| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2020 |
| * Arthur Li, Cortina Access, arthur.li@cortina-access.com. |
| */ |
| |
| #include <common.h> |
| #include <i2c.h> |
| #include <log.h> |
| #include <asm/io.h> |
| #include <dm.h> |
| #include <mapmem.h> |
| #include "i2c-cortina.h" |
| |
| static void set_speed(struct i2c_regs *regs, int i2c_spd) |
| { |
| union ca_biw_cfg i2c_cfg; |
| |
| i2c_cfg.wrd = readl(®s->i2c_cfg); |
| i2c_cfg.bf.core_en = 0; |
| writel(i2c_cfg.wrd, ®s->i2c_cfg); |
| |
| switch (i2c_spd) { |
| case IC_SPEED_MODE_FAST_PLUS: |
| i2c_cfg.bf.prer = CORTINA_PER_IO_FREQ / |
| (5 * I2C_SPEED_FAST_PLUS_RATE) - 1; |
| break; |
| |
| case IC_SPEED_MODE_STANDARD: |
| i2c_cfg.bf.prer = CORTINA_PER_IO_FREQ / |
| (5 * I2C_SPEED_STANDARD_RATE) - 1; |
| break; |
| |
| case IC_SPEED_MODE_FAST: |
| default: |
| i2c_cfg.bf.prer = CORTINA_PER_IO_FREQ / |
| (5 * I2C_SPEED_FAST_RATE) - 1; |
| break; |
| } |
| |
| i2c_cfg.bf.core_en = 1; |
| writel(i2c_cfg.wrd, ®s->i2c_cfg); |
| } |
| |
| static int ca_i2c_set_bus_speed(struct udevice *bus, unsigned int speed) |
| { |
| struct ca_i2c *priv = dev_get_priv(bus); |
| int i2c_spd; |
| |
| if (speed >= I2C_SPEED_FAST_PLUS_RATE) { |
| i2c_spd = IC_SPEED_MODE_FAST_PLUS; |
| priv->speed = I2C_SPEED_FAST_PLUS_RATE; |
| } else if (speed >= I2C_SPEED_FAST_RATE) { |
| i2c_spd = IC_SPEED_MODE_FAST; |
| priv->speed = I2C_SPEED_FAST_RATE; |
| } else { |
| i2c_spd = IC_SPEED_MODE_STANDARD; |
| priv->speed = I2C_SPEED_STANDARD_RATE; |
| } |
| |
| set_speed(priv->regs, i2c_spd); |
| |
| return 0; |
| } |
| |
| static int ca_i2c_get_bus_speed(struct udevice *bus) |
| { |
| struct ca_i2c *priv = dev_get_priv(bus); |
| |
| return priv->speed; |
| } |
| |
| static void ca_i2c_init(struct i2c_regs *regs) |
| { |
| union ca_biw_cfg i2c_cfg; |
| |
| i2c_cfg.wrd = readl(®s->i2c_cfg); |
| i2c_cfg.bf.core_en = 0; |
| i2c_cfg.bf.biw_soft_reset = 1; |
| writel(i2c_cfg.wrd, ®s->i2c_cfg); |
| mdelay(10); |
| i2c_cfg.bf.biw_soft_reset = 0; |
| writel(i2c_cfg.wrd, ®s->i2c_cfg); |
| |
| set_speed(regs, IC_SPEED_MODE_STANDARD); |
| |
| i2c_cfg.wrd = readl(®s->i2c_cfg); |
| i2c_cfg.bf.core_en = 1; |
| writel(i2c_cfg.wrd, ®s->i2c_cfg); |
| } |
| |
| static int i2c_wait_complete(struct i2c_regs *regs) |
| { |
| union ca_biw_ctrl i2c_ctrl; |
| unsigned long start_time_bb = get_timer(0); |
| |
| i2c_ctrl.wrd = readl(®s->i2c_ctrl); |
| |
| while (i2c_ctrl.bf.biwdone == 0) { |
| i2c_ctrl.wrd = readl(®s->i2c_ctrl); |
| |
| if (get_timer(start_time_bb) > |
| (unsigned long)(I2C_BYTE_TO_BB)) { |
| printf("%s not done!!!\n", __func__); |
| return -ETIMEDOUT; |
| } |
| } |
| |
| /* Clear done bit */ |
| writel(i2c_ctrl.wrd, ®s->i2c_ctrl); |
| |
| return 0; |
| } |
| |
| static void i2c_setaddress(struct i2c_regs *regs, unsigned int i2c_addr, |
