mmc: omap: config VMMC, MMC1_PBIAS
Config VMMC voltage to 3V for MMC/SD card slot
and PBIAS settings needed for OMAP4
Fixes MMC/SD detection on boot from eMMC.
Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
diff --git a/arch/arm/include/asm/arch-omap4/omap4.h b/arch/arm/include/asm/arch-omap4/omap4.h
index a6e1e42..fc9c555 100644
--- a/arch/arm/include/asm/arch-omap4/omap4.h
+++ b/arch/arm/include/asm/arch-omap4/omap4.h
@@ -125,6 +125,10 @@
/* CONTROL_EFUSE_2 */
#define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1 0x00ffc000
+#define MMC1_PWRDNZ (1 << 26)
+#define MMC1_PBIASLITE_PWRDNZ (1 << 22)
+#define MMC1_PBIASLITE_VMODE (1 << 21)
+
#ifndef __ASSEMBLY__
struct s32ktimer {
@@ -141,7 +145,9 @@
unsigned int control_ldosram_iva_voltage_ctrl; /* 0x4A002320 */
unsigned int control_ldosram_mpu_voltage_ctrl; /* 0x4A002324 */
unsigned int control_ldosram_core_voltage_ctrl; /* 0x4A002328 */
- unsigned int pad3[260341];
+ unsigned int pad3[260277];
+ unsigned int control_pbiaslite; /* 0x4A100600 */
+ unsigned int pad4[63];
unsigned int control_efuse_1; /* 0x4A100700 */
unsigned int control_efuse_2; /* 0x4A100704 */
};
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index 6627905..5d4cf51 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -28,6 +28,7 @@
#include <part.h>
#include <i2c.h>
#include <twl4030.h>
+#include <twl6030.h>
#include <asm/io.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sys_proto.h>
@@ -38,7 +39,27 @@
static int mmc_read_data(hsmmc_t *mmc_base, char *buf, unsigned int size);
static int mmc_write_data(hsmmc_t *mmc_base, const char *buf, unsigned int siz);
static struct mmc hsmmc_dev[2];
-unsigned char mmc_board_init(hsmmc_t *mmc_base)
+
+#if defined(CONFIG_OMAP44XX) && defined(CONFIG_TWL6030_POWER)
+static void omap4_vmmc_pbias_config(struct mmc *mmc)
+{
+ u32 value = 0;
+ struct omap4_sys_ctrl_regs *const ctrl =
+ (struct omap4_sys_ctrl_regs *)SYSCTRL_GENERAL_CORE_BASE;
+
+
+ value = readl(&ctrl->control_pbiaslite);
+ value &= ~(MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ);
+ writel(value, &ctrl->control_pbiaslite);
+ /* set VMMC to 3V */
+ twl6030_power_mmc_init();
+ value = readl(&ctrl->control_pbiaslite);
+ value |= MMC1_PBIASLITE_VMODE | MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ;
+ writel(value, &ctrl->control_pbiaslite);
+}
+#endif
+
+unsigned char mmc_board_init(struct mmc *mmc)
{
#if defined(CONFIG_TWL4030_POWER)
twl4030_power_mmc_init();
@@ -67,7 +88,11 @@
&prcm_base->iclken1_core);
#endif
-/* TODO add appropriate OMAP4 init - none currently necessary */
+#if defined(CONFIG_OMAP44XX) && defined(CONFIG_TWL6030_POWER)
+ /* PBIAS config needed for MMC1 only */
+ if (mmc->block_dev.dev == 0)
+ omap4_vmmc_pbias_config(mmc);
+#endif
return 0;
}
@@ -108,7 +133,7 @@
unsigned int dsor;
ulong start;
- mmc_board_init(mmc_base);
+ mmc_board_init(mmc);
writel(readl(&mmc_base->sysconfig) | MMC_SOFTRESET,
&mmc_base->sysconfig);
diff --git a/drivers/power/twl6030.c b/drivers/power/twl6030.c
index fef57b4..c5a0038 100644
--- a/drivers/power/twl6030.c
+++ b/drivers/power/twl6030.c
@@ -182,6 +182,13 @@
return;
}
+void twl6030_power_mmc_init()
+{
+ /* set voltage to 3.0 and turnon for APP */
+ twl6030_i2c_write_u8(TWL6030_CHIP_PM, 0x15, VMMC_CFG_VOLTATE);
+ twl6030_i2c_write_u8(TWL6030_CHIP_PM, 0x21, VMMC_CFG_STATE);
+}
+
void twl6030_usb_device_settings()
{
u8 data = 0;
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index d8ac8c0..228eac5 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -98,7 +98,9 @@
#define CONFIG_I2C_MULTI_BUS 1
/* TWL6030 */
+#ifndef CONFIG_SPL_BUILD
#define CONFIG_TWL6030_POWER 1
+#endif
/* MMC */
#define CONFIG_GENERIC_MMC 1
diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h
index 39d7154..9e03291 100644
--- a/include/configs/omap4_sdp4430.h
+++ b/include/configs/omap4_sdp4430.h
@@ -37,7 +37,9 @@
#include <configs/omap4_common.h>
/* Battery Charger */
+#ifndef CONFIG_SPL_BUILD
#define CONFIG_CMD_BAT 1
+#endif
/* ENV related config options */
#define CONFIG_ENV_IS_IN_MMC 1
diff --git a/include/twl6030.h b/include/twl6030.h
index 6ed68a0..a9fcadb 100644
--- a/include/twl6030.h
+++ b/include/twl6030.h
@@ -33,6 +33,8 @@
#define TWL6030_CHIP_PWM 0x49
/* Slave Address 0x48 */
+#define VMMC_CFG_STATE 0x9A
+#define VMMC_CFG_VOLTATE 0x9B
#define VUSB_CFG_STATE 0xA2
#define MISC1 0xE4
@@ -130,3 +132,4 @@
void twl6030_stop_usb_charging(void);
int twl6030_get_battery_voltage(void);
int twl6030_get_battery_current(void);
+void twl6030_power_mmc_init(void);