| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2000, 2001 |
| * Rich Ireland, Enterasys Networks, rireland@enterasys.com. |
| */ |
| |
| /* |
| * FPGA support |
| */ |
| #include <command.h> |
| #include <env.h> |
| #include <fpga.h> |
| #include <fs.h> |
| #include <gzip.h> |
| #include <image.h> |
| #include <log.h> |
| #include <malloc.h> |
| |
| static long do_fpga_get_device(char *arg) |
| { |
| long dev = FPGA_INVALID_DEVICE; |
| char *devstr = env_get("fpga"); |
| |
| if (devstr) |
| /* Should be strtol to handle -1 cases */ |
| dev = simple_strtol(devstr, NULL, 16); |
| |
| if (dev == FPGA_INVALID_DEVICE && arg) |
| dev = simple_strtol(arg, NULL, 16); |
| |
| debug("%s: device = %ld\n", __func__, dev); |
| |
| return dev; |
| } |
| |
| static int do_fpga_check_params(long *dev, long *fpga_data, size_t *data_size, |
| struct cmd_tbl *cmdtp, int argc, |
| char *const argv[]) |
| { |
| size_t local_data_size; |
| long local_fpga_data; |
| |
| debug("%s %d, %d\n", __func__, argc, cmdtp->maxargs); |
| |
| if (argc != cmdtp->maxargs) { |
| debug("fpga: incorrect parameters passed\n"); |
| return CMD_RET_USAGE; |
| } |
| |
| *dev = do_fpga_get_device(argv[0]); |
| |
| local_fpga_data = simple_strtol(argv[1], NULL, 16); |
| if (!local_fpga_data) { |
| debug("fpga: zero fpga_data address\n"); |
| return CMD_RET_USAGE; |
| } |
| *fpga_data = local_fpga_data; |
| |
| local_data_size = hextoul(argv[2], NULL); |
| if (!local_data_size) { |
| debug("fpga: zero size\n"); |
| return CMD_RET_USAGE; |
| } |
| *data_size = local_data_size; |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_CMD_FPGA_LOAD_SECURE) |
| int do_fpga_loads(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) |
| { |
| size_t data_size = 0; |
| long fpga_data, dev; |
| int ret; |
| struct fpga_secure_info fpga_sec_info; |
| |
| memset(&fpga_sec_info, 0, sizeof(fpga_sec_info)); |
| |
| if (argc < 5) { |
| debug("fpga: incorrect parameters passed\n"); |
| return CMD_RET_USAGE; |
| } |
| |
| if (argc == 6) |
| fpga_sec_info.userkey_addr = (u8 *)(uintptr_t) |
| simple_strtoull(argv[5], |
| NULL, 16); |
| else |
| /* |
| * If 6th parameter is not passed then do_fpga_check_params |
| * will get 5 instead of expected 6 which means that function |
| * return CMD_RET_USAGE. Increase number of params +1 to pass |
| * this. |
| */ |
| argc++; |
| |
| fpga_sec_info.encflag = (u8)hextoul(argv[4], NULL); |
| fpga_sec_info.authflag = (u8)hextoul(argv[3], NULL); |
| |
| if (fpga_sec_info.authflag >= FPGA_NO_ENC_OR_NO_AUTH && |
| fpga_sec_info.encflag >= FPGA_NO_ENC_OR_NO_AUTH) { |
| debug("fpga: Use <fpga load> for NonSecure bitstream\n"); |
| return CMD_RET_USAGE; |
| } |
| |
| if (fpga_sec_info.encflag == FPGA_ENC_USR_KEY && |
| !fpga_sec_info.userkey_addr) { |
| debug("fpga: User key not provided\n"); |
| return CMD_RET_USAGE; |
| } |
| |
| ret = do_fpga_check_params(&dev, &fpga_data, &data_size, |
| cmdtp, argc, argv); |
| if (ret) |
| return ret; |
| |
| return fpga_loads(dev, (void *)fpga_data, data_size, &fpga_sec_info); |
| } |
| #endif |
| |
| #if defined(CONFIG_CMD_FPGA_LOADFS) |
