cros_ec: Clean up multiple EC protocol support
Version 1 protocols (without command version) were already no longer
supported in cros_ec.c. This removes some dead code from the
cros_ec_i2c driver.
Version 2 protcols (with command version) are now called
protocol_version=2, instead of cmd_version_is_supported=1.
A subsequent change will introduce protocol version 3 for SPI.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/drivers/misc/cros_ec_i2c.c b/drivers/misc/cros_ec_i2c.c
index 0fbab99..513cdb1 100644
--- a/drivers/misc/cros_ec_i2c.c
+++ b/drivers/misc/cros_ec_i2c.c
@@ -35,7 +35,7 @@
uint8_t *ptr;
/* Receive input data, so that args will be dword aligned */
uint8_t *in_ptr;
- int ret;
+ int len, csum, ret;
old_bus = i2c_get_bus_num();
@@ -67,24 +67,24 @@
* will be dword aligned.
*/
in_ptr = dev->din + sizeof(int64_t);
- if (!dev->cmd_version_is_supported) {
- /* Send an old-style command */
- *ptr++ = cmd;
- out_bytes = dout_len + 1;
- in_bytes = din_len + 2;
- in_ptr--; /* Expect just a status byte */
- } else {
- *ptr++ = EC_CMD_VERSION0 + cmd_version;
- *ptr++ = cmd;
- *ptr++ = dout_len;
- in_ptr -= 2; /* Expect status, length bytes */
+
+ if (dev->protocol_version != 2) {
+ /* Something we don't support */
+ debug("%s: Protocol version %d unsupported\n",
+ __func__, dev->protocol_version);
+ return -1;
}
+
+ *ptr++ = EC_CMD_VERSION0 + cmd_version;
+ *ptr++ = cmd;
+ *ptr++ = dout_len;
+ in_ptr -= 2; /* Expect status, length bytes */
+
memcpy(ptr, dout, dout_len);
ptr += dout_len;
- if (dev->cmd_version_is_supported)
- *ptr++ = (uint8_t)
- cros_ec_calc_checksum(dev->dout, dout_len + 3);
+ *ptr++ = (uint8_t)
+ cros_ec_calc_checksum(dev->dout, dout_len + 3);
/* Set to the proper i2c bus */
if (i2c_set_bus_num(dev->bus_num)) {
@@ -121,26 +121,20 @@
return -(int)*in_ptr;
}
- if (dev->cmd_version_is_supported) {
- int len, csum;
-
- len = in_ptr[1];
- if (len + 3 > sizeof(dev->din)) {
- debug("%s: Received length %#02x too large\n",
- __func__, len);
- return -1;
- }
- csum = cros_ec_calc_checksum(in_ptr, 2 + len);
- if (csum != in_ptr[2 + len]) {
- debug("%s: Invalid checksum rx %#02x, calced %#02x\n",
- __func__, in_ptr[2 + din_len], csum);
- return -1;
- }
- din_len = min(din_len, len);
- cros_ec_dump_data("in", -1, in_ptr, din_len + 3);
- } else {
- cros_ec_dump_data("in (old)", -1, in_ptr, in_bytes);
+ len = in_ptr[1];
+ if (len + 3 > sizeof(dev->din)) {
+ debug("%s: Received length %#02x too large\n",
+ __func__, len);
+ return -1;
}
+ csum = cros_ec_calc_checksum(in_ptr, 2 + len);
+ if (csum != in_ptr[2 + len]) {
+ debug("%s: Invalid checksum rx %#02x, calced %#02x\n",
+ __func__, in_ptr[2 + din_len], csum);
+ return -1;
+ }
+ din_len = min(din_len, len);
+ cros_ec_dump_data("in", -1, in_ptr, din_len + 3);
/* Return pointer to dword-aligned input data, if any */
*dinp = dev->din + sizeof(int64_t);
@@ -178,7 +172,5 @@
{
i2c_init(dev->max_frequency, dev->addr);
- dev->cmd_version_is_supported = 0;
-
return 0;
}