arm, spl, at91: add at91sam9260 and at91sam9g45 spl support
add support for using spl code on at91sam9260 and at91sam9g45
based boards.
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Bo Shen <voice.shen@atmel.com>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
[adopt Bo's change in spl.c]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
diff --git a/arch/arm/include/asm/arch-at91/at91sam9_sdramc.h b/arch/arm/include/asm/arch-at91/at91sam9_sdramc.h
index 5c98cc7..3a076c6 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9_sdramc.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9_sdramc.h
@@ -25,6 +25,21 @@
#define AT91_ASM_SDRAMC_CR (ATMEL_BASE_SDRAMC + 0x08)
#define AT91_ASM_SDRAMC_MDR (ATMEL_BASE_SDRAMC + 0x24)
+#else
+struct sdramc_reg {
+ u32 mr;
+ u32 tr;
+ u32 cr;
+ u32 lpr;
+ u32 ier;
+ u32 idr;
+ u32 imr;
+ u32 isr;
+ u32 mdr;
+};
+
+int sdramc_initialize(unsigned int sdram_address,
+ const struct sdramc_reg *p);
#endif
/* SDRAM Controller (SDRAMC) registers */
@@ -62,11 +77,17 @@
#define AT91_SDRAMC_DBW_32 (0 << 7)
#define AT91_SDRAMC_DBW_16 (1 << 7)
#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */
+#define AT91_SDRAMC_TWR_VAL(x) (x << 8)
#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */
+#define AT91_SDRAMC_TRC_VAL(x) (x << 12)
#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */
+#define AT91_SDRAMC_TRP_VAL(x) (x << 16)
#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */
+#define AT91_SDRAMC_TRCD_VAL(x) (x << 20)
#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */
+#define AT91_SDRAMC_TRAS_VAL(x) (x << 24)
#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */
+#define AT91_SDRAMC_TXSR_VAL(x) (x << 28)
#define AT91_SDRAMC_LPR (ATMEL_BASE_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */
#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */
@@ -93,5 +114,4 @@
#define AT91_SDRAMC_MD_SDRAM 0
#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1
-
#endif