keystone: init: enable UART1 to be able use it from kernel
Currently PWREMU_MGMT is not configured in the Linux generic UART
driver as this register seems to be specific TI UART IP. So this
needs to be enabled in u-boot to use UART1 from kernel space.
Acked-By: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
diff --git a/arch/arm/cpu/armv7/keystone/init.c b/arch/arm/cpu/armv7/keystone/init.c
index 044015a..4df5ae1 100644
--- a/arch/arm/cpu/armv7/keystone/init.c
+++ b/arch/arm/cpu/armv7/keystone/init.c
@@ -8,6 +8,7 @@
*/
#include <common.h>
+#include <ns16550.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/hardware.h>
@@ -30,6 +31,14 @@
share_all_segments(11); /* PCIE */
#endif
+ /*
+ * just initialise the COM2 port so that TI specific
+ * UART register PWREMU_MGMT is initialized. Linux UART
+ * driver doesn't handle this.
+ */
+ NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM2),
+ CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
+
return 0;
}
diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
index 50ff13a..7ac2662 100644
--- a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
+++ b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
@@ -115,8 +115,6 @@
#define K2HK_LPSC_ARM_SREFLEX 51
#define K2HK_LPSC_TETRIS 52
-#define K2HK_UART0_BASE 0x02530c00
-
/* DDR3A definitions */
#define K2HK_DDR3A_EMIF_CTRL_BASE 0x21010000
#define K2HK_DDR3A_EMIF_DATA_BASE 0x80000000
diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h
index a305a0c..6c532ca 100644
--- a/arch/arm/include/asm/arch-keystone/hardware.h
+++ b/arch/arm/include/asm/arch-keystone/hardware.h
@@ -142,6 +142,9 @@
#define KS2_DDR3_PMCTL_OFFSET 0x38
#define KS2_DDR3_ZQCFG_OFFSET 0xC8
+#define KS2_UART0_BASE 0x02530c00
+#define KS2_UART1_BASE 0x02531000
+
#ifdef CONFIG_SOC_K2HK
#include <asm/arch/hardware-k2hk.h>
#endif