board: freescale: lx2160a: remove code under !CONFIG_DM_ETH
Now that DM_ETH is enabled by default, there is no point in keeping the
non-DM_ETH code which initialized the ethernet interfaces.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
diff --git a/board/freescale/lx2160a/eth_lx2160aqds.c b/board/freescale/lx2160a/eth_lx2160aqds.c
index 374d052..9939bb6 100644
--- a/board/freescale/lx2160a/eth_lx2160aqds.c
+++ b/board/freescale/lx2160a/eth_lx2160aqds.c
@@ -4,575 +4,15 @@
*
*/
-#include <common.h>
-#include <env.h>
-#include <fdt_support.h>
-#include <hwconfig.h>
-#include <command.h>
-#include <log.h>
-#include <net.h>
-#include <netdev.h>
-#include <malloc.h>
-#include <fsl_mdio.h>
-#include <miiphy.h>
-#include <phy.h>
-#include <fm_eth.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <exports.h>
-#include <asm/arch/fsl_serdes.h>
#include <fsl-mc/fsl_mc.h>
-#include <fsl-mc/ldpaa_wriop.h>
-#include <linux/libfdt.h>
-
-#include "../common/qixis.h"
DECLARE_GLOBAL_DATA_PTR;
-#ifndef CONFIG_DM_ETH
-#define EMI_NONE 0
-#define EMI1 1 /* Mdio Bus 1 */
-#define EMI2 2 /* Mdio Bus 2 */
-
-#if defined(CONFIG_FSL_MC_ENET)
-enum io_slot {
- IO_SLOT_NONE = 0,
- IO_SLOT_1,
- IO_SLOT_2,
- IO_SLOT_3,
- IO_SLOT_4,
- IO_SLOT_5,
- IO_SLOT_6,
- IO_SLOT_7,
- IO_SLOT_8,
- EMI1_RGMII1,
- EMI1_RGMII2,
- IO_SLOT_MAX
-};
-
-struct lx2160a_qds_mdio {
- enum io_slot ioslot : 4;
- u8 realbusnum : 4;
- struct mii_dev *realbus;
-};
-
-/* structure explaining the phy configuration on 8 lanes of a serdes*/
-struct serdes_phy_config {
- u8 serdes; /* serdes protocol */
- struct phy_config {
- u8 dpmacid;
- /* -1 terminated array */
- int phy_address[WRIOP_MAX_PHY_NUM + 1];
- u8 mdio_bus;
- enum io_slot ioslot;
- } phy_config[SRDS_MAX_LANES];
-};
-
-/* Table defining the phy configuration on 8 lanes of a serdes.
- * Various assumptions have been made while defining this table.
- * e.g. for serdes1 protocol 19 it is being assumed that X-M11-USXGMII
- * card is being used for dpmac 3-4. (X-M12-XFI could also have been used)
- * And also that this card is connected to IO Slot 1 (could have been connected
- * to any of the 8 IO slots (IO slot 1 - IO slot 8)).
- * similarly, it is also being assumed that MDIO 1 is selected on X-M7-40G card
- * used in serdes1 protocol 19 (could have selected MDIO 2)
- * To override these settings "dpmac" environment variable can be used after
- * defining "dpmac_override" in hwconfig environment variable.
- * This table has limited serdes protocol entries. It can be expanded as per
- * requirement.
- */
-static const struct serdes_phy_config serdes1_phy_config[] = {
- {3, {{WRIOP1_DPMAC3, {AQ_PHY_ADDR1, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC4, {AQ_PHY_ADDR2, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC5, {AQ_PHY_ADDR3, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC6, {AQ_PHY_ADDR4, -1},
- EMI1, IO_SLOT_1} } },
- {7, {{WRIOP1_DPMAC3, {AQ_PHY_ADDR1, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC4, {AQ_PHY_ADDR2, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC5, {AQ_PHY_ADDR3, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC6, {AQ_PHY_ADDR4, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC7, {SGMII_CARD_PORT1_PHY_ADDR, -1},
- EMI1, IO_SLOT_2},
- {WRIOP1_DPMAC8, {SGMII_CARD_PORT2_PHY_ADDR, -1},
- EMI1, IO_SLOT_2},
- {WRIOP1_DPMAC9, {SGMII_CARD_PORT3_PHY_ADDR, -1},
- EMI1, IO_SLOT_2},
- {WRIOP1_DPMAC10, {SGMII_CARD_PORT4_PHY_ADDR, -1},
- EMI1, IO_SLOT_2} } },
- {8, {} },
- {13, {{WRIOP1_DPMAC1, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC2, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
- EMI1, IO_SLOT_2} } },
- {14, {{WRIOP1_DPMAC1, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
- EMI1, IO_SLOT_1} } },
- {15, {{WRIOP1_DPMAC1, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC2, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
- EMI1, IO_SLOT_1} } },
- {17, {{WRIOP1_DPMAC3, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC4, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC5, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC6, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
- EMI1, IO_SLOT_1} } },
- {19, {{WRIOP1_DPMAC2, {CORTINA_PHY_ADDR1, -1},
- EMI1, IO_SLOT_2},
- {WRIOP1_DPMAC3, {AQ_PHY_ADDR1, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC4, {AQ_PHY_ADDR2, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC5, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
- EMI1, IO_SLOT_6},
- {WRIOP1_DPMAC6, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
- EMI1, IO_SLOT_6} } },
- {20, {{WRIOP1_DPMAC1, {CORTINA_PHY_ADDR1, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC2, {CORTINA_PHY_ADDR1, -1},
- EMI1, IO_SLOT_2} } }
-};
-
-static const struct serdes_phy_config serdes2_phy_config[] = {
- {2, {} },
- {3, {} },
- {5, {} },
- {11, {{WRIOP1_DPMAC12, {SGMII_CARD_PORT2_PHY_ADDR, -1},
- EMI1, IO_SLOT_7},
- {WRIOP1_DPMAC17, {SGMII_CARD_PORT3_PHY_ADDR, -1},
- EMI1, IO_SLOT_7},
- {WRIOP1_DPMAC18, {SGMII_CARD_PORT4_PHY_ADDR, -1},
- EMI1, IO_SLOT_7},
- {WRIOP1_DPMAC16, {SGMII_CARD_PORT2_PHY_ADDR, -1},
- EMI1, IO_SLOT_8},
- {WRIOP1_DPMAC13, {SGMII_CARD_PORT3_PHY_ADDR, -1},
- EMI1, IO_SLOT_8},
- {WRIOP1_DPMAC14, {SGMII_CARD_PORT4_PHY_ADDR, -1},
- EMI1, IO_SLOT_8} } },
-};
-
-static const struct serdes_phy_config serdes3_phy_config[] = {
- {2, {} },
- {3, {} }
-};
-
-static inline
-const struct phy_config *get_phy_config(u8 serdes,
- const struct serdes_phy_config *table,
- u8 table_size)
-{
- int i;
-
- for (i = 0; i < table_size; i++) {
- if (table[i].serdes == serdes)
- return table[i].phy_config;
- }
-
- return NULL;
-}
-
-/* BRDCFG4 controls EMI routing for the board.
- * Bits Function
- * 7-6 EMI Interface #1 Primary Routing (CFG_MUX1_EMI1) (1.8V):
- * EMI1 00= On-board PHY #1
- * 01= On-board PHY #2
- * 10= (reserved)
- * 11= Slots 1..8 multiplexer and translator.
