diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index a50d66e..de45ba7 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -2,6 +2,7 @@
  *  Copyright (C) 1998	Dan Malek <dmalek@jlc.net>
  *  Copyright (C) 1999	Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
  *  Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
+ *  Copyright (C) 2007 Stefan Roese <sr@denx.de>, DENX Software Engineering
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -757,7 +758,6 @@
 #endif /* CONFIG_405EP */
 
 #if defined(CFG_OCM_DATA_ADDR) && defined(CFG_OCM_DATA_SIZE)
-/* test-only... (clean up later when NAND booting is supported) */
 #if defined(CONFIG_405EZ)
 	/********************************************************************
 	 * Setup OCM - On Chip Memory - PPC405EZ uses OCM Controller V2
@@ -786,41 +786,7 @@
 	mtdcr	ocmdsisdpc,r4
 
 	isync
-
-#if defined(CONFIG_NAND_SPL)
-	/*
-	 * 405EZ can boot from NAND Flash.
-	 * If we are booting the SPL (Pre-loader), copy code from
-	 * the mapped 4K NAND Flash to the OCM
-	 */
-	li	r4,(CFG_NAND_BOOT_SPL_SIZE >> 2) - 1
-	mtctr	r4
-	lis	r2,CFG_NAND_BOOT_SPL_SRC@h
-	ori	r2,r2,CFG_NAND_BOOT_SPL_SRC@l
-	lis	r3,CFG_NAND_BOOT_SPL_DST@h
-	ori	r3,r3,CFG_NAND_BOOT_SPL_DST@l
-spl_loop:
-	lwzu	r4,4(r2)
-	stwu	r4,4(r3)
-	bdnz	spl_loop
-
-	/*
-	 * Jump to code in OCM Ram
-	 */
-	bl 	00f
-00:	mflr	r10
-	lis	r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@h
-	ori	r3,r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@l
-	sub	r10,r10,r3
-	addi	r10,r10,28
-	mtlr	r10
-	blr
-start_ram:
-	sync
-	isync
-#endif
-#else
-/* ...test-only */
+#else /* CONFIG_405EZ */
 	/********************************************************************
 	 * Setup OCM - On Chip Memory
 	 *******************************************************************/
@@ -828,14 +794,15 @@
 	lis	r0, 0x7FFF
 	ori	r0, r0, 0xFFFF
 	mfdcr	r3, ocmiscntl		/* get instr-side IRAM config */
-	mfdcr	r4, ocmdscntl	/* get data-side IRAM config */
-	and	r3, r3, r0	/* disable data-side IRAM */
-	and	r4, r4, r0	/* disable data-side IRAM */
-	mtdcr	ocmiscntl, r3	/* set instr-side IRAM config */
-	mtdcr	ocmdscntl, r4	/* set data-side IRAM config */
+	mfdcr	r4, ocmdscntl		/* get data-side IRAM config */
+	and	r3, r3, r0		/* disable data-side IRAM */
+	and	r4, r4, r0		/* disable data-side IRAM */
+	mtdcr	ocmiscntl, r3		/* set instr-side IRAM config */
+	mtdcr	ocmdscntl, r4		/* set data-side IRAM config */
 	isync
 
-	addis	r3, 0, CFG_OCM_DATA_ADDR@h /* OCM location */
+	lis	r3,CFG_OCM_DATA_ADDR@h  /* OCM location */
+	ori	r3,r3,CFG_OCM_DATA_ADDR@l
 	mtdcr	ocmdsarc, r3
 	addis	r4, 0, 0xC000		/* OCM data area enabled */
 	mtdcr	ocmdscntl, r4