| int write_read) |
| { |
| writel(i2c_addr | write_read, ®s->i2c_txr); |
| |
| writel(BIW_CTRL_START | BIW_CTRL_WRITE, |
| ®s->i2c_ctrl); |
| |
| i2c_wait_complete(regs); |
| } |
| |
| static int i2c_wait_for_bus_busy(struct i2c_regs *regs) |
| { |
| union ca_biw_ack i2c_ack; |
| unsigned long start_time_bb = get_timer(0); |
| |
| i2c_ack.wrd = readl(®s->i2c_ack); |
| |
| while (i2c_ack.bf.biw_busy) { |
| i2c_ack.wrd = readl(®s->i2c_ack); |
| |
| if (get_timer(start_time_bb) > |
| (unsigned long)(I2C_BYTE_TO_BB)) { |
| printf("%s: timeout!\n", __func__); |
| return -ETIMEDOUT; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int i2c_xfer_init(struct i2c_regs *regs, uint8_t chip, uint addr, |
| int alen, int write_read) |
| { |
| int addr_len = alen; |
| |
| if (i2c_wait_for_bus_busy(regs)) |
| return 1; |
| |
| /* First cycle must write addr + offset */ |
| chip = ((chip & 0x7F) << 1); |
| if (alen == 0 && write_read == I2C_CMD_RD) |
| i2c_setaddress(regs, chip, I2C_CMD_RD); |
| else |
| i2c_setaddress(regs, chip, I2C_CMD_WT); |
| |
| while (alen) { |
| alen--; |
| writel(addr, ®s->i2c_txr); |
| if (write_read == I2C_CMD_RD) |
| writel(BIW_CTRL_WRITE | BIW_CTRL_STOP, |
| ®s->i2c_ctrl); |
| else |
| writel(BIW_CTRL_WRITE, ®s->i2c_ctrl); |
| i2c_wait_complete(regs); |
| } |
| |
| /* Send address again with Read flag if it's read command */ |
| if (write_read == I2C_CMD_RD && addr_len > 0) |
| i2c_setaddress(regs, chip, I2C_CMD_RD); |
| |
| return 0; |
| } |
| |
| static int i2c_xfer_finish(struct i2c_regs *regs) |
| { |
| /* Dummy read makes bus free */ |
| writel(BIW_CTRL_READ | BIW_CTRL_STOP, ®s->i2c_ctrl); |
| i2c_wait_complete(regs); |
| |
| if (i2c_wait_for_bus_busy(regs)) { |
| printf("Timed out waiting for bus\n"); |
| return -ETIMEDOUT; |
| } |
| |
| return 0; |
| } |
| |
| static int ca_i2c_read(struct i2c_regs *regs, uint8_t chip, uint addr, |
| int alen, uint8_t *buffer, int len) |
| { |
| unsigned long start_time_rx; |
| int rc = 0; |
| |
| rc = i2c_xfer_init(regs, chip, addr, alen, I2C_CMD_RD); |
| if (rc) |
| return rc; |
| |
| start_time_rx = get_timer(0); |
| while (len) { |
| /* ACK_IN is ack value to send during read. |
| * ack high only on the very last byte! |
| */ |
| if (len == 1) |
| writel(BIW_CTRL_READ | BIW_CTRL_ACK_IN | BIW_CTRL_STOP, |
| ®s->i2c_ctrl); |
| else |
| writel(BIW_CTRL_READ, ®s->i2c_ctrl); |
| |
| rc = i2c_wait_complete(regs); |
| udelay(1); |
| |
| if (rc == 0) { |
| *buffer++ = |
| (uchar) readl(®s->i2c_rxr); |
| len--; |
| start_time_rx = get_timer(0); |
| |
| } else if (get_timer(start_time_rx) > I2C_BYTE_TO) { |
| return -ETIMEDOUT; |
| } |
| } |
| i2c_xfer_finish(regs); |
| return rc; |
| } |
| |
| static int ca_i2c_write(struct i2c_regs *regs, uint8_t chip, uint addr, |