- * 5-3 EMI Interface #1 Secondary Routing (CFG_MUX2_EMI1) (2.5V):
- * EMI1X 000= Slot #1
- * 001= Slot #2
- * 010= Slot #3
- * 011= Slot #4
- * 100= Slot #5
- * 101= Slot #6
- * 110= Slot #7
- * 111= Slot #8
- * 2-0 EMI Interface #2 Routing (CFG_MUX_EMI2):
- * EMI2 000= Slot #1 (secondary EMI)
- * 001= Slot #2 (secondary EMI)
- * 010= Slot #3 (secondary EMI)
- * 011= Slot #4 (secondary EMI)
- * 100= Slot #5 (secondary EMI)
- * 101= Slot #6 (secondary EMI)
- * 110= Slot #7 (secondary EMI)
- * 111= Slot #8 (secondary EMI)
- */
-static int lx2160a_qds_get_mdio_mux_val(u8 realbusnum, enum io_slot ioslot)
-{
- switch (realbusnum) {
- case EMI1:
- switch (ioslot) {
- case EMI1_RGMII1:
- return 0;
- case EMI1_RGMII2:
- return 0x40;
- default:
- return (((ioslot - 1) << BRDCFG4_EMI1SEL_SHIFT) | 0xC0);
- }
- break;
- case EMI2:
- return ((ioslot - 1) << BRDCFG4_EMI2SEL_SHIFT);
- default:
- return -1;
- }
-}
-
-static void lx2160a_qds_mux_mdio(struct lx2160a_qds_mdio *priv)
-{
- u8 brdcfg4, mux_val, reg;
-
- brdcfg4 = QIXIS_READ(brdcfg[4]);
- reg = brdcfg4;
- mux_val = lx2160a_qds_get_mdio_mux_val(priv->realbusnum, priv->ioslot);
-
- switch (priv->realbusnum) {
- case EMI1:
- brdcfg4 &= ~BRDCFG4_EMI1SEL_MASK;
- brdcfg4 |= mux_val;
- break;
- case EMI2:
- brdcfg4 &= ~BRDCFG4_EMI2SEL_MASK;
- brdcfg4 |= mux_val;
- break;
- }
-
- if (brdcfg4 ^ reg)
- QIXIS_WRITE(brdcfg[4], brdcfg4);
-}
-
-static int lx2160a_qds_mdio_read(struct mii_dev *bus, int addr,
- int devad, int regnum)
-{
- struct lx2160a_qds_mdio *priv = bus->priv;
-
- lx2160a_qds_mux_mdio(priv);
-
- return priv->realbus->read(priv->realbus, addr, devad, regnum);
-}
-
-static int lx2160a_qds_mdio_write(struct mii_dev *bus, int addr, int devad,
- int regnum, u16 value)
-{
- struct lx2160a_qds_mdio *priv = bus->priv;
-
- lx2160a_qds_mux_mdio(priv);
-
- return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
-}
-
-static int lx2160a_qds_mdio_reset(struct mii_dev *bus)
-{
- struct lx2160a_qds_mdio *priv = bus->priv;
-
- return priv->realbus->reset(priv->realbus);
-}
-
-static struct mii_dev *lx2160a_qds_mdio_init(u8 realbusnum, enum io_slot ioslot)
-{
- struct lx2160a_qds_mdio *pmdio;
- struct mii_dev *bus;
- /*should be within MDIO_NAME_LEN*/
- char dummy_mdio_name[] = "LX2160A_QDS_MDIO1_IOSLOT1";
-
- if (realbusnum == EMI2) {
- if (ioslot < IO_SLOT_1 || ioslot > IO_SLOT_8) {
- printf("invalid ioslot %d\n", ioslot);
- return NULL;
- }
- } else if (realbusnum == EMI1) {
- if (ioslot < IO_SLOT_1 || ioslot > EMI1_RGMII2) {
- printf("invalid ioslot %d\n", ioslot);
- return NULL;
- }
- } else {
- printf("not supported real mdio bus %d\n", realbusnum);
- return NULL;
- }
-
- if (ioslot == EMI1_RGMII1)
- strcpy(dummy_mdio_name, "LX2160A_QDS_MDIO1_RGMII1");
- else if (ioslot == EMI1_RGMII2)
- strcpy(dummy_mdio_name, "LX2160A_QDS_MDIO1_RGMII2");
- else
- sprintf(dummy_mdio_name, "LX2160A_QDS_MDIO%d_IOSLOT%d",
- realbusnum, ioslot);
- bus = miiphy_get_dev_by_name(dummy_mdio_name);
-
- if (bus)
- return bus;
-
- bus = mdio_alloc();
- if (!bus) {
- printf("Failed to allocate %s bus\n", dummy_mdio_name);
- return NULL;
- }
-
- pmdio = malloc(sizeof(*pmdio));
- if (!pmdio) {
- printf("Failed to allocate %s private data\n", dummy_mdio_name);
- free(bus);
- return NULL;
- }
-
- switch (realbusnum) {
- case EMI1:
- pmdio->realbus =
- miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME);
- break;
- case EMI2:
- pmdio->realbus =
- miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME);
- break;
- }
-
- if (!pmdio->realbus) {
- printf("No real mdio bus num %d found\n", realbusnum);
- free(bus);
- free(pmdio);
- return NULL;
- }
-
- pmdio->realbusnum = realbusnum;
- pmdio->ioslot = ioslot;
- bus->read = lx2160a_qds_mdio_read;
- bus->write = lx2160a_qds_mdio_write;
- bus->reset = lx2160a_qds_mdio_reset;
- strcpy(bus->name, dummy_mdio_name);
- bus->priv = pmdio;
-
- if (!mdio_register(bus))
- return bus;
-
- printf("No bus with name %s\n", dummy_mdio_name);
- free(bus);
- free(pmdio);
- return NULL;
-}
-
-static inline void do_phy_config(const struct phy_config *phy_config)
-{
- struct mii_dev *bus;
- int i, phy_num, phy_address;
-
- for (i = 0; i < SRDS_MAX_LANES; i++) {
- if (!phy_config[i].dpmacid)
- continue;
-
- for (phy_num = 0;
- phy_num < ARRAY_SIZE(phy_config[i].phy_address);
- phy_num++) {
- phy_address = phy_config[i].phy_address[phy_num];
- if (phy_address == -1)
- break;
- wriop_set_phy_address(phy_config[i].dpmacid,
- phy_num, phy_address);
- }
- /*Register the muxing front-ends to the MDIO buses*/
- bus = lx2160a_qds_mdio_init(phy_config[i].mdio_bus,
- phy_config[i].ioslot);
- if (!bus)
- printf("could not get bus for mdio %d ioslot %d\n",
- phy_config[i].mdio_bus,
- phy_config[i].ioslot);
- else
- wriop_set_mdio(phy_config[i].dpmacid, bus);
- }
-}
-
-static inline void do_dpmac_config(int dpmac, const char *arg_dpmacid,
- char *env_dpmac)
-{
- const char *ret;
- size_t len;
- u8 realbusnum, ioslot;
- struct mii_dev *bus;
- int phy_num;
- char *phystr = "phy00";
-
- /*search phy in dpmac arg*/
- for (phy_num = 0; phy_num < WRIOP_MAX_PHY_NUM; phy_num++) {
- sprintf(phystr, "phy%d", phy_num + 1);
- ret = hwconfig_subarg_f(arg_dpmacid, phystr, &len, env_dpmac);
- if (!ret) {
- /*look for phy instead of phy1*/
- if (!phy_num)
- ret = hwconfig_subarg_f(arg_dpmacid, "phy",
- &len, env_dpmac);
- if (!ret)
- continue;
- }
-
- if (len != 4 || strncmp(ret, "0x", 2))
- printf("invalid phy format in %s variable.\n"
- "specify phy%d for %s in hex format e.g. 0x12\n",
- env_dpmac, phy_num + 1, arg_dpmacid);
- else
- wriop_set_phy_address(dpmac, phy_num,
- hextoul(ret, NULL));
- }
-
- /*search mdio in dpmac arg*/
- ret = hwconfig_subarg_f(arg_dpmacid, "mdio", &len, env_dpmac);
- if (ret)
- realbusnum = *ret - '0';
- else
- realbusnum = EMI_NONE;
-
- if (realbusnum) {
- /*search io in dpmac arg*/
- ret = hwconfig_subarg_f(arg_dpmacid, "io", &len, env_dpmac);
- if (ret)
- ioslot = *ret - '0';
- else
- ioslot = IO_SLOT_NONE;
- /*Register the muxing front-ends to the MDIO buses*/
- bus = lx2160a_qds_mdio_init(realbusnum, ioslot);
- if (!bus)
- printf("could not get bus for mdio %d ioslot %d\n",
- realbusnum, ioslot);
- else
- wriop_set_mdio(dpmac, bus);
- }
-}
-
-#endif
-#endif /* !CONFIG_DM_ETH */
-
int board_eth_init(struct bd_info *bis)
{
-#ifndef CONFIG_DM_ETH
-#if defined(CONFIG_FSL_MC_ENET)
- struct memac_mdio_info mdio_info;
- struct memac_mdio_controller *regs;
- int i;
- const char *ret;
- char *env_dpmac;
- char dpmacid[] = "dpmac00", srds[] = "00_00_00";
- size_t len;
- struct mii_dev *bus;
- const struct phy_config *phy_config;
- struct ccsr_gur *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
- u32 srds_s1, srds_s2, srds_s3;
-
- srds_s1 = in_le32(&gur->rcwsr[28]) &
- FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK;
- srds_s1 >>= FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT;
-
- srds_s2 = in_le32(&gur->rcwsr[28]) &
- FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK;
- srds_s2 >>= FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT;
-
- srds_s3 = in_le32(&gur->rcwsr[28]) &
- FSL_CHASSIS3_RCWSR28_SRDS3_PRTCL_MASK;
- srds_s3 >>= FSL_CHASSIS3_RCWSR28_SRDS3_PRTCL_SHIFT;
-
- sprintf(srds, "%d_%d_%d", srds_s1, srds_s2, srds_s3);
-
- regs = (struct memac_mdio_controller *)CFG_SYS_FSL_WRIOP1_MDIO1;
- mdio_info.regs = regs;
- mdio_info.name = DEFAULT_WRIOP_MDIO1_NAME;
-
- /*Register the EMI 1*/
- fm_memac_mdio_init(bis, &mdio_info);
-
- regs = (struct memac_mdio_controller *)CFG_SYS_FSL_WRIOP1_MDIO2;
- mdio_info.regs = regs;
- mdio_info.name = DEFAULT_WRIOP_MDIO2_NAME;
-
- /*Register the EMI 2*/
- fm_memac_mdio_init(bis, &mdio_info);
-
- /* "dpmac" environment variable can be used after
- * defining "dpmac_override" in hwconfig environment variable.
