arm: dts: k3-am654-base-board: Add r5 specific u-boot dtsi
So far all the u-boot specific properties for both r5 and a53 are
placed in k3-am654-base-board-u-boot.dtsi. But there are few a53
nodes that should be updated but doesn't belong to r5. So create a
separate r5 specific u-boot dtsi.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210622063431.3151-4-lokeshvutla@ti.com
diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
index 2840258..77b7d3f 100644
--- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
@@ -1,207 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2018-2021 Texas Instruments Incorporated - http://www.ti.com/
*/
-#include <dt-bindings/pinctrl/k3.h>
-#include <dt-bindings/net/ti-dp83867.h>
-
-/ {
- chosen {
- stdout-path = "serial2:115200n8";
- };
-
- aliases {
- serial2 = &main_uart0;
- ethernet0 = &cpsw_port1;
- usb0 = &usb0;
- usb1 = &usb1;
- spi0 = &ospi0;
- spi1 = &ospi1;
- };
-};
-
-&cbass_main{
- u-boot,dm-spl;
- main-navss {
- u-boot,dm-spl;
- };
-};
-
-&cbass_mcu {
- u-boot,dm-spl;
-
- mcu-navss {
- u-boot,dm-spl;
-
- ringacc@2b800000 {
- reg = <0x0 0x2b800000 0x0 0x400000>,
- <0x0 0x2b000000 0x0 0x400000>,
- <0x0 0x28590000 0x0 0x100>,
- <0x0 0x2a500000 0x0 0x40000>,
- <0x0 0x28440000 0x0 0x40000>;
- reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
- u-boot,dm-spl;
- ti,dma-ring-reset-quirk;
- };
-
- dma-controller@285c0000 {
- reg = <0x0 0x285c0000 0x0 0x100>,
- <0x0 0x284c0000 0x0 0x4000>,
- <0x0 0x2a800000 0x0 0x40000>,
- <0x0 0x284a0000 0x0 0x4000>,
- <0x0 0x2aa00000 0x0 0x40000>,
- <0x0 0x28400000 0x0 0x2000>;
- reg-names = "gcfg", "rchan", "rchanrt", "tchan",
- "tchanrt", "rflow";
- u-boot,dm-spl;
- };
- };
-};
-
-&cbass_wakeup {
- u-boot,dm-spl;
-
- chipid@43000014 {
- u-boot,dm-spl;
- };
-};
-
-&secure_proxy_main {
- u-boot,dm-spl;
-};
-
-&dmsc {
- u-boot,dm-spl;
- k3_sysreset: sysreset-controller {
- compatible = "ti,sci-sysreset";
- u-boot,dm-spl;
- };
-};
-
-&k3_pds {
- u-boot,dm-spl;
-};
-
-&k3_clks {
- u-boot,dm-spl;
-};
-
-&k3_reset {
- u-boot,dm-spl;
-};
-
-&wkup_pmx0 {
- u-boot,dm-spl;
-
- wkup_i2c0_pins_default {
- u-boot,dm-spl;
- };
-};
-
-&main_pmx0 {
- u-boot,dm-spl;
- usb0_pins_default: usb0_pins_default {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */
- >;
- u-boot,dm-spl;
- };
-};
-
-&main_uart0_pins_default {
- u-boot,dm-spl;
-};
-
-&main_pmx1 {
- u-boot,dm-spl;
-};
-
-&wkup_pmx0 {
- mcu-fss0-ospi0-pins-default {
- u-boot,dm-spl;
- };
-};
-
-&main_uart0 {
- u-boot,dm-spl;
-};
-
-&main_mmc0_pins_default {
- u-boot,dm-spl;
-};
-
-&main_mmc1_pins_default {
- u-boot,dm-spl;
-};
-
-&sdhci0 {
- u-boot,dm-spl;
-};
-
-&sdhci1 {
- u-boot,dm-spl;
-};
-
-&davinci_mdio {
- phy0: ethernet-phy@0 {
- reg = <0>;
- /* TODO: phy reset: TCA9555RTWR(i2c:0x21)[p04].GPIO_MCU_RGMII_RSTN */
- ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
- ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
- };
-};
-
-&mcu_cpsw {
- reg = <0x0 0x46000000 0x0 0x200000>,
- <0x0 0x40f00200 0x0 0x2>;
- reg-names = "cpsw_nuss", "mac_efuse";
- /delete-property/ ranges;
-
- cpsw-phy-sel@40f04040 {
- compatible = "ti,am654-cpsw-phy-sel";
- reg= <0x0 0x40f04040 0x0 0x4>;
- reg-names = "gmii-sel";
- };
-};
-
-&wkup_i2c0 {
- u-boot,dm-spl;
-};
-
-&usb1 {
- dr_mode = "peripheral";
-};
-
-&fss {
- u-boot,dm-spl;
-};
-
-&ospi0 {
- u-boot,dm-spl;
-
- flash@0{
- u-boot,dm-spl;
- };
-};
-
-&dwc3_0 {
- status = "okay";
- u-boot,dm-spl;
-};
-
-&usb0_phy {
- status = "okay";
- u-boot,dm-spl;
-};
-
-&usb0 {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_pins_default>;
- dr_mode = "host";
- u-boot,dm-spl;
-};
-
-&scm_conf {
- u-boot,dm-spl;
-};
+#include "k3-am654-r5-base-board-u-boot.dtsi"