| /* |
| * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> |
| * |
| * Based on code: |
| * Copyright (C) 2005-2009 Samsung Electronics |
| * Kyungmin Park <kyungmin.park@samsung.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <asm/io.h> |
| #include <linux/mtd/onenand_regs.h> |
| #include <onenand_uboot.h> |
| |
| /* |
| * Device geometry: |
| * - 2048b page, 128k erase block. |
| * - 4096b page, 256k erase block. |
| */ |
| enum onenand_spl_pagesize { |
| PAGE_2K = 2048, |
| PAGE_4K = 4096, |
| }; |
| |
| #define ONENAND_PAGES_PER_BLOCK 64 |
| #define onenand_block_address(block) (block) |
| #define onenand_sector_address(page) (page << 2) |
| #define onenand_buffer_address() ((1 << 3) << 8) |
| #define onenand_bufferram_address(block) (0) |
| |
| static inline uint16_t onenand_readw(uint32_t addr) |
| { |
| return readw(CONFIG_SYS_ONENAND_BASE + addr); |
| } |
| |
| static inline void onenand_writew(uint16_t value, uint32_t addr) |
| { |
| writew(value, CONFIG_SYS_ONENAND_BASE + addr); |
| } |
| |
| static enum onenand_spl_pagesize onenand_spl_get_geometry(void) |
| { |
| uint32_t dev_id, density; |
| |
| if (!onenand_readw(ONENAND_REG_TECHNOLOGY)) { |
| dev_id = onenand_readw(ONENAND_REG_DEVICE_ID); |
| density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT; |
| density &= ONENAND_DEVICE_DENSITY_MASK; |
| |
| if (density < ONENAND_DEVICE_DENSITY_4Gb) |
| return PAGE_2K; |
| |
| if (dev_id & ONENAND_DEVICE_IS_DDP) |
| return PAGE_2K; |
| } |
| |
| return PAGE_4K; |
| } |
| |
| static int onenand_spl_read_page(uint32_t block, uint32_t page, uint32_t *buf, |
| enum onenand_spl_pagesize pagesize) |
| { |
| const uint32_t addr = CONFIG_SYS_ONENAND_BASE + ONENAND_DATARAM; |
| uint32_t offset; |
| |
| onenand_writew(onenand_block_address(block), |
| ONENAND_REG_START_ADDRESS1); |
| |
| onenand_writew(onenand_bufferram_address(block), |
| ONENAND_REG_START_ADDRESS2); |
| |
| onenand_writew(onenand_sector_address(page), |
| ONENAND_REG_START_ADDRESS8); |
| |
| onenand_writew(onenand_buffer_address(), |
| ONENAND_REG_START_BUFFER); |
| |
| onenand_writew(ONENAND_INT_CLEAR, ONENAND_REG_INTERRUPT); |
| |
| onenand_writew(ONENAND_CMD_READ, ONENAND_REG_COMMAND); |
| |
| while (!(onenand_readw(ONENAND_REG_INTERRUPT) & ONENAND_INT_READ)) |
| continue; |
| |
| /* Check for invalid block mark */ |
| if (page < 2 && (onenand_readw(ONENAND_SPARERAM) != 0xffff)) |
| return 1; |
| |
| for (offset = 0; offset < pagesize; offset += 4) |
| buf[offset / 4] = readl(addr + offset); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_SPL_UBI |
| /* Temporary storage for non page aligned and non page sized reads. */ |
| static u8 scratch_buf[PAGE_4K]; |
| |
| /** |
| * onenand_spl_read_block - Read data from physical eraseblock into a buffer |
| * @block: Number of the physical eraseblock |
| * @offset: Data offset from the start of @peb |
| * @len: Data size to read |
| * @dst: Address of the destination buffer |
| * |
| * Notes: |
| * @offset + @len are not allowed to be larger than a physical |
| * erase block. No sanity check done for simplicity reasons. |
| */ |
| int onenand_spl_read_block(int block, int offset, int len, void *dst) |
| { |
| int page, read; |
| static int psize; |
| |
| if (!psize) |
| psize = onenand_spl_get_geometry(); |
| |
| /* Calculate the page number */ |
| page = offset / psize; |
| /* Offset to the start of a flash page */ |
| offset = offset % psize; |
| |
| while (len) { |
| /* |
| * Non page aligned reads go to the scratch buffer. |
| * Page aligned reads go directly to the destination. |
| */ |
| if (offset || len < psize) { |
| onenand_spl_read_page(block, page, |
| (uint32_t *)scratch_buf, psize); |
| read = min(len, psize - offset); |
| memcpy(dst, scratch_buf + offset, read); |
| offset = 0; |
| } else { |
| onenand_spl_read_page(block, page, dst, psize); |
| read = psize; |
| } |
| page++; |
| len -= read; |
| dst += read; |
| } |
| return 0; |
| } |
| #endif |
| |
| void onenand_spl_load_image(uint32_t offs, uint32_t size, void *dst) |
| { |
| uint32_t *addr = (uint32_t *)dst; |
| uint32_t to_page; |
| uint32_t block; |
| uint32_t page, rpage; |
| enum onenand_spl_pagesize pagesize; |
| int ret; |
| |
| pagesize = onenand_spl_get_geometry(); |
| |
| /* |
| * The page can be either 2k or 4k, avoid using DIV_ROUND_UP to avoid |
| * pulling further unwanted functions into the SPL. |
| */ |
| if (pagesize == 2048) { |
| page = offs / 2048; |
| to_page = page + DIV_ROUND_UP(size, 2048); |
| } else { |
| page = offs / 4096; |
| to_page = page + DIV_ROUND_UP(size, 4096); |
| } |
| |
| for (; page <= to_page; page++) { |
| block = page / ONENAND_PAGES_PER_BLOCK; |
| rpage = page & (ONENAND_PAGES_PER_BLOCK - 1); |
| ret = onenand_spl_read_page(block, rpage, addr, pagesize); |
| if (ret) |
| page += ONENAND_PAGES_PER_BLOCK - 1; |
| else |
| addr += pagesize / 4; |
| } |
| } |