| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2008-2009 Samsung Electronics |
| * Kyungmin Park <kyungmin.park@samsung.com> |
| */ |
| |
| #include <linux/compat.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/onenand.h> |
| #include <linux/mtd/samsung_onenand.h> |
| |
| #include <onenand_uboot.h> |
| |
| #include <asm/io.h> |
| #include <asm/arch/clock.h> |
| |
| int onenand_board_init(struct mtd_info *mtd) |
| { |
| struct onenand_chip *this = mtd->priv; |
| struct s5pc100_clock *clk = |
| (struct s5pc100_clock *)samsung_get_base_clock(); |
| struct samsung_onenand *onenand; |
| int value; |
| |
| this->base = (void *)S5PC100_ONENAND_BASE; |
| onenand = (struct samsung_onenand *)this->base; |
| |
| /* D0 Domain memory clock gating */ |
| value = readl(&clk->gate_d01); |
| value &= ~(1 << 2); /* CLK_ONENANDC */ |
| value |= (1 << 2); |
| writel(value, &clk->gate_d01); |
| |
| value = readl(&clk->src0); |
| value &= ~(1 << 24); /* MUX_1nand: 0 from HCLKD0 */ |
| value &= ~(1 << 20); /* MUX_HREF: 0 from FIN_27M */ |
| writel(value, &clk->src0); |
| |
| value = readl(&clk->div1); |
| value &= ~(3 << 16); /* PCLKD1_RATIO */ |
| value |= (1 << 16); |
| writel(value, &clk->div1); |
| |
| writel(ONENAND_MEM_RESET_COLD, &onenand->mem_reset); |
| |
| while (!(readl(&onenand->int_err_stat) & RST_CMP)) |
| continue; |
| |
| writel(RST_CMP, &onenand->int_err_ack); |
| |
| /* |
| * Access_Clock [2:0] |
| * 166 MHz, 134 Mhz : 3 |
| * 100 Mhz, 60 Mhz : 2 |
| */ |
| writel(0x3, &onenand->acc_clock); |
| |
| writel(INT_ERR_ALL, &onenand->int_err_mask); |
| writel(1 << 0, &onenand->int_pin_en); /* Enable */ |
| |
| value = readl(&onenand->int_err_mask); |
| value &= ~RDY_ACT; |
| writel(value, &onenand->int_err_mask); |
| |
| s3c_onenand_init(mtd); |
| |
| return 0; |
| } |