OMAP3: drop CONFIG_SPL_OS_BOOT_KEY and use local define
CONFIG_SPL_OS_BOOT_KEY is used only in board files. It is
not required to have a general CONFIG_ option. Rename it and
define it in board directory.
Signed-off-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Tom Rini <trini@ti.com>
diff --git a/board/technexion/twister/twister.c b/board/technexion/twister/twister.c
index c9eea9b..fa0ace0 100644
--- a/board/technexion/twister/twister.c
+++ b/board/technexion/twister/twister.c
@@ -165,10 +165,10 @@
int spl_start_uboot(void)
{
int val = 0;
- if (!gpio_request(CONFIG_SPL_OS_BOOT_KEY, "U-Boot key")) {
- gpio_direction_input(CONFIG_SPL_OS_BOOT_KEY);
- val = gpio_get_value(CONFIG_SPL_OS_BOOT_KEY);
- gpio_free(CONFIG_SPL_OS_BOOT_KEY);
+ if (!gpio_request(SPL_OS_BOOT_KEY, "U-Boot key")) {
+ gpio_direction_input(SPL_OS_BOOT_KEY);
+ val = gpio_get_value(SPL_OS_BOOT_KEY);
+ gpio_free(SPL_OS_BOOT_KEY);
}
return val;
}
diff --git a/board/technexion/twister/twister.h b/board/technexion/twister/twister.h
index a2051c0..cff479c 100644
--- a/board/technexion/twister/twister.h
+++ b/board/technexion/twister/twister.h
@@ -38,6 +38,8 @@
#define XR16L2751_UART1_BASE 0x21000000
#define XR16L2751_UART2_BASE 0x23000000
+/* GPIO used to select between U-Boot and kernel */
+#define SPL_OS_BOOT_KEY 55
/*
* IEN - Input Enable
diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c
index 85685ee..b88d978 100644
--- a/board/timll/devkit8000/devkit8000.c
+++ b/board/timll/devkit8000/devkit8000.c
@@ -172,10 +172,10 @@
int spl_start_uboot(void)
{
int val = 0;
- if (!gpio_request(CONFIG_SPL_OS_BOOT_KEY, "U-Boot key")) {
- gpio_direction_input(CONFIG_SPL_OS_BOOT_KEY);
- val = gpio_get_value(CONFIG_SPL_OS_BOOT_KEY);
- gpio_free(CONFIG_SPL_OS_BOOT_KEY);
+ if (!gpio_request(SPL_OS_BOOT_KEY, "U-Boot key")) {
+ gpio_direction_input(SPL_OS_BOOT_KEY);
+ val = gpio_get_value(SPL_OS_BOOT_KEY);
+ gpio_free(SPL_OS_BOOT_KEY);
}
return !val;
}
diff --git a/board/timll/devkit8000/devkit8000.h b/board/timll/devkit8000/devkit8000.h
index aa69e6c..c1965e2 100644
--- a/board/timll/devkit8000/devkit8000.h
+++ b/board/timll/devkit8000/devkit8000.h
@@ -32,6 +32,9 @@
"NAND",
};
+/* GPIO used to select between U-Boot and kernel */
+#define SPL_OS_BOOT_KEY 26
+
/*
* IEN - Input Enable
* IDIS - Input Disable
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index d926f74..788227d 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -354,7 +354,6 @@
/* SPL OS boot options */
#define CONFIG_SPL_OS_BOOT
-#define CONFIG_SPL_OS_BOOT_KEY 26
#define CONFIG_CMD_SPL
#define CONFIG_CMD_SPL_WRITE_SIZE 0x400 /* 1024 byte */
diff --git a/include/configs/twister.h b/include/configs/twister.h
index a852481..4205a11 100644
--- a/include/configs/twister.h
+++ b/include/configs/twister.h
@@ -58,7 +58,6 @@
#define CONFIG_CMD_SPL_NAND_OFS (CONFIG_SYS_NAND_SPL_KERNEL_OFFS+\
0x600000)
#define CONFIG_SPL_OS_BOOT
-#define CONFIG_SPL_OS_BOOT_KEY 55
#define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100)
#define CONFIG_SPL_BOARD_INIT