treewide: convert bd_t to struct bd_info by coccinelle
The Linux coding style guide (Documentation/process/coding-style.rst)
clearly says:
It's a **mistake** to use typedef for structures and pointers.
Besides, using typedef for structures is annoying when you try to make
headers self-contained.
Let's say you have the following function declaration in a header:
void foo(bd_t *bd);
This is not self-contained since bd_t is not defined.
To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h>
#include <asm/u-boot.h>
void foo(bd_t *bd);
Then, the include direcective pulls in more bloat needlessly.
If you use 'struct bd_info' instead, it is enough to put a forward
declaration as follows:
struct bd_info;
void foo(struct bd_info *bd);
Right, typedef'ing bd_t is a mistake.
I used coccinelle to generate this commit.
The semantic patch that makes this change is as follows:
<smpl>
@@
typedef bd_t;
@@
-bd_t
+struct bd_info
</smpl>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
diff --git a/board/compulab/cl-som-imx7/cl-som-imx7.c b/board/compulab/cl-som-imx7/cl-som-imx7.c
index 8b3bd5e..1eef1d5 100644
--- a/board/compulab/cl-som-imx7/cl-som-imx7.c
+++ b/board/compulab/cl-som-imx7/cl-som-imx7.c
@@ -80,7 +80,7 @@
{USDHC3_BASE_ADDR},
};
-int board_mmc_init(bd_t *bis)
+int board_mmc_init(struct bd_info *bis)
{
int i, ret;
/*
@@ -199,7 +199,7 @@
#define CL_SOM_IMX7_FEC_DEV_ID_PRI 0
-int board_eth_init(bd_t *bis)
+int board_eth_init(struct bd_info *bis)
{
/* set Ethernet MAC address environment */
cl_som_imx7_handle_mac_address("ethaddr", CONFIG_SYS_I2C_EEPROM_BUS);
diff --git a/board/compulab/cl-som-imx7/spl.c b/board/compulab/cl-som-imx7/spl.c
index 360c4df..9c7332b 100644
--- a/board/compulab/cl-som-imx7/spl.c
+++ b/board/compulab/cl-som-imx7/spl.c
@@ -23,7 +23,7 @@
static struct fsl_esdhc_cfg cl_som_imx7_spl_usdhc_cfg = {
USDHC1_BASE_ADDR, 0, 4};
-int board_mmc_init(bd_t *bis)
+int board_mmc_init(struct bd_info *bis)
{
cl_som_imx7_usdhc1_pads_set();
cl_som_imx7_spl_usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c
index 4d71bed..e271268 100644
--- a/board/compulab/cm_fx6/cm_fx6.c
+++ b/board/compulab/cm_fx6/cm_fx6.c
@@ -458,7 +458,7 @@
#define SB_FX6_I2C_EEPROM_BUS 0
#define NO_MAC_ADDR "No MAC address found for %s\n"
-int board_eth_init(bd_t *bis)
+int board_eth_init(struct bd_info *bis)
{
int err;
@@ -537,7 +537,7 @@
{ "jedec,spi-nor", MTD_DEV_TYPE_NOR, },
};
-int ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, struct bd_info *bd)
{
u32 baseboard_rev;
int nodeoffset;
diff --git a/board/compulab/cm_fx6/spl.c b/board/compulab/cm_fx6/spl.c
index 7d82435..c3c8161 100644
--- a/board/compulab/cm_fx6/spl.c
+++ b/board/compulab/cm_fx6/spl.c
@@ -356,7 +356,7 @@
.max_bus_width = 4,
};
-int board_mmc_init(bd_t *bis)
+int board_mmc_init(struct bd_info *bis)
{
cm_fx6_set_usdhc_iomux();
diff --git a/board/compulab/cm_t335/cm_t335.c b/board/compulab/cm_t335/cm_t335.c
index 75b56f7..a9ba2b7 100644
--- a/board/compulab/cm_t335/cm_t335.c
+++ b/board/compulab/cm_t335/cm_t335.c
@@ -128,7 +128,7 @@
#define AR8051_DEBUG_RGMII_CLK_DLY_REG 0x5
#define AR8051_RGMII_TX_CLK_DLY 0x100
-int board_eth_init(bd_t *bis)
+int board_eth_init(struct bd_info *bis)
{
int rv, n = 0;
const char *devname;
diff --git a/board/compulab/cm_t43/cm_t43.c b/board/compulab/cm_t43/cm_t43.c
index f26e42b..4b097c8 100644
--- a/board/compulab/cm_t43/cm_t43.c
+++ b/board/compulab/cm_t43/cm_t43.c
@@ -149,7 +149,7 @@
mdelay(2);
}
-int board_eth_init(bd_t *bis)
+int board_eth_init(struct bd_info *bis)
{
int rv;