FPGA_XILINX) |
| ret_val = xilinx_dump(desc->devdesc, buf, bsize); |
| #else |
| fpga_no_sup((char *)__func__, "Xilinx devices"); |
| #endif |
| break; |
| case fpga_altera: |
| #if defined(CONFIG_FPGA_ALTERA) |
| ret_val = altera_dump(desc->devdesc, buf, bsize); |
| #else |
| fpga_no_sup((char *)__func__, "Altera devices"); |
| #endif |
| break; |
| case fpga_lattice: |
| #if defined(CONFIG_FPGA_LATTICE) |
| ret_val = lattice_dump(desc->devdesc, buf, bsize); |
| #else |
| fpga_no_sup((char *)__func__, "Lattice devices"); |
| #endif |
| break; |
| default: |
| printf("%s: Invalid or unsupported device type %d\n", |
| __func__, desc->devtype); |
| } |
| } |
| |
| return ret_val; |
| } |
| |
| /* |
| * fpga_info |
| * front end to fpga_dev_info. If devnum is invalid, report on all |
| * available devices. |
| */ |
| int fpga_info(int devnum) |
| { |
| if (devnum == FPGA_INVALID_DEVICE) { |
| if (next_desc > 0) { |
| int dev; |
| |
| for (dev = 0; dev < next_desc; dev++) |
| fpga_dev_info(dev); |
| |
| return FPGA_SUCCESS; |
| } else { |
| printf("%s: No FPGA devices available.\n", __func__); |
| return FPGA_FAIL; |
| } |
| } |
| |
| return fpga_dev_info(devnum); |
| } |
| |
| #if CONFIG_IS_ENABLED(FPGA_LOAD_SECURE) |
| int fpga_compatible2flag(int devnum, const char *compatible) |
| { |
| const fpga_desc * const desc = fpga_get_desc(devnum); |
| |
| if (!desc) |
| return 0; |
| |
| switch (desc->devtype) { |
| #if defined(CONFIG_FPGA_XILINX) |
| case fpga_xilinx: |
| { |
| xilinx_desc *xdesc = (xilinx_desc *)desc->devdesc; |
| |
| if (xdesc->operations && xdesc->operations->str2flag) |
| return xdesc->operations->str2flag(xdesc, compatible); |
| } |
| #endif |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| #endif |