- */
- if (hwconfig("dpmac_override")) {
- env_dpmac = env_get("dpmac");
- if (env_dpmac) {
- ret = hwconfig_arg_f("srds", &len, env_dpmac);
- if (ret) {
- if (strncmp(ret, srds, strlen(srds))) {
- printf("SERDES configuration changed.\n"
- "previous: %.*s, current: %s.\n"
- "update dpmac variable.\n",
- (int)len, ret, srds);
- }
- } else {
- printf("SERDES configuration not found.\n"
- "Please add srds:%s in dpmac variable\n",
- srds);
- }
-
- for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
- /* Look for dpmac1 to dpmac24(current max) arg
- * in dpmac environment variable
- */
- sprintf(dpmacid, "dpmac%d", i);
- ret = hwconfig_arg_f(dpmacid, &len, env_dpmac);
- if (ret)
- do_dpmac_config(i, dpmacid, env_dpmac);
- }
- } else {
- printf("Warning: environment dpmac not found.\n"
- "DPAA network interfaces may not work\n");
- }
- } else {
- /*Look for phy config for serdes1 in phy config table*/
- phy_config = get_phy_config(srds_s1, serdes1_phy_config,
- ARRAY_SIZE(serdes1_phy_config));
- if (!phy_config) {
- printf("%s WRIOP: Unsupported SerDes1 Protocol %d\n",
- __func__, srds_s1);
- } else {
- do_phy_config(phy_config);
- }
- phy_config = get_phy_config(srds_s2, serdes2_phy_config,
- ARRAY_SIZE(serdes2_phy_config));
- if (!phy_config) {
- printf("%s WRIOP: Unsupported SerDes2 Protocol %d\n",
- __func__, srds_s2);
- } else {
- do_phy_config(phy_config);
- }
- phy_config = get_phy_config(srds_s3, serdes3_phy_config,
- ARRAY_SIZE(serdes3_phy_config));
- if (!phy_config) {
- printf("%s WRIOP: Unsupported SerDes3 Protocol %d\n",
- __func__, srds_s3);
- } else {
- do_phy_config(phy_config);
- }
- }
-
- if (wriop_get_enet_if(WRIOP1_DPMAC17) == PHY_INTERFACE_MODE_RGMII_ID) {
- wriop_set_phy_address(WRIOP1_DPMAC17, 0, RGMII_PHY_ADDR1);
- bus = lx2160a_qds_mdio_init(EMI1, EMI1_RGMII1);
- if (!bus)
- printf("could not get bus for RGMII1\n");
- else
- wriop_set_mdio(WRIOP1_DPMAC17, bus);
- }
-
- if (wriop_get_enet_if(WRIOP1_DPMAC18) == PHY_INTERFACE_MODE_RGMII_ID) {
- wriop_set_phy_address(WRIOP1_DPMAC18, 0, RGMII_PHY_ADDR2);
- bus = lx2160a_qds_mdio_init(EMI1, EMI1_RGMII2);
- if (!bus)
- printf("could not get bus for RGMII2\n");
- else
- wriop_set_mdio(WRIOP1_DPMAC18, bus);
- }
-
- cpu_eth_init(bis);
-#endif /* CONFIG_FMAN_ENET */
-#endif /* !CONFIG_DM_ETH */
-
#ifdef CONFIG_PHY_AQUANTIA
/*
* Export functions to be used by AQ firmware
@@ -586,11 +26,7 @@
gd->jt->miiphy_set_current_dev = miiphy_set_current_dev;
#endif
-#ifdef CONFIG_DM_ETH
return 0;
-#else
- return pci_eth_init(bis);
-#endif
}
#if defined(CONFIG_RESET_PHY_R)
@@ -602,265 +38,10 @@
}
#endif /* CONFIG_RESET_PHY_R */
-#ifndef CONFIG_DM_ETH
-#if defined(CONFIG_FSL_MC_ENET)
-int fdt_fixup_dpmac_phy_handle(void *fdt, int dpmac_id, int node_phandle)
-{
- int offset;
- int ret;
- char dpmac_str[] = "dpmacs@00";
- const char *phy_string;
-
- offset = fdt_path_offset(fdt, "/soc/fsl-mc/dpmacs");
-
- if (offset < 0)
- offset = fdt_path_offset(fdt, "/fsl-mc/dpmacs");
-
- if (offset < 0) {
- printf("dpmacs node not found in device tree\n");
- return offset;
- }
-
- sprintf(dpmac_str, "dpmac@%x", dpmac_id);
- debug("dpmac_str = %s\n", dpmac_str);
-
- offset = fdt_subnode_offset(fdt, offset, dpmac_str);
- if (offset < 0) {
- printf("%s node not found in device tree\n", dpmac_str);
- return offset;
- }
-
- phy_string = fdt_getprop(fdt, offset, "phy-connection-type", NULL);
- if (is_backplane_mode(phy_string)) {
- /* Backplane KR mode: skip fixups */
- printf("Interface %d in backplane KR mode\n", dpmac_id);
- return 0;
- }
-
- ret = fdt_appendprop_cell(fdt, offset, "phy-handle", node_phandle);
- if (ret)
- printf("%d@%s %d\n", __LINE__, __func__, ret);
-
- phy_string = phy_string_for_interface(wriop_get_enet_if(dpmac_id));
- ret = fdt_setprop_string(fdt, offset, "phy-connection-type",
- phy_string);
- if (ret)
- printf("%d@%s %d\n", __LINE__, __func__, ret);
-
- return ret;
-}
-
-int fdt_get_ioslot_offset(void *fdt, struct mii_dev *mii_dev, int fpga_offset)
-{
- char mdio_ioslot_str[] = "mdio@00";
- struct lx2160a_qds_mdio *priv;
- u64 reg;
- u32 phandle;
- int offset, mux_val;
-
- /*Test if the MDIO bus is real mdio bus or muxing front end ?*/
- if (strncmp(mii_dev->name, "LX2160A_QDS_MDIO",
- strlen("LX2160A_QDS_MDIO")))
- return -1;
-
- /*Get the real MDIO bus num and ioslot info from bus's priv data*/
- priv = mii_dev->priv;
-
- debug("real_bus_num = %d, ioslot = %d\n",
- priv->realbusnum, priv->ioslot);
-
- if (priv->realbusnum == EMI1)
- reg = CFG_SYS_FSL_WRIOP1_MDIO1;
- else
- reg = CFG_SYS_FSL_WRIOP1_MDIO2;
-
- offset = fdt_node_offset_by_compat_reg(fdt, "fsl,fman-memac-mdio", reg);
- if (offset < 0) {
- printf("mdio@%llx node not found in device tree\n", reg);
- return offset;
- }
-
- phandle = fdt_get_phandle(fdt, offset);
- phandle = cpu_to_fdt32(phandle);
- offset = fdt_node_offset_by_prop_value(fdt, -1, "mdio-parent-bus",
- &phandle, 4);
- if (offset < 0) {
- printf("mdio-mux-%d node not found in device tree\n",
- priv->realbusnum == EMI1 ? 1 : 2);
- return offset;
- }
-
- mux_val = lx2160a_qds_get_mdio_mux_val(priv->realbusnum, priv->ioslot);
- if (priv->realbusnum == EMI1)
- mux_val >>= BRDCFG4_EMI1SEL_SHIFT;
- else
- mux_val >>= BRDCFG4_EMI2SEL_SHIFT;
- sprintf(mdio_ioslot_str, "mdio@%x", (u8)mux_val);
-
- offset = fdt_subnode_offset(fdt, offset, mdio_ioslot_str);
- if (offset < 0) {
- printf("%s node not found in device tree\n", mdio_ioslot_str);
- return offset;
- }
-
- return offset;
-}
-
-int fdt_create_phy_node(void *fdt, int offset, u8 phyaddr, int *subnodeoffset,
- struct phy_device *phy_dev, int phandle)
-{
- char phy_node_name[] = "ethernet-phy@00";
- char phy_id_compatible_str[] = "ethernet-phy-id0000.0000,";
- int ret;
-
- sprintf(phy_node_name, "ethernet-phy@%x", phyaddr);
- debug("phy_node_name = %s\n", phy_node_name);
-
- *subnodeoffset = fdt_add_subnode(fdt, offset, phy_node_name);
- if (*subnodeoffset <= 0) {
- printf("Could not add subnode %s inside node %s err = %s\n",
- phy_node_name, fdt_get_name(fdt, offset, NULL),
- fdt_strerror(*subnodeoffset));
- return *subnodeoffset;
- }
-
- sprintf(phy_id_compatible_str, "ethernet-phy-id%04x.%04x,",
