diff --git a/include/configs/imx8mp_dhcom_pdk2.h b/include/configs/imx8mp_dhcom_pdk2.h
new file mode 100644
index 0000000..7d5403f
--- /dev/null
+++ b/include/configs/imx8mp_dhcom_pdk2.h
@@ -0,0 +1,113 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2022 Marek Vasut <marex@denx.de>
+ */
+
+#ifndef __IMX8MP_DHCOM_PDK2_H
+#define __IMX8MP_DHCOM_PDK2_H
+
+#include <linux/sizes.h>
+#include <linux/stringify.h>
+#include <asm/arch/imx-regs.h>
+
+#define CONFIG_SYS_BOOTM_LEN		SZ_128M
+
+#define CONFIG_SPL_MAX_SIZE		(148 * 1024)
+#define CONFIG_SYS_MONITOR_LEN		SZ_1M
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SPL_STACK		0x96FC00
+#define CONFIG_SPL_BSS_START_ADDR	0x0096FC00
+#define CONFIG_SPL_BSS_MAX_SIZE		0x400	/* 1 KiB */
+#define CONFIG_SYS_SPL_MALLOC_START	0x4c000000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K	/* 512 kiB */
+
+/* For RAW image gives a error info not panic */
+#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+
+#endif
+
+/* Link Definitions */
+#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
+#define CONFIG_SYS_INIT_RAM_SIZE	0x200000
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define PHYS_SDRAM			0x40000000
+#define PHYS_SDRAM_SIZE			0x20000000 /* Minimum 512 MiB DDR */
+
+#define CONFIG_MXC_UART_BASE		UART1_BASE_ADDR
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		2048
+#define CONFIG_SYS_MAXARGS		64
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_PBSIZE		\
+	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* PHY needs a longer autonegotiation timeout after reset */
+#define PHY_ANEG_TIMEOUT		20000
+#define FEC_QUIRK_ENET_MAC
+
+/* USDHC */
+#define CONFIG_SYS_FSL_USDHC_NUM	2
+#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+
+#if !defined(CONFIG_SPL_BUILD)
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"altbootcmd=run bootcmd ; reset\0"				\
+	"bootlimit=3\0"							\
+	"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0"		\
+	"pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0"	\
+	"ramdisk_addr_r=0x58000000\0"					\
+	"scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0"		\
+	/* Give slow devices beyond USB HUB chance to come up. */	\
+	"usb_pgood_delay=2000\0"					\
+	"dfu_alt_info="							\
+		/* RAM block at DRAM offset 256..768 MiB */		\
+		"ram ram0=ram ram 0x50000000 0x20000000&"		\
+		/* 16 MiB SPI NOR */					\
+		"mtd nor0=sf raw 0x0 0x1000000\0"			\
+	"dh_update_env="						\
+		"setenv dh_update_env true ; saveenv ; saveenv\0"	\
+	"dh_update_sf_gen_fcfb="					\
+		"setexpr sfaddr ${loadaddr} - 0x1000 ; "		\
+		"base ${sfaddr} ; "					\
+		"mw 0 0 0x400 ; "					\
+		"mw 0x400 0x42464346 ; "				\
+		"mw 0x404 0x56010000 ; "				\
+		"mw 0x40c 00030300 ; "					\
+		"mw 0x444 0x00020101 ; "				\
+		"mw 0x450 0x10000000 ; "				\
+		"mw 0x480 0x0818040b ; "				\
+		"mw 0x484 0x24043008 ; "				\
+		"mw 0x5c0 0x100 ; "					\
+		"mw 0x5c4 0x10000 ; "					\
+		"base 0\0"						\
+	"dh_update_sf_write_data="					\
+		"setexpr sfaddr ${loadaddr} - 0x1000 ; "		\
+		"setexpr filesize ${filesize} + 0x1000 ; "		\
+		"sf probe && sf update ${sfaddr} 0 ${filesize}\0"	\
+	"dh_update_sd_to_sf="						\
+		"load mmc 0:1 ${loadaddr} boot/flash.bin && "		\
+		"run dh_update_sf_gen_fcfb dh_update_sf_write_data\0"	\
+	"dh_update_emmc_to_sf="						\
+		"load mmc 1:1 ${loadaddr} boot/flash.bin && "		\
+		"run dh_update_sf_gen_fcfb dh_update_sf_write_data\0"	\
+	BOOTENV
+
+#define BOOT_TARGET_DEVICES(func)	\
+	func(MMC, mmc, 0)		\
+	func(MMC, mmc, 1)		\
+	func(USB, usb, 0)		\
+	func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+
+#endif
+
+#endif