dm: spi: soft_spi bug fix

When doing xfer, should use device->parent, but not device
When doing bit xfer, should use "!!(tmpdout & 0x80)", but not
"(tmpdout & 0x80)"

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Jagan Teki <jteki@openedev.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/drivers/spi/soft_spi.c b/drivers/spi/soft_spi.c
index aa4abcc..8cdb520 100644
--- a/drivers/spi/soft_spi.c
+++ b/drivers/spi/soft_spi.c
@@ -34,7 +34,8 @@
 
 static int soft_spi_scl(struct udevice *dev, int bit)
 {
-	struct soft_spi_platdata *plat = dev->platdata;
+	struct udevice *bus = dev_get_parent(dev);
+	struct soft_spi_platdata *plat = dev_get_platdata(bus);
 
 	dm_gpio_set_value(&plat->sclk, bit);
 
@@ -43,7 +44,8 @@
 
 static int soft_spi_sda(struct udevice *dev, int bit)
 {
-	struct soft_spi_platdata *plat = dev->platdata;
+	struct udevice *bus = dev_get_parent(dev);
+	struct soft_spi_platdata *plat = dev_get_platdata(bus);
 
 	dm_gpio_set_value(&plat->mosi, bit);
 
@@ -52,7 +54,8 @@
 
 static int soft_spi_cs_activate(struct udevice *dev)
 {
-	struct soft_spi_platdata *plat = dev->platdata;
+	struct udevice *bus = dev_get_parent(dev);
+	struct soft_spi_platdata *plat = dev_get_platdata(bus);
 
 	dm_gpio_set_value(&plat->cs, 0);
 	dm_gpio_set_value(&plat->sclk, 0);
@@ -63,7 +66,8 @@
 
 static int soft_spi_cs_deactivate(struct udevice *dev)
 {
-	struct soft_spi_platdata *plat = dev->platdata;
+	struct udevice *bus = dev_get_parent(dev);
+	struct soft_spi_platdata *plat = dev_get_platdata(bus);
 
 	dm_gpio_set_value(&plat->cs, 0);
 
@@ -100,8 +104,9 @@
 static int soft_spi_xfer(struct udevice *dev, unsigned int bitlen,
 			 const void *dout, void *din, unsigned long flags)
 {
-	struct soft_spi_priv *priv = dev_get_priv(dev);
-	struct soft_spi_platdata *plat = dev->platdata;
+	struct udevice *bus = dev_get_parent(dev);
+	struct soft_spi_priv *priv = dev_get_priv(bus);
+	struct soft_spi_platdata *plat = dev_get_platdata(bus);
 	uchar		tmpdin  = 0;
 	uchar		tmpdout = 0;
 	const u8	*txd = dout;
@@ -134,7 +139,7 @@
 
 		if (!cpha)
 			soft_spi_scl(dev, 0);
-		soft_spi_sda(dev, tmpdout & 0x80);
+		soft_spi_sda(dev, !!(tmpdout & 0x80));
 		udelay(plat->spi_delay_us);
 		if (cpha)
 			soft_spi_scl(dev, 0);