arm: ti: k3: Resync dts files and bindings with Linux Kernel v5.14
This resyncs the dts files for all of the currently in-tree K3
platforms, along with relevant bindings, with the v5.14 Linux Kernel
release. Of note are that the main-navss/mcu-navss nodes were renamed
to main_navss / mcu_navss and so the u-boot.dtsi files needed to be
updated to match.
Tested on j721e_evm and am65x_evm.
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi b/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi
index 8750de7..d2dceda 100644
--- a/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi
@@ -6,7 +6,7 @@
*/
&cbass_mcu_wakeup {
- dmsc: dmsc@44083000 {
+ dmsc: system-controller@44083000 {
compatible = "ti,k2g-sci";
ti,host-id = <12>;
@@ -23,7 +23,7 @@
#power-domain-cells = <2>;
};
- k3_clks: clocks {
+ k3_clks: clock-controller {
compatible = "ti,k2g-sci-clk";
#clock-cells = <2>;
};
@@ -73,8 +73,6 @@
wkup_uart0: serial@42300000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x42300000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -86,8 +84,6 @@
mcu_uart0: serial@40a00000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x40a00000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <96000000>;
current-speed = <115200>;
@@ -96,8 +92,9 @@
clock-names = "fclk";
};
- wkup_gpio_intr: interrupt-controller2 {
+ wkup_gpio_intr: interrupt-controller@42200000 {
compatible = "ti,sci-intr";
+ reg = <0x00 0x42200000 0x00 0x400>;
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
@@ -179,26 +176,8 @@
#size-cells = <2>;
ranges;
- hbmc_mux: hbmc-mux {
- compatible = "mmio-mux";
- #mux-control-cells = <1>;
- mux-reg-masks = <0x4 0x2>; /* HBMC select */
- };
-
- hbmc: hyperbus@47034000 {
- compatible = "ti,j721e-hbmc", "ti,am654-hbmc";
- reg = <0x0 0x47034000 0x0 0x100>,
- <0x5 0x00000000 0x1 0x0000000>;
- power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
- #address-cells = <2>;
- #size-cells = <1>;
- mux-controls = <&hbmc_mux 0>;
- assigned-clocks = <&k3_clks 102 0>;
- assigned-clock-rates = <250000000>;
- };
-
ospi0: spi@47040000 {
- compatible = "ti,am654-ospi";
+ compatible = "ti,am654-ospi", "cdns,qspi-nor";
reg = <0x0 0x47040000 0x0 0x100>,
<0x5 0x00000000 0x1 0x0000000>;
interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
@@ -215,7 +194,7 @@
};
ospi1: spi@47050000 {
- compatible = "ti,am654-ospi";
+ compatible = "ti,am654-ospi", "cdns,qspi-nor";
reg = <0x0 0x47050000 0x0 0x100>,
<0x7 0x00000000 0x1 0x00000000>;
interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
@@ -267,11 +246,11 @@
};
};
- mcu-navss {
+ mcu_navss: bus@28380000 {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
- ranges;
+ ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
dma-coherent;
dma-ranges;