sunxi: Hookup OTG USB controller support
Hookup OTG USB controller support and enable the otg controller + USB-keyb
on various tablets.
This allows tablet owners to interact with u-boot without needing to solder
a serial console onto their tablet PCB.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
diff --git a/arch/arm/include/asm/arch-sunxi/usbc.h b/arch/arm/include/asm/arch-sunxi/usbc.h
index 8d20973..cb538cd 100644
--- a/arch/arm/include/asm/arch-sunxi/usbc.h
+++ b/arch/arm/include/asm/arch-sunxi/usbc.h
@@ -11,6 +11,8 @@
* SPDX-License-Identifier: GPL-2.0+
*/
+extern const struct musb_platform_ops sunxi_musb_ops;
+
void *sunxi_usbc_get_io_base(int index);
int sunxi_usbc_request_resources(int index);
int sunxi_usbc_free_resources(int index);
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index cea356c..f1501d4 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -357,6 +357,15 @@
endchoice
+config USB_MUSB_SUNXI
+ bool "Enable sunxi OTG / DRC USB controller in host mode"
+ default n
+ ---help---
+ Say y here to enable support for the sunxi OTG / DRC USB controller
+ used on almost all sunxi boards. Note currently u-boot can only have
+ one usb host controller enabled at a time, so enabling this on boards
+ which also use the ehci host controller will result in build errors.
+
config USB_KEYBOARD
boolean "Enable USB keyboard support"
default y
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 6b19f75..b70e00c 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -28,7 +28,9 @@
#include <asm/arch/dram.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
+#include <asm/arch/usbc.h>
#include <asm/io.h>
+#include <linux/usb/musb.h>
#include <net.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -209,6 +211,26 @@
}
#endif
+#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET)
+static struct musb_hdrc_config musb_config = {
+ .multipoint = 1,
+ .dyn_fifo = 1,
+ .num_eps = 6,
+ .ram_bits = 11,
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_MUSB_HOST)
+ .mode = MUSB_HOST,
+#else
+ .mode = MUSB_PERIPHERAL,
+#endif
+ .config = &musb_config,
+ .power = 250,
+ .platform_ops = &sunxi_musb_ops,
+};
+#endif
+
#ifdef CONFIG_MISC_INIT_R
int misc_init_r(void)
{
@@ -228,6 +250,9 @@
eth_setenv_enetaddr("ethaddr", mac_addr);
}
+#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET)
+ musb_register(&musb_plat, NULL, (void *)SUNXI_USB0_BASE);
+#endif
return 0;
}
#endif
diff --git a/configs/Ippo_q8h_v1_2_defconfig b/configs/Ippo_q8h_v1_2_defconfig
index e68fff0..192a461 100644
--- a/configs/Ippo_q8h_v1_2_defconfig
+++ b/configs/Ippo_q8h_v1_2_defconfig
@@ -1,12 +1,13 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
CONFIG_FDTFILE="sun8i-a23-ippo-q8h-v1.2.dtb"
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB0_VBUS_PIN="axp_drivebus"
CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:167,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_DCLK_PHASE=0
CONFIG_VIDEO_LCD_POWER="PH7"
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
-CONFIG_USB_KEYBOARD=n
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN8I=y
diff --git a/configs/Ippo_q8h_v5_defconfig b/configs/Ippo_q8h_v5_defconfig
index a26fbb6..c894948 100644
--- a/configs/Ippo_q8h_v5_defconfig
+++ b/configs/Ippo_q8h_v5_defconfig
@@ -1,12 +1,13 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
CONFIG_FDTFILE="sun8i-a23-ippo-q8h-v5.dtb"
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB0_VBUS_PIN="axp_drivebus"
CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:168,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_DCLK_PHASE=0
CONFIG_VIDEO_LCD_POWER="PH7"
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
-CONFIG_USB_KEYBOARD=n
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN8I=y
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index e839053..7a66a4d 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -247,8 +247,16 @@
#endif
#ifdef CONFIG_USB_EHCI
-#define CONFIG_CMD_USB
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
+#endif
+
+#ifdef CONFIG_USB_MUSB_SUNXI
+#define CONFIG_MUSB_HOST
+#define CONFIG_MUSB_PIO_ONLY
+#endif
+
+#if defined CONFIG_USB_EHCI || defined CONFIG_USB_MUSB_SUNXI
+#define CONFIG_CMD_USB
#define CONFIG_USB_STORAGE
#endif