board: ge: bx50v3: Pass video bootargs for b850v3
Due to clock source restrictions on i.MX6, certain pixel clock rates can
not be supported. Hence default the resolution/frame rate during boot to a
supported value by passing video bootargs 1024x768@60 for
HDMI (Display Port1) and LVDS (Display Port2) on B850v3.
Signed-off-by: Ken Lin <ken.lin@advantech.com.tw>
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index 52f096e..c77fef6 100644
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -15,6 +15,7 @@
#include <asm/arch/imx-regs.h>
#include <asm/imx-common/gpio.h>
+#define BX50V3_BOOTARGS_EXTRA
#if defined(CONFIG_TARGET_GE_B450V3)
#define CONFIG_BOARD_NAME "General Electric B450v3"
#define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-b450v3.dtb"
@@ -24,6 +25,9 @@
#elif defined(CONFIG_TARGET_GE_B850V3)
#define CONFIG_BOARD_NAME "General Electric B850v3"
#define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-b850v3.dtb"
+#undef BX50V3_BOOTARGS_EXTRA
+#define BX50V3_BOOTARGS_EXTRA "video=DP-1:1024x768@60 " \
+ "video=HDMI-A-1:1024x768@60 "
#else
#define CONFIG_BOARD_NAME "General Electric BA16 Generic"
#define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-ba16.dtb"
@@ -166,7 +170,8 @@
"echo 'U-Boot upgraded. Please reset'; " \
"fi\0" \
"setargs=setenv bootargs console=${console},${baudrate} " \
- "root=/dev/${rootdev} rw rootwait cma=128M\0" \
+ "root=/dev/${rootdev} rw rootwait cma=128M " \
+ BX50V3_BOOTARGS_EXTRA "\0" \
"loadbootscript=" \
"ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \