diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 8896b70..a0de4be 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -14,6 +14,41 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 #if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+/*
+ * This erratum requires setting a value to eddrtqcr1 to
+ * optimal the DDR performance.
+ */
+static void erratum_a008336(void)
+{
+	u32 *eddrtqcr1;
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008336
+#ifdef CONFIG_SYS_FSL_DCSR_DDR_ADDR
+	eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR_ADDR + 0x800;
+	out_le32(eddrtqcr1, 0x63b30002);
+#endif
+#ifdef CONFIG_SYS_FSL_DCSR_DDR2_ADDR
+	eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR2_ADDR + 0x800;
+	out_le32(eddrtqcr1, 0x63b30002);
+#endif
+#endif
+}
+
+/*
+ * This erratum requires a register write before being Memory
+ * controller 3 being enabled.
+ */
+static void erratum_a008514(void)
+{
+	u32 *eddrtqcr1;
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008514
+#ifdef CONFIG_SYS_FSL_DCSR_DDR3_ADDR
+	eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR3_ADDR + 0x800;
+	out_le32(eddrtqcr1, 0x63b20002);
+#endif
+#endif
+}
 #ifdef CONFIG_SYS_FSL_ERRATUM_A009635
 #define PLATFORM_CYCLE_ENV_VAR	"a009635_interval_val"
 
@@ -118,6 +153,8 @@
 	erratum_rcw_src();
 	init_early_memctl_regs();	/* tighten IFC timing */
 	erratum_a009203();
+	erratum_a008514();
+	erratum_a008336();
 }
 
 #elif defined(CONFIG_LS1043A)
diff --git a/drivers/ddr/fsl/fsl_ddr_gen4.c b/drivers/ddr/fsl/fsl_ddr_gen4.c
index 0755ff7..3fca5c2 100644
--- a/drivers/ddr/fsl/fsl_ddr_gen4.c
+++ b/drivers/ddr/fsl/fsl_ddr_gen4.c
@@ -49,10 +49,6 @@
 	u32 temp_sdram_cfg;
 	u32 total_gb_size_per_controller;
 	int timeout;
-#if defined(CONFIG_SYS_FSL_ERRATUM_A008336) || \
-	defined(CONFIG_SYS_FSL_ERRATUM_A008514)
-	u32 *eddrtqcr1;
-#endif
 #ifdef CONFIG_SYS_FSL_ERRATUM_A008511
 	u32 temp32, mr6;
 	u32 vref_seq1[3] = {0x80, 0x96, 0x16};	/* for range 1 */
@@ -70,36 +66,20 @@
 	switch (ctrl_num) {
 	case 0:
 		ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
-#if defined(CONFIG_SYS_FSL_ERRATUM_A008336) || \
-	defined(CONFIG_SYS_FSL_ERRATUM_A008514)
-		eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR_ADDR + 0x800;
-#endif
 		break;
 #if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
 	case 1:
 		ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
-#if defined(CONFIG_SYS_FSL_ERRATUM_A008336) || \
-	defined(CONFIG_SYS_FSL_ERRATUM_A008514)
-		eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR2_ADDR + 0x800;
-#endif
 		break;
 #endif
 #if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
 	case 2:
 		ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
-#if defined(CONFIG_SYS_FSL_ERRATUM_A008336) || \
-	defined(CONFIG_SYS_FSL_ERRATUM_A008514)
-		eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR3_ADDR + 0x800;
-#endif
 		break;
 #endif
 #if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
 	case 3:
 		ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
-#if defined(CONFIG_SYS_FSL_ERRATUM_A008336) || \
-	defined(CONFIG_SYS_FSL_ERRATUM_A008514)
-		eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR4_ADDR + 0x800;
-#endif
 		break;
 #endif
 	default:
@@ -110,20 +90,6 @@
 	if (step == 2)
 		goto step2;
 
-#ifdef CONFIG_SYS_FSL_ERRATUM_A008336
-#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
-	/* A008336 only applies to general DDR controllers */
-	if ((ctrl_num == 0) || (ctrl_num == 1))
-#endif
-		ddr_out32(eddrtqcr1, 0x63b30002);
-#endif
-#ifdef CONFIG_SYS_FSL_ERRATUM_A008514
-#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
-	/* A008514 only applies to DP-DDR controler */
-	if (ctrl_num == 2)
-#endif
-		ddr_out32(eddrtqcr1, 0x63b20002);
-#endif
 	if (regs->ddr_eor)
 		ddr_out32(&ddr->eor, regs->ddr_eor);