powerpc/mpc85xx:Increase binary size for P, B & T series boards.
u-boot binary size for Freescale mpc85xx platforms is 512KB.
This has been reached to upper limit for some of the platforms causig
linker error.
So, Increase the u-boot binary size to 768KB.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
diff --git a/board/freescale/c29xpcie/README b/board/freescale/c29xpcie/README
index 430f0824..3bc396b 100644
--- a/board/freescale/c29xpcie/README
+++ b/board/freescale/c29xpcie/README
@@ -62,9 +62,9 @@
2. Program u-boot.bin into NOR flash
=> tftp $loadaddr $uboot
- => protect off eff80000 +$filesize
- => erase eff80000 +$filesize
- => cp.b $loadaddr eff80000 $filesize
+ => protect off eff40000 +$filesize
+ => erase eff40000 +$filesize
+ => cp.b $loadaddr eff40000 $filesize
3. Check SW5[1:4]= 1111 and SW5[6]=0, then power on.
@@ -73,9 +73,9 @@
There are four banks in C29XPCIE board, example to change bank booting:
1. Program u-boot.bin into alternate NOR bank
=> tftp $loadaddr $uboot
- => protect off e9f80000 +$filesize
- => erase e9f80000 +$filesize
- => cp.b $loadaddr e9f80000 $filesize
+ => protect off e9f40000 +$filesize
+ => erase e9f40000 +$filesize
+ => cp.b $loadaddr e9f40000 $filesize
2. Switch to alternate NOR bank
=> cpld_cmd reset altbank [bank]
diff --git a/board/freescale/p1010rdb/README.P1010RDB-PA b/board/freescale/p1010rdb/README.P1010RDB-PA
index 158a1b3..cde246d 100644
--- a/board/freescale/p1010rdb/README.P1010RDB-PA
+++ b/board/freescale/p1010rdb/README.P1010RDB-PA
@@ -104,9 +104,9 @@
2. Burn u-boot.bin into NOR flash
=> tftp $loadaddr $uboot
- => protect off eff80000 +$filesize
- => erase eff80000 +$filesize
- => cp.b $loadaddr eff80000 $filesize
+ => protect off eff40000 +$filesize
+ => erase eff40000 +$filesize
+ => cp.b $loadaddr eff40000 $filesize
3. Check SW4[1:4]= 1111 and SW6[4]=0, then power on.
@@ -115,9 +115,9 @@
==================
1. Burn u-boot.bin into alternate NOR bank
=> tftp $loadaddr $uboot
- => protect off eef80000 +$filesize
- => erase eef80000 +$filesize
- => cp.b $loadaddr eef80000 $filesize
+ => protect off eef40000 +$filesize
+ => erase eef40000 +$filesize
+ => cp.b $loadaddr eef40000 $filesize
2. Switch to alternate NOR bank
=> mw.b ffb00009 1
diff --git a/board/freescale/p1010rdb/README.P1010RDB-PB b/board/freescale/p1010rdb/README.P1010RDB-PB
index cf459b3..c5d1419 100644
--- a/board/freescale/p1010rdb/README.P1010RDB-PB
+++ b/board/freescale/p1010rdb/README.P1010RDB-PB
@@ -149,11 +149,11 @@
1. NOR boot
=> tftp 1000000 u-boot.bin
For bank0
- => pro off all;era eff80000 efffffff;cp.b 1000000 eff80000 $filesize
+ => pro off all;era eff40000 efffffff;cp.b 1000000 eff40000 $filesize
set SW1[8]=0, SW4[1:4]= 1111 and SW3[3:4]= 00, then power on the board
For bank1
- => pro off all;era eef80000 eeffffff;cp.b 1000000 eef80000 $filesize
+ => pro off all;era eef40000 eeffffff;cp.b 1000000 eef40000 $filesize
set SW1[8]=1, SW4[1:4]= 1111 and SW3[3:4]= 00, then power on the board
2. NAND boot
diff --git a/board/freescale/p1023rds/README b/board/freescale/p1023rds/README
index 685f5da..d382551 100644
--- a/board/freescale/p1023rds/README
+++ b/board/freescale/p1023rds/README
@@ -62,8 +62,8 @@
NOR flash boot:
=> tftp 1000000 u-boot.bin
=> protect off all
- => erase eff80000 efffffff
- => cp.b 1000000 eff80000 80000
+ => erase eff40000 efffffff
+ => cp.b 1000000 eff40000 c0000
NAND flash boot:
=> tftp 1000000 u-boot-nand.bin
diff --git a/board/freescale/p1_p2_rdb/README b/board/freescale/p1_p2_rdb/README
index cb664a5..cd66e58 100644
--- a/board/freescale/p1_p2_rdb/README
+++ b/board/freescale/p1_p2_rdb/README
@@ -20,8 +20,8 @@
0xef00_0000 - 0xef7f_ffff Alternate bank 8MB
0xe800_0000 - 0xefff_ffff Boot bank 8MB
-0xef78_0000 - 0xef7f_ffff Alternate u-boot address 512KB
-0xeff8_0000 - 0xefff_ffff Boot u-boot address 512KB
+0xef74_0000 - 0xef7f_ffff Alternate u-boot address 768KB
+0xeff4_0000 - 0xefff_ffff Boot u-boot address 768KB
Switch settings to boot from the NOR flash banks
------------------------------------------------
@@ -33,16 +33,16 @@
To place a new u-boot image in the alternate flash bank and then boot
with that new image temporarily, use this:
tftp 1000000 u-boot.bin
- erase ef780000 ef7fffff
- cp.b 1000000 ef780000 80000
+ erase ef740000 ef7fffff
+ cp.b 1000000 ef740000 c0000
Now to boot from the alternate bank change the SW4[8] from 0 to 1.