- phy_dev->phy_id >> 16, phy_dev->phy_id & 0xFFFF);
- debug("phy_id_compatible_str %s\n", phy_id_compatible_str);
-
- ret = fdt_setprop_string(fdt, *subnodeoffset, "compatible",
- phy_id_compatible_str);
- if (ret) {
- printf("%d@%s %d\n", __LINE__, __func__, ret);
- goto out;
- }
-
- if (phy_dev->is_c45) {
- ret = fdt_appendprop_string(fdt, *subnodeoffset, "compatible",
- "ethernet-phy-ieee802.3-c45");
- if (ret) {
- printf("%d@%s %d\n", __LINE__, __func__, ret);
- goto out;
- }
- } else {
- ret = fdt_appendprop_string(fdt, *subnodeoffset, "compatible",
- "ethernet-phy-ieee802.3-c22");
- if (ret) {
- printf("%d@%s %d\n", __LINE__, __func__, ret);
- goto out;
- }
- }
-
- ret = fdt_setprop_cell(fdt, *subnodeoffset, "reg", phyaddr);
- if (ret) {
- printf("%d@%s %d\n", __LINE__, __func__, ret);
- goto out;
- }
-
- ret = fdt_set_phandle(fdt, *subnodeoffset, phandle);
- if (ret) {
- printf("%d@%s %d\n", __LINE__, __func__, ret);
- goto out;
- }
-
-out:
- if (ret)
- fdt_del_node(fdt, *subnodeoffset);
-
- return ret;
-}
-
-int fdt_fixup_board_phy(void *fdt)
-{
- int fpga_offset, offset, subnodeoffset;
- struct mii_dev *mii_dev;
- struct list_head *mii_devs, *entry;
- int ret, dpmac_id, i;
- struct phy_device *phy_dev;
- char ethname[ETH_NAME_LEN];
- phy_interface_t phy_iface;
- uint32_t phandle;
-
- ret = 0;
- /* we know FPGA is connected to i2c0, therefore search path directly,
- * instead of compatible property, as it saves time
- */
- fpga_offset = fdt_path_offset(fdt, "/soc/i2c@2000000/fpga");
-
- if (fpga_offset < 0)
- fpga_offset = fdt_path_offset(fdt, "/i2c@2000000/fpga");
-
- if (fpga_offset < 0) {
- printf("i2c@2000000/fpga node not found in device tree\n");
- return fpga_offset;
- }
-
- ret = fdt_generate_phandle(fdt, &phandle);
- if (ret < 0)
- return ret;
-
- mii_devs = mdio_get_list_head();
-
- list_for_each(entry, mii_devs) {
- mii_dev = list_entry(entry, struct mii_dev, link);
- debug("mii_dev name : %s\n", mii_dev->name);
- offset = fdt_get_ioslot_offset(fdt, mii_dev, fpga_offset);
- if (offset < 0)
- continue;
-
- // Look for phy devices attached to MDIO bus muxing front end
- // and create their entries with compatible being the device id
- for (i = 0; i < PHY_MAX_ADDR; i++) {
- phy_dev = mii_dev->phymap[i];
- if (!phy_dev)
- continue;
-
- // TODO: use sscanf instead of loop
- dpmac_id = WRIOP1_DPMAC1;
- while (dpmac_id < NUM_WRIOP_PORTS) {
- phy_iface = wriop_get_enet_if(dpmac_id);
- snprintf(ethname, ETH_NAME_LEN, "DPMAC%d@%s",
- dpmac_id,
- phy_string_for_interface(phy_iface));
- if (strcmp(ethname, phy_dev->dev->name) == 0)
- break;
- dpmac_id++;
- }
- if (dpmac_id == NUM_WRIOP_PORTS)
- continue;
- ret = fdt_create_phy_node(fdt, offset, i,
- &subnodeoffset,
- phy_dev, phandle);
- if (ret)
- break;
-
- ret = fdt_fixup_dpmac_phy_handle(fdt,
- dpmac_id, phandle);
- if (ret) {
- fdt_del_node(fdt, subnodeoffset);
- break;
- }
- /* calculate offset again as new node addition may have
- * changed offset;
- */
- offset = fdt_get_ioslot_offset(fdt, mii_dev,
- fpga_offset);
- phandle++;
- }
-
- if (ret)
- break;
- }
-
- return ret;
-}
-#endif // CONFIG_FSL_MC_ENET
-#endif
-
-#if defined(CONFIG_DM_ETH) && defined(CONFIG_MULTI_DTB_FIT)
+#if defined(CONFIG_MULTI_DTB_FIT)
-/* Structure to hold SERDES protocols supported in case of
- * CONFIG_DM_ETH enabled (network interfaces are described in the DTS).
+/* Structure to hold SERDES protocols supported (network interfaces are
+ * described in the DTS).
*
* @serdes_block: the index of the SERDES block
* @serdes_protocol: the decimal value of the protocol supported
diff --git a/board/freescale/lx2160a/eth_lx2160ardb.c b/board/freescale/lx2160a/eth_lx2160ardb.c
index 69f3e81..533f606 100644
--- a/board/freescale/lx2160a/eth_lx2160ardb.c
+++ b/board/freescale/lx2160a/eth_lx2160ardb.c
@@ -36,35 +36,3 @@
#endif
}
#endif /* CONFIG_RESET_PHY_R */
-
-int fdt_fixup_board_phy(void *fdt)
-{
- int mdio_offset;
- int ret;
- struct mii_dev *dev;
-
- ret = 0;
-
- dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME);
- if (!get_inphi_phy_id(dev, INPHI_PHY_ADDR1, MDIO_MMD_VEND1)) {
- mdio_offset = fdt_path_offset(fdt, "/soc/mdio@0x8B97000");
-
- if (mdio_offset < 0)
- mdio_offset = fdt_path_offset(fdt, "/mdio@0x8B97000");
-
- if (mdio_offset < 0) {
- printf("mdio@0x8B9700 node not found in dts\n");
- return mdio_offset;
- }
-
- ret = fdt_setprop_string(fdt, mdio_offset, "status",
- "disabled");
- if (ret) {
- printf("Could not set disable mdio@0x8B97000 %s\n",
- fdt_strerror(ret));
- return ret;
- }
- }
-
- return ret;
-}
diff --git a/board/freescale/lx2160a/eth_lx2162aqds.c b/board/freescale/lx2160a/eth_lx2162aqds.c
index 25fee89..805aa70 100644
--- a/board/freescale/lx2160a/eth_lx2162aqds.c
+++ b/board/freescale/lx2160a/eth_lx2162aqds.c
@@ -4,584 +4,15 @@
*
*/
-#include <common.h>
-#include <env.h>
-#include <fdt_support.h>
-#include <hwconfig.h>
-#include <command.h>
-#include <log.h>
-#include <net.h>
-#include <netdev.h>
-#include <malloc.h>
-#include <fsl_mdio.h>
-#include <miiphy.h>
-#include <phy.h>
-#include <fm_eth.h>
+#include <asm/global_data.h>
#include <asm/io.h>
#include <exports.h>
-#include <asm/global_data.h>
-#include <asm/arch/fsl_serdes.h>
#include <fsl-mc/fsl_mc.h>
-#include <fsl-mc/ldpaa_wriop.h>
-#include <linux/libfdt.h>
-
-#include "../common/qixis.h"
DECLARE_GLOBAL_DATA_PTR;
-#ifndef CONFIG_DM_ETH
-#define EMI_NONE 0
-#define EMI1 1 /* Mdio Bus 1 */
-#define EMI2 2 /* Mdio Bus 2 */
-
-#if defined(CONFIG_FSL_MC_ENET)
-enum io_slot {
- IO_SLOT_NONE = 0,
- IO_SLOT_1,
- IO_SLOT_2,
- IO_SLOT_3,
- IO_SLOT_4,
- IO_SLOT_5,
- IO_SLOT_6,
- IO_SLOT_7,
- IO_SLOT_8,
- EMI1_RGMII1,
- EMI1_RGMII2,
- IO_SLOT_MAX
-};
-
-struct lx2162a_qds_mdio {
- enum io_slot ioslot : 4;
- u8 realbusnum : 4;
- struct mii_dev *realbus;
-};
-
-/* structure explaining the phy configuration on 8 lanes of a serdes*/
-struct serdes_phy_config {
- u8 serdes; /* serdes protocol */
- struct phy_config {
- u8 dpmacid;
- /* -1 terminated array */
- int phy_address[WRIOP_MAX_PHY_NUM + 1];
- u8 mdio_bus;
- enum io_slot ioslot;
- } phy_config[SRDS_MAX_LANES];
-};
-
-/* Table defining the phy configuration on 8 lanes of a serdes.
- * Various assumptions have been made while defining this table.
- * e.g. for serdes1 protocol 19 it is being assumed that X-M11-USXGMII
- * card is being used for dpmac 3-4. (X-M12-XFI could also have been used)
- * And also that this card is connected to IO Slot 1 (could have been connected
- * to any of the 8 IO slots (IO slot 1 - IO slot 8)).
- * similarly, it is also being assumed that MDIO 1 is selected on X-M7-40G card
- * used in serdes1 protocol 19 (could have selected MDIO 2)
- * To override these settings "dpmac" environment variable can be used after
- * defining "dpmac_override" in hwconfig environment variable.
- * This table has limited serdes protocol entries. It can be expanded as per
- * requirement.
- */
-/*****************************************************************
- *| SERDES_1 PROTOCOL | IO_SLOT | CARD |
- ******************************************************************
- *| 2 | IO_SLOT_1 | M4-PCIE-SGMII |
- *| 3 | IO_SLOT_1 | M11-USXGMII |
- *| 15 | IO_SLOT_1 | M13-25G |
- *| 17 | IO_SLOT_1 | M13-25G |
- *| 18 | IO_SLOT_1 | M11-USXGMII |
- *| | IO_SLOT_6 | M13-25G |
- *| 20 | IO_SLOT_1 | M7-40G |
- *****************************************************************
- */
-static const struct serdes_phy_config serdes1_phy_config[] = {
- {1, {} },
- {2, {{WRIOP1_DPMAC3, {SGMII_CARD_PORT1_PHY_ADDR, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC4, {SGMII_CARD_PORT2_PHY_ADDR, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC5, {SGMII_CARD_PORT3_PHY_ADDR, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC6, {SGMII_CARD_PORT4_PHY_ADDR, -1},
- EMI1, IO_SLOT_1} } },
- {3, {{WRIOP1_DPMAC3, {AQ_PHY_ADDR1, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC4, {AQ_PHY_ADDR2, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC5, {AQ_PHY_ADDR3, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC6, {AQ_PHY_ADDR4, -1},
- EMI1, IO_SLOT_1} } },
- {15, {{WRIOP1_DPMAC1, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC2, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
- EMI1, IO_SLOT_1} } },
- {17, {{WRIOP1_DPMAC3, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC4, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC5, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC6, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
- EMI1, IO_SLOT_1} } },
- {18, {{WRIOP1_DPMAC3, {AQ_PHY_ADDR1, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC4, {AQ_PHY_ADDR2, -1},
- EMI1, IO_SLOT_1},
- {WRIOP1_DPMAC5, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
- EMI1, IO_SLOT_6},
- {WRIOP1_DPMAC6, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
- EMI1, IO_SLOT_6} } },
- {20, {{WRIOP1_DPMAC1, {CORTINA_PHY_ADDR1, -1},
- EMI1, IO_SLOT_1} } }
-};
-
-/*****************************************************************
- *| SERDES_2 PROTOCOL | IO_SLOT | CARD |
- ******************************************************************
- *| 2 | IO_SLOT_7 | M4-PCIE-SGMII |
- *| | IO_SLOT_8 | M4-PCIE-SGMII |
- *| 3 | IO_SLOT_7 | M4-PCIE-SGMII |
- *| | IO_SLOT_8 | M4-PCIE-SGMII |
- *| 5 | IO_SLOT_7 | M4-PCIE-SGMII |
- *| 10 | IO_SLOT_7 | M4-PCIE-SGMII |
- *| | IO_SLOT_8 | M4-PCIE-SGMII |
- *| 11 | IO_SLOT_7 | M4-PCIE-SGMII |
- *| | IO_SLOT_8 | M4-PCIE-SGMII |
- *| 12 | IO_SLOT_7 | M4-PCIE-SGMII |
- *| | IO_SLOT_8 | M4-PCIE-SGMII |
- ******************************************************************
- */
-static const struct serdes_phy_config serdes2_phy_config[] = {
- {2, {} },
- {3, {} },
- {5, {} },
- {10, {{WRIOP1_DPMAC11, {SGMII_CARD_PORT1_PHY_ADDR, -1},
- EMI1, IO_SLOT_7},
- {WRIOP1_DPMAC12, {SGMII_CARD_PORT2_PHY_ADDR, -1},
- EMI1, IO_SLOT_7},
- {WRIOP1_DPMAC17, {SGMII_CARD_PORT3_PHY_ADDR, -1},
- EMI1, IO_SLOT_7},
- {WRIOP1_DPMAC18, {SGMII_CARD_PORT4_PHY_ADDR, -1},
- EMI1, IO_SLOT_7} } },
- {11, {{WRIOP1_DPMAC12, {SGMII_CARD_PORT2_PHY_ADDR, -1},
- EMI1, IO_SLOT_7},
- {WRIOP1_DPMAC17, {SGMII_CARD_PORT3_PHY_ADDR, -1},
- EMI1, IO_SLOT_7},
- {WRIOP1_DPMAC18, {SGMII_CARD_PORT4_PHY_ADDR, -1},
- EMI1, IO_SLOT_7},
- {WRIOP1_DPMAC16, {SGMII_CARD_PORT2_PHY_ADDR, -1},
- EMI1, IO_SLOT_8},
- {WRIOP1_DPMAC13, {SGMII_CARD_PORT3_PHY_ADDR, -1},
- EMI1, IO_SLOT_8},
- {WRIOP1_DPMAC14, {SGMII_CARD_PORT4_PHY_ADDR, -1},
- EMI1, IO_SLOT_8} } },
- {12, {{WRIOP1_DPMAC11, {SGMII_CARD_PORT1_PHY_ADDR, -1},
- EMI1, IO_SLOT_7},
- {WRIOP1_DPMAC12, {SGMII_CARD_PORT2_PHY_ADDR, -1},
- EMI1, IO_SLOT_7},
- {WRIOP1_DPMAC17, {SGMII_CARD_PORT3_PHY_ADDR, -1},
- EMI1, IO_SLOT_7},
- {WRIOP1_DPMAC18, {SGMII_CARD_PORT4_PHY_ADDR, -1},
- EMI1, IO_SLOT_7} } }
-};
-
-static inline
-const struct phy_config *get_phy_config(u8 serdes,
- const struct serdes_phy_config *table,
- u8 table_size)
-{
- int i;
-
- for (i = 0; i < table_size; i++) {
- if (table[i].serdes == serdes)
- return table[i].phy_config;
- }
-
- return NULL;
-}
-
-/* BRDCFG4 controls EMI routing for the board.
