diff --git a/arch/arm/mach-meson/board-gx.c b/arch/arm/mach-meson/board-gx.c
new file mode 100644
index 0000000..f1397f8
--- /dev/null
+++ b/arch/arm/mach-meson/board-gx.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
+ * (C) Copyright 2018 Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <common.h>
+#include <asm/arch/eth.h>
+#include <asm/arch/gx.h>
+#include <asm/arch/mem.h>
+#include <asm/io.h>
+#include <asm/armv8/mmu.h>
+#include <linux/sizes.h>
+#include <phy.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Configure the reserved memory zones exported by the secure registers
+ * into EFI and DTB reserved memory entries.
+ */
+void meson_init_reserved_memory(void *fdt)
+{
+	u64 bl31_size, bl31_start;
+	u64 bl32_size, bl32_start;
+	u32 reg;
+
+	/*
+	 * Get ARM Trusted Firmware reserved memory zones in :
+	 * - AO_SEC_GP_CFG3: bl32 & bl31 size in KiB, can be 0
+	 * - AO_SEC_GP_CFG5: bl31 physical start address, can be NULL
+	 * - AO_SEC_GP_CFG4: bl32 physical start address, can be NULL
+	 */
+	reg = readl(GX_AO_SEC_GP_CFG3);
+
+	bl31_size = ((reg & GX_AO_BL31_RSVMEM_SIZE_MASK)
+			>> GX_AO_BL31_RSVMEM_SIZE_SHIFT) * SZ_1K;
+	bl32_size = (reg & GX_AO_BL32_RSVMEM_SIZE_MASK) * SZ_1K;
+
+	bl31_start = readl(GX_AO_SEC_GP_CFG5);
+	bl32_start = readl(GX_AO_SEC_GP_CFG4);
+
+	/*
+	 * Early Meson GX Firmware revisions did not provide the reserved
+	 * memory zones in the registers, keep fixed memory zone handling.
+	 */
+	if (IS_ENABLED(CONFIG_MESON_GX) &&
+	    !reg && !bl31_start && !bl32_start) {
+		bl31_start = 0x10000000;
+		bl31_size = 0x200000;
+	}
+
+	/* Add first 16MiB reserved zone */
+	meson_board_add_reserved_memory(fdt, 0, GX_FIRMWARE_MEM_SIZE);
+
+	/* Add BL31 reserved zone */
+	if (bl31_start && bl31_size)
+		meson_board_add_reserved_memory(fdt, bl31_start, bl31_size);
+
+	/* Add BL32 reserved zone */
+	if (bl32_start && bl32_size)
+		meson_board_add_reserved_memory(fdt, bl32_start, bl32_size);
+}
+
+phys_size_t get_effective_memsize(void)
+{
+	/* Size is reported in MiB, convert it in bytes */
+	return ((readl(GX_AO_SEC_GP_CFG0) & GX_AO_MEM_SIZE_MASK)
+			>> GX_AO_MEM_SIZE_SHIFT) * SZ_1M;
+}
+
+static struct mm_region gx_mem_map[] = {
+	{
+		.virt = 0x0UL,
+		.phys = 0x0UL,
+		.size = 0xc0000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0xc0000000UL,
+		.phys = 0xc0000000UL,
+		.size = 0x30000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = gx_mem_map;
+
+/* Configure the Ethernet MAC with the requested interface mode
+ * with some optional flags.
+ */
+void meson_eth_init(phy_interface_t mode, unsigned int flags)
+{
+	switch (mode) {
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+		/* Set RGMII mode */
+		setbits_le32(GX_ETH_REG_0, GX_ETH_REG_0_PHY_INTF |
+			     GX_ETH_REG_0_TX_PHASE(1) |
+			     GX_ETH_REG_0_TX_RATIO(4) |
+			     GX_ETH_REG_0_PHY_CLK_EN |
+			     GX_ETH_REG_0_CLK_EN);
+		break;
+
+	case PHY_INTERFACE_MODE_RMII:
+		/* Set RMII mode */
+		out_le32(GX_ETH_REG_0, GX_ETH_REG_0_INVERT_RMII_CLK |
+					 GX_ETH_REG_0_CLK_EN);
+
+		/* Use GXL RMII Internal PHY */
+		if (IS_ENABLED(CONFIG_MESON_GXL) &&
+		    (flags & MESON_USE_INTERNAL_RMII_PHY)) {
+			writel(0x10110181, GX_ETH_REG_2);
+			writel(0xe40908ff, GX_ETH_REG_3);
+		}
+
+		break;
+
+	default:
+		printf("Invalid Ethernet interface mode\n");
+		return;
+	}
+
+	/* Enable power gate */
+	clrbits_le32(GX_MEM_PD_REG_0, GX_MEM_PD_REG_0_ETH_MASK);
+}