arm: ti: k3: Resync dts files and bindings with Linux Kernel v5.14
This resyncs the dts files for all of the currently in-tree K3
platforms, along with relevant bindings, with the v5.14 Linux Kernel
release. Of note are that the main-navss/mcu-navss nodes were renamed
to main_navss / mcu_navss and so the u-boot.dtsi files needed to be
updated to match.
Tested on j721e_evm and am65x_evm.
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi b/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
index ac78d4c..1044ec6 100644
--- a/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
@@ -2,11 +2,11 @@
/*
* Device Tree Source for J7200 SoC Family MCU/WAKEUP Domain peripherals
*
- * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
*/
&cbass_mcu_wakeup {
- dmsc: dmsc@44083000 {
+ dmsc: system-controller@44083000 {
compatible = "ti,k2g-sci";
ti,host-id = <12>;
@@ -23,7 +23,7 @@
#power-domain-cells = <2>;
};
- k3_clks: clocks {
+ k3_clks: clock-controller {
compatible = "ti,k2g-sci-clk";
#clock-cells = <2>;
};
@@ -73,8 +73,6 @@
wkup_uart0: serial@42300000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x42300000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -86,8 +84,6 @@
mcu_uart0: serial@40a00000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x40a00000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <96000000>;
current-speed = <115200>;
@@ -96,8 +92,9 @@
clock-names = "fclk";
};
- wkup_gpio_intr: interrupt-controller2 {
+ wkup_gpio_intr: interrupt-controller@42200000 {
compatible = "ti,sci-intr";
+ reg = <0x00 0x42200000 0x00 0x400>;
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
@@ -107,6 +104,38 @@
ti,interrupt-ranges = <16 960 16>;
};
+ wkup_gpio0: gpio@42110000 {
+ compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+ reg = <0x00 0x42110000 0x00 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&wkup_gpio_intr>;
+ interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ti,ngpio = <85>;
+ ti,davinci-gpio-unbanked = <0>;
+ power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 113 0>;
+ clock-names = "gpio";
+ };
+
+ wkup_gpio1: gpio@42100000 {
+ compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+ reg = <0x00 0x42100000 0x00 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&wkup_gpio_intr>;
+ interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ti,ngpio = <85>;
+ ti,davinci-gpio-unbanked = <0>;
+ power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 114 0>;
+ clock-names = "gpio";
+ };
+
mcu_navss: bus@28380000 {
compatible = "simple-mfd";
#address-cells = <2>;
@@ -269,6 +298,23 @@
#size-cells = <1>;
mux-controls = <&hbmc_mux 0>;
};
+
+ ospi0: spi@47040000 {
+ compatible = "ti,am654-ospi", "cdns,qspi-nor";
+ reg = <0x0 0x47040000 0x0 0x100>,
+ <0x5 0x00000000 0x1 0x0000000>;
+ interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
+ cdns,fifo-depth = <256>;
+ cdns,fifo-width = <4>;
+ cdns,trigger-address = <0x0>;
+ clocks = <&k3_clks 103 0>;
+ assigned-clocks = <&k3_clks 103 0>;
+ assigned-clock-parents = <&k3_clks 103 2>;
+ assigned-clock-rates = <166666666>;
+ power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
tscadc0: tscadc@40200000 {