ARM: use r9 for gd
To be more EABI compliant and as a preparation for building
with clang, use the platform-specific r9 register for gd
instead of r8.
note: The FIQ is not updated since it is not used in u-boot,
and under discussion for the time being.
The following checkpatch warning is ignored:
WARNING: Use of volatile is usually wrong: see
Documentation/volatile-considered-harmful.txt
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S
index 960d12e..ac54b93 100644
--- a/arch/arm/lib/crt0.S
+++ b/arch/arm/lib/crt0.S
@@ -69,7 +69,7 @@
bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
sub sp, #GD_SIZE /* allocate one GD above SP */
bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
- mov r8, sp /* GD is above SP */
+ mov r9, sp /* GD is above SP */
mov r0, #0
bl board_init_f
@@ -81,15 +81,15 @@
* 'here' but relocated.
*/
- ldr sp, [r8, #GD_START_ADDR_SP] /* sp = gd->start_addr_sp */
+ ldr sp, [r9, #GD_START_ADDR_SP] /* sp = gd->start_addr_sp */
bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
- ldr r8, [r8, #GD_BD] /* r8 = gd->bd */
- sub r8, r8, #GD_SIZE /* new GD is below bd */
+ ldr r9, [r9, #GD_BD] /* r9 = gd->bd */
+ sub r9, r9, #GD_SIZE /* new GD is below bd */
adr lr, here
- ldr r0, [r8, #GD_RELOC_OFF] /* r0 = gd->reloc_off */
+ ldr r0, [r9, #GD_RELOC_OFF] /* r0 = gd->reloc_off */
add lr, lr, r0
- ldr r0, [r8, #GD_RELOCADDR] /* r0 = gd->relocaddr */
+ ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */
b relocate_code
here:
@@ -111,8 +111,8 @@
bl red_led_on
/* call board_init_r(gd_t *id, ulong dest_addr) */
- mov r0, r8 /* gd_t */
- ldr r1, [r8, #GD_RELOCADDR] /* dest_addr */
+ mov r0, r9 /* gd_t */
+ ldr r1, [r9, #GD_RELOCADDR] /* dest_addr */
/* call board_init_r */
ldr pc, =board_init_r /* this is auto-relocated! */