dm: spl: Allow device tree/driver model in board_init_f()
Add an spl_init() function that does basic init such that board_init_f() can
use simple malloc(), device tree and driver model. Each one is set up only
if enabled for SPL.
Note: We really should refactor SPL such that there is a single
board_init_f() and rename the existing weak board_init_f() functions
provided by boards, calling them from the single board_init_f().
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/common/spl/spl.c b/common/spl/spl.c
index aeb0645..074c41d 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -148,18 +148,12 @@
}
#endif
-void board_init_r(gd_t *dummy1, ulong dummy2)
+int spl_init(void)
{
- u32 boot_device;
int ret;
- debug(">>spl:board_init_r()\n");
-
-#if defined(CONFIG_SYS_SPL_MALLOC_START)
- mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START,
- CONFIG_SYS_SPL_MALLOC_SIZE);
- gd->flags |= GD_FLG_FULL_MALLOC_INIT;
-#elif defined(CONFIG_SYS_MALLOC_F_LEN)
+ debug("spl_init()\n");
+#if defined(CONFIG_SYS_MALLOC_F_LEN)
gd->malloc_limit = CONFIG_SYS_MALLOC_F_LEN;
gd->malloc_ptr = 0;
#endif
@@ -168,17 +162,36 @@
ret = fdtdec_setup();
if (ret) {
debug("fdtdec_setup() returned error %d\n", ret);
- hang();
+ return ret;
}
}
if (IS_ENABLED(CONFIG_SPL_DM)) {
ret = dm_init_and_scan(true);
if (ret) {
debug("dm_init_and_scan() returned error %d\n", ret);
- hang();
+ return ret;
}
}
+ gd->flags |= GD_FLG_SPL_INIT;
+
+ return 0;
+}
+
+void board_init_r(gd_t *dummy1, ulong dummy2)
+{
+ u32 boot_device;
+ debug(">>spl:board_init_r()\n");
+
+#if defined(CONFIG_SYS_SPL_MALLOC_START)
+ mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START,
+ CONFIG_SYS_SPL_MALLOC_SIZE);
+ gd->flags |= GD_FLG_FULL_MALLOC_INIT;
+#endif
+ if (!(gd->flags & GD_FLG_SPL_INIT)) {
+ if (spl_init())
+ hang();
+ }
#ifndef CONFIG_PPC
/*
* timer_init() does not exist on PPC systems. The timer is initialized
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h
index db0550b..7ef3e25 100644
--- a/include/asm-generic/global_data.h
+++ b/include/asm-generic/global_data.h
@@ -116,5 +116,6 @@
#define GD_FLG_ENV_READY 0x00080 /* Env. imported into hash table */
#define GD_FLG_SERIAL_READY 0x00100 /* Pre-reloc serial console ready */
#define GD_FLG_FULL_MALLOC_INIT 0x00200 /* Full malloc() is ready */
+#define GD_FLG_SPL_INIT 0x00400 /* spl_init() has been called */
#endif /* __ASM_GENERIC_GBL_DATA_H */
diff --git a/include/spl.h b/include/spl.h
index d19940f..8e53426 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -81,6 +81,18 @@
int spl_load_image_ext(block_dev_desc_t *block_dev, int partition, const char *filename);
int spl_load_image_ext_os(block_dev_desc_t *block_dev, int partition);
+/**
+ * spl_init() - Set up device tree and driver model in SPL if enabled
+ *
+ * Call this function in board_init_f() if you want to use device tree and
+ * driver model early, before board_init_r() is called. This function will
+ * be called from board_init_r() if not called earlier.
+ *
+ * If this is not called, then driver model will be inactive in SPL's
+ * board_init_f(), and no device tree will be available.
+ */
+int spl_init(void);
+
#ifdef CONFIG_SPL_BOARD_INIT
void spl_board_init(void);
#endif