| static int do_fpga_loadfs(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| size_t data_size = 0; |
| long fpga_data, dev; |
| int ret; |
| fpga_fs_info fpga_fsinfo; |
| |
| ret = do_fpga_check_params(&dev, &fpga_data, &data_size, |
| cmdtp, argc, argv); |
| if (ret) |
| return ret; |
| |
| fpga_fsinfo.fstype = FS_TYPE_ANY; |
| fpga_fsinfo.blocksize = (unsigned int)hextoul(argv[3], NULL); |
| fpga_fsinfo.interface = argv[4]; |
| fpga_fsinfo.dev_part = argv[5]; |
| fpga_fsinfo.filename = argv[6]; |
| |
| return fpga_fsload(dev, (void *)fpga_data, data_size, &fpga_fsinfo); |
| } |
| #endif |
| |
| static int do_fpga_info(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| long dev = do_fpga_get_device(argv[0]); |
| |
| return fpga_info(dev); |
| } |
| |
| static int do_fpga_dump(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| size_t data_size = 0; |
| long fpga_data, dev; |
| int ret; |
| |
| ret = do_fpga_check_params(&dev, &fpga_data, &data_size, |
| cmdtp, argc, argv); |
| if (ret) |
| return ret; |
| |
| return fpga_dump(dev, (void *)fpga_data, data_size); |
| } |
| |
| static int do_fpga_load(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| size_t data_size = 0; |
| long fpga_data, dev; |
| int ret; |
| |
| ret = do_fpga_check_params(&dev, &fpga_data, &data_size, |
| cmdtp, argc, argv); |
| if (ret) |
| return ret; |
| |
| return fpga_load(dev, (void *)fpga_data, data_size, BIT_FULL, 0); |
| } |
| |
| static int do_fpga_loadb(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| size_t data_size = 0; |
| long fpga_data, dev; |
| int ret; |
| |
| ret = do_fpga_check_params(&dev, &fpga_data, &data_size, |
| cmdtp, argc, argv); |
| if (ret) |
| return ret; |
| |
| return fpga_loadbitstream(dev, (void *)fpga_data, data_size, BIT_FULL); |
| } |
| |
| #if defined(CONFIG_CMD_FPGA_LOADP) |
| static int do_fpga_loadp(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| size_t data_size = 0; |
| long fpga_data, dev; |
| int ret; |
| |
| ret = do_fpga_check_params(&dev, &fpga_data, &data_size, |
| cmdtp, argc, argv); |
| if (ret) |
| return ret; |
| |
| return fpga_load(dev, (void *)fpga_data, data_size, BIT_PARTIAL, 0); |
| } |
| #endif |
| |
| #if defined(CONFIG_CMD_FPGA_LOADBP) |
| static int do_fpga_loadbp(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| size_t data_size = 0; |
| long fpga_data, dev; |
| int ret; |
| |
| ret = do_fpga_check_params(&dev, &fpga_data, &data_size, |
| cmdtp, argc, argv); |
| if (ret) |
| return ret; |
| |
| return fpga_loadbitstream(dev, (void *)fpga_data, data_size, |
| BIT_PARTIAL); |
| } |
| #endif |
| |
| #if defined(CONFIG_CMD_FPGA_LOADMK) |
| static int do_fpga_loadmk(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| size_t data_size = 0; |
| void *fpga_data = NULL; |
| #if defined(CONFIG_FIT) |
| const char *fit_uname = NULL; |
| ulong fit_addr; |
| #endif |
| ulong dev = do_fpga_get_device(argv[0]); |
| char *datastr = env_get("fpgadata"); |
| |
| debug("fpga: argc %x, dev %lx, datastr %s\n", argc, dev, datastr); |
| |
| if (dev == FPGA_INVALID_DEVICE) { |
| debug("fpga: Invalid fpga device\n"); |
| return CMD_RET_USAGE; |
| } |
| |
| if (argc == 0 && !datastr) { |