- * Bits Function
- * 7-6 EMI Interface #1 Primary Routing (CFG_MUX1_EMI1) (1.8V):
- * EMI1 00= On-board PHY #1
- * 01= On-board PHY #2
- * 10= (reserved)
- * 11= Slots 1..8 multiplexer and translator.
- * 5-3 EMI Interface #1 Secondary Routing (CFG_MUX2_EMI1) (2.5V):
- * EMI1X 000= Slot #1
- * 001= Slot #2
- * 010= Slot #3
- * 011= Slot #4
- * 100= Slot #5
- * 101= Slot #6
- * 110= Slot #7
- * 111= Slot #8
- * 2-0 EMI Interface #2 Routing (CFG_MUX_EMI2):
- * EMI2 000= Slot #1 (secondary EMI)
- * 001= Slot #2 (secondary EMI)
- * 010= Slot #3 (secondary EMI)
- * 011= Slot #4 (secondary EMI)
- * 100= Slot #5 (secondary EMI)
- * 101= Slot #6 (secondary EMI)
- * 110= Slot #7 (secondary EMI)
- * 111= Slot #8 (secondary EMI)
- */
-static int lx2162a_qds_get_mdio_mux_val(u8 realbusnum, enum io_slot ioslot)
-{
- switch (realbusnum) {
- case EMI1:
- switch (ioslot) {
- case EMI1_RGMII1:
- return 0;
- case EMI1_RGMII2:
- return 0x40;
- default:
- return (((ioslot - 1) << BRDCFG4_EMI1SEL_SHIFT) | 0xC0);
- }
- break;
- case EMI2:
- return ((ioslot - 1) << BRDCFG4_EMI2SEL_SHIFT);
- default:
- return -1;
- }
-}
-
-static void lx2162a_qds_mux_mdio(struct lx2162a_qds_mdio *priv)
-{
- u8 brdcfg4, mux_val, reg;
-
- brdcfg4 = QIXIS_READ(brdcfg[4]);
- reg = brdcfg4;
- mux_val = lx2162a_qds_get_mdio_mux_val(priv->realbusnum, priv->ioslot);
-
- switch (priv->realbusnum) {
- case EMI1:
- brdcfg4 &= ~BRDCFG4_EMI1SEL_MASK;
- brdcfg4 |= mux_val;
- break;
- case EMI2:
- brdcfg4 &= ~BRDCFG4_EMI2SEL_MASK;
- brdcfg4 |= mux_val;
- break;
- }
-
- if (brdcfg4 ^ reg)
- QIXIS_WRITE(brdcfg[4], brdcfg4);
-}
-
-static int lx2162a_qds_mdio_read(struct mii_dev *bus, int addr,
- int devad, int regnum)
-{
- struct lx2162a_qds_mdio *priv = bus->priv;
-
- lx2162a_qds_mux_mdio(priv);
-
- return priv->realbus->read(priv->realbus, addr, devad, regnum);
-}
-
-static int lx2162a_qds_mdio_write(struct mii_dev *bus, int addr, int devad,
- int regnum, u16 value)
-{
- struct lx2162a_qds_mdio *priv = bus->priv;
-
- lx2162a_qds_mux_mdio(priv);
-
- return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
-}
-
-static int lx2162a_qds_mdio_reset(struct mii_dev *bus)
-{
- struct lx2162a_qds_mdio *priv = bus->priv;
-
- return priv->realbus->reset(priv->realbus);
-}
-
-static struct mii_dev *lx2162a_qds_mdio_init(u8 realbusnum, enum io_slot ioslot)
-{
- struct lx2162a_qds_mdio *pmdio;
- struct mii_dev *bus;
- /*should be within MDIO_NAME_LEN*/
- char dummy_mdio_name[] = "LX2162A_QDS_MDIO1_IOSLOT1";
-
- if (realbusnum == EMI2) {
- if (ioslot < IO_SLOT_1 || ioslot > IO_SLOT_8) {
- printf("invalid ioslot %d\n", ioslot);
- return NULL;
- }
- } else if (realbusnum == EMI1) {
- if (ioslot < IO_SLOT_1 || ioslot > EMI1_RGMII2) {
- printf("invalid ioslot %d\n", ioslot);
- return NULL;
- }
- } else {
- printf("not supported real mdio bus %d\n", realbusnum);
- return NULL;
- }
-
- if (ioslot == EMI1_RGMII1)
- strcpy(dummy_mdio_name, "LX2162A_QDS_MDIO1_RGMII1");
- else if (ioslot == EMI1_RGMII2)
- strcpy(dummy_mdio_name, "LX2162A_QDS_MDIO1_RGMII2");
- else
- sprintf(dummy_mdio_name, "LX2162A_QDS_MDIO%d_IOSLOT%d",
- realbusnum, ioslot);
- bus = miiphy_get_dev_by_name(dummy_mdio_name);
-
- if (bus)
- return bus;
-
- bus = mdio_alloc();
- if (!bus) {
- printf("Failed to allocate %s bus\n", dummy_mdio_name);
- return NULL;
- }
-
- pmdio = malloc(sizeof(*pmdio));
- if (!pmdio) {
- printf("Failed to allocate %s private data\n", dummy_mdio_name);
- free(bus);
- return NULL;
- }
-
- switch (realbusnum) {
- case EMI1:
- pmdio->realbus =
- miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME);
- break;
- case EMI2:
- pmdio->realbus =
- miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME);
- break;
- }
-
- if (!pmdio->realbus) {
- printf("No real mdio bus num %d found\n", realbusnum);
- free(bus);
- free(pmdio);
- return NULL;
- }
-
- pmdio->realbusnum = realbusnum;
- pmdio->ioslot = ioslot;
- bus->read = lx2162a_qds_mdio_read;
- bus->write = lx2162a_qds_mdio_write;
- bus->reset = lx2162a_qds_mdio_reset;
- strcpy(bus->name, dummy_mdio_name);
- bus->priv = pmdio;
-
- if (!mdio_register(bus))
- return bus;
-
- printf("No bus with name %s\n", dummy_mdio_name);
- free(bus);
- free(pmdio);
- return NULL;
-}
-
-static inline void do_phy_config(const struct phy_config *phy_config)
-{
- struct mii_dev *bus;
- int i, phy_num, phy_address;
-
- for (i = 0; i < SRDS_MAX_LANES; i++) {
- if (!phy_config[i].dpmacid)
- continue;
-
- for (phy_num = 0;
- phy_num < ARRAY_SIZE(phy_config[i].phy_address);
- phy_num++) {
- phy_address = phy_config[i].phy_address[phy_num];
- if (phy_address == -1)
- break;
- wriop_set_phy_address(phy_config[i].dpmacid,
- phy_num, phy_address);
- }
- /*Register the muxing front-ends to the MDIO buses*/
- bus = lx2162a_qds_mdio_init(phy_config[i].mdio_bus,
- phy_config[i].ioslot);
- if (!bus)
- printf("could not get bus for mdio %d ioslot %d\n",
- phy_config[i].mdio_bus,
- phy_config[i].ioslot);
- else
- wriop_set_mdio(phy_config[i].dpmacid, bus);
- }
-}
-
-static inline void do_dpmac_config(int dpmac, const char *arg_dpmacid,
- char *env_dpmac)
-{
- const char *ret;
- size_t len;
- u8 realbusnum, ioslot;
- struct mii_dev *bus;
- int phy_num;
- char *phystr = "phy00";
-
- /*search phy in dpmac arg*/
- for (phy_num = 0; phy_num < WRIOP_MAX_PHY_NUM; phy_num++) {
- sprintf(phystr, "phy%d", phy_num + 1);
- ret = hwconfig_subarg_f(arg_dpmacid, phystr, &len, env_dpmac);
- if (!ret) {
- /*look for phy instead of phy1*/
- if (!phy_num)
- ret = hwconfig_subarg_f(arg_dpmacid, "phy",
- &len, env_dpmac);
- if (!ret)
- continue;
- }
-
- if (len != 4 || strncmp(ret, "0x", 2))
- printf("invalid phy format in %s variable.\n"
- "specify phy%d for %s in hex format e.g. 0x12\n",
- env_dpmac, phy_num + 1, arg_dpmacid);
- else
- wriop_set_phy_address(dpmac, phy_num,
- hextoul(ret, NULL));
- }
-
- /*search mdio in dpmac arg*/
- ret = hwconfig_subarg_f(arg_dpmacid, "mdio", &len, env_dpmac);
- if (ret)
- realbusnum = *ret - '0';
- else
- realbusnum = EMI_NONE;
-
- if (realbusnum) {
- /*search io in dpmac arg*/
- ret = hwconfig_subarg_f(arg_dpmacid, "io", &len, env_dpmac);
- if (ret)
- ioslot = *ret - '0';
- else
- ioslot = IO_SLOT_NONE;
- /*Register the muxing front-ends to the MDIO buses*/
- bus = lx2162a_qds_mdio_init(realbusnum, ioslot);
- if (!bus)
- printf("could not get bus for mdio %d ioslot %d\n",
- realbusnum, ioslot);
- else
- wriop_set_mdio(dpmac, bus);
- }
-}
-
-#endif
-#endif /* !CONFIG_DM_ETH */
-
int board_eth_init(struct bd_info *bis)
{
-#ifndef CONFIG_DM_ETH
-#if defined(CONFIG_FSL_MC_ENET)
- struct memac_mdio_info mdio_info;
- struct memac_mdio_controller *regs;
- int i;
- const char *ret;
- char *env_dpmac;
- char dpmacid[] = "dpmac00", srds[] = "00_00_00";
- size_t len;
- struct mii_dev *bus;
- const struct phy_config *phy_config;
- struct ccsr_gur *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
- u32 srds_s1, srds_s2;
-
- srds_s1 = in_le32(&gur->rcwsr[28]) &
- FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK;
- srds_s1 >>= FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT;
-
- srds_s2 = in_le32(&gur->rcwsr[28]) &
- FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK;
- srds_s2 >>= FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT;
-
- sprintf(srds, "%d_%d", srds_s1, srds_s2);
-
- regs = (struct memac_mdio_controller *)CFG_SYS_FSL_WRIOP1_MDIO1;
- mdio_info.regs = regs;
- mdio_info.name = DEFAULT_WRIOP_MDIO1_NAME;
-
- /*Register the EMI 1*/
- fm_memac_mdio_init(bis, &mdio_info);
-
- regs = (struct memac_mdio_controller *)CFG_SYS_FSL_WRIOP1_MDIO2;
- mdio_info.regs = regs;
- mdio_info.name = DEFAULT_WRIOP_MDIO2_NAME;
-
- /*Register the EMI 2*/
- fm_memac_mdio_init(bis, &mdio_info);
-
- /* "dpmac" environment variable can be used after
- * defining "dpmac_override" in hwconfig environment variable.
