diff --git a/CHANGELOG b/CHANGELOG
index b7fa446..acf5f9c 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,10 @@
 Changes for U-Boot 1.0.0:
 ======================================================================
 
+* Modify XLB arbiter priorities on MPC5200 so all devices use same
+  priority; configure critical interrupts to be handled like external
+  interrupts
+
 * Make IPB clock on MGT5100/MPC5200 configurable in board config file;
   go back to 66 MHz for stability
 
diff --git a/config.mk b/config.mk
index f73d6f4..51ca5f0 100644
--- a/config.mk
+++ b/config.mk
@@ -102,7 +102,7 @@
 DBGFLAGS= -g #-DDEBUG
 OPTFLAGS= -Os #-fomit-frame-pointer
 ifndef LDSCRIPT
-#LDSCRIPT := board/$(BOARDDIR)/u-boot.lds.debug
+#LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug
 LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds
 endif
 OBJCFLAGS += --gap-fill=0xff
diff --git a/cpu/mpc5xxx/cpu_init.c b/cpu/mpc5xxx/cpu_init.c
index a33e250..c23d621 100644
--- a/cpu/mpc5xxx/cpu_init.c
+++ b/cpu/mpc5xxx/cpu_init.c
@@ -161,6 +161,9 @@
 	addecr |= 0x02;
 	*(vu_long *)MPC5XXX_CDM_CFG = addecr;
 #endif
+	/* Configure the XLB Arbiter */
+	*(vu_long *)MPC5XXX_XLBARB_MPRIEN = 0xff;
+	*(vu_long *)MPC5XXX_XLBARB_MPRIVAL = 0x11111111;
 #endif
 }
 
@@ -177,6 +180,8 @@
 #endif
 	*(vu_long *)MPC5XXX_ICTL_CRIT |= 0x0001ffff;
 	*(vu_long *)MPC5XXX_ICTL_EXT &= ~0x00000f00;
+	/* route critical ints to normal ints */
+	*(vu_long *)MPC5XXX_ICTL_EXT |= 0x00000001;
 
 #if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_MPC5XXX_FEC)
 	/* load FEC microcode */
diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h
index b38d7d4..49951f5 100644
--- a/include/mpc5xxx.h
+++ b/include/mpc5xxx.h
@@ -151,6 +151,13 @@
 #define MPC5XXX_CS_DEADCYCLE	(MPC5XXX_LPB + 0x002c)
 #endif
 
+#if defined(CONFIG_MPC5200)
+/* XLB Arbiter registers */
+#define MPC5XXX_XLBARB_CFG		(MPC5XXX_XLBARB + 0x40)
+#define MPC5XXX_XLBARB_MPRIEN	(MPC5XXX_XLBARB + 0x64)
+#define MPC5XXX_XLBARB_MPRIVAL	(MPC5XXX_XLBARB + 0x68)
+#endif
+
 /* GPIO registers */
 #define MPC5XXX_GPS_PORT_CONFIG	(MPC5XXX_GPIO + 0x0000)