| debug("fpga: No datastr passed\n"); |
| return CMD_RET_USAGE; |
| } |
| |
| if (argc == 2) { |
| datastr = argv[1]; |
| debug("fpga: Full command with two args\n"); |
| } else if (argc == 1 && !datastr) { |
| debug("fpga: Dev is setup - fpgadata passed\n"); |
| datastr = argv[0]; |
| } |
| |
| #if defined(CONFIG_FIT) |
| if (fit_parse_subimage(datastr, (ulong)fpga_data, |
| &fit_addr, &fit_uname)) { |
| fpga_data = (void *)fit_addr; |
| debug("* fpga: subimage '%s' from FIT image ", |
| fit_uname); |
| debug("at 0x%08lx\n", fit_addr); |
| } else |
| #endif |
| { |
| fpga_data = (void *)hextoul(datastr, NULL); |
| debug("* fpga: cmdline image address = 0x%08lx\n", |
| (ulong)fpga_data); |
| } |
| debug("%s: fpga_data = 0x%lx\n", __func__, (ulong)fpga_data); |
| if (!fpga_data) { |
| puts("Zero fpga_data address\n"); |
| return CMD_RET_USAGE; |
| } |
| |
| switch (genimg_get_format(fpga_data)) { |
| #if defined(CONFIG_LEGACY_IMAGE_FORMAT) |
| case IMAGE_FORMAT_LEGACY: |
| { |
| struct legacy_img_hdr *hdr = (struct legacy_img_hdr *)fpga_data; |
| ulong data; |
| u8 comp; |
| |
| comp = image_get_comp(hdr); |
| if (comp == IH_COMP_GZIP) { |
| #if defined(CONFIG_GZIP) |
| ulong image_buf = image_get_data(hdr); |
| ulong image_size = ~0UL; |
| |
| data = image_get_load(hdr); |
| |
| if (gunzip((void *)data, ~0UL, (void *)image_buf, |
| &image_size) != 0) { |
| puts("GUNZIP: error\n"); |
| return CMD_RET_FAILURE; |
| } |
| data_size = image_size; |
| #else |
| puts("Gunzip image is not supported\n"); |
| return 1; |
| #endif |
| } else { |
| data = (ulong)image_get_data(hdr); |
| data_size = image_get_data_size(hdr); |
| } |
| return fpga_load(dev, (void *)data, data_size, |
| BIT_FULL, 0); |
| } |
| #endif |
| #if defined(CONFIG_FIT) |
| case IMAGE_FORMAT_FIT: |
| { |
| const void *fit_hdr = (const void *)fpga_data; |
| int err; |
| const void *fit_data; |
| |
| if (!fit_uname) { |
| puts("No FIT subimage unit name\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| if (fit_check_format(fit_hdr, IMAGE_SIZE_INVAL)) { |
| puts("Bad FIT image format\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| err = fit_get_data_node(fit_hdr, fit_uname, &fit_data, |
| &data_size); |
| if (err) { |
| printf("Could not load '%s' subimage (err %d)\n", |
| fit_uname, err); |
| return CMD_RET_FAILURE; |
| } |
| |
| return fpga_load(dev, fit_data, data_size, BIT_FULL, 0); |
| } |
| #endif |
| default: |
| puts("** Unknown image type\n"); |
| return CMD_RET_FAILURE; |
| } |
| } |
| #endif |
| |
| static struct cmd_tbl fpga_commands[] = { |
| U_BOOT_CMD_MKENT(info, 1, 1, do_fpga_info, "", ""), |
| U_BOOT_CMD_MKENT(dump, 3, 1, do_fpga_dump, "", ""), |
| U_BOOT_CMD_MKENT(load, 3, 1, do_fpga_load, "", ""), |
| U_BOOT_CMD_MKENT(loadb, 3, 1, do_fpga_loadb, "", ""), |
| #if defined(CONFIG_CMD_FPGA_LOADP) |
| U_BOOT_CMD_MKENT(loadp, 3, 1, do_fpga_loadp, "", ""), |
| #endif |
| #if defined(CONFIG_CMD_FPGA_LOADBP) |
| U_BOOT_CMD_MKENT(loadbp, 3, 1, do_fpga_loadbp, "", ""), |
| #endif |
| #if defined(CONFIG_CMD_FPGA_LOADFS) |
| U_BOOT_CMD_MKENT(loadfs, 7, 1, do_fpga_loadfs, "", ""), |
| #endif |