- */
- if (hwconfig("dpmac_override")) {
- env_dpmac = env_get("dpmac");
- if (env_dpmac) {
- ret = hwconfig_arg_f("srds", &len, env_dpmac);
- if (ret) {
- if (strncmp(ret, srds, strlen(srds))) {
- printf("SERDES configuration changed.\n"
- "previous: %.*s, current: %s.\n"
- "update dpmac variable.\n",
- (int)len, ret, srds);
- }
- } else {
- printf("SERDES configuration not found.\n"
- "Please add srds:%s in dpmac variable\n",
- srds);
- }
-
- for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
- /* Look for dpmac1 to dpmac24(current max) arg
- * in dpmac environment variable
- */
- sprintf(dpmacid, "dpmac%d", i);
- ret = hwconfig_arg_f(dpmacid, &len, env_dpmac);
- if (ret)
- do_dpmac_config(i, dpmacid, env_dpmac);
- }
- } else {
- printf("Warning: environment dpmac not found.\n"
- "DPAA network interfaces may not work\n");
- }
- } else {
- /*Look for phy config for serdes1 in phy config table*/
- phy_config = get_phy_config(srds_s1, serdes1_phy_config,
- ARRAY_SIZE(serdes1_phy_config));
- if (!phy_config) {
- printf("%s WRIOP: Unsupported SerDes1 Protocol %d\n",
- __func__, srds_s1);
- } else {
- do_phy_config(phy_config);
- }
- phy_config = get_phy_config(srds_s2, serdes2_phy_config,
- ARRAY_SIZE(serdes2_phy_config));
- if (!phy_config) {
- printf("%s WRIOP: Unsupported SerDes2 Protocol %d\n",
- __func__, srds_s2);
- } else {
- do_phy_config(phy_config);
- }
- }
-
- if (wriop_get_enet_if(WRIOP1_DPMAC17) == PHY_INTERFACE_MODE_RGMII_ID) {
- wriop_set_phy_address(WRIOP1_DPMAC17, 0, RGMII_PHY_ADDR1);
- bus = lx2162a_qds_mdio_init(EMI1, EMI1_RGMII1);
- if (!bus)
- printf("could not get bus for RGMII1\n");
- else
- wriop_set_mdio(WRIOP1_DPMAC17, bus);
- }
-
- if (wriop_get_enet_if(WRIOP1_DPMAC18) == PHY_INTERFACE_MODE_RGMII_ID) {
- wriop_set_phy_address(WRIOP1_DPMAC18, 0, RGMII_PHY_ADDR2);
- bus = lx2162a_qds_mdio_init(EMI1, EMI1_RGMII2);
- if (!bus)
- printf("could not get bus for RGMII2\n");
- else
- wriop_set_mdio(WRIOP1_DPMAC18, bus);
- }
-
- cpu_eth_init(bis);
-#endif /* CONFIG_FMAN_ENET */
-#endif /* !CONFIG_DM_ETH */
-
#ifdef CONFIG_PHY_AQUANTIA
/*
* Export functions to be used by AQ firmware
@@ -595,11 +26,7 @@
gd->jt->miiphy_set_current_dev = miiphy_set_current_dev;
#endif
-#ifdef CONFIG_DM_ETH
return 0;
-#else
- return pci_eth_init(bis);
-#endif
}
#if defined(CONFIG_RESET_PHY_R)
@@ -611,273 +38,10 @@
}
#endif /* CONFIG_RESET_PHY_R */
-#ifndef CONFIG_DM_ETH
-#if defined(CONFIG_FSL_MC_ENET)
-int fdt_fixup_dpmac_phy_handle(void *fdt, int dpmac_id, int node_phandle)
-{
- int offset;
- int ret;
- char dpmac_str[] = "dpmacs@00";
- const char *phy_string;
-
- offset = fdt_path_offset(fdt, "/soc/fsl-mc/dpmacs");
-
- if (offset < 0)
- offset = fdt_path_offset(fdt, "/fsl-mc/dpmacs");
-
- if (offset < 0) {
- printf("dpmacs node not found in device tree\n");
- return offset;
- }
-
- sprintf(dpmac_str, "dpmac@%x", dpmac_id);
- debug("dpmac_str = %s\n", dpmac_str);
-
- offset = fdt_subnode_offset(fdt, offset, dpmac_str);
- if (offset < 0) {
- printf("%s node not found in device tree\n", dpmac_str);
- return offset;
- }
-
- phy_string = fdt_getprop(fdt, offset, "phy-connection-type", NULL);
- if (is_backplane_mode(phy_string)) {
- /* Backplane KR mode: skip fixups */
- printf("Interface %d in backplane KR mode\n", dpmac_id);
- return 0;
- }
-
- ret = fdt_appendprop_cell(fdt, offset, "phy-handle", node_phandle);
- if (ret)
- printf("%d@%s %d\n", __LINE__, __func__, ret);
-
- phy_string = phy_string_for_interface(wriop_get_enet_if(dpmac_id));
- ret = fdt_setprop_string(fdt, offset, "phy-connection-type",
- phy_string);
- if (ret)
- printf("%d@%s %d\n", __LINE__, __func__, ret);
-
- return ret;
-}
-
-int fdt_get_ioslot_offset(void *fdt, struct mii_dev *mii_dev, int fpga_offset)
-{
- char mdio_ioslot_str[] = "mdio@00";
- struct lx2162a_qds_mdio *priv;
- u64 reg;
- u32 phandle;
- int offset, mux_val;
-
- /*Test if the MDIO bus is real mdio bus or muxing front end ?*/
- if (strncmp(mii_dev->name, "LX2162A_QDS_MDIO",
- strlen("LX2162A_QDS_MDIO")))
- return -1;
-
- /*Get the real MDIO bus num and ioslot info from bus's priv data*/
- priv = mii_dev->priv;
-
- debug("real_bus_num = %d, ioslot = %d\n",
- priv->realbusnum, priv->ioslot);
-
- if (priv->realbusnum == EMI1)
- reg = CFG_SYS_FSL_WRIOP1_MDIO1;
- else
- reg = CFG_SYS_FSL_WRIOP1_MDIO2;
-
- offset = fdt_node_offset_by_compat_reg(fdt, "fsl,fman-memac-mdio", reg);
- if (offset < 0) {
- printf("mdio@%llx node not found in device tree\n", reg);
- return offset;
- }
-
- phandle = fdt_get_phandle(fdt, offset);
- phandle = cpu_to_fdt32(phandle);
- offset = fdt_node_offset_by_prop_value(fdt, -1, "mdio-parent-bus",
- &phandle, 4);
- if (offset < 0) {
- printf("mdio-mux-%d node not found in device tree\n",
- priv->realbusnum == EMI1 ? 1 : 2);
- return offset;
- }
-
- mux_val = lx2162a_qds_get_mdio_mux_val(priv->realbusnum, priv->ioslot);
- if (priv->realbusnum == EMI1)
- mux_val >>= BRDCFG4_EMI1SEL_SHIFT;
- else
- mux_val >>= BRDCFG4_EMI2SEL_SHIFT;
- sprintf(mdio_ioslot_str, "mdio@%x", (u8)mux_val);
-
- offset = fdt_subnode_offset(fdt, offset, mdio_ioslot_str);
- if (offset < 0) {
- printf("%s node not found in device tree\n", mdio_ioslot_str);
- return offset;
- }
-
- return offset;
