net: phy: motorcomm: Add support for YT8511 PHY
The YT8511 ethernet PHYs can be found on e.g. the SOQuartz or
the Quartz64. Add rudimentary support for them.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c
index e822fd7..8635a96 100644
--- a/drivers/net/phy/motorcomm.c
+++ b/drivers/net/phy/motorcomm.c
@@ -11,6 +11,7 @@
#include <phy.h>
#include <linux/bitfield.h>
+#define PHY_ID_YT8511 0x0000010a
#define PHY_ID_YT8531 0x4f51e91b
#define PHY_ID_MASK GENMASK(31, 0)
@@ -26,6 +27,31 @@
#define YTPHY_DTS_OUTPUT_CLK_25M 25000000
#define YTPHY_DTS_OUTPUT_CLK_125M 125000000
+#define YT8511_EXT_CLK_GATE 0x0c
+#define YT8511_EXT_DELAY_DRIVE 0x0d
+#define YT8511_EXT_SLEEP_CTRL 0x27
+
+/* 2b00 25m from pll
+ * 2b01 25m from xtl *default*
+ * 2b10 62.m from pll
+ * 2b11 125m from pll
+ */
+#define YT8511_CLK_125M (BIT(2) | BIT(1))
+#define YT8511_PLLON_SLP BIT(14)
+
+/* RX Delay enabled = 1.8ns 1000T, 8ns 10/100T */
+#define YT8511_DELAY_RX BIT(0)
+
+/* TX Gig-E Delay is bits 7:4, default 0x5
+ * TX Fast-E Delay is bits 15:12, default 0xf
+ * Delay = 150ps * N - 250ps
+ * On = 2000ps, off = 50ps
+ */
+#define YT8511_DELAY_GE_TX_EN (0xf << 4)
+#define YT8511_DELAY_GE_TX_DIS (0x2 << 4)
+#define YT8511_DELAY_FE_TX_EN (0xf << 12)
+#define YT8511_DELAY_FE_TX_DIS (0x2 << 12)
+
#define YT8531_SCR_SYNCE_ENABLE BIT(6)
/* 1b0 output 25m clock *default*
* 1b1 output 125m clock
@@ -347,6 +373,58 @@
priv->flag |= TX_CLK_1000_INVERTED;
}
+static int yt8511_config(struct phy_device *phydev)
+{
+ u32 ge, fe;
+ int ret;
+
+ ret = genphy_config_aneg(phydev);
+ if (ret < 0)
+ return ret;
+
+ switch (phydev->interface) {
+ case PHY_INTERFACE_MODE_RGMII:
+ ge = YT8511_DELAY_GE_TX_DIS;
+ fe = YT8511_DELAY_FE_TX_DIS;
+ break;
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ ge = YT8511_DELAY_RX | YT8511_DELAY_GE_TX_DIS;
+ fe = YT8511_DELAY_FE_TX_DIS;
+ break;
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ ge = YT8511_DELAY_GE_TX_EN;
+ fe = YT8511_DELAY_FE_TX_EN;
+ break;
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ ge = YT8511_DELAY_RX | YT8511_DELAY_GE_TX_EN;
+ fe = YT8511_DELAY_FE_TX_EN;
+ break;
+ default: /* do not support other modes */
+ return -EOPNOTSUPP;
+ }
+
+ ret = ytphy_modify_ext(phydev, YT8511_EXT_CLK_GATE,
+ (YT8511_DELAY_RX | YT8511_DELAY_GE_TX_EN), ge);
+ if (ret < 0)
+ return ret;
+ /* set clock mode to 125m */
+ ret = ytphy_modify_ext(phydev, YT8511_EXT_CLK_GATE,
+ YT8511_CLK_125M, YT8511_CLK_125M);
+ if (ret < 0)
+ return ret;
+ ret = ytphy_modify_ext(phydev, YT8511_EXT_DELAY_DRIVE,
+ YT8511_DELAY_FE_TX_EN, fe);
+ if (ret < 0)
+ return ret;
+ /* sleep control, disable PLL in sleep for now */
+ ret = ytphy_modify_ext(phydev, YT8511_EXT_SLEEP_CTRL, YT8511_PLLON_SLP,
+ 0);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
static int yt8531_config(struct phy_device *phydev)
{
struct ytphy_plat_priv *priv = phydev->priv;
@@ -425,6 +503,16 @@
return 0;
}
+U_BOOT_PHY_DRIVER(motorcomm8511) = {
+ .name = "YT8511 Gigabit Ethernet",
+ .uid = PHY_ID_YT8511,
+ .mask = PHY_ID_MASK,
+ .features = PHY_GBIT_FEATURES,
+ .config = &yt8511_config,
+ .startup = &genphy_startup,
+ .shutdown = &genphy_shutdown,
+};
+
U_BOOT_PHY_DRIVER(motorcomm8531) = {
.name = "YT8531 Gigabit Ethernet",
.uid = PHY_ID_YT8531,