arm: dra7xx: Add control module changes
Control module register addresses are changed from OMAP5
to DRA7XX socs.
So adding the necessary changes for the same.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: R Sricharan <r.sricharan@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index b82205a..7f1808c 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -550,6 +550,7 @@
*prcm = &omap5_es1_prcm;
*dplls_data = &omap5_dplls_es1;
*omap_vcores = &omap5430_volts;
+ *ctrl = &omap5_ctrl;
break;
case OMAP5430_ES2_0:
@@ -557,19 +558,19 @@
*prcm = &omap5_es2_prcm;
*dplls_data = &omap5_dplls_es2;
*omap_vcores = &omap5430_volts_es2;
+ *ctrl = &omap5_ctrl;
break;
case DRA752_ES1_0:
*prcm = &dra7xx_prcm;
*dplls_data = &dra7xx_dplls;
*omap_vcores = &omap5430_volts_es2;
+ *ctrl = &dra7xx_ctrl;
break;
default:
printf("\n INVALID OMAP REVISION ");
}
-
- *ctrl = &omap5_ctrl;
}
void get_ioregs(const struct ctrl_ioregs **regs)
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index ade9875..b8a61fe 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -383,6 +383,78 @@
.control_efuse_13 = 0x4AE0CDF8,
};
+struct omap_sys_ctrl_regs const dra7xx_ctrl = {
+ .control_status = 0x4A002134,
+ .control_core_mmr_lock1 = 0x4A002540,
+ .control_core_mmr_lock2 = 0x4A002544,
+ .control_core_mmr_lock3 = 0x4A002548,
+ .control_core_mmr_lock4 = 0x4A00254C,
+ .control_core_mmr_lock5 = 0x4A002550,
+ .control_core_control_io1 = 0x4A002554,
+ .control_core_control_io2 = 0x4A002558,
+ .control_paconf_global = 0x4A002DA0,
+ .control_paconf_mode = 0x4A002DA4,
+ .control_smart1io_padconf_0 = 0x4A002DA8,
+ .control_smart1io_padconf_1 = 0x4A002DAC,
+ .control_smart1io_padconf_2 = 0x4A002DB0,
+ .control_smart2io_padconf_0 = 0x4A002DB4,
+ .control_smart2io_padconf_1 = 0x4A002DB8,
+ .control_smart2io_padconf_2 = 0x4A002DBC,
+ .control_smart3io_padconf_0 = 0x4A002DC0,
+ .control_smart3io_padconf_1 = 0x4A002DC4,
+ .control_pbias = 0x4A002E00,
+ .control_i2c_0 = 0x4A002E04,
+ .control_camera_rx = 0x4A002E08,
+ .control_hdmi_tx_phy = 0x4A002E0C,
+ .control_uniportm = 0x4A002E10,
+ .control_dsiphy = 0x4A002E14,
+ .control_mcbsplp = 0x4A002E18,
+ .control_usb2phycore = 0x4A002E1C,
+ .control_hdmi_1 = 0x4A002E20,
+ .control_hsi = 0x4A002E24,
+ .control_ddr3ch1_0 = 0x4A002E30,
+ .control_ddr3ch2_0 = 0x4A002E34,
+ .control_ddrch1_0 = 0x4A002E38,
+ .control_ddrch1_1 = 0x4A002E3C,
+ .control_ddrch2_0 = 0x4A002E40,
+ .control_ddrch2_1 = 0x4A002E44,
+ .control_lpddr2ch1_0 = 0x4A002E48,
+ .control_lpddr2ch1_1 = 0x4A002E4C,
+ .control_ddrio_0 = 0x4A002E50,
+ .control_ddrio_1 = 0x4A002E54,
+ .control_ddrio_2 = 0x4A002E58,
+ .control_hyst_1 = 0x4A002E5C,
+ .control_usbb_hsic_control = 0x4A002E60,
+ .control_c2c = 0x4A002E64,
+ .control_core_control_spare_rw = 0x4A002E68,
+ .control_core_control_spare_r = 0x4A002E6C,
+ .control_core_control_spare_r_c0 = 0x4A002E70,
+ .control_srcomp_north_side = 0x4A002E74,
+ .control_srcomp_south_side = 0x4A002E78,
+ .control_srcomp_east_side = 0x4A002E7C,
+ .control_srcomp_west_side = 0x4A002E80,
+ .control_srcomp_code_latch = 0x4A002E84,
+ .control_padconf_core_base = 0x4A003400,
+ .control_port_emif1_sdram_config = 0x4AE0C110,
+ .control_port_emif1_lpddr2_nvm_config = 0x4AE0C114,
+ .control_port_emif2_sdram_config = 0x4AE0C118,
+ .control_emif1_sdram_config_ext = 0x4AE0C144,
+ .control_emif2_sdram_config_ext = 0x4AE0C148,
+ .control_padconf_mode = 0x4AE0C5A0,
+ .control_xtal_oscillator = 0x4AE0C5A4,
+ .control_i2c_2 = 0x4AE0C5A8,
+ .control_ckobuffer = 0x4AE0C5AC,
+ .control_wkup_control_spare_rw = 0x4AE0C5B0,
+ .control_wkup_control_spare_r = 0x4AE0C5B4,
+ .control_wkup_control_spare_r_c0 = 0x4AE0C5B8,
+ .control_srcomp_east_side_wkup = 0x4AE0C5BC,
+ .control_efuse_1 = 0x4AE0C5C0,
+ .control_efuse_2 = 0x4AE0C5C4,
+ .control_efuse_3 = 0x4AE0C5C8,
+ .control_efuse_4 = 0x4AE0C5CC,
+ .control_efuse_13 = 0x4AE0C5F0,
+};
+
struct prcm_regs const omap5_es2_prcm = {
/* cm1.ckgen */
.cm_clksel_core = 0x4a004100,
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 59bfabc..eeed163 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -347,11 +347,19 @@
struct omap_sys_ctrl_regs {
u32 control_status;
+ u32 control_core_mmr_lock1;
+ u32 control_core_mmr_lock2;
+ u32 control_core_mmr_lock3;
+ u32 control_core_mmr_lock4;
+ u32 control_core_mmr_lock5;
+ u32 control_core_control_io1;
+ u32 control_core_control_io2;
u32 control_id_code;
u32 control_std_fuse_opp_bgap;
u32 control_ldosram_iva_voltage_ctrl;
u32 control_ldosram_mpu_voltage_ctrl;
u32 control_ldosram_core_voltage_ctrl;
+ u32 control_padconf_core_base;
u32 control_paconf_global;
u32 control_paconf_mode;
u32 control_smart1io_padconf_0;
@@ -431,6 +439,7 @@
u32 control_efuse_11;
u32 control_efuse_12;
u32 control_efuse_13;
+ u32 control_padconf_wkup_base;
};
struct dpll_params {
@@ -507,6 +516,7 @@
extern struct omap_sys_ctrl_regs const **ctrl;
extern struct omap_sys_ctrl_regs const omap4_ctrl;
extern struct omap_sys_ctrl_regs const omap5_ctrl;
+extern struct omap_sys_ctrl_regs const dra7xx_ctrl;
void hw_data_init(void);