-}
-
-int fdt_create_phy_node(void *fdt, int offset, u8 phyaddr, int *subnodeoffset,
- struct phy_device *phy_dev, int phandle)
-{
- char phy_node_name[] = "ethernet-phy@00";
- char phy_id_compatible_str[] = "ethernet-phy-id0000.0000,";
- int ret;
-
- sprintf(phy_node_name, "ethernet-phy@%x", phyaddr);
- debug("phy_node_name = %s\n", phy_node_name);
-
- *subnodeoffset = fdt_add_subnode(fdt, offset, phy_node_name);
- if (*subnodeoffset <= 0) {
- printf("Could not add subnode %s inside node %s err = %s\n",
- phy_node_name, fdt_get_name(fdt, offset, NULL),
- fdt_strerror(*subnodeoffset));
- return *subnodeoffset;
- }
-
- sprintf(phy_id_compatible_str, "ethernet-phy-id%04x.%04x,",
- phy_dev->phy_id >> 16, phy_dev->phy_id & 0xFFFF);
- debug("phy_id_compatible_str %s\n", phy_id_compatible_str);
-
- ret = fdt_setprop_string(fdt, *subnodeoffset, "compatible",
- phy_id_compatible_str);
- if (ret) {
- printf("%d@%s %d\n", __LINE__, __func__, ret);
- goto out;
- }
-
- if (phy_dev->is_c45) {
- ret = fdt_appendprop_string(fdt, *subnodeoffset, "compatible",
- "ethernet-phy-ieee802.3-c45");
- if (ret) {
- printf("%d@%s %d\n", __LINE__, __func__, ret);
- goto out;
- }
- } else {
- ret = fdt_appendprop_string(fdt, *subnodeoffset, "compatible",
- "ethernet-phy-ieee802.3-c22");
- if (ret) {
- printf("%d@%s %d\n", __LINE__, __func__, ret);
- goto out;
- }
- }
-
- ret = fdt_setprop_cell(fdt, *subnodeoffset, "reg", phyaddr);
- if (ret) {
- printf("%d@%s %d\n", __LINE__, __func__, ret);
- goto out;
- }
-
- ret = fdt_set_phandle(fdt, *subnodeoffset, phandle);
- if (ret) {
- printf("%d@%s %d\n", __LINE__, __func__, ret);
- goto out;
- }
-
-out:
- if (ret)
- fdt_del_node(fdt, *subnodeoffset);
-
- return ret;
-}
-
-#define is_rgmii(dpmac_id) \
- wriop_get_enet_if((dpmac_id)) == PHY_INTERFACE_MODE_RGMII_ID
-
-int fdt_fixup_board_phy(void *fdt)
-{
- int fpga_offset, offset, subnodeoffset;
- struct mii_dev *mii_dev;
- struct list_head *mii_devs, *entry;
- int ret, dpmac_id, i;
- struct phy_device *phy_dev;
- char ethname[ETH_NAME_LEN];
- phy_interface_t phy_iface;
- uint32_t phandle;
-
- ret = 0;
- /* we know FPGA is connected to i2c0, therefore search path directly,
- * instead of compatible property, as it saves time
- */
- fpga_offset = fdt_path_offset(fdt, "/soc/i2c@2000000/fpga");
-
- if (fpga_offset < 0)
- fpga_offset = fdt_path_offset(fdt, "/i2c@2000000/fpga");
-
- if (fpga_offset < 0) {
- printf("i2c@2000000/fpga node not found in device tree\n");
- return fpga_offset;
- }
-
- ret = fdt_generate_phandle(fdt, &phandle);
- if (ret < 0)
- return ret;
-
- mii_devs = mdio_get_list_head();
-
- list_for_each(entry, mii_devs) {
- mii_dev = list_entry(entry, struct mii_dev, link);
- debug("mii_dev name : %s\n", mii_dev->name);
- offset = fdt_get_ioslot_offset(fdt, mii_dev, fpga_offset);
- if (offset < 0)
- continue;
-
- // Look for phy devices attached to MDIO bus muxing front end
- // and create their entries with compatible being the device id
- for (i = 0; i < PHY_MAX_ADDR; i++) {
- phy_dev = mii_dev->phymap[i];
- if (!phy_dev)
- continue;
-
- // TODO: use sscanf instead of loop
- dpmac_id = WRIOP1_DPMAC1;
- while (dpmac_id < NUM_WRIOP_PORTS) {
- phy_iface = wriop_get_enet_if(dpmac_id);
- snprintf(ethname, ETH_NAME_LEN, "DPMAC%d@%s",
- dpmac_id,
- phy_string_for_interface(phy_iface));
- if (strcmp(ethname, phy_dev->dev->name) == 0)
- break;
- dpmac_id++;
- }
- if (dpmac_id == NUM_WRIOP_PORTS)
- continue;
-
- if ((dpmac_id == 17 || dpmac_id == 18) &&
- is_rgmii(dpmac_id))
- continue;
-
- ret = fdt_create_phy_node(fdt, offset, i,
- &subnodeoffset,
- phy_dev, phandle);
- if (ret)
- break;
-
- ret = fdt_fixup_dpmac_phy_handle(fdt,
- dpmac_id, phandle);
- if (ret) {
- fdt_del_node(fdt, subnodeoffset);
- break;
- }
- /* calculate offset again as new node addition may have
- * changed offset;
- */
- offset = fdt_get_ioslot_offset(fdt, mii_dev,
- fpga_offset);
- phandle++;
- }
-
- if (ret)
- break;
- }
-
- return ret;
-}
-#endif // CONFIG_FSL_MC_ENET
-#endif
-
-#if defined(CONFIG_DM_ETH) && defined(CONFIG_MULTI_DTB_FIT)
+#if defined(CONFIG_MULTI_DTB_FIT)
-/* Structure to hold SERDES protocols supported in case of
- * CONFIG_DM_ETH enabled (network interfaces are described in the DTS).
+/* Structure to hold SERDES protocols supported (network interfaces are
+ * described in the DTS).
*
* @serdes_block: the index of the SERDES block
* @serdes_protocol: the decimal value of the protocol supported
diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c
index d8a86cd..33842d0 100644
--- a/board/freescale/lx2160a/lx2160a.c
+++ b/board/freescale/lx2160a/lx2160a.c
@@ -572,7 +572,7 @@
out_le32(irq_ccsr + IRQCR_OFFSET / 4, AQR107_IRQ_MASK);
#endif
-#if !defined(CONFIG_SYS_EARLY_PCI_INIT) && defined(CONFIG_DM_ETH)
+#if !defined(CONFIG_SYS_EARLY_PCI_INIT)
pci_init();
#endif
return 0;
@@ -642,7 +642,6 @@
#endif
#ifdef CONFIG_FSL_MC_ENET
-extern int fdt_fixup_board_phy(void *fdt);
void fdt_fixup_board_enet(void *fdt)
{
@@ -662,9 +661,6 @@
if (get_mc_boot_status() == 0 &&
(is_lazy_dpl_addr_valid() || get_dpl_apply_status() == 0)) {
fdt_status_okay(fdt, offset);
-#ifndef CONFIG_DM_ETH
- fdt_fixup_board_phy(fdt);
-#endif
} else {
fdt_status_fail(fdt, offset);
}