imx: fdt: fix cooling-device property corruption
The function disable_thermal_cpu_nodes() corrupts the cooling-device
property.
For example, booting an i.MX93 devices with only one A55 core (IMX93x1)
with the cooling-device property set to:
$ dtc -I dtb foo.dtb | grep cooling-device
cooling-device = <0x08 0xffffffff 0xffffffff 0x09 0xffffffff 0xffffffff>;
Linux shows the following error at boot:
[ 1.715189] OF: /thermal-zones/cpu-thermal/cooling-maps/map0: could not find phandle 1083699869
[ 1.723977] thermal_sys: Add a cooling_device property with at least one device
[ 1.731285] thermal thermal_zone0: binding zone cpu-thermal with cdev thermal-devfreq-0 failed:-2
because the cooling-device property in the device tree passed to the
kernel is
$ dtc -I dtb /sys/firmware/fdt | grep cooling-device
cooling-device = <0x4097f29d 0x00 0xb05aef9d>;
The issue is because the wrong variable type is passed to the function
fdt_setprop() called in the function disable_thermal_cpu_nodes(). With
the variable type fixed, the error at boot is gone and the property is
properly set:
$ dtc -I dtb /sys/firmware/fdt | grep cooling-device
cooling-device = <0x08 0xffffffff 0xffffffff>;
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
diff --git a/arch/arm/mach-imx/fdt.c b/arch/arm/mach-imx/fdt.c
index 103c1fc5..f19ab9e 100644
--- a/arch/arm/mach-imx/fdt.c
+++ b/arch/arm/mach-imx/fdt.c
@@ -39,7 +39,7 @@
for (j = 0; j < cnt; j++)
cooling_dev[j] = cpu_to_fdt32(cooling_dev[j]);
- ret = fdt_setprop(blob, nodeoff, "cooling-device", &cooling_dev,
+ ret = fdt_setprop(blob, nodeoff, "cooling-device", cooling_dev,
sizeof(__le32) * (num_le32 - num_disabled_cores * 3));
if (ret < 0) {
printf("Warning: %s, cooling-device setprop failed %d\n",