board: omapl138_lcdk: add the mmc device to SPL
We don't have full device-tree support in SPL yet - add an appropriate
U_BOOT_DEVICE() to the board file.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index adc5092..8a81c07 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -14,6 +14,7 @@
bool "OMAPL138 LCDK"
select SOC_DA8XX
select SUPPORT_SPL
+ select SPL_BOARD_INIT
config TARGET_LEGOEV3
bool "LEGO MINDSTORMS EV3"
diff --git a/board/davinci/da8xxevm/omapl138_lcdk.c b/board/davinci/da8xxevm/omapl138_lcdk.c
index d4cda0a..608a7f2 100644
--- a/board/davinci/da8xxevm/omapl138_lcdk.c
+++ b/board/davinci/da8xxevm/omapl138_lcdk.c
@@ -366,4 +366,13 @@
.name = "ns16550_serial",
.platdata = &serial_pdata,
};
+
+U_BOOT_DEVICE(omapl138_mmc) = {
+ .name = "davinci_mmc",
+};
+
+void spl_board_init(void)
+{
+ davinci_configure_pin_mux(mmc0_pins, ARRAY_SIZE(mmc0_pins));
+}
#endif