| #if defined(CONFIG_CMD_FPGA_LOADMK) |
| U_BOOT_CMD_MKENT(loadmk, 2, 1, do_fpga_loadmk, "", ""), |
| #endif |
| #if defined(CONFIG_CMD_FPGA_LOAD_SECURE) |
| U_BOOT_CMD_MKENT(loads, 6, 1, do_fpga_loads, "", ""), |
| #endif |
| }; |
| |
| static int do_fpga_wrapper(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| struct cmd_tbl *fpga_cmd; |
| int ret; |
| |
| if (argc < 2) |
| return CMD_RET_USAGE; |
| |
| fpga_cmd = find_cmd_tbl(argv[1], fpga_commands, |
| ARRAY_SIZE(fpga_commands)); |
| if (!fpga_cmd) { |
| debug("fpga: non existing command\n"); |
| return CMD_RET_USAGE; |
| } |
| |
| argc -= 2; |
| argv += 2; |
| |
| if (argc > fpga_cmd->maxargs) { |
| debug("fpga: more parameters passed\n"); |
| return CMD_RET_USAGE; |
| } |
| |
| ret = fpga_cmd->cmd(fpga_cmd, flag, argc, argv); |
| |
| return cmd_process_error(fpga_cmd, ret); |
| } |
| |
| #if defined(CONFIG_CMD_FPGA_LOADFS) || defined(CONFIG_CMD_FPGA_LOAD_SECURE) |
| U_BOOT_CMD(fpga, 9, 1, do_fpga_wrapper, |
| #else |
| U_BOOT_CMD(fpga, 6, 1, do_fpga_wrapper, |
| #endif |
| "loadable FPGA image support", |
| "[operation type] [device number] [image address] [image size]\n" |
| "fpga operations:\n" |
| " dump\t[dev] [address] [size]\tLoad device to memory buffer\n" |
| " info\t[dev]\t\t\tlist known device information\n" |
| " load\t[dev] [address] [size]\tLoad device from memory buffer\n" |
| #if defined(CONFIG_CMD_FPGA_LOADP) |
| " loadp\t[dev] [address] [size]\t" |
| "Load device from memory buffer with partial bitstream\n" |
| #endif |
| " loadb\t[dev] [address] [size]\t" |
| "Load device from bitstream buffer (Xilinx only)\n" |
| #if defined(CONFIG_CMD_FPGA_LOADBP) |
| " loadbp\t[dev] [address] [size]\t" |
| "Load device from bitstream buffer with partial bitstream" |
| "(Xilinx only)\n" |
| #endif |
| #if defined(CONFIG_CMD_FPGA_LOADFS) |
| "Load device from filesystem (FAT by default) (Xilinx only)\n" |
| " loadfs [dev] [address] [image size] [blocksize] <interface>\n" |
| " [<dev[:part]>] <filename>\n" |
| #endif |
| #if defined(CONFIG_CMD_FPGA_LOADMK) |
| " loadmk [dev] [address]\tLoad device generated with mkimage" |
| #if defined(CONFIG_FIT) |
| "\n" |
| "\tFor loadmk operating on FIT format uImage address must include\n" |
| "\tsubimage unit name in the form of addr:<subimg_uname>" |
| #endif |
| #endif |
| #if defined(CONFIG_CMD_FPGA_LOAD_SECURE) |
| "Load encrypted bitstream (Xilinx only)\n" |
| " loads [dev] [address] [size] [auth-OCM-0/DDR-1/noauth-2]\n" |
| " [enc-devkey(0)/userkey(1)/nenc(2) [Userkey address]\n" |
| "Loads the secure bistreams(authenticated/encrypted/both\n" |
| "authenticated and encrypted) of [size] from [address].\n" |
| "The auth-OCM/DDR flag specifies to perform authentication\n" |
| "in OCM or in DDR. 0 for OCM, 1 for DDR, 2 for no authentication.\n" |
| "The enc flag specifies which key to be used for decryption\n" |
| "0-device key, 1-user key, 2-no encryption.\n" |
| "The optional Userkey address specifies from which address key\n" |
| "has to be used for decryption if user key is selected.\n" |
| "NOTE: the secure bitstream has to be created using Xilinx\n" |
| "bootgen tool only.\n" |
| #endif |
| ); |