| int alen, uint8_t *buffer, int len) |
| { |
| int rc, nb = len; |
| unsigned long start_time_tx; |
| |
| rc = i2c_xfer_init(regs, chip, addr, alen, I2C_CMD_WT); |
| if (rc) |
| return rc; |
| |
| start_time_tx = get_timer(0); |
| while (len) { |
| writel(*buffer, ®s->i2c_txr); |
| if (len == 1) |
| writel(BIW_CTRL_WRITE | BIW_CTRL_STOP, |
| ®s->i2c_ctrl); |
| else |
| writel(BIW_CTRL_WRITE, ®s->i2c_ctrl); |
| |
| rc = i2c_wait_complete(regs); |
| |
| if (rc == 0) { |
| len--; |
| buffer++; |
| start_time_tx = get_timer(0); |
| } else if (get_timer(start_time_tx) > (nb * I2C_BYTE_TO)) { |
| return -ETIMEDOUT; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int ca_i2c_probe_chip(struct udevice *bus, uint chip_addr, |
| uint chip_flags) |
| { |
| struct ca_i2c *priv = dev_get_priv(bus); |
| int ret; |
| u32 tmp; |
| |
| /* Try to read the first location of the chip */ |
| ret = ca_i2c_read(priv->regs, chip_addr, 0, 1, (uchar *)&tmp, 1); |
| if (ret) |
| ca_i2c_init(priv->regs); |
| |
| return ret; |
| } |
| |
| static int ca_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs) |
| { |
| struct ca_i2c *priv = dev_get_priv(bus); |
| int ret; |
| |
| debug("i2c_xfer: %d messages\n", nmsgs); |
| for (; nmsgs > 0; nmsgs--, msg++) { |
| debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len); |
| if (msg->flags & I2C_M_RD) |
| ret = ca_i2c_read(priv->regs, msg->addr, 0, 0, |
| msg->buf, msg->len); |
| else |
| ret = ca_i2c_write(priv->regs, msg->addr, 0, 0, |
| msg->buf, msg->len); |
| |
| if (ret) { |
| printf("i2c_xfer: %s error\n", |
| msg->flags & I2C_M_RD ? "read" : "write"); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static const struct dm_i2c_ops ca_i2c_ops = { |
| .xfer = ca_i2c_xfer, |
| .probe_chip = ca_i2c_probe_chip, |
| .set_bus_speed = ca_i2c_set_bus_speed, |
| .get_bus_speed = ca_i2c_get_bus_speed, |
| }; |
| |
| static const struct udevice_id ca_i2c_ids[] = { |
| { .compatible = "cortina,ca-i2c", }, |
| { } |
| }; |
| |
| static int ca_i2c_probe(struct udevice *bus) |
| { |
| struct ca_i2c *priv = dev_get_priv(bus); |
| |
| ca_i2c_init(priv->regs); |
| |
| return 0; |
| } |
| |
| static int ca_i2c_ofdata_to_platdata(struct udevice *bus) |
| { |
| struct ca_i2c *priv = dev_get_priv(bus); |
| |
| priv->regs = map_sysmem(dev_read_addr(bus), sizeof(struct i2c_regs)); |
| if (!priv->regs) { |
| printf("I2C: base address is invalid\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| U_BOOT_DRIVER(i2c_cortina) = { |
| .name = "i2c_cortina", |
| .id = UCLASS_I2C, |
| .of_match = ca_i2c_ids, |
| .ofdata_to_platdata = ca_i2c_ofdata_to_platdata, |
| .probe = ca_i2c_probe, |
| .priv_auto = sizeof(struct ca_i2c), |
| .ops = &ca_i2c_ops, |
| .flags = DM_FLAG_PRE_RELOC, |
| }; |