To program the image in the boot flash bank:
tftp 1000000 u-boot.bin
protect off all
- erase eff80000 ffffffff
- cp.b 1000000 eff80000 80000
+ erase eff40000 ffffffff
+ cp.b 1000000 eff40000 c0000
Using the Device Tree Source File
---------------------------------
diff --git a/board/freescale/p2041rdb/README b/board/freescale/p2041rdb/README
index 292d0d3..9b5539f 100644
--- a/board/freescale/p2041rdb/README
+++ b/board/freescale/p2041rdb/README
@@ -18,8 +18,8 @@
2. Program image
=> tftp 1000000 u-boot.bin
=> protect off all
- => erase eff80000 efffffff
- => cp.b 1000000 eff80000 80000
+ => erase eff40000 efffffff
+ => cp.b 1000000 eff40000 c0000
3. Program RCW
=> tftp 1000000 rcw.bin
@@ -30,8 +30,8 @@
4. Program FMAN Firmware ucode
=> tftp 1000000 ucode.bin
=> protect off all
- => erase ef000000 ef0fffff
- => cp.b 1000000 ef000000 2000
+ => erase eff00000 eff3ffff
+ => cp.b 1000000 eff00000 2000
5. Change DIP-switch
SW1[1-5] = 10110
@@ -50,11 +50,11 @@
3. Program the PBL image to SDCard
=> tftp 1000000 pbl_sd.bin
=> mmcinfo
- => mmc write 1000000 8 441
+ => mmc write 1000000 8 672
4. Program FMAN Firmware ucode
=> tftp 1000000 ucode.bin
- => mmc write 1000000 46a 10
+ => mmc write 1000000 690 10
5. Change DIP-switch
SW1[1-5] = 01100
diff --git a/board/freescale/t1040qds/README b/board/freescale/t1040qds/README
index f8b53b4..6d380ae 100644
--- a/board/freescale/t1040qds/README
+++ b/board/freescale/t1040qds/README
@@ -118,16 +118,16 @@
NOR Flash memory Map on T1040QDS
--------------------------------
Start End Definition Size
-0xEFF80000 0xEFFFFFFF u-boot (current bank) 512KB
-0xEFF60000 0xEFF7FFFF u-boot env (current bank) 128KB
-0xEFF40000 0xEFF5FFFF FMAN Ucode (current bank) 128KB
+0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB
+0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB
+0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB
0xED300000 0xEFF3FFFF rootfs (alt bank) 44MB + 256KB
0xEC800000 0xEC8FFFF Hardware device tree (alt bank) 1MB
0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB
0xEC000000 0xEC01FFFF RCW (alt bank) 128KB
-0xEBF80000 0xEBFFFFFF u-boot (alt bank) 512KB
-0xEBF60000 0xEBF7FFFF u-boot env (alt bank) 128KB
-0xEBF40000 0xEBF5FFFF FMAN ucode (alt bank) 128KB
+0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB
+0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB
+0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB
0xE9300000 0xEBF3FFFF rootfs (current bank) 44MB + 256KB
0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB
0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB
diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README
index 2cd8219..11e03bd 100644
--- a/board/freescale/t104xrdb/README
+++ b/board/freescale/t104xrdb/README
@@ -161,16 +161,16 @@
NOR Flash memory Map
---------------------
Start End Definition Size
-0xEFF80000 0xEFFFFFFF u-boot (current bank) 512KB
-0xEFF60000 0xEFF7FFFF u-boot env (current bank) 128KB
-0xEFF40000 0xEFF5FFFF FMAN Ucode (current bank) 128KB
+0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB
+0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB
+0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB
0xED300000 0xEFF3FFFF rootfs (alt bank) 44MB + 256KB
0xEC800000 0xEC8FFFF Hardware device tree (alt bank) 1MB
0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB
0xEC000000 0xEC01FFFF RCW (alt bank) 128KB
-0xEBF80000 0xEBFFFFFF u-boot (alt bank) 512KB
-0xEBF60000 0xEBF7FFFF u-boot env (alt bank) 128KB
-0xEBF40000 0xEBF5FFFF FMAN ucode (alt bank) 128KB
+0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB
+0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB
+0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB
0xE9300000 0xEBF3FFFF rootfs (current bank) 44MB + 256KB
0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB
0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB