Merge with /home/hs/TQ/u-boot-dev
diff --git a/CHANGELOG b/CHANGELOG
index 6efddd0..e0b9be9 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,761 @@
+commit c84bad0ef60e7055ab0bd49b93069509cecc382a
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Dec 20 00:29:43 2006 +0100
+
+ Fix to make the baudrate changes immediate for the MCF52x2 family.
+
+commit daa6e418bcc0c717752e8de939c213c790286096
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Dec 20 00:27:32 2006 +0100
+
+ Preliminary support for the iDMR board (ColdFire).
+
+commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
+Author: Andrei Safronov <safronov@pollux.denx.de>
+Date: Fri Dec 8 16:23:08 2006 +0100
+
+ automatic update mechanism
+
+commit dd520bf314c7add4183c5191692180f576f96b60
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Thu Nov 30 18:02:20 2006 +0100
+
+ Code cleanup.
+
+commit 8d9a8610b8256331132227e9e6585c6bd5742787
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Thu Nov 30 01:54:07 2006 +0100
+
+ Code cleanup. Update CHANGELOG.
+
+commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Wed Nov 29 16:23:42 2006 +0100
+
+ [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
+
+ The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
+ not the XLB frequency.
+
+ This patch depends on the previous patches for MPC52xx device tree support
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
+
+commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 29 15:42:37 2006 +0100
+
+ [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
+
+ This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
+ and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
+ quite similar and share the same board directory "prodrive/p3mx"
+ and the same config file "p3mx.h".
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 29 12:53:15 2006 +0100
+
+ [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
+
+ In the bootvx command the load address was only read from the env
+ variable "loadaddr" and not optionally passed as paramter as described
+ in the help. This is fixed with this patch. The behaviour is now the
+ same as in the bootelf command.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 29 12:03:57 2006 +0100
+
+ [PATCH] include/ppc440.h minor error affecting interrupts
+
+ Fixed include/ppc440.c for UIC address Bug
+
+ Corrects bug affecting the addresses for the universal interrupt
+ controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
+
+ Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
+Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+Date: Tue Nov 28 16:17:27 2006 -0600
+
+ Make fsl-i2c not conflict with SOFT I2C
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 14198bf768fdc958e3c1afd2404e5262208e98d7
+Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+Date: Tue Nov 28 16:17:18 2006 -0600
+
+ Fix I2C master address initialization.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Nov 28 23:31:19 2006 -0600
+
+ Assign maintainers for mpc8349emds and mpc8360emds
+
+ Dave for mpc8360emds, and me for mpc8349emds.
+
+commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Nov 28 23:28:33 2006 -0600
+
+ Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
+
+ give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
+ since they are passed by reference to ucc_get_cmxucr_reg and assigned.
+
+commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Nov 28 12:09:35 2006 -0600
+
+ mpc83xx: Miscellaneous code style fixes
+
+ Implement various code style fixes and similar changes.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 28 17:55:49 2006 +0100
+
+ [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
+
+ This patch adds the code and configuration necessary to boot with an
+ arch/powerpc Linux kernel.
+
+ Signed-off-by: Grant Likely <grant.likely@gmail.com>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit e732faec95a83cb468b4850ae807c8301dde8f6a
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 28 16:09:24 2006 +0100
+
+ [PATCH] PPC4xx: 440SP Rev. C detection added
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 28 11:04:45 2006 +0100
+
+ [PATCH] nand: Fix patch merge problem
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Mon Nov 27 22:53:53 2006 +0100
+
+ Update CHANGELOG
+
+commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 17:43:25 2006 +0100
+
+ [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
+
+ Patch below corrects the setting of the zmiifer register, it was
+ overwritting the register rather than ORing the settings.
+
+ Signed-off-by: Neil Wilson <NWilson@airspan.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d1a72545296800b7e219f93104ad5836f0003d66
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 17:34:10 2006 +0100
+
+ [PATCH] Select NAND embedded environment from board configuration
+
+ The current NAND Bootloader setup forces the environment
+ variables to be in line with the bootloader. This change
+ enables the configuration to be made in the board include
+ file instead so that it can be individually enabled.
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 15784862857c3c2214498defcfed84ff137fb81e
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 17:22:19 2006 +0100
+
+ [PATCH] nand_wait() timeout fixes
+
+ Two fixes for the nand_wait() function in
+ drivers/nand/nand_base.c:
+
+ 1. Use correct timeouts. The original timeouts in Linux
+ source are 400ms and 20ms not 40s and 20s
+
+ 2. Return correct error value in case of timeout. 0 is
+ interpreted as OK.
+
+ Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit da5553b095bf04f4f109ad7e565dae3aba47b230
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 17:04:06 2006 +0100
+
+ [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
+
+ This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
+ arguments to bootm. It removes the getenv("disable_of") test that used
+ to be used for this purpose.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit a9398e018593782c5fa7d0741955fc1256b34c1e
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Mon Nov 27 15:32:42 2006 +0100
+
+ Minor code cleanup. Update CHANGELOG.
+
+commit 1729b92cde575476684bffe819d0b7791b57bff2
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 14:52:04 2006 +0100
+
+ [PATCH] 4xx: Fix problem with board specific reset code (now for real)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 14:49:51 2006 +0100
+
+ [PATCH] alpr: remove unused board specific flash driver
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 14:48:41 2006 +0100
+
+ [PATCH] 4xx: Fix problem with board specific reset code
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ec0c2ec725aec9524a177a77ce75559e644a931a
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 14:46:06 2006 +0100
+
+ [PATCH] Remove testing 4xx enet PHY setup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 14:12:17 2006 +0100
+
+ [PATCH] Update Prodrive ALPR board support (440GX)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 78d620ebb5871d252270dedfad60c6568993b780
+Author: Wolfgang Denk <wd@atlas.denx.de>
+Date: Thu Nov 23 22:58:58 2006 +0100
+
+ Updates for TQM5200 modules:
+ - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
+ - simplify "udate" definitions
+
+commit 2053283304eeddf250d109e6791eb6fa4cad14f7
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 22 13:20:50 2006 +0100
+
+ [PATCH] PPC4xx start.S: Fix for processor errata
+
+ Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
+ errata 1.12: 440_33 by moving patch up in code.
+
+ Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4ef6251403f637841000e0fef9e832aa01339822
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 20 20:39:52 2006 +0100
+
+ [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Mon Nov 20 10:28:30 2006 +0100
+
+ Update CHANGELOG
+
+commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 13 13:55:24 2006 +0100
+
+ [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
+
+ * Adds support for AMD command set Top Boot flash geometry reversal
+ * Adds support for reading JEDEC Manufacturer ID and Device ID
+ * Adds support for displaying command set, manufacturer id and
+ device ids (flinfo)
+ * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
+ * Removes outdated change history (refer to git log instead)
+
+ Signed-off-by: Tolunay Orkun <listmember@orkun.us>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b21b511d4c50408f4853f46f06b601272196223f
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sun Nov 12 21:13:23 2006 +0100
+
+ Update CHANGELOG
+
+commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sat Nov 11 22:48:22 2006 +0100
+
+ Disable the watchdog in the default config for the V38B board.
+
+commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sat Nov 11 22:43:00 2006 +0100
+
+ Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
+ group is enabled for USB earlier (in cpu_init_f() instead of
+ usb_lowlevel_init()).
+
+commit 91650b3e4de688038d4f71279c44858e3e2c6870
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Mon Nov 6 17:06:36 2006 +0100
+
+ Sequential accesses to non-existent memory must be synchronized,
+ at least on G2 cores.
+
+ This fixes get_ram_size() problems on MPC5200 Rev. B boards.
+
+commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Nov 3 19:15:00 2006 -0600
+
+ mpc83xx: Update 83xx to use fsl_i2c.c
+
+ Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
+ cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
+ Added multiple I2C bus support to fsl_i2c.c.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit d239d74b1c937984bc519083a8e7de373a390f06
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Nov 3 12:00:28 2006 -0600
+
+ mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
+
+ Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
+ tree matches the other 8xxx trees.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit f7fb2e703ec9688541416962724adff70a7322cb
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Nov 2 19:47:11 2006 -0600
+
+ mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
+
+commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
+Author: Dave Liu <daveliu@freescale.com>
+Date: Thu Nov 2 18:05:50 2006 -0600
+
+ mpc83xx: Fix the incorrect dcbz operation
+
+ The 834x rev1.x silicon has one CPU5 errata.
+
+ The issue is when the data cache locked with
+ HID0[DLOCK], the dcbz instruction looks like no-op inst.
+
+ The right behavior of the data cache is when the data cache
+ Locked with HID0[DLOCK], the dcbz instruction allocates
+ new tags in cache.
+
+ The 834x rev3.0 and later and 8360 have not this bug inside.
+
+ So, when 834x rev3.0/8360 are working with ECC, the dcbz
+ instruction will corrupt the stack in cache, the processor will
+ checkstop reset.
+
+ However, the 834x rev1.x can work with ECC with these code,
+ because the sillicon has this cache bug. The dcbz will not
+ corrupt the stack in cache.
+ Really, it is the fault code running on fault sillicon.
+
+ This patch fix the incorrect dcbz operation. Instead of
+ CPU FP writing to initialise the ECC.
+
+ CHANGELOG:
+ * Fix the incorrect dcbz operation instead of CPU FP
+ writing to initialise the ECC memory. Otherwise, it
+ will corrupt the stack in cache, The processor will checkstop
+ reset.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Nov 1 00:10:40 2006 -0600
+
+ mpc83xx: add OF_FLAT_TREE bits to 83xx boards
+
+ add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
+ STDOUT_PATH configuration bits to mpc8349emds,
+ mpc8349itx, and mpc8360emds board code.
+
+ redo environment to use bootm with the fdtaddr
+ for booting ARCH=powerpc kernels by default,
+ and provide default fdtaddr values.
+
+commit 48041365b3420589ad464ebc7752e0053538b729
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Nov 1 00:07:25 2006 -0600
+
+ mpc83xx: change ft code to modify local-mac-address property
+
+ Update 83xx OF code to update local-mac-address properties
+ for ethernet instead of the obsolete 'address' property.
+
+commit 9ca880a250870a7d55754291b5591d2b5fe89b54
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Oct 31 21:23:16 2006 -0600
+
+ mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
+
+ This patch also adds an improved I2C set_speed(), which handles all clock
+ frequencies.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit ac4b5622ce050b5ee1e154b98df630d778661632
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 31 19:54:59 2006 -0600
+
+ mpc83xx: add the README.mpc8360emds
+
+ add doc/README.mpc8360emds to accompany the new board support
+
+commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Nov 3 12:11:15 2006 -0600
+
+ mpc83xx: add QE ethernet support
+
+ this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
+
+commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Nov 3 19:33:44 2006 -0600
+
+ mpc83xx: Add MPC8360EMDS basic board support
+
+ Add support for the Freescale MPC8360EMDS board.
+ Includes DDR, DUART, Local Bus, PCI.
+
+commit 23892e49352de74f7fac36ff90bb1be143d195e3
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 31 19:30:40 2006 -0600
+
+ mpc83xx: add the QUICC Engine (QE) immap file
+
+ common QE immap file. Also required for 8360.
+
+commit b701652a4992bdcc62fb1a6038a85beef9e55da4
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 31 19:25:38 2006 -0600
+
+ mpc83xx: Add 8360 specifics to 83xx immap
+
+ Mainly add QE device dependencies, with appropriate 8360 protection.
+ Lindent also run.
+
+commit 988833324a7fda482c8ac3ca23eb539f8232e404
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Oct 31 19:14:41 2006 -0600
+
+ mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
+
+ PREREQUISITE PATCHES:
+
+ * This patch can only be applied after the following patches have been applied:
+
+ 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
+ 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
+
+ CHANGELOG:
+
+ * For the 8349E-mITX, fix some size values in pci_init_board(), enable
+ the clock for the 2nd USB board (Linux kernel will hang otherwise),
+ and fix the CONFIG_BOOTARGS macro.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Oct 31 18:44:42 2006 -0600
+
+ mpc83xx: Add support for the MPC8349E-mITX
+
+ PREREQUISITE PATCHES:
+
+ * This patch can only be applied after the following patches have been applied:
+
+ 1) DNX#2006090742000024 "Add support for multiple I2C buses"
+ 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
+ 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
+ 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
+ 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
+
+ CHANGELOG:
+
+ * Add support for the Freescale MPC8349E-mITX reference design platform.
+ The second TSEC (Vitesse 7385 switch) is not supported at this time.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 183da6d9b446cc12123455844ad1187e2375626f
+Author: Ben Warren <bwarren@qstreams.com>
+Date: Tue Sep 12 10:15:53 2006 -0400
+
+ Additional MPC8349 support for multibus i2c
+
+ Hello,
+
+ Here is a patch for a file that was accidentally left out of a previous
+ attempt.
+
+ It accompanies the patch with ticket DNX#2006090742000024
+
+ CHANGELOG:
+ Change PCI initialization to use new multi-bus I2C API.
+
+ regards,
+ Ben
+
+commit b24f119d672b709d153ff2ac091d4aa63ec6877d
+Author: Ben Warren <bwarren@qstreams.com>
+Date: Thu Sep 7 16:51:04 2006 -0400
+
+ Multi-bus I2C implementation of MPC834x
+
+ Hello,
+
+ Attached is a patch implementing multiple I2C buses on the MPC834x CPU
+ family and the MPC8349EMDS board in particular.
+ This patch requires Patch 1 (Add support for multiple I2C buses).
+ Testing was performed on a 533MHz board.
+
+ /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
+
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+ CHANGELOG:
+ Implemented driver-level code to support two I2C buses on the
+ MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
+ are 50kHz, 100kHz and 400kHz on each bus.
+
+ regards,
+ Ben
+
+commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
+Author: Ben Warren <bwarren@qstreams.com>
+Date: Thu Sep 7 16:50:54 2006 -0400
+
+ Add support for multiple I2C buses
+
+ Hello,
+
+ Attached is a patch providing support for multiple I2C buses at the
+ command level. The second part of the patch includes an implementation
+ for the MPC834x CPU and MPC8349EMDS board.
+
+ /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
+
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+ Overview:
+
+ 1. Include new 'i2c' command (based on USB implementation) using
+ CONFIG_I2C_CMD_TREE.
+
+ 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
+ the commands to change bus number and speed are only available under the
+ new 'i2c' command mentioned in the first bullet.
+
+ 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
+ systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
+ of an array of bus-device pairs. Otherwise, it is an array of uchar.
+
+ CHANGELOG:
+ Added new 'i2c' master command for all I2C interaction. This is
+ conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
+ setting I2C bus speed as well as changing the active bus if the board
+ has more than one (conditionally compiled with
+ CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
+ Updated README.
+
+ regards,
+ Ben
+
+commit bed85caf872714ebf53013967a695c9d63acfc68
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Oct 31 18:13:36 2006 -0600
+
+ mpc83xx: Add support for Errata DDR6 on MPC 834x systems
+
+ CHANGELOG:
+
+ * Errata DDR6, which affects all current MPC 834x processors, lists changes
+ required to maintain compatibility with various types of DDR memory. This
+ patch implements those changes.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit afd6e470f639883002c7c59d562690a5cb0f4865
+Author: Timur Tabi <timur@freescale.com>
+Date: Wed Oct 25 18:45:23 2006 -0500
+
+ mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
+
+commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Aug 22 17:07:00 2006 -0500
+
+ mpc83xx: Add support for variable flash memory sizes on 83xx systems
+
+ CHANGELOG:
+
+ * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
+ window registers, instead of using a hard-coded value of 8MB.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
+Author: Tanya Jiang <tanya.jiang@freescale.com>
+Date: Thu Aug 3 18:38:13 2006 +0800
+
+ mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
+
+ Unified TQM834x variable names with 83xx and consolidated macro
+ in preparation for the 8360 and other upcoming 83xx devices.
+
+ Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
+
+commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
+Author: Dave Liu <daveliu@freescale.com>
+Date: Wed Oct 25 14:41:21 2006 -0500
+
+ mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
+
+ Incorporated the common unified variable names and the changes in preparation
+ for releasing mpc8360 patches.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 3894c46c27c64891f93ac04edde86a9fa9758d92
+Author: Tanya Jiang <tanya.jiang@freescale.com>
+Date: Thu Aug 3 18:36:02 2006 +0800
+
+ mpc83xx: Fix missing build for mpc8349emds pci.c
+
+ Make pci build for mpc8349emds
+
+ Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
+
+commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
+Author: Tanya Jiang <tanya.jiang@freescale.com>
+Date: Thu Aug 3 18:39:49 2006 +0800
+
+ mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
+
+ Removed unused file resetvec.S for mpc83xx cpu
+
+ Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
+
+commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
+Author: Nick Spence <Nick.Spence@freescale.com>
+Date: Sat Sep 30 00:32:59 2006 -0700
+
+ NAND Flash verify across block boundaries
+
+ This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
+ defined
+ and the write crosses a block boundary. The pointer to the verification
+ buffer (bufstart) is not being updated to reflect the starting of the
+ new
+ block so the verification of the second block fails.
+
+ CHANGELOG:
+
+ * Fix NAND FLASH page verification across block boundaries
+
+commit f484dc791a3932537213c43c654cc1295c64b84c
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Thu Sep 7 07:39:46 2006 -0700
+
+ Added RGMII support to the TSECs and Marvell 881111 Phy
+
+ Added a phy initialization to adjust the RGMII RX and TX timing
+ Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+
+commit c59200443072353044aa4bf737a5a60f9a9af231
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Thu Nov 2 15:15:01 2006 +0100
+
+ Release U-Boot 1.1.6
+
+commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Nov 1 02:04:38 2006 +0100
+
+ Finish up support for MarelV38B board
+ - add watchdog support
+ - enable GPIO_WKUP_7 pin for input
+ - code cleanup
+
+commit ffa150bc90c943ca265170bd1be3f293674dd5c7
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Nov 1 01:45:46 2006 +0100
+
+ - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
+ * remove warnings when compiling ethaddr.c
+ * adjust linker script (fixes a crash resulting from incorrect
+ definition of __u_boot_cmd_start)
+ - Some MarelV38B code cleanup.
+
+commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Nov 1 01:38:16 2006 +0100
+
+ - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
+ MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
+ Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
+ MPC5XXX_WU_GPIO_DATA_O for affected boards.
+
+ - Add defintions for some MPC5XXX GPIO pins.
+
+commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Nov 1 01:34:29 2006 +0100
+
+ Changed MarelV38B board make target to lowercase. Config file cleanup.
+
commit 1954be6e9c9421b45d0a9d05b10356acc7563150
Author: Wolfgang Denk <wd@pollux.denx.de>
Date: Sun Oct 29 01:03:51 2006 +0200
@@ -451,6 +1209,34 @@
Fix whitespace and 80-col issues.
+commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 7 11:36:51 2006 +0200
+
+ CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
+ Patch by Stefan Roese, 07 Oct 2006
+
+commit 5bc528fa4da751d472397b308137238a6465afd2
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 7 11:35:25 2006 +0200
+
+ Update ALPR code (NAND support working now)
+ Patch by Stefan Roese, 07 Oct 2006
+
+commit 77d5034847d328753b80c46b83f960a14a26f40e
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 7 11:33:03 2006 +0200
+
+ Remove compile warnings in fpga code
+ Patch by Stefan Roese, 07 Oct 2006
+
+commit f3443867e90d2979a7dd1c65b0d537777e1f9850
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 7 11:30:52 2006 +0200
+
+ Add CONFIG_BOARD_RESET to configure board specific reset function
+ Patch by Stefan Roese, 07 Oct 2006
+
commit f55df18187e7a45cb73fec4370d12135e6691ae1
Author: John Traill <john.traill@freescale.com>
Date: Fri Sep 29 08:23:12 2006 +0100
@@ -683,6 +1469,21 @@
Signed-off-by: Matthew McClintock <msm@freescale.com>
+commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Aug 15 14:22:35 2006 +0200
+
+ Add initial support for the ALPR board from Prodrive
+ NAND needs some additional testing
+ Patch by Heiko Schocher, 15 Aug 2006
+
+commit f0ff4692ff3372dec55074a8eb444943ab095abb
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Aug 15 14:15:51 2006 +0200
+
+ Add FPGA Altera Cyclone 2 support
+ Patch by Heiko Schocher, 15 Aug 2006
+
commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
Author: Jon Loeliger <jdl@freescale.com>
Date: Mon Aug 14 15:33:38 2006 -0500
diff --git a/CREDITS b/CREDITS
index 3f7b510..8021588 100644
--- a/CREDITS
+++ b/CREDITS
@@ -465,3 +465,8 @@
E: james.macaulay@amirix.com
D: Suppport for Amirix AP1000
W: www.amirix.com
+
+N: Timur Tabi
+E: timur@freescale.com
+D: Support for MPC8349E-mITX
+W: www.freescale.com
diff --git a/MAINTAINERS b/MAINTAINERS
index 8bb38b5..ce20def 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -277,10 +277,13 @@
Stefan Roese <sr@denx.de>
+ P3M7448 MPC7448
+
uc100 MPC857
TQM85xx MPC8540/8541/8555/8560
+ alpr PPC440GX
bamboo PPC440EP
bunbinga PPC405EP
ebony PPC440GP
@@ -293,6 +296,8 @@
yellowstone PPC440GR
yosemite PPC440EP
+ P3M750 PPC750FX/GX/GL
+
Yusdi Santoso <yusdi_santoso@adaptec.com>
HIDDEN_DRAGON MPC8241/MPC8245
@@ -339,6 +344,18 @@
svm_sc8xx MPC8xx
+Timur Tabi <timur@freescale.com>
+
+ MPC8349E-mITX MPC8349
+
+Kim Phillips <kim.phillips@freescale.com>
+
+ MPC8349EMDS MPC8349
+
+Dave Liu <daveliu@freescale.com>
+
+ MPC8360EMDS MPC8360
+
-------------------------------------------------------------------------
Unknown / orphaned boards:
diff --git a/MAKEALL b/MAKEALL
index 879a17f..d2159ef 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -74,21 +74,21 @@
#########################################################################
LIST_4xx=" \
- ADCIOP AP1000 AR405 ASH405 \
- bamboo bubinga CANBT CMS700 \
- CPCI2DP CPCI405 CPCI4052 CPCI405AB \
- CPCI405DT CPCI440 CPCIISER4 CRAYL1 \
- csb272 csb472 DASA_SIM DP405 \
- DU405 ebony ERIC EXBITGEN \
- G2000 HH405 HUB405 JSE \
- KAREF luan METROBOX MIP405 \
- MIP405T ML2 ml300 ocotea \
- OCRTC ORSG p3p440 PCI405 \
- pcs440ep PIP405 PLU405 PMC405 \
- PPChameleonEVB sbc405 sequoia sequoia_nand \
- VOH405 VOM405 W7OLMC W7OLMG \
- walnut WUH405 XPEDITE1K yellowstone \
- yosemite yucca bamboo \
+ ADCIOP alpr AP1000 AR405 \
+ ASH405 bamboo bubinga CANBT \
+ CMS700 CPCI2DP CPCI405 CPCI4052 \
+ CPCI405AB CPCI405DT CPCI440 CPCIISER4 \
+ CRAYL1 csb272 csb472 DASA_SIM \
+ DP405 DU405 ebony ERIC \
+ EXBITGEN G2000 HH405 HUB405 \
+ JSE KAREF luan METROBOX \
+ MIP405 MIP405T ML2 ml300 \
+ ocotea OCRTC ORSG p3p440 \
+ PCI405 pcs440ep PIP405 PLU405 \
+ PMC405 PPChameleonEVB sbc405 sequoia \
+ sequoia_nand VOH405 VOM405 W7OLMC \
+ W7OLMG walnut WUH405 XPEDITE1K \
+ yellowstone yosemite yucca \
"
#########################################################################
@@ -130,7 +130,7 @@
#########################################################################
LIST_83xx=" \
- TQM834x MPC8349EMDS \
+ TQM834x MPC8349EMDS MPC8349ITX MPC8360EMDS \
"
@@ -151,11 +151,12 @@
LIST_74xx=" \
DB64360 DB64460 EVB64260 P3G4 \
- PCIPPC2 PCIPPC6 ZUMA \
+ p3m7448 PCIPPC2 PCIPPC6 ZUMA \
"
LIST_7xx=" \
- BAB7xx CPCI750 ELPPC ppmc7xx \
+ BAB7xx CPCI750 ELPPC p3m750 \
+ ppmc7xx \
"
LIST_ppc="${LIST_5xx} ${LIST_5xxx} \
@@ -298,8 +299,8 @@
LIST_coldfire=" \
cobra5272 EB+MCF-EV123 EB+MCF-EV123_internal \
- M5271EVB M5272C3 M5282EVB TASREG \
- r5200 M5271EVB \
+ idmr M5271EVB M5272C3 M5282EVB \
+ TASREG r5200 M5271EVB \
"
#########################################################################
diff --git a/Makefile b/Makefile
index 34f219d..b145be4 100644
--- a/Makefile
+++ b/Makefile
@@ -93,7 +93,7 @@
export MKCONFIG
ifneq ($(OBJTREE),$(SRCTREE))
-REMOTE_BUILD := 1
+REMOTE_BUILD := 1
export REMOTE_BUILD
endif
@@ -174,9 +174,6 @@
ifeq ($(CPU),ppc4xx)
OBJS += cpu/$(CPU)/resetvec.o
endif
-ifeq ($(CPU),mpc83xx)
-OBJS += cpu/$(CPU)/resetvec.o
-endif
ifeq ($(CPU),mpc85xx)
OBJS += cpu/$(CPU)/resetvec.o
endif
@@ -206,6 +203,9 @@
LIBS += drivers/libdrivers.a
LIBS += drivers/nand/libnand.a
LIBS += drivers/nand_legacy/libnand_legacy.a
+ifeq ($(CPU),mpc83xx)
+LIBS += drivers/qe/qe.a
+endif
LIBS += drivers/sk98lin/libsk98lin.a
LIBS += post/libpost.a post/cpu/libcpu.a
LIBS += common/libcommon.a
@@ -378,8 +378,8 @@
icecube_5200_config \
icecube_5200_LOWBOOT_config \
icecube_5200_LOWBOOT08_config \
-icecube_5200_DDR_config \
-icecube_5200_DDR_LOWBOOT_config \
+icecube_5200_DDR_config \
+icecube_5200_DDR_LOWBOOT_config \
icecube_5200_DDR_LOWBOOT08_config \
icecube_5100_config: unconfig
@mkdir -p $(obj)include
@@ -458,7 +458,7 @@
@[ -n "$(findstring _SDRAM,$@)" ] || \
{ if [ -n "$(findstring mcc200,$@)" ]; \
then \
- echo "... with DDR" ; \
+ echo "... with DDR" ; \
else \
if [ -n "$(findstring _DDR,$@)" ];\
then \
@@ -865,9 +865,9 @@
RPXlite_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite
-RPXlite_DW_64_config \
-RPXlite_DW_LCD_config \
-RPXlite_DW_64_LCD_config \
+RPXlite_DW_64_config \
+RPXlite_DW_LCD_config \
+RPXlite_DW_64_LCD_config \
RPXlite_DW_NVRAM_config \
RPXlite_DW_NVRAM_64_config \
RPXlite_DW_NVRAM_LCD_config \
@@ -880,12 +880,12 @@
echo "... with 64MHz system clock ..."; \
}
@[ -z "$(findstring _LCD,$@)" ] || \
- { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \
+ { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \
echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \
echo "... with LCD display ..."; \
}
@[ -z "$(findstring _NVRAM,$@)" ] || \
- { echo "#define CFG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \
+ { echo "#define CFG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \
echo "... with ENV in NVRAM ..."; \
}
@$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw
@@ -984,6 +984,9 @@
ADCIOP_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
+alpr_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx alpr prodrive
+
AP1000_config:unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
@@ -1569,6 +1572,9 @@
@echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
@$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
+idmr_config : unconfig
+ @$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr
+
M5271EVB_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb
@@ -1588,15 +1594,39 @@
## MPC83xx Systems
#########################################################################
-MPC8349ADS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349ads
-
TQM834x_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x
MPC8349EMDS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds
+MPC8360EMDS_config \
+MPC8360EMDS_HOST_33_config \
+MPC8360EMDS_HOST_66_config \
+MPC8360EMDS_SLAVE_config: unconfig
+ @echo "" >include/config.h ; \
+ if [ "$(findstring _HOST_,$@)" ] ; then \
+ echo -n "... PCI HOST " ; \
+ echo "#define CONFIG_PCI" >>include/config.h ; \
+ fi ; \
+ if [ "$(findstring _SLAVE_,$@)" ] ; then \
+ echo "...PCI SLAVE 66M" ; \
+ echo "#define CONFIG_PCI" >>include/config.h ; \
+ echo "#define CONFIG_PCISLAVE" >>include/config.h ; \
+ fi ; \
+ if [ "$(findstring _33_,$@)" ] ; then \
+ echo -n "...33M ..." ; \
+ echo "#define PCI_33M" >>include/config.h ; \
+ fi ; \
+ if [ "$(findstring _66_,$@)" ] ; then \
+ echo -n "...66M..." ; \
+ echo "#define PCI_66M" >>include/config.h ; \
+ fi ;
+ @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds
+
+MPC8349ITX_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349itx
+
#########################################################################
## MPC85xx Systems
#########################################################################
@@ -1724,6 +1754,16 @@
P3G4_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
+p3m750_config \
+p3m7448_config: unconfig
+ @mkdir -p $(obj)include
+ @if [ "$(findstring 750_,$@)" ] ; then \
+ echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \
+ else \
+ echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \
+ fi
+ @$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive
+
PCIPPC2_config \
PCIPPC6_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2
@@ -1787,7 +1827,7 @@
ap922_config \
ap922_XA10_config \
ap7_config \
-ap720t_config \
+ap720t_config \
ap920t_config \
ap926ejs_config \
ap946es_config: unconfig
@@ -1944,7 +1984,7 @@
cm41xx_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695
-gth2_config : unconfig
+gth2_config : unconfig
@mkdir -p $(obj)include
@ >$(obj)include/config.h
@echo "#define CONFIG_GTH2 1" >>$(obj)include/config.h
@@ -2090,19 +2130,19 @@
#########################################################################
## MIPS32 AU1X00
#########################################################################
-dbau1000_config : unconfig
+dbau1000_config : unconfig
@mkdir -p $(obj)include
@ >$(obj)include/config.h
@echo "#define CONFIG_DBAU1000 1" >>$(obj)include/config.h
@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
-dbau1100_config : unconfig
+dbau1100_config : unconfig
@mkdir -p $(obj)include
@ >$(obj)include/config.h
@echo "#define CONFIG_DBAU1100 1" >>$(obj)include/config.h
@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
-dbau1500_config : unconfig
+dbau1500_config : unconfig
@mkdir -p $(obj)include
@ >$(obj)include/config.h
@echo "#define CONFIG_DBAU1500 1" >>$(obj)include/config.h
@@ -2120,7 +2160,7 @@
@echo "#define CONFIG_DBAU1550 1" >>$(obj)include/config.h
@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
-pb1000_config : unconfig
+pb1000_config : unconfig
@mkdir -p $(obj)include
@ >$(obj)include/config.h
@echo "#define CONFIG_PB1000 1" >>$(obj)include/config.h
diff --git a/README b/README
index b78ea61..ecfd1f8 100644
--- a/README
+++ b/README
@@ -1207,7 +1207,12 @@
clock chips. See common/cmd_i2c.c for a description of the
command line interface.
- CONFIG_HARD_I2C selects the CPM hardware driver for I2C.
+ CONFIG_I2C_CMD_TREE is a recommended option that places
+ all I2C commands under a single 'i2c' root command. The
+ older 'imm', 'imd', 'iprobe' etc. commands are considered
+ deprecated and may disappear in the future.
+
+ CONFIG_HARD_I2C selects a hardware I2C controller.
CONFIG_SOFT_I2C configures u-boot to use a software (aka
bit-banging) driver instead of CPM or similar hardware
@@ -1312,6 +1317,42 @@
in u-boot bd_info structure based on u-boot environment
variable "i2cfast". (see also i2cfast)
+ CONFIG_I2C_MULTI_BUS
+
+ This option allows the use of multiple I2C buses, each of which
+ must have a controller. At any point in time, only one bus is
+ active. To switch to a different bus, use the 'i2c dev' command.
+ Note that bus numbering is zero-based.
+
+ CFG_I2C_NOPROBES
+
+ This option specifies a list of I2C devices that will be skipped
+ when the 'i2c probe' command is issued (or 'iprobe' using the legacy
+ command). If CONFIG_I2C_MULTI_BUS is set, specify a list of bus-device
+ pairs. Otherwise, specify a 1D array of device addresses
+
+ e.g.
+ #undef CONFIG_I2C_MULTI_BUS
+ #define CFG_I2C_NOPROBES {0x50,0x68}
+
+ will skip addresses 0x50 and 0x68 on a board with one I2C bus
+
+ #define CONFIG_I2C_MULTI_BUS
+ #define CFG_I2C_MULTI_NOPROBES {{0,0x50},{0,0x68},{1,0x54}}
+
+ will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1
+
+ CFG_SPD_BUS_NUM
+
+ If defined, then this indicates the I2C bus number for DDR SPD.
+ If not defined, then U-Boot assumes that SPD is on I2C bus 0.
+
+ CONFIG_FSL_I2C
+
+ Define this option if you want to use Freescale's I2C driver in
+ drivers/fsl_i2c.c.
+
+
- SPI Support: CONFIG_SPI
Enables SPI driver (so far only tested with
@@ -1470,8 +1511,8 @@
Enable auto completion of commands using TAB.
- Note that this feature has NOT been implemented yet
- for the "hush" shell.
+ Note that this feature has NOT been implemented yet
+ for the "hush" shell.
CFG_HUSH_PARSER
@@ -2209,6 +2250,24 @@
CFG_POCMR2_MASK_ATTRIB: (MPC826x only)
Overrides the default PCI memory map in cpu/mpc8260/pci.c if set.
+- CONFIG_SPD_EEPROM
+ Get DDR timing information from an I2C EEPROM. Common with pluggable
+ memory modules such as SODIMMs
+ SPD_EEPROM_ADDRESS
+ I2C address of the SPD EEPROM
+
+- CFG_SPD_BUS_NUM
+ If SPD EEPROM is on an I2C bus other than the first one, specify here.
+ Note that the value must resolve to something your driver can deal with.
+
+- CFG_83XX_DDR_USES_CS0
+ Only for 83xx systems. If specified, then DDR should be configured
+ using CS0 and CS1 instead of CS2 and CS3.
+
+- CFG_83XX_DDR_USES_CS0
+ Only for 83xx systems. If specified, then DDR should be configured
+ using CS0 and CS1 instead of CS2 and CS3.
+
- CONFIG_ETHER_ON_FEC[12]
Define to enable FEC[12] on a 8xx series processor.
@@ -3114,11 +3173,11 @@
oftaddr=0x300000
=> bootm $loadaddr - $oftaddr
## Booting image at 00200000 ...
- Image Name: Linux-2.6.17-dirty
- Image Type: PowerPC Linux Kernel Image (gzip compressed)
- Data Size: 1029343 Bytes = 1005.2 kB
+ Image Name: Linux-2.6.17-dirty
+ Image Type: PowerPC Linux Kernel Image (gzip compressed)
+ Data Size: 1029343 Bytes = 1005.2 kB
Load Address: 00000000
- Entry Point: 00000000
+ Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Booting using flat device tree at 0x300000
diff --git a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
index f18313d..dcfd83e 100644
--- a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
+++ b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
@@ -50,13 +50,13 @@
MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE0)
| MCFSDRAMC_DACR_CASL(1)
- | MCFSDRAMC_DACR_CBM(3)
+ | MCFSDRAMC_DACR_CBM(3)
| MCFSDRAMC_DACR_PS_16);
MCFSDRAMC_DMR0 = MCFSDRAMC_DMR_BAM_16M
| MCFSDRAMC_DMR_V;
- MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IP;
+ MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IP;
*(unsigned short *)(CFG_SDRAM_BASE0) = 0xA5A5;
MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_RE;
@@ -70,10 +70,10 @@
#ifdef CFG_SDRAM_BASE1
MCFSDRAMC_DACR1 = MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE1)
| MCFSDRAMC_DACR_CASL(1)
- | MCFSDRAMC_DACR_CBM(3)
+ | MCFSDRAMC_DACR_CBM(3)
| MCFSDRAMC_DACR_PS_16;
- MCFSDRAMC_DMR1 = MCFSDRAMC_DMR_BAM_16M
+ MCFSDRAMC_DMR1 = MCFSDRAMC_DMR_BAM_16M
| MCFSDRAMC_DMR_V;
MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IP;
@@ -82,7 +82,7 @@
MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_RE;
for (i=0; i < 2000; i++)
asm(" nop");
- MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IMRS;
+ MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IMRS;
*(unsigned int *)(CFG_SDRAM_BASE1 + 0x220) = 0xA5A5;
size += CFG_SDRAM_SIZE1 * 1024 * 1024;
#endif
diff --git a/board/BuS/EB+MCF-EV123/VCxK.c b/board/BuS/EB+MCF-EV123/VCxK.c
index 4938817..4b46b7c 100644
--- a/board/BuS/EB+MCF-EV123/VCxK.c
+++ b/board/BuS/EB+MCF-EV123/VCxK.c
@@ -66,7 +66,7 @@
return 1;
}
-void vcxk_loadimage(ulong source)
+void vcxk_loadimage(ulong source)
{
int cnt;
vcxk_acknowledge_wait();
diff --git a/board/BuS/EB+MCF-EV123/VCxK.h b/board/BuS/EB+MCF-EV123/VCxK.h
index 74467ba..f591e5c 100644
--- a/board/BuS/EB+MCF-EV123/VCxK.h
+++ b/board/BuS/EB+MCF-EV123/VCxK.h
@@ -25,24 +25,24 @@
#define __VCXK_H_
extern int init_vcxk(void);
-void vcxk_loadimage(ulong source);
+void vcxk_loadimage(ulong source);
#define VIDEO_ACKNOWLEDGE_PORT MCFGPTB_GPTPORT
-#define VIDEO_ACKNOWLEDGE_DDR MCFGPTB_GPTDDR
+#define VIDEO_ACKNOWLEDGE_DDR MCFGPTB_GPTDDR
#define VIDEO_ACKNOWLEDGE_PIN 0x0001
-#define VIDEO_ENABLE_PORT MCFGPTB_GPTPORT
-#define VIDEO_ENABLE_DDR MCFGPTB_GPTDDR
+#define VIDEO_ENABLE_PORT MCFGPTB_GPTPORT
+#define VIDEO_ENABLE_DDR MCFGPTB_GPTDDR
#define VIDEO_ENABLE_PIN 0x0002
-#define VIDEO_REQUEST_PORT MCFGPTB_GPTPORT
-#define VIDEO_REQUEST_DDR MCFGPTB_GPTDDR
+#define VIDEO_REQUEST_PORT MCFGPTB_GPTPORT
+#define VIDEO_REQUEST_DDR MCFGPTB_GPTDDR
#define VIDEO_REQUEST_PIN 0x0004
#define VIDEO_Invert_CFG MCFGPIO_PEPAR
#define VIDEO_Invert_IO MCFGPIO_PEPAR_PEPA2
-#define VIDEO_INVERT_PORT MCFGPIO_PORTE
-#define VIDEO_INVERT_DDR MCFGPIO_DDRE
+#define VIDEO_INVERT_PORT MCFGPIO_PORTE
+#define VIDEO_INVERT_DDR MCFGPIO_DDRE
#define VIDEO_INVERT_PIN MCFGPIO_PORT2
#endif
diff --git a/board/BuS/EB+MCF-EV123/cfm_flash.c b/board/BuS/EB+MCF-EV123/cfm_flash.c
index 6ecf0d1..b326384 100644
--- a/board/BuS/EB+MCF-EV123/cfm_flash.c
+++ b/board/BuS/EB+MCF-EV123/cfm_flash.c
@@ -60,7 +60,7 @@
MCFCFM_MCR = 0;
MCFCFM_CLKD = CFM_CLK;
debug ("CFM Clock divider: %ld (%d Hz @ %ld Hz)\n",CFM_CLK,\
- CFG_CLK / (2* ((CFM_CLK & 0x3F)+1) * (1+((CFM_CLK & 0x40)>>6)*7)),\
+ CFG_CLK / (2* ((CFM_CLK & 0x3F)+1) * (1+((CFM_CLK & 0x40)>>6)*7)),\
CFG_CLK);
MCFCFM_SACC = 0;
MCFCFM_DACC = 0;
diff --git a/board/BuS/EB+MCF-EV123/flash.c b/board/BuS/EB+MCF-EV123/flash.c
index ba76bef..5e2647d 100644
--- a/board/BuS/EB+MCF-EV123/flash.c
+++ b/board/BuS/EB+MCF-EV123/flash.c
@@ -256,7 +256,7 @@
enable_interrupts ();
if (cflag)
- icache_enable ();
+ icache_enable ();
return rc;
}
diff --git a/board/BuS/EB+MCF-EV123/u-boot.lds b/board/BuS/EB+MCF-EV123/u-boot.lds
index d790018..ac53245 100644
--- a/board/BuS/EB+MCF-EV123/u-boot.lds
+++ b/board/BuS/EB+MCF-EV123/u-boot.lds
@@ -34,11 +34,11 @@
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/LEOX/elpt860/u-boot.lds b/board/LEOX/elpt860/u-boot.lds
index b09fc33..214752d 100644
--- a/board/LEOX/elpt860/u-boot.lds
+++ b/board/LEOX/elpt860/u-boot.lds
@@ -43,11 +43,11 @@
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/LEOX/elpt860/u-boot.lds.debug b/board/LEOX/elpt860/u-boot.lds.debug
index 6f5af91..17f99eb 100644
--- a/board/LEOX/elpt860/u-boot.lds.debug
+++ b/board/LEOX/elpt860/u-boot.lds.debug
@@ -43,11 +43,11 @@
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/MAI/AmigaOneG3SE/Makefile b/board/MAI/AmigaOneG3SE/Makefile
index cb6ea26..fa28d3b 100644
--- a/board/MAI/AmigaOneG3SE/Makefile
+++ b/board/MAI/AmigaOneG3SE/Makefile
@@ -30,7 +30,7 @@
LIB = $(obj)lib$(BOARD).a
COBJS = $(BOARD).o articiaS.o flash.o serial.o smbus.o articiaS_pci.o \
- via686.o i8259.o ../bios_emulator/x86interface.o \
+ via686.o i8259.o ../bios_emulator/x86interface.o \
../bios_emulator/bios.o ../bios_emulator/glue.o \
interrupts.o ps2kbd.o video.o usb_uhci.o enet.o \
../menu/cmd_menu.o cmd_boota.o nvram.o
diff --git a/board/MAI/AmigaOneG3SE/articiaS_pci.c b/board/MAI/AmigaOneG3SE/articiaS_pci.c
index 480dae5..45b81950 100644
--- a/board/MAI/AmigaOneG3SE/articiaS_pci.c
+++ b/board/MAI/AmigaOneG3SE/articiaS_pci.c
@@ -368,11 +368,11 @@
if (articiaS_init_vga() == -1)
{
/* If the VGA didn't init and we have stdout set to VGA, reset to serial */
-/* s = getenv("stdout"); */
-/* if (s && strcmp(s, "vga") == 0) */
-/* { */
-/* setenv("stdout", "serial"); */
-/* } */
+/* s = getenv("stdout"); */
+/* if (s && strcmp(s, "vga") == 0) */
+/* { */
+/* setenv("stdout", "serial"); */
+/* } */
}
}
pci_write_config_byte(PCI_BDF(0,1,0), PCI_INTERRUPT_LINE, 0xFF);
diff --git a/board/MAI/AmigaOneG3SE/enet.c b/board/MAI/AmigaOneG3SE/enet.c
index d4be889..ad2bcde 100644
--- a/board/MAI/AmigaOneG3SE/enet.c
+++ b/board/MAI/AmigaOneG3SE/enet.c
@@ -41,57 +41,57 @@
/* 3Com Commands, top 5 bits are command and bottom 11 bits are parameters */
-#define TotalReset (0<<11)
-#define SelectWindow (1<<11)
-#define StartCoax (2<<11)
-#define RxDisable (3<<11)
-#define RxEnable (4<<11)
-#define RxReset (5<<11)
-#define UpStall (6<<11)
-#define UpUnstall (6<<11)+1
-#define DownStall (6<<11)+2
-#define DownUnstall (6<<11)+3
-#define RxDiscard (8<<11)
-#define TxEnable (9<<11)
-#define TxDisable (10<<11)
-#define TxReset (11<<11)
-#define FakeIntr (12<<11)
-#define AckIntr (13<<11)
-#define SetIntrEnb (14<<11)
-#define SetStatusEnb (15<<11)
-#define SetRxFilter (16<<11)
-#define SetRxThreshold (17<<11)
-#define SetTxThreshold (18<<11)
-#define SetTxStart (19<<11)
-#define StartDMAUp (20<<11)
-#define StartDMADown (20<<11)+1
+#define TotalReset (0<<11)
+#define SelectWindow (1<<11)
+#define StartCoax (2<<11)
+#define RxDisable (3<<11)
+#define RxEnable (4<<11)
+#define RxReset (5<<11)
+#define UpStall (6<<11)
+#define UpUnstall (6<<11)+1
+#define DownStall (6<<11)+2
+#define DownUnstall (6<<11)+3
+#define RxDiscard (8<<11)
+#define TxEnable (9<<11)
+#define TxDisable (10<<11)
+#define TxReset (11<<11)
+#define FakeIntr (12<<11)
+#define AckIntr (13<<11)
+#define SetIntrEnb (14<<11)
+#define SetStatusEnb (15<<11)
+#define SetRxFilter (16<<11)
+#define SetRxThreshold (17<<11)
+#define SetTxThreshold (18<<11)
+#define SetTxStart (19<<11)
+#define StartDMAUp (20<<11)
+#define StartDMADown (20<<11)+1
#define StatsEnable (21<<11)
#define StatsDisable (22<<11)
-#define StopCoax (23<<11)
-#define SetFilterBit (25<<11)
+#define StopCoax (23<<11)
+#define SetFilterBit (25<<11)
/* The SetRxFilter command accepts the following classes */
-#define RxStation 1
+#define RxStation 1
#define RxMulticast 2
#define RxBroadcast 4
-#define RxProm 8
+#define RxProm 8
/* 3Com status word defnitions */
-#define IntLatch 0x0001
-#define HostError 0x0002
-#define TxComplete 0x0004
-#define TxAvailable 0x0008
-#define RxComplete 0x0010
-#define RxEarly 0x0020
-#define IntReq 0x0040
-#define StatsFull 0x0080
-#define DMADone (1<<8)
-#define DownComplete (1<<9)
-#define UpComplete (1<<10)
-#define DMAInProgress (1<<11) /* DMA controller is still busy.*/
-#define CmdInProgress (1<<12) /* EL3_CMD is still busy.*/
+#define IntLatch 0x0001
+#define HostError 0x0002
+#define TxComplete 0x0004
+#define TxAvailable 0x0008
+#define RxComplete 0x0010
+#define RxEarly 0x0020
+#define IntReq 0x0040
+#define StatsFull 0x0080
+#define DMADone (1<<8)
+#define DownComplete (1<<9)
+#define UpComplete (1<<10)
+#define DMAInProgress (1<<11) /* DMA controller is still busy.*/
+#define CmdInProgress (1<<12) /* EL3_CMD is still busy.*/
/* Polling Registers */
@@ -100,17 +100,17 @@
/* Register window 0 offets */
-#define Wn0EepromCmd 10 /* Window 0: EEPROM command register. */
-#define Wn0EepromData 12 /* Window 0: EEPROM results register. */
+#define Wn0EepromCmd 10 /* Window 0: EEPROM command register. */
+#define Wn0EepromData 12 /* Window 0: EEPROM results register. */
#define IntrStatus 0x0E /* Valid in all windows. */
/* Register window 0 EEPROM bits */
-#define EEPROM_Read 0x80
-#define EEPROM_WRITE 0x40
-#define EEPROM_ERASE 0xC0
-#define EEPROM_EWENB 0x30 /* Enable erasing/writing for 10 msec. */
-#define EEPROM_EWDIS 0x00 /* Disable EWENB before 10 msec timeout. */
+#define EEPROM_Read 0x80
+#define EEPROM_WRITE 0x40
+#define EEPROM_ERASE 0xC0
+#define EEPROM_EWENB 0x30 /* Enable erasing/writing for 10 msec. */
+#define EEPROM_EWDIS 0x00 /* Disable EWENB before 10 msec timeout. */
/* EEPROM locations. */
@@ -129,13 +129,13 @@
/* Register window 1 offsets, the window used in normal operation */
-#define TX_FIFO 0x10
-#define RX_FIFO 0x10
-#define RxErrors 0x14
-#define RxStatus 0x18
+#define TX_FIFO 0x10
+#define RX_FIFOa 0x10
+#define RxErrors 0x14
+#define RxStatus 0x18
#define Timer 0x1A
-#define TxStatus 0x1B
-#define TxFree 0x1C /* Remaining free bytes in Tx buffer. */
+#define TxStatus 0x1B
+#define TxFree 0x1C /* Remaining free bytes in Tx buffer. */
/* Register Window 2 */
@@ -147,47 +147,47 @@
#define Wn3_MAC_Ctrl 6
#define Wn3_Options 8
-#define BFEXT(value, offset, bitcount) \
+#define BFEXT(value, offset, bitcount) \
((((unsigned long)(value)) >> (offset)) & ((1 << (bitcount)) - 1))
#define BFINS(lhs, rhs, offset, bitcount) \
- (((lhs) & ~((((1 << (bitcount)) - 1)) << (offset))) | \
+ (((lhs) & ~((((1 << (bitcount)) - 1)) << (offset))) | \
(((rhs) & ((1 << (bitcount)) - 1)) << (offset)))
#define RAM_SIZE(v) BFEXT(v, 0, 3)
-#define RAM_WIDTH(v) BFEXT(v, 3, 1)
-#define RAM_SPEED(v) BFEXT(v, 4, 2)
+#define RAM_WIDTH(v) BFEXT(v, 3, 1)
+#define RAM_SPEED(v) BFEXT(v, 4, 2)
#define ROM_SIZE(v) BFEXT(v, 6, 2)
-#define RAM_SPLIT(v) BFEXT(v, 16, 2)
+#define RAM_SPLIT(v) BFEXT(v, 16, 2)
#define XCVR(v) BFEXT(v, 20, 4)
-#define AUTOSELECT(v) BFEXT(v, 24, 1)
+#define AUTOSELECT(v) BFEXT(v, 24, 1)
/* Register Window 4: Xcvr/media bits */
-#define Wn4_FIFODiag 4
-#define Wn4_NetDiag 6
+#define Wn4_FIFODiag 4
+#define Wn4_NetDiag 6
#define Wn4_PhysicalMgmt 8
-#define Wn4_Media 10
+#define Wn4_Media 10
-#define Media_SQE 0x0008 /* Enable SQE error counting for AUI. */
-#define Media_10TP 0x00C0 /* Enable link beat and jabber for 10baseT. */
-#define Media_Lnk 0x0080 /* Enable just link beat for 100TX/100FX. */
-#define Media_LnkBeat 0x0800
+#define Media_SQE 0x0008 /* Enable SQE error counting for AUI. */
+#define Media_10TP 0x00C0 /* Enable link beat and jabber for 10baseT. */
+#define Media_Lnk 0x0080 /* Enable just link beat for 100TX/100FX. */
+#define Media_LnkBeat 0x0800
/* Register Window 7: Bus Master control */
-#define Wn7_MasterAddr 0
-#define Wn7_MasterLen 6
-#define Wn7_MasterStatus 12
+#define Wn7_MasterAddr 0
+#define Wn7_MasterLen 6
+#define Wn7_MasterStatus 12
/* Boomerang bus master control registers. */
-#define PktStatus 0x20
+#define PktStatus 0x20
#define DownListPtr 0x24
-#define FragAddr 0x28
-#define FragLen 0x2c
+#define FragAddr 0x28
+#define FragLen 0x2c
#define TxFreeThreshold 0x2f
-#define UpPktStatus 0x30
+#define UpPktStatus 0x30
#define UpListPtr 0x38
/* The Rx and Tx descriptor lists. */
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
index ccf6f0c..ff211ae 100644
--- a/board/amcc/sequoia/sequoia.c
+++ b/board/amcc/sequoia/sequoia.c
@@ -31,6 +31,8 @@
extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+ulong flash_get_size (ulong base, int banknum);
+
int board_early_init_f(void)
{
unsigned long sdr0_cust0;
@@ -152,6 +154,11 @@
*/
/* Re-do sizing to get full correct info */
+
+ /* adjust flash start and offset */
+ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
+ gd->bd->bi_flashoffset = 0;
+
#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
mtdcr(ebccfga, pb3cr);
#else
@@ -192,9 +199,10 @@
#endif
mtdcr(ebccfgd, pbcr);
- /* adjust flash start and offset */
- gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
- gd->bd->bi_flashoffset = 0;
+ /*
+ * Re-check to get correct base address
+ */
+ flash_get_size(gd->bd->bi_flashstart, 0);
#ifdef CFG_ENV_IS_IN_FLASH
/* Monitor protection ON by default */
diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c
index 92dc9d4..754ae44 100644
--- a/board/amcc/yellowstone/yellowstone.c
+++ b/board/amcc/yellowstone/yellowstone.c
@@ -552,3 +552,9 @@
}
#endif
+
+void board_reset(void)
+{
+ /* give reset to BCSR */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09;
+}
diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c
index 7f2e718..588ee90 100644
--- a/board/amcc/yosemite/yosemite.c
+++ b/board/amcc/yosemite/yosemite.c
@@ -548,3 +548,9 @@
}
#endif
+
+void board_reset(void)
+{
+ /* give reset to BCSR */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09;
+}
diff --git a/board/emk/top5200/top5200.c b/board/emk/top5200/top5200.c
index 12acc57..d741e6b 100644
--- a/board/emk/top5200/top5200.c
+++ b/board/emk/top5200/top5200.c
@@ -190,7 +190,7 @@
{
debug ("init_ide_reset\n");
- /* Configure PSC1_4 as GPIO output for ATA reset */
+ /* Configure PSC1_4 as GPIO output for ATA reset */
*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4;
}
diff --git a/board/esd/cpci5200/cpci5200.c b/board/esd/cpci5200/cpci5200.c
index f14331b..a925b84 100644
--- a/board/esd/cpci5200/cpci5200.c
+++ b/board/esd/cpci5200/cpci5200.c
@@ -191,8 +191,7 @@
extern void pci_mpc5xxx_init(struct pci_controller *);
-void pci_init_board(void
- ) {
+void pci_init_board(void) {
pci_mpc5xxx_init(&hose);
}
#endif
diff --git a/board/esd/pf5200/pf5200.c b/board/esd/pf5200/pf5200.c
index 1f30d45..77e164b 100644
--- a/board/esd/pf5200/pf5200.c
+++ b/board/esd/pf5200/pf5200.c
@@ -191,8 +191,7 @@
extern void pci_mpc5xxx_init(struct pci_controller *);
-void pci_init_board(void
- ) {
+void pci_init_board(void) {
pci_mpc5xxx_init(&hose);
}
#endif
diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c
index f958b32..700c9d9 100644
--- a/board/icecube/icecube.c
+++ b/board/icecube/icecube.c
@@ -29,6 +29,10 @@
#include <pci.h>
#include <asm/processor.h>
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+
#if defined(CONFIG_LITE5200B)
#include "mt46v32m16.h"
#else
@@ -312,7 +316,7 @@
{
debug ("init_ide_reset\n");
- /* Configure PSC1_4 as GPIO output for ATA reset */
+ /* Configure PSC1_4 as GPIO output for ATA reset */
*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4;
/* Deassert reset */
@@ -332,3 +336,11 @@
}
}
#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+}
+#endif
diff --git a/board/idmr/Makefile b/board/idmr/Makefile
new file mode 100644
index 0000000..cf07cf4
--- /dev/null
+++ b/board/idmr/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o flash.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/idmr/config.mk b/board/idmr/config.mk
new file mode 100644
index 0000000..f7c2258
--- /dev/null
+++ b/board/idmr/config.mk
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xff800000
diff --git a/board/idmr/flash.c b/board/idmr/flash.c
new file mode 100644
index 0000000..ba9b009
--- /dev/null
+++ b/board/idmr/flash.c
@@ -0,0 +1,356 @@
+/*
+ * (C) Copyright 2000-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#define PHYS_FLASH_1 CFG_FLASH_BASE
+#define FLASH_BANK_SIZE 0x800000
+#define EN29LV640 0x227e227e
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+void flash_print_info (flash_info_t * info)
+{
+ int i;
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case (AMD_MANUFACT & FLASH_VENDMASK):
+ printf ("AMD: ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case (EN29LV640 & FLASH_TYPEMASK):
+ printf ("EN29LV640 (16Mbit)\n");
+ break;
+ default:
+ printf ("Unknown Chip Type\n");
+ goto Done;
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; i++) {
+ if ((i % 5) == 0) {
+ printf ("\n ");
+ }
+ printf (" %08lX%s", info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
+
+ Done:
+ return;
+}
+
+
+unsigned long flash_init (void)
+{
+ int i, j;
+ ulong size = 0;
+
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ ulong flashbase = 0;
+
+ flash_info[i].flash_id =
+ (AMD_MANUFACT & FLASH_VENDMASK) |
+ (EN29LV640 & FLASH_TYPEMASK);
+ flash_info[i].size = FLASH_BANK_SIZE;
+ flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+ memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+ if (i == 0)
+ flashbase = PHYS_FLASH_1;
+ else
+ panic ("configured to many flash banks!\n");
+
+ for (j = 0; j < flash_info[i].sector_count; j++) {
+ flash_info[i].start[j] = flashbase + 0x10000 * j;
+ }
+ size += flash_info[i].size;
+ }
+
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_FLASH_BASE,
+ CFG_FLASH_BASE + 0x30000, &flash_info[0]);
+
+ return size;
+}
+
+
+#define CMD_READ_ARRAY 0x00F0
+#define CMD_UNLOCK1 0x00AA
+#define CMD_UNLOCK2 0x0055
+#define CMD_ERASE_SETUP 0x0080
+#define CMD_ERASE_CONFIRM 0x0030
+#define CMD_PROGRAM 0x00A0
+#define CMD_UNLOCK_BYPASS 0x0020
+
+#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555<<1)))
+#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA<<1)))
+
+#define BIT_ERASE_DONE 0x0080
+#define BIT_RDY_MASK 0x0080
+#define BIT_PROGRAM_ERROR 0x0020
+#define BIT_TIMEOUT 0x80000000 /* our flag */
+
+#define READY 1
+#define ERR 2
+#define TMO 4
+
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+ ulong result;
+ int iflag, prot, sect;
+ int rc = ERR_OK;
+ int chip1;
+
+ /* first look for protection bits */
+
+ if (info->flash_id == FLASH_UNKNOWN)
+ return ERR_UNKNOWN_FLASH_TYPE;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ return ERR_INVAL;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) !=
+ (AMD_MANUFACT & FLASH_VENDMASK)) {
+ return ERR_UNKNOWN_FLASH_VENDOR;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+ if (prot)
+ return ERR_PROTECTED;
+
+ /*
+ * Disable interrupts which might cause a timeout
+ * here. Remember that our exception vectors are
+ * at address 0 in the flash, and we don't want a
+ * (ticker) exception to happen while the flash
+ * chip is in programming mode.
+ */
+ iflag = disable_interrupts ();
+
+ printf ("\n");
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
+ printf ("Erasing sector %2d ... ", sect);
+
+ /* arm simple, non interrupt dependent timer */
+ set_timer (0);
+
+ if (info->protect[sect] == 0) { /* not protected */
+ volatile u16 *addr =
+ (volatile u16 *) (info->start[sect]);
+
+ MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+ MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+ MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
+
+ MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+ MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+ *addr = CMD_ERASE_CONFIRM;
+
+ /* wait until flash is ready */
+ chip1 = 0;
+
+ do {
+ result = *addr;
+
+ /* check timeout */
+ if (get_timer (0) > CFG_FLASH_ERASE_TOUT * CFG_HZ / 1000) {
+ MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
+ chip1 = TMO;
+ break;
+ }
+
+ if (!chip1
+ && (result & 0xFFFF) & BIT_ERASE_DONE)
+ chip1 = READY;
+
+ } while (!chip1);
+
+ MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
+
+ if (chip1 == ERR) {
+ rc = ERR_PROG_ERROR;
+ goto outahere;
+ }
+ if (chip1 == TMO) {
+ rc = ERR_TIMOUT;
+ goto outahere;
+ }
+
+ printf ("ok.\n");
+ } else { /* it was protected */
+
+ printf ("protected!\n");
+ }
+ }
+
+ if (ctrlc ())
+ printf ("User Interrupt!\n");
+
+ outahere:
+ /* allow flash to settle - wait 10 ms */
+ printf("Waiting 10 ms...");
+ udelay (10000);
+
+/* for (i = 0; i < 10 * 1000 * 1000; ++i)
+ asm(" nop");
+*/
+
+ printf("done\n");
+ if (iflag)
+ enable_interrupts ();
+
+
+ return rc;
+}
+
+static int write_word (flash_info_t * info, ulong dest, ulong data)
+{
+ volatile u16 *addr = (volatile u16 *) dest;
+ ulong result;
+ int rc = ERR_OK;
+ int iflag;
+ int chip1;
+
+ /*
+ * Check if Flash is (sufficiently) erased
+ */
+ result = *addr;
+ if ((result & data) != data)
+ return ERR_NOT_ERASED;
+
+
+ /*
+ * Disable interrupts which might cause a timeout
+ * here. Remember that our exception vectors are
+ * at address 0 in the flash, and we don't want a
+ * (ticker) exception to happen while the flash
+ * chip is in programming mode.
+ */
+ iflag = disable_interrupts ();
+
+ MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+ MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+ MEM_FLASH_ADDR1 = CMD_PROGRAM;
+ *addr = data;
+
+ /* arm simple, non interrupt dependent timer */
+ set_timer (0);
+
+ /* wait until flash is ready */
+ chip1 = 0;
+ do {
+ result = *addr;
+
+ /* check timeout */
+ if (get_timer (0) > CFG_FLASH_ERASE_TOUT * CFG_HZ / 1000) {
+ chip1 = ERR | TMO;
+ break;
+ }
+ if (!chip1 && ((result & 0x80) == (data & 0x80)))
+ chip1 = READY;
+
+ } while (!chip1);
+
+ *addr = CMD_READ_ARRAY;
+
+ if (chip1 == ERR || *addr != data)
+ rc = ERR_PROG_ERROR;
+
+ if (iflag)
+ enable_interrupts ();
+
+ return rc;
+}
+
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ ulong wp, data;
+ int rc;
+
+ if (addr & 1) {
+ printf ("unaligned destination not supported\n");
+ return ERR_ALIGN;
+ }
+
+#if 0
+ if (cnt & 1) {
+ printf ("odd transfer sizes not supported\n");
+ return ERR_ALIGN;
+ }
+#endif
+
+ wp = addr;
+
+ if (addr & 1) {
+ data = (*((volatile u8 *) addr) << 8) | *((volatile u8 *)
+ src);
+ if ((rc = write_word (info, wp - 1, data)) != 0) {
+ return (rc);
+ }
+ src += 1;
+ wp += 1;
+ cnt -= 1;
+ }
+
+ while (cnt >= 2) {
+ data = *((volatile u16 *) src);
+ if ((rc = write_word (info, wp, data)) != 0) {
+ return (rc);
+ }
+ src += 2;
+ wp += 2;
+ cnt -= 2;
+ }
+
+ if (cnt == 1) {
+ data = (*((volatile u8 *) src) << 8) |
+ *((volatile u8 *) (wp + 1));
+ if ((rc = write_word (info, wp, data)) != 0) {
+ return (rc);
+ }
+ src += 1;
+ wp += 1;
+ cnt -= 1;
+ }
+
+ return ERR_OK;
+}
diff --git a/board/idmr/idmr.c b/board/idmr/idmr.c
new file mode 100644
index 0000000..58cdba1
--- /dev/null
+++ b/board/idmr/idmr.c
@@ -0,0 +1,169 @@
+/*
+ * (C) Copyright 2000-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/m5271.h>
+#include <asm/immap_5271.h>
+
+int checkboard (void) {
+ puts ("Board: iDMR\n");
+ return 0;
+};
+
+long int initdram (int board_type) {
+ int i;
+
+ /*
+ * After reset, CS0 is configured to cover entire address space. We
+ * need to configure it to its proper values, so that writes to
+ * CFG_SDRAM_BASE and vicinity during SDRAM controller setup below do
+ * now fall under CS0 (see 16.3.1 of the MCF5271 Reference Manual).
+ */
+
+ /* Flash chipselect, CS0 */
+ /* ;CSAR0: Flash at 0xFF800000 */
+ mbar_writeShort(0x0080, 0xFF80);
+
+ /* CSCR0: Flash 6 waits, 16bit */
+ mbar_writeShort(0x008A, 0x1980);
+
+ /* CSMR0: Flash 8MB, R/W, valid */
+ mbar_writeLong(0x0084, 0x007F0001);
+
+
+ /*
+ * SDRAM configuration proper
+ */
+
+ /*
+ * Address/Data Pin Assignment Reg.: enable address lines 23-21; do
+ * not enable data pins D[15:0], as we have 16 bit port to SDRAM
+ */
+ mbar_writeByte(MCF_GPIO_PAR_AD,
+ MCF_GPIO_AD_ADDR23 |
+ MCF_GPIO_AD_ADDR22 |
+ MCF_GPIO_AD_ADDR21);
+
+ /* No need to configure BS pins - reset values are OK */
+
+ /* Chip Select Pin Assignment Reg.: set CS[1-7] to GPIO */
+ mbar_writeByte(MCF_GPIO_PAR_CS, 0x00);
+
+ /* SDRAM Control Pin Assignment Reg. */
+ mbar_writeByte(MCF_GPIO_PAR_SDRAM,
+ MCF_GPIO_SDRAM_CSSDCS_00 | /* no matter: PAR_CS=0 */
+ MCF_GPIO_SDRAM_SDWE |
+ MCF_GPIO_SDRAM_SCAS |
+ MCF_GPIO_SDRAM_SRAS |
+ MCF_GPIO_SDRAM_SCKE |
+ MCF_GPIO_SDRAM_SDCS_01);
+
+ /*
+ * Wait 100us. We run the bus at 50Mhz, one cycle is 20ns. So 5
+ * iterations will do, but we do 10 just to be safe.
+ */
+ for (i = 0; i < 10; ++i)
+ asm(" nop");
+
+
+ /* 1. Initialize DRAM Control Register: DCR */
+ mbar_writeShort(MCF_SDRAMC_DCR,
+ MCF_SDRAMC_DCR_RTIM(0x10) | /* 65ns */
+ MCF_SDRAMC_DCR_RC(0x60)); /* 1562 cycles */
+
+
+ /*
+ * 2. Initialize DACR0
+ *
+ * CL: 11 (CL=3: 0x03, 0x02; CL=2: 0x1)
+ * CBM: cmd at A20, bank select bits 21 and up
+ * PS: 16 bit
+ */
+ mbar_writeLong(MCF_SDRAMC_DACR0,
+ MCF_SDRAMC_DACRn_BA(CFG_SDRAM_BASE>>18) |
+ MCF_SDRAMC_DACRn_BA(0x00) |
+ MCF_SDRAMC_DACRn_CASL(0x03) |
+ MCF_SDRAMC_DACRn_CBM(0x03) |
+ MCF_SDRAMC_DACRn_PS(0x03));
+
+ /* Initialize DMR0 */
+ mbar_writeLong(MCF_SDRAMC_DMR0,
+ MCF_SDRAMC_DMRn_BAM_16M |
+ MCF_SDRAMC_DMRn_V);
+
+
+ /* 3. Set IP bit in DACR to initiate PALL command */
+ mbar_writeLong(MCF_SDRAMC_DACR0,
+ mbar_readLong(MCF_SDRAMC_DACR0) |
+ MCF_SDRAMC_DACRn_IP);
+
+ /* Write to this block to initiate precharge */
+ *(volatile u16 *)(CFG_SDRAM_BASE) = 0xa5a5;
+
+ /*
+ * Wait at least 20ns to allow banks to precharge (t_RP = 20ns). We
+ * wait a wee longer, just to be safe.
+ */
+ for (i = 0; i < 5; ++i)
+ asm(" nop");
+
+
+ /* 4. Set RE bit in DACR */
+ mbar_writeLong(MCF_SDRAMC_DACR0,
+ mbar_readLong(MCF_SDRAMC_DACR0) |
+ MCF_SDRAMC_DACRn_RE);
+
+ /*
+ * Wait for at least 8 auto refresh cycles to occur, i.e. at least
+ * 781 bus cycles.
+ */
+ for (i = 0; i < 1000; ++i)
+ asm(" nop");
+
+ /* Finish the configuration by issuing the MRS */
+ mbar_writeLong(MCF_SDRAMC_DACR0,
+ mbar_readLong(MCF_SDRAMC_DACR0) |
+ MCF_SDRAMC_DACRn_MRS);
+
+ /*
+ * Write to the SDRAM Mode Register A0-A11 = 0x400
+ *
+ * Write Burst Mode = Programmed Burst Length
+ * Op Mode = Standard Op
+ * CAS Latency = 3
+ * Burst Type = Sequential
+ * Burst Length = 1
+ */
+ *(volatile u32 *)(CFG_SDRAM_BASE + 0x1800) = 0xa5a5a5a5;
+
+ return CFG_SDRAM_SIZE * 1024 * 1024;
+};
+
+
+int testdram (void) {
+
+ /* TODO: XXX XXX XXX */
+ printf ("DRAM test not implemented!\n");
+
+ return (0);
+}
diff --git a/board/idmr/u-boot.lds b/board/idmr/u-boot.lds
new file mode 100644
index 0000000..69f3179
--- /dev/null
+++ b/board/idmr/u-boot.lds
@@ -0,0 +1,145 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(m68k)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+GROUP(libgcc.a)
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/mcf52x2/start.o (.text)
+ lib_m68k/traps.o (.text)
+ cpu/mcf52x2/interrupts.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/zlib.o (.text)
+
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/environment.o (.ppcenv)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+
+ .reloc :
+ {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ _sbss = .;
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ _ebss = .;
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/mcc200/Makefile b/board/mcc200/Makefile
index 75808cb..5869119 100644
--- a/board/mcc200/Makefile
+++ b/board/mcc200/Makefile
@@ -25,7 +25,7 @@
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o lcd.o
+COBJS := $(BOARD).o lcd.o auto_update.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/mcc200/auto_update.c b/board/mcc200/auto_update.c
new file mode 100644
index 0000000..63e4139
--- /dev/null
+++ b/board/mcc200/auto_update.c
@@ -0,0 +1,457 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <image.h>
+#include <asm/byteorder.h>
+#include <usb.h>
+
+#ifdef CFG_HUSH_PARSER
+#include <hush.h>
+#endif
+
+
+#ifdef CONFIG_AUTO_UPDATE
+
+#ifndef CONFIG_USB_OHCI
+#error "must define CONFIG_USB_OHCI"
+#endif
+
+#ifndef CONFIG_USB_STORAGE
+#error "must define CONFIG_USB_STORAGE"
+#endif
+
+#ifndef CFG_HUSH_PARSER
+#error "must define CFG_HUSH_PARSER"
+#endif
+
+#if !(CONFIG_COMMANDS & CFG_CMD_FAT)
+#error "must define CFG_CMD_FAT"
+#endif
+
+/*
+ * Check whether a USB memory stick is plugged in.
+ * If one is found:
+ * 1) if prepare.img ist found load it into memory. If it is
+ * valid then run it.
+ * 2) if preinst.img is found load it into memory. If it is
+ * valid then run it. Update the EEPROM.
+ * 3) if firmw_01.img is found load it into memory. If it is valid,
+ * burn it into FLASH and update the EEPROM.
+ * 4) if kernl_01.img is found load it into memory. If it is valid,
+ * burn it into FLASH and update the EEPROM.
+ * 5) if app.img is found load it into memory. If it is valid,
+ * burn it into FLASH and update the EEPROM.
+ * 6) if disk.img is found load it into memory. If it is valid,
+ * burn it into FLASH and update the EEPROM.
+ * 7) if postinst.img is found load it into memory. If it is
+ * valid then run it. Update the EEPROM.
+ */
+
+#undef AU_DEBUG
+
+#undef debug
+#ifdef AU_DEBUG
+#define debug(fmt,args...) printf (fmt ,##args)
+#else
+#define debug(fmt,args...)
+#endif /* AU_DEBUG */
+
+/* possible names of files on the USB stick. */
+#define AU_FIRMWARE "u-boot.img"
+#define AU_KERNEL "kernel.img"
+
+struct flash_layout {
+ long start;
+ long end;
+};
+
+/* layout of the FLASH. ST = start address, ND = end address. */
+#define AU_FL_FIRMWARE_ST 0xfC000000
+#define AU_FL_FIRMWARE_ND 0xfC03FFFF
+#define AU_FL_KERNEL_ST 0xfC0C0000
+#define AU_FL_KERNEL_ND 0xfC1BFFFF
+
+static int au_usb_stor_curr_dev; /* current device */
+
+/* index of each file in the following arrays */
+#define IDX_FIRMWARE 0
+#define IDX_KERNEL 1
+
+/* max. number of files which could interest us */
+#define AU_MAXFILES 2
+
+/* pointers to file names */
+char *aufile[AU_MAXFILES];
+
+/* sizes of flash areas for each file */
+long ausize[AU_MAXFILES];
+
+/* array of flash areas start and end addresses */
+struct flash_layout aufl_layout[AU_MAXFILES] = { \
+ {AU_FL_FIRMWARE_ST, AU_FL_FIRMWARE_ND,}, \
+ {AU_FL_KERNEL_ST, AU_FL_KERNEL_ND,}, \
+};
+
+/* where to load files into memory */
+#define LOAD_ADDR ((unsigned char *)0x00200000)
+
+/* the app is the largest image */
+#define MAX_LOADSZ ausize[IDX_KERNEL]
+
+/*i2c address of the keypad status*/
+#define I2C_PSOC_KEYPAD_ADDR 0x53
+
+/* keypad mask */
+#define KEYPAD_ROW 3
+#define KEYPAD_COL 3
+#define KEYPAD_MASK_LO ((1<<(KEYPAD_COL-1+(KEYPAD_ROW*4-4)))&0xFF)
+#define KEYPAD_MASK_HI ((1<<(KEYPAD_COL-1+(KEYPAD_ROW*4-4)))>>8)
+
+/* externals */
+extern int fat_register_device(block_dev_desc_t *, int);
+extern int file_fat_detectfs(void);
+extern long file_fat_read(const char *, void *, unsigned long);
+extern int i2c_read (unsigned char, unsigned int, int , unsigned char* , int);
+extern int flash_sect_erase(ulong, ulong);
+extern int flash_sect_protect (int, ulong, ulong);
+extern int flash_write (char *, ulong, ulong);
+/* change char* to void* to shutup the compiler */
+extern block_dev_desc_t *get_dev (char*, int);
+extern int u_boot_hush_start(void);
+
+int au_check_cksum_valid(int idx, long nbytes)
+{
+ image_header_t *hdr;
+ unsigned long checksum;
+
+ hdr = (image_header_t *)LOAD_ADDR;
+
+ if (nbytes != (sizeof(*hdr) + ntohl(hdr->ih_size))) {
+ printf ("Image %s bad total SIZE\n", aufile[idx]);
+ return -1;
+ }
+ /* check the data CRC */
+ checksum = ntohl(hdr->ih_dcrc);
+
+ if (crc32 (0, (uchar *)(LOAD_ADDR + sizeof(*hdr)), ntohl(hdr->ih_size)) != checksum) {
+ printf ("Image %s bad data checksum\n", aufile[idx]);
+ return -1;
+ }
+ return 0;
+}
+
+int au_check_header_valid(int idx, long nbytes)
+{
+ image_header_t *hdr;
+ unsigned long checksum;
+ unsigned char buf[4];
+
+ hdr = (image_header_t *)LOAD_ADDR;
+ /* check the easy ones first */
+#undef CHECK_VALID_DEBUG
+#ifdef CHECK_VALID_DEBUG
+ printf("magic %#x %#x ", ntohl(hdr->ih_magic), IH_MAGIC);
+ printf("arch %#x %#x ", hdr->ih_arch, IH_CPU_ARM);
+ printf("size %#x %#lx ", ntohl(hdr->ih_size), nbytes);
+ printf("type %#x %#x ", hdr->ih_type, IH_TYPE_KERNEL);
+#endif
+ if (nbytes < sizeof(*hdr)) {
+ printf ("Image %s bad header SIZE\n", aufile[idx]);
+ return -1;
+ }
+ if (ntohl(hdr->ih_magic) != IH_MAGIC || hdr->ih_arch != IH_CPU_PPC) {
+ printf ("Image %s bad MAGIC or ARCH\n", aufile[idx]);
+ return -1;
+ }
+ /* check the hdr CRC */
+ checksum = ntohl(hdr->ih_hcrc);
+ hdr->ih_hcrc = 0;
+
+ if (crc32 (0, (uchar *)hdr, sizeof(*hdr)) != checksum) {
+ printf ("Image %s bad header checksum\n", aufile[idx]);
+ return -1;
+ }
+ hdr->ih_hcrc = htonl(checksum);
+ /* check the type - could do this all in one gigantic if() */
+ if ((idx == IDX_FIRMWARE) && (hdr->ih_type != IH_TYPE_FIRMWARE)) {
+ printf ("Image %s wrong type\n", aufile[idx]);
+ return -1;
+ }
+ if ((idx == IDX_KERNEL) && (hdr->ih_type != IH_TYPE_KERNEL)) {
+ printf ("Image %s wrong type\n", aufile[idx]);
+ return -1;
+ }
+ /* recycle checksum */
+ checksum = ntohl(hdr->ih_size);
+ /* for kernel and app the image header must also fit into flash */
+ if (idx != IDX_FIRMWARE)
+ checksum += sizeof(*hdr);
+ /* check the size does not exceed space in flash. HUSH scripts */
+ /* all have ausize[] set to 0 */
+ if ((ausize[idx] != 0) && (ausize[idx] < checksum)) {
+ printf ("Image %s is bigger than FLASH\n", aufile[idx]);
+ return -1;
+ }
+ return 0;
+}
+
+int au_do_update(int idx, long sz)
+{
+ image_header_t *hdr;
+ char *addr;
+ long start, end;
+ int off, rc;
+ uint nbytes;
+
+ hdr = (image_header_t *)LOAD_ADDR;
+
+ /* execute a script */
+ if (hdr->ih_type == IH_TYPE_SCRIPT) {
+ addr = (char *)((char *)hdr + sizeof(*hdr));
+ /* stick a NULL at the end of the script, otherwise */
+ /* parse_string_outer() runs off the end. */
+ addr[ntohl(hdr->ih_size)] = 0;
+ addr += 8;
+ parse_string_outer(addr, FLAG_PARSE_SEMICOLON);
+ return 0;
+ }
+
+ start = aufl_layout[idx].start;
+ end = aufl_layout[idx].end;
+
+ /* unprotect the address range */
+ /* this assumes that ONLY the firmware is protected! */
+ if (idx == IDX_FIRMWARE) {
+#undef AU_UPDATE_TEST
+#ifdef AU_UPDATE_TEST
+ /* erase it where Linux goes */
+ start = aufl_layout[1].start;
+ end = aufl_layout[1].end;
+#endif
+ flash_sect_protect(0, start, end);
+ }
+
+ /*
+ * erase the address range.
+ */
+ debug ("flash_sect_erase(%lx, %lx);\n", start, end);
+ flash_sect_erase(start, end);
+ wait_ms(100);
+ /* strip the header - except for the kernel and ramdisk */
+ if (hdr->ih_type == IH_TYPE_KERNEL) {
+ addr = (char *)hdr;
+ off = sizeof(*hdr);
+ nbytes = sizeof(*hdr) + ntohl(hdr->ih_size);
+ } else {
+ addr = (char *)((char *)hdr + sizeof(*hdr));
+#ifdef AU_UPDATE_TEST
+ /* copy it to where Linux goes */
+ if (idx == IDX_FIRMWARE)
+ start = aufl_layout[1].start;
+#endif
+ off = 0;
+ nbytes = ntohl(hdr->ih_size);
+ }
+
+ /* copy the data from RAM to FLASH */
+ debug ("flash_write(%p, %lx %x)\n", addr, start, nbytes);
+ rc = flash_write(addr, start, nbytes);
+ if (rc != 0) {
+ printf("Flashing failed due to error %d\n", rc);
+ return -1;
+ }
+
+ /* check the dcrc of the copy */
+ if (crc32 (0, (uchar *)(start + off), ntohl(hdr->ih_size)) != ntohl(hdr->ih_dcrc)) {
+ printf ("Image %s Bad Data Checksum After COPY\n", aufile[idx]);
+ return -1;
+ }
+
+ /* protect the address range */
+ /* this assumes that ONLY the firmware is protected! */
+ if (idx == IDX_FIRMWARE)
+ flash_sect_protect(1, start, end);
+ return 0;
+}
+
+/*
+ * this is called from board_init() after the hardware has been set up
+ * and is usable. That seems like a good time to do this.
+ * Right now the return value is ignored.
+ */
+int do_auto_update(void)
+{
+ block_dev_desc_t *stor_dev;
+ long sz;
+ int i, res, bitmap_first, cnt, old_ctrlc, got_ctrlc;
+ char *env;
+ long start, end;
+ char keypad_status1[2] = {0,0}, keypad_status2[2] = {0,0};
+
+ /*
+ * Read keypad status
+ */
+ i2c_read(I2C_PSOC_KEYPAD_ADDR, 0, 0, keypad_status1, 2);
+ wait_ms(500);
+ i2c_read(I2C_PSOC_KEYPAD_ADDR, 0, 0, keypad_status2, 2);
+
+ /*
+ * Check keypad
+ */
+ if ( !(keypad_status1[0] & KEYPAD_MASK_HI) ||
+ (keypad_status1[0] != keypad_status2[0])) {
+ return 0;
+ }
+ if ( !(keypad_status1[1] & KEYPAD_MASK_LO) ||
+ (keypad_status1[1] != keypad_status2[1])) {
+ return 0;
+ }
+ au_usb_stor_curr_dev = -1;
+ /* start USB */
+ if (usb_stop() < 0) {
+ debug ("usb_stop failed\n");
+ return -1;
+ }
+ if (usb_init() < 0) {
+ debug ("usb_init failed\n");
+ return -1;
+ }
+ /*
+ * check whether a storage device is attached (assume that it's
+ * a USB memory stick, since nothing else should be attached).
+ */
+ au_usb_stor_curr_dev = usb_stor_scan(0);
+ if (au_usb_stor_curr_dev == -1) {
+ debug ("No device found. Not initialized?\n");
+ return -1;
+ }
+ /* check whether it has a partition table */
+ stor_dev = get_dev("usb", 0);
+ if (stor_dev == NULL) {
+ debug ("uknown device type\n");
+ return -1;
+ }
+ if (fat_register_device(stor_dev, 1) != 0) {
+ debug ("Unable to use USB %d:%d for fatls\n",
+ au_usb_stor_curr_dev, 1);
+ return -1;
+ }
+ if (file_fat_detectfs() != 0) {
+ debug ("file_fat_detectfs failed\n");
+ }
+
+ /* initialize the array of file names */
+ memset(aufile, 0, sizeof(aufile));
+ aufile[IDX_FIRMWARE] = AU_FIRMWARE;
+ aufile[IDX_KERNEL] = AU_KERNEL;
+ /* initialize the array of flash sizes */
+ memset(ausize, 0, sizeof(ausize));
+ ausize[IDX_FIRMWARE] = (AU_FL_FIRMWARE_ND + 1) - AU_FL_FIRMWARE_ST;
+ ausize[IDX_KERNEL] = (AU_FL_KERNEL_ND + 1) - AU_FL_KERNEL_ST;
+ /*
+ * now check whether start and end are defined using environment
+ * variables.
+ */
+ start = -1;
+ end = 0;
+ env = getenv("firmware_st");
+ if (env != NULL)
+ start = simple_strtoul(env, NULL, 16);
+ env = getenv("firmware_nd");
+ if (env != NULL)
+ end = simple_strtoul(env, NULL, 16);
+ if (start >= 0 && end && end > start) {
+ ausize[IDX_FIRMWARE] = (end + 1) - start;
+ aufl_layout[0].start = start;
+ aufl_layout[0].end = end;
+ }
+ start = -1;
+ end = 0;
+ env = getenv("kernel_st");
+ if (env != NULL)
+ start = simple_strtoul(env, NULL, 16);
+ env = getenv("kernel_nd");
+ if (env != NULL)
+ end = simple_strtoul(env, NULL, 16);
+ if (start >= 0 && end && end > start) {
+ ausize[IDX_KERNEL] = (end + 1) - start;
+ aufl_layout[1].start = start;
+ aufl_layout[1].end = end;
+ }
+ /* make certain that HUSH is runnable */
+ u_boot_hush_start();
+ /* make sure that we see CTRL-C and save the old state */
+ old_ctrlc = disable_ctrlc(0);
+
+ bitmap_first = 0;
+ /* just loop thru all the possible files */
+ for (i = 0; i < AU_MAXFILES; i++) {
+ /* just read the header */
+ sz = file_fat_read(aufile[i], LOAD_ADDR, sizeof(image_header_t));
+ debug ("read %s sz %ld hdr %d\n",
+ aufile[i], sz, sizeof(image_header_t));
+ if (sz <= 0 || sz < sizeof(image_header_t)) {
+ debug ("%s not found\n", aufile[i]);
+ continue;
+ }
+ if (au_check_header_valid(i, sz) < 0) {
+ debug ("%s header not valid\n", aufile[i]);
+ continue;
+ }
+ sz = file_fat_read(aufile[i], LOAD_ADDR, MAX_LOADSZ);
+ debug ("read %s sz %ld hdr %d\n",
+ aufile[i], sz, sizeof(image_header_t));
+ if (sz <= 0 || sz <= sizeof(image_header_t)) {
+ debug ("%s not found\n", aufile[i]);
+ continue;
+ }
+ if (au_check_cksum_valid(i, sz) < 0) {
+ debug ("%s checksum not valid\n", aufile[i]);
+ continue;
+ }
+ /* this is really not a good idea, but it's what the */
+ /* customer wants. */
+ cnt = 0;
+ got_ctrlc = 0;
+ do {
+ res = au_do_update(i, sz);
+ /* let the user break out of the loop */
+ if (ctrlc() || had_ctrlc()) {
+ clear_ctrlc();
+ if (res < 0)
+ got_ctrlc = 1;
+ break;
+ }
+ cnt++;
+#ifdef AU_TEST_ONLY
+ } while (res < 0 && cnt < 3);
+ if (cnt < 3)
+#else
+ } while (res < 0);
+#endif
+ }
+ usb_stop();
+ /* restore the old state */
+ disable_ctrlc(old_ctrlc);
+ return 0;
+}
+#endif /* CONFIG_AUTO_UPDATE */
diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c
index 71a691b..67969a6 100644
--- a/board/mcc200/mcc200.c
+++ b/board/mcc200/mcc200.c
@@ -27,6 +27,7 @@
#include <common.h>
#include <mpc5xxx.h>
#include <pci.h>
+#include <asm/processor.h>
/* Two MT48LC8M32B2 for 32 MB */
/* #include "mt48lc8m32b2-6-7.h" */
@@ -43,6 +44,7 @@
extern flash_info_t flash_info[]; /* FLASH chips info */
+extern int do_auto_update(void);
ulong flash_get_size (ulong base, int banknum);
#ifndef CFG_RAMBOOT
@@ -98,6 +100,7 @@
{
ulong dramsize = 0;
ulong dramsize2 = 0;
+ uint svr, pvr;
#ifndef CFG_RAMBOOT
ulong test1, test2;
@@ -192,6 +195,22 @@
#endif /* CFG_RAMBOOT */
+ /*
+ * On MPC5200B we need to set the special configuration delay in the
+ * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
+ * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
+ *
+ * "The SDelay should be written to a value of 0x00000004. It is
+ * required to account for changes caused by normal wafer processing
+ * parameters."
+ */
+ svr = get_svr();
+ pvr = get_pvr();
+ if ((SVR_MJREV(svr) >= 2) && (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
+ *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
+ __asm__ volatile ("sync");
+ }
+
return dramsize + dramsize2;
}
@@ -209,6 +228,10 @@
{
ulong flash_sup_end, snum;
+#ifdef CONFIG_AUTO_UPDATE
+ /* this has priority over all else */
+ do_auto_update();
+#endif
/*
* Adjust flash start and offset to detected values
*/
diff --git a/board/mpc8349emds/Makefile b/board/mpc8349emds/Makefile
index acc9544..5ec7a87 100644
--- a/board/mpc8349emds/Makefile
+++ b/board/mpc8349emds/Makefile
@@ -25,7 +25,7 @@
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o
+COBJS := $(BOARD).o pci.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/mpc8349emds/mpc8349emds.c b/board/mpc8349emds/mpc8349emds.c
index b5ccb53..873bdd0 100644
--- a/board/mpc8349emds/mpc8349emds.c
+++ b/board/mpc8349emds/mpc8349emds.c
@@ -33,6 +33,10 @@
#if defined(CONFIG_SPD_EEPROM)
#include <spd_sdram.h>
#endif
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+
int fixed_sdram(void);
void sdram_init(void);
@@ -59,7 +63,7 @@
long int initdram (int board_type)
{
- volatile immap_t *im = (immap_t *)CFG_IMMRBAR;
+ volatile immap_t *im = (immap_t *)CFG_IMMR;
u32 msize = 0;
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
@@ -96,7 +100,7 @@
************************************************************************/
int fixed_sdram(void)
{
- volatile immap_t *im = (immap_t *)CFG_IMMRBAR;
+ volatile immap_t *im = (immap_t *)CFG_IMMR;
u32 msize = 0;
u32 ddr_size;
u32 ddr_size_log2;
@@ -167,8 +171,8 @@
void sdram_init(void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
- volatile lbus8349_t *lbc= &immap->lbus;
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile lbus83xx_t *lbc= &immap->lbus;
uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
puts("\n SDRAM on Local Bus: ");
@@ -245,8 +249,8 @@
*/
void ecc_print_status(void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
- volatile ddr8349_t *ddr = &immap->ddr;
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile ddr83xx_t *ddr = &immap->ddr;
printf("\nECC mode: %s\n\n", (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
@@ -320,8 +324,8 @@
int do_ecc ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
- volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
- volatile ddr8349_t *ddr = &immap->ddr;
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile ddr83xx_t *ddr = &immap->ddr;
volatile u32 val;
u64 *addr, count, val64;
register u64 *i;
@@ -564,3 +568,23 @@
" - re-inits memory"
);
#endif /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+ u32 *p;
+ int len;
+
+#ifdef CONFIG_PCI
+ ft_pci_setup(blob, bd);
+#endif
+ ft_cpu_setup(blob, bd);
+
+ p = ft_get_prop(blob, "/memory/reg", &len);
+ if (p != NULL) {
+ *p++ = cpu_to_be32(bd->bi_memstart);
+ *p = cpu_to_be32(bd->bi_memsize);
+ }
+}
+#endif
diff --git a/board/mpc8349emds/pci.c b/board/mpc8349emds/pci.c
index 63e4405..d6a12b8 100644
--- a/board/mpc8349emds/pci.c
+++ b/board/mpc8349emds/pci.c
@@ -68,12 +68,13 @@
void
pib_init(void)
{
- u8 val8;
+ u8 val8, orig_i2c_bus;
/*
* Assign PIB PMC slot to desired PCI bus
*/
- mpc8349_i2c = (i2c_t*)(CFG_IMMRBAR + CFG_I2C2_OFFSET);
- i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ /* Switch temporarily to I2C bus #2 */
+ orig_i2c_bus = i2c_get_bus_num();
+ i2c_set_bus_num(1);
val8 = 0;
i2c_write(0x23, 0x6, 1, &val8, 1);
@@ -118,6 +119,8 @@
printf("PCI1: 32-bit on PMC1, PMC2\n");
printf("PCI2: 32-bit on PMC3\n");
#endif
+ /* Reset to original I2C bus */
+ i2c_set_bus_num(orig_i2c_bus);
}
/**************************************************************************
@@ -130,18 +133,18 @@
pci_init_board(void)
{
volatile immap_t * immr;
- volatile clk8349_t * clk;
- volatile law8349_t * pci_law;
- volatile pot8349_t * pci_pot;
- volatile pcictrl8349_t * pci_ctrl;
- volatile pciconf8349_t * pci_conf;
+ volatile clk83xx_t * clk;
+ volatile law83xx_t * pci_law;
+ volatile pot83xx_t * pci_pot;
+ volatile pcictrl83xx_t * pci_ctrl;
+ volatile pciconf83xx_t * pci_conf;
u16 reg16;
u32 reg32;
u32 dev;
struct pci_controller * hose;
- immr = (immap_t *)CFG_IMMRBAR;
- clk = (clk8349_t *)&immr->clk;
+ immr = (immap_t *)CFG_IMMR;
+ clk = (clk83xx_t *)&immr->clk;
pci_law = immr->sysconf.pcilaw;
pci_pot = immr->ios.pot;
pci_ctrl = immr->pci_ctrl;
@@ -254,8 +257,8 @@
hose->region_count = 4;
pci_setup_indirect(hose,
- (CFG_IMMRBAR+0x8300),
- (CFG_IMMRBAR+0x8304));
+ (CFG_IMMR+0x8300),
+ (CFG_IMMR+0x8304));
pci_register_hose(hose);
@@ -350,8 +353,8 @@
hose->region_count = 4;
pci_setup_indirect(hose,
- (CFG_IMMRBAR+0x8380),
- (CFG_IMMRBAR+0x8384));
+ (CFG_IMMR+0x8380),
+ (CFG_IMMR+0x8384));
pci_register_hose(hose);
@@ -379,4 +382,26 @@
}
+#ifdef CONFIG_OF_FLAT_TREE
+void
+ft_pci_setup(void *blob, bd_t *bd)
+{
+ u32 *p;
+ int len;
+
+ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
+ if (p != NULL) {
+ p[0] = pci_hose[0].first_busno;
+ p[1] = pci_hose[0].last_busno;
+ }
+
+#ifdef CONFIG_MPC83XX_PCI2
+ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len);
+ if (p != NULL) {
+ p[0] = pci_hose[1].first_busno;
+ p[1] = pci_hose[1].last_busno;
+ }
+#endif
+}
+#endif /* CONFIG_OF_FLAT_TREE */
#endif /* CONFIG_PCI */
diff --git a/board/mpc8349itx/Makefile b/board/mpc8349itx/Makefile
new file mode 100644
index 0000000..31bcdb8
--- /dev/null
+++ b/board/mpc8349itx/Makefile
@@ -0,0 +1,48 @@
+#
+# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o pci.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) crv $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/mpc8349itx/config.mk b/board/mpc8349itx/config.mk
new file mode 100644
index 0000000..2e11311
--- /dev/null
+++ b/board/mpc8349itx/config.mk
@@ -0,0 +1,33 @@
+#
+# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# MPC8349ITX
+#
+
+TEXT_BASE = 0xFEF00000
+
+ifneq ($(OBJTREE),$(SRCTREE))
+# We are building u-boot in a separate directory, use generated
+# .lds script from OBJTREE directory.
+LDSCRIPT := $(OBJTREE)/board/$(BOARDDIR)/u-boot.lds
+endif
diff --git a/board/mpc8349itx/mpc8349itx.c b/board/mpc8349itx/mpc8349itx.c
new file mode 100644
index 0000000..4838e70
--- /dev/null
+++ b/board/mpc8349itx/mpc8349itx.c
@@ -0,0 +1,477 @@
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc83xx.h>
+#include <i2c.h>
+#include <spd.h>
+#include <miiphy.h>
+
+#ifdef CONFIG_PCI
+#include <asm/mpc8349_pci.h>
+#include <pci.h>
+#endif
+
+#ifdef CONFIG_SPD_EEPROM
+#include <spd_sdram.h>
+#else
+#include <asm/mmu.h>
+#endif
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+
+#ifndef CONFIG_SPD_EEPROM
+/*************************************************************************
+ * fixed sdram init -- doesn't use serial presence detect.
+ ************************************************************************/
+int fixed_sdram(void)
+{
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ u32 ddr_size; /* The size of RAM, in bytes */
+ u32 ddr_size_log2 = 0;
+
+ for (ddr_size = CFG_DDR_SIZE * 0x100000; ddr_size > 1; ddr_size >>= 1) {
+ if (ddr_size & 1) {
+ return -1;
+ }
+ ddr_size_log2++;
+ }
+
+ im->sysconf.ddrlaw[0].ar =
+ LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
+ im->sysconf.ddrlaw[0].bar = (CFG_DDR_SDRAM_BASE >> 12) & 0xfffff;
+
+ /* Only one CS0 for DDR */
+ im->ddr.csbnds[0].csbnds = 0x0000000f;
+ im->ddr.cs_config[0] = CFG_DDR_CONFIG;
+
+ debug("cs0_bnds = 0x%08x\n", im->ddr.csbnds[0].csbnds);
+ debug("cs0_config = 0x%08x\n", im->ddr.cs_config[0]);
+
+ debug("DDR:bar=0x%08x\n", im->sysconf.ddrlaw[0].bar);
+ debug("DDR:ar=0x%08x\n", im->sysconf.ddrlaw[0].ar);
+
+ im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
+ im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */
+ im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR;
+ im->ddr.sdram_mode =
+ (0x0000 << SDRAM_MODE_ESD_SHIFT) | (0x0032 << SDRAM_MODE_SD_SHIFT);
+ im->ddr.sdram_interval =
+ (0x0410 << SDRAM_INTERVAL_REFINT_SHIFT) | (0x0100 <<
+ SDRAM_INTERVAL_BSTOPRE_SHIFT);
+ im->ddr.sdram_clk_cntl =
+ DDR_SDRAM_CLK_CNTL_SS_EN | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05;
+
+ udelay(200);
+
+ im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
+
+ debug("DDR:timing_cfg_1=0x%08x\n", im->ddr.timing_cfg_1);
+ debug("DDR:timing_cfg_2=0x%08x\n", im->ddr.timing_cfg_2);
+ debug("DDR:sdram_mode=0x%08x\n", im->ddr.sdram_mode);
+ debug("DDR:sdram_interval=0x%08x\n", im->ddr.sdram_interval);
+ debug("DDR:sdram_cfg=0x%08x\n", im->ddr.sdram_cfg);
+
+ return CFG_DDR_SIZE;
+}
+#endif
+
+#ifdef CONFIG_PCI
+/*
+ * Initialize PCI Devices, report devices found
+ */
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_mpc83xxmitx_config_table[] = {
+ {
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0x0f,
+ PCI_ANY_ID,
+ pci_cfgfunc_config_device,
+ {
+ PCI_ENET0_IOADDR,
+ PCI_ENET0_MEMADDR,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}
+ },
+ {}
+}
+#endif
+
+volatile static struct pci_controller hose[] = {
+ {
+#ifndef CONFIG_PCI_PNP
+ config_table:pci_mpc83xxmitx_config_table,
+#endif
+ },
+ {
+#ifndef CONFIG_PCI_PNP
+ config_table:pci_mpc83xxmitx_config_table,
+#endif
+ }
+};
+#endif /* CONFIG_PCI */
+
+/* If MPC8349E-mITX is soldered with SDRAM, then initialize it. */
+
+void sdram_init(void)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile lbus83xx_t *lbc = &immap->lbus;
+
+#if defined(CFG_BR2_PRELIM) \
+ && defined(CFG_OR2_PRELIM) \
+ && defined(CFG_LBLAWBAR2_PRELIM) \
+ && defined(CFG_LBLAWAR2_PRELIM) \
+ && !defined(CONFIG_COMPACT_FLASH)
+
+ uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE;
+
+ puts("\n SDRAM on Local Bus: ");
+ print_size(CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+
+ /*
+ * Setup SDRAM Base and Option Registers, already done in cpu_init.c
+ */
+
+ /*setup mtrpt, lsrt and lbcr for LB bus */
+ lbc->lbcr = CFG_LBC_LBCR;
+ lbc->mrtpr = CFG_LBC_MRTPR;
+ lbc->lsrt = CFG_LBC_LSRT;
+ asm("sync");
+
+ /*
+ * Configure the SDRAM controller Machine Mode register.
+ */
+ lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */
+
+ lbc->lsdmr = CFG_LBC_LSDMR_1; /*0x68636733; precharge all the banks */
+ asm("sync");
+ *sdram_addr = 0xff;
+ udelay(100);
+
+ lbc->lsdmr = CFG_LBC_LSDMR_2; /*0x48636733; auto refresh */
+ asm("sync");
+ *sdram_addr = 0xff; /*1 time*/
+ udelay(100);
+ *sdram_addr = 0xff; /*2 times*/
+ udelay(100);
+ *sdram_addr = 0xff; /*3 times*/
+ udelay(100);
+ *sdram_addr = 0xff; /*4 times*/
+ udelay(100);
+ *sdram_addr = 0xff; /*5 times*/
+ udelay(100);
+ *sdram_addr = 0xff; /*6 times*/
+ udelay(100);
+ *sdram_addr = 0xff; /*7 times*/
+ udelay(100);
+ *sdram_addr = 0xff; /*8 times*/
+ udelay(100);
+
+ lbc->lsdmr = CFG_LBC_LSDMR_4; /*0x58636733;mode register write operation */
+ asm("sync");
+ *sdram_addr = 0xff;
+ udelay(100);
+
+ lbc->lsdmr = CFG_LBC_LSDMR_5; /*0x40636733;normal operation */
+ asm("sync");
+ *sdram_addr = 0xff;
+ udelay(100);
+
+#else
+ puts("SDRAM on Local Bus is NOT available!\n");
+
+#ifdef CFG_BR2_PRELIM
+ lbc->bank[2].br = CFG_BR2_PRELIM;
+ lbc->bank[2].or = CFG_OR2_PRELIM;
+#endif
+
+#ifdef CFG_BR3_PRELIM
+ lbc->bank[3].br = CFG_BR3_PRELIM;
+ lbc->bank[3].or = CFG_OR3_PRELIM;
+#endif
+#endif
+}
+
+long int initdram(int board_type)
+{
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ u32 msize = 0;
+#ifdef CONFIG_DDR_ECC
+ volatile ddr83xx_t *ddr = &im->ddr;
+#endif
+
+ if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
+ return -1;
+
+ /* DDR SDRAM - Main SODIMM */
+ im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+#ifdef CONFIG_SPD_EEPROM
+ msize = spd_sdram();
+#else
+ msize = fixed_sdram();
+#endif
+
+#ifdef CONFIG_DDR_ECC
+ if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN)
+ /* Unlike every other board, on the 83xx spd_sdram() returns
+ megabytes instead of just bytes. That's why we need to
+ multiple by 1MB when calling ddr_enable_ecc(). */
+ ddr_enable_ecc(msize * 1048576);
+#endif
+
+ /*
+ * Initialize SDRAM if it is on local bus.
+ */
+ sdram_init();
+ puts(" DDR RAM: ");
+ /* return total bus SDRAM size(bytes) -- DDR */
+ return msize * 1024 * 1024;
+}
+
+int checkboard(void)
+{
+ puts("Board: Freescale MPC8349E-mITX\n");
+
+ return 0;
+}
+
+/*
+ * Implement a work-around for a hardware problem with compact
+ * flash.
+ *
+ * Program the UPM if compact flash is enabled.
+ */
+int misc_init_f(void)
+{
+ volatile u32 *vsc7385_cpuctrl;
+
+ /* 0x1c0c0 is the VSC7385 CPU Control (CPUCTRL) Register. The power up
+ default of VSC7385 L1_IRQ and L2_IRQ requests are active high. That
+ means it is 0 when the IRQ is not active. This makes the wire-AND
+ logic always assert IRQ7 to CPU even if there is no request from the
+ switch. Since the compact flash and the switch share the same IRQ,
+ the Linux kernel will think that the compact flash is requesting irq
+ and get stuck when it tries to clear the IRQ. Thus we need to set
+ the L2_IRQ0 and L2_IRQ1 to active low.
+
+ The following code sets the L1_IRQ and L2_IRQ polarity to active low.
+ Without this code, compact flash will not work in Linux because
+ unlike U-Boot, Linux uses the IRQ, so this code is necessary if we
+ don't enable compact flash for U-Boot.
+ */
+
+ vsc7385_cpuctrl = (volatile u32 *)(CFG_VSC7385_BASE + 0x1c0c0);
+ *vsc7385_cpuctrl |= 0x0c;
+
+#ifdef CONFIG_COMPACT_FLASH
+ /* UPM Table Configuration Code */
+ static uint UPMATable[] = {
+ 0xcffffc00, 0x0fffff00, 0x0fafff00, 0x0fafff00,
+ 0x0faffd00, 0x0faffc04, 0x0ffffc00, 0x3ffffc01,
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfff7fc00,
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+ 0xcffffc00, 0x0fffff00, 0x0ff3ff00, 0x0ff3ff00,
+ 0x0ff3fe00, 0x0ffffc00, 0x3ffffc05, 0xfffffc00,
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01
+ };
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile lbus83xx_t *lbus = &immap->lbus;
+
+ lbus->bank[3].br = CFG_BR3_PRELIM;
+ lbus->bank[3].or = CFG_OR3_PRELIM;
+
+ /* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000,
+ GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000
+ */
+ lbus->mamr = 0x08404440;
+
+ upmconfig(0, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0]));
+
+ puts("UPMA: Configured for compact flash\n");
+#endif
+
+ return 0;
+}
+
+/*
+ * Make sure the EEPROM has the HRCW correctly programmed.
+ * Make sure the RTC is correctly programmed.
+ *
+ * The MPC8349E-mITX can be configured to load the HRCW from
+ * EEPROM instead of flash. This is controlled via jumpers
+ * LGPL0, 1, and 3. Normally, these jumpers are set to 000 (all
+ * jumpered), but if they're set to 001 or 010, then the HRCW is
+ * read from the "I2C EEPROM".
+ *
+ * This function makes sure that the I2C EEPROM is programmed
+ * correctly.
+ */
+int misc_init_r(void)
+{
+ int rc = 0;
+
+#ifdef CONFIG_HARD_I2C
+
+ unsigned int orig_bus = i2c_get_bus_num();;
+ u8 i2c_data;
+
+#ifdef CFG_I2C_RTC_ADDR
+ u8 ds1339_data[17];
+#endif
+
+#ifdef CFG_I2C_EEPROM_ADDR
+ static u8 eeprom_data[] = /* HRCW data */
+ {
+ 0xaa, 0x55, 0xaa,
+ 0x7c, 0x02, 0x40, 0x05, 0x04, 0x00, 0x00,
+ 0x7c, 0x02, 0x41, 0xb4, 0x60, 0xa0, 0x00,
+ };
+
+ u8 data[sizeof(eeprom_data)];
+#endif
+
+ printf("Board revision: ");
+ i2c_set_bus_num(1);
+ if (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0)
+ printf("%u.%u (PCF8475A)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01);
+ else if (i2c_read(CFG_I2C_8574_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0)
+ printf("%u.%u (PCF8475)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01);
+ else {
+ printf("Unknown\n");
+ rc = 1;
+ }
+
+#ifdef CFG_I2C_EEPROM_ADDR
+ i2c_set_bus_num(0);
+
+ if (i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) {
+ if (memcmp(data, eeprom_data, sizeof(data)) != 0) {
+ if (i2c_write
+ (CFG_I2C_EEPROM_ADDR, 0, 2, eeprom_data,
+ sizeof(eeprom_data)) != 0) {
+ puts("Failure writing the HRCW to EEPROM via I2C.\n");
+ rc = 1;
+ }
+ }
+ } else {
+ puts("Failure reading the HRCW from EEPROM via I2C.\n");
+ rc = 1;
+ }
+#endif
+
+#ifdef CFG_I2C_RTC_ADDR
+ i2c_set_bus_num(1);
+
+ if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data))
+ == 0) {
+
+ /* Work-around for MPC8349E-mITX bug #13601.
+ If the RTC does not contain valid register values, the DS1339
+ Linux driver will not work.
+ */
+
+ /* Make sure status register bits 6-2 are zero */
+ ds1339_data[0x0f] &= ~0x7c;
+
+ /* Check for a valid day register value */
+ ds1339_data[0x03] &= ~0xf8;
+ if (ds1339_data[0x03] == 0) {
+ ds1339_data[0x03] = 1;
+ }
+
+ /* Check for a valid date register value */
+ ds1339_data[0x04] &= ~0xc0;
+ if ((ds1339_data[0x04] == 0) ||
+ ((ds1339_data[0x04] & 0x0f) > 9) ||
+ (ds1339_data[0x04] >= 0x32)) {
+ ds1339_data[0x04] = 1;
+ }
+
+ /* Check for a valid month register value */
+ ds1339_data[0x05] &= ~0x60;
+
+ if ((ds1339_data[0x05] == 0) ||
+ ((ds1339_data[0x05] & 0x0f) > 9) ||
+ ((ds1339_data[0x05] >= 0x13)
+ && (ds1339_data[0x05] <= 0x19))) {
+ ds1339_data[0x05] = 1;
+ }
+
+ /* Enable Oscillator and rate select */
+ ds1339_data[0x0e] = 0x1c;
+
+ /* Work-around for MPC8349E-mITX bug #13330.
+ Ensure that the RTC control register contains the value 0x1c.
+ This affects SATA performance.
+ */
+
+ if (i2c_write
+ (CFG_I2C_RTC_ADDR, 0, 1, ds1339_data,
+ sizeof(ds1339_data))) {
+ puts("Failure writing to the RTC via I2C.\n");
+ rc = 1;
+ }
+ } else {
+ puts("Failure reading from the RTC via I2C.\n");
+ rc = 1;
+ }
+#endif
+
+ i2c_set_bus_num(orig_bus);
+#endif
+
+ return rc;
+}
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+ u32 *p;
+ int len;
+
+#ifdef CONFIG_PCI
+ ft_pci_setup(blob, bd);
+#endif
+ ft_cpu_setup(blob, bd);
+
+ p = ft_get_prop(blob, "/memory/reg", &len);
+ if (p != NULL) {
+ *p++ = cpu_to_be32(bd->bi_memstart);
+ *p = cpu_to_be32(bd->bi_memsize);
+ }
+}
+#endif
diff --git a/board/mpc8349itx/pci.c b/board/mpc8349itx/pci.c
new file mode 100644
index 0000000..e81ad27
--- /dev/null
+++ b/board/mpc8349itx/pci.c
@@ -0,0 +1,357 @@
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_PCI
+
+#include <asm/mmu.h>
+#include <asm/global_data.h>
+#include <pci.h>
+#include <asm/mpc8349_pci.h>
+#include <i2c.h>
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* System RAM mapped to PCI space */
+#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE
+
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_mpc8349itx_config_table[] = {
+ {
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ PCI_IDSEL_NUMBER,
+ PCI_ANY_ID,
+ pci_cfgfunc_config_device,
+ {
+ PCI_ENET0_IOADDR,
+ PCI_ENET0_MEMADDR,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}
+ },
+ {}
+};
+#endif
+
+static struct pci_controller pci_hose[] = {
+ {
+#ifndef CONFIG_PCI_PNP
+ config_table:pci_mpc8349itx_config_table,
+#endif
+ },
+ {
+#ifndef CONFIG_PCI_PNP
+ config_table:pci_mpc8349itx_config_table,
+#endif
+ }
+};
+
+/**************************************************************************
+ * pci_init_board()
+ *
+ * NOTICE: PCI2 is not currently supported
+ *
+ */
+void pci_init_board(void)
+{
+ volatile immap_t *immr;
+ volatile clk83xx_t *clk;
+ volatile law83xx_t *pci_law;
+ volatile pot83xx_t *pci_pot;
+ volatile pcictrl83xx_t *pci_ctrl;
+ volatile pciconf83xx_t *pci_conf;
+ u8 reg8;
+ u16 reg16;
+ u32 reg32;
+ u32 dev;
+ struct pci_controller *hose;
+
+ immr = (immap_t *) CFG_IMMR;
+ clk = (clk83xx_t *) & immr->clk;
+ pci_law = immr->sysconf.pcilaw;
+ pci_pot = immr->ios.pot;
+ pci_ctrl = immr->pci_ctrl;
+ pci_conf = immr->pci_conf;
+
+ hose = &pci_hose[0];
+
+ /*
+ * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode
+ */
+
+ reg32 = clk->occr;
+ udelay(2000);
+
+#ifdef CONFIG_HARD_I2C
+ i2c_set_bus_num(1);
+ /* Read the PCI_M66EN jumper setting */
+ if ((i2c_read(CFG_I2C_8574_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0) ||
+ (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0)) {
+ if (reg8 & I2C_8574_PCI66)
+ clk->occr = 0xff000000; /* 66 MHz PCI */
+ else
+ clk->occr = 0xff600001; /* 33 MHz PCI */
+ } else {
+ clk->occr = 0xff600001; /* 33 MHz PCI */
+ }
+#else
+ clk->occr = 0xff000000; /* 66 MHz PCI */
+#endif
+
+ udelay(2000);
+
+ /*
+ * Release PCI RST Output signal
+ */
+ pci_ctrl[0].gcr = 0;
+ udelay(2000);
+ pci_ctrl[0].gcr = 1;
+
+#ifdef CONFIG_MPC83XX_PCI2
+ pci_ctrl[1].gcr = 0;
+ udelay(2000);
+ pci_ctrl[1].gcr = 1;
+#endif
+
+ /* We need to wait at least a 1sec based on PCI specs */
+ {
+ int i;
+
+ for (i = 0; i < 1000; i++)
+ udelay(1000);
+ }
+
+ /*
+ * Configure PCI Local Access Windows
+ */
+ pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
+ pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;
+
+ pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
+ pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_32M;
+
+ /*
+ * Configure PCI Outbound Translation Windows
+ */
+
+ /* PCI1 mem space - prefetch */
+ pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | POCMR_CM_256M;
+
+ /* PCI1 IO space */
+ pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[1].pocmr = POCMR_EN | POCMR_IO | POCMR_CM_16M;
+
+ /* PCI1 mmio - non-prefetch mem space */
+ pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[2].pocmr = POCMR_EN | POCMR_CM_256M;
+
+ /*
+ * Configure PCI Inbound Translation Windows
+ */
+
+ /* we need RAM mapped to PCI space for the devices to
+ * access main memory */
+ pci_ctrl[0].pitar1 = 0x0;
+ pci_ctrl[0].pibar1 = 0x0;
+ pci_ctrl[0].piebar1 = 0x0;
+ pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
+ PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1);
+
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+
+ /* PCI memory prefetch space */
+ pci_set_region(hose->regions + 0,
+ CFG_PCI1_MEM_BASE,
+ CFG_PCI1_MEM_PHYS,
+ CFG_PCI1_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
+
+ /* PCI memory space */
+ pci_set_region(hose->regions + 1,
+ CFG_PCI1_MMIO_BASE,
+ CFG_PCI1_MMIO_PHYS, CFG_PCI1_MMIO_SIZE, PCI_REGION_MEM);
+
+ /* PCI IO space */
+ pci_set_region(hose->regions + 2,
+ CFG_PCI1_IO_BASE,
+ CFG_PCI1_IO_PHYS, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
+
+ /* System memory space */
+ pci_set_region(hose->regions + 3,
+ CONFIG_PCI_SYS_MEM_BUS,
+ CONFIG_PCI_SYS_MEM_PHYS,
+ gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ hose->region_count = 4;
+
+ pci_setup_indirect(hose,
+ (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));
+
+ pci_register_hose(hose);
+
+ /*
+ * Write to Command register
+ */
+ reg16 = 0xff;
+ dev = PCI_BDF(hose->first_busno, 0, 0);
+ pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16);
+ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
+
+ /*
+ * Clear non-reserved bits in status register.
+ */
+ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
+ pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
+ pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
+
+#ifdef CONFIG_PCI_SCAN_SHOW
+ printf("PCI: Bus Dev VenId DevId Class Int\n");
+#endif
+ /*
+ * Hose scan.
+ */
+ hose->last_busno = pci_hose_scan(hose);
+
+#ifdef CONFIG_MPC83XX_PCI2
+ hose = &pci_hose[1];
+
+ /*
+ * Configure PCI Outbound Translation Windows
+ */
+
+ /* PCI2 mem space - prefetch */
+ pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | POCMR_CM_256M;
+
+ /* PCI2 IO space */
+ pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | POCMR_CM_16M;
+
+ /* PCI2 mmio - non-prefetch mem space */
+ pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_CM_256M;
+
+ /*
+ * Configure PCI Inbound Translation Windows
+ */
+
+ /* we need RAM mapped to PCI space for the devices to
+ * access main memory */
+ pci_ctrl[1].pitar1 = 0x0;
+ pci_ctrl[1].pibar1 = 0x0;
+ pci_ctrl[1].piebar1 = 0x0;
+ pci_ctrl[1].piwar1 =
+ PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP |
+ (__ilog2(gd->ram_size) - 1);
+
+ hose->first_busno = pci_hose[0].last_busno + 1;
+ hose->last_busno = 0xff;
+
+ /* PCI memory prefetch space */
+ pci_set_region(hose->regions + 0,
+ CFG_PCI2_MEM_BASE,
+ CFG_PCI2_MEM_PHYS,
+ CFG_PCI2_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
+
+ /* PCI memory space */
+ pci_set_region(hose->regions + 1,
+ CFG_PCI2_MMIO_BASE,
+ CFG_PCI2_MMIO_PHYS, CFG_PCI2_MMIO_SIZE, PCI_REGION_MEM);
+
+ /* PCI IO space */
+ pci_set_region(hose->regions + 2,
+ CFG_PCI2_IO_BASE,
+ CFG_PCI2_IO_PHYS, CFG_PCI2_IO_SIZE, PCI_REGION_IO);
+
+ /* System memory space */
+ pci_set_region(hose->regions + 3,
+ CONFIG_PCI_SYS_MEM_BUS,
+ CONFIG_PCI_SYS_MEM_PHYS,
+ gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ hose->region_count = 4;
+
+ pci_setup_indirect(hose,
+ (CFG_IMMR + 0x8380), (CFG_IMMR + 0x8384));
+
+ pci_register_hose(hose);
+
+ /*
+ * Write to Command register
+ */
+ reg16 = 0xff;
+ dev = PCI_BDF(hose->first_busno, 0, 0);
+ pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16);
+ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
+
+ /*
+ * Clear non-reserved bits in status register.
+ */
+ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
+ pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
+ pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
+
+ /*
+ * Hose scan.
+ */
+ hose->last_busno = pci_hose_scan(hose);
+#endif
+}
+
+#endif /* CONFIG_PCI */
+#ifdef CONFIG_OF_FLAT_TREE
+void
+ft_pci_setup(void *blob, bd_t *bd)
+{
+ u32 *p;
+ int len;
+
+ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
+ if (p != NULL) {
+ p[0] = pci_hose[0].first_busno;
+ p[1] = pci_hose[0].last_busno;
+ }
+
+#ifdef CONFIG_MPC83XX_PCI2
+ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len);
+ if (p != NULL) {
+ p[0] = pci_hose[1].first_busno;
+ p[1] = pci_hose[1].last_busno;
+ }
+#endif
+}
+#endif /* CONFIG_OF_FLAT_TREE */
diff --git a/board/mpc8349itx/u-boot.lds b/board/mpc8349itx/u-boot.lds
new file mode 100644
index 0000000..f044c0f
--- /dev/null
+++ b/board/mpc8349itx/u-boot.lds
@@ -0,0 +1,120 @@
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc83xx/start.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
+ENTRY(_start)
diff --git a/board/mpc8360emds/Makefile b/board/mpc8360emds/Makefile
new file mode 100644
index 0000000..5ec7a87
--- /dev/null
+++ b/board/mpc8360emds/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o pci.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/mpc8360emds/config.mk b/board/mpc8360emds/config.mk
new file mode 100644
index 0000000..9ace886
--- /dev/null
+++ b/board/mpc8360emds/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# MPC8360EMDS
+#
+
+TEXT_BASE = 0xFE000000
diff --git a/board/mpc8360emds/mpc8360emds.c b/board/mpc8360emds/mpc8360emds.c
new file mode 100644
index 0000000..ddc1047
--- /dev/null
+++ b/board/mpc8360emds/mpc8360emds.c
@@ -0,0 +1,657 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ * based on board/mpc8349emds/mpc8349emds.c
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc83xx.h>
+#include <i2c.h>
+#include <spd.h>
+#include <miiphy.h>
+#include <command.h>
+#if defined(CONFIG_PCI)
+#include <pci.h>
+#endif
+#if defined(CONFIG_SPD_EEPROM)
+#include <spd_sdram.h>
+#else
+#include <asm/mmu.h>
+#endif
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+
+const qe_iop_conf_t qe_iop_conf_tab[] = {
+ /* GETH1 */
+ {0, 3, 1, 0, 1}, /* TxD0 */
+ {0, 4, 1, 0, 1}, /* TxD1 */
+ {0, 5, 1, 0, 1}, /* TxD2 */
+ {0, 6, 1, 0, 1}, /* TxD3 */
+ {1, 6, 1, 0, 3}, /* TxD4 */
+ {1, 7, 1, 0, 1}, /* TxD5 */
+ {1, 9, 1, 0, 2}, /* TxD6 */
+ {1, 10, 1, 0, 2}, /* TxD7 */
+ {0, 9, 2, 0, 1}, /* RxD0 */
+ {0, 10, 2, 0, 1}, /* RxD1 */
+ {0, 11, 2, 0, 1}, /* RxD2 */
+ {0, 12, 2, 0, 1}, /* RxD3 */
+ {0, 13, 2, 0, 1}, /* RxD4 */
+ {1, 1, 2, 0, 2}, /* RxD5 */
+ {1, 0, 2, 0, 2}, /* RxD6 */
+ {1, 4, 2, 0, 2}, /* RxD7 */
+ {0, 7, 1, 0, 1}, /* TX_EN */
+ {0, 8, 1, 0, 1}, /* TX_ER */
+ {0, 15, 2, 0, 1}, /* RX_DV */
+ {0, 16, 2, 0, 1}, /* RX_ER */
+ {0, 0, 2, 0, 1}, /* RX_CLK */
+ {2, 9, 1, 0, 3}, /* GTX_CLK - CLK10 */
+ {2, 8, 2, 0, 1}, /* GTX125 - CLK9 */
+ /* GETH2 */
+ {0, 17, 1, 0, 1}, /* TxD0 */
+ {0, 18, 1, 0, 1}, /* TxD1 */
+ {0, 19, 1, 0, 1}, /* TxD2 */
+ {0, 20, 1, 0, 1}, /* TxD3 */
+ {1, 2, 1, 0, 1}, /* TxD4 */
+ {1, 3, 1, 0, 2}, /* TxD5 */
+ {1, 5, 1, 0, 3}, /* TxD6 */
+ {1, 8, 1, 0, 3}, /* TxD7 */
+ {0, 23, 2, 0, 1}, /* RxD0 */
+ {0, 24, 2, 0, 1}, /* RxD1 */
+ {0, 25, 2, 0, 1}, /* RxD2 */
+ {0, 26, 2, 0, 1}, /* RxD3 */
+ {0, 27, 2, 0, 1}, /* RxD4 */
+ {1, 12, 2, 0, 2}, /* RxD5 */
+ {1, 13, 2, 0, 3}, /* RxD6 */
+ {1, 11, 2, 0, 2}, /* RxD7 */
+ {0, 21, 1, 0, 1}, /* TX_EN */
+ {0, 22, 1, 0, 1}, /* TX_ER */
+ {0, 29, 2, 0, 1}, /* RX_DV */
+ {0, 30, 2, 0, 1}, /* RX_ER */
+ {0, 31, 2, 0, 1}, /* RX_CLK */
+ {2, 2, 1, 0, 2}, /* GTX_CLK = CLK10 */
+ {2, 3, 2, 0, 1}, /* GTX125 - CLK4 */
+
+ {0, 1, 3, 0, 2}, /* MDIO */
+ {0, 2, 1, 0, 1}, /* MDC */
+
+ {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */
+};
+
+int board_early_init_f(void)
+{
+ volatile u8 *bcsr = (volatile u8 *)CFG_BCSR;
+
+ /* Enable flash write */
+ bcsr[0xa] &= ~0x04;
+
+ return 0;
+}
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
+extern void ddr_enable_ecc(unsigned int dram_size);
+#endif
+int fixed_sdram(void);
+void sdram_init(void);
+
+long int initdram(int board_type)
+{
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ u32 msize = 0;
+
+ if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
+ return -1;
+
+ /* DDR SDRAM - Main SODIMM */
+ im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+#if defined(CONFIG_SPD_EEPROM)
+ msize = spd_sdram();
+#else
+ msize = fixed_sdram();
+#endif
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
+ /*
+ * Initialize DDR ECC byte
+ */
+ ddr_enable_ecc(msize * 1024 * 1024);
+#endif
+ /*
+ * Initialize SDRAM if it is on local bus.
+ */
+ sdram_init();
+ puts(" DDR RAM: ");
+ /* return total bus SDRAM size(bytes) -- DDR */
+ return (msize * 1024 * 1024);
+}
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*************************************************************************
+ * fixed sdram init -- doesn't use serial presence detect.
+ ************************************************************************/
+int fixed_sdram(void)
+{
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ u32 msize = 0;
+ u32 ddr_size;
+ u32 ddr_size_log2;
+
+ msize = CFG_DDR_SIZE;
+ for (ddr_size = msize << 20, ddr_size_log2 = 0;
+ (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
+ if (ddr_size & 1) {
+ return -1;
+ }
+ }
+ im->sysconf.ddrlaw[0].ar =
+ LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
+#if (CFG_DDR_SIZE != 256)
+#warning Currenly any ddr size other than 256 is not supported
+#endif
+ im->ddr.csbnds[0].csbnds = 0x00000007;
+ im->ddr.csbnds[1].csbnds = 0x0008000f;
+
+ im->ddr.cs_config[0] = CFG_DDR_CONFIG;
+ im->ddr.cs_config[1] = CFG_DDR_CONFIG;
+
+ im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
+ im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
+ im->ddr.sdram_cfg = CFG_DDR_CONTROL;
+
+ im->ddr.sdram_mode = CFG_DDR_MODE;
+ im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+ udelay(200);
+ im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
+
+ return msize;
+}
+#endif /*!CFG_SPD_EEPROM */
+
+int checkboard(void)
+{
+ puts("Board: Freescale MPC8360EMDS\n");
+ return 0;
+}
+
+/*
+ * if MPC8360EMDS is soldered with SDRAM
+ */
+#if defined(CFG_BR2_PRELIM) \
+ && defined(CFG_OR2_PRELIM) \
+ && defined(CFG_LBLAWBAR2_PRELIM) \
+ && defined(CFG_LBLAWAR2_PRELIM)
+/*
+ * Initialize SDRAM memory on the Local Bus.
+ */
+
+void sdram_init(void)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile lbus83xx_t *lbc = &immap->lbus;
+ uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE;
+
+ puts("\n SDRAM on Local Bus: ");
+ print_size(CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+ /*
+ * Setup SDRAM Base and Option Registers, already done in cpu_init.c
+ */
+ /*setup mtrpt, lsrt and lbcr for LB bus */
+ lbc->lbcr = CFG_LBC_LBCR;
+ lbc->mrtpr = CFG_LBC_MRTPR;
+ lbc->lsrt = CFG_LBC_LSRT;
+ asm("sync");
+
+ /*
+ * Configure the SDRAM controller Machine Mode Register.
+ */
+ lbc->lsdmr = CFG_LBC_LSDMR_5; /* Normal Operation */
+ lbc->lsdmr = CFG_LBC_LSDMR_1; /* Precharge All Banks */
+ asm("sync");
+ *sdram_addr = 0xff;
+ udelay(100);
+
+ /*
+ * We need do 8 times auto refresh operation.
+ */
+ lbc->lsdmr = CFG_LBC_LSDMR_2;
+ asm("sync");
+ *sdram_addr = 0xff; /* 1 times */
+ udelay(100);
+ *sdram_addr = 0xff; /* 2 times */
+ udelay(100);
+ *sdram_addr = 0xff; /* 3 times */
+ udelay(100);
+ *sdram_addr = 0xff; /* 4 times */
+ udelay(100);
+ *sdram_addr = 0xff; /* 5 times */
+ udelay(100);
+ *sdram_addr = 0xff; /* 6 times */
+ udelay(100);
+ *sdram_addr = 0xff; /* 7 times */
+ udelay(100);
+ *sdram_addr = 0xff; /* 8 times */
+ udelay(100);
+
+ /* Mode register write operation */
+ lbc->lsdmr = CFG_LBC_LSDMR_4;
+ asm("sync");
+ *(sdram_addr + 0xcc) = 0xff;
+ udelay(100);
+
+ /* Normal operation */
+ lbc->lsdmr = CFG_LBC_LSDMR_5 | 0x40000000;
+ asm("sync");
+ *sdram_addr = 0xff;
+ udelay(100);
+}
+#else
+void sdram_init(void)
+{
+ puts("SDRAM on Local Bus is NOT available!\n");
+}
+#endif
+
+#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
+/*
+ * ECC user commands
+ */
+void ecc_print_status(void)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile ddr83xx_t *ddr = &immap->ddr;
+
+ printf("\nECC mode: %s\n\n",
+ (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
+
+ /* Interrupts */
+ printf("Memory Error Interrupt Enable:\n");
+ printf(" Multiple-Bit Error Interrupt Enable: %d\n",
+ (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
+ printf(" Single-Bit Error Interrupt Enable: %d\n",
+ (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
+ printf(" Memory Select Error Interrupt Enable: %d\n\n",
+ (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
+
+ /* Error disable */
+ printf("Memory Error Disable:\n");
+ printf(" Multiple-Bit Error Disable: %d\n",
+ (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
+ printf(" Sinle-Bit Error Disable: %d\n",
+ (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
+ printf(" Memory Select Error Disable: %d\n\n",
+ (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
+
+ /* Error injection */
+ printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n",
+ ddr->data_err_inject_hi, ddr->data_err_inject_lo);
+
+ printf("Memory Data Path Error Injection Mask ECC:\n");
+ printf(" ECC Mirror Byte: %d\n",
+ (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
+ printf(" ECC Injection Enable: %d\n",
+ (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
+ printf(" ECC Error Injection Mask: 0x%02x\n\n",
+ ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
+
+ /* SBE counter/threshold */
+ printf("Memory Single-Bit Error Management (0..255):\n");
+ printf(" Single-Bit Error Threshold: %d\n",
+ (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
+ printf(" Single-Bit Error Counter: %d\n\n",
+ (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
+
+ /* Error detect */
+ printf("Memory Error Detect:\n");
+ printf(" Multiple Memory Errors: %d\n",
+ (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
+ printf(" Multiple-Bit Error: %d\n",
+ (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
+ printf(" Single-Bit Error: %d\n",
+ (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
+ printf(" Memory Select Error: %d\n\n",
+ (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
+
+ /* Capture data */
+ printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address);
+ printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n",
+ ddr->capture_data_hi, ddr->capture_data_lo);
+ printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
+ ddr->capture_ecc & CAPTURE_ECC_ECE);
+
+ printf("Memory Error Attributes Capture:\n");
+ printf(" Data Beat Number: %d\n",
+ (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >>
+ ECC_CAPT_ATTR_BNUM_SHIFT);
+ printf(" Transaction Size: %d\n",
+ (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >>
+ ECC_CAPT_ATTR_TSIZ_SHIFT);
+ printf(" Transaction Source: %d\n",
+ (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >>
+ ECC_CAPT_ATTR_TSRC_SHIFT);
+ printf(" Transaction Type: %d\n",
+ (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >>
+ ECC_CAPT_ATTR_TTYP_SHIFT);
+ printf(" Error Information Valid: %d\n\n",
+ ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
+}
+
+int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile ddr83xx_t *ddr = &immap->ddr;
+ volatile u32 val;
+ u64 *addr;
+ u32 count;
+ register u64 *i;
+ u32 ret[2];
+ u32 pattern[2];
+ u32 writeback[2];
+
+ /* The pattern is written into memory to generate error */
+ pattern[0] = 0xfedcba98UL;
+ pattern[1] = 0x76543210UL;
+
+ /* After injecting error, re-initialize the memory with the value */
+ writeback[0] = 0x01234567UL;
+ writeback[1] = 0x89abcdefUL;
+
+ if (argc > 4) {
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ if (argc == 2) {
+ if (strcmp(argv[1], "status") == 0) {
+ ecc_print_status();
+ return 0;
+ } else if (strcmp(argv[1], "captureclear") == 0) {
+ ddr->capture_address = 0;
+ ddr->capture_data_hi = 0;
+ ddr->capture_data_lo = 0;
+ ddr->capture_ecc = 0;
+ ddr->capture_attributes = 0;
+ return 0;
+ }
+ }
+ if (argc == 3) {
+ if (strcmp(argv[1], "sbecnt") == 0) {
+ val = simple_strtoul(argv[2], NULL, 10);
+ if (val > 255) {
+ printf("Incorrect Counter value, "
+ "should be 0..255\n");
+ return 1;
+ }
+
+ val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
+ val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
+
+ ddr->err_sbe = val;
+ return 0;
+ } else if (strcmp(argv[1], "sbethr") == 0) {
+ val = simple_strtoul(argv[2], NULL, 10);
+ if (val > 255) {
+ printf("Incorrect Counter value, "
+ "should be 0..255\n");
+ return 1;
+ }
+
+ val = (val << ECC_ERROR_MAN_SBET_SHIFT);
+ val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
+
+ ddr->err_sbe = val;
+ return 0;
+ } else if (strcmp(argv[1], "errdisable") == 0) {
+ val = ddr->err_disable;
+
+ if (strcmp(argv[2], "+sbe") == 0) {
+ val |= ECC_ERROR_DISABLE_SBED;
+ } else if (strcmp(argv[2], "+mbe") == 0) {
+ val |= ECC_ERROR_DISABLE_MBED;
+ } else if (strcmp(argv[2], "+mse") == 0) {
+ val |= ECC_ERROR_DISABLE_MSED;
+ } else if (strcmp(argv[2], "+all") == 0) {
+ val |= (ECC_ERROR_DISABLE_SBED |
+ ECC_ERROR_DISABLE_MBED |
+ ECC_ERROR_DISABLE_MSED);
+ } else if (strcmp(argv[2], "-sbe") == 0) {
+ val &= ~ECC_ERROR_DISABLE_SBED;
+ } else if (strcmp(argv[2], "-mbe") == 0) {
+ val &= ~ECC_ERROR_DISABLE_MBED;
+ } else if (strcmp(argv[2], "-mse") == 0) {
+ val &= ~ECC_ERROR_DISABLE_MSED;
+ } else if (strcmp(argv[2], "-all") == 0) {
+ val &= ~(ECC_ERROR_DISABLE_SBED |
+ ECC_ERROR_DISABLE_MBED |
+ ECC_ERROR_DISABLE_MSED);
+ } else {
+ printf("Incorrect err_disable field\n");
+ return 1;
+ }
+
+ ddr->err_disable = val;
+ __asm__ __volatile__("sync");
+ __asm__ __volatile__("isync");
+ return 0;
+ } else if (strcmp(argv[1], "errdetectclr") == 0) {
+ val = ddr->err_detect;
+
+ if (strcmp(argv[2], "mme") == 0) {
+ val |= ECC_ERROR_DETECT_MME;
+ } else if (strcmp(argv[2], "sbe") == 0) {
+ val |= ECC_ERROR_DETECT_SBE;
+ } else if (strcmp(argv[2], "mbe") == 0) {
+ val |= ECC_ERROR_DETECT_MBE;
+ } else if (strcmp(argv[2], "mse") == 0) {
+ val |= ECC_ERROR_DETECT_MSE;
+ } else if (strcmp(argv[2], "all") == 0) {
+ val |= (ECC_ERROR_DETECT_MME |
+ ECC_ERROR_DETECT_MBE |
+ ECC_ERROR_DETECT_SBE |
+ ECC_ERROR_DETECT_MSE);
+ } else {
+ printf("Incorrect err_detect field\n");
+ return 1;
+ }
+
+ ddr->err_detect = val;
+ return 0;
+ } else if (strcmp(argv[1], "injectdatahi") == 0) {
+ val = simple_strtoul(argv[2], NULL, 16);
+
+ ddr->data_err_inject_hi = val;
+ return 0;
+ } else if (strcmp(argv[1], "injectdatalo") == 0) {
+ val = simple_strtoul(argv[2], NULL, 16);
+
+ ddr->data_err_inject_lo = val;
+ return 0;
+ } else if (strcmp(argv[1], "injectecc") == 0) {
+ val = simple_strtoul(argv[2], NULL, 16);
+ if (val > 0xff) {
+ printf("Incorrect ECC inject mask, "
+ "should be 0x00..0xff\n");
+ return 1;
+ }
+ val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
+
+ ddr->ecc_err_inject = val;
+ return 0;
+ } else if (strcmp(argv[1], "inject") == 0) {
+ val = ddr->ecc_err_inject;
+
+ if (strcmp(argv[2], "en") == 0)
+ val |= ECC_ERR_INJECT_EIEN;
+ else if (strcmp(argv[2], "dis") == 0)
+ val &= ~ECC_ERR_INJECT_EIEN;
+ else
+ printf("Incorrect command\n");
+
+ ddr->ecc_err_inject = val;
+ __asm__ __volatile__("sync");
+ __asm__ __volatile__("isync");
+ return 0;
+ } else if (strcmp(argv[1], "mirror") == 0) {
+ val = ddr->ecc_err_inject;
+
+ if (strcmp(argv[2], "en") == 0)
+ val |= ECC_ERR_INJECT_EMB;
+ else if (strcmp(argv[2], "dis") == 0)
+ val &= ~ECC_ERR_INJECT_EMB;
+ else
+ printf("Incorrect command\n");
+
+ ddr->ecc_err_inject = val;
+ return 0;
+ }
+ }
+ if (argc == 4) {
+ if (strcmp(argv[1], "testdw") == 0) {
+ addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
+ count = simple_strtoul(argv[3], NULL, 16);
+
+ if ((u32) addr % 8) {
+ printf("Address not alligned on "
+ "double word boundary\n");
+ return 1;
+ }
+ disable_interrupts();
+
+ for (i = addr; i < addr + count; i++) {
+
+ /* enable injects */
+ ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
+ __asm__ __volatile__("sync");
+ __asm__ __volatile__("isync");
+
+ /* write memory location injecting errors */
+ ppcDWstore((u32 *) i, pattern);
+ __asm__ __volatile__("sync");
+
+ /* disable injects */
+ ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
+ __asm__ __volatile__("sync");
+ __asm__ __volatile__("isync");
+
+ /* read data, this generates ECC error */
+ ppcDWload((u32 *) i, ret);
+ __asm__ __volatile__("sync");
+
+ /* re-initialize memory, double word write the location again,
+ * generates new ECC code this time */
+ ppcDWstore((u32 *) i, writeback);
+ __asm__ __volatile__("sync");
+ }
+ enable_interrupts();
+ return 0;
+ }
+ if (strcmp(argv[1], "testword") == 0) {
+ addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
+ count = simple_strtoul(argv[3], NULL, 16);
+
+ if ((u32) addr % 8) {
+ printf("Address not alligned on "
+ "double word boundary\n");
+ return 1;
+ }
+ disable_interrupts();
+
+ for (i = addr; i < addr + count; i++) {
+
+ /* enable injects */
+ ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
+ __asm__ __volatile__("sync");
+ __asm__ __volatile__("isync");
+
+ /* write memory location injecting errors */
+ *(u32 *) i = 0xfedcba98UL;
+ __asm__ __volatile__("sync");
+
+ /* sub double word write,
+ * bus will read-modify-write,
+ * generates ECC error */
+ *((u32 *) i + 1) = 0x76543210UL;
+ __asm__ __volatile__("sync");
+
+ /* disable injects */
+ ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
+ __asm__ __volatile__("sync");
+ __asm__ __volatile__("isync");
+
+ /* re-initialize memory,
+ * double word write the location again,
+ * generates new ECC code this time */
+ ppcDWstore((u32 *) i, writeback);
+ __asm__ __volatile__("sync");
+ }
+ enable_interrupts();
+ return 0;
+ }
+ }
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+}
+
+U_BOOT_CMD(ecc, 4, 0, do_ecc,
+ "ecc - support for DDR ECC features\n",
+ "status - print out status info\n"
+ "ecc captureclear - clear capture regs data\n"
+ "ecc sbecnt <val> - set Single-Bit Error counter\n"
+ "ecc sbethr <val> - set Single-Bit Threshold\n"
+ "ecc errdisable <flag> - clear/set disable Memory Error Disable, flag:\n"
+ " [-|+]sbe - Single-Bit Error\n"
+ " [-|+]mbe - Multiple-Bit Error\n"
+ " [-|+]mse - Memory Select Error\n"
+ " [-|+]all - all errors\n"
+ "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
+ " mme - Multiple Memory Errors\n"
+ " sbe - Single-Bit Error\n"
+ " mbe - Multiple-Bit Error\n"
+ " mse - Memory Select Error\n"
+ " all - all errors\n"
+ "ecc injectdatahi <hi> - set Memory Data Path Error Injection Mask High\n"
+ "ecc injectdatalo <lo> - set Memory Data Path Error Injection Mask Low\n"
+ "ecc injectecc <ecc> - set ECC Error Injection Mask\n"
+ "ecc inject <en|dis> - enable/disable error injection\n"
+ "ecc mirror <en|dis> - enable/disable mirror byte\n"
+ "ecc testdw <addr> <cnt> - test mem region with double word access:\n"
+ " - enables injects\n"
+ " - writes pattern injecting errors with double word access\n"
+ " - disables injects\n"
+ " - reads pattern back with double word access, generates error\n"
+ " - re-inits memory\n"
+ "ecc testword <addr> <cnt> - test mem region with word access:\n"
+ " - enables injects\n"
+ " - writes pattern injecting errors with word access\n"
+ " - writes pattern with word access, generates error\n"
+ " - disables injects\n" " - re-inits memory");
+#endif /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+ u32 *p;
+ int len;
+
+#ifdef CONFIG_PCI
+ ft_pci_setup(blob, bd);
+#endif
+ ft_cpu_setup(blob, bd);
+
+ p = ft_get_prop(blob, "/memory/reg", &len);
+ if (p != NULL) {
+ *p++ = cpu_to_be32(bd->bi_memstart);
+ *p = cpu_to_be32(bd->bi_memsize);
+ }
+}
+#endif
diff --git a/board/mpc8360emds/pci.c b/board/mpc8360emds/pci.c
new file mode 100644
index 0000000..15a48dc
--- /dev/null
+++ b/board/mpc8360emds/pci.c
@@ -0,0 +1,313 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/*
+ * PCI Configuration space access support for MPC83xx PCI Bridge
+ */
+#include <asm/mmu.h>
+#include <asm/io.h>
+#include <common.h>
+#include <pci.h>
+#include <i2c.h>
+
+#include <asm/fsl_i2c.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_PCI)
+#define PCI_FUNCTION_CONFIG 0x44
+#define PCI_FUNCTION_CFG_LOCK 0x20
+
+/*
+ * Initialize PCI Devices, report devices found
+ */
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_mpc83xxemds_config_table[] = {
+ {
+ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ pci_cfgfunc_config_device,
+ {PCI_ENET0_IOADDR,
+ PCI_ENET0_MEMADDR,
+ PCI_COMMON_MEMORY | PCI_COMMAND_MASTER}
+ },
+ {}
+}
+#endif
+static struct pci_controller hose[] = {
+ {
+#ifndef CONFIG_PCI_PNP
+ config_table:pci_mpc83xxemds_config_table,
+#endif
+ },
+};
+
+/**********************************************************************
+ * pci_init_board()
+ *********************************************************************/
+void pci_init_board(void)
+#ifdef CONFIG_PCISLAVE
+{
+ u16 reg16;
+ volatile immap_t *immr;
+ volatile law83xx_t *pci_law;
+ volatile pot83xx_t *pci_pot;
+ volatile pcictrl83xx_t *pci_ctrl;
+ volatile pciconf83xx_t *pci_conf;
+
+ immr = (immap_t *) CFG_IMMR;
+ pci_law = immr->sysconf.pcilaw;
+ pci_pot = immr->ios.pot;
+ pci_ctrl = immr->pci_ctrl;
+ pci_conf = immr->pci_conf;
+ /*
+ * Configure PCI Inbound Translation Windows
+ */
+ pci_ctrl[0].pitar0 = 0x0;
+ pci_ctrl[0].pibar0 = 0x0;
+ pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP |
+ PIWAR_WTT_SNOOP | PIWAR_IWS_4K;
+
+ pci_ctrl[0].pitar1 = 0x0;
+ pci_ctrl[0].pibar1 = 0x0;
+ pci_ctrl[0].piebar1 = 0x0;
+ pci_ctrl[0].piwar1 &= ~PIWAR_EN;
+
+ pci_ctrl[0].pitar2 = 0x0;
+ pci_ctrl[0].pibar2 = 0x0;
+ pci_ctrl[0].piebar2 = 0x0;
+ pci_ctrl[0].piwar2 &= ~PIWAR_EN;
+
+ hose[0].first_busno = 0;
+ hose[0].last_busno = 0xff;
+ pci_setup_indirect(&hose[0],
+ (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));
+ reg16 = 0xff;
+
+ pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0),
+ PCI_COMMAND, ®16);
+ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY;
+ pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
+ PCI_COMMAND, reg16);
+
+ /*
+ * Clear non-reserved bits in status register.
+ */
+ pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
+ PCI_STATUS, 0xffff);
+ pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0),
+ PCI_LATENCY_TIMER, 0x80);
+
+ /*
+ * Unlock configuration lock in PCI function configuration register.
+ */
+ pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0),
+ PCI_FUNCTION_CONFIG, ®16);
+ reg16 &= ~(PCI_FUNCTION_CFG_LOCK);
+ pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
+ PCI_FUNCTION_CONFIG, reg16);
+
+ printf("Enabled PCI 32bit Agent Mode\n");
+}
+#else
+{
+ volatile immap_t *immr;
+ volatile clk83xx_t *clk;
+ volatile law83xx_t *pci_law;
+ volatile pot83xx_t *pci_pot;
+ volatile pcictrl83xx_t *pci_ctrl;
+ volatile pciconf83xx_t *pci_conf;
+
+ u8 val8, orig_i2c_bus;
+ u16 reg16;
+ u32 val32;
+ u32 dev;
+
+ immr = (immap_t *) CFG_IMMR;
+ clk = (clk83xx_t *) & immr->clk;
+ pci_law = immr->sysconf.pcilaw;
+ pci_pot = immr->ios.pot;
+ pci_ctrl = immr->pci_ctrl;
+ pci_conf = immr->pci_conf;
+ /*
+ * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode
+ */
+ val32 = clk->occr;
+ udelay(2000);
+#if defined(PCI_66M)
+ clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
+ printf("PCI clock is 66MHz\n");
+#elif defined(PCI_33M)
+ clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 |
+ OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR;
+ printf("PCI clock is 33MHz\n");
+#else
+ clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
+ printf("PCI clock is 66MHz\n");
+#endif
+ udelay(2000);
+
+ /*
+ * Configure PCI Local Access Windows
+ */
+ pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
+ pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
+
+ pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
+ pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M;
+
+ /*
+ * Configure PCI Outbound Translation Windows
+ */
+
+ /* PCI mem space - prefetch */
+ pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[0].pocmr =
+ POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK);
+
+ /* PCI mmio - non-prefetch mem space */
+ pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK);
+
+ /* PCI IO space */
+ pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);
+
+ /*
+ * Configure PCI Inbound Translation Windows
+ */
+ pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK;
+ pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK;
+ pci_ctrl[0].piebar1 = 0x0;
+ pci_ctrl[0].piwar1 =
+ PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP |
+ PIWAR_IWS_2G;
+
+ /*
+ * Assign PIB PMC slot to desired PCI bus
+ */
+
+ /* Switch temporarily to I2C bus #2 */
+ orig_i2c_bus = i2c_get_bus_num();
+ i2c_set_bus_num(1);
+
+ val8 = 0;
+ i2c_write(0x23, 0x6, 1, &val8, 1);
+ i2c_write(0x23, 0x7, 1, &val8, 1);
+ val8 = 0xff;
+ i2c_write(0x23, 0x2, 1, &val8, 1);
+ i2c_write(0x23, 0x3, 1, &val8, 1);
+
+ val8 = 0;
+ i2c_write(0x26, 0x6, 1, &val8, 1);
+ val8 = 0x34;
+ i2c_write(0x26, 0x7, 1, &val8, 1);
+
+ val8 = 0xf3; /*PMC1, PMC2, PMC3 slot to PCI bus */
+ i2c_write(0x26, 0x2, 1, &val8, 1);
+ val8 = 0xff;
+ i2c_write(0x26, 0x3, 1, &val8, 1);
+
+ val8 = 0;
+ i2c_write(0x27, 0x6, 1, &val8, 1);
+ i2c_write(0x27, 0x7, 1, &val8, 1);
+ val8 = 0xff;
+ i2c_write(0x27, 0x2, 1, &val8, 1);
+ val8 = 0xef;
+ i2c_write(0x27, 0x3, 1, &val8, 1);
+ asm("eieio");
+
+ /* Reset to original I2C bus */
+ i2c_set_bus_num(orig_i2c_bus);
+
+ /*
+ * Release PCI RST Output signal
+ */
+ udelay(2000);
+ pci_ctrl[0].gcr = 1;
+ udelay(2000);
+
+ hose[0].first_busno = 0;
+ hose[0].last_busno = 0xff;
+
+ /* PCI memory prefetch space */
+ pci_set_region(hose[0].regions + 0,
+ CFG_PCI_MEM_BASE,
+ CFG_PCI_MEM_PHYS,
+ CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
+
+ /* PCI memory space */
+ pci_set_region(hose[0].regions + 1,
+ CFG_PCI_MMIO_BASE,
+ CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM);
+
+ /* PCI IO space */
+ pci_set_region(hose[0].regions + 2,
+ CFG_PCI_IO_BASE,
+ CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO);
+
+ /* System memory space */
+ pci_set_region(hose[0].regions + 3,
+ CFG_PCI_SLV_MEM_LOCAL,
+ CFG_PCI_SLV_MEM_BUS,
+ CFG_PCI_SLV_MEM_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ hose[0].region_count = 4;
+
+ pci_setup_indirect(&hose[0],
+ (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));
+
+ pci_register_hose(hose);
+
+ /*
+ * Write command register
+ */
+ reg16 = 0xff;
+ dev = PCI_BDF(0, 0, 0);
+ pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, ®16);
+ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16);
+
+ /*
+ * Clear non-reserved bits in status register.
+ */
+ pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff);
+ pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80);
+ pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08);
+
+ printf("PCI 32bit bus on PMC1 & PMC2 & PMC3\n");
+
+ /*
+ * Hose scan.
+ */
+ hose->last_busno = pci_hose_scan(hose);
+}
+#endif /* CONFIG_PCISLAVE */
+
+#ifdef CONFIG_OF_FLAT_TREE
+void
+ft_pci_setup(void *blob, bd_t *bd)
+{
+ u32 *p;
+ int len;
+
+ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
+ if (p != NULL) {
+ p[0] = hose[0].first_busno;
+ p[1] = hose[0].last_busno;
+ }
+}
+#endif /* CONFIG_OF_FLAT_TREE */
+#endif /* CONFIG_PCI */
diff --git a/board/mpc8360emds/u-boot.lds b/board/mpc8360emds/u-boot.lds
new file mode 100644
index 0000000..937c87a
--- /dev/null
+++ b/board/mpc8360emds/u-boot.lds
@@ -0,0 +1,123 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc83xx/start.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
+ENTRY(_start)
diff --git a/board/prodrive/alpr/Makefile b/board/prodrive/alpr/Makefile
new file mode 100644
index 0000000..00dc180
--- /dev/null
+++ b/board/prodrive/alpr/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o fpga.o nand.o
+SOBJS = init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend *~
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c
new file mode 100644
index 0000000..2389561
--- /dev/null
+++ b/board/prodrive/alpr/alpr.c
@@ -0,0 +1,328 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <asm/processor.h>
+#include <spd_sdram.h>
+#include <ppc4xx_enet.h>
+#include <miiphy.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern int alpr_fpga_init(void);
+
+int board_early_init_f (void)
+{
+ /*-------------------------------------------------------------------------
+ * Initialize EBC CONFIG
+ *-------------------------------------------------------------------------*/
+ mtebc(xbcfg, EBC_CFG_LE_UNLOCK |
+ EBC_CFG_PTD_DISABLE | EBC_CFG_RTC_64PERCLK |
+ EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS |
+ EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT |
+ EBC_CFG_PME_DISABLE | EBC_CFG_PR_32);
+
+ /*--------------------------------------------------------------------
+ * Setup the interrupt controller polarities, triggers, etc.
+ *-------------------------------------------------------------------*/
+ mtdcr (uic0sr, 0xffffffff); /* clear all */
+ mtdcr (uic0er, 0x00000000); /* disable all */
+ mtdcr (uic0cr, 0x00000009); /* SMI & UIC1 crit are critical */
+ mtdcr (uic0pr, 0xfffffe03); /* per manual */
+ mtdcr (uic0tr, 0x01c00000); /* per manual */
+ mtdcr (uic0vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (uic0sr, 0xffffffff); /* clear all */
+
+ mtdcr (uic1sr, 0xffffffff); /* clear all */
+ mtdcr (uic1er, 0x00000000); /* disable all */
+ mtdcr (uic1cr, 0x00000000); /* all non-critical */
+ mtdcr (uic1pr, 0xffffe0ff); /* per ref-board manual */
+ mtdcr (uic1tr, 0x00ffc000); /* per ref-board manual */
+ mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (uic1sr, 0xffffffff); /* clear all */
+
+ mtdcr (uic2sr, 0xffffffff); /* clear all */
+ mtdcr (uic2er, 0x00000000); /* disable all */
+ mtdcr (uic2cr, 0x00000000); /* all non-critical */
+ mtdcr (uic2pr, 0xffffffff); /* per ref-board manual */
+ mtdcr (uic2tr, 0x00ff8c0f); /* per ref-board manual */
+ mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (uic2sr, 0xffffffff); /* clear all */
+
+ mtdcr (uicb0sr, 0xfc000000); /* clear all */
+ mtdcr (uicb0er, 0x00000000); /* disable all */
+ mtdcr (uicb0cr, 0x00000000); /* all non-critical */
+ mtdcr (uicb0pr, 0xfc000000); /* */
+ mtdcr (uicb0tr, 0x00000000); /* */
+ mtdcr (uicb0vr, 0x00000001); /* */
+
+ /* Setup GPIO/IRQ multiplexing */
+ mtsdr(sdr_pfc0, 0x01a03e00);
+
+ return 0;
+}
+
+int last_stage_init(void)
+{
+ unsigned short reg;
+
+ /*
+ * Configure LED's of both Marvell 88E1111 PHY's
+ *
+ * This has to be done after the 4xx ethernet driver is loaded,
+ * so "last_stage_init()" is the right place.
+ */
+ miiphy_read("ppc_4xx_eth2", CONFIG_PHY2_ADDR, 0x18, ®);
+ reg |= 0x0001;
+ miiphy_write("ppc_4xx_eth2", CONFIG_PHY2_ADDR, 0x18, reg);
+ miiphy_read("ppc_4xx_eth3", CONFIG_PHY3_ADDR, 0x18, ®);
+ reg |= 0x0001;
+ miiphy_write("ppc_4xx_eth3", CONFIG_PHY3_ADDR, 0x18, reg);
+
+ return 0;
+}
+
+static int board_rev(void)
+{
+ int rev;
+ u32 pfc0;
+
+ /* Setup GPIO14 & 15 as GPIO */
+ mfsdr(sdr_pfc0, pfc0);
+ pfc0 |= CFG_GPIO_REV0 | CFG_GPIO_REV1;
+ mtsdr(sdr_pfc0, pfc0);
+
+ /* Setup as input */
+ out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV0));
+ out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV0));
+
+ rev = (in32(GPIO0_IR) >> 16) & 0x3;
+
+ /* Setup GPIO14 & 15 as non GPIO again */
+ mfsdr(sdr_pfc0, pfc0);
+ pfc0 &= ~(CFG_GPIO_REV0 | CFG_GPIO_REV1);
+ mtsdr(sdr_pfc0, pfc0);
+
+ return rev;
+}
+
+int checkboard (void)
+{
+ char *s = getenv ("serial#");
+
+ printf ("Board: ALPR");
+ if (s != NULL) {
+ puts (", serial# ");
+ puts (s);
+ }
+ printf(" (Rev. %d)\n", board_rev());
+
+ return (0);
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+ uint *pstart = (uint *) 0x00000000;
+ uint *pend = (uint *) 0x08000000;
+ uint *p;
+
+ for (p = pstart; p < pend; p++)
+ *p = 0xaaaaaaaa;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0xaaaaaaaa) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ for (p = pstart; p < pend; p++)
+ *p = 0x55555555;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0x55555555) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+ return 0;
+}
+#endif
+
+/*************************************************************************
+ * pci_pre_init
+ *
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+int pci_pre_init(struct pci_controller * hose )
+{
+ unsigned long strap;
+
+ /*--------------------------------------------------------------------------+
+ * The ocotea board is always configured as the host & requires the
+ * PCI arbiter to be enabled.
+ *--------------------------------------------------------------------------*/
+ mfsdr(sdr_sdstp1, strap);
+ if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){
+ printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
+ return 0;
+ }
+
+ /* FPGA Init */
+ alpr_fpga_init ();
+
+ return 1;
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+
+/*************************************************************************
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller * hose )
+{
+ /*--------------------------------------------------------------------------+
+ * Disable everything
+ *--------------------------------------------------------------------------*/
+ out32r( PCIX0_PIM0SA, 0 ); /* disable */
+ out32r( PCIX0_PIM1SA, 0 ); /* disable */
+ out32r( PCIX0_PIM2SA, 0 ); /* disable */
+ out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
+
+ /*--------------------------------------------------------------------------+
+ * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
+ * options to not support sizes such as 128/256 MB.
+ *--------------------------------------------------------------------------*/
+ out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+ out32r( PCIX0_PIM0LAH, 0 );
+ out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
+
+ out32r( PCIX0_BAR0, 0 );
+
+ /*--------------------------------------------------------------------------+
+ * Program the board's subsystem id/vendor id
+ *--------------------------------------------------------------------------*/
+ out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
+ out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+
+ out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+/*************************************************************************
+ * is_pci_host
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+
+static void wait_for_pci_ready(void)
+{
+ /*
+ * Configure EREADY as input
+ */
+ out32(GPIO0_TCR, in32(GPIO0_TCR) & ~CFG_GPIO_EREADY);
+ udelay(1000);
+
+ for (;;) {
+ if (in32(GPIO0_IR) & CFG_GPIO_EREADY)
+ return;
+ }
+
+}
+
+int is_pci_host(struct pci_controller *hose)
+{
+ wait_for_pci_ready();
+ return 1; /* return 1 for host controller */
+}
+#endif /* defined(CONFIG_PCI) */
+
+/*************************************************************************
+ * pci_master_init
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+void pci_master_init(struct pci_controller *hose)
+{
+ /*--------------------------------------------------------------------------+
+ | PowerPC440 PCI Master configuration.
+ | Map PLB/processor addresses to PCI memory space.
+ | PLB address 0xA0000000-0xCFFFFFFF ==> PCI address 0x80000000-0xCFFFFFFF
+ | Use byte reversed out routines to handle endianess.
+ | Make this region non-prefetchable.
+ +--------------------------------------------------------------------------*/
+ out32r( PCIX0_POM0SA, 0 ); /* disable */
+ out32r( PCIX0_POM1SA, 0 ); /* disable */
+ out32r( PCIX0_POM2SA, 0 ); /* disable */
+
+ out32r(PCIX0_POM0LAL, CFG_PCI_MEMBASE); /* PMM0 Local Address */
+ out32r(PCIX0_POM0LAH, 0x00000003); /* PMM0 Local Address */
+ out32r(PCIX0_POM0PCIAL, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+ out32r(PCIX0_POM0PCIAH, 0x00000000); /* PMM0 PCI High Address */
+ out32r(PCIX0_POM0SA, ~(0x10000000 - 1) | 1); /* 256MB + enable region */
+
+ out32r(PCIX0_POM1LAL, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
+ out32r(PCIX0_POM1LAH, 0x00000003); /* PMM0 Local Address */
+ out32r(PCIX0_POM1PCIAL, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
+ out32r(PCIX0_POM1PCIAH, 0x00000000); /* PMM0 PCI High Address */
+ out32r(PCIX0_POM1SA, ~(0x10000000 - 1) | 1); /* 256MB + enable region */
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+
+#ifdef CONFIG_POST
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+
+ return (ctrlc());
+}
+#endif
diff --git a/board/prodrive/alpr/config.mk b/board/prodrive/alpr/config.mk
new file mode 100644
index 0000000..9e18335
--- /dev/null
+++ b/board/prodrive/alpr/config.mk
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# AMCC 440GX Reference Platform (Ocotea) board
+#
+
+#TEXT_BASE = 0xFFFE0000
+
+ifeq ($(ramsym),1)
+TEXT_BASE = 0x07FD0000
+else
+TEXT_BASE = 0xFFFC0000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/prodrive/alpr/fpga.c b/board/prodrive/alpr/fpga.c
new file mode 100644
index 0000000..e94360f
--- /dev/null
+++ b/board/prodrive/alpr/fpga.c
@@ -0,0 +1,257 @@
+/*
+ * (C) Copyright 2006
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/*
+ * Altera FPGA configuration support for the ALPR computer from prodrive
+ */
+
+#include <common.h>
+#include <altera.h>
+#include <ACEX1K.h>
+#include <command.h>
+#include <asm-ppc/processor.h>
+#include <ppc440.h>
+#include "fpga.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_FPGA)
+
+#ifdef FPGA_DEBUG
+#define PRINTF(fmt,args...) printf (fmt ,##args)
+#else
+#define PRINTF(fmt,args...)
+#endif
+
+static unsigned long regval;
+
+#define SET_GPIO_REG_0(reg, bit) { \
+ regval = in32(reg); \
+ regval &= ~(0x80000000 >> bit); \
+ out32(reg, regval); \
+ }
+
+#define SET_GPIO_REG_1(reg, bit) { \
+ regval = in32(reg); \
+ regval |= (0x80000000 >> bit); \
+ out32(reg, regval); \
+ }
+
+#define SET_GPIO_0(bit) SET_GPIO_REG_0(GPIO0_OR, bit)
+#define SET_GPIO_1(bit) SET_GPIO_REG_1(GPIO0_OR, bit)
+
+#define FPGA_PRG (0x80000000 >> CFG_GPIO_PROG_EN)
+#define FPGA_CONFIG (0x80000000 >> CFG_GPIO_CONFIG)
+#define FPGA_DATA (0x80000000 >> CFG_GPIO_DATA)
+#define FPGA_CLK (0x80000000 >> CFG_GPIO_CLK)
+#define OLD_VAL (FPGA_PRG | FPGA_CONFIG)
+
+#define SET_FPGA(data) out32(GPIO0_OR, data)
+
+#define FPGA_WRITE_1 { \
+ SET_FPGA(OLD_VAL | 0 | FPGA_DATA); /* set data to 1 */ \
+ SET_FPGA(OLD_VAL | FPGA_CLK | FPGA_DATA);} /* set data to 1 */
+
+#define FPGA_WRITE_0 { \
+ SET_FPGA(OLD_VAL | 0 | 0 ); /* set data to 0 */ \
+ SET_FPGA(OLD_VAL | FPGA_CLK | 0 );} /* set data to 1 */
+
+/* Plattforminitializations */
+/* Here we have to set the FPGA Chain */
+/* PROGRAM_PROG_EN = HIGH */
+/* PROGRAM_SEL_DPR = LOW */
+int fpga_pre_fn (int cookie)
+{
+ unsigned long reg;
+
+ reg = in32(GPIO0_IR);
+ /* Enable the FPGA Chain */
+ SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_PROG_EN);
+ SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_PROG_EN);
+ SET_GPIO_1(CFG_GPIO_PROG_EN);
+ SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_SEL_DPR);
+ SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_SEL_DPR);
+ SET_GPIO_0((CFG_GPIO_SEL_DPR));
+
+ /* initialize the GPIO Pins */
+ /* output */
+ SET_GPIO_0(CFG_GPIO_CLK);
+ SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_CLK);
+ SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CLK);
+
+ /* output */
+ SET_GPIO_0(CFG_GPIO_DATA);
+ SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_DATA);
+ SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_DATA);
+
+ /* First we set STATUS to 0 then as an input */
+ SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_STATUS);
+ SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_STATUS);
+ SET_GPIO_0(CFG_GPIO_STATUS);
+ SET_GPIO_REG_0(GPIO0_TCR, CFG_GPIO_STATUS);
+ SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_STATUS);
+
+ /* output */
+ SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_CONFIG);
+ SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CONFIG);
+ SET_GPIO_0(CFG_GPIO_CONFIG);
+
+ /* input */
+ SET_GPIO_0(CFG_GPIO_CON_DON);
+ SET_GPIO_REG_0(GPIO0_TCR, CFG_GPIO_CON_DON);
+ SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CON_DON);
+
+ /* CONFIG = 0 STATUS = 0 -> FPGA in reset state */
+ SET_GPIO_0(CFG_GPIO_CONFIG);
+ return FPGA_SUCCESS;
+}
+
+/* Set the state of CONFIG Pin */
+int fpga_config_fn (int assert_config, int flush, int cookie)
+{
+ if (assert_config) {
+ SET_GPIO_1(CFG_GPIO_CONFIG);
+ } else {
+ SET_GPIO_0(CFG_GPIO_CONFIG);
+ }
+ return FPGA_SUCCESS;
+}
+
+/* Returns the state of STATUS Pin */
+int fpga_status_fn (int cookie)
+{
+ unsigned long reg;
+
+ reg = in32(GPIO0_IR);
+ if (reg &= (0x80000000 >> CFG_GPIO_STATUS)) {
+ PRINTF("STATUS = HIGH\n");
+ return FPGA_FAIL;
+ }
+ PRINTF("STATUS = LOW\n");
+ return FPGA_SUCCESS;
+}
+
+/* Returns the state of CONF_DONE Pin */
+int fpga_done_fn (int cookie)
+{
+ unsigned long reg;
+ reg = in32(GPIO0_IR);
+ if (reg &= (0x80000000 >> CFG_GPIO_CON_DON)) {
+ PRINTF("CONF_DON = HIGH\n");
+ return FPGA_FAIL;
+ }
+ PRINTF("CONF_DON = LOW\n");
+ return FPGA_SUCCESS;
+}
+
+/* writes the complete buffer to the FPGA
+ writing the complete buffer in one function is much faster,
+ then calling it for every bit */
+int fpga_write_fn (void *buf, size_t len, int flush, int cookie)
+{
+ size_t bytecount = 0;
+ unsigned char *data = (unsigned char *) buf;
+ unsigned char val=0;
+ int i;
+ int len_40 = len / 40;
+
+ while (bytecount < len) {
+ val = data[bytecount++];
+ i = 8;
+ do {
+ if (val & 0x01) {
+ FPGA_WRITE_1;
+ } else {
+ FPGA_WRITE_0;
+ }
+ val >>= 1;
+ i --;
+ } while (i > 0);
+
+#ifdef CFG_FPGA_PROG_FEEDBACK
+ if (bytecount % len_40 == 0) {
+ putc ('.'); /* let them know we are alive */
+#ifdef CFG_FPGA_CHECK_CTRLC
+ if (ctrlc ())
+ return FPGA_FAIL;
+#endif
+ }
+#endif
+ }
+ return FPGA_SUCCESS;
+}
+
+/* called, when programming is aborted */
+int fpga_abort_fn (int cookie)
+{
+ SET_GPIO_1((CFG_GPIO_SEL_DPR));
+ return FPGA_SUCCESS;
+}
+
+/* called, when programming was succesful */
+int fpga_post_fn (int cookie)
+{
+ return fpga_abort_fn (cookie);
+}
+
+/* Note that these are pointers to code that is in Flash. They will be
+ * relocated at runtime.
+ */
+Altera_CYC2_Passive_Serial_fns fpga_fns = {
+ fpga_pre_fn,
+ fpga_config_fn,
+ fpga_status_fn,
+ fpga_done_fn,
+ fpga_write_fn,
+ fpga_abort_fn,
+ fpga_post_fn
+};
+
+Altera_desc fpga[CONFIG_FPGA_COUNT] = {
+ {Altera_CYC2,
+ passive_serial,
+ Altera_EP2C35_SIZE,
+ (void *) &fpga_fns,
+ NULL,
+ 0}
+};
+
+/*
+ * Initialize the fpga. Return 1 on success, 0 on failure.
+ */
+int alpr_fpga_init (void)
+{
+ int i;
+
+ PRINTF ("%s:%d: Initialize FPGA interface (relocation offset = 0x%.8lx)\n", __FUNCTION__, __LINE__, gd->reloc_off);
+ fpga_init (gd->reloc_off);
+
+ for (i = 0; i < CONFIG_FPGA_COUNT; i++) {
+ PRINTF ("%s:%d: Adding fpga %d\n", __FUNCTION__, __LINE__, i);
+ fpga_add (fpga_altera, &fpga[i]);
+ }
+ return 1;
+}
+
+#endif
diff --git a/board/prodrive/alpr/init.S b/board/prodrive/alpr/init.S
new file mode 100644
index 0000000..135674c
--- /dev/null
+++ b/board/prodrive/alpr/init.S
@@ -0,0 +1,103 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+
+/* General */
+#define TLB_VALID 0x00000200
+
+/* Supported page sizes */
+#define SZ_1K 0x00000000
+#define SZ_4K 0x00000010
+#define SZ_16K 0x00000020
+#define SZ_64K 0x00000030
+#define SZ_256K 0x00000040
+#define SZ_1M 0x00000050
+#define SZ_16M 0x00000070
+#define SZ_256M 0x00000090
+
+/* Storage attributes */
+#define SA_W 0x00000800 /* Write-through */
+#define SA_I 0x00000400 /* Caching inhibited */
+#define SA_M 0x00000200 /* Memory coherence */
+#define SA_G 0x00000100 /* Guarded */
+#define SA_E 0x00000080 /* Endian */
+
+/* Access control */
+#define AC_X 0x00000024 /* Execute */
+#define AC_W 0x00000012 /* Write */
+#define AC_R 0x00000009 /* Read */
+
+/* Some handy macros */
+
+#define EPN(e) ((e) & 0xfffffc00)
+#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
+#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
+#define TLB2(a) ( (a)&0x00000fbf )
+
+#define tlbtab_start\
+ mflr r1 ;\
+ bl 0f ;
+
+#define tlbtab_end\
+ .long 0, 0, 0 ; \
+0: mflr r0 ; \
+ mtlr r1 ; \
+ blr ;
+
+#define tlbentry(epn,sz,rpn,erpn,attr)\
+ .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ * Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+
+ .section .bootpg,"ax"
+ .globl tlbtab
+
+tlbtab:
+ tlbtab_start
+ tlbentry( 0xff000000, SZ_16M, 0xff000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X )
+ tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X )
+ tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
+
+ /* PCI */
+ tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 3, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 3, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 3, AC_R|AC_W|SA_G|SA_I )
+
+ /* NAND */
+ tlbentry( CFG_NAND_BASE, SZ_4K, CFG_NAND_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbtab_end
diff --git a/board/prodrive/alpr/nand.c b/board/prodrive/alpr/nand.c
new file mode 100644
index 0000000..e63c921
--- /dev/null
+++ b/board/prodrive/alpr/nand.c
@@ -0,0 +1,173 @@
+/*
+ * (C) Copyright 2006
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de
+ *
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+
+#include <asm/processor.h>
+#include <nand.h>
+
+struct alpr_ndfc_regs {
+ u8 cmd[4];
+ u8 addr_wait;
+ u8 term;
+ u8 dummy;
+ u8 dummy2;
+ u8 data;
+};
+
+static u8 hwctl;
+static struct alpr_ndfc_regs *alpr_ndfc = NULL;
+
+#define readb(addr) (u8)(*(volatile u8 *)(addr))
+#define writeb(d,addr) *(volatile u8 *)(addr) = ((u8)(d))
+
+/*
+ * The ALPR has a NAND Flash Controller (NDFC) that handles all accesses to
+ * the NAND devices. The NDFC has command, address and data registers that
+ * when accessed will set up the NAND flash pins appropriately. We'll use the
+ * hwcontrol function to save the configuration in a global variable.
+ * We can then use this information in the read and write functions to
+ * determine which NDFC register to access.
+ *
+ * There are 2 NAND devices on the board, a Hynix HY27US08561A (1 GByte).
+ */
+static void alpr_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+ switch (cmd) {
+ case NAND_CTL_SETCLE:
+ hwctl |= 0x1;
+ break;
+ case NAND_CTL_CLRCLE:
+ hwctl &= ~0x1;
+ break;
+ case NAND_CTL_SETALE:
+ hwctl |= 0x2;
+ break;
+ case NAND_CTL_CLRALE:
+ hwctl &= ~0x2;
+ break;
+ case NAND_CTL_SETNCE:
+ break;
+ case NAND_CTL_CLRNCE:
+ writeb(0x00, &(alpr_ndfc->term));
+ break;
+ }
+}
+
+static void alpr_nand_write_byte(struct mtd_info *mtd, u_char byte)
+{
+ struct nand_chip *nand = mtd->priv;
+
+ if (hwctl & 0x1)
+ /*
+ * IO_ADDR_W used as CMD[i] reg to support multiple NAND
+ * chips.
+ */
+ writeb(byte, nand->IO_ADDR_W);
+ else if (hwctl & 0x2) {
+ writeb(byte, &(alpr_ndfc->addr_wait));
+ } else
+ writeb(byte, &(alpr_ndfc->data));
+}
+
+static u_char alpr_nand_read_byte(struct mtd_info *mtd)
+{
+ return readb(&(alpr_ndfc->data));
+}
+
+static void alpr_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ struct nand_chip *nand = mtd->priv;
+ int i;
+
+ for (i = 0; i < len; i++) {
+ if (hwctl & 0x1)
+ /*
+ * IO_ADDR_W used as CMD[i] reg to support multiple NAND
+ * chips.
+ */
+ writeb(buf[i], nand->IO_ADDR_W);
+ else if (hwctl & 0x2)
+ writeb(buf[i], &(alpr_ndfc->addr_wait));
+ else
+ writeb(buf[i], &(alpr_ndfc->data));
+ }
+}
+
+static void alpr_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++) {
+ buf[i] = readb(&(alpr_ndfc->data));
+ }
+}
+
+static int alpr_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++)
+ if (buf[i] != readb(&(alpr_ndfc->data)))
+ return i;
+
+ return 0;
+}
+
+static int alpr_nand_dev_ready(struct mtd_info *mtd)
+{
+ volatile u_char val;
+
+ /*
+ * Blocking read to wait for NAND to be ready
+ */
+ val = readb(&(alpr_ndfc->addr_wait));
+
+ /*
+ * Return always true
+ */
+ return 1;
+}
+
+void board_nand_init(struct nand_chip *nand)
+{
+ alpr_ndfc = (struct alpr_ndfc_regs *)CFG_NAND_BASE;
+
+ nand->eccmode = NAND_ECC_SOFT;
+
+ /* Reference hardware control function */
+ nand->hwcontrol = alpr_nand_hwcontrol;
+ /* Set command delay time */
+ nand->write_byte = alpr_nand_write_byte;
+ nand->read_byte = alpr_nand_read_byte;
+ nand->write_buf = alpr_nand_write_buf;
+ nand->read_buf = alpr_nand_read_buf;
+ nand->verify_buf = alpr_nand_verify_buf;
+ nand->dev_ready = alpr_nand_dev_ready;
+}
+#endif
diff --git a/board/prodrive/alpr/u-boot.lds b/board/prodrive/alpr/u-boot.lds
new file mode 100644
index 0000000..4f04089
--- /dev/null
+++ b/board/prodrive/alpr/u-boot.lds
@@ -0,0 +1,157 @@
+/*
+ * (C) Copyright 2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .bootpg 0xFFFFF000 :
+ {
+ cpu/ppc4xx/start.o (.bootpg)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+ board/prodrive/alpr/init.o (.text)
+ cpu/ppc4xx/kgdb.o (.text)
+ cpu/ppc4xx/traps.o (.text)
+ cpu/ppc4xx/interrupts.o (.text)
+ cpu/ppc4xx/serial.o (.text)
+ cpu/ppc4xx/cpu_init.o (.text)
+ cpu/ppc4xx/speed.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+
+/* . = env_offset;*/
+/* common/environment.o(.text)*/
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/prodrive/common/flash.c b/board/prodrive/common/flash.c
index 8630cc1..363631f 100644
--- a/board/prodrive/common/flash.c
+++ b/board/prodrive/common/flash.c
@@ -48,6 +48,7 @@
case FLASH_MAN_AMD: printf ("AMD "); break;
case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
case FLASH_MAN_SST: printf ("SST "); break;
+ case FLASH_MAN_STM: printf ("ST "); break;
case FLASH_MAN_EXCEL: printf ("Excel Semiconductor "); break;
default: printf ("Unknown Vendor "); break;
}
@@ -156,6 +157,9 @@
case (CFG_FLASH_WORD_SIZE)SST_MANUFACT:
info->flash_id = FLASH_MAN_SST;
break;
+ case (CFG_FLASH_WORD_SIZE)STM_MANUFACT:
+ info->flash_id = FLASH_MAN_STM;
+ break;
case (CFG_FLASH_WORD_SIZE)EXCEL_MANUFACT:
info->flash_id = FLASH_MAN_EXCEL;
break;
diff --git a/board/prodrive/p3mx/64460.h b/board/prodrive/p3mx/64460.h
new file mode 100644
index 0000000..8bb0ebf
--- /dev/null
+++ b/board/prodrive/p3mx/64460.h
@@ -0,0 +1,52 @@
+/*
+ * (C) Copyright 2003
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * main board support/init for the Galileo Eval board DB64460.
+ */
+
+#ifndef __64460_H__
+#define __64460_H__
+
+/* CPU Configuration bits */
+#define CPU_CONF_ADDR_MISS_EN (1 << 8)
+#define CPU_CONF_SINGLE_CPU (1 << 11)
+#define CPU_CONF_ENDIANESS (1 << 12)
+#define CPU_CONF_PIPELINE (1 << 13)
+#define CPU_CONF_STOP_RETRY (1 << 17)
+#define CPU_CONF_MULTI_DECODE (1 << 18)
+#define CPU_CONF_DP_VALID (1 << 19)
+#define CPU_CONF_PERR_PROP (1 << 22)
+#define CPU_CONF_AACK_DELAY_2 (1 << 25)
+#define CPU_CONF_AP_VALID (1 << 26)
+#define CPU_CONF_REMAP_WR_DIS (1 << 27)
+
+/* CPU Master Control bits */
+#define CPU_MAST_CTL_ARB_EN (1 << 8)
+#define CPU_MAST_CTL_MASK_BR_1 (1 << 9)
+#define CPU_MAST_CTL_M_WR_TRIG (1 << 10)
+#define CPU_MAST_CTL_M_RD_TRIG (1 << 11)
+#define CPU_MAST_CTL_CLEAN_BLK (1 << 12)
+#define CPU_MAST_CTL_FLUSH_BLK (1 << 13)
+
+#endif /* __64460_H__ */
diff --git a/board/prodrive/p3mx/Makefile b/board/prodrive/p3mx/Makefile
new file mode 100644
index 0000000..bf74a5a
--- /dev/null
+++ b/board/prodrive/p3mx/Makefile
@@ -0,0 +1,55 @@
+#
+# (C) Copyright 2002-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../../Marvell/common)
+endif
+
+LIB = $(obj)lib$(BOARD).a
+
+SOBJS = misc.o
+COBJS = $(BOARD).o mpsc.o mv_eth.o pci.o sdram_init.o serial.o \
+ ../../Marvell/common/i2c.o ../../Marvell/common/memory.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend *~
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/prodrive/p3mx/config.mk b/board/prodrive/p3mx/config.mk
new file mode 100644
index 0000000..35bf1c1
--- /dev/null
+++ b/board/prodrive/p3mx/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2002-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# p3mx boards (P3M750 & P3M7448)
+#
+
+TEXT_BASE = 0xfff00000
diff --git a/board/prodrive/p3mx/eth.h b/board/prodrive/p3mx/eth.h
new file mode 100644
index 0000000..aab32d2
--- /dev/null
+++ b/board/prodrive/p3mx/eth.h
@@ -0,0 +1,43 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * eth.h - header file for the polled mode GT ethernet driver
+ */
+
+#ifndef __EVB64360_ETH_H__
+#define __EVB64360_ETH_H__
+
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <common.h>
+
+
+int db64360_eth0_poll(void);
+int db64360_eth0_transmit(unsigned int s, volatile char *p);
+void db64360_eth0_disable(void);
+bool network_start(bd_t *bis);
+
+
+#endif /* __EVB64360_ETH_H__ */
diff --git a/board/prodrive/p3mx/misc.S b/board/prodrive/p3mx/misc.S
new file mode 100644
index 0000000..160b1d3
--- /dev/null
+++ b/board/prodrive/p3mx/misc.S
@@ -0,0 +1,245 @@
+#include <config.h>
+#include <74xx_7xx.h>
+#include "version.h"
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#include "../../Marvell/include/mv_gen_reg.h"
+
+#ifdef CONFIG_ECC
+ /* Galileo specific asm code for initializing ECC */
+ .globl board_relocate_rom
+board_relocate_rom:
+ mflr r7
+ /* update the location of the GT registers */
+ lis r11, CFG_GT_REGS@h
+ /* if we're using ECC, we must use the DMA engine to copy ourselves */
+ bl start_idma_transfer_0
+ bl wait_for_idma_0
+ bl stop_idma_engine_0
+
+ mtlr r7
+ blr
+
+ .globl board_init_ecc
+board_init_ecc:
+ mflr r7
+ /* NOTE: r10 still contains the location we've been relocated to
+ * which happens to be TOP_OF_RAM - CFG_MONITOR_LEN */
+
+ /* now that we're running from ram, init the rest of main memory
+ * for ECC use */
+ lis r8, CFG_MONITOR_LEN@h
+ ori r8, r8, CFG_MONITOR_LEN@l
+
+ divw r3, r10, r8
+
+ /* set up the counter, and init the starting address */
+ mtctr r3
+ li r12, 0
+
+ /* bytes per transfer */
+ mr r5, r8
+about_to_init_ecc:
+1: mr r3, r12
+ mr r4, r12
+ bl start_idma_transfer_0
+ bl wait_for_idma_0
+ bl stop_idma_engine_0
+ add r12, r12, r8
+ bdnz 1b
+
+ mtlr r7
+ blr
+
+ /* r3: dest addr
+ * r4: source addr
+ * r5: byte count
+ * r11: gt regbase
+ * trashes: r6, r5
+ */
+start_idma_transfer_0:
+ /* set the byte count, including the OWN bit */
+ mr r6, r11
+ ori r6, r6, CHANNEL0_DMA_BYTE_COUNT
+ stwbrx r5, 0, (r6)
+
+ /* set the source address */
+ mr r6, r11
+ ori r6, r6, CHANNEL0_DMA_SOURCE_ADDRESS
+ stwbrx r4, 0, (r6)
+
+ /* set the dest address */
+ mr r6, r11
+ ori r6, r6, CHANNEL0_DMA_DESTINATION_ADDRESS
+ stwbrx r3, 0, (r6)
+
+ /* set the next record pointer */
+ li r5, 0
+ mr r6, r11
+ ori r6, r6, CHANNEL0NEXT_RECORD_POINTER
+ stwbrx r5, 0, (r6)
+
+ /* set the low control register */
+ /* bit 9 is NON chained mode, bit 31 is new style descriptors.
+ bit 12 is channel enable */
+ ori r5, r5, (1 << 12) | (1 << 12) | (1 << 11)
+ /* 15 shifted by 16 (oris) == bit 31 */
+ oris r5, r5, (1 << 15)
+ mr r6, r11
+ ori r6, r6, CHANNEL0CONTROL
+ stwbrx r5, 0, (r6)
+
+ blr
+
+ /* this waits for the bytecount to return to zero, indicating
+ * that the trasfer is complete */
+wait_for_idma_0:
+ mr r5, r11
+ lis r6, 0xff
+ ori r6, r6, 0xffff
+ ori r5, r5, CHANNEL0_DMA_BYTE_COUNT
+1: lwbrx r4, 0, (r5)
+ and. r4, r4, r6
+ bne 1b
+
+ blr
+
+ /* this turns off channel 0 of the idma engine */
+stop_idma_engine_0:
+ /* shut off the DMA engine */
+ li r5, 0
+ mr r6, r11
+ ori r6, r6, CHANNEL0CONTROL
+ stwbrx r5, 0, (r6)
+
+ blr
+#endif
+
+#ifdef CFG_BOARD_ASM_INIT
+ /* NOTE: trashes r3-r7 */
+ .globl board_asm_init
+board_asm_init:
+ /* just move the GT registers to where they belong */
+ lis r3, CFG_DFL_GT_REGS@h
+ ori r3, r3, CFG_DFL_GT_REGS@l
+ lis r4, CFG_GT_REGS@h
+ ori r4, r4, CFG_GT_REGS@l
+ li r5, INTERNAL_SPACE_DECODE
+
+ /* test to see if we've already moved */
+ lwbrx r6, r5, r4
+ andi. r6, r6, 0xffff
+ /* check loading of R7 is: 0x0F80 should: 0xf800: DONE */
+/* rlwinm r7, r4, 8, 16, 31
+ rlwinm r7, r4, 12, 16, 31 */ /* original */
+ rlwinm r7, r4, 16, 16, 31
+ /* -----------------------------------------------------*/
+ cmp cr0, r7, r6
+ beqlr
+
+ /* nope, have to move the registers */
+ lwbrx r6, r5, r3
+ andis. r6, r6, 0xffff
+ or r6, r6, r7
+ stwbrx r6, r5, r3
+
+ /* now, poll for the change */
+1: lwbrx r7, r5, r4
+ cmp cr0, r7, r6
+ bne 1b
+
+ lis r3, CFG_INT_SRAM_BASE@h
+ ori r3, r3, CFG_INT_SRAM_BASE@l
+ rlwinm r3, r3, 16, 16, 31
+ lis r4, CFG_GT_REGS@h
+ ori r4, r4, CFG_GT_REGS@l
+ li r5, INTEGRATED_SRAM_BASE_ADDR
+ stwbrx r3, r5, r4
+
+2: lwbrx r6, r5, r4
+ cmp cr0, r3, r6
+ bne 2b
+
+ /* done! */
+ blr
+#endif
+
+/* For use of the debug LEDs */
+ .global led_on0_relocated
+led_on0_relocated:
+ xor r21, r21, r21
+ xor r18, r18, r18
+ lis r18, 0xFC80
+ ori r18, r18, 0x8000
+/* stw r21, 0x0(r18) */
+ sync
+ blr
+
+ .global led_off0_relocated
+led_off0_relocated:
+ xor r21, r21, r21
+ xor r18, r18, r18
+ lis r18, 0xFC81
+ ori r18, r18, 0x4000
+/* stw r21, 0x0(r18) */
+ sync
+ blr
+
+ .global led_on0
+led_on0:
+ xor r18, r18, r18
+ lis r18, 0x1c80
+ ori r18, r18, 0x8000
+/* stw r18, 0x0(r18) */
+ sync
+ blr
+
+ .global led_off0
+led_off0:
+ xor r18, r18, r18
+ lis r18, 0x1c81
+ ori r18, r18, 0x4000
+/* stw r18, 0x0(r18) */
+ sync
+ blr
+
+ .global led_on1
+led_on1:
+ xor r18, r18, r18
+ lis r18, 0x1c80
+ ori r18, r18, 0xc000
+/* stw r18, 0x0(r18) */
+ sync
+ blr
+
+ .global led_off1
+led_off1:
+ xor r18, r18, r18
+ lis r18, 0x1c81
+ ori r18, r18, 0x8000
+/* stw r18, 0x0(r18) */
+ sync
+ blr
+
+ .global led_on2
+led_on2:
+ xor r18, r18, r18
+ lis r18, 0x1c81
+ ori r18, r18, 0x0000
+/* stw r18, 0x0(r18) */
+ sync
+ blr
+
+ .global led_off2
+led_off2:
+ xor r18, r18, r18
+ lis r18, 0x1c81
+ ori r18, r18, 0xc000
+/* stw r18, 0x0(r18) */
+ sync
+ blr
diff --git a/board/prodrive/p3mx/mpsc.c b/board/prodrive/p3mx/mpsc.c
new file mode 100644
index 0000000..da95cfa
--- /dev/null
+++ b/board/prodrive/p3mx/mpsc.c
@@ -0,0 +1,1013 @@
+/*
+ * (C) Copyright 2001
+ * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*************************************************************************
+ * changes for Marvell DB64460 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ ************************************************************************/
+
+/*
+ * mpsc.c - driver for console over the MPSC.
+ */
+
+
+#include <common.h>
+#include <config.h>
+#include <asm/cache.h>
+
+#include <malloc.h>
+#include "mpsc.h"
+
+#include "mv_regs.h"
+
+#include "../../Marvell/include/memory.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Define this if you wish to use the MPSC as a register based UART.
+ * This will force the serial port to not use the SDMA engine at all.
+ */
+#undef CONFIG_MPSC_DEBUG_PORT
+
+
+int (*mpsc_putchar) (char ch) = mpsc_putchar_early;
+char (*mpsc_getchar) (void) = mpsc_getchar_debug;
+int (*mpsc_test_char) (void) = mpsc_test_char_debug;
+
+
+static volatile unsigned int *rx_desc_base = NULL;
+static unsigned int rx_desc_index = 0;
+static volatile unsigned int *tx_desc_base = NULL;
+static unsigned int tx_desc_index = 0;
+
+/* local function declarations */
+static int galmpsc_connect (int channel, int connect);
+static int galmpsc_route_rx_clock (int channel, int brg);
+static int galmpsc_route_tx_clock (int channel, int brg);
+static int galmpsc_write_config_regs (int mpsc, int mode);
+static int galmpsc_config_channel_regs (int mpsc);
+static int galmpsc_set_char_length (int mpsc, int value);
+static int galmpsc_set_stop_bit_length (int mpsc, int value);
+static int galmpsc_set_parity (int mpsc, int value);
+static int galmpsc_enter_hunt (int mpsc);
+static int galmpsc_set_brkcnt (int mpsc, int value);
+static int galmpsc_set_tcschar (int mpsc, int value);
+static int galmpsc_set_snoop (int mpsc, int value);
+static int galmpsc_shutdown (int mpsc);
+
+static int galsdma_set_RFT (int channel);
+static int galsdma_set_SFM (int channel);
+static int galsdma_set_rxle (int channel);
+static int galsdma_set_txle (int channel);
+static int galsdma_set_burstsize (int channel, unsigned int value);
+static int galsdma_set_RC (int channel, unsigned int value);
+
+static int galbrg_set_CDV (int channel, int value);
+static int galbrg_enable (int channel);
+static int galbrg_disable (int channel);
+static int galbrg_set_clksrc (int channel, int value);
+static int galbrg_set_CUV (int channel, int value);
+
+static void galsdma_enable_rx (void);
+static int galsdma_set_mem_space (unsigned int memSpace,
+ unsigned int memSpaceTarget,
+ unsigned int memSpaceAttr,
+ unsigned int baseAddress,
+ unsigned int size);
+
+
+#define SOFTWARE_CACHE_MANAGEMENT
+
+#ifdef SOFTWARE_CACHE_MANAGEMENT
+#define FLUSH_DCACHE(a,b) if(dcache_status()){clean_dcache_range((u32)(a),(u32)(b));}
+#define FLUSH_AND_INVALIDATE_DCACHE(a,b) if(dcache_status()){flush_dcache_range((u32)(a),(u32)(b));}
+#define INVALIDATE_DCACHE(a,b) if(dcache_status()){invalidate_dcache_range((u32)(a),(u32)(b));}
+#else
+#define FLUSH_DCACHE(a,b)
+#define FLUSH_AND_INVALIDATE_DCACHE(a,b)
+#define INVALIDATE_DCACHE(a,b)
+#endif
+
+#ifdef CONFIG_MPSC_DEBUG_PORT
+static void mpsc_debug_init (void)
+{
+
+ volatile unsigned int temp;
+
+ /* Clear the CFR (CHR4) */
+ /* Write random 'Z' bit (bit 29) of CHR4 to enable debug uart *UNDOCUMENTED FEATURE* */
+ temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP));
+ temp &= 0xffffff00;
+ temp |= BIT29;
+ GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP),
+ temp);
+
+ /* Set the Valid bit 'V' (bit 12) and int generation bit 'INT' (bit 15) */
+ temp = GTREGREAD (GALMPSC_CHANNELREG_5 + (CHANNEL * GALMPSC_REG_GAP));
+ temp |= (BIT12 | BIT15);
+ GT_REG_WRITE (GALMPSC_CHANNELREG_5 + (CHANNEL * GALMPSC_REG_GAP),
+ temp);
+
+ /* Set int mask */
+ temp = GTREGREAD (GALMPSC_0_INT_MASK);
+ temp |= BIT6;
+ GT_REG_WRITE (GALMPSC_0_INT_MASK, temp);
+}
+#endif
+
+char mpsc_getchar_debug (void)
+{
+ volatile int temp;
+ volatile unsigned int cause;
+
+ cause = GTREGREAD (GALMPSC_0_INT_CAUSE);
+ while ((cause & BIT6) == 0) {
+ cause = GTREGREAD (GALMPSC_0_INT_CAUSE);
+ }
+
+ temp = GTREGREAD (GALMPSC_CHANNELREG_10 +
+ (CHANNEL * GALMPSC_REG_GAP));
+ /* By writing 1's to the set bits, the register is cleared */
+ GT_REG_WRITE (GALMPSC_CHANNELREG_10 + (CHANNEL * GALMPSC_REG_GAP),
+ temp);
+ GT_REG_WRITE (GALMPSC_0_INT_CAUSE, cause & ~BIT6);
+ return (temp >> 16) & 0xff;
+}
+
+/* special function for running out of flash. doesn't modify any
+ * global variables [josh] */
+int mpsc_putchar_early (char ch)
+{
+ int mpsc = CHANNEL;
+ int temp =
+ GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
+ galmpsc_set_tcschar (mpsc, ch);
+ GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP),
+ temp | 0x200);
+
+#define MAGIC_FACTOR (10*1000000)
+
+ udelay (MAGIC_FACTOR / gd->baudrate);
+ return 0;
+}
+
+/* This is used after relocation, see serial.c and mpsc_init2 */
+static int mpsc_putchar_sdma (char ch)
+{
+ volatile unsigned int *p;
+ unsigned int temp;
+
+
+ /* align the descriptor */
+ p = tx_desc_base;
+ memset ((void *) p, 0, 8 * sizeof (unsigned int));
+
+ /* fill one 64 bit buffer */
+ /* word swap, pad with 0 */
+ p[4] = 0; /* x */
+ p[5] = (unsigned int) ch; /* x */
+
+ /* CHANGED completely according to GT64260A dox - NTL */
+ p[0] = 0x00010001; /* 0 */
+ p[1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST; /* 4 */
+ p[2] = 0; /* 8 */
+ p[3] = (unsigned int) &p[4]; /* c */
+
+#if 0
+ p[9] = DESC_FIRST | DESC_LAST;
+ p[10] = (unsigned int) &p[0];
+ p[11] = (unsigned int) &p[12];
+#endif
+
+ FLUSH_DCACHE (&p[0], &p[8]);
+
+ GT_REG_WRITE (GALSDMA_0_CUR_TX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
+ (unsigned int) &p[0]);
+ GT_REG_WRITE (GALSDMA_0_FIR_TX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
+ (unsigned int) &p[0]);
+
+ temp = GTREGREAD (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF));
+ temp |= (TX_DEMAND | TX_STOP);
+ GT_REG_WRITE (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF), temp);
+
+ INVALIDATE_DCACHE (&p[1], &p[2]);
+
+ while (p[1] & DESC_OWNER_BIT) {
+ udelay (100);
+ INVALIDATE_DCACHE (&p[1], &p[2]);
+ }
+ return 0;
+}
+
+char mpsc_getchar_sdma (void)
+{
+ static unsigned int done = 0;
+ volatile char ch;
+ unsigned int len = 0, idx = 0, temp;
+
+ volatile unsigned int *p;
+
+
+ do {
+ p = &rx_desc_base[rx_desc_index * 8];
+
+ INVALIDATE_DCACHE (&p[0], &p[1]);
+ /* Wait for character */
+ while (p[1] & DESC_OWNER_BIT) {
+ udelay (100);
+ INVALIDATE_DCACHE (&p[0], &p[1]);
+ }
+
+ /* Handle error case */
+ if (p[1] & (1 << 15)) {
+ printf ("oops, error: %08x\n", p[1]);
+
+ temp = GTREGREAD (GALMPSC_CHANNELREG_2 +
+ (CHANNEL * GALMPSC_REG_GAP));
+ temp |= (1 << 23);
+ GT_REG_WRITE (GALMPSC_CHANNELREG_2 +
+ (CHANNEL * GALMPSC_REG_GAP), temp);
+
+ /* Can't poll on abort bit, so we just wait. */
+ udelay (100);
+
+ galsdma_enable_rx ();
+ }
+
+ /* Number of bytes left in this descriptor */
+ len = p[0] & 0xffff;
+
+ if (len) {
+ /* Where to look */
+ idx = 5;
+ if (done > 3)
+ idx = 4;
+ if (done > 7)
+ idx = 7;
+ if (done > 11)
+ idx = 6;
+
+ INVALIDATE_DCACHE (&p[idx], &p[idx + 1]);
+ ch = p[idx] & 0xff;
+ done++;
+ }
+
+ if (done < len) {
+ /* this descriptor has more bytes still
+ * shift down the char we just read, and leave the
+ * buffer in place for the next time around
+ */
+ p[idx] = p[idx] >> 8;
+ FLUSH_DCACHE (&p[idx], &p[idx + 1]);
+ }
+
+ if (done == len) {
+ /* nothing left in this descriptor.
+ * go to next one
+ */
+ p[1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;
+ p[0] = 0x00100000;
+ FLUSH_DCACHE (&p[0], &p[1]);
+ /* Next descriptor */
+ rx_desc_index = (rx_desc_index + 1) % RX_DESC;
+ done = 0;
+ }
+ } while (len == 0); /* galileo bug.. len might be zero */
+
+ return ch;
+}
+
+
+int mpsc_test_char_debug (void)
+{
+ if ((GTREGREAD (GALMPSC_0_INT_CAUSE) & BIT6) == 0)
+ return 0;
+ else {
+ return 1;
+ }
+}
+
+
+int mpsc_test_char_sdma (void)
+{
+ volatile unsigned int *p = &rx_desc_base[rx_desc_index * 8];
+
+ INVALIDATE_DCACHE (&p[1], &p[2]);
+
+ if (p[1] & DESC_OWNER_BIT)
+ return 0;
+ else
+ return 1;
+}
+
+int mpsc_init (int baud)
+{
+ /* BRG CONFIG */
+ galbrg_set_baudrate (CHANNEL, baud);
+ galbrg_set_clksrc (CHANNEL, 8); /* set source=Tclk */
+ galbrg_set_CUV (CHANNEL, 0); /* set up CountUpValue */
+ galbrg_enable (CHANNEL); /* Enable BRG */
+
+ /* Set up clock routing */
+ galmpsc_connect (CHANNEL, GALMPSC_CONNECT); /* connect it */
+
+ galmpsc_route_rx_clock (CHANNEL, CHANNEL); /* chosse BRG0 for Rx */
+ galmpsc_route_tx_clock (CHANNEL, CHANNEL); /* chose BRG0 for Tx */
+
+ /* reset MPSC state */
+ galmpsc_shutdown (CHANNEL);
+
+ /* SDMA CONFIG */
+ galsdma_set_burstsize (CHANNEL, L1_CACHE_BYTES / 8); /* in 64 bit words (8 bytes) */
+ galsdma_set_txle (CHANNEL);
+ galsdma_set_rxle (CHANNEL);
+ galsdma_set_RC (CHANNEL, 0xf);
+ galsdma_set_SFM (CHANNEL);
+ galsdma_set_RFT (CHANNEL);
+
+ /* MPSC CONFIG */
+ galmpsc_write_config_regs (CHANNEL, GALMPSC_UART);
+ galmpsc_config_channel_regs (CHANNEL);
+ galmpsc_set_char_length (CHANNEL, GALMPSC_CHAR_LENGTH_8); /* 8 */
+ galmpsc_set_parity (CHANNEL, GALMPSC_PARITY_NONE); /* N */
+ galmpsc_set_stop_bit_length (CHANNEL, GALMPSC_STOP_BITS_1); /* 1 */
+
+#ifdef CONFIG_MPSC_DEBUG_PORT
+ mpsc_debug_init ();
+#endif
+
+ /* COMM_MPSC CONFIG */
+#ifdef SOFTWARE_CACHE_MANAGEMENT
+ galmpsc_set_snoop (CHANNEL, 0); /* disable snoop */
+#else
+ galmpsc_set_snoop (CHANNEL, 1); /* enable snoop */
+#endif
+
+ return 0;
+}
+
+
+void mpsc_sdma_init (void)
+{
+ /* Setup SDMA channel0 SDMA_CONFIG_REG*/
+ GT_REG_WRITE (SDMA_CONFIG_REG (0), 0x000020ff);
+
+ /* Enable MPSC-Window0 for DRAM Bank 0 */
+ if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT,
+ MV64460_SDMA_DRAM_CS_0_TARGET,
+ 0,
+ memoryGetBankBaseAddress(0),
+ memoryGetBankSize(0)) != true)
+ printf ("%s: SDMA_Window0 memory setup failed !!! \n",
+ __FUNCTION__);
+
+
+ /* Enable MPSC-Window1 for DRAM Bank 1 */
+ if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_1_BIT,
+ MV64460_SDMA_DRAM_CS_1_TARGET,
+ 0,
+ memoryGetBankBaseAddress(1),
+ memoryGetBankSize(1)) != true)
+ printf ("%s: SDMA_Window1 memory setup failed !!! \n",
+ __FUNCTION__);
+
+
+ /* Disable MPSC-Window2 */
+ if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_2_BIT,
+ MV64460_SDMA_DRAM_CS_2_TARGET,
+ 0,
+ memoryGetBankBaseAddress(2),
+ memoryGetBankSize(2)) != true)
+ printf ("%s: SDMA_Window2 memory setup failed !!! \n",
+ __FUNCTION__);
+
+
+ /* Disable MPSC-Window3 */
+ if (galsdma_set_mem_space (MV64460_CUNIT_BASE_ADDR_WIN_3_BIT,
+ MV64460_SDMA_DRAM_CS_3_TARGET,
+ 0,
+ memoryGetBankBaseAddress(3),
+ memoryGetBankSize(3)) != true)
+ printf ("%s: SDMA_Window3 memory setup failed !!! \n",
+ __FUNCTION__);
+
+ /* Setup MPSC0 access mode Window0 full access */
+ GT_SET_REG_BITS (MPSC0_ACCESS_PROTECTION_REG,
+ (MV64460_SDMA_WIN_ACCESS_FULL <<
+ (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
+
+ /* Setup MPSC1 access mode Window1 full access */
+ GT_SET_REG_BITS (MPSC1_ACCESS_PROTECTION_REG,
+ (MV64460_SDMA_WIN_ACCESS_FULL <<
+ (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
+
+ /* Setup MPSC internal address space base address */
+ GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS);
+
+ /* no high address remap*/
+ GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG0, 0x00);
+ GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG1, 0x00);
+
+ /* clear interrupt cause register for MPSC (fault register)*/
+ GT_REG_WRITE (CUNIT_INTERRUPT_CAUSE_REG, 0x00);
+}
+
+
+void mpsc_init2 (void)
+{
+ int i;
+
+#ifndef CONFIG_MPSC_DEBUG_PORT
+ mpsc_putchar = mpsc_putchar_sdma;
+ mpsc_getchar = mpsc_getchar_sdma;
+ mpsc_test_char = mpsc_test_char_sdma;
+#endif
+ /* RX descriptors */
+ rx_desc_base = (unsigned int *) malloc (((RX_DESC + 1) * 8) *
+ sizeof (unsigned int));
+
+ /* align descriptors */
+ rx_desc_base = (unsigned int *)
+ (((unsigned int) rx_desc_base + 32) & 0xFFFFFFF0);
+
+ rx_desc_index = 0;
+
+ memset ((void *) rx_desc_base, 0,
+ (RX_DESC * 8) * sizeof (unsigned int));
+
+ for (i = 0; i < RX_DESC; i++) {
+ rx_desc_base[i * 8 + 3] = (unsigned int) &rx_desc_base[i * 8 + 4]; /* Buffer */
+ rx_desc_base[i * 8 + 2] = (unsigned int) &rx_desc_base[(i + 1) * 8]; /* Next descriptor */
+ rx_desc_base[i * 8 + 1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST; /* Command & control */
+ rx_desc_base[i * 8] = 0x00100000;
+ }
+ rx_desc_base[(i - 1) * 8 + 2] = (unsigned int) &rx_desc_base[0];
+
+ FLUSH_DCACHE (&rx_desc_base[0], &rx_desc_base[RX_DESC * 8]);
+ GT_REG_WRITE (GALSDMA_0_CUR_RX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
+ (unsigned int) &rx_desc_base[0]);
+
+ /* TX descriptors */
+ tx_desc_base = (unsigned int *) malloc (((TX_DESC + 1) * 8) *
+ sizeof (unsigned int));
+
+ /* align descriptors */
+ tx_desc_base = (unsigned int *)
+ (((unsigned int) tx_desc_base + 32) & 0xFFFFFFF0);
+
+ tx_desc_index = -1;
+
+ memset ((void *) tx_desc_base, 0,
+ (TX_DESC * 8) * sizeof (unsigned int));
+
+ for (i = 0; i < TX_DESC; i++) {
+ tx_desc_base[i * 8 + 5] = (unsigned int) 0x23232323;
+ tx_desc_base[i * 8 + 4] = (unsigned int) 0x23232323;
+ tx_desc_base[i * 8 + 3] =
+ (unsigned int) &tx_desc_base[i * 8 + 4];
+ tx_desc_base[i * 8 + 2] =
+ (unsigned int) &tx_desc_base[(i + 1) * 8];
+ tx_desc_base[i * 8 + 1] =
+ DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;
+
+ /* set sbytecnt and shadow byte cnt to 1 */
+ tx_desc_base[i * 8] = 0x00010001;
+ }
+ tx_desc_base[(i - 1) * 8 + 2] = (unsigned int) &tx_desc_base[0];
+
+ FLUSH_DCACHE (&tx_desc_base[0], &tx_desc_base[TX_DESC * 8]);
+
+ udelay (100);
+
+ galsdma_enable_rx ();
+
+ return;
+}
+
+int galbrg_set_baudrate (int channel, int rate)
+{
+ int clock;
+
+ galbrg_disable (channel); /*ok */
+
+#ifdef ZUMA_NTL
+ /* from tclk */
+ clock = (CFG_TCLK / (16 * rate)) - 1;
+#else
+ clock = (CFG_TCLK / (16 * rate)) - 1;
+#endif
+
+ galbrg_set_CDV (channel, clock); /* set timer Reg. for BRG */
+
+ galbrg_enable (channel);
+
+ gd->baudrate = rate;
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------ */
+
+/* Below are all the private functions that no one else needs */
+
+static int galbrg_set_CDV (int channel, int value)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
+ temp &= 0xFFFF0000;
+ temp |= (value & 0x0000FFFF);
+ GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
+
+ return 0;
+}
+
+static int galbrg_enable (int channel)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
+ temp |= 0x00010000;
+ GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
+
+ return 0;
+}
+
+static int galbrg_disable (int channel)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
+ temp &= 0xFFFEFFFF;
+ GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
+
+ return 0;
+}
+
+static int galbrg_set_clksrc (int channel, int value)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
+ temp &= 0xFFC3FFFF; /* Bit 18 - 21 (MV 64260 18-22) */
+ temp |= (value << 18);
+ GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
+ return 0;
+}
+
+static int galbrg_set_CUV (int channel, int value)
+{
+ /* set CountUpValue */
+ GT_REG_WRITE (GALBRG_0_BTREG + (channel * GALBRG_REG_GAP), value);
+
+ return 0;
+}
+
+#if 0
+static int galbrg_reset (int channel)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
+ temp |= 0x20000;
+ GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
+
+ return 0;
+}
+#endif
+
+static int galsdma_set_RFT (int channel)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
+ temp |= 0x00000001;
+ GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
+ temp);
+
+ return 0;
+}
+
+static int galsdma_set_SFM (int channel)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
+ temp |= 0x00000002;
+ GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
+ temp);
+
+ return 0;
+}
+
+static int galsdma_set_rxle (int channel)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
+ temp |= 0x00000040;
+ GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
+ temp);
+
+ return 0;
+}
+
+static int galsdma_set_txle (int channel)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
+ temp |= 0x00000080;
+ GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
+ temp);
+
+ return 0;
+}
+
+static int galsdma_set_RC (int channel, unsigned int value)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
+ temp &= ~0x0000003c;
+ temp |= (value << 2);
+ GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
+ temp);
+
+ return 0;
+}
+
+static int galsdma_set_burstsize (int channel, unsigned int value)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
+ temp &= 0xFFFFCFFF;
+ switch (value) {
+ case 8:
+ GT_REG_WRITE (GALSDMA_0_CONF_REG +
+ (channel * GALSDMA_REG_DIFF),
+ (temp | (0x3 << 12)));
+ break;
+
+ case 4:
+ GT_REG_WRITE (GALSDMA_0_CONF_REG +
+ (channel * GALSDMA_REG_DIFF),
+ (temp | (0x2 << 12)));
+ break;
+
+ case 2:
+ GT_REG_WRITE (GALSDMA_0_CONF_REG +
+ (channel * GALSDMA_REG_DIFF),
+ (temp | (0x1 << 12)));
+ break;
+
+ case 1:
+ GT_REG_WRITE (GALSDMA_0_CONF_REG +
+ (channel * GALSDMA_REG_DIFF),
+ (temp | (0x0 << 12)));
+ break;
+
+ default:
+ return -1;
+ break;
+ }
+
+ return 0;
+}
+
+static int galmpsc_connect (int channel, int connect)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALMPSC_ROUTING_REGISTER);
+
+ if ((channel == 0) && connect)
+ temp &= ~0x00000007;
+ else if ((channel == 1) && connect)
+ temp &= ~(0x00000007 << 6);
+ else if ((channel == 0) && !connect)
+ temp |= 0x00000007;
+ else
+ temp |= (0x00000007 << 6);
+
+ /* Just in case... */
+ temp &= 0x3fffffff;
+
+ GT_REG_WRITE (GALMPSC_ROUTING_REGISTER, temp);
+
+ return 0;
+}
+
+static int galmpsc_route_rx_clock (int channel, int brg)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALMPSC_RxC_ROUTE);
+
+ if (channel == 0) {
+ temp &= ~0x0000000F;
+ temp |= brg;
+ } else {
+ temp &= ~0x00000F00;
+ temp |= (brg << 8);
+ }
+
+ GT_REG_WRITE (GALMPSC_RxC_ROUTE, temp);
+
+ return 0;
+}
+
+static int galmpsc_route_tx_clock (int channel, int brg)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALMPSC_TxC_ROUTE);
+
+ if (channel == 0) {
+ temp &= ~0x0000000F;
+ temp |= brg;
+ } else {
+ temp &= ~0x00000F00;
+ temp |= (brg << 8);
+ }
+
+ GT_REG_WRITE (GALMPSC_TxC_ROUTE, temp);
+
+ return 0;
+}
+
+static int galmpsc_write_config_regs (int mpsc, int mode)
+{
+ if (mode == GALMPSC_UART) {
+ /* Main config reg Low (Null modem, Enable Tx/Rx, UART mode) */
+ GT_REG_WRITE (GALMPSC_MCONF_LOW + (mpsc * GALMPSC_REG_GAP),
+ 0x000004c4);
+
+ /* Main config reg High (32x Rx/Tx clock mode, width=8bits */
+ GT_REG_WRITE (GALMPSC_MCONF_HIGH + (mpsc * GALMPSC_REG_GAP),
+ 0x024003f8);
+ /* 22 2222 1111 */
+ /* 54 3210 9876 */
+ /* 0000 0010 0000 0000 */
+ /* 1 */
+ /* 098 7654 3210 */
+ /* 0000 0011 1111 1000 */
+ } else
+ return -1;
+
+ return 0;
+}
+
+static int galmpsc_config_channel_regs (int mpsc)
+{
+ GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), 0);
+ GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), 0);
+ GT_REG_WRITE (GALMPSC_CHANNELREG_3 + (mpsc * GALMPSC_REG_GAP), 1);
+ GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (mpsc * GALMPSC_REG_GAP), 0);
+ GT_REG_WRITE (GALMPSC_CHANNELREG_5 + (mpsc * GALMPSC_REG_GAP), 0);
+ GT_REG_WRITE (GALMPSC_CHANNELREG_6 + (mpsc * GALMPSC_REG_GAP), 0);
+ GT_REG_WRITE (GALMPSC_CHANNELREG_7 + (mpsc * GALMPSC_REG_GAP), 0);
+ GT_REG_WRITE (GALMPSC_CHANNELREG_8 + (mpsc * GALMPSC_REG_GAP), 0);
+ GT_REG_WRITE (GALMPSC_CHANNELREG_9 + (mpsc * GALMPSC_REG_GAP), 0);
+ GT_REG_WRITE (GALMPSC_CHANNELREG_10 + (mpsc * GALMPSC_REG_GAP), 0);
+
+ galmpsc_set_brkcnt (mpsc, 0x3);
+ galmpsc_set_tcschar (mpsc, 0xab);
+
+ return 0;
+}
+
+static int galmpsc_set_brkcnt (int mpsc, int value)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP));
+ temp &= 0x0000FFFF;
+ temp |= (value << 16);
+ GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), temp);
+
+ return 0;
+}
+
+static int galmpsc_set_tcschar (int mpsc, int value)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP));
+ temp &= 0xFFFF0000;
+ temp |= value;
+ GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), temp);
+
+ return 0;
+}
+
+static int galmpsc_set_char_length (int mpsc, int value)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP));
+ temp &= 0xFFFFCFFF;
+ temp |= (value << 12);
+ GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), temp);
+
+ return 0;
+}
+
+static int galmpsc_set_stop_bit_length (int mpsc, int value)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP));
+ temp &= 0xFFFFBFFF;
+ temp |= (value << 14);
+ GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), temp);
+
+ return 0;
+}
+
+static int galmpsc_set_parity (int mpsc, int value)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
+ if (value != -1) {
+ temp &= 0xFFF3FFF3;
+ temp |= ((value << 18) | (value << 2));
+ temp |= ((value << 17) | (value << 1));
+ } else {
+ temp &= 0xFFF1FFF1;
+ }
+
+ GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
+
+ return 0;
+}
+
+static int galmpsc_enter_hunt (int mpsc)
+{
+ int temp;
+
+ temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
+ temp |= 0x80000000;
+ GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
+
+ while (GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)) &
+ MPSC_ENTER_HUNT) {
+ udelay (1);
+ }
+ return 0;
+}
+
+
+static int galmpsc_shutdown (int mpsc)
+{
+ unsigned int temp;
+
+ /* cause RX abort (clears RX) */
+ temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
+ temp |= MPSC_RX_ABORT | MPSC_TX_ABORT;
+ temp &= ~MPSC_ENTER_HUNT;
+ GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
+
+ GT_REG_WRITE (GALSDMA_0_COM_REG, 0);
+ GT_REG_WRITE (GALSDMA_0_COM_REG, SDMA_TX_ABORT | SDMA_RX_ABORT);
+
+ /* shut down the MPSC */
+ GT_REG_WRITE (GALMPSC_MCONF_LOW, 0);
+ GT_REG_WRITE (GALMPSC_MCONF_HIGH, 0);
+ GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), 0);
+
+ udelay (100);
+
+ /* shut down the sdma engines. */
+ /* reset config to default */
+ GT_REG_WRITE (GALSDMA_0_CONF_REG, 0x000000fc);
+
+ udelay (100);
+
+ /* clear the SDMA current and first TX and RX pointers */
+ GT_REG_WRITE (GALSDMA_0_CUR_RX_PTR, 0);
+ GT_REG_WRITE (GALSDMA_0_CUR_TX_PTR, 0);
+ GT_REG_WRITE (GALSDMA_0_FIR_TX_PTR, 0);
+
+ udelay (100);
+
+ return 0;
+}
+
+static void galsdma_enable_rx (void)
+{
+ int temp;
+
+ /* Enable RX processing */
+ temp = GTREGREAD (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF));
+ temp |= RX_ENABLE;
+ GT_REG_WRITE (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF), temp);
+
+ galmpsc_enter_hunt (CHANNEL);
+}
+
+static int galmpsc_set_snoop (int mpsc, int value)
+{
+ int reg =
+ mpsc ? MPSC_1_ADDRESS_CONTROL_LOW :
+ MPSC_0_ADDRESS_CONTROL_LOW;
+ int temp = GTREGREAD (reg);
+
+ if (value)
+ temp |= (1 << 6) | (1 << 14) | (1 << 22) | (1 << 30);
+ else
+ temp &= ~((1 << 6) | (1 << 14) | (1 << 22) | (1 << 30));
+ GT_REG_WRITE (reg, temp);
+ return 0;
+}
+
+/*******************************************************************************
+* galsdma_set_mem_space - Set MV64460 IDMA memory decoding map.
+*
+* DESCRIPTION:
+* the MV64460 SDMA has its own address decoding map that is de-coupled
+* from the CPU interface address decoding windows. The SDMA channels
+* share four address windows. Each region can be individually configured
+* by this function by associating it to a target interface and setting
+* base and size values.
+*
+* NOTE!!!
+* The size must be in 64Kbyte granularity.
+* The base address must be aligned to the size.
+* The size must be a series of 1s followed by a series of zeros
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* True for success, false otherwise.
+*
+*******************************************************************************/
+
+static int galsdma_set_mem_space (unsigned int memSpace,
+ unsigned int memSpaceTarget,
+ unsigned int memSpaceAttr,
+ unsigned int baseAddress, unsigned int size)
+{
+ unsigned int temp;
+
+ if (size == 0) {
+ GT_RESET_REG_BITS (MV64460_CUNIT_BASE_ADDR_ENABLE_REG,
+ 1 << memSpace);
+ return true;
+ }
+
+ /* The base address must be aligned to the size. */
+ if (baseAddress % size != 0) {
+ return false;
+ }
+ if (size < 0x10000) {
+ return false;
+ }
+
+ /* Align size and base to 64K */
+ baseAddress &= 0xffff0000;
+ size &= 0xffff0000;
+ temp = size >> 16;
+
+ /* Checking that the size is a sequence of '1' followed by a
+ sequence of '0' starting from LSB to MSB. */
+ while ((temp > 0) && (temp & 0x1)) {
+ temp = temp >> 1;
+ }
+
+ if (temp != 0) {
+ GT_REG_WRITE (MV64460_CUNIT_BASE_ADDR_REG0 + memSpace * 8,
+ (baseAddress | memSpaceTarget | memSpaceAttr));
+ GT_REG_WRITE ((MV64460_CUNIT_SIZE0 + memSpace * 8),
+ (size - 1) & 0xffff0000);
+ GT_RESET_REG_BITS (MV64460_CUNIT_BASE_ADDR_ENABLE_REG,
+ 1 << memSpace);
+ } else {
+ /* An invalid size was specified */
+ return false;
+ }
+ return true;
+}
diff --git a/board/prodrive/p3mx/mpsc.h b/board/prodrive/p3mx/mpsc.h
new file mode 100644
index 0000000..a03d1cc
--- /dev/null
+++ b/board/prodrive/p3mx/mpsc.h
@@ -0,0 +1,156 @@
+/*
+ * (C) Copyright 2001
+ * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*************************************************************************
+ * changes for Marvell DB64360 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ ************************************************************************/
+
+
+/*
+ * mpsc.h - header file for MPSC in uart mode (console driver)
+ */
+
+#ifndef __MPSC_H__
+#define __MPSC_H__
+
+/* include actual Galileo defines */
+#include "../../Marvell/include/mv_gen_reg.h"
+
+/* driver related defines */
+
+int mpsc_init(int baud);
+void mpsc_sdma_init(void);
+void mpsc_init2(void);
+int galbrg_set_baudrate(int channel, int rate);
+
+int mpsc_putchar_early(char ch);
+char mpsc_getchar_debug(void);
+int mpsc_test_char_debug(void);
+
+int mpsc_test_char_sdma(void);
+
+extern int (*mpsc_putchar)(char ch);
+extern char (*mpsc_getchar)(void);
+extern int (*mpsc_test_char)(void);
+
+#define CHANNEL CONFIG_MPSC_PORT
+
+#define TX_DESC 5
+#define RX_DESC 20
+
+#define DESC_FIRST 0x00010000
+#define DESC_LAST 0x00020000
+#define DESC_OWNER_BIT 0x80000000
+
+#define TX_DEMAND 0x00800000
+#define TX_STOP 0x00010000
+#define RX_ENABLE 0x00000080
+
+#define SDMA_RX_ABORT (1 << 15)
+#define SDMA_TX_ABORT (1 << 31)
+#define MPSC_TX_ABORT (1 << 7)
+#define MPSC_RX_ABORT (1 << 23)
+#define MPSC_ENTER_HUNT (1 << 31)
+
+/* MPSC defines */
+
+#define GALMPSC_CONNECT 0x1
+#define GALMPSC_DISCONNECT 0x0
+
+#define GALMPSC_UART 0x1
+
+#define GALMPSC_STOP_BITS_1 0x0
+#define GALMPSC_STOP_BITS_2 0x1
+#define GALMPSC_CHAR_LENGTH_8 0x3
+#define GALMPSC_CHAR_LENGTH_7 0x2
+
+#define GALMPSC_PARITY_ODD 0x0
+#define GALMPSC_PARITY_EVEN 0x2
+#define GALMPSC_PARITY_MARK 0x3
+#define GALMPSC_PARITY_SPACE 0x1
+#define GALMPSC_PARITY_NONE -1
+
+#define GALMPSC_SERIAL_MULTIPLEX SERIAL_PORT_MULTIPLEX /* 0xf010 */
+#define GALMPSC_ROUTING_REGISTER MAIN_ROUTING_REGISTER /* 0xb400 */
+#define GALMPSC_RxC_ROUTE RECEIVE_CLOCK_ROUTING_REGISTER /* 0xb404 */
+#define GALMPSC_TxC_ROUTE TRANSMIT_CLOCK_ROUTING_REGISTER /* 0xb408 */
+#define GALMPSC_MCONF_LOW MPSC0_MAIN_CONFIGURATION_LOW /* 0x8000 */
+#define GALMPSC_MCONF_HIGH MPSC0_MAIN_CONFIGURATION_HIGH /* 0x8004 */
+#define GALMPSC_PROTOCONF_REG MPSC0_PROTOCOL_CONFIGURATION /* 0x8008 */
+
+#define GALMPSC_REG_GAP 0x1000
+
+#define GALMPSC_MCONF_CHREG_BASE CHANNEL0_REGISTER1 /* 0x800c */
+#define GALMPSC_CHANNELREG_1 CHANNEL0_REGISTER1 /* 0x800c */
+#define GALMPSC_CHANNELREG_2 CHANNEL0_REGISTER2 /* 0x8010 */
+#define GALMPSC_CHANNELREG_3 CHANNEL0_REGISTER3 /* 0x8014 */
+#define GALMPSC_CHANNELREG_4 CHANNEL0_REGISTER4 /* 0x8018 */
+#define GALMPSC_CHANNELREG_5 CHANNEL0_REGISTER5 /* 0x801c */
+#define GALMPSC_CHANNELREG_6 CHANNEL0_REGISTER6 /* 0x8020 */
+#define GALMPSC_CHANNELREG_7 CHANNEL0_REGISTER7 /* 0x8024 */
+#define GALMPSC_CHANNELREG_8 CHANNEL0_REGISTER8 /* 0x8028 */
+#define GALMPSC_CHANNELREG_9 CHANNEL0_REGISTER9 /* 0x802c */
+#define GALMPSC_CHANNELREG_10 CHANNEL0_REGISTER10 /* 0x8030 */
+#define GALMPSC_CHANNELREG_11 CHANNEL0_REGISTER11 /* 0x8034 */
+
+#define GALSDMA_COMMAND_FIRST (1 << 16)
+#define GALSDMA_COMMAND_LAST (1 << 17)
+#define GALSDMA_COMMAND_ENABLEINT (1 << 23)
+#define GALSDMA_COMMAND_AUTO (1 << 30)
+#define GALSDMA_COMMAND_OWNER (1 << 31)
+
+#define GALSDMA_RX 0
+#define GALSDMA_TX 1
+
+/* CHANNEL2 should be CHANNEL1, according to documentation,
+ * but to work with the current GTREGS file...
+ */
+#define GALSDMA_0_CONF_REG CHANNEL0_CONFIGURATION_REGISTER /* 0x4000 */
+#define GALSDMA_1_CONF_REG CHANNEL2_CONFIGURATION_REGISTER /* 0x6000 */
+#define GALSDMA_0_COM_REG CHANNEL0_COMMAND_REGISTER /* 0x4008 */
+#define GALSDMA_1_COM_REG CHANNEL2_COMMAND_REGISTER /* 0x6008 */
+#define GALSDMA_0_CUR_RX_PTR CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER /* 0x4810 */
+#define GALSDMA_0_CUR_TX_PTR CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER /* 0x4c10 */
+#define GALSDMA_0_FIR_TX_PTR CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER /* 0x4c14 */
+#define GALSDMA_1_CUR_RX_PTR CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER /* 0x6810 */
+#define GALSDMA_1_CUR_TX_PTR CHANNEL2_CURRENT_TX_DESCRIPTOR_POINTER /* 0x6c10 */
+#define GALSDMA_1_FIR_TX_PTR CHANNEL2_FIRST_TX_DESCRIPTOR_POINTER /* 0x6c14 */
+#define GALSDMA_REG_DIFF 0x2000
+
+/* WRONG in gt64260R.h */
+#define GALSDMA_INT_CAUSE 0xb800 /* SDMA_CAUSE */
+#define GALSDMA_INT_MASK 0xb880 /* SDMA_MASK */
+#define GALMPSC_0_INT_CAUSE 0xb804
+#define GALMPSC_0_INT_MASK 0xb884
+
+#define GALSDMA_MODE_UART 0
+#define GALSDMA_MODE_BISYNC 1
+#define GALSDMA_MODE_HDLC 2
+#define GALSDMA_MODE_TRANSPARENT 3
+
+#define GALBRG_0_CONFREG BRG0_CONFIGURATION_REGISTER /* 0xb200 */
+#define GALBRG_REG_GAP 0x0008
+#define GALBRG_0_BTREG BRG0_BAUDE_TUNING_REGISTER /* 0xb204 */
+
+#endif /* __MPSC_H__ */
diff --git a/board/prodrive/p3mx/mv_eth.c b/board/prodrive/p3mx/mv_eth.c
new file mode 100644
index 0000000..8203b3c
--- /dev/null
+++ b/board/prodrive/p3mx/mv_eth.c
@@ -0,0 +1,3344 @@
+/*
+ * (C) Copyright 2003
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ * based on - Driver for MV64460X ethernet ports
+ * Copyright (C) 2002 rabeeh@galileo.co.il
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ 3 the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * mv_eth.c - header file for the polled mode GT ethernet driver
+ */
+#include <common.h>
+#include <net.h>
+#include <malloc.h>
+#include <miiphy.h>
+
+#include "mv_eth.h"
+
+/* enable Debug outputs */
+
+#undef DEBUG_MV_ETH
+
+#ifdef DEBUG_MV_ETH
+#define DEBUG
+#define DP(x) x
+#else
+#define DP(x)
+#endif
+
+/* PHY DFCDL Registers */
+#define ETH_PHY_DFCDL_CONFIG0_REG 0x2100
+#define ETH_PHY_DFCDL_CONFIG1_REG 0x2104
+#define ETH_PHY_DFCDL_ADDR_REG 0x2110
+#define ETH_PHY_DFCDL_DATA0_REG 0x2114
+
+#define PHY_AUTONEGOTIATE_TIMEOUT 4000 /* 4000 ms autonegotiate timeout */
+#define PHY_UPDATE_TIMEOUT 10000
+
+#undef MV64460_CHECKSUM_OFFLOAD
+/*************************************************************************
+* The first part is the high level driver of the gigE ethernet ports. *
+*************************************************************************/
+
+/* Definition for configuring driver */
+/* #define UPDATE_STATS_BY_SOFTWARE */
+#undef MV64460_RX_QUEUE_FILL_ON_TASK
+
+/* Constants */
+#define MAGIC_ETH_RUNNING 8031971
+#define MV64460_INTERNAL_SRAM_SIZE _256K
+#define EXTRA_BYTES 32
+#define WRAP ETH_HLEN + 2 + 4 + 16
+#define BUFFER_MTU dev->mtu + WRAP
+#define INT_CAUSE_UNMASK_ALL 0x0007ffff
+#define INT_CAUSE_UNMASK_ALL_EXT 0x0011ffff
+#ifdef MV64460_RX_FILL_ON_TASK
+#define INT_CAUSE_MASK_ALL 0x00000000
+#define INT_CAUSE_CHECK_BITS INT_CAUSE_UNMASK_ALL
+#define INT_CAUSE_CHECK_BITS_EXT INT_CAUSE_UNMASK_ALL_EXT
+#endif
+
+/* Read/Write to/from MV64460 internal registers */
+#define MV_REG_READ(offset) my_le32_to_cpu(* (volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset))
+#define MV_REG_WRITE(offset,data) *(volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset) = my_cpu_to_le32 (data)
+#define MV_SET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) |= ((unsigned int)my_cpu_to_le32(bits)))
+#define MV_RESET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) &= ~((unsigned int)my_cpu_to_le32(bits)))
+
+#define my_cpu_to_le32(x) my_le32_to_cpu((x))
+
+/* Static function declarations */
+static int mv64460_eth_real_open (struct eth_device *eth);
+static int mv64460_eth_real_stop (struct eth_device *eth);
+static struct net_device_stats *mv64460_eth_get_stats (struct eth_device
+ *dev);
+static void eth_port_init_mac_tables (ETH_PORT eth_port_num);
+static void mv64460_eth_update_stat (struct eth_device *dev);
+bool db64460_eth_start (struct eth_device *eth);
+unsigned int eth_read_mib_counter (ETH_PORT eth_port_num,
+ unsigned int mib_offset);
+int mv64460_eth_receive (struct eth_device *dev);
+
+int mv64460_eth_xmit (struct eth_device *, volatile void *packet, int length);
+
+int mv_miiphy_read(char *devname, unsigned char phy_addr,
+ unsigned char phy_reg, unsigned short *value);
+int mv_miiphy_write(char *devname, unsigned char phy_addr,
+ unsigned char phy_reg, unsigned short value);
+
+int phy_setup_aneg (char *devname, unsigned char addr);
+
+#ifndef UPDATE_STATS_BY_SOFTWARE
+static void mv64460_eth_print_stat (struct eth_device *dev);
+#endif
+/* Processes a received packet */
+extern void NetReceive (volatile uchar *, int);
+
+extern unsigned int INTERNAL_REG_BASE_ADDR;
+
+unsigned long my_le32_to_cpu (unsigned long x)
+{
+ return (((x & 0x000000ffU) << 24) |
+ ((x & 0x0000ff00U) << 8) |
+ ((x & 0x00ff0000U) >> 8) | ((x & 0xff000000U) >> 24));
+}
+
+/*************************************************
+ *Helper functions - used inside the driver only *
+ *************************************************/
+#ifdef DEBUG_MV_ETH
+void print_globals (struct eth_device *dev)
+{
+ printf ("Ethernet PRINT_Globals-Debug function\n");
+ printf ("Base Address for ETH_PORT_INFO: %08x\n",
+ (unsigned int) dev->priv);
+ printf ("Base Address for mv64460_eth_priv: %08x\n",
+ (unsigned int) &(((ETH_PORT_INFO *) dev->priv)->
+ port_private));
+
+ printf ("GT Internal Base Address: %08x\n",
+ INTERNAL_REG_BASE_ADDR);
+ printf ("Base Address for TX-DESCs: %08x Number of allocated Buffers %d\n",
+ (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_tx_desc_area_base[0], MV64460_TX_QUEUE_SIZE);
+ printf ("Base Address for RX-DESCs: %08x Number of allocated Buffers %d\n",
+ (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_rx_desc_area_base[0], MV64460_RX_QUEUE_SIZE);
+ printf ("Base Address for RX-Buffer: %08x allocated Bytes %d\n",
+ (unsigned int) ((ETH_PORT_INFO *) dev->priv)->
+ p_rx_buffer_base[0],
+ (MV64460_RX_QUEUE_SIZE * MV64460_RX_BUFFER_SIZE) + 32);
+ printf ("Base Address for TX-Buffer: %08x allocated Bytes %d\n",
+ (unsigned int) ((ETH_PORT_INFO *) dev->priv)->
+ p_tx_buffer_base[0],
+ (MV64460_TX_QUEUE_SIZE * MV64460_TX_BUFFER_SIZE) + 32);
+}
+#endif
+
+/**********************************************************************
+ * mv64460_eth_print_phy_status
+ *
+ * Prints gigabit ethenret phy status
+ *
+ * Input : pointer to ethernet interface network device structure
+ * Output : N/A
+ **********************************************************************/
+void mv64460_eth_print_phy_status (struct eth_device *dev)
+{
+ struct mv64460_eth_priv *port_private;
+ unsigned int port_num;
+ ETH_PORT_INFO *ethernet_private = (ETH_PORT_INFO *) dev->priv;
+ unsigned int port_status, phy_reg_data;
+
+ port_private =
+ (struct mv64460_eth_priv *) ethernet_private->port_private;
+ port_num = port_private->port_num;
+
+ /* Check Link status on phy */
+ eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
+ if (!(phy_reg_data & 0x20)) {
+ printf ("Ethernet port changed link status to DOWN\n");
+ } else {
+ port_status =
+ MV_REG_READ (MV64460_ETH_PORT_STATUS_REG (port_num));
+ printf ("Ethernet status port %d: Link up", port_num);
+ printf (", %s",
+ (port_status & BIT2) ? "Full Duplex" : "Half Duplex");
+ if (port_status & BIT4)
+ printf (", Speed 1 Gbps");
+ else
+ printf (", %s",
+ (port_status & BIT5) ? "Speed 100 Mbps" :
+ "Speed 10 Mbps");
+ printf ("\n");
+ }
+}
+
+/**********************************************************************
+ * u-boot entry functions for mv64460_eth
+ *
+ **********************************************************************/
+int db64460_eth_probe (struct eth_device *dev)
+{
+ return ((int) db64460_eth_start (dev));
+}
+
+int db64460_eth_poll (struct eth_device *dev)
+{
+ return mv64460_eth_receive (dev);
+}
+
+int db64460_eth_transmit (struct eth_device *dev, volatile void *packet,
+ int length)
+{
+ mv64460_eth_xmit (dev, packet, length);
+ return 0;
+}
+
+void db64460_eth_disable (struct eth_device *dev)
+{
+ mv64460_eth_stop (dev);
+}
+
+#define DFCDL(write,read) ((write << 6) | read)
+unsigned int ethDfcdls[] = {
+ DFCDL(0,0), DFCDL(1,1), DFCDL(2,2), DFCDL(3,3),
+ DFCDL(4,4), DFCDL(5,5), DFCDL(6,6), DFCDL(7,7),
+ DFCDL(8,8), DFCDL(9,9), DFCDL(10,10), DFCDL(11,11),
+ DFCDL(12,12), DFCDL(13,13), DFCDL(14,14), DFCDL(15,15),
+ DFCDL(16,16), DFCDL(17,17), DFCDL(18,18), DFCDL(19,19),
+ DFCDL(20,20), DFCDL(21,21), DFCDL(22,22), DFCDL(23,23),
+ DFCDL(24,24), DFCDL(25,25), DFCDL(26,26), DFCDL(27,27),
+ DFCDL(28,28), DFCDL(29,29), DFCDL(30,30), DFCDL(31,31),
+ DFCDL(32,32), DFCDL(33,33), DFCDL(34,34), DFCDL(35,35),
+ DFCDL(36,36), DFCDL(37,37), DFCDL(38,38), DFCDL(39,39),
+ DFCDL(40,40), DFCDL(41,41), DFCDL(42,42), DFCDL(43,43),
+ DFCDL(44,44), DFCDL(45,45), DFCDL(46,46), DFCDL(47,47),
+ DFCDL(48,48), DFCDL(49,49), DFCDL(50,50), DFCDL(51,51),
+ DFCDL(52,52), DFCDL(53,53), DFCDL(54,54), DFCDL(55,55),
+ DFCDL(56,56), DFCDL(57,57), DFCDL(58,58), DFCDL(59,59),
+ DFCDL(60,60), DFCDL(61,61), DFCDL(62,62), DFCDL(63,63),
+};
+
+void mv_eth_phy_init (void)
+{
+ int i;
+
+ MV_REG_WRITE (ETH_PHY_DFCDL_ADDR_REG, 0);
+
+ for (i = 0; i < 64; i++) {
+ MV_REG_WRITE (ETH_PHY_DFCDL_DATA0_REG, ethDfcdls[i]);
+ }
+
+ MV_REG_WRITE (ETH_PHY_DFCDL_CONFIG0_REG, 0x300000);
+}
+
+void mv6446x_eth_initialize (bd_t * bis)
+{
+ struct eth_device *dev;
+ ETH_PORT_INFO *ethernet_private;
+ struct mv64460_eth_priv *port_private;
+ int devnum, x, temp;
+ char *s, *e, buf[64];
+
+ /* P3M750 only
+ * Set RGMII clock drives strength
+ */
+ temp = MV_REG_READ(0x20A0);
+ temp |= 0x04000080;
+ MV_REG_WRITE(0x20A0, temp);
+
+ mv_eth_phy_init();
+
+ for (devnum = 0; devnum < MV_ETH_DEVS; devnum++) {
+ dev = calloc (sizeof (*dev), 1);
+ if (!dev) {
+ printf ("%s: mv_enet%d allocation failure, %s\n",
+ __FUNCTION__, devnum, "eth_device structure");
+ return;
+ }
+
+ /* must be less than NAMESIZE (16) */
+ sprintf (dev->name, "mv_enet%d", devnum);
+
+#ifdef DEBUG
+ printf ("Initializing %s\n", dev->name);
+#endif
+
+ /* Extract the MAC address from the environment */
+ switch (devnum) {
+ case 0:
+ s = "ethaddr";
+ break;
+ case 1:
+ s = "eth1addr";
+ break;
+ case 2:
+ s = "eth2addr";
+ break;
+ default: /* this should never happen */
+ printf ("%s: Invalid device number %d\n",
+ __FUNCTION__, devnum);
+ return;
+ }
+
+ temp = getenv_r (s, buf, sizeof (buf));
+ s = (temp > 0) ? buf : NULL;
+
+#ifdef DEBUG
+ printf ("Setting MAC %d to %s\n", devnum, s);
+#endif
+ for (x = 0; x < 6; ++x) {
+ dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+ /* ronen - set the MAC addr in the HW */
+ eth_port_uc_addr_set (devnum, dev->enetaddr, 0);
+
+ dev->init = (void *) db64460_eth_probe;
+ dev->halt = (void *) ethernet_phy_reset;
+ dev->send = (void *) db64460_eth_transmit;
+ dev->recv = (void *) db64460_eth_poll;
+
+ ethernet_private = calloc (sizeof (*ethernet_private), 1);
+ dev->priv = (void *)ethernet_private;
+ if (!ethernet_private) {
+ printf ("%s: %s allocation failure, %s\n",
+ __FUNCTION__, dev->name,
+ "Private Device Structure");
+ free (dev);
+ return;
+ }
+ /* start with an zeroed ETH_PORT_INFO */
+ memset (ethernet_private, 0, sizeof (ETH_PORT_INFO));
+ memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6);
+
+ /* set pointer to memory for stats data structure etc... */
+ port_private = calloc (sizeof (*ethernet_private), 1);
+ ethernet_private->port_private = (void *)port_private;
+ if (!port_private) {
+ printf ("%s: %s allocation failure, %s\n",
+ __FUNCTION__, dev->name,
+ "Port Private Device Structure");
+
+ free (ethernet_private);
+ free (dev);
+ return;
+ }
+
+ port_private->stats =
+ calloc (sizeof (struct net_device_stats), 1);
+ if (!port_private->stats) {
+ printf ("%s: %s allocation failure, %s\n",
+ __FUNCTION__, dev->name,
+ "Net stat Structure");
+
+ free (port_private);
+ free (ethernet_private);
+ free (dev);
+ return;
+ }
+ memset (ethernet_private->port_private, 0,
+ sizeof (struct mv64460_eth_priv));
+ switch (devnum) {
+ case 0:
+ ethernet_private->port_num = ETH_0;
+ break;
+ case 1:
+ ethernet_private->port_num = ETH_1;
+ break;
+ case 2:
+ ethernet_private->port_num = ETH_2;
+ break;
+ default:
+ printf ("Invalid device number %d\n", devnum);
+ break;
+ };
+
+ port_private->port_num = devnum;
+ /*
+ * Read MIB counter on the GT in order to reset them,
+ * then zero all the stats fields in memory
+ */
+ mv64460_eth_update_stat (dev);
+ memset (port_private->stats, 0,
+ sizeof (struct net_device_stats));
+ /* Extract the MAC address from the environment */
+ switch (devnum) {
+ case 0:
+ s = "ethaddr";
+ break;
+ case 1:
+ s = "eth1addr";
+ break;
+ case 2:
+ s = "eth2addr";
+ break;
+ default: /* this should never happen */
+ printf ("%s: Invalid device number %d\n",
+ __FUNCTION__, devnum);
+ return;
+ }
+
+ temp = getenv_r (s, buf, sizeof (buf));
+ s = (temp > 0) ? buf : NULL;
+
+#ifdef DEBUG
+ printf ("Setting MAC %d to %s\n", devnum, s);
+#endif
+ for (x = 0; x < 6; ++x) {
+ dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+
+ DP (printf ("Allocating descriptor and buffer rings\n"));
+
+ ethernet_private->p_rx_desc_area_base[0] =
+ (ETH_RX_DESC *) memalign (16,
+ RX_DESC_ALIGNED_SIZE *
+ MV64460_RX_QUEUE_SIZE + 1);
+ ethernet_private->p_tx_desc_area_base[0] =
+ (ETH_TX_DESC *) memalign (16,
+ TX_DESC_ALIGNED_SIZE *
+ MV64460_TX_QUEUE_SIZE + 1);
+
+ ethernet_private->p_rx_buffer_base[0] =
+ (char *) memalign (16,
+ MV64460_RX_QUEUE_SIZE *
+ MV64460_TX_BUFFER_SIZE + 1);
+ ethernet_private->p_tx_buffer_base[0] =
+ (char *) memalign (16,
+ MV64460_RX_QUEUE_SIZE *
+ MV64460_TX_BUFFER_SIZE + 1);
+
+#ifdef DEBUG_MV_ETH
+ /* DEBUG OUTPUT prints adresses of globals */
+ print_globals (dev);
+#endif
+ eth_register (dev);
+
+ miiphy_register(dev->name, mv_miiphy_read, mv_miiphy_write);
+ }
+ DP (printf ("%s: exit\n", __FUNCTION__));
+
+}
+
+/**********************************************************************
+ * mv64460_eth_open
+ *
+ * This function is called when openning the network device. The function
+ * should initialize all the hardware, initialize cyclic Rx/Tx
+ * descriptors chain and buffers and allocate an IRQ to the network
+ * device.
+ *
+ * Input : a pointer to the network device structure
+ * / / ronen - changed the output to match net/eth.c needs
+ * Output : nonzero of success , zero if fails.
+ * under construction
+ **********************************************************************/
+
+int mv64460_eth_open (struct eth_device *dev)
+{
+ return (mv64460_eth_real_open (dev));
+}
+
+/* Helper function for mv64460_eth_open */
+static int mv64460_eth_real_open (struct eth_device *dev)
+{
+
+ unsigned int queue;
+ ETH_PORT_INFO *ethernet_private;
+ struct mv64460_eth_priv *port_private;
+ unsigned int port_num;
+ u32 port_status;
+ ushort reg_short;
+ int speed;
+ int duplex;
+ int i;
+ int reg;
+
+ ethernet_private = (ETH_PORT_INFO *) dev->priv;
+ /* ronen - when we update the MAC env params we only update dev->enetaddr
+ see ./net/eth.c eth_set_enetaddr() */
+ memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6);
+
+ port_private = (struct mv64460_eth_priv *) ethernet_private->port_private;
+ port_num = port_private->port_num;
+
+ /* Stop RX Queues */
+ MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num), 0x0000ff00);
+
+ /* Clear the ethernet port interrupts */
+ MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_REG (port_num), 0);
+ MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0);
+
+ /* Unmask RX buffer and TX end interrupt */
+ MV_REG_WRITE (MV64460_ETH_INTERRUPT_MASK_REG (port_num),
+ INT_CAUSE_UNMASK_ALL);
+
+ /* Unmask phy and link status changes interrupts */
+ MV_REG_WRITE (MV64460_ETH_INTERRUPT_EXTEND_MASK_REG (port_num),
+ INT_CAUSE_UNMASK_ALL_EXT);
+
+ /* Set phy address of the port */
+ ethernet_private->port_phy_addr = 0x1 + (port_num << 1);
+ reg = ethernet_private->port_phy_addr;
+
+ /* Activate the DMA channels etc */
+ eth_port_init (ethernet_private);
+
+ /* "Allocate" setup TX rings */
+
+ for (queue = 0; queue < MV64460_TX_QUEUE_NUM; queue++) {
+ unsigned int size;
+
+ port_private->tx_ring_size[queue] = MV64460_TX_QUEUE_SIZE;
+ size = (port_private->tx_ring_size[queue] * TX_DESC_ALIGNED_SIZE); /*size = no of DESCs times DESC-size */
+ ethernet_private->tx_desc_area_size[queue] = size;
+
+ /* first clear desc area completely */
+ memset ((void *) ethernet_private->p_tx_desc_area_base[queue],
+ 0, ethernet_private->tx_desc_area_size[queue]);
+
+ /* initialize tx desc ring with low level driver */
+ if (ether_init_tx_desc_ring
+ (ethernet_private, ETH_Q0,
+ port_private->tx_ring_size[queue],
+ MV64460_TX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ ,
+ (unsigned int) ethernet_private->
+ p_tx_desc_area_base[queue],
+ (unsigned int) ethernet_private->
+ p_tx_buffer_base[queue]) == false)
+ printf ("### Error initializing TX Ring\n");
+ }
+
+ /* "Allocate" setup RX rings */
+ for (queue = 0; queue < MV64460_RX_QUEUE_NUM; queue++) {
+ unsigned int size;
+
+ /* Meantime RX Ring are fixed - but must be configurable by user */
+ port_private->rx_ring_size[queue] = MV64460_RX_QUEUE_SIZE;
+ size = (port_private->rx_ring_size[queue] *
+ RX_DESC_ALIGNED_SIZE);
+ ethernet_private->rx_desc_area_size[queue] = size;
+
+ /* first clear desc area completely */
+ memset ((void *) ethernet_private->p_rx_desc_area_base[queue],
+ 0, ethernet_private->rx_desc_area_size[queue]);
+ if ((ether_init_rx_desc_ring
+ (ethernet_private, ETH_Q0,
+ port_private->rx_ring_size[queue],
+ MV64460_RX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ ,
+ (unsigned int) ethernet_private->
+ p_rx_desc_area_base[queue],
+ (unsigned int) ethernet_private->
+ p_rx_buffer_base[queue])) == false)
+ printf ("### Error initializing RX Ring\n");
+ }
+
+ eth_port_start (ethernet_private);
+
+ /* Set maximum receive buffer to 9700 bytes */
+ MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (port_num),
+ (0x5 << 17) |
+ (MV_REG_READ
+ (MV64460_ETH_PORT_SERIAL_CONTROL_REG (port_num))
+ & 0xfff1ffff));
+
+ /*
+ * Set ethernet MTU for leaky bucket mechanism to 0 - this will
+ * disable the leaky bucket mechanism .
+ */
+
+ MV_REG_WRITE (MV64460_ETH_MAXIMUM_TRANSMIT_UNIT (port_num), 0);
+ port_status = MV_REG_READ (MV64460_ETH_PORT_STATUS_REG (port_num));
+
+#if defined(CONFIG_PHY_RESET)
+ /*
+ * Reset the phy, only if its the first time through
+ * otherwise, just check the speeds & feeds
+ */
+ if (port_private->first_init == 0) {
+ port_private->first_init = 1;
+ ethernet_phy_reset (port_num);
+
+ /* Start/Restart autonegotiation */
+ phy_setup_aneg (dev->name, reg);
+ udelay (1000);
+ }
+#endif /* defined(CONFIG_PHY_RESET) */
+
+ miiphy_read (dev->name, reg, PHY_BMSR, ®_short);
+
+ /*
+ * Wait if PHY is capable of autonegotiation and autonegotiation is not complete
+ */
+ if ((reg_short & PHY_BMSR_AUTN_ABLE)
+ && !(reg_short & PHY_BMSR_AUTN_COMP)) {
+ puts ("Waiting for PHY auto negotiation to complete");
+ i = 0;
+ while (!(reg_short & PHY_BMSR_AUTN_COMP)) {
+ /*
+ * Timeout reached ?
+ */
+ if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
+ puts (" TIMEOUT !\n");
+ break;
+ }
+
+ if ((i++ % 1000) == 0) {
+ putc ('.');
+ }
+ udelay (1000); /* 1 ms */
+ miiphy_read (dev->name, reg, PHY_BMSR, ®_short);
+
+ }
+ puts (" done\n");
+ udelay (500000); /* another 500 ms (results in faster booting) */
+ }
+
+ speed = miiphy_speed (dev->name, reg);
+ duplex = miiphy_duplex (dev->name, reg);
+
+ printf ("ENET Speed is %d Mbps - %s duplex connection\n",
+ (int) speed, (duplex == HALF) ? "HALF" : "FULL");
+
+ port_private->eth_running = MAGIC_ETH_RUNNING;
+ return 1;
+}
+
+static int mv64460_eth_free_tx_rings (struct eth_device *dev)
+{
+ unsigned int queue;
+ ETH_PORT_INFO *ethernet_private;
+ struct mv64460_eth_priv *port_private;
+ unsigned int port_num;
+ volatile ETH_TX_DESC *p_tx_curr_desc;
+
+ ethernet_private = (ETH_PORT_INFO *) dev->priv;
+ port_private =
+ (struct mv64460_eth_priv *) ethernet_private->port_private;
+ port_num = port_private->port_num;
+
+ /* Stop Tx Queues */
+ MV_REG_WRITE (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG (port_num),
+ 0x0000ff00);
+
+ /* Free TX rings */
+ DP (printf ("Clearing previously allocated TX queues... "));
+ for (queue = 0; queue < MV64460_TX_QUEUE_NUM; queue++) {
+ /* Free on TX rings */
+ for (p_tx_curr_desc =
+ ethernet_private->p_tx_desc_area_base[queue];
+ ((unsigned int) p_tx_curr_desc <= (unsigned int)
+ ethernet_private->p_tx_desc_area_base[queue] +
+ ethernet_private->tx_desc_area_size[queue]);
+ p_tx_curr_desc =
+ (ETH_TX_DESC *) ((unsigned int) p_tx_curr_desc +
+ TX_DESC_ALIGNED_SIZE)) {
+ /* this is inside for loop */
+ if (p_tx_curr_desc->return_info != 0) {
+ p_tx_curr_desc->return_info = 0;
+ DP (printf ("freed\n"));
+ }
+ }
+ DP (printf ("Done\n"));
+ }
+ return 0;
+}
+
+static int mv64460_eth_free_rx_rings (struct eth_device *dev)
+{
+ unsigned int queue;
+ ETH_PORT_INFO *ethernet_private;
+ struct mv64460_eth_priv *port_private;
+ unsigned int port_num;
+ volatile ETH_RX_DESC *p_rx_curr_desc;
+
+ ethernet_private = (ETH_PORT_INFO *) dev->priv;
+ port_private =
+ (struct mv64460_eth_priv *) ethernet_private->port_private;
+ port_num = port_private->port_num;
+
+ /* Stop RX Queues */
+ MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num),
+ 0x0000ff00);
+
+ /* Free RX rings */
+ DP (printf ("Clearing previously allocated RX queues... "));
+ for (queue = 0; queue < MV64460_RX_QUEUE_NUM; queue++) {
+ /* Free preallocated skb's on RX rings */
+ for (p_rx_curr_desc =
+ ethernet_private->p_rx_desc_area_base[queue];
+ (((unsigned int) p_rx_curr_desc <
+ ((unsigned int) ethernet_private->
+ p_rx_desc_area_base[queue] +
+ ethernet_private->rx_desc_area_size[queue])));
+ p_rx_curr_desc =
+ (ETH_RX_DESC *) ((unsigned int) p_rx_curr_desc +
+ RX_DESC_ALIGNED_SIZE)) {
+ if (p_rx_curr_desc->return_info != 0) {
+ p_rx_curr_desc->return_info = 0;
+ DP (printf ("freed\n"));
+ }
+ }
+ DP (printf ("Done\n"));
+ }
+ return 0;
+}
+
+/**********************************************************************
+ * mv64460_eth_stop
+ *
+ * This function is used when closing the network device.
+ * It updates the hardware,
+ * release all memory that holds buffers and descriptors and release the IRQ.
+ * Input : a pointer to the device structure
+ * Output : zero if success , nonzero if fails
+ *********************************************************************/
+
+int mv64460_eth_stop (struct eth_device *dev)
+{
+ ETH_PORT_INFO *ethernet_private;
+ struct mv64460_eth_priv *port_private;
+ unsigned int port_num;
+
+ ethernet_private = (ETH_PORT_INFO *) dev->priv;
+ port_private =
+ (struct mv64460_eth_priv *) ethernet_private->port_private;
+ port_num = port_private->port_num;
+
+ /* Disable all gigE address decoder */
+ MV_REG_WRITE (MV64460_ETH_BASE_ADDR_ENABLE_REG, 0x3f);
+ DP (printf ("%s Ethernet stop called ... \n", __FUNCTION__));
+ mv64460_eth_real_stop (dev);
+
+ return 0;
+};
+
+/* Helper function for mv64460_eth_stop */
+
+static int mv64460_eth_real_stop (struct eth_device *dev)
+{
+ ETH_PORT_INFO *ethernet_private;
+ struct mv64460_eth_priv *port_private;
+ unsigned int port_num;
+
+ ethernet_private = (ETH_PORT_INFO *) dev->priv;
+ port_private =
+ (struct mv64460_eth_priv *) ethernet_private->port_private;
+ port_num = port_private->port_num;
+
+ mv64460_eth_free_tx_rings (dev);
+ mv64460_eth_free_rx_rings (dev);
+
+ eth_port_reset (ethernet_private->port_num);
+ /* Disable ethernet port interrupts */
+ MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_REG (port_num), 0);
+ MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0);
+ /* Mask RX buffer and TX end interrupt */
+ MV_REG_WRITE (MV64460_ETH_INTERRUPT_MASK_REG (port_num), 0);
+ /* Mask phy and link status changes interrupts */
+ MV_REG_WRITE (MV64460_ETH_INTERRUPT_EXTEND_MASK_REG (port_num), 0);
+ MV_RESET_REG_BITS (MV64460_CPU_INTERRUPT0_MASK_HIGH,
+ BIT0 << port_num);
+ /* Print Network statistics */
+#ifndef UPDATE_STATS_BY_SOFTWARE
+ /*
+ * Print statistics (only if ethernet is running),
+ * then zero all the stats fields in memory
+ */
+ if (port_private->eth_running == MAGIC_ETH_RUNNING) {
+ port_private->eth_running = 0;
+ mv64460_eth_print_stat (dev);
+ }
+ memset (port_private->stats, 0, sizeof (struct net_device_stats));
+#endif
+ DP (printf ("\nEthernet stopped ... \n"));
+ return 0;
+}
+
+/**********************************************************************
+ * mv64460_eth_start_xmit
+ *
+ * This function is queues a packet in the Tx descriptor for
+ * required port.
+ *
+ * Input : skb - a pointer to socket buffer
+ * dev - a pointer to the required port
+ *
+ * Output : zero upon success
+ **********************************************************************/
+
+int mv64460_eth_xmit (struct eth_device *dev, volatile void *dataPtr,
+ int dataSize)
+{
+ ETH_PORT_INFO *ethernet_private;
+ struct mv64460_eth_priv *port_private;
+ unsigned int port_num;
+ PKT_INFO pkt_info;
+ ETH_FUNC_RET_STATUS status;
+ struct net_device_stats *stats;
+ ETH_FUNC_RET_STATUS release_result;
+
+ ethernet_private = (ETH_PORT_INFO *) dev->priv;
+ port_private =
+ (struct mv64460_eth_priv *) ethernet_private->port_private;
+ port_num = port_private->port_num;
+
+ stats = port_private->stats;
+
+ /* Update packet info data structure */
+ pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC; /* DMA owned, first last */
+ pkt_info.byte_cnt = dataSize;
+ pkt_info.buf_ptr = (unsigned int) dataPtr;
+ pkt_info.return_info = 0;
+
+ status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info);
+ if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) {
+ printf ("Error on transmitting packet ..");
+ if (status == ETH_QUEUE_FULL)
+ printf ("ETH Queue is full. \n");
+ if (status == ETH_QUEUE_LAST_RESOURCE)
+ printf ("ETH Queue: using last available resource. \n");
+ return 1;
+ }
+
+ /* Update statistics and start of transmittion time */
+ stats->tx_bytes += dataSize;
+ stats->tx_packets++;
+
+ /* Check if packet(s) is(are) transmitted correctly (release everything) */
+ do {
+ release_result =
+ eth_tx_return_desc (ethernet_private, ETH_Q0,
+ &pkt_info);
+ switch (release_result) {
+ case ETH_OK:
+ DP (printf ("descriptor released\n"));
+ if (pkt_info.cmd_sts & BIT0) {
+ printf ("Error in TX\n");
+ stats->tx_errors++;
+ }
+ break;
+ case ETH_RETRY:
+ DP (printf ("transmission still in process\n"));
+ break;
+
+ case ETH_ERROR:
+ printf ("routine can not access Tx desc ring\n");
+ break;
+
+ case ETH_END_OF_JOB:
+ DP (printf ("the routine has nothing to release\n"));
+ break;
+ default: /* should not happen */
+ break;
+ }
+ } while (release_result == ETH_OK);
+
+ return 0; /* success */
+}
+
+/**********************************************************************
+ * mv64460_eth_receive
+ *
+ * This function is forward packets that are received from the port's
+ * queues toward kernel core or FastRoute them to another interface.
+ *
+ * Input : dev - a pointer to the required interface
+ * max - maximum number to receive (0 means unlimted)
+ *
+ * Output : number of served packets
+ **********************************************************************/
+
+int mv64460_eth_receive (struct eth_device *dev)
+{
+ ETH_PORT_INFO *ethernet_private;
+ struct mv64460_eth_priv *port_private;
+ unsigned int port_num;
+ PKT_INFO pkt_info;
+ struct net_device_stats *stats;
+
+ ethernet_private = (ETH_PORT_INFO *) dev->priv;
+ port_private = (struct mv64460_eth_priv *) ethernet_private->port_private;
+ port_num = port_private->port_num;
+ stats = port_private->stats;
+
+ while ((eth_port_receive (ethernet_private, ETH_Q0, &pkt_info) == ETH_OK)) {
+#ifdef DEBUG_MV_ETH
+ if (pkt_info.byte_cnt != 0) {
+ printf ("%s: Received %d byte Packet @ 0x%x\n",
+ __FUNCTION__, pkt_info.byte_cnt,
+ pkt_info.buf_ptr);
+ if(pkt_info.buf_ptr != 0){
+ for(i=0; i < pkt_info.byte_cnt; i++){
+ if((i % 4) == 0){
+ printf("\n0x");
+ }
+ printf("%02x", ((char*)pkt_info.buf_ptr)[i]);
+ }
+ printf("\n");
+ }
+ }
+#endif
+ /* Update statistics. Note byte count includes 4 byte CRC count */
+ stats->rx_packets++;
+ stats->rx_bytes += pkt_info.byte_cnt;
+
+ /*
+ * In case received a packet without first / last bits on OR the error
+ * summary bit is on, the packets needs to be dropeed.
+ */
+ if (((pkt_info.
+ cmd_sts & (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC)) !=
+ (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC))
+ || (pkt_info.cmd_sts & ETH_ERROR_SUMMARY)) {
+ stats->rx_dropped++;
+
+ printf ("Received packet spread on multiple descriptors\n");
+
+ /* Is this caused by an error ? */
+ if (pkt_info.cmd_sts & ETH_ERROR_SUMMARY) {
+ stats->rx_errors++;
+ }
+
+ /* free these descriptors again without forwarding them to the higher layers */
+ pkt_info.buf_ptr &= ~0x7; /* realign buffer again */
+ pkt_info.byte_cnt = 0x0000; /* Reset Byte count */
+
+ if (eth_rx_return_buff
+ (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) {
+ printf ("Error while returning the RX Desc to Ring\n");
+ } else {
+ DP (printf ("RX Desc returned to Ring\n"));
+ }
+ /* /free these descriptors again */
+ } else {
+
+/* !!! call higher layer processing */
+#ifdef DEBUG_MV_ETH
+ printf ("\nNow send it to upper layer protocols (NetReceive) ...\n");
+#endif
+ /* let the upper layer handle the packet */
+ NetReceive ((uchar *) pkt_info.buf_ptr,
+ (int) pkt_info.byte_cnt);
+
+/* **************************************************************** */
+/* free descriptor */
+ pkt_info.buf_ptr &= ~0x7; /* realign buffer again */
+ pkt_info.byte_cnt = 0x0000; /* Reset Byte count */
+ DP (printf ("RX: pkt_info.buf_ptr = %x\n", pkt_info.buf_ptr));
+ if (eth_rx_return_buff
+ (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) {
+ printf ("Error while returning the RX Desc to Ring\n");
+ } else {
+ DP (printf ("RX: Desc returned to Ring\n"));
+ }
+
+/* **************************************************************** */
+
+ }
+ }
+ mv64460_eth_get_stats (dev); /* update statistics */
+ return 1;
+}
+
+/**********************************************************************
+ * mv64460_eth_get_stats
+ *
+ * Returns a pointer to the interface statistics.
+ *
+ * Input : dev - a pointer to the required interface
+ *
+ * Output : a pointer to the interface's statistics
+ **********************************************************************/
+
+static struct net_device_stats *mv64460_eth_get_stats (struct eth_device *dev)
+{
+ ETH_PORT_INFO *ethernet_private;
+ struct mv64460_eth_priv *port_private;
+ unsigned int port_num;
+
+ ethernet_private = (ETH_PORT_INFO *) dev->priv;
+ port_private =
+ (struct mv64460_eth_priv *) ethernet_private->port_private;
+ port_num = port_private->port_num;
+
+ mv64460_eth_update_stat (dev);
+
+ return port_private->stats;
+}
+
+/**********************************************************************
+ * mv64460_eth_update_stat
+ *
+ * Update the statistics structure in the private data structure
+ *
+ * Input : pointer to ethernet interface network device structure
+ * Output : N/A
+ **********************************************************************/
+
+static void mv64460_eth_update_stat (struct eth_device *dev)
+{
+ ETH_PORT_INFO *ethernet_private;
+ struct mv64460_eth_priv *port_private;
+ struct net_device_stats *stats;
+ unsigned int port_num;
+ volatile unsigned int dummy;
+
+ ethernet_private = (ETH_PORT_INFO *) dev->priv;
+ port_private =
+ (struct mv64460_eth_priv *) ethernet_private->port_private;
+ port_num = port_private->port_num;
+ stats = port_private->stats;
+
+ /* These are false updates */
+ stats->rx_packets += (unsigned long)
+ eth_read_mib_counter (ethernet_private->port_num,
+ ETH_MIB_GOOD_FRAMES_RECEIVED);
+ stats->tx_packets += (unsigned long)
+ eth_read_mib_counter (ethernet_private->port_num,
+ ETH_MIB_GOOD_FRAMES_SENT);
+ stats->rx_bytes += (unsigned long)
+ eth_read_mib_counter (ethernet_private->port_num,
+ ETH_MIB_GOOD_OCTETS_RECEIVED_LOW);
+ /*
+ * Ideally this should be as follows -
+ *
+ * stats->rx_bytes += stats->rx_bytes +
+ * ((unsigned long) ethReadMibCounter (ethernet_private->port_num ,
+ * ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH) << 32);
+ *
+ * But the unsigned long in PowerPC and MIPS are 32bit. So the next read
+ * is just a dummy read for proper work of the GigE port
+ */
+ dummy = eth_read_mib_counter (ethernet_private->port_num,
+ ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH);
+ stats->tx_bytes += (unsigned long)
+ eth_read_mib_counter (ethernet_private->port_num,
+ ETH_MIB_GOOD_OCTETS_SENT_LOW);
+ dummy = eth_read_mib_counter (ethernet_private->port_num,
+ ETH_MIB_GOOD_OCTETS_SENT_HIGH);
+ stats->rx_errors += (unsigned long)
+ eth_read_mib_counter (ethernet_private->port_num,
+ ETH_MIB_MAC_RECEIVE_ERROR);
+
+ /* Rx dropped is for received packet with CRC error */
+ stats->rx_dropped +=
+ (unsigned long) eth_read_mib_counter (ethernet_private->
+ port_num,
+ ETH_MIB_BAD_CRC_EVENT);
+ stats->multicast += (unsigned long)
+ eth_read_mib_counter (ethernet_private->port_num,
+ ETH_MIB_MULTICAST_FRAMES_RECEIVED);
+ stats->collisions +=
+ (unsigned long) eth_read_mib_counter (ethernet_private->
+ port_num,
+ ETH_MIB_COLLISION) +
+ (unsigned long) eth_read_mib_counter (ethernet_private->
+ port_num,
+ ETH_MIB_LATE_COLLISION);
+ /* detailed rx errors */
+ stats->rx_length_errors +=
+ (unsigned long) eth_read_mib_counter (ethernet_private->
+ port_num,
+ ETH_MIB_UNDERSIZE_RECEIVED)
+ +
+ (unsigned long) eth_read_mib_counter (ethernet_private->
+ port_num,
+ ETH_MIB_OVERSIZE_RECEIVED);
+ /* detailed tx errors */
+}
+
+#ifndef UPDATE_STATS_BY_SOFTWARE
+/**********************************************************************
+ * mv64460_eth_print_stat
+ *
+ * Update the statistics structure in the private data structure
+ *
+ * Input : pointer to ethernet interface network device structure
+ * Output : N/A
+ **********************************************************************/
+
+static void mv64460_eth_print_stat (struct eth_device *dev)
+{
+ ETH_PORT_INFO *ethernet_private;
+ struct mv64460_eth_priv *port_private;
+ struct net_device_stats *stats;
+ unsigned int port_num;
+
+ ethernet_private = (ETH_PORT_INFO *) dev->priv;
+ port_private =
+ (struct mv64460_eth_priv *) ethernet_private->port_private;
+ port_num = port_private->port_num;
+ stats = port_private->stats;
+
+ /* These are false updates */
+ printf ("\n### Network statistics: ###\n");
+ printf ("--------------------------\n");
+ printf (" Packets received: %ld\n", stats->rx_packets);
+ printf (" Packets send: %ld\n", stats->tx_packets);
+ printf (" Received bytes: %ld\n", stats->rx_bytes);
+ printf (" Send bytes: %ld\n", stats->tx_bytes);
+ if (stats->rx_errors != 0)
+ printf (" Rx Errors: %ld\n",
+ stats->rx_errors);
+ if (stats->rx_dropped != 0)
+ printf (" Rx dropped (CRC Errors): %ld\n",
+ stats->rx_dropped);
+ if (stats->multicast != 0)
+ printf (" Rx mulicast frames: %ld\n",
+ stats->multicast);
+ if (stats->collisions != 0)
+ printf (" No. of collisions: %ld\n",
+ stats->collisions);
+ if (stats->rx_length_errors != 0)
+ printf (" Rx length errors: %ld\n",
+ stats->rx_length_errors);
+}
+#endif
+
+/**************************************************************************
+ *network_start - Network Kick Off Routine UBoot
+ *Inputs :
+ *Outputs :
+ **************************************************************************/
+
+bool db64460_eth_start (struct eth_device *dev)
+{
+ return (mv64460_eth_open (dev)); /* calls real open */
+}
+
+/*************************************************************************
+**************************************************************************
+**************************************************************************
+* The second part is the low level driver of the gigE ethernet ports. *
+**************************************************************************
+**************************************************************************
+*************************************************************************/
+/*
+ * based on Linux code
+ * arch/ppc/galileo/EVB64460/mv64460_eth.c - Driver for MV64460X ethernet ports
+ * Copyright (C) 2002 rabeeh@galileo.co.il
+
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+/********************************************************************************
+ * Marvell's Gigabit Ethernet controller low level driver
+ *
+ * DESCRIPTION:
+ * This file introduce low level API to Marvell's Gigabit Ethernet
+ * controller. This Gigabit Ethernet Controller driver API controls
+ * 1) Operations (i.e. port init, start, reset etc').
+ * 2) Data flow (i.e. port send, receive etc').
+ * Each Gigabit Ethernet port is controlled via ETH_PORT_INFO
+ * struct.
+ * This struct includes user configuration information as well as
+ * driver internal data needed for its operations.
+ *
+ * Supported Features:
+ * - This low level driver is OS independent. Allocating memory for
+ * the descriptor rings and buffers are not within the scope of
+ * this driver.
+ * - The user is free from Rx/Tx queue managing.
+ * - This low level driver introduce functionality API that enable
+ * the to operate Marvell's Gigabit Ethernet Controller in a
+ * convenient way.
+ * - Simple Gigabit Ethernet port operation API.
+ * - Simple Gigabit Ethernet port data flow API.
+ * - Data flow and operation API support per queue functionality.
+ * - Support cached descriptors for better performance.
+ * - Enable access to all four DRAM banks and internal SRAM memory
+ * spaces.
+ * - PHY access and control API.
+ * - Port control register configuration API.
+ * - Full control over Unicast and Multicast MAC configurations.
+ *
+ * Operation flow:
+ *
+ * Initialization phase
+ * This phase complete the initialization of the ETH_PORT_INFO
+ * struct.
+ * User information regarding port configuration has to be set
+ * prior to calling the port initialization routine. For example,
+ * the user has to assign the port_phy_addr field which is board
+ * depended parameter.
+ * In this phase any port Tx/Rx activity is halted, MIB counters
+ * are cleared, PHY address is set according to user parameter and
+ * access to DRAM and internal SRAM memory spaces.
+ *
+ * Driver ring initialization
+ * Allocating memory for the descriptor rings and buffers is not
+ * within the scope of this driver. Thus, the user is required to
+ * allocate memory for the descriptors ring and buffers. Those
+ * memory parameters are used by the Rx and Tx ring initialization
+ * routines in order to curve the descriptor linked list in a form
+ * of a ring.
+ * Note: Pay special attention to alignment issues when using
+ * cached descriptors/buffers. In this phase the driver store
+ * information in the ETH_PORT_INFO struct regarding each queue
+ * ring.
+ *
+ * Driver start
+ * This phase prepares the Ethernet port for Rx and Tx activity.
+ * It uses the information stored in the ETH_PORT_INFO struct to
+ * initialize the various port registers.
+ *
+ * Data flow:
+ * All packet references to/from the driver are done using PKT_INFO
+ * struct.
+ * This struct is a unified struct used with Rx and Tx operations.
+ * This way the user is not required to be familiar with neither
+ * Tx nor Rx descriptors structures.
+ * The driver's descriptors rings are management by indexes.
+ * Those indexes controls the ring resources and used to indicate
+ * a SW resource error:
+ * 'current'
+ * This index points to the current available resource for use. For
+ * example in Rx process this index will point to the descriptor
+ * that will be passed to the user upon calling the receive routine.
+ * In Tx process, this index will point to the descriptor
+ * that will be assigned with the user packet info and transmitted.
+ * 'used'
+ * This index points to the descriptor that need to restore its
+ * resources. For example in Rx process, using the Rx buffer return
+ * API will attach the buffer returned in packet info to the
+ * descriptor pointed by 'used'. In Tx process, using the Tx
+ * descriptor return will merely return the user packet info with
+ * the command status of the transmitted buffer pointed by the
+ * 'used' index. Nevertheless, it is essential to use this routine
+ * to update the 'used' index.
+ * 'first'
+ * This index supports Tx Scatter-Gather. It points to the first
+ * descriptor of a packet assembled of multiple buffers. For example
+ * when in middle of Such packet we have a Tx resource error the
+ * 'curr' index get the value of 'first' to indicate that the ring
+ * returned to its state before trying to transmit this packet.
+ *
+ * Receive operation:
+ * The eth_port_receive API set the packet information struct,
+ * passed by the caller, with received information from the
+ * 'current' SDMA descriptor.
+ * It is the user responsibility to return this resource back
+ * to the Rx descriptor ring to enable the reuse of this source.
+ * Return Rx resource is done using the eth_rx_return_buff API.
+ *
+ * Transmit operation:
+ * The eth_port_send API supports Scatter-Gather which enables to
+ * send a packet spanned over multiple buffers. This means that
+ * for each packet info structure given by the user and put into
+ * the Tx descriptors ring, will be transmitted only if the 'LAST'
+ * bit will be set in the packet info command status field. This
+ * API also consider restriction regarding buffer alignments and
+ * sizes.
+ * The user must return a Tx resource after ensuring the buffer
+ * has been transmitted to enable the Tx ring indexes to update.
+ *
+ * BOARD LAYOUT
+ * This device is on-board. No jumper diagram is necessary.
+ *
+ * EXTERNAL INTERFACE
+ *
+ * Prior to calling the initialization routine eth_port_init() the user
+ * must set the following fields under ETH_PORT_INFO struct:
+ * port_num User Ethernet port number.
+ * port_phy_addr User PHY address of Ethernet port.
+ * port_mac_addr[6] User defined port MAC address.
+ * port_config User port configuration value.
+ * port_config_extend User port config extend value.
+ * port_sdma_config User port SDMA config value.
+ * port_serial_control User port serial control value.
+ * *port_virt_to_phys () User function to cast virtual addr to CPU bus addr.
+ * *port_private User scratch pad for user specific data structures.
+ *
+ * This driver introduce a set of default values:
+ * PORT_CONFIG_VALUE Default port configuration value
+ * PORT_CONFIG_EXTEND_VALUE Default port extend configuration value
+ * PORT_SDMA_CONFIG_VALUE Default sdma control value
+ * PORT_SERIAL_CONTROL_VALUE Default port serial control value
+ *
+ * This driver data flow is done using the PKT_INFO struct which is
+ * a unified struct for Rx and Tx operations:
+ * byte_cnt Tx/Rx descriptor buffer byte count.
+ * l4i_chk CPU provided TCP Checksum. For Tx operation only.
+ * cmd_sts Tx/Rx descriptor command status.
+ * buf_ptr Tx/Rx descriptor buffer pointer.
+ * return_info Tx/Rx user resource return information.
+ *
+ *
+ * EXTERNAL SUPPORT REQUIREMENTS
+ *
+ * This driver requires the following external support:
+ *
+ * D_CACHE_FLUSH_LINE (address, address offset)
+ *
+ * This macro applies assembly code to flush and invalidate cache
+ * line.
+ * address - address base.
+ * address offset - address offset
+ *
+ *
+ * CPU_PIPE_FLUSH
+ *
+ * This macro applies assembly code to flush the CPU pipeline.
+ *
+ *******************************************************************************/
+/* includes */
+
+/* defines */
+/* SDMA command macros */
+#define ETH_ENABLE_TX_QUEUE(tx_queue, eth_port) \
+ MV_REG_WRITE(MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port), (1 << tx_queue))
+
+#define ETH_DISABLE_TX_QUEUE(tx_queue, eth_port) \
+ MV_REG_WRITE(MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port),\
+ (1 << (8 + tx_queue)))
+
+#define ETH_ENABLE_RX_QUEUE(rx_queue, eth_port) \
+MV_REG_WRITE(MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << rx_queue))
+
+#define ETH_DISABLE_RX_QUEUE(rx_queue, eth_port) \
+MV_REG_WRITE(MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << (8 + rx_queue)))
+
+#define CURR_RFD_GET(p_curr_desc, queue) \
+ ((p_curr_desc) = p_eth_port_ctrl->p_rx_curr_desc_q[queue])
+
+#define CURR_RFD_SET(p_curr_desc, queue) \
+ (p_eth_port_ctrl->p_rx_curr_desc_q[queue] = (p_curr_desc))
+
+#define USED_RFD_GET(p_used_desc, queue) \
+ ((p_used_desc) = p_eth_port_ctrl->p_rx_used_desc_q[queue])
+
+#define USED_RFD_SET(p_used_desc, queue)\
+(p_eth_port_ctrl->p_rx_used_desc_q[queue] = (p_used_desc))
+
+
+#define CURR_TFD_GET(p_curr_desc, queue) \
+ ((p_curr_desc) = p_eth_port_ctrl->p_tx_curr_desc_q[queue])
+
+#define CURR_TFD_SET(p_curr_desc, queue) \
+ (p_eth_port_ctrl->p_tx_curr_desc_q[queue] = (p_curr_desc))
+
+#define USED_TFD_GET(p_used_desc, queue) \
+ ((p_used_desc) = p_eth_port_ctrl->p_tx_used_desc_q[queue])
+
+#define USED_TFD_SET(p_used_desc, queue) \
+ (p_eth_port_ctrl->p_tx_used_desc_q[queue] = (p_used_desc))
+
+#define FIRST_TFD_GET(p_first_desc, queue) \
+ ((p_first_desc) = p_eth_port_ctrl->p_tx_first_desc_q[queue])
+
+#define FIRST_TFD_SET(p_first_desc, queue) \
+ (p_eth_port_ctrl->p_tx_first_desc_q[queue] = (p_first_desc))
+
+
+/* Macros that save access to desc in order to find next desc pointer */
+#define RX_NEXT_DESC_PTR(p_rx_desc, queue) (ETH_RX_DESC*)(((((unsigned int)p_rx_desc - (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue]) + RX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->rx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue])
+
+#define TX_NEXT_DESC_PTR(p_tx_desc, queue) (ETH_TX_DESC*)(((((unsigned int)p_tx_desc - (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue]) + TX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->tx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue])
+
+#define LINK_UP_TIMEOUT 100000
+#define PHY_BUSY_TIMEOUT 10000000
+
+/* locals */
+
+/* PHY routines */
+static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr);
+static int ethernet_phy_get (ETH_PORT eth_port_num);
+
+/* Ethernet Port routines */
+static void eth_set_access_control (ETH_PORT eth_port_num,
+ ETH_WIN_PARAM * param);
+static bool eth_port_uc_addr (ETH_PORT eth_port_num, unsigned char uc_nibble,
+ ETH_QUEUE queue, int option);
+#if 0 /* FIXME */
+static bool eth_port_smc_addr (ETH_PORT eth_port_num,
+ unsigned char mc_byte,
+ ETH_QUEUE queue, int option);
+static bool eth_port_omc_addr (ETH_PORT eth_port_num,
+ unsigned char crc8,
+ ETH_QUEUE queue, int option);
+#endif
+
+static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr,
+ int byte_count);
+
+void eth_dbg (ETH_PORT_INFO * p_eth_port_ctrl);
+
+
+typedef enum _memory_bank { BANK0, BANK1, BANK2, BANK3 } MEMORY_BANK;
+u32 mv_get_dram_bank_base_addr (MEMORY_BANK bank)
+{
+ u32 result = 0;
+ u32 enable = MV_REG_READ (MV64460_BASE_ADDR_ENABLE);
+
+ if (enable & (1 << bank))
+ return 0;
+ if (bank == BANK0)
+ result = MV_REG_READ (MV64460_CS_0_BASE_ADDR);
+ if (bank == BANK1)
+ result = MV_REG_READ (MV64460_CS_1_BASE_ADDR);
+ if (bank == BANK2)
+ result = MV_REG_READ (MV64460_CS_2_BASE_ADDR);
+ if (bank == BANK3)
+ result = MV_REG_READ (MV64460_CS_3_BASE_ADDR);
+ result &= 0x0000ffff;
+ result = result << 16;
+ return result;
+}
+
+u32 mv_get_dram_bank_size (MEMORY_BANK bank)
+{
+ u32 result = 0;
+ u32 enable = MV_REG_READ (MV64460_BASE_ADDR_ENABLE);
+
+ if (enable & (1 << bank))
+ return 0;
+ if (bank == BANK0)
+ result = MV_REG_READ (MV64460_CS_0_SIZE);
+ if (bank == BANK1)
+ result = MV_REG_READ (MV64460_CS_1_SIZE);
+ if (bank == BANK2)
+ result = MV_REG_READ (MV64460_CS_2_SIZE);
+ if (bank == BANK3)
+ result = MV_REG_READ (MV64460_CS_3_SIZE);
+ result += 1;
+ result &= 0x0000ffff;
+ result = result << 16;
+ return result;
+}
+
+u32 mv_get_internal_sram_base (void)
+{
+ u32 result;
+
+ result = MV_REG_READ (MV64460_INTEGRATED_SRAM_BASE_ADDR);
+ result &= 0x0000ffff;
+ result = result << 16;
+ return result;
+}
+
+/*******************************************************************************
+* eth_port_init - Initialize the Ethernet port driver
+*
+* DESCRIPTION:
+* This function prepares the ethernet port to start its activity:
+* 1) Completes the ethernet port driver struct initialization toward port
+* start routine.
+* 2) Resets the device to a quiescent state in case of warm reboot.
+* 3) Enable SDMA access to all four DRAM banks as well as internal SRAM.
+* 4) Clean MAC tables. The reset status of those tables is unknown.
+* 5) Set PHY address.
+* Note: Call this routine prior to eth_port_start routine and after setting
+* user values in the user fields of Ethernet port control struct (i.e.
+* port_phy_addr).
+*
+* INPUT:
+* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct
+*
+* OUTPUT:
+* See description.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl)
+{
+ int queue;
+ ETH_WIN_PARAM win_param;
+
+ p_eth_port_ctrl->port_config = PORT_CONFIG_VALUE;
+ p_eth_port_ctrl->port_config_extend = PORT_CONFIG_EXTEND_VALUE;
+ p_eth_port_ctrl->port_sdma_config = PORT_SDMA_CONFIG_VALUE;
+ p_eth_port_ctrl->port_serial_control = PORT_SERIAL_CONTROL_VALUE;
+
+ p_eth_port_ctrl->port_rx_queue_command = 0;
+ p_eth_port_ctrl->port_tx_queue_command = 0;
+
+ /* Zero out SW structs */
+ for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) {
+ CURR_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue);
+ USED_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue);
+ p_eth_port_ctrl->rx_resource_err[queue] = false;
+ }
+
+ for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) {
+ CURR_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
+ USED_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
+ FIRST_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
+ p_eth_port_ctrl->tx_resource_err[queue] = false;
+ }
+
+ eth_port_reset (p_eth_port_ctrl->port_num);
+
+ /* Set access parameters for DRAM bank 0 */
+ win_param.win = ETH_WIN0; /* Use Ethernet window 0 */
+ win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */
+ win_param.attributes = EBAR_ATTR_DRAM_CS0; /* Enable DRAM bank */
+#ifndef CONFIG_NOT_COHERENT_CACHE
+ win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
+#endif
+ win_param.high_addr = 0;
+ /* Get bank base */
+ win_param.base_addr = mv_get_dram_bank_base_addr (BANK0);
+ win_param.size = mv_get_dram_bank_size (BANK0); /* Get bank size */
+ if (win_param.size == 0)
+ win_param.enable = 0;
+ else
+ win_param.enable = 1; /* Enable the access */
+ win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */
+
+ /* Set the access control for address window (EPAPR) READ & WRITE */
+ eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
+
+ /* Set access parameters for DRAM bank 1 */
+ win_param.win = ETH_WIN1; /* Use Ethernet window 1 */
+ win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */
+ win_param.attributes = EBAR_ATTR_DRAM_CS1; /* Enable DRAM bank */
+#ifndef CONFIG_NOT_COHERENT_CACHE
+ win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
+#endif
+ win_param.high_addr = 0;
+ /* Get bank base */
+ win_param.base_addr = mv_get_dram_bank_base_addr (BANK1);
+ win_param.size = mv_get_dram_bank_size (BANK1); /* Get bank size */
+ if (win_param.size == 0)
+ win_param.enable = 0;
+ else
+ win_param.enable = 1; /* Enable the access */
+ win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */
+
+ /* Set the access control for address window (EPAPR) READ & WRITE */
+ eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
+
+ /* Set access parameters for DRAM bank 2 */
+ win_param.win = ETH_WIN2; /* Use Ethernet window 2 */
+ win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */
+ win_param.attributes = EBAR_ATTR_DRAM_CS2; /* Enable DRAM bank */
+#ifndef CONFIG_NOT_COHERENT_CACHE
+ win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
+#endif
+ win_param.high_addr = 0;
+ /* Get bank base */
+ win_param.base_addr = mv_get_dram_bank_base_addr (BANK2);
+ win_param.size = mv_get_dram_bank_size (BANK2); /* Get bank size */
+ if (win_param.size == 0)
+ win_param.enable = 0;
+ else
+ win_param.enable = 1; /* Enable the access */
+ win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */
+
+ /* Set the access control for address window (EPAPR) READ & WRITE */
+ eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
+
+ /* Set access parameters for DRAM bank 3 */
+ win_param.win = ETH_WIN3; /* Use Ethernet window 3 */
+ win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */
+ win_param.attributes = EBAR_ATTR_DRAM_CS3; /* Enable DRAM bank */
+#ifndef CONFIG_NOT_COHERENT_CACHE
+ win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
+#endif
+ win_param.high_addr = 0;
+ /* Get bank base */
+ win_param.base_addr = mv_get_dram_bank_base_addr (BANK3);
+ win_param.size = mv_get_dram_bank_size (BANK3); /* Get bank size */
+ if (win_param.size == 0)
+ win_param.enable = 0;
+ else
+ win_param.enable = 1; /* Enable the access */
+ win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */
+
+ /* Set the access control for address window (EPAPR) READ & WRITE */
+ eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
+
+ /* Set access parameters for Internal SRAM */
+ win_param.win = ETH_WIN4; /* Use Ethernet window 0 */
+ win_param.target = EBAR_TARGET_CBS; /* Target - Internal SRAM */
+ win_param.attributes = EBAR_ATTR_CBS_SRAM | EBAR_ATTR_CBS_SRAM_BLOCK0;
+ win_param.high_addr = 0;
+ win_param.base_addr = mv_get_internal_sram_base (); /* Get base addr */
+ win_param.size = MV64460_INTERNAL_SRAM_SIZE; /* Get bank size */
+ win_param.enable = 1; /* Enable the access */
+ win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */
+
+ /* Set the access control for address window (EPAPR) READ & WRITE */
+ eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
+
+ eth_port_init_mac_tables (p_eth_port_ctrl->port_num);
+
+ ethernet_phy_set (p_eth_port_ctrl->port_num,
+ p_eth_port_ctrl->port_phy_addr);
+
+ return;
+
+}
+
+/*******************************************************************************
+* eth_port_start - Start the Ethernet port activity.
+*
+* DESCRIPTION:
+* This routine prepares the Ethernet port for Rx and Tx activity:
+* 1. Initialize Tx and Rx Current Descriptor Pointer for each queue that
+* has been initialized a descriptor's ring (using ether_init_tx_desc_ring
+* for Tx and ether_init_rx_desc_ring for Rx)
+* 2. Initialize and enable the Ethernet configuration port by writing to
+* the port's configuration and command registers.
+* 3. Initialize and enable the SDMA by writing to the SDMA's
+* configuration and command registers.
+* After completing these steps, the ethernet port SDMA can starts to
+* perform Rx and Tx activities.
+*
+* Note: Each Rx and Tx queue descriptor's list must be initialized prior
+* to calling this function (use ether_init_tx_desc_ring for Tx queues and
+* ether_init_rx_desc_ring for Rx queues).
+*
+* INPUT:
+* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct
+*
+* OUTPUT:
+* Ethernet port is ready to receive and transmit.
+*
+* RETURN:
+* false if the port PHY is not up.
+* true otherwise.
+*
+*******************************************************************************/
+static bool eth_port_start (ETH_PORT_INFO * p_eth_port_ctrl)
+{
+ int queue;
+ volatile ETH_TX_DESC *p_tx_curr_desc;
+ volatile ETH_RX_DESC *p_rx_curr_desc;
+ unsigned int phy_reg_data;
+ ETH_PORT eth_port_num = p_eth_port_ctrl->port_num;
+
+ /* Assignment of Tx CTRP of given queue */
+ for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) {
+ CURR_TFD_GET (p_tx_curr_desc, queue);
+ MV_REG_WRITE ((MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_0
+ (eth_port_num)
+ + (4 * queue)),
+ ((unsigned int) p_tx_curr_desc));
+
+ }
+
+ /* Assignment of Rx CRDP of given queue */
+ for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) {
+ CURR_RFD_GET (p_rx_curr_desc, queue);
+ MV_REG_WRITE ((MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_0
+ (eth_port_num)
+ + (4 * queue)),
+ ((unsigned int) p_rx_curr_desc));
+
+ if (p_rx_curr_desc != NULL)
+ /* Add the assigned Ethernet address to the port's address table */
+ eth_port_uc_addr_set (p_eth_port_ctrl->port_num,
+ p_eth_port_ctrl->port_mac_addr,
+ queue);
+ }
+
+ /* Assign port configuration and command. */
+ MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_REG (eth_port_num),
+ p_eth_port_ctrl->port_config);
+
+ MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_EXTEND_REG (eth_port_num),
+ p_eth_port_ctrl->port_config_extend);
+
+ MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
+ p_eth_port_ctrl->port_serial_control);
+
+ MV_SET_REG_BITS (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
+ ETH_SERIAL_PORT_ENABLE);
+
+ /* Assign port SDMA configuration */
+ MV_REG_WRITE (MV64460_ETH_SDMA_CONFIG_REG (eth_port_num),
+ p_eth_port_ctrl->port_sdma_config);
+
+ MV_REG_WRITE (MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT
+ (eth_port_num), 0x3fffffff);
+ MV_REG_WRITE (MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG
+ (eth_port_num), 0x03fffcff);
+ /* Turn off the port/queue bandwidth limitation */
+ MV_REG_WRITE (MV64460_ETH_MAXIMUM_TRANSMIT_UNIT (eth_port_num), 0x0);
+
+ /* Enable port Rx. */
+ MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (eth_port_num),
+ p_eth_port_ctrl->port_rx_queue_command);
+
+ /* Check if link is up */
+ eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data);
+
+ if (!(phy_reg_data & 0x20))
+ return false;
+
+ return true;
+}
+
+/*******************************************************************************
+* eth_port_uc_addr_set - This function Set the port Unicast address.
+*
+* DESCRIPTION:
+* This function Set the port Ethernet MAC address.
+*
+* INPUT:
+* ETH_PORT eth_port_num Port number.
+* char * p_addr Address to be set
+* ETH_QUEUE queue Rx queue number for this MAC address.
+*
+* OUTPUT:
+* Set MAC address low and high registers. also calls eth_port_uc_addr()
+* To set the unicast table with the proper information.
+*
+* RETURN:
+* N/A.
+*
+*******************************************************************************/
+static void eth_port_uc_addr_set (ETH_PORT eth_port_num,
+ unsigned char *p_addr, ETH_QUEUE queue)
+{
+ unsigned int mac_h;
+ unsigned int mac_l;
+
+ mac_l = (p_addr[4] << 8) | (p_addr[5]);
+ mac_h = (p_addr[0] << 24) | (p_addr[1] << 16) |
+ (p_addr[2] << 8) | (p_addr[3] << 0);
+
+ MV_REG_WRITE (MV64460_ETH_MAC_ADDR_LOW (eth_port_num), mac_l);
+ MV_REG_WRITE (MV64460_ETH_MAC_ADDR_HIGH (eth_port_num), mac_h);
+
+ /* Accept frames of this address */
+ eth_port_uc_addr (eth_port_num, p_addr[5], queue, ACCEPT_MAC_ADDR);
+
+ return;
+}
+
+/*******************************************************************************
+* eth_port_uc_addr - This function Set the port unicast address table
+*
+* DESCRIPTION:
+* This function locates the proper entry in the Unicast table for the
+* specified MAC nibble and sets its properties according to function
+* parameters.
+*
+* INPUT:
+* ETH_PORT eth_port_num Port number.
+* unsigned char uc_nibble Unicast MAC Address last nibble.
+* ETH_QUEUE queue Rx queue number for this MAC address.
+* int option 0 = Add, 1 = remove address.
+*
+* OUTPUT:
+* This function add/removes MAC addresses from the port unicast address
+* table.
+*
+* RETURN:
+* true is output succeeded.
+* false if option parameter is invalid.
+*
+*******************************************************************************/
+static bool eth_port_uc_addr (ETH_PORT eth_port_num,
+ unsigned char uc_nibble,
+ ETH_QUEUE queue, int option)
+{
+ unsigned int unicast_reg;
+ unsigned int tbl_offset;
+ unsigned int reg_offset;
+
+ /* Locate the Unicast table entry */
+ uc_nibble = (0xf & uc_nibble);
+ tbl_offset = (uc_nibble / 4) * 4; /* Register offset from unicast table base */
+ reg_offset = uc_nibble % 4; /* Entry offset within the above register */
+
+ switch (option) {
+ case REJECT_MAC_ADDR:
+ /* Clear accepts frame bit at specified unicast DA table entry */
+ unicast_reg =
+ MV_REG_READ ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
+ (eth_port_num)
+ + tbl_offset));
+
+ unicast_reg &= (0x0E << (8 * reg_offset));
+
+ MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
+ (eth_port_num)
+ + tbl_offset), unicast_reg);
+ break;
+
+ case ACCEPT_MAC_ADDR:
+ /* Set accepts frame bit at unicast DA filter table entry */
+ unicast_reg =
+ MV_REG_READ ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
+ (eth_port_num)
+ + tbl_offset));
+
+ unicast_reg |= ((0x01 | queue) << (8 * reg_offset));
+
+ MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
+ (eth_port_num)
+ + tbl_offset), unicast_reg);
+
+ break;
+
+ default:
+ return false;
+ }
+ return true;
+}
+
+#if 0 /* FIXME */
+/*******************************************************************************
+* eth_port_mc_addr - Multicast address settings.
+*
+* DESCRIPTION:
+* This API controls the MV device MAC multicast support.
+* The MV device supports multicast using two tables:
+* 1) Special Multicast Table for MAC addresses of the form
+* 0x01-00-5E-00-00-XX (where XX is between 0x00 and 0x_fF).
+* The MAC DA[7:0] bits are used as a pointer to the Special Multicast
+* Table entries in the DA-Filter table.
+* In this case, the function calls eth_port_smc_addr() routine to set the
+* Special Multicast Table.
+* 2) Other Multicast Table for multicast of another type. A CRC-8bit
+* is used as an index to the Other Multicast Table entries in the
+* DA-Filter table.
+* In this case, the function calculates the CRC-8bit value and calls
+* eth_port_omc_addr() routine to set the Other Multicast Table.
+* INPUT:
+* ETH_PORT eth_port_num Port number.
+* unsigned char *p_addr Unicast MAC Address.
+* ETH_QUEUE queue Rx queue number for this MAC address.
+* int option 0 = Add, 1 = remove address.
+*
+* OUTPUT:
+* See description.
+*
+* RETURN:
+* true is output succeeded.
+* false if add_address_table_entry( ) failed.
+*
+*******************************************************************************/
+static void eth_port_mc_addr (ETH_PORT eth_port_num,
+ unsigned char *p_addr,
+ ETH_QUEUE queue, int option)
+{
+ unsigned int mac_h;
+ unsigned int mac_l;
+ unsigned char crc_result = 0;
+ int mac_array[48];
+ int crc[8];
+ int i;
+
+ if ((p_addr[0] == 0x01) &&
+ (p_addr[1] == 0x00) &&
+ (p_addr[2] == 0x5E) && (p_addr[3] == 0x00) && (p_addr[4] == 0x00)) {
+
+ eth_port_smc_addr (eth_port_num, p_addr[5], queue, option);
+ } else {
+ /* Calculate CRC-8 out of the given address */
+ mac_h = (p_addr[0] << 8) | (p_addr[1]);
+ mac_l = (p_addr[2] << 24) | (p_addr[3] << 16) |
+ (p_addr[4] << 8) | (p_addr[5] << 0);
+
+ for (i = 0; i < 32; i++)
+ mac_array[i] = (mac_l >> i) & 0x1;
+ for (i = 32; i < 48; i++)
+ mac_array[i] = (mac_h >> (i - 32)) & 0x1;
+
+ crc[0] = mac_array[45] ^ mac_array[43] ^ mac_array[40] ^
+ mac_array[39] ^ mac_array[35] ^ mac_array[34] ^
+ mac_array[31] ^ mac_array[30] ^ mac_array[28] ^
+ mac_array[23] ^ mac_array[21] ^ mac_array[19] ^
+ mac_array[18] ^ mac_array[16] ^ mac_array[14] ^
+ mac_array[12] ^ mac_array[8] ^ mac_array[7] ^
+ mac_array[6] ^ mac_array[0];
+
+ crc[1] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^
+ mac_array[43] ^ mac_array[41] ^ mac_array[39] ^
+ mac_array[36] ^ mac_array[34] ^ mac_array[32] ^
+ mac_array[30] ^ mac_array[29] ^ mac_array[28] ^
+ mac_array[24] ^ mac_array[23] ^ mac_array[22] ^
+ mac_array[21] ^ mac_array[20] ^ mac_array[18] ^
+ mac_array[17] ^ mac_array[16] ^ mac_array[15] ^
+ mac_array[14] ^ mac_array[13] ^ mac_array[12] ^
+ mac_array[9] ^ mac_array[6] ^ mac_array[1] ^
+ mac_array[0];
+
+ crc[2] = mac_array[47] ^ mac_array[46] ^ mac_array[44] ^
+ mac_array[43] ^ mac_array[42] ^ mac_array[39] ^
+ mac_array[37] ^ mac_array[34] ^ mac_array[33] ^
+ mac_array[29] ^ mac_array[28] ^ mac_array[25] ^
+ mac_array[24] ^ mac_array[22] ^ mac_array[17] ^
+ mac_array[15] ^ mac_array[13] ^ mac_array[12] ^
+ mac_array[10] ^ mac_array[8] ^ mac_array[6] ^
+ mac_array[2] ^ mac_array[1] ^ mac_array[0];
+
+ crc[3] = mac_array[47] ^ mac_array[45] ^ mac_array[44] ^
+ mac_array[43] ^ mac_array[40] ^ mac_array[38] ^
+ mac_array[35] ^ mac_array[34] ^ mac_array[30] ^
+ mac_array[29] ^ mac_array[26] ^ mac_array[25] ^
+ mac_array[23] ^ mac_array[18] ^ mac_array[16] ^
+ mac_array[14] ^ mac_array[13] ^ mac_array[11] ^
+ mac_array[9] ^ mac_array[7] ^ mac_array[3] ^
+ mac_array[2] ^ mac_array[1];
+
+ crc[4] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^
+ mac_array[41] ^ mac_array[39] ^ mac_array[36] ^
+ mac_array[35] ^ mac_array[31] ^ mac_array[30] ^
+ mac_array[27] ^ mac_array[26] ^ mac_array[24] ^
+ mac_array[19] ^ mac_array[17] ^ mac_array[15] ^
+ mac_array[14] ^ mac_array[12] ^ mac_array[10] ^
+ mac_array[8] ^ mac_array[4] ^ mac_array[3] ^
+ mac_array[2];
+
+ crc[5] = mac_array[47] ^ mac_array[46] ^ mac_array[45] ^
+ mac_array[42] ^ mac_array[40] ^ mac_array[37] ^
+ mac_array[36] ^ mac_array[32] ^ mac_array[31] ^
+ mac_array[28] ^ mac_array[27] ^ mac_array[25] ^
+ mac_array[20] ^ mac_array[18] ^ mac_array[16] ^
+ mac_array[15] ^ mac_array[13] ^ mac_array[11] ^
+ mac_array[9] ^ mac_array[5] ^ mac_array[4] ^
+ mac_array[3];
+
+ crc[6] = mac_array[47] ^ mac_array[46] ^ mac_array[43] ^
+ mac_array[41] ^ mac_array[38] ^ mac_array[37] ^
+ mac_array[33] ^ mac_array[32] ^ mac_array[29] ^
+ mac_array[28] ^ mac_array[26] ^ mac_array[21] ^
+ mac_array[19] ^ mac_array[17] ^ mac_array[16] ^
+ mac_array[14] ^ mac_array[12] ^ mac_array[10] ^
+ mac_array[6] ^ mac_array[5] ^ mac_array[4];
+
+ crc[7] = mac_array[47] ^ mac_array[44] ^ mac_array[42] ^
+ mac_array[39] ^ mac_array[38] ^ mac_array[34] ^
+ mac_array[33] ^ mac_array[30] ^ mac_array[29] ^
+ mac_array[27] ^ mac_array[22] ^ mac_array[20] ^
+ mac_array[18] ^ mac_array[17] ^ mac_array[15] ^
+ mac_array[13] ^ mac_array[11] ^ mac_array[7] ^
+ mac_array[6] ^ mac_array[5];
+
+ for (i = 0; i < 8; i++)
+ crc_result = crc_result | (crc[i] << i);
+
+ eth_port_omc_addr (eth_port_num, crc_result, queue, option);
+ }
+ return;
+}
+
+/*******************************************************************************
+* eth_port_smc_addr - Special Multicast address settings.
+*
+* DESCRIPTION:
+* This routine controls the MV device special MAC multicast support.
+* The Special Multicast Table for MAC addresses supports MAC of the form
+* 0x01-00-5E-00-00-XX (where XX is between 0x00 and 0x_fF).
+* The MAC DA[7:0] bits are used as a pointer to the Special Multicast
+* Table entries in the DA-Filter table.
+* This function set the Special Multicast Table appropriate entry
+* according to the argument given.
+*
+* INPUT:
+* ETH_PORT eth_port_num Port number.
+* unsigned char mc_byte Multicast addr last byte (MAC DA[7:0] bits).
+* ETH_QUEUE queue Rx queue number for this MAC address.
+* int option 0 = Add, 1 = remove address.
+*
+* OUTPUT:
+* See description.
+*
+* RETURN:
+* true is output succeeded.
+* false if option parameter is invalid.
+*
+*******************************************************************************/
+static bool eth_port_smc_addr (ETH_PORT eth_port_num,
+ unsigned char mc_byte,
+ ETH_QUEUE queue, int option)
+{
+ unsigned int smc_table_reg;
+ unsigned int tbl_offset;
+ unsigned int reg_offset;
+
+ /* Locate the SMC table entry */
+ tbl_offset = (mc_byte / 4) * 4; /* Register offset from SMC table base */
+ reg_offset = mc_byte % 4; /* Entry offset within the above register */
+ queue &= 0x7;
+
+ switch (option) {
+ case REJECT_MAC_ADDR:
+ /* Clear accepts frame bit at specified Special DA table entry */
+ smc_table_reg =
+ MV_REG_READ ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
+ smc_table_reg &= (0x0E << (8 * reg_offset));
+
+ MV_REG_WRITE ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), smc_table_reg);
+ break;
+
+ case ACCEPT_MAC_ADDR:
+ /* Set accepts frame bit at specified Special DA table entry */
+ smc_table_reg =
+ MV_REG_READ ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
+ smc_table_reg |= ((0x01 | queue) << (8 * reg_offset));
+
+ MV_REG_WRITE ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), smc_table_reg);
+ break;
+
+ default:
+ return false;
+ }
+ return true;
+}
+
+/*******************************************************************************
+* eth_port_omc_addr - Multicast address settings.
+*
+* DESCRIPTION:
+* This routine controls the MV device Other MAC multicast support.
+* The Other Multicast Table is used for multicast of another type.
+* A CRC-8bit is used as an index to the Other Multicast Table entries
+* in the DA-Filter table.
+* The function gets the CRC-8bit value from the calling routine and
+* set the Other Multicast Table appropriate entry according to the
+* CRC-8 argument given.
+*
+* INPUT:
+* ETH_PORT eth_port_num Port number.
+* unsigned char crc8 A CRC-8bit (Polynomial: x^8+x^2+x^1+1).
+* ETH_QUEUE queue Rx queue number for this MAC address.
+* int option 0 = Add, 1 = remove address.
+*
+* OUTPUT:
+* See description.
+*
+* RETURN:
+* true is output succeeded.
+* false if option parameter is invalid.
+*
+*******************************************************************************/
+static bool eth_port_omc_addr (ETH_PORT eth_port_num,
+ unsigned char crc8,
+ ETH_QUEUE queue, int option)
+{
+ unsigned int omc_table_reg;
+ unsigned int tbl_offset;
+ unsigned int reg_offset;
+
+ /* Locate the OMC table entry */
+ tbl_offset = (crc8 / 4) * 4; /* Register offset from OMC table base */
+ reg_offset = crc8 % 4; /* Entry offset within the above register */
+ queue &= 0x7;
+
+ switch (option) {
+ case REJECT_MAC_ADDR:
+ /* Clear accepts frame bit at specified Other DA table entry */
+ omc_table_reg =
+ MV_REG_READ ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
+ omc_table_reg &= (0x0E << (8 * reg_offset));
+
+ MV_REG_WRITE ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), omc_table_reg);
+ break;
+
+ case ACCEPT_MAC_ADDR:
+ /* Set accepts frame bit at specified Other DA table entry */
+ omc_table_reg =
+ MV_REG_READ ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
+ omc_table_reg |= ((0x01 | queue) << (8 * reg_offset));
+
+ MV_REG_WRITE ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), omc_table_reg);
+ break;
+
+ default:
+ return false;
+ }
+ return true;
+}
+#endif
+
+/*******************************************************************************
+* eth_port_init_mac_tables - Clear all entrance in the UC, SMC and OMC tables
+*
+* DESCRIPTION:
+* Go through all the DA filter tables (Unicast, Special Multicast & Other
+* Multicast) and set each entry to 0.
+*
+* INPUT:
+* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
+*
+* OUTPUT:
+* Multicast and Unicast packets are rejected.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+static void eth_port_init_mac_tables (ETH_PORT eth_port_num)
+{
+ int table_index;
+
+ /* Clear DA filter unicast table (Ex_dFUT) */
+ for (table_index = 0; table_index <= 0xC; table_index += 4)
+ MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE
+ (eth_port_num) + table_index), 0);
+
+ for (table_index = 0; table_index <= 0xFC; table_index += 4) {
+ /* Clear DA filter special multicast table (Ex_dFSMT) */
+ MV_REG_WRITE ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0);
+ /* Clear DA filter other multicast table (Ex_dFOMT) */
+ MV_REG_WRITE ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0);
+ }
+}
+
+/*******************************************************************************
+* eth_clear_mib_counters - Clear all MIB counters
+*
+* DESCRIPTION:
+* This function clears all MIB counters of a specific ethernet port.
+* A read from the MIB counter will reset the counter.
+*
+* INPUT:
+* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
+*
+* OUTPUT:
+* After reading all MIB counters, the counters resets.
+*
+* RETURN:
+* MIB counter value.
+*
+*******************************************************************************/
+static void eth_clear_mib_counters (ETH_PORT eth_port_num)
+{
+ int i;
+ unsigned int dummy;
+
+ /* Perform dummy reads from MIB counters */
+ for (i = ETH_MIB_GOOD_OCTETS_RECEIVED_LOW; i < ETH_MIB_LATE_COLLISION;
+ i += 4)
+ dummy = MV_REG_READ ((MV64460_ETH_MIB_COUNTERS_BASE
+ (eth_port_num) + i));
+
+ return;
+}
+
+/*******************************************************************************
+* eth_read_mib_counter - Read a MIB counter
+*
+* DESCRIPTION:
+* This function reads a MIB counter of a specific ethernet port.
+* NOTE - If read from ETH_MIB_GOOD_OCTETS_RECEIVED_LOW, then the
+* following read must be from ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH
+* register. The same applies for ETH_MIB_GOOD_OCTETS_SENT_LOW and
+* ETH_MIB_GOOD_OCTETS_SENT_HIGH
+*
+* INPUT:
+* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
+* unsigned int mib_offset MIB counter offset (use ETH_MIB_... macros).
+*
+* OUTPUT:
+* After reading the MIB counter, the counter resets.
+*
+* RETURN:
+* MIB counter value.
+*
+*******************************************************************************/
+unsigned int eth_read_mib_counter (ETH_PORT eth_port_num,
+ unsigned int mib_offset)
+{
+ return (MV_REG_READ (MV64460_ETH_MIB_COUNTERS_BASE (eth_port_num)
+ + mib_offset));
+}
+
+/*******************************************************************************
+* ethernet_phy_set - Set the ethernet port PHY address.
+*
+* DESCRIPTION:
+* This routine set the ethernet port PHY address according to given
+* parameter.
+*
+* INPUT:
+* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
+*
+* OUTPUT:
+* Set PHY Address Register with given PHY address parameter.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr)
+{
+ unsigned int reg_data;
+
+ reg_data = MV_REG_READ (MV64460_ETH_PHY_ADDR_REG);
+
+ reg_data &= ~(0x1F << (5 * eth_port_num));
+ reg_data |= (phy_addr << (5 * eth_port_num));
+
+ MV_REG_WRITE (MV64460_ETH_PHY_ADDR_REG, reg_data);
+
+ return;
+}
+
+/*******************************************************************************
+ * ethernet_phy_get - Get the ethernet port PHY address.
+ *
+ * DESCRIPTION:
+ * This routine returns the given ethernet port PHY address.
+ *
+ * INPUT:
+ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
+ *
+ * OUTPUT:
+ * None.
+ *
+ * RETURN:
+ * PHY address.
+ *
+ *******************************************************************************/
+static int ethernet_phy_get (ETH_PORT eth_port_num)
+{
+ unsigned int reg_data;
+
+ reg_data = MV_REG_READ (MV64460_ETH_PHY_ADDR_REG);
+
+ return ((reg_data >> (5 * eth_port_num)) & 0x1f);
+}
+
+/***********************************************************/
+/* (Re)start autonegotiation */
+/***********************************************************/
+int phy_setup_aneg (char *devname, unsigned char addr)
+{
+ unsigned short ctl, adv;
+
+ /* Setup standard advertise */
+ miiphy_read (devname, addr, PHY_ANAR, &adv);
+ adv |= (PHY_ANLPAR_ACK | PHY_ANLPAR_RF | PHY_ANLPAR_T4 |
+ PHY_ANLPAR_TXFD | PHY_ANLPAR_TX | PHY_ANLPAR_10FD |
+ PHY_ANLPAR_10);
+ miiphy_write (devname, addr, PHY_ANAR, adv);
+
+ miiphy_read (devname, addr, PHY_1000BTCR, &adv);
+ adv |= (0x0300);
+ miiphy_write (devname, addr, PHY_1000BTCR, adv);
+
+ /* Start/Restart aneg */
+ miiphy_read (devname, addr, PHY_BMCR, &ctl);
+ ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+ miiphy_write (devname, addr, PHY_BMCR, ctl);
+
+ return 0;
+}
+
+/*******************************************************************************
+ * ethernet_phy_reset - Reset Ethernet port PHY.
+ *
+ * DESCRIPTION:
+ * This routine utilize the SMI interface to reset the ethernet port PHY.
+ * The routine waits until the link is up again or link up is timeout.
+ *
+ * INPUT:
+ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
+ *
+ * OUTPUT:
+ * The ethernet port PHY renew its link.
+ *
+ * RETURN:
+ * None.
+ *
+ *******************************************************************************/
+static bool ethernet_phy_reset (ETH_PORT eth_port_num)
+{
+ unsigned int time_out = 50;
+ unsigned int phy_reg_data;
+
+ eth_port_read_smi_reg (eth_port_num, 20, &phy_reg_data);
+ phy_reg_data |= 0x0083; /* Set bit 7 to 1 for different RGMII timing */
+ eth_port_write_smi_reg (eth_port_num, 20, phy_reg_data);
+
+ /* Reset the PHY */
+ eth_port_read_smi_reg (eth_port_num, 0, &phy_reg_data);
+ phy_reg_data |= 0x8000; /* Set bit 15 to reset the PHY */
+ eth_port_write_smi_reg (eth_port_num, 0, phy_reg_data);
+
+ /* Poll on the PHY LINK */
+ do {
+ eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data);
+
+ if (time_out-- == 0)
+ return false;
+ }
+ while (!(phy_reg_data & 0x20));
+
+ return true;
+}
+
+/*******************************************************************************
+ * eth_port_reset - Reset Ethernet port
+ *
+ * DESCRIPTION:
+ * This routine resets the chip by aborting any SDMA engine activity and
+ * clearing the MIB counters. The Receiver and the Transmit unit are in
+ * idle state after this command is performed and the port is disabled.
+ *
+ * INPUT:
+ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
+ *
+ * OUTPUT:
+ * Channel activity is halted.
+ *
+ * RETURN:
+ * None.
+ *
+ *******************************************************************************/
+static void eth_port_reset (ETH_PORT eth_port_num)
+{
+ unsigned int reg_data;
+
+ /* Stop Tx port activity. Check port Tx activity. */
+ reg_data =
+ MV_REG_READ (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG
+ (eth_port_num));
+
+ if (reg_data & 0xFF) {
+ /* Issue stop command for active channels only */
+ MV_REG_WRITE (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG
+ (eth_port_num), (reg_data << 8));
+
+ /* Wait for all Tx activity to terminate. */
+ do {
+ /* Check port cause register that all Tx queues are stopped */
+ reg_data =
+ MV_REG_READ
+ (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG
+ (eth_port_num));
+ }
+ while (reg_data & 0xFF);
+ }
+
+ /* Stop Rx port activity. Check port Rx activity. */
+ reg_data =
+ MV_REG_READ (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG
+ (eth_port_num));
+
+ if (reg_data & 0xFF) {
+ /* Issue stop command for active channels only */
+ MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG
+ (eth_port_num), (reg_data << 8));
+
+ /* Wait for all Rx activity to terminate. */
+ do {
+ /* Check port cause register that all Rx queues are stopped */
+ reg_data =
+ MV_REG_READ
+ (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG
+ (eth_port_num));
+ }
+ while (reg_data & 0xFF);
+ }
+
+ /* Clear all MIB counters */
+ eth_clear_mib_counters (eth_port_num);
+
+ /* Reset the Enable bit in the Configuration Register */
+ reg_data =
+ MV_REG_READ (MV64460_ETH_PORT_SERIAL_CONTROL_REG
+ (eth_port_num));
+ reg_data &= ~ETH_SERIAL_PORT_ENABLE;
+ MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
+ reg_data);
+
+ return;
+}
+
+#if 0 /* Not needed here */
+/*******************************************************************************
+ * ethernet_set_config_reg - Set specified bits in configuration register.
+ *
+ * DESCRIPTION:
+ * This function sets specified bits in the given ethernet
+ * configuration register.
+ *
+ * INPUT:
+ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
+ * unsigned int value 32 bit value.
+ *
+ * OUTPUT:
+ * The set bits in the value parameter are set in the configuration
+ * register.
+ *
+ * RETURN:
+ * None.
+ *
+ *******************************************************************************/
+static void ethernet_set_config_reg (ETH_PORT eth_port_num,
+ unsigned int value)
+{
+ unsigned int eth_config_reg;
+
+ eth_config_reg =
+ MV_REG_READ (MV64460_ETH_PORT_CONFIG_REG (eth_port_num));
+ eth_config_reg |= value;
+ MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_REG (eth_port_num),
+ eth_config_reg);
+
+ return;
+}
+#endif
+
+#if 0 /* FIXME */
+/*******************************************************************************
+ * ethernet_reset_config_reg - Reset specified bits in configuration register.
+ *
+ * DESCRIPTION:
+ * This function resets specified bits in the given Ethernet
+ * configuration register.
+ *
+ * INPUT:
+ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
+ * unsigned int value 32 bit value.
+ *
+ * OUTPUT:
+ * The set bits in the value parameter are reset in the configuration
+ * register.
+ *
+ * RETURN:
+ * None.
+ *
+ *******************************************************************************/
+static void ethernet_reset_config_reg (ETH_PORT eth_port_num,
+ unsigned int value)
+{
+ unsigned int eth_config_reg;
+
+ eth_config_reg = MV_REG_READ (MV64460_ETH_PORT_CONFIG_EXTEND_REG
+ (eth_port_num));
+ eth_config_reg &= ~value;
+ MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_EXTEND_REG (eth_port_num),
+ eth_config_reg);
+
+ return;
+}
+#endif
+
+#if 0 /* Not needed here */
+/*******************************************************************************
+ * ethernet_get_config_reg - Get the port configuration register
+ *
+ * DESCRIPTION:
+ * This function returns the configuration register value of the given
+ * ethernet port.
+ *
+ * INPUT:
+ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
+ *
+ * OUTPUT:
+ * None.
+ *
+ * RETURN:
+ * Port configuration register value.
+ *
+ *******************************************************************************/
+static unsigned int ethernet_get_config_reg (ETH_PORT eth_port_num)
+{
+ unsigned int eth_config_reg;
+
+ eth_config_reg = MV_REG_READ (MV64460_ETH_PORT_CONFIG_EXTEND_REG
+ (eth_port_num));
+ return eth_config_reg;
+}
+
+#endif
+
+/*******************************************************************************
+ * eth_port_read_smi_reg - Read PHY registers
+ *
+ * DESCRIPTION:
+ * This routine utilize the SMI interface to interact with the PHY in
+ * order to perform PHY register read.
+ *
+ * INPUT:
+ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
+ * unsigned int phy_reg PHY register address offset.
+ * unsigned int *value Register value buffer.
+ *
+ * OUTPUT:
+ * Write the value of a specified PHY register into given buffer.
+ *
+ * RETURN:
+ * false if the PHY is busy or read data is not in valid state.
+ * true otherwise.
+ *
+ *******************************************************************************/
+static bool eth_port_read_smi_reg (ETH_PORT eth_port_num,
+ unsigned int phy_reg, unsigned int *value)
+{
+ unsigned int reg_value;
+ unsigned int time_out = PHY_BUSY_TIMEOUT;
+ int phy_addr;
+
+ phy_addr = ethernet_phy_get (eth_port_num);
+
+ /* first check that it is not busy */
+ do {
+ reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
+ if (time_out-- == 0) {
+ return false;
+ }
+ }
+ while (reg_value & ETH_SMI_BUSY);
+
+ /* not busy */
+
+ MV_REG_WRITE (MV64460_ETH_SMI_REG,
+ (phy_addr << 16) | (phy_reg << 21) |
+ ETH_SMI_OPCODE_READ);
+
+ time_out = PHY_BUSY_TIMEOUT; /* initialize the time out var again */
+
+ do {
+ reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
+ if (time_out-- == 0) {
+ return false;
+ }
+ }
+ while ((reg_value & ETH_SMI_READ_VALID) != ETH_SMI_READ_VALID); /* Bit set equ operation done */
+
+ /* Wait for the data to update in the SMI register */
+#define PHY_UPDATE_TIMEOUT 10000
+ for (time_out = 0; time_out < PHY_UPDATE_TIMEOUT; time_out++);
+
+ reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
+
+ *value = reg_value & 0xffff;
+
+ return true;
+}
+
+int mv_miiphy_read(char *devname, unsigned char phy_addr,
+ unsigned char phy_reg, unsigned short *value)
+{
+ unsigned int reg_value;
+ unsigned int time_out = PHY_BUSY_TIMEOUT;
+
+ /* first check that it is not busy */
+ do {
+ reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
+ if (time_out-- == 0) {
+ return false;
+ }
+ }
+ while (reg_value & ETH_SMI_BUSY);
+
+ /* not busy */
+ MV_REG_WRITE (MV64460_ETH_SMI_REG,
+ (phy_addr << 16) | (phy_reg << 21) |
+ ETH_SMI_OPCODE_READ);
+
+ time_out = PHY_BUSY_TIMEOUT; /* initialize the time out var again */
+
+ do {
+ reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
+ if (time_out-- == 0) {
+ return false;
+ }
+ }
+ while ((reg_value & ETH_SMI_READ_VALID) != ETH_SMI_READ_VALID); /* Bit set equ operation done */
+
+ /* Wait for the data to update in the SMI register */
+ for (time_out = 0; time_out < PHY_UPDATE_TIMEOUT; time_out++);
+
+ reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
+
+ *value = reg_value & 0xffff;
+
+ return 0;
+}
+
+/*******************************************************************************
+ * eth_port_write_smi_reg - Write to PHY registers
+ *
+ * DESCRIPTION:
+ * This routine utilize the SMI interface to interact with the PHY in
+ * order to perform writes to PHY registers.
+ *
+ * INPUT:
+ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
+ * unsigned int phy_reg PHY register address offset.
+ * unsigned int value Register value.
+ *
+ * OUTPUT:
+ * Write the given value to the specified PHY register.
+ *
+ * RETURN:
+ * false if the PHY is busy.
+ * true otherwise.
+ *
+ *******************************************************************************/
+static bool eth_port_write_smi_reg (ETH_PORT eth_port_num,
+ unsigned int phy_reg, unsigned int value)
+{
+ unsigned int reg_value;
+ unsigned int time_out = PHY_BUSY_TIMEOUT;
+ int phy_addr;
+
+ phy_addr = ethernet_phy_get (eth_port_num);
+
+ /* first check that it is not busy */
+ do {
+ reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
+ if (time_out-- == 0) {
+ return false;
+ }
+ }
+ while (reg_value & ETH_SMI_BUSY);
+
+ /* not busy */
+ MV_REG_WRITE (MV64460_ETH_SMI_REG,
+ (phy_addr << 16) | (phy_reg << 21) |
+ ETH_SMI_OPCODE_WRITE | (value & 0xffff));
+ return true;
+}
+
+int mv_miiphy_write(char *devname, unsigned char phy_addr,
+ unsigned char phy_reg, unsigned short value)
+{
+ unsigned int reg_value;
+ unsigned int time_out = PHY_BUSY_TIMEOUT;
+
+ /* first check that it is not busy */
+ do {
+ reg_value = MV_REG_READ (MV64460_ETH_SMI_REG);
+ if (time_out-- == 0) {
+ return false;
+ }
+ }
+ while (reg_value & ETH_SMI_BUSY);
+
+ /* not busy */
+ MV_REG_WRITE (MV64460_ETH_SMI_REG,
+ (phy_addr << 16) | (phy_reg << 21) |
+ ETH_SMI_OPCODE_WRITE | (value & 0xffff));
+ return 0;
+}
+
+/*******************************************************************************
+ * eth_set_access_control - Config address decode parameters for Ethernet unit
+ *
+ * DESCRIPTION:
+ * This function configures the address decode parameters for the Gigabit
+ * Ethernet Controller according the given parameters struct.
+ *
+ * INPUT:
+ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
+ * ETH_WIN_PARAM *param Address decode parameter struct.
+ *
+ * OUTPUT:
+ * An access window is opened using the given access parameters.
+ *
+ * RETURN:
+ * None.
+ *
+ *******************************************************************************/
+static void eth_set_access_control (ETH_PORT eth_port_num,
+ ETH_WIN_PARAM * param)
+{
+ unsigned int access_prot_reg;
+
+ /* Set access control register */
+ access_prot_reg = MV_REG_READ (MV64460_ETH_ACCESS_PROTECTION_REG
+ (eth_port_num));
+ access_prot_reg &= (~(3 << (param->win * 2))); /* clear window permission */
+ access_prot_reg |= (param->access_ctrl << (param->win * 2));
+ MV_REG_WRITE (MV64460_ETH_ACCESS_PROTECTION_REG (eth_port_num),
+ access_prot_reg);
+
+ /* Set window Size reg (SR) */
+ MV_REG_WRITE ((MV64460_ETH_SIZE_REG_0 +
+ (ETH_SIZE_REG_GAP * param->win)),
+ (((param->size / 0x10000) - 1) << 16));
+
+ /* Set window Base address reg (BA) */
+ MV_REG_WRITE ((MV64460_ETH_BAR_0 + (ETH_BAR_GAP * param->win)),
+ (param->target | param->attributes | param->base_addr));
+ /* High address remap reg (HARR) */
+ if (param->win < 4)
+ MV_REG_WRITE ((MV64460_ETH_HIGH_ADDR_REMAP_REG_0 +
+ (ETH_HIGH_ADDR_REMAP_REG_GAP * param->win)),
+ param->high_addr);
+
+ /* Base address enable reg (BARER) */
+ if (param->enable == 1)
+ MV_RESET_REG_BITS (MV64460_ETH_BASE_ADDR_ENABLE_REG,
+ (1 << param->win));
+ else
+ MV_SET_REG_BITS (MV64460_ETH_BASE_ADDR_ENABLE_REG,
+ (1 << param->win));
+}
+
+/*******************************************************************************
+ * ether_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory.
+ *
+ * DESCRIPTION:
+ * This function prepares a Rx chained list of descriptors and packet
+ * buffers in a form of a ring. The routine must be called after port
+ * initialization routine and before port start routine.
+ * The Ethernet SDMA engine uses CPU bus addresses to access the various
+ * devices in the system (i.e. DRAM). This function uses the ethernet
+ * struct 'virtual to physical' routine (set by the user) to set the ring
+ * with physical addresses.
+ *
+ * INPUT:
+ * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
+ * ETH_QUEUE rx_queue Number of Rx queue.
+ * int rx_desc_num Number of Rx descriptors
+ * int rx_buff_size Size of Rx buffer
+ * unsigned int rx_desc_base_addr Rx descriptors memory area base addr.
+ * unsigned int rx_buff_base_addr Rx buffer memory area base addr.
+ *
+ * OUTPUT:
+ * The routine updates the Ethernet port control struct with information
+ * regarding the Rx descriptors and buffers.
+ *
+ * RETURN:
+ * false if the given descriptors memory area is not aligned according to
+ * Ethernet SDMA specifications.
+ * true otherwise.
+ *
+ *******************************************************************************/
+static bool ether_init_rx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
+ ETH_QUEUE rx_queue,
+ int rx_desc_num,
+ int rx_buff_size,
+ unsigned int rx_desc_base_addr,
+ unsigned int rx_buff_base_addr)
+{
+ ETH_RX_DESC *p_rx_desc;
+ ETH_RX_DESC *p_rx_prev_desc; /* pointer to link with the last descriptor */
+ unsigned int buffer_addr;
+ int ix; /* a counter */
+
+ p_rx_desc = (ETH_RX_DESC *) rx_desc_base_addr;
+ p_rx_prev_desc = p_rx_desc;
+ buffer_addr = rx_buff_base_addr;
+
+ /* Rx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */
+ if (rx_buff_base_addr & 0xF)
+ return false;
+
+ /* Rx buffers are limited to 64K bytes and Minimum size is 8 bytes */
+ if ((rx_buff_size < 8) || (rx_buff_size > RX_BUFFER_MAX_SIZE))
+ return false;
+
+ /* Rx buffers must be 64-bit aligned. */
+ if ((rx_buff_base_addr + rx_buff_size) & 0x7)
+ return false;
+
+ /* initialize the Rx descriptors ring */
+ for (ix = 0; ix < rx_desc_num; ix++) {
+ p_rx_desc->buf_size = rx_buff_size;
+ p_rx_desc->byte_cnt = 0x0000;
+ p_rx_desc->cmd_sts =
+ ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT;
+ p_rx_desc->next_desc_ptr =
+ ((unsigned int) p_rx_desc) + RX_DESC_ALIGNED_SIZE;
+ p_rx_desc->buf_ptr = buffer_addr;
+ p_rx_desc->return_info = 0x00000000;
+ D_CACHE_FLUSH_LINE (p_rx_desc, 0);
+ buffer_addr += rx_buff_size;
+ p_rx_prev_desc = p_rx_desc;
+ p_rx_desc = (ETH_RX_DESC *)
+ ((unsigned int) p_rx_desc + RX_DESC_ALIGNED_SIZE);
+ }
+
+ /* Closing Rx descriptors ring */
+ p_rx_prev_desc->next_desc_ptr = (rx_desc_base_addr);
+ D_CACHE_FLUSH_LINE (p_rx_prev_desc, 0);
+
+ /* Save Rx desc pointer to driver struct. */
+ CURR_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue);
+ USED_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue);
+
+ p_eth_port_ctrl->p_rx_desc_area_base[rx_queue] =
+ (ETH_RX_DESC *) rx_desc_base_addr;
+ p_eth_port_ctrl->rx_desc_area_size[rx_queue] =
+ rx_desc_num * RX_DESC_ALIGNED_SIZE;
+
+ p_eth_port_ctrl->port_rx_queue_command |= (1 << rx_queue);
+
+ return true;
+}
+
+/*******************************************************************************
+ * ether_init_tx_desc_ring - Curve a Tx chain desc list and buffer in memory.
+ *
+ * DESCRIPTION:
+ * This function prepares a Tx chained list of descriptors and packet
+ * buffers in a form of a ring. The routine must be called after port
+ * initialization routine and before port start routine.
+ * The Ethernet SDMA engine uses CPU bus addresses to access the various
+ * devices in the system (i.e. DRAM). This function uses the ethernet
+ * struct 'virtual to physical' routine (set by the user) to set the ring
+ * with physical addresses.
+ *
+ * INPUT:
+ * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
+ * ETH_QUEUE tx_queue Number of Tx queue.
+ * int tx_desc_num Number of Tx descriptors
+ * int tx_buff_size Size of Tx buffer
+ * unsigned int tx_desc_base_addr Tx descriptors memory area base addr.
+ * unsigned int tx_buff_base_addr Tx buffer memory area base addr.
+ *
+ * OUTPUT:
+ * The routine updates the Ethernet port control struct with information
+ * regarding the Tx descriptors and buffers.
+ *
+ * RETURN:
+ * false if the given descriptors memory area is not aligned according to
+ * Ethernet SDMA specifications.
+ * true otherwise.
+ *
+ *******************************************************************************/
+static bool ether_init_tx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
+ ETH_QUEUE tx_queue,
+ int tx_desc_num,
+ int tx_buff_size,
+ unsigned int tx_desc_base_addr,
+ unsigned int tx_buff_base_addr)
+{
+
+ ETH_TX_DESC *p_tx_desc;
+ ETH_TX_DESC *p_tx_prev_desc;
+ unsigned int buffer_addr;
+ int ix; /* a counter */
+
+ /* save the first desc pointer to link with the last descriptor */
+ p_tx_desc = (ETH_TX_DESC *) tx_desc_base_addr;
+ p_tx_prev_desc = p_tx_desc;
+ buffer_addr = tx_buff_base_addr;
+
+ /* Tx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */
+ if (tx_buff_base_addr & 0xF)
+ return false;
+
+ /* Tx buffers are limited to 64K bytes and Minimum size is 8 bytes */
+ if ((tx_buff_size > TX_BUFFER_MAX_SIZE)
+ || (tx_buff_size < TX_BUFFER_MIN_SIZE))
+ return false;
+
+ /* Initialize the Tx descriptors ring */
+ for (ix = 0; ix < tx_desc_num; ix++) {
+ p_tx_desc->byte_cnt = 0x0000;
+ p_tx_desc->l4i_chk = 0x0000;
+ p_tx_desc->cmd_sts = 0x00000000;
+ p_tx_desc->next_desc_ptr =
+ ((unsigned int) p_tx_desc) + TX_DESC_ALIGNED_SIZE;
+
+ p_tx_desc->buf_ptr = buffer_addr;
+ p_tx_desc->return_info = 0x00000000;
+ D_CACHE_FLUSH_LINE (p_tx_desc, 0);
+ buffer_addr += tx_buff_size;
+ p_tx_prev_desc = p_tx_desc;
+ p_tx_desc = (ETH_TX_DESC *)
+ ((unsigned int) p_tx_desc + TX_DESC_ALIGNED_SIZE);
+
+ }
+ /* Closing Tx descriptors ring */
+ p_tx_prev_desc->next_desc_ptr = tx_desc_base_addr;
+ D_CACHE_FLUSH_LINE (p_tx_prev_desc, 0);
+ /* Set Tx desc pointer in driver struct. */
+ CURR_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue);
+ USED_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue);
+
+ /* Init Tx ring base and size parameters */
+ p_eth_port_ctrl->p_tx_desc_area_base[tx_queue] =
+ (ETH_TX_DESC *) tx_desc_base_addr;
+ p_eth_port_ctrl->tx_desc_area_size[tx_queue] =
+ (tx_desc_num * TX_DESC_ALIGNED_SIZE);
+
+ /* Add the queue to the list of Tx queues of this port */
+ p_eth_port_ctrl->port_tx_queue_command |= (1 << tx_queue);
+
+ return true;
+}
+
+/*******************************************************************************
+ * eth_port_send - Send an Ethernet packet
+ *
+ * DESCRIPTION:
+ * This routine send a given packet described by p_pktinfo parameter. It
+ * supports transmitting of a packet spaned over multiple buffers. The
+ * routine updates 'curr' and 'first' indexes according to the packet
+ * segment passed to the routine. In case the packet segment is first,
+ * the 'first' index is update. In any case, the 'curr' index is updated.
+ * If the routine get into Tx resource error it assigns 'curr' index as
+ * 'first'. This way the function can abort Tx process of multiple
+ * descriptors per packet.
+ *
+ * INPUT:
+ * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
+ * ETH_QUEUE tx_queue Number of Tx queue.
+ * PKT_INFO *p_pkt_info User packet buffer.
+ *
+ * OUTPUT:
+ * Tx ring 'curr' and 'first' indexes are updated.
+ *
+ * RETURN:
+ * ETH_QUEUE_FULL in case of Tx resource error.
+ * ETH_ERROR in case the routine can not access Tx desc ring.
+ * ETH_QUEUE_LAST_RESOURCE if the routine uses the last Tx resource.
+ * ETH_OK otherwise.
+ *
+ *******************************************************************************/
+static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO * p_eth_port_ctrl,
+ ETH_QUEUE tx_queue,
+ PKT_INFO * p_pkt_info)
+{
+ volatile ETH_TX_DESC *p_tx_desc_first;
+ volatile ETH_TX_DESC *p_tx_desc_curr;
+ volatile ETH_TX_DESC *p_tx_next_desc_curr;
+ volatile ETH_TX_DESC *p_tx_desc_used;
+ unsigned int command_status;
+
+ /* Do not process Tx ring in case of Tx ring resource error */
+ if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true)
+ return ETH_QUEUE_FULL;
+
+ /* Get the Tx Desc ring indexes */
+ CURR_TFD_GET (p_tx_desc_curr, tx_queue);
+ USED_TFD_GET (p_tx_desc_used, tx_queue);
+
+ if (p_tx_desc_curr == NULL)
+ return ETH_ERROR;
+
+ /* The following parameters are used to save readings from memory */
+ p_tx_next_desc_curr = TX_NEXT_DESC_PTR (p_tx_desc_curr, tx_queue);
+ command_status = p_pkt_info->cmd_sts | ETH_ZERO_PADDING | ETH_GEN_CRC;
+
+ if (command_status & (ETH_TX_FIRST_DESC)) {
+ /* Update first desc */
+ FIRST_TFD_SET (p_tx_desc_curr, tx_queue);
+ p_tx_desc_first = p_tx_desc_curr;
+ } else {
+ FIRST_TFD_GET (p_tx_desc_first, tx_queue);
+ command_status |= ETH_BUFFER_OWNED_BY_DMA;
+ }
+
+ /* Buffers with a payload smaller than 8 bytes must be aligned to 64-bit */
+ /* boundary. We use the memory allocated for Tx descriptor. This memory */
+ /* located in TX_BUF_OFFSET_IN_DESC offset within the Tx descriptor. */
+ if (p_pkt_info->byte_cnt <= 8) {
+ printf ("You have failed in the < 8 bytes errata - fixme\n"); /* RABEEH - TBD */
+ return ETH_ERROR;
+
+ p_tx_desc_curr->buf_ptr =
+ (unsigned int) p_tx_desc_curr + TX_BUF_OFFSET_IN_DESC;
+ eth_b_copy (p_pkt_info->buf_ptr, p_tx_desc_curr->buf_ptr,
+ p_pkt_info->byte_cnt);
+ } else
+ p_tx_desc_curr->buf_ptr = p_pkt_info->buf_ptr;
+
+ p_tx_desc_curr->byte_cnt = p_pkt_info->byte_cnt;
+ p_tx_desc_curr->return_info = p_pkt_info->return_info;
+
+ if (p_pkt_info->cmd_sts & (ETH_TX_LAST_DESC)) {
+ /* Set last desc with DMA ownership and interrupt enable. */
+ p_tx_desc_curr->cmd_sts = command_status |
+ ETH_BUFFER_OWNED_BY_DMA | ETH_TX_ENABLE_INTERRUPT;
+
+ if (p_tx_desc_curr != p_tx_desc_first)
+ p_tx_desc_first->cmd_sts |= ETH_BUFFER_OWNED_BY_DMA;
+
+ /* Flush CPU pipe */
+
+ D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0);
+ D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_first, 0);
+ CPU_PIPE_FLUSH;
+
+ /* Apply send command */
+ ETH_ENABLE_TX_QUEUE (tx_queue, p_eth_port_ctrl->port_num);
+
+ /* Finish Tx packet. Update first desc in case of Tx resource error */
+ p_tx_desc_first = p_tx_next_desc_curr;
+ FIRST_TFD_SET (p_tx_desc_first, tx_queue);
+
+ } else {
+ p_tx_desc_curr->cmd_sts = command_status;
+ D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0);
+ }
+
+ /* Check for ring index overlap in the Tx desc ring */
+ if (p_tx_next_desc_curr == p_tx_desc_used) {
+ /* Update the current descriptor */
+ CURR_TFD_SET (p_tx_desc_first, tx_queue);
+
+ p_eth_port_ctrl->tx_resource_err[tx_queue] = true;
+ return ETH_QUEUE_LAST_RESOURCE;
+ } else {
+ /* Update the current descriptor */
+ CURR_TFD_SET (p_tx_next_desc_curr, tx_queue);
+ return ETH_OK;
+ }
+}
+
+/*******************************************************************************
+ * eth_tx_return_desc - Free all used Tx descriptors
+ *
+ * DESCRIPTION:
+ * This routine returns the transmitted packet information to the caller.
+ * It uses the 'first' index to support Tx desc return in case a transmit
+ * of a packet spanned over multiple buffer still in process.
+ * In case the Tx queue was in "resource error" condition, where there are
+ * no available Tx resources, the function resets the resource error flag.
+ *
+ * INPUT:
+ * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
+ * ETH_QUEUE tx_queue Number of Tx queue.
+ * PKT_INFO *p_pkt_info User packet buffer.
+ *
+ * OUTPUT:
+ * Tx ring 'first' and 'used' indexes are updated.
+ *
+ * RETURN:
+ * ETH_ERROR in case the routine can not access Tx desc ring.
+ * ETH_RETRY in case there is transmission in process.
+ * ETH_END_OF_JOB if the routine has nothing to release.
+ * ETH_OK otherwise.
+ *
+ *******************************************************************************/
+static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO *
+ p_eth_port_ctrl,
+ ETH_QUEUE tx_queue,
+ PKT_INFO * p_pkt_info)
+{
+ volatile ETH_TX_DESC *p_tx_desc_used = NULL;
+ volatile ETH_TX_DESC *p_tx_desc_first = NULL;
+ unsigned int command_status;
+
+ /* Get the Tx Desc ring indexes */
+ USED_TFD_GET (p_tx_desc_used, tx_queue);
+ FIRST_TFD_GET (p_tx_desc_first, tx_queue);
+
+ /* Sanity check */
+ if (p_tx_desc_used == NULL)
+ return ETH_ERROR;
+
+ command_status = p_tx_desc_used->cmd_sts;
+
+ /* Still transmitting... */
+ if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
+ D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
+ return ETH_RETRY;
+ }
+
+ /* Stop release. About to overlap the current available Tx descriptor */
+ if ((p_tx_desc_used == p_tx_desc_first) &&
+ (p_eth_port_ctrl->tx_resource_err[tx_queue] == false)) {
+ D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
+ return ETH_END_OF_JOB;
+ }
+
+ /* Pass the packet information to the caller */
+ p_pkt_info->cmd_sts = command_status;
+ p_pkt_info->return_info = p_tx_desc_used->return_info;
+ p_tx_desc_used->return_info = 0;
+
+ /* Update the next descriptor to release. */
+ USED_TFD_SET (TX_NEXT_DESC_PTR (p_tx_desc_used, tx_queue), tx_queue);
+
+ /* Any Tx return cancels the Tx resource error status */
+ if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true)
+ p_eth_port_ctrl->tx_resource_err[tx_queue] = false;
+
+ D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
+
+ return ETH_OK;
+
+}
+
+/*******************************************************************************
+ * eth_port_receive - Get received information from Rx ring.
+ *
+ * DESCRIPTION:
+ * This routine returns the received data to the caller. There is no
+ * data copying during routine operation. All information is returned
+ * using pointer to packet information struct passed from the caller.
+ * If the routine exhausts Rx ring resources then the resource error flag
+ * is set.
+ *
+ * INPUT:
+ * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
+ * ETH_QUEUE rx_queue Number of Rx queue.
+ * PKT_INFO *p_pkt_info User packet buffer.
+ *
+ * OUTPUT:
+ * Rx ring current and used indexes are updated.
+ *
+ * RETURN:
+ * ETH_ERROR in case the routine can not access Rx desc ring.
+ * ETH_QUEUE_FULL if Rx ring resources are exhausted.
+ * ETH_END_OF_JOB if there is no received data.
+ * ETH_OK otherwise.
+ *
+ *******************************************************************************/
+static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl,
+ ETH_QUEUE rx_queue,
+ PKT_INFO * p_pkt_info)
+{
+ volatile ETH_RX_DESC *p_rx_curr_desc;
+ volatile ETH_RX_DESC *p_rx_next_curr_desc;
+ volatile ETH_RX_DESC *p_rx_used_desc;
+ unsigned int command_status;
+
+ /* Do not process Rx ring in case of Rx ring resource error */
+ if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true) {
+ printf ("\nRx Queue is full ...\n");
+ return ETH_QUEUE_FULL;
+ }
+
+ /* Get the Rx Desc ring 'curr and 'used' indexes */
+ CURR_RFD_GET (p_rx_curr_desc, rx_queue);
+ USED_RFD_GET (p_rx_used_desc, rx_queue);
+
+ /* Sanity check */
+ if (p_rx_curr_desc == NULL)
+ return ETH_ERROR;
+
+ /* The following parameters are used to save readings from memory */
+ p_rx_next_curr_desc = RX_NEXT_DESC_PTR (p_rx_curr_desc, rx_queue);
+ command_status = p_rx_curr_desc->cmd_sts;
+
+ /* Nothing to receive... */
+ if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
+/* DP(printf("Rx: command_status: %08x\n", command_status)); */
+ D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
+/* DP(printf("\nETH_END_OF_JOB ...\n"));*/
+ return ETH_END_OF_JOB;
+ }
+
+ p_pkt_info->byte_cnt = (p_rx_curr_desc->byte_cnt) - RX_BUF_OFFSET;
+ p_pkt_info->cmd_sts = command_status;
+ p_pkt_info->buf_ptr = (p_rx_curr_desc->buf_ptr) + RX_BUF_OFFSET;
+ p_pkt_info->return_info = p_rx_curr_desc->return_info;
+ p_pkt_info->l4i_chk = p_rx_curr_desc->buf_size; /* IP fragment indicator */
+
+ /* Clean the return info field to indicate that the packet has been */
+ /* moved to the upper layers */
+ p_rx_curr_desc->return_info = 0;
+
+ /* Update 'curr' in data structure */
+ CURR_RFD_SET (p_rx_next_curr_desc, rx_queue);
+
+ /* Rx descriptors resource exhausted. Set the Rx ring resource error flag */
+ if (p_rx_next_curr_desc == p_rx_used_desc)
+ p_eth_port_ctrl->rx_resource_err[rx_queue] = true;
+
+ D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
+ CPU_PIPE_FLUSH;
+
+ return ETH_OK;
+}
+
+/*******************************************************************************
+ * eth_rx_return_buff - Returns a Rx buffer back to the Rx ring.
+ *
+ * DESCRIPTION:
+ * This routine returns a Rx buffer back to the Rx ring. It retrieves the
+ * next 'used' descriptor and attached the returned buffer to it.
+ * In case the Rx ring was in "resource error" condition, where there are
+ * no available Rx resources, the function resets the resource error flag.
+ *
+ * INPUT:
+ * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
+ * ETH_QUEUE rx_queue Number of Rx queue.
+ * PKT_INFO *p_pkt_info Information on the returned buffer.
+ *
+ * OUTPUT:
+ * New available Rx resource in Rx descriptor ring.
+ *
+ * RETURN:
+ * ETH_ERROR in case the routine can not access Rx desc ring.
+ * ETH_OK otherwise.
+ *
+ *******************************************************************************/
+static ETH_FUNC_RET_STATUS eth_rx_return_buff (ETH_PORT_INFO *
+ p_eth_port_ctrl,
+ ETH_QUEUE rx_queue,
+ PKT_INFO * p_pkt_info)
+{
+ volatile ETH_RX_DESC *p_used_rx_desc; /* Where to return Rx resource */
+
+ /* Get 'used' Rx descriptor */
+ USED_RFD_GET (p_used_rx_desc, rx_queue);
+
+ /* Sanity check */
+ if (p_used_rx_desc == NULL)
+ return ETH_ERROR;
+
+ p_used_rx_desc->buf_ptr = p_pkt_info->buf_ptr;
+ p_used_rx_desc->return_info = p_pkt_info->return_info;
+ p_used_rx_desc->byte_cnt = p_pkt_info->byte_cnt;
+ p_used_rx_desc->buf_size = MV64460_RX_BUFFER_SIZE; /* Reset Buffer size */
+
+ /* Flush the write pipe */
+ CPU_PIPE_FLUSH;
+
+ /* Return the descriptor to DMA ownership */
+ p_used_rx_desc->cmd_sts =
+ ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT;
+
+ /* Flush descriptor and CPU pipe */
+ D_CACHE_FLUSH_LINE ((unsigned int) p_used_rx_desc, 0);
+ CPU_PIPE_FLUSH;
+
+ /* Move the used descriptor pointer to the next descriptor */
+ USED_RFD_SET (RX_NEXT_DESC_PTR (p_used_rx_desc, rx_queue), rx_queue);
+
+ /* Any Rx return cancels the Rx resource error status */
+ if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true)
+ p_eth_port_ctrl->rx_resource_err[rx_queue] = false;
+
+ return ETH_OK;
+}
+
+/*******************************************************************************
+ * eth_port_set_rx_coal - Sets coalescing interrupt mechanism on RX path
+ *
+ * DESCRIPTION:
+ * This routine sets the RX coalescing interrupt mechanism parameter.
+ * This parameter is a timeout counter, that counts in 64 t_clk
+ * chunks ; that when timeout event occurs a maskable interrupt
+ * occurs.
+ * The parameter is calculated using the tClk of the MV-643xx chip
+ * , and the required delay of the interrupt in usec.
+ *
+ * INPUT:
+ * ETH_PORT eth_port_num Ethernet port number
+ * unsigned int t_clk t_clk of the MV-643xx chip in HZ units
+ * unsigned int delay Delay in usec
+ *
+ * OUTPUT:
+ * Interrupt coalescing mechanism value is set in MV-643xx chip.
+ *
+ * RETURN:
+ * The interrupt coalescing value set in the gigE port.
+ *
+ *******************************************************************************/
+#if 0 /* FIXME */
+static unsigned int eth_port_set_rx_coal (ETH_PORT eth_port_num,
+ unsigned int t_clk,
+ unsigned int delay)
+{
+ unsigned int coal;
+
+ coal = ((t_clk / 1000000) * delay) / 64;
+ /* Set RX Coalescing mechanism */
+ MV_REG_WRITE (MV64460_ETH_SDMA_CONFIG_REG (eth_port_num),
+ ((coal & 0x3fff) << 8) |
+ (MV_REG_READ
+ (MV64460_ETH_SDMA_CONFIG_REG (eth_port_num))
+ & 0xffc000ff));
+ return coal;
+}
+
+#endif
+/*******************************************************************************
+ * eth_port_set_tx_coal - Sets coalescing interrupt mechanism on TX path
+ *
+ * DESCRIPTION:
+ * This routine sets the TX coalescing interrupt mechanism parameter.
+ * This parameter is a timeout counter, that counts in 64 t_clk
+ * chunks ; that when timeout event occurs a maskable interrupt
+ * occurs.
+ * The parameter is calculated using the t_cLK frequency of the
+ * MV-643xx chip and the required delay in the interrupt in uSec
+ *
+ * INPUT:
+ * ETH_PORT eth_port_num Ethernet port number
+ * unsigned int t_clk t_clk of the MV-643xx chip in HZ units
+ * unsigned int delay Delay in uSeconds
+ *
+ * OUTPUT:
+ * Interrupt coalescing mechanism value is set in MV-643xx chip.
+ *
+ * RETURN:
+ * The interrupt coalescing value set in the gigE port.
+ *
+ *******************************************************************************/
+#if 0 /* FIXME */
+static unsigned int eth_port_set_tx_coal (ETH_PORT eth_port_num,
+ unsigned int t_clk,
+ unsigned int delay)
+{
+ unsigned int coal;
+
+ coal = ((t_clk / 1000000) * delay) / 64;
+ /* Set TX Coalescing mechanism */
+ MV_REG_WRITE (MV64460_ETH_TX_FIFO_URGENT_THRESHOLD_REG (eth_port_num),
+ coal << 4);
+ return coal;
+}
+#endif
+
+/*******************************************************************************
+ * eth_b_copy - Copy bytes from source to destination
+ *
+ * DESCRIPTION:
+ * This function supports the eight bytes limitation on Tx buffer size.
+ * The routine will zero eight bytes starting from the destination address
+ * followed by copying bytes from the source address to the destination.
+ *
+ * INPUT:
+ * unsigned int src_addr 32 bit source address.
+ * unsigned int dst_addr 32 bit destination address.
+ * int byte_count Number of bytes to copy.
+ *
+ * OUTPUT:
+ * See description.
+ *
+ * RETURN:
+ * None.
+ *
+ *******************************************************************************/
+static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr,
+ int byte_count)
+{
+ /* Zero the dst_addr area */
+ *(unsigned int *) dst_addr = 0x0;
+
+ while (byte_count != 0) {
+ *(char *) dst_addr = *(char *) src_addr;
+ dst_addr++;
+ src_addr++;
+ byte_count--;
+ }
+}
diff --git a/board/prodrive/p3mx/mv_eth.h b/board/prodrive/p3mx/mv_eth.h
new file mode 100644
index 0000000..334b049
--- /dev/null
+++ b/board/prodrive/p3mx/mv_eth.h
@@ -0,0 +1,840 @@
+/*
+ * (C) Copyright 2003
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ * based on - Driver for MV64460X ethernet ports
+ * Copyright (C) 2002 rabeeh@galileo.co.il
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * mv_eth.h - header file for the polled mode GT ethernet driver
+ */
+
+#ifndef __DB64460_ETH_H__
+#define __DB64460_ETH_H__
+
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <common.h>
+#include <net.h>
+#include "mv_regs.h"
+#include "ppc_error_no.h"
+#include "../../Marvell/include/core.h"
+
+/*************************************************************************
+**************************************************************************
+**************************************************************************
+* The first part is the high level driver of the gigE ethernet ports. *
+**************************************************************************
+**************************************************************************
+*************************************************************************/
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+/* In case not using SG on Tx, define MAX_SKB_FRAGS as 0 */
+#ifndef MAX_SKB_FRAGS
+#define MAX_SKB_FRAGS 0
+#endif
+
+/* Port attributes */
+/*#define MAX_RX_QUEUE_NUM 8*/
+/*#define MAX_TX_QUEUE_NUM 8*/
+#define MAX_RX_QUEUE_NUM 1
+#define MAX_TX_QUEUE_NUM 1
+
+
+/* Use one TX queue and one RX queue */
+#define MV64460_TX_QUEUE_NUM 1
+#define MV64460_RX_QUEUE_NUM 1
+
+/*
+ * Number of RX / TX descriptors on RX / TX rings.
+ * Note that allocating RX descriptors is done by allocating the RX
+ * ring AND a preallocated RX buffers (skb's) for each descriptor.
+ * The TX descriptors only allocates the TX descriptors ring,
+ * with no pre allocated TX buffers (skb's are allocated by higher layers.
+ */
+
+/* Default TX ring size is 10 descriptors */
+#ifdef CONFIG_MV64460_ETH_TXQUEUE_SIZE
+#define MV64460_TX_QUEUE_SIZE CONFIG_MV64460_ETH_TXQUEUE_SIZE
+#else
+#define MV64460_TX_QUEUE_SIZE 4
+#endif
+
+/* Default RX ring size is 4 descriptors */
+#ifdef CONFIG_MV64460_ETH_RXQUEUE_SIZE
+#define MV64460_RX_QUEUE_SIZE CONFIG_MV64460_ETH_RXQUEUE_SIZE
+#else
+#define MV64460_RX_QUEUE_SIZE 4
+#endif
+
+#ifdef CONFIG_RX_BUFFER_SIZE
+#define MV64460_RX_BUFFER_SIZE CONFIG_RX_BUFFER_SIZE
+#else
+#define MV64460_RX_BUFFER_SIZE 1600
+#endif
+
+#ifdef CONFIG_TX_BUFFER_SIZE
+#define MV64460_TX_BUFFER_SIZE CONFIG_TX_BUFFER_SIZE
+#else
+#define MV64460_TX_BUFFER_SIZE 1600
+#endif
+
+/*
+ * Network device statistics. Akin to the 2.0 ether stats but
+ * with byte counters.
+ */
+
+struct net_device_stats
+{
+ unsigned long rx_packets; /* total packets received */
+ unsigned long tx_packets; /* total packets transmitted */
+ unsigned long rx_bytes; /* total bytes received */
+ unsigned long tx_bytes; /* total bytes transmitted */
+ unsigned long rx_errors; /* bad packets received */
+ unsigned long tx_errors; /* packet transmit problems */
+ unsigned long rx_dropped; /* no space in linux buffers */
+ unsigned long tx_dropped; /* no space available in linux */
+ unsigned long multicast; /* multicast packets received */
+ unsigned long collisions;
+
+ /* detailed rx_errors: */
+ unsigned long rx_length_errors;
+ unsigned long rx_over_errors; /* receiver ring buff overflow */
+ unsigned long rx_crc_errors; /* recved pkt with crc error */
+ unsigned long rx_frame_errors; /* recv'd frame alignment error */
+ unsigned long rx_fifo_errors; /* recv'r fifo overrun */
+ unsigned long rx_missed_errors; /* receiver missed packet */
+
+ /* detailed tx_errors */
+ unsigned long tx_aborted_errors;
+ unsigned long tx_carrier_errors;
+ unsigned long tx_fifo_errors;
+ unsigned long tx_heartbeat_errors;
+ unsigned long tx_window_errors;
+
+ /* for cslip etc */
+ unsigned long rx_compressed;
+ unsigned long tx_compressed;
+};
+
+
+/* Private data structure used for ethernet device */
+struct mv64460_eth_priv {
+ unsigned int port_num;
+ struct net_device_stats *stats;
+
+ /* to buffer area aligned */
+ char * p_eth_tx_buffer[MV64460_TX_QUEUE_SIZE+1]; /*pointers to alligned tx buffs in memory space */
+ char * p_eth_rx_buffer[MV64460_RX_QUEUE_SIZE+1]; /*pointers to allinged rx buffs in memory space */
+
+ /* Size of Tx Ring per queue */
+ unsigned int tx_ring_size [MAX_TX_QUEUE_NUM];
+
+ /* Size of Rx Ring per queue */
+ unsigned int rx_ring_size [MAX_RX_QUEUE_NUM];
+
+ /* Magic Number for Ethernet running */
+ unsigned int eth_running;
+
+ int first_init;
+};
+
+int mv64460_eth_init (struct eth_device *dev);
+int mv64460_eth_stop (struct eth_device *dev);
+int mv64460_eth_start_xmit (struct eth_device*, volatile void* packet, int length);
+/* return db64460_eth0_poll(); */
+
+int mv64460_eth_open (struct eth_device *dev);
+
+
+/*************************************************************************
+**************************************************************************
+**************************************************************************
+* The second part is the low level driver of the gigE ethernet ports. *
+**************************************************************************
+**************************************************************************
+*************************************************************************/
+
+
+/********************************************************************************
+ * Header File for : MV-643xx network interface header
+ *
+ * DESCRIPTION:
+ * This header file contains macros typedefs and function declaration for
+ * the Marvell Gig Bit Ethernet Controller.
+ *
+ * DEPENDENCIES:
+ * None.
+ *
+ *******************************************************************************/
+
+
+#ifdef CONFIG_SPECIAL_CONSISTENT_MEMORY
+#ifdef CONFIG_MV64460_SRAM_CACHEABLE
+/* In case SRAM is cacheable but not cache coherent */
+#define D_CACHE_FLUSH_LINE(addr, offset) \
+{ \
+ __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \
+}
+#else
+/* In case SRAM is cache coherent or non-cacheable */
+#define D_CACHE_FLUSH_LINE(addr, offset) ;
+#endif
+#else
+#ifdef CONFIG_NOT_COHERENT_CACHE
+/* In case of descriptors on DDR but not cache coherent */
+#define D_CACHE_FLUSH_LINE(addr, offset) \
+{ \
+ __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \
+}
+#else
+/* In case of descriptors on DDR and cache coherent */
+#define D_CACHE_FLUSH_LINE(addr, offset) ;
+#endif /* CONFIG_NOT_COHERENT_CACHE */
+#endif /* CONFIG_SPECIAL_CONSISTENT_MEMORY */
+
+
+#define CPU_PIPE_FLUSH \
+{ \
+ __asm__ __volatile__ ("eieio"); \
+}
+
+
+/* defines */
+
+/* Default port configuration value */
+#define PORT_CONFIG_VALUE \
+ ETH_UNICAST_NORMAL_MODE | \
+ ETH_DEFAULT_RX_QUEUE_0 | \
+ ETH_DEFAULT_RX_ARP_QUEUE_0 | \
+ ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP | \
+ ETH_RECEIVE_BC_IF_IP | \
+ ETH_RECEIVE_BC_IF_ARP | \
+ ETH_CAPTURE_TCP_FRAMES_DIS | \
+ ETH_CAPTURE_UDP_FRAMES_DIS | \
+ ETH_DEFAULT_RX_TCP_QUEUE_0 | \
+ ETH_DEFAULT_RX_UDP_QUEUE_0 | \
+ ETH_DEFAULT_RX_BPDU_QUEUE_0
+
+/* Default port extend configuration value */
+#define PORT_CONFIG_EXTEND_VALUE \
+ ETH_SPAN_BPDU_PACKETS_AS_NORMAL | \
+ ETH_PARTITION_DISABLE
+
+
+/* Default sdma control value */
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define PORT_SDMA_CONFIG_VALUE \
+ ETH_RX_BURST_SIZE_16_64BIT | \
+ GT_ETH_IPG_INT_RX(0) | \
+ ETH_TX_BURST_SIZE_16_64BIT;
+#else
+#define PORT_SDMA_CONFIG_VALUE \
+ ETH_RX_BURST_SIZE_4_64BIT | \
+ GT_ETH_IPG_INT_RX(0) | \
+ ETH_TX_BURST_SIZE_4_64BIT;
+#endif
+
+#define GT_ETH_IPG_INT_RX(value) \
+ ((value & 0x3fff) << 8)
+
+/* Default port serial control value */
+#define PORT_SERIAL_CONTROL_VALUE \
+ ETH_FORCE_LINK_PASS | \
+ ETH_ENABLE_AUTO_NEG_FOR_DUPLX | \
+ ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL | \
+ ETH_ADV_SYMMETRIC_FLOW_CTRL | \
+ ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \
+ ETH_FORCE_BP_MODE_NO_JAM | \
+ BIT9 | \
+ ETH_DO_NOT_FORCE_LINK_FAIL | \
+ ETH_RETRANSMIT_16_ETTEMPTS | \
+ ETH_ENABLE_AUTO_NEG_SPEED_GMII | \
+ ETH_DTE_ADV_0 | \
+ ETH_DISABLE_AUTO_NEG_BYPASS | \
+ ETH_AUTO_NEG_NO_CHANGE | \
+ ETH_MAX_RX_PACKET_1552BYTE | \
+ ETH_CLR_EXT_LOOPBACK | \
+ ETH_SET_FULL_DUPLEX_MODE | \
+ ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX;
+
+#define RX_BUFFER_MAX_SIZE 0xFFFF
+#define TX_BUFFER_MAX_SIZE 0xFFFF /* Buffer are limited to 64k */
+
+#define RX_BUFFER_MIN_SIZE 0x8
+#define TX_BUFFER_MIN_SIZE 0x8
+
+/* Tx WRR confoguration macros */
+#define PORT_MAX_TRAN_UNIT 0x24 /* MTU register (default) 9KByte */
+#define PORT_MAX_TOKEN_BUCKET_SIZE 0x_fFFF /* PMTBS register (default) */
+#define PORT_TOKEN_RATE 1023 /* PTTBRC register (default) */
+
+/* MAC accepet/reject macros */
+#define ACCEPT_MAC_ADDR 0
+#define REJECT_MAC_ADDR 1
+
+/* Size of a Tx/Rx descriptor used in chain list data structure */
+#define RX_DESC_ALIGNED_SIZE 0x20
+#define TX_DESC_ALIGNED_SIZE 0x20
+
+/* An offest in Tx descriptors to store data for buffers less than 8 Bytes */
+#define TX_BUF_OFFSET_IN_DESC 0x18
+/* Buffer offset from buffer pointer */
+#define RX_BUF_OFFSET 0x2
+
+/* Gap define */
+#define ETH_BAR_GAP 0x8
+#define ETH_SIZE_REG_GAP 0x8
+#define ETH_HIGH_ADDR_REMAP_REG_GAP 0x4
+#define ETH_PORT_ACCESS_CTRL_GAP 0x4
+
+/* Gigabit Ethernet Unit Global Registers */
+
+/* MIB Counters register definitions */
+#define ETH_MIB_GOOD_OCTETS_RECEIVED_LOW 0x0
+#define ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH 0x4
+#define ETH_MIB_BAD_OCTETS_RECEIVED 0x8
+#define ETH_MIB_INTERNAL_MAC_TRANSMIT_ERR 0xc
+#define ETH_MIB_GOOD_FRAMES_RECEIVED 0x10
+#define ETH_MIB_BAD_FRAMES_RECEIVED 0x14
+#define ETH_MIB_BROADCAST_FRAMES_RECEIVED 0x18
+#define ETH_MIB_MULTICAST_FRAMES_RECEIVED 0x1c
+#define ETH_MIB_FRAMES_64_OCTETS 0x20
+#define ETH_MIB_FRAMES_65_TO_127_OCTETS 0x24
+#define ETH_MIB_FRAMES_128_TO_255_OCTETS 0x28
+#define ETH_MIB_FRAMES_256_TO_511_OCTETS 0x2c
+#define ETH_MIB_FRAMES_512_TO_1023_OCTETS 0x30
+#define ETH_MIB_FRAMES_1024_TO_MAX_OCTETS 0x34
+#define ETH_MIB_GOOD_OCTETS_SENT_LOW 0x38
+#define ETH_MIB_GOOD_OCTETS_SENT_HIGH 0x3c
+#define ETH_MIB_GOOD_FRAMES_SENT 0x40
+#define ETH_MIB_EXCESSIVE_COLLISION 0x44
+#define ETH_MIB_MULTICAST_FRAMES_SENT 0x48
+#define ETH_MIB_BROADCAST_FRAMES_SENT 0x4c
+#define ETH_MIB_UNREC_MAC_CONTROL_RECEIVED 0x50
+#define ETH_MIB_FC_SENT 0x54
+#define ETH_MIB_GOOD_FC_RECEIVED 0x58
+#define ETH_MIB_BAD_FC_RECEIVED 0x5c
+#define ETH_MIB_UNDERSIZE_RECEIVED 0x60
+#define ETH_MIB_FRAGMENTS_RECEIVED 0x64
+#define ETH_MIB_OVERSIZE_RECEIVED 0x68
+#define ETH_MIB_JABBER_RECEIVED 0x6c
+#define ETH_MIB_MAC_RECEIVE_ERROR 0x70
+#define ETH_MIB_BAD_CRC_EVENT 0x74
+#define ETH_MIB_COLLISION 0x78
+#define ETH_MIB_LATE_COLLISION 0x7c
+
+/* Port serial status reg (PSR) */
+#define ETH_INTERFACE_GMII_MII 0
+#define ETH_INTERFACE_PCM BIT0
+#define ETH_LINK_IS_DOWN 0
+#define ETH_LINK_IS_UP BIT1
+#define ETH_PORT_AT_HALF_DUPLEX 0
+#define ETH_PORT_AT_FULL_DUPLEX BIT2
+#define ETH_RX_FLOW_CTRL_DISABLED 0
+#define ETH_RX_FLOW_CTRL_ENBALED BIT3
+#define ETH_GMII_SPEED_100_10 0
+#define ETH_GMII_SPEED_1000 BIT4
+#define ETH_MII_SPEED_10 0
+#define ETH_MII_SPEED_100 BIT5
+#define ETH_NO_TX 0
+#define ETH_TX_IN_PROGRESS BIT7
+#define ETH_BYPASS_NO_ACTIVE 0
+#define ETH_BYPASS_ACTIVE BIT8
+#define ETH_PORT_NOT_AT_PARTITION_STATE 0
+#define ETH_PORT_AT_PARTITION_STATE BIT9
+#define ETH_PORT_TX_FIFO_NOT_EMPTY 0
+#define ETH_PORT_TX_FIFO_EMPTY BIT10
+
+
+/* These macros describes the Port configuration reg (Px_cR) bits */
+#define ETH_UNICAST_NORMAL_MODE 0
+#define ETH_UNICAST_PROMISCUOUS_MODE BIT0
+#define ETH_DEFAULT_RX_QUEUE_0 0
+#define ETH_DEFAULT_RX_QUEUE_1 BIT1
+#define ETH_DEFAULT_RX_QUEUE_2 BIT2
+#define ETH_DEFAULT_RX_QUEUE_3 (BIT2 | BIT1)
+#define ETH_DEFAULT_RX_QUEUE_4 BIT3
+#define ETH_DEFAULT_RX_QUEUE_5 (BIT3 | BIT1)
+#define ETH_DEFAULT_RX_QUEUE_6 (BIT3 | BIT2)
+#define ETH_DEFAULT_RX_QUEUE_7 (BIT3 | BIT2 | BIT1)
+#define ETH_DEFAULT_RX_ARP_QUEUE_0 0
+#define ETH_DEFAULT_RX_ARP_QUEUE_1 BIT4
+#define ETH_DEFAULT_RX_ARP_QUEUE_2 BIT5
+#define ETH_DEFAULT_RX_ARP_QUEUE_3 (BIT5 | BIT4)
+#define ETH_DEFAULT_RX_ARP_QUEUE_4 BIT6
+#define ETH_DEFAULT_RX_ARP_QUEUE_5 (BIT6 | BIT4)
+#define ETH_DEFAULT_RX_ARP_QUEUE_6 (BIT6 | BIT5)
+#define ETH_DEFAULT_RX_ARP_QUEUE_7 (BIT6 | BIT5 | BIT4)
+#define ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP 0
+#define ETH_REJECT_BC_IF_NOT_IP_OR_ARP BIT7
+#define ETH_RECEIVE_BC_IF_IP 0
+#define ETH_REJECT_BC_IF_IP BIT8
+#define ETH_RECEIVE_BC_IF_ARP 0
+#define ETH_REJECT_BC_IF_ARP BIT9
+#define ETH_TX_AM_NO_UPDATE_ERROR_SUMMARY BIT12
+#define ETH_CAPTURE_TCP_FRAMES_DIS 0
+#define ETH_CAPTURE_TCP_FRAMES_EN BIT14
+#define ETH_CAPTURE_UDP_FRAMES_DIS 0
+#define ETH_CAPTURE_UDP_FRAMES_EN BIT15
+#define ETH_DEFAULT_RX_TCP_QUEUE_0 0
+#define ETH_DEFAULT_RX_TCP_QUEUE_1 BIT16
+#define ETH_DEFAULT_RX_TCP_QUEUE_2 BIT17
+#define ETH_DEFAULT_RX_TCP_QUEUE_3 (BIT17 | BIT16)
+#define ETH_DEFAULT_RX_TCP_QUEUE_4 BIT18
+#define ETH_DEFAULT_RX_TCP_QUEUE_5 (BIT18 | BIT16)
+#define ETH_DEFAULT_RX_TCP_QUEUE_6 (BIT18 | BIT17)
+#define ETH_DEFAULT_RX_TCP_QUEUE_7 (BIT18 | BIT17 | BIT16)
+#define ETH_DEFAULT_RX_UDP_QUEUE_0 0
+#define ETH_DEFAULT_RX_UDP_QUEUE_1 BIT19
+#define ETH_DEFAULT_RX_UDP_QUEUE_2 BIT20
+#define ETH_DEFAULT_RX_UDP_QUEUE_3 (BIT20 | BIT19)
+#define ETH_DEFAULT_RX_UDP_QUEUE_4 (BIT21
+#define ETH_DEFAULT_RX_UDP_QUEUE_5 (BIT21 | BIT19)
+#define ETH_DEFAULT_RX_UDP_QUEUE_6 (BIT21 | BIT20)
+#define ETH_DEFAULT_RX_UDP_QUEUE_7 (BIT21 | BIT20 | BIT19)
+#define ETH_DEFAULT_RX_BPDU_QUEUE_0 0
+#define ETH_DEFAULT_RX_BPDU_QUEUE_1 BIT22
+#define ETH_DEFAULT_RX_BPDU_QUEUE_2 BIT23
+#define ETH_DEFAULT_RX_BPDU_QUEUE_3 (BIT23 | BIT22)
+#define ETH_DEFAULT_RX_BPDU_QUEUE_4 BIT24
+#define ETH_DEFAULT_RX_BPDU_QUEUE_5 (BIT24 | BIT22)
+#define ETH_DEFAULT_RX_BPDU_QUEUE_6 (BIT24 | BIT23)
+#define ETH_DEFAULT_RX_BPDU_QUEUE_7 (BIT24 | BIT23 | BIT22)
+
+
+/* These macros describes the Port configuration extend reg (Px_cXR) bits*/
+#define ETH_CLASSIFY_EN BIT0
+#define ETH_SPAN_BPDU_PACKETS_AS_NORMAL 0
+#define ETH_SPAN_BPDU_PACKETS_TO_RX_QUEUE_7 BIT1
+#define ETH_PARTITION_DISABLE 0
+#define ETH_PARTITION_ENABLE BIT2
+
+
+/* Tx/Rx queue command reg (RQCR/TQCR)*/
+#define ETH_QUEUE_0_ENABLE BIT0
+#define ETH_QUEUE_1_ENABLE BIT1
+#define ETH_QUEUE_2_ENABLE BIT2
+#define ETH_QUEUE_3_ENABLE BIT3
+#define ETH_QUEUE_4_ENABLE BIT4
+#define ETH_QUEUE_5_ENABLE BIT5
+#define ETH_QUEUE_6_ENABLE BIT6
+#define ETH_QUEUE_7_ENABLE BIT7
+#define ETH_QUEUE_0_DISABLE BIT8
+#define ETH_QUEUE_1_DISABLE BIT9
+#define ETH_QUEUE_2_DISABLE BIT10
+#define ETH_QUEUE_3_DISABLE BIT11
+#define ETH_QUEUE_4_DISABLE BIT12
+#define ETH_QUEUE_5_DISABLE BIT13
+#define ETH_QUEUE_6_DISABLE BIT14
+#define ETH_QUEUE_7_DISABLE BIT15
+
+/* These macros describes the Port Sdma configuration reg (SDCR) bits */
+#define ETH_RIFB BIT0
+#define ETH_RX_BURST_SIZE_1_64BIT 0
+#define ETH_RX_BURST_SIZE_2_64BIT BIT1
+#define ETH_RX_BURST_SIZE_4_64BIT BIT2
+#define ETH_RX_BURST_SIZE_8_64BIT (BIT2 | BIT1)
+#define ETH_RX_BURST_SIZE_16_64BIT BIT3
+#define ETH_BLM_RX_NO_SWAP BIT4
+#define ETH_BLM_RX_BYTE_SWAP 0
+#define ETH_BLM_TX_NO_SWAP BIT5
+#define ETH_BLM_TX_BYTE_SWAP 0
+#define ETH_DESCRIPTORS_BYTE_SWAP BIT6
+#define ETH_DESCRIPTORS_NO_SWAP 0
+#define ETH_TX_BURST_SIZE_1_64BIT 0
+#define ETH_TX_BURST_SIZE_2_64BIT BIT22
+#define ETH_TX_BURST_SIZE_4_64BIT BIT23
+#define ETH_TX_BURST_SIZE_8_64BIT (BIT23 | BIT22)
+#define ETH_TX_BURST_SIZE_16_64BIT BIT24
+
+/* These macros describes the Port serial control reg (PSCR) bits */
+#define ETH_SERIAL_PORT_DISABLE 0
+#define ETH_SERIAL_PORT_ENABLE BIT0
+#define ETH_FORCE_LINK_PASS BIT1
+#define ETH_DO_NOT_FORCE_LINK_PASS 0
+#define ETH_ENABLE_AUTO_NEG_FOR_DUPLX 0
+#define ETH_DISABLE_AUTO_NEG_FOR_DUPLX BIT2
+#define ETH_ENABLE_AUTO_NEG_FOR_FLOW_CTRL 0
+#define ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL BIT3
+#define ETH_ADV_NO_FLOW_CTRL 0
+#define ETH_ADV_SYMMETRIC_FLOW_CTRL BIT4
+#define ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX 0
+#define ETH_FORCE_FC_MODE_TX_PAUSE_DIS BIT5
+#define ETH_FORCE_BP_MODE_NO_JAM 0
+#define ETH_FORCE_BP_MODE_JAM_TX BIT7
+#define ETH_FORCE_BP_MODE_JAM_TX_ON_RX_ERR BIT8
+#define ETH_FORCE_LINK_FAIL 0
+#define ETH_DO_NOT_FORCE_LINK_FAIL BIT10
+#define ETH_RETRANSMIT_16_ETTEMPTS 0
+#define ETH_RETRANSMIT_FOREVER BIT11
+#define ETH_DISABLE_AUTO_NEG_SPEED_GMII BIT13
+#define ETH_ENABLE_AUTO_NEG_SPEED_GMII 0
+#define ETH_DTE_ADV_0 0
+#define ETH_DTE_ADV_1 BIT14
+#define ETH_DISABLE_AUTO_NEG_BYPASS 0
+#define ETH_ENABLE_AUTO_NEG_BYPASS BIT15
+#define ETH_AUTO_NEG_NO_CHANGE 0
+#define ETH_RESTART_AUTO_NEG BIT16
+#define ETH_MAX_RX_PACKET_1518BYTE 0
+#define ETH_MAX_RX_PACKET_1522BYTE BIT17
+#define ETH_MAX_RX_PACKET_1552BYTE BIT18
+#define ETH_MAX_RX_PACKET_9022BYTE (BIT18 | BIT17)
+#define ETH_MAX_RX_PACKET_9192BYTE BIT19
+#define ETH_MAX_RX_PACKET_9700BYTE (BIT19 | BIT17)
+#define ETH_SET_EXT_LOOPBACK BIT20
+#define ETH_CLR_EXT_LOOPBACK 0
+#define ETH_SET_FULL_DUPLEX_MODE BIT21
+#define ETH_SET_HALF_DUPLEX_MODE 0
+#define ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX BIT22
+#define ETH_DISABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX 0
+#define ETH_SET_GMII_SPEED_TO_10_100 0
+#define ETH_SET_GMII_SPEED_TO_1000 BIT23
+#define ETH_SET_MII_SPEED_TO_10 0
+#define ETH_SET_MII_SPEED_TO_100 BIT24
+
+
+/* SMI reg */
+#define ETH_SMI_BUSY BIT28 /* 0 - Write, 1 - Read */
+#define ETH_SMI_READ_VALID BIT27 /* 0 - Write, 1 - Read */
+#define ETH_SMI_OPCODE_WRITE 0 /* Completion of Read operation */
+#define ETH_SMI_OPCODE_READ BIT26 /* Operation is in progress */
+
+/* SDMA command status fields macros */
+
+/* Tx & Rx descriptors status */
+#define ETH_ERROR_SUMMARY (BIT0)
+
+/* Tx & Rx descriptors command */
+#define ETH_BUFFER_OWNED_BY_DMA (BIT31)
+
+/* Tx descriptors status */
+#define ETH_LC_ERROR (0 )
+#define ETH_UR_ERROR (BIT1 )
+#define ETH_RL_ERROR (BIT2 )
+#define ETH_LLC_SNAP_FORMAT (BIT9 )
+
+/* Rx descriptors status */
+#define ETH_CRC_ERROR (0 )
+#define ETH_OVERRUN_ERROR (BIT1 )
+#define ETH_MAX_FRAME_LENGTH_ERROR (BIT2 )
+#define ETH_RESOURCE_ERROR ((BIT2 | BIT1))
+#define ETH_VLAN_TAGGED (BIT19)
+#define ETH_BPDU_FRAME (BIT20)
+#define ETH_TCP_FRAME_OVER_IP_V_4 (0 )
+#define ETH_UDP_FRAME_OVER_IP_V_4 (BIT21)
+#define ETH_OTHER_FRAME_TYPE (BIT22)
+#define ETH_LAYER_2_IS_ETH_V_2 (BIT23)
+#define ETH_FRAME_TYPE_IP_V_4 (BIT24)
+#define ETH_FRAME_HEADER_OK (BIT25)
+#define ETH_RX_LAST_DESC (BIT26)
+#define ETH_RX_FIRST_DESC (BIT27)
+#define ETH_UNKNOWN_DESTINATION_ADDR (BIT28)
+#define ETH_RX_ENABLE_INTERRUPT (BIT29)
+#define ETH_LAYER_4_CHECKSUM_OK (BIT30)
+
+/* Rx descriptors byte count */
+#define ETH_FRAME_FRAGMENTED (BIT2)
+
+/* Tx descriptors command */
+#define ETH_LAYER_4_CHECKSUM_FIRST_DESC (BIT10)
+#define ETH_FRAME_SET_TO_VLAN (BIT15)
+#define ETH_TCP_FRAME (0 )
+#define ETH_UDP_FRAME (BIT16)
+#define ETH_GEN_TCP_UDP_CHECKSUM (BIT17)
+#define ETH_GEN_IP_V_4_CHECKSUM (BIT18)
+#define ETH_ZERO_PADDING (BIT19)
+#define ETH_TX_LAST_DESC (BIT20)
+#define ETH_TX_FIRST_DESC (BIT21)
+#define ETH_GEN_CRC (BIT22)
+#define ETH_TX_ENABLE_INTERRUPT (BIT23)
+#define ETH_AUTO_MODE (BIT30)
+
+/* Address decode parameters */
+/* Ethernet Base Address Register bits */
+#define EBAR_TARGET_DRAM 0x00000000
+#define EBAR_TARGET_DEVICE 0x00000001
+#define EBAR_TARGET_CBS 0x00000002
+#define EBAR_TARGET_PCI0 0x00000003
+#define EBAR_TARGET_PCI1 0x00000004
+#define EBAR_TARGET_CUNIT 0x00000005
+#define EBAR_TARGET_AUNIT 0x00000006
+#define EBAR_TARGET_GUNIT 0x00000007
+
+/* Window attributes */
+#define EBAR_ATTR_DRAM_CS0 0x00000E00
+#define EBAR_ATTR_DRAM_CS1 0x00000D00
+#define EBAR_ATTR_DRAM_CS2 0x00000B00
+#define EBAR_ATTR_DRAM_CS3 0x00000700
+
+/* DRAM Target interface */
+#define EBAR_ATTR_DRAM_NO_CACHE_COHERENCY 0x00000000
+#define EBAR_ATTR_DRAM_CACHE_COHERENCY_WT 0x00001000
+#define EBAR_ATTR_DRAM_CACHE_COHERENCY_WB 0x00002000
+
+/* Device Bus Target interface */
+#define EBAR_ATTR_DEVICE_DEVCS0 0x00001E00
+#define EBAR_ATTR_DEVICE_DEVCS1 0x00001D00
+#define EBAR_ATTR_DEVICE_DEVCS2 0x00001B00
+#define EBAR_ATTR_DEVICE_DEVCS3 0x00001700
+#define EBAR_ATTR_DEVICE_BOOTCS3 0x00000F00
+
+/* PCI Target interface */
+#define EBAR_ATTR_PCI_BYTE_SWAP 0x00000000
+#define EBAR_ATTR_PCI_NO_SWAP 0x00000100
+#define EBAR_ATTR_PCI_BYTE_WORD_SWAP 0x00000200
+#define EBAR_ATTR_PCI_WORD_SWAP 0x00000300
+#define EBAR_ATTR_PCI_NO_SNOOP_NOT_ASSERT 0x00000000
+#define EBAR_ATTR_PCI_NO_SNOOP_ASSERT 0x00000400
+#define EBAR_ATTR_PCI_IO_SPACE 0x00000000
+#define EBAR_ATTR_PCI_MEMORY_SPACE 0x00000800
+#define EBAR_ATTR_PCI_REQ64_FORCE 0x00000000
+#define EBAR_ATTR_PCI_REQ64_SIZE 0x00001000
+
+/* CPU 60x bus or internal SRAM interface */
+#define EBAR_ATTR_CBS_SRAM_BLOCK0 0x00000000
+#define EBAR_ATTR_CBS_SRAM_BLOCK1 0x00000100
+#define EBAR_ATTR_CBS_SRAM 0x00000000
+#define EBAR_ATTR_CBS_CPU_BUS 0x00000800
+
+/* Window access control */
+#define EWIN_ACCESS_NOT_ALLOWED 0
+#define EWIN_ACCESS_READ_ONLY BIT0
+#define EWIN_ACCESS_FULL (BIT1 | BIT0)
+#define EWIN0_ACCESS_MASK 0x0003
+#define EWIN1_ACCESS_MASK 0x000C
+#define EWIN2_ACCESS_MASK 0x0030
+#define EWIN3_ACCESS_MASK 0x00C0
+
+/* typedefs */
+
+typedef enum _eth_port
+{
+ ETH_0 = 0,
+ ETH_1 = 1,
+ ETH_2 = 2
+}ETH_PORT;
+
+typedef enum _eth_func_ret_status
+{
+ ETH_OK, /* Returned as expected. */
+ ETH_ERROR, /* Fundamental error. */
+ ETH_RETRY, /* Could not process request. Try later. */
+ ETH_END_OF_JOB, /* Ring has nothing to process. */
+ ETH_QUEUE_FULL, /* Ring resource error. */
+ ETH_QUEUE_LAST_RESOURCE /* Ring resources about to exhaust. */
+}ETH_FUNC_RET_STATUS;
+
+typedef enum _eth_queue
+{
+ ETH_Q0 = 0,
+ ETH_Q1 = 1,
+ ETH_Q2 = 2,
+ ETH_Q3 = 3,
+ ETH_Q4 = 4,
+ ETH_Q5 = 5,
+ ETH_Q6 = 6,
+ ETH_Q7 = 7
+} ETH_QUEUE;
+
+typedef enum _addr_win
+{
+ ETH_WIN0,
+ ETH_WIN1,
+ ETH_WIN2,
+ ETH_WIN3,
+ ETH_WIN4,
+ ETH_WIN5
+} ETH_ADDR_WIN;
+
+typedef enum _eth_target
+{
+ ETH_TARGET_DRAM ,
+ ETH_TARGET_DEVICE,
+ ETH_TARGET_CBS ,
+ ETH_TARGET_PCI0 ,
+ ETH_TARGET_PCI1
+}ETH_TARGET;
+
+typedef struct _eth_rx_desc
+{
+ unsigned short byte_cnt ; /* Descriptor buffer byte count */
+ unsigned short buf_size ; /* Buffer size */
+ unsigned int cmd_sts ; /* Descriptor command status */
+ unsigned int next_desc_ptr; /* Next descriptor pointer */
+ unsigned int buf_ptr ; /* Descriptor buffer pointer */
+ unsigned int return_info ; /* User resource return information */
+} ETH_RX_DESC;
+
+
+typedef struct _eth_tx_desc
+{
+ unsigned short byte_cnt ; /* Descriptor buffer byte count */
+ unsigned short l4i_chk ; /* CPU provided TCP Checksum */
+ unsigned int cmd_sts ; /* Descriptor command status */
+ unsigned int next_desc_ptr; /* Next descriptor pointer */
+ unsigned int buf_ptr ; /* Descriptor buffer pointer */
+ unsigned int return_info ; /* User resource return information */
+} ETH_TX_DESC;
+
+/* Unified struct for Rx and Tx operations. The user is not required to */
+/* be familier with neither Tx nor Rx descriptors. */
+typedef struct _pkt_info
+{
+ unsigned short byte_cnt ; /* Descriptor buffer byte count */
+ unsigned short l4i_chk ; /* Tx CPU provided TCP Checksum */
+ unsigned int cmd_sts ; /* Descriptor command status */
+ unsigned int buf_ptr ; /* Descriptor buffer pointer */
+ unsigned int return_info ; /* User resource return information */
+} PKT_INFO;
+
+
+typedef struct _eth_win_param
+{
+ ETH_ADDR_WIN win; /* Window number. See ETH_ADDR_WIN enum */
+ ETH_TARGET target; /* System targets. See ETH_TARGET enum */
+ unsigned short attributes; /* BAR attributes. See above macros. */
+ unsigned int base_addr; /* Window base address in unsigned int form */
+ unsigned int high_addr; /* Window high address in unsigned int form */
+ unsigned int size; /* Size in MBytes. Must be % 64Kbyte. */
+ bool enable; /* Enable/disable access to the window. */
+ unsigned short access_ctrl; /* Access ctrl register. see above macros */
+} ETH_WIN_PARAM;
+
+
+/* Ethernet port specific infomation */
+
+typedef struct _eth_port_ctrl
+{
+ ETH_PORT port_num; /* User Ethernet port number */
+ int port_phy_addr; /* User phy address of Ethrnet port */
+ unsigned char port_mac_addr[6]; /* User defined port MAC address. */
+ unsigned int port_config; /* User port configuration value */
+ unsigned int port_config_extend; /* User port config extend value */
+ unsigned int port_sdma_config; /* User port SDMA config value */
+ unsigned int port_serial_control; /* User port serial control value */
+ unsigned int port_tx_queue_command; /* Port active Tx queues summary */
+ unsigned int port_rx_queue_command; /* Port active Rx queues summary */
+
+ /* User function to cast virtual address to CPU bus address */
+ unsigned int (*port_virt_to_phys)(unsigned int addr);
+ /* User scratch pad for user specific data structures */
+ void *port_private;
+
+ bool rx_resource_err[MAX_RX_QUEUE_NUM]; /* Rx ring resource error flag */
+ bool tx_resource_err[MAX_TX_QUEUE_NUM]; /* Tx ring resource error flag */
+
+ /* Tx/Rx rings managment indexes fields. For driver use */
+
+ /* Next available Rx resource */
+ volatile ETH_RX_DESC *p_rx_curr_desc_q[MAX_RX_QUEUE_NUM];
+ /* Returning Rx resource */
+ volatile ETH_RX_DESC *p_rx_used_desc_q[MAX_RX_QUEUE_NUM];
+
+ /* Next available Tx resource */
+ volatile ETH_TX_DESC *p_tx_curr_desc_q[MAX_TX_QUEUE_NUM];
+ /* Returning Tx resource */
+ volatile ETH_TX_DESC *p_tx_used_desc_q[MAX_TX_QUEUE_NUM];
+ /* An extra Tx index to support transmit of multiple buffers per packet */
+ volatile ETH_TX_DESC *p_tx_first_desc_q[MAX_TX_QUEUE_NUM];
+
+ /* Tx/Rx rings size and base variables fields. For driver use */
+
+ volatile ETH_RX_DESC *p_rx_desc_area_base[MAX_RX_QUEUE_NUM];
+ unsigned int rx_desc_area_size[MAX_RX_QUEUE_NUM];
+ char *p_rx_buffer_base[MAX_RX_QUEUE_NUM];
+
+ volatile ETH_TX_DESC *p_tx_desc_area_base[MAX_TX_QUEUE_NUM];
+ unsigned int tx_desc_area_size[MAX_TX_QUEUE_NUM];
+ char *p_tx_buffer_base[MAX_TX_QUEUE_NUM];
+
+} ETH_PORT_INFO;
+
+
+/* ethernet.h API list */
+
+/* Port operation control routines */
+static void eth_port_init (ETH_PORT_INFO *p_eth_port_ctrl);
+static void eth_port_reset(ETH_PORT eth_port_num);
+static bool eth_port_start(ETH_PORT_INFO *p_eth_port_ctrl);
+
+
+/* Port MAC address routines */
+static void eth_port_uc_addr_set (ETH_PORT eth_port_num,
+ unsigned char *p_addr,
+ ETH_QUEUE queue);
+#if 0 /* FIXME */
+static void eth_port_mc_addr (ETH_PORT eth_port_num,
+ unsigned char *p_addr,
+ ETH_QUEUE queue,
+ int option);
+#endif
+
+/* PHY and MIB routines */
+static bool ethernet_phy_reset(ETH_PORT eth_port_num);
+
+static bool eth_port_write_smi_reg(ETH_PORT eth_port_num,
+ unsigned int phy_reg,
+ unsigned int value);
+
+static bool eth_port_read_smi_reg(ETH_PORT eth_port_num,
+ unsigned int phy_reg,
+ unsigned int* value);
+
+static void eth_clear_mib_counters(ETH_PORT eth_port_num);
+
+/* Port data flow control routines */
+static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO *p_eth_port_ctrl,
+ ETH_QUEUE tx_queue,
+ PKT_INFO *p_pkt_info);
+static ETH_FUNC_RET_STATUS eth_tx_return_desc(ETH_PORT_INFO *p_eth_port_ctrl,
+ ETH_QUEUE tx_queue,
+ PKT_INFO *p_pkt_info);
+static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO *p_eth_port_ctrl,
+ ETH_QUEUE rx_queue,
+ PKT_INFO *p_pkt_info);
+static ETH_FUNC_RET_STATUS eth_rx_return_buff(ETH_PORT_INFO *p_eth_port_ctrl,
+ ETH_QUEUE rx_queue,
+ PKT_INFO *p_pkt_info);
+
+
+static bool ether_init_tx_desc_ring(ETH_PORT_INFO *p_eth_port_ctrl,
+ ETH_QUEUE tx_queue,
+ int tx_desc_num,
+ int tx_buff_size,
+ unsigned int tx_desc_base_addr,
+ unsigned int tx_buff_base_addr);
+
+static bool ether_init_rx_desc_ring(ETH_PORT_INFO *p_eth_port_ctrl,
+ ETH_QUEUE rx_queue,
+ int rx_desc_num,
+ int rx_buff_size,
+ unsigned int rx_desc_base_addr,
+ unsigned int rx_buff_base_addr);
+
+#endif /* MV64460_ETH_ */
diff --git a/board/prodrive/p3mx/mv_regs.h b/board/prodrive/p3mx/mv_regs.h
new file mode 100644
index 0000000..068590f
--- /dev/null
+++ b/board/prodrive/p3mx/mv_regs.h
@@ -0,0 +1,1125 @@
+/*
+ * (C) Copyright 2003
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ * based on - Driver for MV64460X ethernet ports
+ * Copyright (C) 2002 rabeeh@galileo.co.il
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/********************************************************************************
+* gt64460r.h - GT-64460 Internal registers definition file.
+*
+* DESCRIPTION:
+* None.
+*
+* DEPENDENCIES:
+* None.
+*
+*******************************************************************************/
+
+#ifndef __INCmv_regsh
+#define __INCmv_regsh
+
+#define MV64460
+
+/* Supported by the Atlantis */
+#define MV64460_INCLUDE_PCI_1
+#define MV64460_INCLUDE_PCI_0_ARBITER
+#define MV64460_INCLUDE_PCI_1_ARBITER
+#define MV64460_INCLUDE_SNOOP_SUPPORT
+#define MV64460_INCLUDE_P2P
+#define MV64460_INCLUDE_ETH_PORT_2
+#define MV64460_INCLUDE_CPU_MAPPING
+#define MV64460_INCLUDE_MPSC
+
+/* Not supported features */
+#undef INCLUDE_CNTMR_4_7
+#undef INCLUDE_DMA_4_7
+
+/****************************************/
+/* Processor Address Space */
+/****************************************/
+
+/* DDR SDRAM BAR and size registers */
+
+#define MV64460_CS_0_BASE_ADDR 0x008
+#define MV64460_CS_0_SIZE 0x010
+#define MV64460_CS_1_BASE_ADDR 0x208
+#define MV64460_CS_1_SIZE 0x210
+#define MV64460_CS_2_BASE_ADDR 0x018
+#define MV64460_CS_2_SIZE 0x020
+#define MV64460_CS_3_BASE_ADDR 0x218
+#define MV64460_CS_3_SIZE 0x220
+
+/* Devices BAR and size registers */
+
+#define MV64460_DEV_CS0_BASE_ADDR 0x028
+#define MV64460_DEV_CS0_SIZE 0x030
+#define MV64460_DEV_CS1_BASE_ADDR 0x228
+#define MV64460_DEV_CS1_SIZE 0x230
+#define MV64460_DEV_CS2_BASE_ADDR 0x248
+#define MV64460_DEV_CS2_SIZE 0x250
+#define MV64460_DEV_CS3_BASE_ADDR 0x038
+#define MV64460_DEV_CS3_SIZE 0x040
+#define MV64460_BOOTCS_BASE_ADDR 0x238
+#define MV64460_BOOTCS_SIZE 0x240
+
+/* PCI 0 BAR and size registers */
+
+#define MV64460_PCI_0_IO_BASE_ADDR 0x048
+#define MV64460_PCI_0_IO_SIZE 0x050
+#define MV64460_PCI_0_MEMORY0_BASE_ADDR 0x058
+#define MV64460_PCI_0_MEMORY0_SIZE 0x060
+#define MV64460_PCI_0_MEMORY1_BASE_ADDR 0x080
+#define MV64460_PCI_0_MEMORY1_SIZE 0x088
+#define MV64460_PCI_0_MEMORY2_BASE_ADDR 0x258
+#define MV64460_PCI_0_MEMORY2_SIZE 0x260
+#define MV64460_PCI_0_MEMORY3_BASE_ADDR 0x280
+#define MV64460_PCI_0_MEMORY3_SIZE 0x288
+
+/* PCI 1 BAR and size registers */
+#define MV64460_PCI_1_IO_BASE_ADDR 0x090
+#define MV64460_PCI_1_IO_SIZE 0x098
+#define MV64460_PCI_1_MEMORY0_BASE_ADDR 0x0a0
+#define MV64460_PCI_1_MEMORY0_SIZE 0x0a8
+#define MV64460_PCI_1_MEMORY1_BASE_ADDR 0x0b0
+#define MV64460_PCI_1_MEMORY1_SIZE 0x0b8
+#define MV64460_PCI_1_MEMORY2_BASE_ADDR 0x2a0
+#define MV64460_PCI_1_MEMORY2_SIZE 0x2a8
+#define MV64460_PCI_1_MEMORY3_BASE_ADDR 0x2b0
+#define MV64460_PCI_1_MEMORY3_SIZE 0x2b8
+
+/* SRAM base address */
+#define MV64460_INTEGRATED_SRAM_BASE_ADDR 0x268
+
+/* internal registers space base address */
+#define MV64460_INTERNAL_SPACE_BASE_ADDR 0x068
+
+/* Enables the CS , DEV_CS , PCI 0 and PCI 1
+ windows above */
+#define MV64460_BASE_ADDR_ENABLE 0x278
+
+/****************************************/
+/* PCI remap registers */
+/****************************************/
+ /* PCI 0 */
+#define MV64460_PCI_0_IO_ADDR_REMAP 0x0f0
+#define MV64460_PCI_0_MEMORY0_LOW_ADDR_REMAP 0x0f8
+#define MV64460_PCI_0_MEMORY0_HIGH_ADDR_REMAP 0x320
+#define MV64460_PCI_0_MEMORY1_LOW_ADDR_REMAP 0x100
+#define MV64460_PCI_0_MEMORY1_HIGH_ADDR_REMAP 0x328
+#define MV64460_PCI_0_MEMORY2_LOW_ADDR_REMAP 0x2f8
+#define MV64460_PCI_0_MEMORY2_HIGH_ADDR_REMAP 0x330
+#define MV64460_PCI_0_MEMORY3_LOW_ADDR_REMAP 0x300
+#define MV64460_PCI_0_MEMORY3_HIGH_ADDR_REMAP 0x338
+ /* PCI 1 */
+#define MV64460_PCI_1_IO_ADDR_REMAP 0x108
+#define MV64460_PCI_1_MEMORY0_LOW_ADDR_REMAP 0x110
+#define MV64460_PCI_1_MEMORY0_HIGH_ADDR_REMAP 0x340
+#define MV64460_PCI_1_MEMORY1_LOW_ADDR_REMAP 0x118
+#define MV64460_PCI_1_MEMORY1_HIGH_ADDR_REMAP 0x348
+#define MV64460_PCI_1_MEMORY2_LOW_ADDR_REMAP 0x310
+#define MV64460_PCI_1_MEMORY2_HIGH_ADDR_REMAP 0x350
+#define MV64460_PCI_1_MEMORY3_LOW_ADDR_REMAP 0x318
+#define MV64460_PCI_1_MEMORY3_HIGH_ADDR_REMAP 0x358
+
+#define MV64460_CPU_PCI_0_HEADERS_RETARGET_CONTROL 0x3b0
+#define MV64460_CPU_PCI_0_HEADERS_RETARGET_BASE 0x3b8
+#define MV64460_CPU_PCI_1_HEADERS_RETARGET_CONTROL 0x3c0
+#define MV64460_CPU_PCI_1_HEADERS_RETARGET_BASE 0x3c8
+#define MV64460_CPU_GE_HEADERS_RETARGET_CONTROL 0x3d0
+#define MV64460_CPU_GE_HEADERS_RETARGET_BASE 0x3d8
+#define MV64460_CPU_IDMA_HEADERS_RETARGET_CONTROL 0x3e0
+#define MV64460_CPU_IDMA_HEADERS_RETARGET_BASE 0x3e8
+
+/****************************************/
+/* CPU Control Registers */
+/****************************************/
+
+#define MV64460_CPU_CONFIG 0x000
+#define MV64460_CPU_MODE 0x120
+#define MV64460_CPU_MASTER_CONTROL 0x160
+#define MV64460_CPU_CROSS_BAR_CONTROL_LOW 0x150
+#define MV64460_CPU_CROSS_BAR_CONTROL_HIGH 0x158
+#define MV64460_CPU_CROSS_BAR_TIMEOUT 0x168
+
+/****************************************/
+/* SMP RegisterS */
+/****************************************/
+
+#define MV64460_SMP_WHO_AM_I 0x200
+#define MV64460_SMP_CPU0_DOORBELL 0x214
+#define MV64460_SMP_CPU0_DOORBELL_CLEAR 0x21C
+#define MV64460_SMP_CPU1_DOORBELL 0x224
+#define MV64460_SMP_CPU1_DOORBELL_CLEAR 0x22C
+#define MV64460_SMP_CPU0_DOORBELL_MASK 0x234
+#define MV64460_SMP_CPU1_DOORBELL_MASK 0x23C
+#define MV64460_SMP_SEMAPHOR0 0x244
+#define MV64460_SMP_SEMAPHOR1 0x24c
+#define MV64460_SMP_SEMAPHOR2 0x254
+#define MV64460_SMP_SEMAPHOR3 0x25c
+#define MV64460_SMP_SEMAPHOR4 0x264
+#define MV64460_SMP_SEMAPHOR5 0x26c
+#define MV64460_SMP_SEMAPHOR6 0x274
+#define MV64460_SMP_SEMAPHOR7 0x27c
+
+/****************************************/
+/* CPU Sync Barrier Register */
+/****************************************/
+
+#define MV64460_CPU_0_SYNC_BARRIER_TRIGGER 0x0c0
+#define MV64460_CPU_0_SYNC_BARRIER_VIRTUAL 0x0c8
+#define MV64460_CPU_1_SYNC_BARRIER_TRIGGER 0x0d0
+#define MV64460_CPU_1_SYNC_BARRIER_VIRTUAL 0x0d8
+
+/****************************************/
+/* CPU Access Protect */
+/****************************************/
+
+#define MV64460_CPU_PROTECT_WINDOW_0_BASE_ADDR 0x180
+#define MV64460_CPU_PROTECT_WINDOW_0_SIZE 0x188
+#define MV64460_CPU_PROTECT_WINDOW_1_BASE_ADDR 0x190
+#define MV64460_CPU_PROTECT_WINDOW_1_SIZE 0x198
+#define MV64460_CPU_PROTECT_WINDOW_2_BASE_ADDR 0x1a0
+#define MV64460_CPU_PROTECT_WINDOW_2_SIZE 0x1a8
+#define MV64460_CPU_PROTECT_WINDOW_3_BASE_ADDR 0x1b0
+#define MV64460_CPU_PROTECT_WINDOW_3_SIZE 0x1b8
+
+
+/****************************************/
+/* CPU Error Report */
+/****************************************/
+
+#define MV64460_CPU_ERROR_ADDR_LOW 0x070
+#define MV64460_CPU_ERROR_ADDR_HIGH 0x078
+#define MV64460_CPU_ERROR_DATA_LOW 0x128
+#define MV64460_CPU_ERROR_DATA_HIGH 0x130
+#define MV64460_CPU_ERROR_PARITY 0x138
+#define MV64460_CPU_ERROR_CAUSE 0x140
+#define MV64460_CPU_ERROR_MASK 0x148
+
+/****************************************/
+/* CPU Interface Debug Registers */
+/****************************************/
+
+#define MV64460_PUNIT_SLAVE_DEBUG_LOW 0x360
+#define MV64460_PUNIT_SLAVE_DEBUG_HIGH 0x368
+#define MV64460_PUNIT_MASTER_DEBUG_LOW 0x370
+#define MV64460_PUNIT_MASTER_DEBUG_HIGH 0x378
+#define MV64460_PUNIT_MMASK 0x3e4
+
+/****************************************/
+/* Integrated SRAM Registers */
+/****************************************/
+
+#define MV64460_SRAM_CONFIG 0x380
+#define MV64460_SRAM_TEST_MODE 0X3F4
+#define MV64460_SRAM_ERROR_CAUSE 0x388
+#define MV64460_SRAM_ERROR_ADDR 0x390
+#define MV64460_SRAM_ERROR_ADDR_HIGH 0X3F8
+#define MV64460_SRAM_ERROR_DATA_LOW 0x398
+#define MV64460_SRAM_ERROR_DATA_HIGH 0x3a0
+#define MV64460_SRAM_ERROR_DATA_PARITY 0x3a8
+
+/****************************************/
+/* SDRAM Configuration */
+/****************************************/
+
+#define MV64460_SDRAM_CONFIG 0x1400
+#define MV64460_D_UNIT_CONTROL_LOW 0x1404
+#define MV64460_D_UNIT_CONTROL_HIGH 0x1424
+#define MV64460_D_UNIT_MMASK 0x14B0
+#define MV64460_SDRAM_TIMING_CONTROL_LOW 0x1408
+#define MV64460_SDRAM_TIMING_CONTROL_HIGH 0x140c
+#define MV64460_SDRAM_ADDR_CONTROL 0x1410
+#define MV64460_SDRAM_OPEN_PAGES_CONTROL 0x1414
+#define MV64460_SDRAM_OPERATION 0x1418
+#define MV64460_SDRAM_MODE 0x141c
+#define MV64460_EXTENDED_DRAM_MODE 0x1420
+#define MV64460_SDRAM_CROSS_BAR_CONTROL_LOW 0x1430
+#define MV64460_SDRAM_CROSS_BAR_CONTROL_HIGH 0x1434
+#define MV64460_SDRAM_CROSS_BAR_TIMEOUT 0x1438
+#define MV64460_SDRAM_ADDR_CTRL_PADS_CALIBRATION 0x14c0
+#define MV64460_SDRAM_DATA_PADS_CALIBRATION 0x14c4
+
+/****************************************/
+/* SDRAM Error Report */
+/****************************************/
+
+#define MV64460_SDRAM_ERROR_DATA_LOW 0x1444
+#define MV64460_SDRAM_ERROR_DATA_HIGH 0x1440
+#define MV64460_SDRAM_ERROR_ADDR 0x1450
+#define MV64460_SDRAM_RECEIVED_ECC 0x1448
+#define MV64460_SDRAM_CALCULATED_ECC 0x144c
+#define MV64460_SDRAM_ECC_CONTROL 0x1454
+#define MV64460_SDRAM_ECC_ERROR_COUNTER 0x1458
+
+/******************************************/
+/* Controlled Delay Line (CDL) Registers */
+/******************************************/
+
+#define MV64460_DFCDL_CONFIG0 0x1480
+#define MV64460_DFCDL_CONFIG1 0x1484
+#define MV64460_DLL_WRITE 0x1488
+#define MV64460_DLL_READ 0x148c
+#define MV64460_SRAM_ADDR 0x1490
+#define MV64460_SRAM_DATA0 0x1494
+#define MV64460_SRAM_DATA1 0x1498
+#define MV64460_SRAM_DATA2 0x149c
+#define MV64460_DFCL_PROBE 0x14a0
+
+/******************************************/
+/* Debug Registers */
+/******************************************/
+
+#define MV64460_DUNIT_DEBUG_LOW 0x1460
+#define MV64460_DUNIT_DEBUG_HIGH 0x1464
+#define MV64460_DUNIT_MMASK 0X1b40
+
+/****************************************/
+/* Device Parameters */
+/****************************************/
+
+#define MV64460_DEVICE_BANK0_PARAMETERS 0x45c
+#define MV64460_DEVICE_BANK1_PARAMETERS 0x460
+#define MV64460_DEVICE_BANK2_PARAMETERS 0x464
+#define MV64460_DEVICE_BANK3_PARAMETERS 0x468
+#define MV64460_DEVICE_BOOT_BANK_PARAMETERS 0x46c
+#define MV64460_DEVICE_INTERFACE_CONTROL 0x4c0
+#define MV64460_DEVICE_INTERFACE_CROSS_BAR_CONTROL_LOW 0x4c8
+#define MV64460_DEVICE_INTERFACE_CROSS_BAR_CONTROL_HIGH 0x4cc
+#define MV64460_DEVICE_INTERFACE_CROSS_BAR_TIMEOUT 0x4c4
+
+/****************************************/
+/* Device interrupt registers */
+/****************************************/
+
+#define MV64460_DEVICE_INTERRUPT_CAUSE 0x4d0
+#define MV64460_DEVICE_INTERRUPT_MASK 0x4d4
+#define MV64460_DEVICE_ERROR_ADDR 0x4d8
+#define MV64460_DEVICE_ERROR_DATA 0x4dc
+#define MV64460_DEVICE_ERROR_PARITY 0x4e0
+
+/****************************************/
+/* Device debug registers */
+/****************************************/
+
+#define MV64460_DEVICE_DEBUG_LOW 0x4e4
+#define MV64460_DEVICE_DEBUG_HIGH 0x4e8
+#define MV64460_RUNIT_MMASK 0x4f0
+
+/****************************************/
+/* PCI Slave Address Decoding registers */
+/****************************************/
+
+#define MV64460_PCI_0_CS_0_BANK_SIZE 0xc08
+#define MV64460_PCI_1_CS_0_BANK_SIZE 0xc88
+#define MV64460_PCI_0_CS_1_BANK_SIZE 0xd08
+#define MV64460_PCI_1_CS_1_BANK_SIZE 0xd88
+#define MV64460_PCI_0_CS_2_BANK_SIZE 0xc0c
+#define MV64460_PCI_1_CS_2_BANK_SIZE 0xc8c
+#define MV64460_PCI_0_CS_3_BANK_SIZE 0xd0c
+#define MV64460_PCI_1_CS_3_BANK_SIZE 0xd8c
+#define MV64460_PCI_0_DEVCS_0_BANK_SIZE 0xc10
+#define MV64460_PCI_1_DEVCS_0_BANK_SIZE 0xc90
+#define MV64460_PCI_0_DEVCS_1_BANK_SIZE 0xd10
+#define MV64460_PCI_1_DEVCS_1_BANK_SIZE 0xd90
+#define MV64460_PCI_0_DEVCS_2_BANK_SIZE 0xd18
+#define MV64460_PCI_1_DEVCS_2_BANK_SIZE 0xd98
+#define MV64460_PCI_0_DEVCS_3_BANK_SIZE 0xc14
+#define MV64460_PCI_1_DEVCS_3_BANK_SIZE 0xc94
+#define MV64460_PCI_0_DEVCS_BOOT_BANK_SIZE 0xd14
+#define MV64460_PCI_1_DEVCS_BOOT_BANK_SIZE 0xd94
+#define MV64460_PCI_0_P2P_MEM0_BAR_SIZE 0xd1c
+#define MV64460_PCI_1_P2P_MEM0_BAR_SIZE 0xd9c
+#define MV64460_PCI_0_P2P_MEM1_BAR_SIZE 0xd20
+#define MV64460_PCI_1_P2P_MEM1_BAR_SIZE 0xda0
+#define MV64460_PCI_0_P2P_I_O_BAR_SIZE 0xd24
+#define MV64460_PCI_1_P2P_I_O_BAR_SIZE 0xda4
+#define MV64460_PCI_0_CPU_BAR_SIZE 0xd28
+#define MV64460_PCI_1_CPU_BAR_SIZE 0xda8
+#define MV64460_PCI_0_INTERNAL_SRAM_BAR_SIZE 0xe00
+#define MV64460_PCI_1_INTERNAL_SRAM_BAR_SIZE 0xe80
+#define MV64460_PCI_0_EXPANSION_ROM_BAR_SIZE 0xd2c
+#define MV64460_PCI_1_EXPANSION_ROM_BAR_SIZE 0xd9c
+#define MV64460_PCI_0_BASE_ADDR_REG_ENABLE 0xc3c
+#define MV64460_PCI_1_BASE_ADDR_REG_ENABLE 0xcbc
+#define MV64460_PCI_0_CS_0_BASE_ADDR_REMAP 0xc48
+#define MV64460_PCI_1_CS_0_BASE_ADDR_REMAP 0xcc8
+#define MV64460_PCI_0_CS_1_BASE_ADDR_REMAP 0xd48
+#define MV64460_PCI_1_CS_1_BASE_ADDR_REMAP 0xdc8
+#define MV64460_PCI_0_CS_2_BASE_ADDR_REMAP 0xc4c
+#define MV64460_PCI_1_CS_2_BASE_ADDR_REMAP 0xccc
+#define MV64460_PCI_0_CS_3_BASE_ADDR_REMAP 0xd4c
+#define MV64460_PCI_1_CS_3_BASE_ADDR_REMAP 0xdcc
+#define MV64460_PCI_0_CS_0_BASE_HIGH_ADDR_REMAP 0xF04
+#define MV64460_PCI_1_CS_0_BASE_HIGH_ADDR_REMAP 0xF84
+#define MV64460_PCI_0_CS_1_BASE_HIGH_ADDR_REMAP 0xF08
+#define MV64460_PCI_1_CS_1_BASE_HIGH_ADDR_REMAP 0xF88
+#define MV64460_PCI_0_CS_2_BASE_HIGH_ADDR_REMAP 0xF0C
+#define MV64460_PCI_1_CS_2_BASE_HIGH_ADDR_REMAP 0xF8C
+#define MV64460_PCI_0_CS_3_BASE_HIGH_ADDR_REMAP 0xF10
+#define MV64460_PCI_1_CS_3_BASE_HIGH_ADDR_REMAP 0xF90
+#define MV64460_PCI_0_DEVCS_0_BASE_ADDR_REMAP 0xc50
+#define MV64460_PCI_1_DEVCS_0_BASE_ADDR_REMAP 0xcd0
+#define MV64460_PCI_0_DEVCS_1_BASE_ADDR_REMAP 0xd50
+#define MV64460_PCI_1_DEVCS_1_BASE_ADDR_REMAP 0xdd0
+#define MV64460_PCI_0_DEVCS_2_BASE_ADDR_REMAP 0xd58
+#define MV64460_PCI_1_DEVCS_2_BASE_ADDR_REMAP 0xdd8
+#define MV64460_PCI_0_DEVCS_3_BASE_ADDR_REMAP 0xc54
+#define MV64460_PCI_1_DEVCS_3_BASE_ADDR_REMAP 0xcd4
+#define MV64460_PCI_0_DEVCS_BOOTCS_BASE_ADDR_REMAP 0xd54
+#define MV64460_PCI_1_DEVCS_BOOTCS_BASE_ADDR_REMAP 0xdd4
+#define MV64460_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_LOW 0xd5c
+#define MV64460_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_LOW 0xddc
+#define MV64460_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_HIGH 0xd60
+#define MV64460_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_HIGH 0xde0
+#define MV64460_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_LOW 0xd64
+#define MV64460_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_LOW 0xde4
+#define MV64460_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_HIGH 0xd68
+#define MV64460_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_HIGH 0xde8
+#define MV64460_PCI_0_P2P_I_O_BASE_ADDR_REMAP 0xd6c
+#define MV64460_PCI_1_P2P_I_O_BASE_ADDR_REMAP 0xdec
+#define MV64460_PCI_0_CPU_BASE_ADDR_REMAP_LOW 0xd70
+#define MV64460_PCI_1_CPU_BASE_ADDR_REMAP_LOW 0xdf0
+#define MV64460_PCI_0_CPU_BASE_ADDR_REMAP_HIGH 0xd74
+#define MV64460_PCI_1_CPU_BASE_ADDR_REMAP_HIGH 0xdf4
+#define MV64460_PCI_0_INTEGRATED_SRAM_BASE_ADDR_REMAP 0xf00
+#define MV64460_PCI_1_INTEGRATED_SRAM_BASE_ADDR_REMAP 0xf80
+#define MV64460_PCI_0_EXPANSION_ROM_BASE_ADDR_REMAP 0xf38
+#define MV64460_PCI_1_EXPANSION_ROM_BASE_ADDR_REMAP 0xfb8
+#define MV64460_PCI_0_ADDR_DECODE_CONTROL 0xd3c
+#define MV64460_PCI_1_ADDR_DECODE_CONTROL 0xdbc
+#define MV64460_PCI_0_HEADERS_RETARGET_CONTROL 0xF40
+#define MV64460_PCI_1_HEADERS_RETARGET_CONTROL 0xFc0
+#define MV64460_PCI_0_HEADERS_RETARGET_BASE 0xF44
+#define MV64460_PCI_1_HEADERS_RETARGET_BASE 0xFc4
+#define MV64460_PCI_0_HEADERS_RETARGET_HIGH 0xF48
+#define MV64460_PCI_1_HEADERS_RETARGET_HIGH 0xFc8
+
+/***********************************/
+/* PCI Control Register Map */
+/***********************************/
+
+#define MV64460_PCI_0_DLL_STATUS_AND_COMMAND 0x1d20
+#define MV64460_PCI_1_DLL_STATUS_AND_COMMAND 0x1da0
+#define MV64460_PCI_0_MPP_PADS_DRIVE_CONTROL 0x1d1C
+#define MV64460_PCI_1_MPP_PADS_DRIVE_CONTROL 0x1d9C
+#define MV64460_PCI_0_COMMAND 0xc00
+#define MV64460_PCI_1_COMMAND 0xc80
+#define MV64460_PCI_0_MODE 0xd00
+#define MV64460_PCI_1_MODE 0xd80
+#define MV64460_PCI_0_RETRY 0xc04
+#define MV64460_PCI_1_RETRY 0xc84
+#define MV64460_PCI_0_READ_BUFFER_DISCARD_TIMER 0xd04
+#define MV64460_PCI_1_READ_BUFFER_DISCARD_TIMER 0xd84
+#define MV64460_PCI_0_MSI_TRIGGER_TIMER 0xc38
+#define MV64460_PCI_1_MSI_TRIGGER_TIMER 0xcb8
+#define MV64460_PCI_0_ARBITER_CONTROL 0x1d00
+#define MV64460_PCI_1_ARBITER_CONTROL 0x1d80
+#define MV64460_PCI_0_CROSS_BAR_CONTROL_LOW 0x1d08
+#define MV64460_PCI_1_CROSS_BAR_CONTROL_LOW 0x1d88
+#define MV64460_PCI_0_CROSS_BAR_CONTROL_HIGH 0x1d0c
+#define MV64460_PCI_1_CROSS_BAR_CONTROL_HIGH 0x1d8c
+#define MV64460_PCI_0_CROSS_BAR_TIMEOUT 0x1d04
+#define MV64460_PCI_1_CROSS_BAR_TIMEOUT 0x1d84
+#define MV64460_PCI_0_SYNC_BARRIER_TRIGGER_REG 0x1D18
+#define MV64460_PCI_1_SYNC_BARRIER_TRIGGER_REG 0x1D98
+#define MV64460_PCI_0_SYNC_BARRIER_VIRTUAL_REG 0x1d10
+#define MV64460_PCI_1_SYNC_BARRIER_VIRTUAL_REG 0x1d90
+#define MV64460_PCI_0_P2P_CONFIG 0x1d14
+#define MV64460_PCI_1_P2P_CONFIG 0x1d94
+
+#define MV64460_PCI_0_ACCESS_CONTROL_BASE_0_LOW 0x1e00
+#define MV64460_PCI_0_ACCESS_CONTROL_BASE_0_HIGH 0x1e04
+#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_0 0x1e08
+#define MV64460_PCI_0_ACCESS_CONTROL_BASE_1_LOW 0x1e10
+#define MV64460_PCI_0_ACCESS_CONTROL_BASE_1_HIGH 0x1e14
+#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_1 0x1e18
+#define MV64460_PCI_0_ACCESS_CONTROL_BASE_2_LOW 0x1e20
+#define MV64460_PCI_0_ACCESS_CONTROL_BASE_2_HIGH 0x1e24
+#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_2 0x1e28
+#define MV64460_PCI_0_ACCESS_CONTROL_BASE_3_LOW 0x1e30
+#define MV64460_PCI_0_ACCESS_CONTROL_BASE_3_HIGH 0x1e34
+#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_3 0x1e38
+#define MV64460_PCI_0_ACCESS_CONTROL_BASE_4_LOW 0x1e40
+#define MV64460_PCI_0_ACCESS_CONTROL_BASE_4_HIGH 0x1e44
+#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_4 0x1e48
+#define MV64460_PCI_0_ACCESS_CONTROL_BASE_5_LOW 0x1e50
+#define MV64460_PCI_0_ACCESS_CONTROL_BASE_5_HIGH 0x1e54
+#define MV64460_PCI_0_ACCESS_CONTROL_SIZE_5 0x1e58
+
+#define MV64460_PCI_1_ACCESS_CONTROL_BASE_0_LOW 0x1e80
+#define MV64460_PCI_1_ACCESS_CONTROL_BASE_0_HIGH 0x1e84
+#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_0 0x1e88
+#define MV64460_PCI_1_ACCESS_CONTROL_BASE_1_LOW 0x1e90
+#define MV64460_PCI_1_ACCESS_CONTROL_BASE_1_HIGH 0x1e94
+#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_1 0x1e98
+#define MV64460_PCI_1_ACCESS_CONTROL_BASE_2_LOW 0x1ea0
+#define MV64460_PCI_1_ACCESS_CONTROL_BASE_2_HIGH 0x1ea4
+#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_2 0x1ea8
+#define MV64460_PCI_1_ACCESS_CONTROL_BASE_3_LOW 0x1eb0
+#define MV64460_PCI_1_ACCESS_CONTROL_BASE_3_HIGH 0x1eb4
+#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_3 0x1eb8
+#define MV64460_PCI_1_ACCESS_CONTROL_BASE_4_LOW 0x1ec0
+#define MV64460_PCI_1_ACCESS_CONTROL_BASE_4_HIGH 0x1ec4
+#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_4 0x1ec8
+#define MV64460_PCI_1_ACCESS_CONTROL_BASE_5_LOW 0x1ed0
+#define MV64460_PCI_1_ACCESS_CONTROL_BASE_5_HIGH 0x1ed4
+#define MV64460_PCI_1_ACCESS_CONTROL_SIZE_5 0x1ed8
+
+/****************************************/
+/* PCI Configuration Access Registers */
+/****************************************/
+
+#define MV64460_PCI_0_CONFIG_ADDR 0xcf8
+#define MV64460_PCI_0_CONFIG_DATA_VIRTUAL_REG 0xcfc
+#define MV64460_PCI_1_CONFIG_ADDR 0xc78
+#define MV64460_PCI_1_CONFIG_DATA_VIRTUAL_REG 0xc7c
+#define MV64460_PCI_0_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG 0xc34
+#define MV64460_PCI_1_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG 0xcb4
+
+/****************************************/
+/* PCI Error Report Registers */
+/****************************************/
+
+#define MV64460_PCI_0_SERR_MASK 0xc28
+#define MV64460_PCI_1_SERR_MASK 0xca8
+#define MV64460_PCI_0_ERROR_ADDR_LOW 0x1d40
+#define MV64460_PCI_1_ERROR_ADDR_LOW 0x1dc0
+#define MV64460_PCI_0_ERROR_ADDR_HIGH 0x1d44
+#define MV64460_PCI_1_ERROR_ADDR_HIGH 0x1dc4
+#define MV64460_PCI_0_ERROR_ATTRIBUTE 0x1d48
+#define MV64460_PCI_1_ERROR_ATTRIBUTE 0x1dc8
+#define MV64460_PCI_0_ERROR_COMMAND 0x1d50
+#define MV64460_PCI_1_ERROR_COMMAND 0x1dd0
+#define MV64460_PCI_0_ERROR_CAUSE 0x1d58
+#define MV64460_PCI_1_ERROR_CAUSE 0x1dd8
+#define MV64460_PCI_0_ERROR_MASK 0x1d5c
+#define MV64460_PCI_1_ERROR_MASK 0x1ddc
+
+/****************************************/
+/* PCI Debug Registers */
+/****************************************/
+
+#define MV64460_PCI_0_MMASK 0X1D24
+#define MV64460_PCI_1_MMASK 0X1DA4
+
+/*********************************************/
+/* PCI Configuration, Function 0, Registers */
+/*********************************************/
+
+#define MV64460_PCI_DEVICE_AND_VENDOR_ID 0x000
+#define MV64460_PCI_STATUS_AND_COMMAND 0x004
+#define MV64460_PCI_CLASS_CODE_AND_REVISION_ID 0x008
+#define MV64460_PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE 0x00C
+
+#define MV64460_PCI_SCS_0_BASE_ADDR_LOW 0x010
+#define MV64460_PCI_SCS_0_BASE_ADDR_HIGH 0x014
+#define MV64460_PCI_SCS_1_BASE_ADDR_LOW 0x018
+#define MV64460_PCI_SCS_1_BASE_ADDR_HIGH 0x01C
+#define MV64460_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_LOW 0x020
+#define MV64460_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_HIGH 0x024
+#define MV64460_PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID 0x02c
+#define MV64460_PCI_EXPANSION_ROM_BASE_ADDR_REG 0x030
+#define MV64460_PCI_CAPABILTY_LIST_POINTER 0x034
+#define MV64460_PCI_INTERRUPT_PIN_AND_LINE 0x03C
+ /* capability list */
+#define MV64460_PCI_POWER_MANAGEMENT_CAPABILITY 0x040
+#define MV64460_PCI_POWER_MANAGEMENT_STATUS_AND_CONTROL 0x044
+#define MV64460_PCI_VPD_ADDR 0x048
+#define MV64460_PCI_VPD_DATA 0x04c
+#define MV64460_PCI_MSI_MESSAGE_CONTROL 0x050
+#define MV64460_PCI_MSI_MESSAGE_ADDR 0x054
+#define MV64460_PCI_MSI_MESSAGE_UPPER_ADDR 0x058
+#define MV64460_PCI_MSI_MESSAGE_DATA 0x05c
+#define MV64460_PCI_X_COMMAND 0x060
+#define MV64460_PCI_X_STATUS 0x064
+#define MV64460_PCI_COMPACT_PCI_HOT_SWAP 0x068
+
+/***********************************************/
+/* PCI Configuration, Function 1, Registers */
+/***********************************************/
+
+#define MV64460_PCI_SCS_2_BASE_ADDR_LOW 0x110
+#define MV64460_PCI_SCS_2_BASE_ADDR_HIGH 0x114
+#define MV64460_PCI_SCS_3_BASE_ADDR_LOW 0x118
+#define MV64460_PCI_SCS_3_BASE_ADDR_HIGH 0x11c
+#define MV64460_PCI_INTERNAL_SRAM_BASE_ADDR_LOW 0x120
+#define MV64460_PCI_INTERNAL_SRAM_BASE_ADDR_HIGH 0x124
+
+/***********************************************/
+/* PCI Configuration, Function 2, Registers */
+/***********************************************/
+
+#define MV64460_PCI_DEVCS_0_BASE_ADDR_LOW 0x210
+#define MV64460_PCI_DEVCS_0_BASE_ADDR_HIGH 0x214
+#define MV64460_PCI_DEVCS_1_BASE_ADDR_LOW 0x218
+#define MV64460_PCI_DEVCS_1_BASE_ADDR_HIGH 0x21c
+#define MV64460_PCI_DEVCS_2_BASE_ADDR_LOW 0x220
+#define MV64460_PCI_DEVCS_2_BASE_ADDR_HIGH 0x224
+
+/***********************************************/
+/* PCI Configuration, Function 3, Registers */
+/***********************************************/
+
+#define MV64460_PCI_DEVCS_3_BASE_ADDR_LOW 0x310
+#define MV64460_PCI_DEVCS_3_BASE_ADDR_HIGH 0x314
+#define MV64460_PCI_BOOT_CS_BASE_ADDR_LOW 0x318
+#define MV64460_PCI_BOOT_CS_BASE_ADDR_HIGH 0x31c
+#define MV64460_PCI_CPU_BASE_ADDR_LOW 0x220
+#define MV64460_PCI_CPU_BASE_ADDR_HIGH 0x224
+
+/***********************************************/
+/* PCI Configuration, Function 4, Registers */
+/***********************************************/
+
+#define MV64460_PCI_P2P_MEM0_BASE_ADDR_LOW 0x410
+#define MV64460_PCI_P2P_MEM0_BASE_ADDR_HIGH 0x414
+#define MV64460_PCI_P2P_MEM1_BASE_ADDR_LOW 0x418
+#define MV64460_PCI_P2P_MEM1_BASE_ADDR_HIGH 0x41c
+#define MV64460_PCI_P2P_I_O_BASE_ADDR 0x420
+#define MV64460_PCI_INTERNAL_REGS_I_O_MAPPED_BASE_ADDR 0x424
+
+/****************************************/
+/* Messaging Unit Registers (I20) */
+/****************************************/
+
+#define MV64460_I2O_INBOUND_MESSAGE_REG0_PCI_0_SIDE 0x010
+#define MV64460_I2O_INBOUND_MESSAGE_REG1_PCI_0_SIDE 0x014
+#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_PCI_0_SIDE 0x018
+#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_PCI_0_SIDE 0x01C
+#define MV64460_I2O_INBOUND_DOORBELL_REG_PCI_0_SIDE 0x020
+#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE 0x024
+#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE 0x028
+#define MV64460_I2O_OUTBOUND_DOORBELL_REG_PCI_0_SIDE 0x02C
+#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE 0x030
+#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE 0x034
+#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE 0x040
+#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE 0x044
+#define MV64460_I2O_QUEUE_CONTROL_REG_PCI_0_SIDE 0x050
+#define MV64460_I2O_QUEUE_BASE_ADDR_REG_PCI_0_SIDE 0x054
+#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE 0x060
+#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE 0x064
+#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE 0x068
+#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE 0x06C
+#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE 0x070
+#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE 0x074
+#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE 0x0F8
+#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE 0x0FC
+
+#define MV64460_I2O_INBOUND_MESSAGE_REG0_PCI_1_SIDE 0x090
+#define MV64460_I2O_INBOUND_MESSAGE_REG1_PCI_1_SIDE 0x094
+#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_PCI_1_SIDE 0x098
+#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_PCI_1_SIDE 0x09C
+#define MV64460_I2O_INBOUND_DOORBELL_REG_PCI_1_SIDE 0x0A0
+#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE 0x0A4
+#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE 0x0A8
+#define MV64460_I2O_OUTBOUND_DOORBELL_REG_PCI_1_SIDE 0x0AC
+#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE 0x0B0
+#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE 0x0B4
+#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE 0x0C0
+#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE 0x0C4
+#define MV64460_I2O_QUEUE_CONTROL_REG_PCI_1_SIDE 0x0D0
+#define MV64460_I2O_QUEUE_BASE_ADDR_REG_PCI_1_SIDE 0x0D4
+#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE 0x0E0
+#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE 0x0E4
+#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE 0x0E8
+#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE 0x0EC
+#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE 0x0F0
+#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE 0x0F4
+#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE 0x078
+#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE 0x07C
+
+#define MV64460_I2O_INBOUND_MESSAGE_REG0_CPU0_SIDE 0x1C10
+#define MV64460_I2O_INBOUND_MESSAGE_REG1_CPU0_SIDE 0x1C14
+#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_CPU0_SIDE 0x1C18
+#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_CPU0_SIDE 0x1C1C
+#define MV64460_I2O_INBOUND_DOORBELL_REG_CPU0_SIDE 0x1C20
+#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE 0x1C24
+#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_CPU0_SIDE 0x1C28
+#define MV64460_I2O_OUTBOUND_DOORBELL_REG_CPU0_SIDE 0x1C2C
+#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE 0x1C30
+#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU0_SIDE 0x1C34
+#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE 0x1C40
+#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE 0x1C44
+#define MV64460_I2O_QUEUE_CONTROL_REG_CPU0_SIDE 0x1C50
+#define MV64460_I2O_QUEUE_BASE_ADDR_REG_CPU0_SIDE 0x1C54
+#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE 0x1C60
+#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE 0x1C64
+#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE 0x1C68
+#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE 0x1C6C
+#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE 0x1C70
+#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE 0x1C74
+#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE 0x1CF8
+#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE 0x1CFC
+#define MV64460_I2O_INBOUND_MESSAGE_REG0_CPU1_SIDE 0x1C90
+#define MV64460_I2O_INBOUND_MESSAGE_REG1_CPU1_SIDE 0x1C94
+#define MV64460_I2O_OUTBOUND_MESSAGE_REG0_CPU1_SIDE 0x1C98
+#define MV64460_I2O_OUTBOUND_MESSAGE_REG1_CPU1_SIDE 0x1C9C
+#define MV64460_I2O_INBOUND_DOORBELL_REG_CPU1_SIDE 0x1CA0
+#define MV64460_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE 0x1CA4
+#define MV64460_I2O_INBOUND_INTERRUPT_MASK_REG_CPU1_SIDE 0x1CA8
+#define MV64460_I2O_OUTBOUND_DOORBELL_REG_CPU1_SIDE 0x1CAC
+#define MV64460_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE 0x1CB0
+#define MV64460_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU1_SIDE 0x1CB4
+#define MV64460_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE 0x1CC0
+#define MV64460_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE 0x1CC4
+#define MV64460_I2O_QUEUE_CONTROL_REG_CPU1_SIDE 0x1CD0
+#define MV64460_I2O_QUEUE_BASE_ADDR_REG_CPU1_SIDE 0x1CD4
+#define MV64460_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE 0x1CE0
+#define MV64460_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE 0x1CE4
+#define MV64460_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE 0x1CE8
+#define MV64460_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE 0x1CEC
+#define MV64460_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE 0x1CF0
+#define MV64460_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE 0x1CF4
+#define MV64460_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE 0x1C78
+#define MV64460_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE 0x1C7C
+
+/****************************************/
+/* Ethernet Unit Registers */
+/****************************************/
+
+#define MV64460_ETH_PHY_ADDR_REG 0x2000
+#define MV64460_ETH_SMI_REG 0x2004
+#define MV64460_ETH_UNIT_DEFAULT_ADDR_REG 0x2008
+#define MV64460_ETH_UNIT_DEFAULTID_REG 0x200c
+#define MV64460_ETH_UNIT_INTERRUPT_CAUSE_REG 0x2080
+#define MV64460_ETH_UNIT_INTERRUPT_MASK_REG 0x2084
+#define MV64460_ETH_UNIT_INTERNAL_USE_REG 0x24fc
+#define MV64460_ETH_UNIT_ERROR_ADDR_REG 0x2094
+#define MV64460_ETH_BAR_0 0x2200
+#define MV64460_ETH_BAR_1 0x2208
+#define MV64460_ETH_BAR_2 0x2210
+#define MV64460_ETH_BAR_3 0x2218
+#define MV64460_ETH_BAR_4 0x2220
+#define MV64460_ETH_BAR_5 0x2228
+#define MV64460_ETH_SIZE_REG_0 0x2204
+#define MV64460_ETH_SIZE_REG_1 0x220c
+#define MV64460_ETH_SIZE_REG_2 0x2214
+#define MV64460_ETH_SIZE_REG_3 0x221c
+#define MV64460_ETH_SIZE_REG_4 0x2224
+#define MV64460_ETH_SIZE_REG_5 0x222c
+#define MV64460_ETH_HEADERS_RETARGET_BASE_REG 0x2230
+#define MV64460_ETH_HEADERS_RETARGET_CONTROL_REG 0x2234
+#define MV64460_ETH_HIGH_ADDR_REMAP_REG_0 0x2280
+#define MV64460_ETH_HIGH_ADDR_REMAP_REG_1 0x2284
+#define MV64460_ETH_HIGH_ADDR_REMAP_REG_2 0x2288
+#define MV64460_ETH_HIGH_ADDR_REMAP_REG_3 0x228c
+#define MV64460_ETH_BASE_ADDR_ENABLE_REG 0x2290
+#define MV64460_ETH_ACCESS_PROTECTION_REG(port) (0x2294 + (port<<2))
+#define MV64460_ETH_MIB_COUNTERS_BASE(port) (0x3000 + (port<<7))
+#define MV64460_ETH_PORT_CONFIG_REG(port) (0x2400 + (port<<10))
+#define MV64460_ETH_PORT_CONFIG_EXTEND_REG(port) (0x2404 + (port<<10))
+#define MV64460_ETH_MII_SERIAL_PARAMETRS_REG(port) (0x2408 + (port<<10))
+#define MV64460_ETH_GMII_SERIAL_PARAMETRS_REG(port) (0x240c + (port<<10))
+#define MV64460_ETH_VLAN_ETHERTYPE_REG(port) (0x2410 + (port<<10))
+#define MV64460_ETH_MAC_ADDR_LOW(port) (0x2414 + (port<<10))
+#define MV64460_ETH_MAC_ADDR_HIGH(port) (0x2418 + (port<<10))
+#define MV64460_ETH_SDMA_CONFIG_REG(port) (0x241c + (port<<10))
+#define MV64460_ETH_DSCP_0(port) (0x2420 + (port<<10))
+#define MV64460_ETH_DSCP_1(port) (0x2424 + (port<<10))
+#define MV64460_ETH_DSCP_2(port) (0x2428 + (port<<10))
+#define MV64460_ETH_DSCP_3(port) (0x242c + (port<<10))
+#define MV64460_ETH_DSCP_4(port) (0x2430 + (port<<10))
+#define MV64460_ETH_DSCP_5(port) (0x2434 + (port<<10))
+#define MV64460_ETH_DSCP_6(port) (0x2438 + (port<<10))
+#define MV64460_ETH_PORT_SERIAL_CONTROL_REG(port) (0x243c + (port<<10))
+#define MV64460_ETH_VLAN_PRIORITY_TAG_TO_PRIORITY(port) (0x2440 + (port<<10))
+#define MV64460_ETH_PORT_STATUS_REG(port) (0x2444 + (port<<10))
+#define MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(port) (0x2448 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_FIXED_PRIORITY(port) (0x244c + (port<<10))
+#define MV64460_ETH_PORT_TX_TOKEN_BUCKET_RATE_CONFIG(port) (0x2450 + (port<<10))
+#define MV64460_ETH_MAXIMUM_TRANSMIT_UNIT(port) (0x2458 + (port<<10))
+#define MV64460_ETH_PORT_MAXIMUM_TOKEN_BUCKET_SIZE(port) (0x245c + (port<<10))
+#define MV64460_ETH_INTERRUPT_CAUSE_REG(port) (0x2460 + (port<<10))
+#define MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG(port) (0x2464 + (port<<10))
+#define MV64460_ETH_INTERRUPT_MASK_REG(port) (0x2468 + (port<<10))
+#define MV64460_ETH_INTERRUPT_EXTEND_MASK_REG(port) (0x246c + (port<<10))
+#define MV64460_ETH_RX_FIFO_URGENT_THRESHOLD_REG(port) (0x2470 + (port<<10))
+#define MV64460_ETH_TX_FIFO_URGENT_THRESHOLD_REG(port) (0x2474 + (port<<10))
+#define MV64460_ETH_RX_MINIMAL_FRAME_SIZE_REG(port) (0x247c + (port<<10))
+#define MV64460_ETH_RX_DISCARDED_FRAMES_COUNTER(port) (0x2484 + (port<<10)
+#define MV64460_ETH_PORT_DEBUG_0_REG(port) (0x248c + (port<<10))
+#define MV64460_ETH_PORT_DEBUG_1_REG(port) (0x2490 + (port<<10))
+#define MV64460_ETH_PORT_INTERNAL_ADDR_ERROR_REG(port) (0x2494 + (port<<10))
+#define MV64460_ETH_INTERNAL_USE_REG(port) (0x24fc + (port<<10))
+#define MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(port) (0x2680 + (port<<10))
+#define MV64460_ETH_CURRENT_SERVED_TX_DESC_PTR(port) (0x2684 + (port<<10))
+#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_0(port) (0x260c + (port<<10))
+#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_1(port) (0x261c + (port<<10))
+#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_2(port) (0x262c + (port<<10))
+#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_3(port) (0x263c + (port<<10))
+#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_4(port) (0x264c + (port<<10))
+#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_5(port) (0x265c + (port<<10))
+#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_6(port) (0x266c + (port<<10))
+#define MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_7(port) (0x267c + (port<<10))
+#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_0(port) (0x26c0 + (port<<10))
+#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_1(port) (0x26c4 + (port<<10))
+#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_2(port) (0x26c8 + (port<<10))
+#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_3(port) (0x26cc + (port<<10))
+#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_4(port) (0x26d0 + (port<<10))
+#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_5(port) (0x26d4 + (port<<10))
+#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_6(port) (0x26d8 + (port<<10))
+#define MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_7(port) (0x26dc + (port<<10))
+#define MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT(port) (0x2700 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_1_TOKEN_BUCKET_COUNT(port) (0x2710 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_2_TOKEN_BUCKET_COUNT(port) (0x2720 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_3_TOKEN_BUCKET_COUNT(port) (0x2730 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_4_TOKEN_BUCKET_COUNT(port) (0x2740 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_5_TOKEN_BUCKET_COUNT(port) (0x2750 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_6_TOKEN_BUCKET_COUNT(port) (0x2760 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_7_TOKEN_BUCKET_COUNT(port) (0x2770 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG(port) (0x2704 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_1_TOKEN_BUCKET_CONFIG(port) (0x2714 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_2_TOKEN_BUCKET_CONFIG(port) (0x2724 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_3_TOKEN_BUCKET_CONFIG(port) (0x2734 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_4_TOKEN_BUCKET_CONFIG(port) (0x2744 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_5_TOKEN_BUCKET_CONFIG(port) (0x2754 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_6_TOKEN_BUCKET_CONFIG(port) (0x2764 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_7_TOKEN_BUCKET_CONFIG(port) (0x2774 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_0_ARBITER_CONFIG(port) (0x2708 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_1_ARBITER_CONFIG(port) (0x2718 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_2_ARBITER_CONFIG(port) (0x2728 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_3_ARBITER_CONFIG(port) (0x2738 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_4_ARBITER_CONFIG(port) (0x2748 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_5_ARBITER_CONFIG(port) (0x2758 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_6_ARBITER_CONFIG(port) (0x2768 + (port<<10))
+#define MV64460_ETH_TX_QUEUE_7_ARBITER_CONFIG(port) (0x2778 + (port<<10))
+#define MV64460_ETH_PORT_TX_TOKEN_BUCKET_COUNT(port) (0x2780 + (port<<10))
+#define MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(port) (0x3400 + (port<<10))
+#define MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE(port) (0x3500 + (port<<10))
+#define MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE(port) (0x3600 + (port<<10))
+
+/*******************************************/
+/* CUNIT Registers */
+/*******************************************/
+
+ /* Address Decoding Register Map */
+
+#define MV64460_CUNIT_BASE_ADDR_REG0 0xf200
+#define MV64460_CUNIT_BASE_ADDR_REG1 0xf208
+#define MV64460_CUNIT_BASE_ADDR_REG2 0xf210
+#define MV64460_CUNIT_BASE_ADDR_REG3 0xf218
+#define MV64460_CUNIT_SIZE0 0xf204
+#define MV64460_CUNIT_SIZE1 0xf20c
+#define MV64460_CUNIT_SIZE2 0xf214
+#define MV64460_CUNIT_SIZE3 0xf21c
+#define MV64460_CUNIT_HIGH_ADDR_REMAP_REG0 0xf240
+#define MV64460_CUNIT_HIGH_ADDR_REMAP_REG1 0xf244
+#define MV64460_CUNIT_BASE_ADDR_ENABLE_REG 0xf250
+#define MV64460_MPSC0_ACCESS_PROTECTION_REG 0xf254
+#define MV64460_MPSC1_ACCESS_PROTECTION_REG 0xf258
+#define MV64460_CUNIT_INTERNAL_SPACE_BASE_ADDR_REG 0xf25C
+
+ /* Error Report Registers */
+
+#define MV64460_CUNIT_INTERRUPT_CAUSE_REG 0xf310
+#define MV64460_CUNIT_INTERRUPT_MASK_REG 0xf314
+#define MV64460_CUNIT_ERROR_ADDR 0xf318
+
+ /* Cunit Control Registers */
+
+#define MV64460_CUNIT_ARBITER_CONTROL_REG 0xf300
+#define MV64460_CUNIT_CONFIG_REG 0xb40c
+#define MV64460_CUNIT_CRROSBAR_TIMEOUT_REG 0xf304
+
+ /* Cunit Debug Registers */
+
+#define MV64460_CUNIT_DEBUG_LOW 0xf340
+#define MV64460_CUNIT_DEBUG_HIGH 0xf344
+#define MV64460_CUNIT_MMASK 0xf380
+
+ /* Cunit Base Address Enable Window Bits*/
+#define MV64460_CUNIT_BASE_ADDR_WIN_0_BIT 0x0
+#define MV64460_CUNIT_BASE_ADDR_WIN_1_BIT 0x1
+#define MV64460_CUNIT_BASE_ADDR_WIN_2_BIT 0x2
+#define MV64460_CUNIT_BASE_ADDR_WIN_3_BIT 0x3
+
+ /* MPSCs Clocks Routing Registers */
+
+#define MV64460_MPSC_ROUTING_REG 0xb400
+#define MV64460_MPSC_RX_CLOCK_ROUTING_REG 0xb404
+#define MV64460_MPSC_TX_CLOCK_ROUTING_REG 0xb408
+
+ /* MPSCs Interrupts Registers */
+
+#define MV64460_MPSC_CAUSE_REG(port) (0xb804 + (port<<3))
+#define MV64460_MPSC_MASK_REG(port) (0xb884 + (port<<3))
+
+#define MV64460_MPSC_MAIN_CONFIG_LOW(port) (0x8000 + (port<<12))
+#define MV64460_MPSC_MAIN_CONFIG_HIGH(port) (0x8004 + (port<<12))
+#define MV64460_MPSC_PROTOCOL_CONFIG(port) (0x8008 + (port<<12))
+#define MV64460_MPSC_CHANNEL_REG1(port) (0x800c + (port<<12))
+#define MV64460_MPSC_CHANNEL_REG2(port) (0x8010 + (port<<12))
+#define MV64460_MPSC_CHANNEL_REG3(port) (0x8014 + (port<<12))
+#define MV64460_MPSC_CHANNEL_REG4(port) (0x8018 + (port<<12))
+#define MV64460_MPSC_CHANNEL_REG5(port) (0x801c + (port<<12))
+#define MV64460_MPSC_CHANNEL_REG6(port) (0x8020 + (port<<12))
+#define MV64460_MPSC_CHANNEL_REG7(port) (0x8024 + (port<<12))
+#define MV64460_MPSC_CHANNEL_REG8(port) (0x8028 + (port<<12))
+#define MV64460_MPSC_CHANNEL_REG9(port) (0x802c + (port<<12))
+#define MV64460_MPSC_CHANNEL_REG10(port) (0x8030 + (port<<12))
+
+ /* MPSC0 Registers */
+
+
+/***************************************/
+/* SDMA Registers */
+/***************************************/
+
+#define MV64460_SDMA_CONFIG_REG(channel) (0x4000 + (channel<<13))
+#define MV64460_SDMA_COMMAND_REG(channel) (0x4008 + (channel<<13))
+#define MV64460_SDMA_CURRENT_RX_DESCRIPTOR_POINTER(channel) (0x4810 + (channel<<13))
+#define MV64460_SDMA_CURRENT_TX_DESCRIPTOR_POINTER(channel) (0x4c10 + (channel<<13))
+#define MV64460_SDMA_FIRST_TX_DESCRIPTOR_POINTER(channel) (0x4c14 + (channel<<13))
+
+#define MV64460_SDMA_CAUSE_REG 0xb800
+#define MV64460_SDMA_MASK_REG 0xb880
+
+
+/****************************************/
+/* SDMA Address Space Targets */
+/****************************************/
+
+#define MV64460_SDMA_DRAM_CS_0_TARGET 0x0e00
+#define MV64460_SDMA_DRAM_CS_1_TARGET 0x0d00
+#define MV64460_SDMA_DRAM_CS_2_TARGET 0x0b00
+#define MV64460_SDMA_DRAM_CS_3_TARGET 0x0700
+
+#define MV64460_SDMA_DEV_CS_0_TARGET 0x1e01
+#define MV64460_SDMA_DEV_CS_1_TARGET 0x1d01
+#define MV64460_SDMA_DEV_CS_2_TARGET 0x1b01
+#define MV64460_SDMA_DEV_CS_3_TARGET 0x1701
+
+#define MV64460_SDMA_BOOT_CS_TARGET 0x0f00
+
+#define MV64460_SDMA_SRAM_TARGET 0x0003
+#define MV64460_SDMA_60X_BUS_TARGET 0x4003
+
+#define MV64460_PCI_0_TARGET 0x0003
+#define MV64460_PCI_1_TARGET 0x0004
+
+
+/* Devices BAR and size registers */
+
+#define MV64460_DEV_CS0_BASE_ADDR 0x028
+#define MV64460_DEV_CS0_SIZE 0x030
+#define MV64460_DEV_CS1_BASE_ADDR 0x228
+#define MV64460_DEV_CS1_SIZE 0x230
+#define MV64460_DEV_CS2_BASE_ADDR 0x248
+#define MV64460_DEV_CS2_SIZE 0x250
+#define MV64460_DEV_CS3_BASE_ADDR 0x038
+#define MV64460_DEV_CS3_SIZE 0x040
+#define MV64460_BOOTCS_BASE_ADDR 0x238
+#define MV64460_BOOTCS_SIZE 0x240
+
+/* SDMA Window access protection */
+#define MV64460_SDMA_WIN_ACCESS_NOT_ALLOWED 0
+#define MV64460_SDMA_WIN_ACCESS_READ_ONLY 1
+#define MV64460_SDMA_WIN_ACCESS_FULL 2
+
+/* BRG Interrupts */
+
+#define MV64460_BRG_CONFIG_REG(brg) (0xb200 + (brg<<3))
+#define MV64460_BRG_BAUDE_TUNING_REG(brg) (0xb204 + (brg<<3))
+#define MV64460_BRG_CAUSE_REG 0xb834
+#define MV64460_BRG_MASK_REG 0xb8b4
+
+/****************************************/
+/* DMA Channel Control */
+/****************************************/
+
+#define MV64460_DMA_CHANNEL0_CONTROL 0x840
+#define MV64460_DMA_CHANNEL0_CONTROL_HIGH 0x880
+#define MV64460_DMA_CHANNEL1_CONTROL 0x844
+#define MV64460_DMA_CHANNEL1_CONTROL_HIGH 0x884
+#define MV64460_DMA_CHANNEL2_CONTROL 0x848
+#define MV64460_DMA_CHANNEL2_CONTROL_HIGH 0x888
+#define MV64460_DMA_CHANNEL3_CONTROL 0x84C
+#define MV64460_DMA_CHANNEL3_CONTROL_HIGH 0x88C
+
+
+/****************************************/
+/* IDMA Registers */
+/****************************************/
+
+#define MV64460_DMA_CHANNEL0_BYTE_COUNT 0x800
+#define MV64460_DMA_CHANNEL1_BYTE_COUNT 0x804
+#define MV64460_DMA_CHANNEL2_BYTE_COUNT 0x808
+#define MV64460_DMA_CHANNEL3_BYTE_COUNT 0x80C
+#define MV64460_DMA_CHANNEL0_SOURCE_ADDR 0x810
+#define MV64460_DMA_CHANNEL1_SOURCE_ADDR 0x814
+#define MV64460_DMA_CHANNEL2_SOURCE_ADDR 0x818
+#define MV64460_DMA_CHANNEL3_SOURCE_ADDR 0x81c
+#define MV64460_DMA_CHANNEL0_DESTINATION_ADDR 0x820
+#define MV64460_DMA_CHANNEL1_DESTINATION_ADDR 0x824
+#define MV64460_DMA_CHANNEL2_DESTINATION_ADDR 0x828
+#define MV64460_DMA_CHANNEL3_DESTINATION_ADDR 0x82C
+#define MV64460_DMA_CHANNEL0_NEXT_DESCRIPTOR_POINTER 0x830
+#define MV64460_DMA_CHANNEL1_NEXT_DESCRIPTOR_POINTER 0x834
+#define MV64460_DMA_CHANNEL2_NEXT_DESCRIPTOR_POINTER 0x838
+#define MV64460_DMA_CHANNEL3_NEXT_DESCRIPTOR_POINTER 0x83C
+#define MV64460_DMA_CHANNEL0_CURRENT_DESCRIPTOR_POINTER 0x870
+#define MV64460_DMA_CHANNEL1_CURRENT_DESCRIPTOR_POINTER 0x874
+#define MV64460_DMA_CHANNEL2_CURRENT_DESCRIPTOR_POINTER 0x878
+#define MV64460_DMA_CHANNEL3_CURRENT_DESCRIPTOR_POINTER 0x87C
+
+ /* IDMA Address Decoding Base Address Registers */
+
+#define MV64460_DMA_BASE_ADDR_REG0 0xa00
+#define MV64460_DMA_BASE_ADDR_REG1 0xa08
+#define MV64460_DMA_BASE_ADDR_REG2 0xa10
+#define MV64460_DMA_BASE_ADDR_REG3 0xa18
+#define MV64460_DMA_BASE_ADDR_REG4 0xa20
+#define MV64460_DMA_BASE_ADDR_REG5 0xa28
+#define MV64460_DMA_BASE_ADDR_REG6 0xa30
+#define MV64460_DMA_BASE_ADDR_REG7 0xa38
+
+ /* IDMA Address Decoding Size Address Register */
+
+#define MV64460_DMA_SIZE_REG0 0xa04
+#define MV64460_DMA_SIZE_REG1 0xa0c
+#define MV64460_DMA_SIZE_REG2 0xa14
+#define MV64460_DMA_SIZE_REG3 0xa1c
+#define MV64460_DMA_SIZE_REG4 0xa24
+#define MV64460_DMA_SIZE_REG5 0xa2c
+#define MV64460_DMA_SIZE_REG6 0xa34
+#define MV64460_DMA_SIZE_REG7 0xa3C
+
+ /* IDMA Address Decoding High Address Remap and Access
+ Protection Registers */
+
+#define MV64460_DMA_HIGH_ADDR_REMAP_REG0 0xa60
+#define MV64460_DMA_HIGH_ADDR_REMAP_REG1 0xa64
+#define MV64460_DMA_HIGH_ADDR_REMAP_REG2 0xa68
+#define MV64460_DMA_HIGH_ADDR_REMAP_REG3 0xa6C
+#define MV64460_DMA_BASE_ADDR_ENABLE_REG 0xa80
+#define MV64460_DMA_CHANNEL0_ACCESS_PROTECTION_REG 0xa70
+#define MV64460_DMA_CHANNEL1_ACCESS_PROTECTION_REG 0xa74
+#define MV64460_DMA_CHANNEL2_ACCESS_PROTECTION_REG 0xa78
+#define MV64460_DMA_CHANNEL3_ACCESS_PROTECTION_REG 0xa7c
+#define MV64460_DMA_ARBITER_CONTROL 0x860
+#define MV64460_DMA_CROSS_BAR_TIMEOUT 0x8d0
+
+ /* IDMA Headers Retarget Registers */
+
+#define MV64460_DMA_HEADERS_RETARGET_CONTROL 0xa84
+#define MV64460_DMA_HEADERS_RETARGET_BASE 0xa88
+
+ /* IDMA Interrupt Register */
+
+#define MV64460_DMA_INTERRUPT_CAUSE_REG 0x8c0
+#define MV64460_DMA_INTERRUPT_CAUSE_MASK 0x8c4
+#define MV64460_DMA_ERROR_ADDR 0x8c8
+#define MV64460_DMA_ERROR_SELECT 0x8cc
+
+ /* IDMA Debug Register ( for internal use ) */
+
+#define MV64460_DMA_DEBUG_LOW 0x8e0
+#define MV64460_DMA_DEBUG_HIGH 0x8e4
+#define MV64460_DMA_SPARE 0xA8C
+
+/****************************************/
+/* Timer_Counter */
+/****************************************/
+
+#define MV64460_TIMER_COUNTER0 0x850
+#define MV64460_TIMER_COUNTER1 0x854
+#define MV64460_TIMER_COUNTER2 0x858
+#define MV64460_TIMER_COUNTER3 0x85C
+#define MV64460_TIMER_COUNTER_0_3_CONTROL 0x864
+#define MV64460_TIMER_COUNTER_0_3_INTERRUPT_CAUSE 0x868
+#define MV64460_TIMER_COUNTER_0_3_INTERRUPT_MASK 0x86c
+
+/****************************************/
+/* Watchdog registers */
+/****************************************/
+
+#define MV64460_WATCHDOG_CONFIG_REG 0xb410
+#define MV64460_WATCHDOG_VALUE_REG 0xb414
+
+/****************************************/
+/* I2C Registers */
+/****************************************/
+
+#define MV64460_I2C_SLAVE_ADDR 0xc000
+#define MV64460_I2C_EXTENDED_SLAVE_ADDR 0xc010
+#define MV64460_I2C_DATA 0xc004
+#define MV64460_I2C_CONTROL 0xc008
+#define MV64460_I2C_STATUS_BAUDE_RATE 0xc00C
+#define MV64460_I2C_SOFT_RESET 0xc01c
+
+/****************************************/
+/* GPP Interface Registers */
+/****************************************/
+
+#define MV64460_GPP_IO_CONTROL 0xf100
+#define MV64460_GPP_LEVEL_CONTROL 0xf110
+#define MV64460_GPP_VALUE 0xf104
+#define MV64460_GPP_INTERRUPT_CAUSE 0xf108
+#define MV64460_GPP_INTERRUPT_MASK0 0xf10c
+#define MV64460_GPP_INTERRUPT_MASK1 0xf114
+#define MV64460_GPP_VALUE_SET 0xf118
+#define MV64460_GPP_VALUE_CLEAR 0xf11c
+
+/****************************************/
+/* Interrupt Controller Registers */
+/****************************************/
+
+/****************************************/
+/* Interrupts */
+/****************************************/
+
+#define MV64460_MAIN_INTERRUPT_CAUSE_LOW 0x004
+#define MV64460_MAIN_INTERRUPT_CAUSE_HIGH 0x00c
+#define MV64460_CPU_INTERRUPT0_MASK_LOW 0x014
+#define MV64460_CPU_INTERRUPT0_MASK_HIGH 0x01c
+#define MV64460_CPU_INTERRUPT0_SELECT_CAUSE 0x024
+#define MV64460_CPU_INTERRUPT1_MASK_LOW 0x034
+#define MV64460_CPU_INTERRUPT1_MASK_HIGH 0x03c
+#define MV64460_CPU_INTERRUPT1_SELECT_CAUSE 0x044
+#define MV64460_INTERRUPT0_MASK_0_LOW 0x054
+#define MV64460_INTERRUPT0_MASK_0_HIGH 0x05c
+#define MV64460_INTERRUPT0_SELECT_CAUSE 0x064
+#define MV64460_INTERRUPT1_MASK_0_LOW 0x074
+#define MV64460_INTERRUPT1_MASK_0_HIGH 0x07c
+#define MV64460_INTERRUPT1_SELECT_CAUSE 0x084
+
+/****************************************/
+/* MPP Interface Registers */
+/****************************************/
+
+#define MV64460_MPP_CONTROL0 0xf000
+#define MV64460_MPP_CONTROL1 0xf004
+#define MV64460_MPP_CONTROL2 0xf008
+#define MV64460_MPP_CONTROL3 0xf00c
+
+/****************************************/
+/* Serial Initialization registers */
+/****************************************/
+
+#define MV64460_SERIAL_INIT_LAST_DATA 0xf324
+#define MV64460_SERIAL_INIT_CONTROL 0xf328
+#define MV64460_SERIAL_INIT_STATUS 0xf32c
+
+
+#endif /* __INCgt64460rh */
diff --git a/board/prodrive/p3mx/p3mx.c b/board/prodrive/p3mx/p3mx.c
new file mode 100644
index 0000000..6cebd1a
--- /dev/null
+++ b/board/prodrive/p3mx/p3mx.c
@@ -0,0 +1,809 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Based on original work by
+ * Roel Loeffen, (C) Copyright 2006 Prodrive B.V.
+ * Josh Huber, (C) Copyright 2001 Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * modifications for the DB64360 eval board based by Ingo.Assmus@keymile.com
+ * modifications for the cpci750 by reinhard.arlt@esd-electronics.com
+ * modifications for the P3M750 by roel.loeffen@prodrive.nl
+ */
+
+/*
+ * p3m750.c - main board support/init for the Prodrive p3m750/p3m7448.
+ */
+
+#include <common.h>
+#include <74xx_7xx.h>
+#include "../../Marvell/include/memory.h"
+#include "../../Marvell/include/pci.h"
+#include "../../Marvell/include/mv_gen_reg.h"
+#include <net.h>
+#include <i2c.h>
+
+#include "eth.h"
+#include "mpsc.h"
+#include "64460.h"
+#include "mv_regs.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#undef DEBUG
+/*#define DEBUG */
+
+#ifdef CONFIG_PCI
+#define MAP_PCI
+#endif /* of CONFIG_PCI */
+
+#ifdef DEBUG
+#define DP(x) x
+#else
+#define DP(x)
+#endif
+
+extern void flush_data_cache (void);
+extern void invalidate_l1_instruction_cache (void);
+extern flash_info_t flash_info[];
+
+/* ------------------------------------------------------------------------- */
+
+/* this is the current GT register space location */
+/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */
+
+/* Unfortunately, we cant change it while we are in flash, so we initialize it
+ * to the "final" value. This means that any debug_led calls before
+ * board_early_init_f wont work right (like in cpu_init_f).
+ * See also my_remap_gt_regs below. (NTL)
+ */
+
+void board_prebootm_init (void);
+unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS;
+int display_mem_map (void);
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * This is a version of the GT register space remapping function that
+ * doesn't touch globals (meaning, it's ok to run from flash.)
+ *
+ * Unfortunately, this has the side effect that a writable
+ * INTERNAL_REG_BASE_ADDR is impossible. Oh well.
+ */
+
+void my_remap_gt_regs (u32 cur_loc, u32 new_loc)
+{
+ u32 temp;
+
+ /* check and see if it's already moved */
+ temp = in_le32 ((u32 *) (new_loc + INTERNAL_SPACE_DECODE));
+ if ((temp & 0xffff) == new_loc >> 16)
+ return;
+
+ temp = (in_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE)) &
+ 0xffff0000) | (new_loc >> 16);
+
+ out_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE), temp);
+
+ while (GTREGREAD (INTERNAL_SPACE_DECODE) != temp);
+}
+
+#ifdef CONFIG_PCI
+
+static void gt_pci_config (void)
+{
+ unsigned int stat;
+ unsigned int val = 0x00fff864; /* DINK32: BusNum 23:16, DevNum 15:11, */
+ /* FuncNum 10:8, RegNum 7:2 */
+
+ /*
+ * In PCIX mode devices provide their own bus and device numbers.
+ * We query the Discovery II's
+ * config registers by writing ones to the bus and device.
+ * We then update the Virtual register with the correct value for the
+ * bus and device.
+ */
+ if ((GTREGREAD (PCI_0_MODE) & (BIT4 | BIT5)) != 0) { /* if PCI-X */
+ GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
+
+ GT_REG_READ (PCI_0_CONFIG_DATA_VIRTUAL_REG, &stat);
+
+ GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
+ GT_REG_WRITE (PCI_0_CONFIG_DATA_VIRTUAL_REG,
+ (stat & 0xffff0000) | CFG_PCI_IDSEL);
+
+ }
+ if ((GTREGREAD (PCI_1_MODE) & (BIT4 | BIT5)) != 0) { /* if PCI-X */
+ GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
+ GT_REG_READ (PCI_1_CONFIG_DATA_VIRTUAL_REG, &stat);
+
+ GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
+ GT_REG_WRITE (PCI_1_CONFIG_DATA_VIRTUAL_REG,
+ (stat & 0xffff0000) | CFG_PCI_IDSEL);
+ }
+
+ /* Enable master */
+ PCI_MASTER_ENABLE (0, SELF);
+ PCI_MASTER_ENABLE (1, SELF);
+
+ /* Enable PCI0/1 Mem0 and IO 0 disable all others */
+ GT_REG_READ (BASE_ADDR_ENABLE, &stat);
+ stat |= (1 << 11) | (1 << 12) | (1 << 13) | (1 << 16) | (1 << 17) |
+ (1 << 18);
+ stat &= ~((1 << 9) | (1 << 10) | (1 << 14) | (1 << 15));
+ GT_REG_WRITE (BASE_ADDR_ENABLE, stat);
+
+ /* ronen:
+ * add write to pci remap registers for 64460.
+ * in 64360 when writing to pci base go and overide remap automaticaly,
+ * in 64460 it doesn't
+ */
+ GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CFG_PCI0_IO_SPACE >> 16);
+ GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CFG_PCI0_IO_SPACE_PCI >> 16);
+ GT_REG_WRITE (PCI_0_IO_SIZE, (CFG_PCI0_IO_SIZE - 1) >> 16);
+
+ GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CFG_PCI0_MEM_BASE >> 16);
+ GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CFG_PCI0_MEM_BASE >> 16);
+ GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CFG_PCI0_MEM_SIZE - 1) >> 16);
+
+ GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CFG_PCI1_IO_SPACE >> 16);
+ GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CFG_PCI1_IO_SPACE_PCI >> 16);
+ GT_REG_WRITE (PCI_1_IO_SIZE, (CFG_PCI1_IO_SIZE - 1) >> 16);
+
+ GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CFG_PCI1_MEM_BASE >> 16);
+ GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CFG_PCI1_MEM_BASE >> 16);
+ GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CFG_PCI1_MEM_SIZE - 1) >> 16);
+
+ /* PCI interface settings */
+ /* Timeout set to retry forever */
+ GT_REG_WRITE (PCI_0TIMEOUT_RETRY, 0x0);
+ GT_REG_WRITE (PCI_1TIMEOUT_RETRY, 0x0);
+
+ /* ronen - enable only CS0 and Internal reg!! */
+ GT_REG_WRITE (PCI_0BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe);
+ GT_REG_WRITE (PCI_1BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe);
+
+ /* ronen:
+ * update the pci internal registers base address.
+ */
+#ifdef MAP_PCI
+ for (stat = 0; stat <= PCI_HOST1; stat++)
+ pciWriteConfigReg (stat,
+ PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS,
+ SELF, CFG_GT_REGS);
+#endif
+
+}
+#endif
+
+/* Setup CPU interface paramaters */
+static void gt_cpu_config (void)
+{
+ cpu_t cpu = get_cpu_type ();
+ ulong tmp;
+
+ /* cpu configuration register */
+ tmp = GTREGREAD (CPU_CONFIGURATION);
+ /* set the SINGLE_CPU bit see MV64460 */
+#ifndef CFG_GT_DUAL_CPU /* SINGLE_CPU seems to cause JTAG problems */
+ tmp |= CPU_CONF_SINGLE_CPU;
+#endif
+ tmp &= ~CPU_CONF_AACK_DELAY_2;
+ tmp |= CPU_CONF_DP_VALID;
+ tmp |= CPU_CONF_AP_VALID;
+ tmp |= CPU_CONF_PIPELINE;
+ GT_REG_WRITE (CPU_CONFIGURATION, tmp); /* Marvell (VXWorks) writes 0x20220FF */
+
+ /* CPU master control register */
+ tmp = GTREGREAD (CPU_MASTER_CONTROL);
+ tmp |= CPU_MAST_CTL_ARB_EN;
+
+ if ((cpu == CPU_7400) ||
+ (cpu == CPU_7410) || (cpu == CPU_7455) || (cpu == CPU_7450)) {
+
+ tmp |= CPU_MAST_CTL_CLEAN_BLK;
+ tmp |= CPU_MAST_CTL_FLUSH_BLK;
+
+ } else {
+ /* cleanblock must be cleared for CPUs
+ * that do not support this command (603e, 750)
+ * see Res#1 */
+ tmp &= ~CPU_MAST_CTL_CLEAN_BLK;
+ tmp &= ~CPU_MAST_CTL_FLUSH_BLK;
+ }
+ GT_REG_WRITE (CPU_MASTER_CONTROL, tmp);
+}
+
+/*
+ * board_early_init_f.
+ *
+ * set up gal. device mappings, etc.
+ */
+int board_early_init_f (void)
+{
+ /* set up the GT the way the kernel wants it
+ * the call to move the GT register space will obviously
+ * fail if it has already been done, but we're going to assume
+ * that if it's not at the power-on location, it's where we put
+ * it last time. (huber)
+ */
+
+ my_remap_gt_regs (CFG_DFL_GT_REGS, CFG_GT_REGS);
+
+#ifdef CONFIG_PCI
+ gt_pci_config ();
+#endif
+ /* mask all external interrupt sources */
+ GT_REG_WRITE (CPU_INTERRUPT_MASK_REGISTER_LOW, 0);
+ GT_REG_WRITE (CPU_INTERRUPT_MASK_REGISTER_HIGH, 0);
+ /* new in >MV6436x */
+ GT_REG_WRITE (CPU_INTERRUPT_1_MASK_REGISTER_LOW, 0);
+ GT_REG_WRITE (CPU_INTERRUPT_1_MASK_REGISTER_HIGH, 0);
+ /* --------------------- */
+ GT_REG_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0);
+ GT_REG_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0);
+ GT_REG_WRITE (PCI_1INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0);
+ GT_REG_WRITE (PCI_1INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0);
+
+ /* Device and Boot bus settings
+ */
+ memoryMapDeviceSpace(DEVICE0, 0, 0);
+ GT_REG_WRITE(DEVICE_BANK0PARAMETERS, 0);
+ memoryMapDeviceSpace(DEVICE1, 0, 0);
+ GT_REG_WRITE(DEVICE_BANK1PARAMETERS, 0);
+ memoryMapDeviceSpace(DEVICE2, 0, 0);
+ GT_REG_WRITE(DEVICE_BANK2PARAMETERS, 0);
+ memoryMapDeviceSpace(DEVICE3, 0, 0);
+ GT_REG_WRITE(DEVICE_BANK3PARAMETERS, 0);
+
+ GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_BOOT_PAR);
+
+ gt_cpu_config();
+
+ /* MPP setup */
+ GT_REG_WRITE (MPP_CONTROL0, CFG_MPP_CONTROL_0);
+ GT_REG_WRITE (MPP_CONTROL1, CFG_MPP_CONTROL_1);
+ GT_REG_WRITE (MPP_CONTROL2, CFG_MPP_CONTROL_2);
+ GT_REG_WRITE (MPP_CONTROL3, CFG_MPP_CONTROL_3);
+
+ GT_REG_WRITE (GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL);
+
+ return 0;
+}
+
+/* various things to do after relocation */
+
+int misc_init_r ()
+{
+ u8 val;
+
+ icache_enable ();
+#ifdef CFG_L2
+ l2cache_enable ();
+#endif
+#ifdef CONFIG_MPSC
+ mpsc_sdma_init ();
+ mpsc_init2 ();
+#endif
+
+ /*
+ * Enable trickle changing in RTC upon powerup
+ * No diode, 250 ohm series resistor
+ */
+ val = 0xa5;
+ i2c_write(CFG_I2C_RTC_ADDR, 8, 1, &val, 1);
+
+ return 0;
+}
+
+int board_early_init_r(void)
+{
+ /* now relocate the debug serial driver */
+ mpsc_putchar += gd->reloc_off;
+ mpsc_getchar += gd->reloc_off;
+ mpsc_test_char += gd->reloc_off;
+
+ return 0;
+}
+
+void after_reloc (ulong dest_addr, gd_t * gd)
+{
+ memoryMapDeviceSpace (BOOT_DEVICE, CFG_BOOT_SPACE, CFG_BOOT_SIZE);
+
+/* display_mem_map(); */
+
+ /* now, jump to the main U-Boot board init code */
+ board_init_r (gd, dest_addr);
+ /* NOTREACHED */
+}
+
+/*
+ * Check Board Identity:
+ * right now, assume borad type. (there is just one...after all)
+ */
+
+int checkboard (void)
+{
+ char *s = getenv("serial#");
+
+ printf("Board: %s", CFG_BOARD_NAME);
+
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+ return (0);
+}
+
+/* utility functions */
+void debug_led (int led, int mode)
+{
+}
+
+int display_mem_map (void)
+{
+ int i, j;
+ unsigned int base, size, width;
+
+ /* SDRAM */
+ printf ("SD (DDR) RAM\n");
+ for (i = 0; i <= BANK3; i++) {
+ base = memoryGetBankBaseAddress (i);
+ size = memoryGetBankSize (i);
+ if (size != 0)
+ printf ("BANK%d: base - 0x%08x\tsize - %dM bytes\n",
+ i, base, size >> 20);
+ }
+#ifdef CONFIG_PCI
+ /* CPU's PCI windows */
+ for (i = 0; i <= PCI_HOST1; i++) {
+ printf ("\nCPU's PCI %d windows\n", i);
+ base = pciGetSpaceBase (i, PCI_IO);
+ size = pciGetSpaceSize (i, PCI_IO);
+ printf (" IO: base - 0x%08x\tsize - %dM bytes\n", base,
+ size >> 20);
+ /* ronen currently only first PCI MEM is used 3 */
+ for (j = 0; j <= PCI_REGION0; j++) {
+ base = pciGetSpaceBase (i, j);
+ size = pciGetSpaceSize (i, j);
+ printf ("MEMORY %d: base - 0x%08x\tsize - %dM bytes\n",
+ j, base, size >> 20);
+ }
+ }
+#endif /* of CONFIG_PCI */
+
+ /* Bootrom */
+ base = memoryGetDeviceBaseAddress (BOOT_DEVICE); /* Boot */
+ size = memoryGetDeviceSize (BOOT_DEVICE);
+ width = memoryGetDeviceWidth (BOOT_DEVICE) * 8;
+ printf (" BOOT: base - 0x%08x size - %dM bytes\twidth - %d bits\t- FLASH\n",
+ base, size >> 20, width);
+
+ return (0);
+}
+
+/* DRAM check routines copied from gw8260 */
+
+#if defined (CFG_DRAM_TEST)
+
+/*********************************************************************/
+/* NAME: move64() - moves a double word (64-bit) */
+/* */
+/* DESCRIPTION: */
+/* this function performs a double word move from the data at */
+/* the source pointer to the location at the destination pointer. */
+/* */
+/* INPUTS: */
+/* unsigned long long *src - pointer to data to move */
+/* */
+/* OUTPUTS: */
+/* unsigned long long *dest - pointer to locate to move data */
+/* */
+/* RETURNS: */
+/* None */
+/* */
+/* RESTRICTIONS/LIMITATIONS: */
+/* May cloober fr0. */
+/* */
+/*********************************************************************/
+static void move64 (unsigned long long *src, unsigned long long *dest)
+{
+ asm ("lfd 0, 0(3)\n\t" /* fpr0 = *scr */
+ "stfd 0, 0(4)" /* *dest = fpr0 */
+ : : : "fr0"); /* Clobbers fr0 */
+ return;
+}
+
+
+#if defined (CFG_DRAM_TEST_DATA)
+
+unsigned long long pattern[] = {
+ 0xaaaaaaaaaaaaaaaaULL,
+ 0xccccccccccccccccULL,
+ 0xf0f0f0f0f0f0f0f0ULL,
+ 0xff00ff00ff00ff00ULL,
+ 0xffff0000ffff0000ULL,
+ 0xffffffff00000000ULL,
+ 0x00000000ffffffffULL,
+ 0x0000ffff0000ffffULL,
+ 0x00ff00ff00ff00ffULL,
+ 0x0f0f0f0f0f0f0f0fULL,
+ 0x3333333333333333ULL,
+ 0x5555555555555555ULL
+};
+
+/*********************************************************************/
+/* NAME: mem_test_data() - test data lines for shorts and opens */
+/* */
+/* DESCRIPTION: */
+/* Tests data lines for shorts and opens by forcing adjacent data */
+/* to opposite states. Because the data lines could be routed in */
+/* an arbitrary manner the must ensure test patterns ensure that */
+/* every case is tested. By using the following series of binary */
+/* patterns every combination of adjacent bits is test regardless */
+/* of routing. */
+/* */
+/* ...101010101010101010101010 */
+/* ...110011001100110011001100 */
+/* ...111100001111000011110000 */
+/* ...111111110000000011111111 */
+/* */
+/* Carrying this out, gives us six hex patterns as follows: */
+/* */
+/* 0xaaaaaaaaaaaaaaaa */
+/* 0xcccccccccccccccc */
+/* 0xf0f0f0f0f0f0f0f0 */
+/* 0xff00ff00ff00ff00 */
+/* 0xffff0000ffff0000 */
+/* 0xffffffff00000000 */
+/* */
+/* The number test patterns will always be given by: */
+/* */
+/* log(base 2)(number data bits) = log2 (64) = 6 */
+/* */
+/* To test for short and opens to other signals on our boards. we */
+/* simply */
+/* test with the 1's complemnt of the paterns as well. */
+/* */
+/* OUTPUTS: */
+/* Displays failing test pattern */
+/* */
+/* RETURNS: */
+/* 0 - Passed test */
+/* 1 - Failed test */
+/* */
+/* RESTRICTIONS/LIMITATIONS: */
+/* Assumes only one one SDRAM bank */
+/* */
+/*********************************************************************/
+int mem_test_data (void)
+{
+ unsigned long long *pmem = (unsigned long long *) CFG_MEMTEST_START;
+ unsigned long long temp64 = 0;
+ int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
+ int i;
+ unsigned int hi, lo;
+
+ for (i = 0; i < num_patterns; i++) {
+ move64 (&(pattern[i]), pmem);
+ move64 (pmem, &temp64);
+
+ /* hi = (temp64>>32) & 0xffffffff; */
+ /* lo = temp64 & 0xffffffff; */
+ /* printf("\ntemp64 = 0x%08x%08x", hi, lo); */
+
+ hi = (pattern[i] >> 32) & 0xffffffff;
+ lo = pattern[i] & 0xffffffff;
+ /* printf("\npattern[%d] = 0x%08x%08x", i, hi, lo); */
+
+ if (temp64 != pattern[i]) {
+ printf ("\n Data Test Failed, pattern 0x%08x%08x",
+ hi, lo);
+ return 1;
+ }
+ }
+
+ return 0;
+}
+#endif /* CFG_DRAM_TEST_DATA */
+
+#if defined (CFG_DRAM_TEST_ADDRESS)
+/*********************************************************************/
+/* NAME: mem_test_address() - test address lines */
+/* */
+/* DESCRIPTION: */
+/* This function performs a test to verify that each word im */
+/* memory is uniquly addressable. The test sequence is as follows: */
+/* */
+/* 1) write the address of each word to each word. */
+/* 2) verify that each location equals its address */
+/* */
+/* OUTPUTS: */
+/* Displays failing test pattern and address */
+/* */
+/* RETURNS: */
+/* 0 - Passed test */
+/* 1 - Failed test */
+/* */
+/* RESTRICTIONS/LIMITATIONS: */
+/* */
+/* */
+/*********************************************************************/
+int mem_test_address (void)
+{
+ volatile unsigned int *pmem =
+ (volatile unsigned int *) CFG_MEMTEST_START;
+ const unsigned int size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 4;
+ unsigned int i;
+
+ /* write address to each location */
+ for (i = 0; i < size; i++)
+ pmem[i] = i;
+
+ /* verify each loaction */
+ for (i = 0; i < size; i++) {
+ if (pmem[i] != i) {
+ printf ("\n Address Test Failed at 0x%x", i);
+ return 1;
+ }
+ }
+ return 0;
+}
+#endif /* CFG_DRAM_TEST_ADDRESS */
+
+#if defined (CFG_DRAM_TEST_WALK)
+/*********************************************************************/
+/* NAME: mem_march() - memory march */
+/* */
+/* DESCRIPTION: */
+/* Marches up through memory. At each location verifies rmask if */
+/* read = 1. At each location write wmask if write = 1. Displays */
+/* failing address and pattern. */
+/* */
+/* INPUTS: */
+/* volatile unsigned long long * base - start address of test */
+/* unsigned int size - number of dwords(64-bit) to test */
+/* unsigned long long rmask - read verify mask */
+/* unsigned long long wmask - wrtie verify mask */
+/* short read - verifies rmask if read = 1 */
+/* short write - writes wmask if write = 1 */
+/* */
+/* OUTPUTS: */
+/* Displays failing test pattern and address */
+/* */
+/* RETURNS: */
+/* 0 - Passed test */
+/* 1 - Failed test */
+/* */
+/* RESTRICTIONS/LIMITATIONS: */
+/* */
+/* */
+/*********************************************************************/
+int mem_march (volatile unsigned long long *base,
+ unsigned int size,
+ unsigned long long rmask,
+ unsigned long long wmask, short read, short write)
+{
+ unsigned int i;
+ unsigned long long temp = 0;
+ unsigned int hitemp, lotemp, himask, lomask;
+
+ for (i = 0; i < size; i++) {
+ if (read != 0) {
+ /* temp = base[i]; */
+ move64 ((unsigned long long *) &(base[i]), &temp);
+ if (rmask != temp) {
+ hitemp = (temp >> 32) & 0xffffffff;
+ lotemp = temp & 0xffffffff;
+ himask = (rmask >> 32) & 0xffffffff;
+ lomask = rmask & 0xffffffff;
+
+ printf ("\n Walking one's test failed: address = 0x%08x," "\n\texpected 0x%08x%08x, found 0x%08x%08x", i << 3, himask, lomask, hitemp, lotemp);
+ return 1;
+ }
+ }
+ if (write != 0) {
+ /* base[i] = wmask; */
+ move64 (&wmask, (unsigned long long *) &(base[i]));
+ }
+ }
+ return 0;
+}
+#endif /* CFG_DRAM_TEST_WALK */
+
+/*********************************************************************/
+/* NAME: mem_test_walk() - a simple walking ones test */
+/* */
+/* DESCRIPTION: */
+/* Performs a walking ones through entire physical memory. The */
+/* test uses as series of memory marches, mem_march(), to verify */
+/* and write the test patterns to memory. The test sequence is as */
+/* follows: */
+/* 1) march writing 0000...0001 */
+/* 2) march verifying 0000...0001 , writing 0000...0010 */
+/* 3) repeat step 2 shifting masks left 1 bit each time unitl */
+/* the write mask equals 1000...0000 */
+/* 4) march verifying 1000...0000 */
+/* The test fails if any of the memory marches return a failure. */
+/* */
+/* OUTPUTS: */
+/* Displays which pass on the memory test is executing */
+/* */
+/* RETURNS: */
+/* 0 - Passed test */
+/* 1 - Failed test */
+/* */
+/* RESTRICTIONS/LIMITATIONS: */
+/* */
+/* */
+/*********************************************************************/
+int mem_test_walk (void)
+{
+ unsigned long long mask;
+ volatile unsigned long long *pmem =
+ (volatile unsigned long long *) CFG_MEMTEST_START;
+ const unsigned long size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 8;
+
+ unsigned int i;
+
+ mask = 0x01;
+
+ printf ("Initial Pass");
+ mem_march (pmem, size, 0x0, 0x1, 0, 1);
+
+ printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
+ printf (" ");
+ printf (" ");
+ printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
+
+ for (i = 0; i < 63; i++) {
+ printf ("Pass %2d", i + 2);
+ if (mem_march (pmem, size, mask, mask << 1, 1, 1) != 0) {
+ /*printf("mask: 0x%x, pass: %d, ", mask, i); */
+ return 1;
+ }
+ mask = mask << 1;
+ printf ("\b\b\b\b\b\b\b");
+ }
+
+ printf ("Last Pass");
+ if (mem_march (pmem, size, 0, mask, 0, 1) != 0) {
+ /* printf("mask: 0x%x", mask); */
+ return 1;
+ }
+ printf ("\b\b\b\b\b\b\b\b\b");
+ printf (" ");
+ printf ("\b\b\b\b\b\b\b\b\b");
+
+ return 0;
+}
+
+/*********************************************************************/
+/* NAME: testdram() - calls any enabled memory tests */
+/* */
+/* DESCRIPTION: */
+/* Runs memory tests if the environment test variables are set to */
+/* 'y'. */
+/* */
+/* INPUTS: */
+/* testdramdata - If set to 'y', data test is run. */
+/* testdramaddress - If set to 'y', address test is run. */
+/* testdramwalk - If set to 'y', walking ones test is run */
+/* */
+/* OUTPUTS: */
+/* None */
+/* */
+/* RETURNS: */
+/* 0 - Passed test */
+/* 1 - Failed test */
+/* */
+/* RESTRICTIONS/LIMITATIONS: */
+/* */
+/* */
+/*********************************************************************/
+int testdram (void)
+{
+ char *s;
+ int rundata = 0;
+ int runaddress = 0;
+ int runwalk = 0;
+
+#ifdef CFG_DRAM_TEST_DATA
+ s = getenv ("testdramdata");
+ rundata = (s && (*s == 'y')) ? 1 : 0;
+#endif
+#ifdef CFG_DRAM_TEST_ADDRESS
+ s = getenv ("testdramaddress");
+ runaddress = (s && (*s == 'y')) ? 1 : 0;
+#endif
+#ifdef CFG_DRAM_TEST_WALK
+ s = getenv ("testdramwalk");
+ runwalk = (s && (*s == 'y')) ? 1 : 0;
+#endif
+
+ if ((rundata == 1) || (runaddress == 1) || (runwalk == 1))
+ printf ("Testing RAM from 0x%08x to 0x%08x ... "
+ "(don't panic... that will take a moment !!!!)\n",
+ CFG_MEMTEST_START, CFG_MEMTEST_END);
+#ifdef CFG_DRAM_TEST_DATA
+ if (rundata == 1) {
+ printf ("Test DATA ... ");
+ if (mem_test_data () == 1) {
+ printf ("failed \n");
+ return 1;
+ } else
+ printf ("ok \n");
+ }
+#endif
+#ifdef CFG_DRAM_TEST_ADDRESS
+ if (runaddress == 1) {
+ printf ("Test ADDRESS ... ");
+ if (mem_test_address () == 1) {
+ printf ("failed \n");
+ return 1;
+ } else
+ printf ("ok \n");
+ }
+#endif
+#ifdef CFG_DRAM_TEST_WALK
+ if (runwalk == 1) {
+ printf ("Test WALKING ONEs ... ");
+ if (mem_test_walk () == 1) {
+ printf ("failed \n");
+ return 1;
+ } else
+ printf ("ok \n");
+ }
+#endif
+ if ((rundata == 1) || (runaddress == 1) || (runwalk == 1))
+ printf ("passed\n");
+ return 0;
+
+}
+#endif /* CFG_DRAM_TEST */
+
+/* ronen - the below functions are used by the bootm function */
+/* - we map the base register to fbe00000 (same mapping as in the LSP) */
+/* - we turn off the RX gig dmas - to prevent the dma from overunning */
+/* the kernel data areas. */
+/* - we diable and invalidate the icache and dcache. */
+void my_remap_gt_regs_bootm (u32 cur_loc, u32 new_loc)
+{
+ u32 temp;
+
+ temp = in_le32 ((u32 *) (new_loc + INTERNAL_SPACE_DECODE));
+ if ((temp & 0xffff) == new_loc >> 16)
+ return;
+
+ temp = (in_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE)) &
+ 0xffff0000) | (new_loc >> 16);
+
+ out_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE), temp);
+
+ while ((WORD_SWAP (*((volatile unsigned int *) (NONE_CACHEABLE |
+ new_loc |
+ (INTERNAL_SPACE_DECODE)))))
+ != temp);
+
+}
diff --git a/board/prodrive/p3mx/pci.c b/board/prodrive/p3mx/pci.c
new file mode 100644
index 0000000..137739b
--- /dev/null
+++ b/board/prodrive/p3mx/pci.c
@@ -0,0 +1,1025 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+/* PCI.c - PCI functions */
+
+
+#include <common.h>
+#ifdef CONFIG_PCI
+#include <pci.h>
+
+#ifdef CONFIG_PCI_PNP
+void pciauto_config_init(struct pci_controller *hose);
+int pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned int *bar);
+#endif
+
+#include "../../Marvell/include/pci.h"
+
+#undef DEBUG
+#undef IDE_SET_NATIVE_MODE
+static unsigned int local_buses[] = { 0, 0 };
+
+static const unsigned char pci_irq_swizzle[2][PCI_MAX_DEVICES] = {
+ {0, 0, 0, 0, 0, 0, 0, 27, 27, [9 ... PCI_MAX_DEVICES - 1] = 0 },
+ {0, 0, 0, 0, 0, 0, 0, 29, 29, [9 ... PCI_MAX_DEVICES - 1] = 0 },
+};
+
+#ifdef CONFIG_USE_CPCIDVI
+typedef struct {
+ unsigned int base;
+ unsigned int init;
+} GT_CPCIDVI_ROM_T;
+
+static GT_CPCIDVI_ROM_T gt_cpcidvi_rom = {0, 0};
+#endif
+
+#ifdef DEBUG
+static const unsigned int pci_bus_list[] = { PCI_0_MODE, PCI_1_MODE };
+static void gt_pci_bus_mode_display (PCI_HOST host)
+{
+ unsigned int mode;
+
+
+ mode = (GTREGREAD (pci_bus_list[host]) & (BIT4 | BIT5)) >> 4;
+ switch (mode) {
+ case 0:
+ printf ("PCI %d bus mode: Conventional PCI\n", host);
+ break;
+ case 1:
+ printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
+ break;
+ case 2:
+ printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
+ break;
+ case 3:
+ printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
+ break;
+ default:
+ printf ("Unknown BUS %d\n", mode);
+ }
+}
+#endif
+
+static const unsigned int pci_p2p_configuration_reg[] = {
+ PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
+};
+
+static const unsigned int pci_configuration_address[] = {
+ PCI_0CONFIGURATION_ADDRESS, PCI_1CONFIGURATION_ADDRESS
+};
+
+static const unsigned int pci_configuration_data[] = {
+ PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER,
+ PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER
+};
+
+static const unsigned int pci_error_cause_reg[] = {
+ PCI_0ERROR_CAUSE, PCI_1ERROR_CAUSE
+};
+
+static const unsigned int pci_arbiter_control[] = {
+ PCI_0ARBITER_CONTROL, PCI_1ARBITER_CONTROL
+};
+
+static const unsigned int pci_address_space_en[] = {
+ PCI_0_BASE_ADDR_REG_ENABLE, PCI_1_BASE_ADDR_REG_ENABLE
+};
+
+static const unsigned int pci_snoop_control_base_0_low[] = {
+ PCI_0SNOOP_CONTROL_BASE_0_LOW, PCI_1SNOOP_CONTROL_BASE_0_LOW
+};
+static const unsigned int pci_snoop_control_top_0[] = {
+ PCI_0SNOOP_CONTROL_TOP_0, PCI_1SNOOP_CONTROL_TOP_0
+};
+
+static const unsigned int pci_access_control_base_0_low[] = {
+ PCI_0ACCESS_CONTROL_BASE_0_LOW, PCI_1ACCESS_CONTROL_BASE_0_LOW
+};
+static const unsigned int pci_access_control_top_0[] = {
+ PCI_0ACCESS_CONTROL_TOP_0, PCI_1ACCESS_CONTROL_TOP_0
+};
+
+static const unsigned int pci_scs_bank_size[2][4] = {
+ {PCI_0SCS_0_BANK_SIZE, PCI_0SCS_1_BANK_SIZE,
+ PCI_0SCS_2_BANK_SIZE, PCI_0SCS_3_BANK_SIZE},
+ {PCI_1SCS_0_BANK_SIZE, PCI_1SCS_1_BANK_SIZE,
+ PCI_1SCS_2_BANK_SIZE, PCI_1SCS_3_BANK_SIZE}
+};
+
+static const unsigned int pci_p2p_configuration[] = {
+ PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
+};
+
+
+/********************************************************************
+* pciWriteConfigReg - Write to a PCI configuration register
+* - Make sure the GT is configured as a master before writing
+* to another device on the PCI.
+* - The function takes care of Big/Little endian conversion.
+*
+*
+* Inputs: unsigned int regOffset: The register offset as it apears in the GT spec
+* (or any other PCI device spec)
+* pciDevNum: The device number needs to be addressed.
+*
+* Configuration Address 0xCF8:
+*
+* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
+* |congif|Reserved| Bus |Device|Function|Register|00|
+* |Enable| |Number|Number| Number | Number | | <=field Name
+*
+*********************************************************************/
+void pciWriteConfigReg (PCI_HOST host, unsigned int regOffset,
+ unsigned int pciDevNum, unsigned int data)
+{
+ volatile unsigned int DataForAddrReg;
+ unsigned int functionNum;
+ unsigned int busNum = 0;
+ unsigned int addr;
+
+ if (pciDevNum > 32) /* illegal device Number */
+ return;
+ if (pciDevNum == SELF) { /* configure our configuration space. */
+ pciDevNum =
+ (GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
+ 0x1f;
+ busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
+ 0xff0000;
+ }
+ functionNum = regOffset & 0x00000700;
+ pciDevNum = pciDevNum << 11;
+ regOffset = regOffset & 0xfc;
+ DataForAddrReg =
+ (regOffset | pciDevNum | functionNum | busNum) | BIT31;
+ GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
+ GT_REG_READ (pci_configuration_address[host], &addr);
+ if (addr != DataForAddrReg)
+ return;
+ GT_REG_WRITE (pci_configuration_data[host], data);
+}
+
+/********************************************************************
+* pciReadConfigReg - Read from a PCI0 configuration register
+* - Make sure the GT is configured as a master before reading
+* from another device on the PCI.
+* - The function takes care of Big/Little endian conversion.
+* INPUTS: regOffset: The register offset as it apears in the GT spec (or PCI
+* spec)
+* pciDevNum: The device number needs to be addressed.
+* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
+* cause register to make sure the data is valid
+*
+* Configuration Address 0xCF8:
+*
+* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
+* |congif|Reserved| Bus |Device|Function|Register|00|
+* |Enable| |Number|Number| Number | Number | | <=field Name
+*
+*********************************************************************/
+unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset,
+ unsigned int pciDevNum)
+{
+ volatile unsigned int DataForAddrReg;
+ unsigned int data;
+ unsigned int functionNum;
+ unsigned int busNum = 0;
+
+ if (pciDevNum > 32) /* illegal device Number */
+ return 0xffffffff;
+ if (pciDevNum == SELF) { /* configure our configuration space. */
+ pciDevNum =
+ (GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
+ 0x1f;
+ busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
+ 0xff0000;
+ }
+ functionNum = regOffset & 0x00000700;
+ pciDevNum = pciDevNum << 11;
+ regOffset = regOffset & 0xfc;
+ DataForAddrReg =
+ (regOffset | pciDevNum | functionNum | busNum) | BIT31;
+ GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
+ GT_REG_READ (pci_configuration_address[host], &data);
+ if (data != DataForAddrReg)
+ return 0xffffffff;
+ GT_REG_READ (pci_configuration_data[host], &data);
+ return data;
+}
+
+/********************************************************************
+* pciOverBridgeWriteConfigReg - Write to a PCI configuration register where
+* the agent is placed on another Bus. For more
+* information read P2P in the PCI spec.
+*
+* Inputs: unsigned int regOffset - The register offset as it apears in the
+* GT spec (or any other PCI device spec).
+* unsigned int pciDevNum - The device number needs to be addressed.
+* unsigned int busNum - On which bus does the Target agent connect
+* to.
+* unsigned int data - data to be written.
+*
+* Configuration Address 0xCF8:
+*
+* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
+* |congif|Reserved| Bus |Device|Function|Register|01|
+* |Enable| |Number|Number| Number | Number | | <=field Name
+*
+* The configuration Address is configure as type-I (bits[1:0] = '01') due to
+* PCI spec referring to P2P.
+*
+*********************************************************************/
+void pciOverBridgeWriteConfigReg (PCI_HOST host,
+ unsigned int regOffset,
+ unsigned int pciDevNum,
+ unsigned int busNum, unsigned int data)
+{
+ unsigned int DataForReg;
+ unsigned int functionNum;
+
+ functionNum = regOffset & 0x00000700;
+ pciDevNum = pciDevNum << 11;
+ regOffset = regOffset & 0xff;
+ busNum = busNum << 16;
+ if (pciDevNum == SELF) { /* This board */
+ DataForReg = (regOffset | pciDevNum | functionNum) | BIT0;
+ } else {
+ DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
+ BIT31 | BIT0;
+ }
+ GT_REG_WRITE (pci_configuration_address[host], DataForReg);
+ GT_REG_WRITE (pci_configuration_data[host], data);
+}
+
+
+/********************************************************************
+* pciOverBridgeReadConfigReg - Read from a PCIn configuration register where
+* the agent target locate on another PCI bus.
+* - Make sure the GT is configured as a master
+* before reading from another device on the PCI.
+* - The function takes care of Big/Little endian
+* conversion.
+* INPUTS: regOffset: The register offset as it apears in the GT spec (or PCI
+* spec). (configuration register offset.)
+* pciDevNum: The device number needs to be addressed.
+* busNum: the Bus number where the agent is place.
+* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
+* cause register to make sure the data is valid
+*
+* Configuration Address 0xCF8:
+*
+* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
+* |congif|Reserved| Bus |Device|Function|Register|01|
+* |Enable| |Number|Number| Number | Number | | <=field Name
+*
+*********************************************************************/
+unsigned int pciOverBridgeReadConfigReg (PCI_HOST host,
+ unsigned int regOffset,
+ unsigned int pciDevNum,
+ unsigned int busNum)
+{
+ unsigned int DataForReg;
+ unsigned int data;
+ unsigned int functionNum;
+
+ functionNum = regOffset & 0x00000700;
+ pciDevNum = pciDevNum << 11;
+ regOffset = regOffset & 0xff;
+ busNum = busNum << 16;
+ if (pciDevNum == SELF) { /* This board */
+ DataForReg = (regOffset | pciDevNum | functionNum) | BIT31;
+ } else { /* agent on another bus */
+
+ DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
+ BIT0 | BIT31;
+ }
+ GT_REG_WRITE (pci_configuration_address[host], DataForReg);
+ GT_REG_READ (pci_configuration_data[host], &data);
+ return data;
+}
+
+
+/********************************************************************
+* pciGetRegOffset - Gets the register offset for this region config.
+*
+* INPUT: Bus, Region - The bus and region we ask for its base address.
+* OUTPUT: N/A
+* RETURNS: PCI register base address
+*********************************************************************/
+static unsigned int pciGetRegOffset (PCI_HOST host, PCI_REGION region)
+{
+ switch (host) {
+ case PCI_HOST0:
+ switch (region) {
+ case PCI_IO:
+ return PCI_0I_O_LOW_DECODE_ADDRESS;
+ case PCI_REGION0:
+ return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
+ case PCI_REGION1:
+ return PCI_0MEMORY1_LOW_DECODE_ADDRESS;
+ case PCI_REGION2:
+ return PCI_0MEMORY2_LOW_DECODE_ADDRESS;
+ case PCI_REGION3:
+ return PCI_0MEMORY3_LOW_DECODE_ADDRESS;
+ }
+ case PCI_HOST1:
+ switch (region) {
+ case PCI_IO:
+ return PCI_1I_O_LOW_DECODE_ADDRESS;
+ case PCI_REGION0:
+ return PCI_1MEMORY0_LOW_DECODE_ADDRESS;
+ case PCI_REGION1:
+ return PCI_1MEMORY1_LOW_DECODE_ADDRESS;
+ case PCI_REGION2:
+ return PCI_1MEMORY2_LOW_DECODE_ADDRESS;
+ case PCI_REGION3:
+ return PCI_1MEMORY3_LOW_DECODE_ADDRESS;
+ }
+ }
+ return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
+}
+
+static unsigned int pciGetRemapOffset (PCI_HOST host, PCI_REGION region)
+{
+ switch (host) {
+ case PCI_HOST0:
+ switch (region) {
+ case PCI_IO:
+ return PCI_0I_O_ADDRESS_REMAP;
+ case PCI_REGION0:
+ return PCI_0MEMORY0_ADDRESS_REMAP;
+ case PCI_REGION1:
+ return PCI_0MEMORY1_ADDRESS_REMAP;
+ case PCI_REGION2:
+ return PCI_0MEMORY2_ADDRESS_REMAP;
+ case PCI_REGION3:
+ return PCI_0MEMORY3_ADDRESS_REMAP;
+ }
+ case PCI_HOST1:
+ switch (region) {
+ case PCI_IO:
+ return PCI_1I_O_ADDRESS_REMAP;
+ case PCI_REGION0:
+ return PCI_1MEMORY0_ADDRESS_REMAP;
+ case PCI_REGION1:
+ return PCI_1MEMORY1_ADDRESS_REMAP;
+ case PCI_REGION2:
+ return PCI_1MEMORY2_ADDRESS_REMAP;
+ case PCI_REGION3:
+ return PCI_1MEMORY3_ADDRESS_REMAP;
+ }
+ }
+ return PCI_0MEMORY0_ADDRESS_REMAP;
+}
+
+/********************************************************************
+* pciGetBaseAddress - Gets the base address of a PCI.
+* - If the PCI size is 0 then this base address has no meaning!!!
+*
+*
+* INPUT: Bus, Region - The bus and region we ask for its base address.
+* OUTPUT: N/A
+* RETURNS: PCI base address.
+*********************************************************************/
+unsigned int pciGetBaseAddress (PCI_HOST host, PCI_REGION region)
+{
+ unsigned int regBase;
+ unsigned int regEnd;
+ unsigned int regOffset = pciGetRegOffset (host, region);
+
+ GT_REG_READ (regOffset, ®Base);
+ GT_REG_READ (regOffset + 8, ®End);
+
+ if (regEnd <= regBase)
+ return 0xffffffff; /* ERROR !!! */
+
+ regBase = regBase << 16;
+ return regBase;
+}
+
+bool pciMapSpace (PCI_HOST host, PCI_REGION region, unsigned int remapBase,
+ unsigned int bankBase, unsigned int bankLength)
+{
+ unsigned int low = 0xfff;
+ unsigned int high = 0x0;
+ unsigned int regOffset = pciGetRegOffset (host, region);
+ unsigned int remapOffset = pciGetRemapOffset (host, region);
+
+ if (bankLength != 0) {
+ low = (bankBase >> 16) & 0xffff;
+ high = ((bankBase + bankLength) >> 16) - 1;
+ }
+
+ GT_REG_WRITE (regOffset, low | (1 << 24)); /* no swapping */
+ GT_REG_WRITE (regOffset + 8, high);
+
+ if (bankLength != 0) { /* must do AFTER writing maps */
+ GT_REG_WRITE (remapOffset, remapBase >> 16); /* sorry, 32 bits only.
+ dont support upper 32
+ in this driver */
+ }
+ return true;
+}
+
+unsigned int pciGetSpaceBase (PCI_HOST host, PCI_REGION region)
+{
+ unsigned int low;
+ unsigned int regOffset = pciGetRegOffset (host, region);
+
+ GT_REG_READ (regOffset, &low);
+ return (low & 0xffff) << 16;
+}
+
+unsigned int pciGetSpaceSize (PCI_HOST host, PCI_REGION region)
+{
+ unsigned int low, high;
+ unsigned int regOffset = pciGetRegOffset (host, region);
+
+ GT_REG_READ (regOffset, &low);
+ GT_REG_READ (regOffset + 8, &high);
+ return ((high & 0xffff) + 1) << 16;
+}
+
+
+/* ronen - 7/Dec/03*/
+/********************************************************************
+* gtPciDisable/EnableInternalBAR - This function enable/disable PCI BARS.
+* Inputs: one of the PCI BAR
+*********************************************************************/
+void gtPciEnableInternalBAR (PCI_HOST host, PCI_INTERNAL_BAR pciBAR)
+{
+ RESET_REG_BITS (pci_address_space_en[host], BIT0 << pciBAR);
+}
+
+void gtPciDisableInternalBAR (PCI_HOST host, PCI_INTERNAL_BAR pciBAR)
+{
+ SET_REG_BITS (pci_address_space_en[host], BIT0 << pciBAR);
+}
+
+/********************************************************************
+* pciMapMemoryBank - Maps PCI_host memory bank "bank" for the slave.
+*
+* Inputs: base and size of PCI SCS
+*********************************************************************/
+void pciMapMemoryBank (PCI_HOST host, MEMORY_BANK bank,
+ unsigned int pciDramBase, unsigned int pciDramSize)
+{
+ /*ronen different function for 3rd bank. */
+ unsigned int offset = (bank < 2) ? bank * 8 : 0x100 + (bank - 2) * 8;
+
+ pciDramBase = pciDramBase & 0xfffff000;
+ pciDramBase = pciDramBase | (pciReadConfigReg (host,
+ PCI_SCS_0_BASE_ADDRESS
+ + offset,
+ SELF) & 0x00000fff);
+ pciWriteConfigReg (host, PCI_SCS_0_BASE_ADDRESS + offset, SELF,
+ pciDramBase);
+ if (pciDramSize == 0)
+ pciDramSize++;
+ GT_REG_WRITE (pci_scs_bank_size[host][bank], pciDramSize - 1);
+ gtPciEnableInternalBAR (host, bank);
+}
+
+/********************************************************************
+* pciSetRegionFeatures - This function modifys one of the 8 regions with
+* feature bits given as an input.
+* - Be advised to check the spec before modifying them.
+* Inputs: PCI_PROTECT_REGION region - one of the eight regions.
+* unsigned int features - See file: pci.h there are defintion for those
+* region features.
+* unsigned int baseAddress - The region base Address.
+* unsigned int topAddress - The region top Address.
+* Returns: false if one of the parameters is erroneous true otherwise.
+*********************************************************************/
+bool pciSetRegionFeatures (PCI_HOST host, PCI_ACCESS_REGIONS region,
+ unsigned int features, unsigned int baseAddress,
+ unsigned int regionLength)
+{
+ unsigned int accessLow;
+ unsigned int accessHigh;
+ unsigned int accessTop = baseAddress + regionLength;
+
+ if (regionLength == 0) { /* close the region. */
+ pciDisableAccessRegion (host, region);
+ return true;
+ }
+ /* base Address is store is bits [11:0] */
+ accessLow = (baseAddress & 0xfff00000) >> 20;
+ /* All the features are update according to the defines in pci.h (to be on
+ the safe side we disable bits: [11:0] */
+ accessLow = accessLow | (features & 0xfffff000);
+ /* write to the Low Access Region register */
+ GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region,
+ accessLow);
+
+ accessHigh = (accessTop & 0xfff00000) >> 20;
+
+ /* write to the High Access Region register */
+ GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region,
+ accessHigh - 1);
+ return true;
+}
+
+/********************************************************************
+* pciDisableAccessRegion - Disable The given Region by writing MAX size
+* to its low Address and MIN size to its high Address.
+*
+* Inputs: PCI_ACCESS_REGIONS region - The region we to be Disabled.
+* Returns: N/A.
+*********************************************************************/
+void pciDisableAccessRegion (PCI_HOST host, PCI_ACCESS_REGIONS region)
+{
+ /* writing back the registers default values. */
+ GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region,
+ 0x01001fff);
+ GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region, 0);
+}
+
+/********************************************************************
+* pciArbiterEnable - Enables PCI-0`s Arbitration mechanism.
+*
+* Inputs: N/A
+* Returns: true.
+*********************************************************************/
+bool pciArbiterEnable (PCI_HOST host)
+{
+ unsigned int regData;
+
+ GT_REG_READ (pci_arbiter_control[host], ®Data);
+ GT_REG_WRITE (pci_arbiter_control[host], regData | BIT31);
+ return true;
+}
+
+/********************************************************************
+* pciArbiterDisable - Disable PCI-0`s Arbitration mechanism.
+*
+* Inputs: N/A
+* Returns: true
+*********************************************************************/
+bool pciArbiterDisable (PCI_HOST host)
+{
+ unsigned int regData;
+
+ GT_REG_READ (pci_arbiter_control[host], ®Data);
+ GT_REG_WRITE (pci_arbiter_control[host], regData & 0x7fffffff);
+ return true;
+}
+
+/********************************************************************
+* pciSetArbiterAgentsPriority - Priority setup for the PCI agents (Hi or Low)
+*
+* Inputs: PCI_AGENT_PRIO internalAgent - priotity for internal agent.
+* PCI_AGENT_PRIO externalAgent0 - priotity for external#0 agent.
+* PCI_AGENT_PRIO externalAgent1 - priotity for external#1 agent.
+* PCI_AGENT_PRIO externalAgent2 - priotity for external#2 agent.
+* PCI_AGENT_PRIO externalAgent3 - priotity for external#3 agent.
+* PCI_AGENT_PRIO externalAgent4 - priotity for external#4 agent.
+* PCI_AGENT_PRIO externalAgent5 - priotity for external#5 agent.
+* Returns: true
+*********************************************************************/
+bool pciSetArbiterAgentsPriority (PCI_HOST host, PCI_AGENT_PRIO internalAgent,
+ PCI_AGENT_PRIO externalAgent0,
+ PCI_AGENT_PRIO externalAgent1,
+ PCI_AGENT_PRIO externalAgent2,
+ PCI_AGENT_PRIO externalAgent3,
+ PCI_AGENT_PRIO externalAgent4,
+ PCI_AGENT_PRIO externalAgent5)
+{
+ unsigned int regData;
+ unsigned int writeData;
+
+ GT_REG_READ (pci_arbiter_control[host], ®Data);
+ writeData = (internalAgent << 7) + (externalAgent0 << 8) +
+ (externalAgent1 << 9) + (externalAgent2 << 10) +
+ (externalAgent3 << 11) + (externalAgent4 << 12) +
+ (externalAgent5 << 13);
+ regData = (regData & 0xffffc07f) | writeData;
+ GT_REG_WRITE (pci_arbiter_control[host], regData & regData);
+ return true;
+}
+
+/********************************************************************
+* pciParkingDisable - Park on last option disable, with this function you can
+* disable the park on last mechanism for each agent.
+* disabling this option for all agents results parking
+* on the internal master.
+*
+* Inputs: PCI_AGENT_PARK internalAgent - parking Disable for internal agent.
+* PCI_AGENT_PARK externalAgent0 - parking Disable for external#0 agent.
+* PCI_AGENT_PARK externalAgent1 - parking Disable for external#1 agent.
+* PCI_AGENT_PARK externalAgent2 - parking Disable for external#2 agent.
+* PCI_AGENT_PARK externalAgent3 - parking Disable for external#3 agent.
+* PCI_AGENT_PARK externalAgent4 - parking Disable for external#4 agent.
+* PCI_AGENT_PARK externalAgent5 - parking Disable for external#5 agent.
+* Returns: true
+*********************************************************************/
+bool pciParkingDisable (PCI_HOST host, PCI_AGENT_PARK internalAgent,
+ PCI_AGENT_PARK externalAgent0,
+ PCI_AGENT_PARK externalAgent1,
+ PCI_AGENT_PARK externalAgent2,
+ PCI_AGENT_PARK externalAgent3,
+ PCI_AGENT_PARK externalAgent4,
+ PCI_AGENT_PARK externalAgent5)
+{
+ unsigned int regData;
+ unsigned int writeData;
+
+ GT_REG_READ (pci_arbiter_control[host], ®Data);
+ writeData = (internalAgent << 14) + (externalAgent0 << 15) +
+ (externalAgent1 << 16) + (externalAgent2 << 17) +
+ (externalAgent3 << 18) + (externalAgent4 << 19) +
+ (externalAgent5 << 20);
+ regData = (regData & ~(0x7f << 14)) | writeData;
+ GT_REG_WRITE (pci_arbiter_control[host], regData);
+ return true;
+}
+
+/********************************************************************
+* pciEnableBrokenAgentDetection - A master is said to be broken if it fails to
+* respond to grant assertion within a window specified in
+* the input value: 'brokenValue'.
+*
+* Inputs: unsigned char brokenValue - A value which limits the Master to hold the
+* grant without asserting frame.
+* Returns: Error for illegal broken value otherwise true.
+*********************************************************************/
+bool pciEnableBrokenAgentDetection (PCI_HOST host, unsigned char brokenValue)
+{
+ unsigned int data;
+ unsigned int regData;
+
+ if (brokenValue > 0xf)
+ return false; /* brokenValue must be 4 bit */
+ data = brokenValue << 3;
+ GT_REG_READ (pci_arbiter_control[host], ®Data);
+ regData = (regData & 0xffffff87) | data;
+ GT_REG_WRITE (pci_arbiter_control[host], regData | BIT1);
+ return true;
+}
+
+/********************************************************************
+* pciDisableBrokenAgentDetection - This function disable the Broken agent
+* Detection mechanism.
+* NOTE: This operation may cause a dead lock on the
+* pci0 arbitration.
+*
+* Inputs: N/A
+* Returns: true.
+*********************************************************************/
+bool pciDisableBrokenAgentDetection (PCI_HOST host)
+{
+ unsigned int regData;
+
+ GT_REG_READ (pci_arbiter_control[host], ®Data);
+ regData = regData & 0xfffffffd;
+ GT_REG_WRITE (pci_arbiter_control[host], regData);
+ return true;
+}
+
+/********************************************************************
+* pciP2PConfig - This function set the PCI_n P2P configurate.
+* For more information on the P2P read PCI spec.
+*
+* Inputs: unsigned int SecondBusLow - Secondery PCI interface Bus Range Lower
+* Boundry.
+* unsigned int SecondBusHigh - Secondry PCI interface Bus Range upper
+* Boundry.
+* unsigned int busNum - The CPI bus number to which the PCI interface
+* is connected.
+* unsigned int devNum - The PCI interface's device number.
+*
+* Returns: true.
+*********************************************************************/
+bool pciP2PConfig (PCI_HOST host, unsigned int SecondBusLow,
+ unsigned int SecondBusHigh,
+ unsigned int busNum, unsigned int devNum)
+{
+ unsigned int regData;
+
+ regData = (SecondBusLow & 0xff) | ((SecondBusHigh & 0xff) << 8) |
+ ((busNum & 0xff) << 16) | ((devNum & 0x1f) << 24);
+ GT_REG_WRITE (pci_p2p_configuration[host], regData);
+ return true;
+}
+
+/********************************************************************
+* pciSetRegionSnoopMode - This function modifys one of the 4 regions which
+* supports Cache Coherency in the PCI_n interface.
+* Inputs: region - One of the four regions.
+* snoopType - There is four optional Types:
+* 1. No Snoop.
+* 2. Snoop to WT region.
+* 3. Snoop to WB region.
+* 4. Snoop & Invalidate to WB region.
+* baseAddress - Base Address of this region.
+* regionLength - Region length.
+* Returns: false if one of the parameters is wrong otherwise return true.
+*********************************************************************/
+bool pciSetRegionSnoopMode (PCI_HOST host, PCI_SNOOP_REGION region,
+ PCI_SNOOP_TYPE snoopType,
+ unsigned int baseAddress,
+ unsigned int regionLength)
+{
+ unsigned int snoopXbaseAddress;
+ unsigned int snoopXtopAddress;
+ unsigned int data;
+ unsigned int snoopHigh = baseAddress + regionLength;
+
+ if ((region > PCI_SNOOP_REGION3) || (snoopType > PCI_SNOOP_WB))
+ return false;
+ snoopXbaseAddress =
+ pci_snoop_control_base_0_low[host] + 0x10 * region;
+ snoopXtopAddress = pci_snoop_control_top_0[host] + 0x10 * region;
+ if (regionLength == 0) { /* closing the region */
+ GT_REG_WRITE (snoopXbaseAddress, 0x0000ffff);
+ GT_REG_WRITE (snoopXtopAddress, 0);
+ return true;
+ }
+ baseAddress = baseAddress & 0xfff00000; /* Granularity of 1MByte */
+ data = (baseAddress >> 20) | snoopType << 12;
+ GT_REG_WRITE (snoopXbaseAddress, data);
+ snoopHigh = (snoopHigh & 0xfff00000) >> 20;
+ GT_REG_WRITE (snoopXtopAddress, snoopHigh - 1);
+ return true;
+}
+
+static int gt_read_config_dword (struct pci_controller *hose,
+ pci_dev_t dev, int offset, u32 * value)
+{
+ int bus = PCI_BUS (dev);
+
+ if ((bus == local_buses[0]) || (bus == local_buses[1])) {
+ *value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr, offset,
+ PCI_DEV (dev));
+ } else {
+ *value = pciOverBridgeReadConfigReg ((PCI_HOST) hose->
+ cfg_addr, offset,
+ PCI_DEV (dev), bus);
+ }
+
+ return 0;
+}
+
+static int gt_write_config_dword (struct pci_controller *hose,
+ pci_dev_t dev, int offset, u32 value)
+{
+ int bus = PCI_BUS (dev);
+
+ if ((bus == local_buses[0]) || (bus == local_buses[1])) {
+ pciWriteConfigReg ((PCI_HOST) hose->cfg_addr, offset,
+ PCI_DEV (dev), value);
+ } else {
+ pciOverBridgeWriteConfigReg ((PCI_HOST) hose->cfg_addr,
+ offset, PCI_DEV (dev), bus,
+ value);
+ }
+ return 0;
+}
+
+
+static void gt_setup_ide (struct pci_controller *hose,
+ pci_dev_t dev, struct pci_config_table *entry)
+{
+ static const int ide_bar[] = { 8, 4, 8, 4, 0, 0 };
+ u32 bar_response, bar_value;
+ int bar;
+
+ for (bar = 0; bar < 6; bar++) {
+ /*ronen different function for 3rd bank. */
+ unsigned int offset =
+ (bar < 2) ? bar * 8 : 0x100 + (bar - 2) * 8;
+
+ pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + offset,
+ 0x0);
+ pci_hose_read_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + offset,
+ &bar_response);
+
+ pciauto_region_allocate (bar_response &
+ PCI_BASE_ADDRESS_SPACE_IO ? hose->
+ pci_io : hose->pci_mem, ide_bar[bar],
+ &bar_value);
+
+ pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + bar * 4,
+ bar_value);
+ }
+}
+
+#ifdef CONFIG_USE_CPCIDVI
+static void gt_setup_cpcidvi (struct pci_controller *hose,
+ pci_dev_t dev, struct pci_config_table *entry)
+{
+ u32 bar_value, pci_response;
+
+ pci_hose_read_config_dword (hose, dev, PCI_COMMAND, &pci_response);
+ pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0, 0xffffffff);
+ pci_hose_read_config_dword (hose, dev, PCI_BASE_ADDRESS_0, &pci_response);
+ pciauto_region_allocate (hose->pci_mem, 0x01000000, &bar_value);
+ pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0, (bar_value & 0xffffff00));
+ pci_hose_write_config_dword (hose, dev, PCI_ROM_ADDRESS, 0x0);
+ pciauto_region_allocate (hose->pci_mem, 0x40000, &bar_value);
+ pci_hose_write_config_dword (hose, dev, PCI_ROM_ADDRESS, (bar_value & 0xffffff00) | 0x01);
+ gt_cpcidvi_rom.base = bar_value & 0xffffff00;
+ gt_cpcidvi_rom.init = 1;
+}
+
+unsigned char gt_cpcidvi_in8(unsigned int offset)
+{
+ unsigned char data;
+
+ if (gt_cpcidvi_rom.init == 0) {
+ return(0);
+ }
+ data = in8((offset & 0x04) + 0x3f000 + gt_cpcidvi_rom.base);
+ return(data);
+}
+
+void gt_cpcidvi_out8(unsigned int offset, unsigned char data)
+{
+ unsigned int off;
+
+ if (gt_cpcidvi_rom.init == 0) {
+ return;
+ }
+ off = data;
+ off = ((off << 3) & 0x7f8) + (offset & 0x4) + 0x3e000 + gt_cpcidvi_rom.base;
+ in8(off);
+ return;
+}
+#endif
+
+/* TODO BJW: Change this for DB64360. This was pulled from the EV64260 */
+/* and is curently not called *. */
+#if 0
+static void gt_fixup_irq (struct pci_controller *hose, pci_dev_t dev)
+{
+ unsigned char pin, irq;
+
+ pci_read_config_byte (dev, PCI_INTERRUPT_PIN, &pin);
+
+ if (pin == 1) { /* only allow INT A */
+ irq = pci_irq_swizzle[(PCI_HOST) hose->
+ cfg_addr][PCI_DEV (dev)];
+ if (irq)
+ pci_write_config_byte (dev, PCI_INTERRUPT_LINE, irq);
+ }
+}
+#endif
+
+struct pci_config_table gt_config_table[] = {
+#ifdef CONFIG_USE_CPCIDVI
+ {PCI_VENDOR_ID_CT, PCI_DEVICE_ID_CT_69030, PCI_CLASS_DISPLAY_VGA,
+ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_cpcidvi},
+#endif
+ {PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE,
+ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_ide},
+ {}
+};
+
+struct pci_controller pci0_hose = {
+/* fixup_irq: gt_fixup_irq, */
+ config_table:gt_config_table,
+};
+
+struct pci_controller pci1_hose = {
+/* fixup_irq: gt_fixup_irq, */
+ config_table:gt_config_table,
+};
+
+void pci_init_board (void)
+{
+ unsigned int command;
+#ifdef CONFIG_PCI_PNP
+ unsigned int bar;
+#endif
+#ifdef DEBUG
+ gt_pci_bus_mode_display (PCI_HOST0);
+#endif
+#ifdef CONFIG_USE_CPCIDVI
+ gt_cpcidvi_rom.init = 0;
+ gt_cpcidvi_rom.base = 0;
+#endif
+
+ pci0_hose.config_table = gt_config_table;
+ pci1_hose.config_table = gt_config_table;
+
+#ifdef CONFIG_USE_CPCIDVI
+ gt_config_table[0].config_device = gt_setup_cpcidvi;
+#endif
+ gt_config_table[1].config_device = gt_setup_ide;
+
+ pci0_hose.first_busno = 0;
+ pci0_hose.last_busno = 0xff;
+ local_buses[0] = pci0_hose.first_busno;
+
+ /* PCI memory space */
+ pci_set_region (pci0_hose.regions + 0,
+ CFG_PCI0_0_MEM_SPACE,
+ CFG_PCI0_0_MEM_SPACE,
+ CFG_PCI0_MEM_SIZE, PCI_REGION_MEM);
+
+ /* PCI I/O space */
+ pci_set_region (pci0_hose.regions + 1,
+ CFG_PCI0_IO_SPACE_PCI,
+ CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE, PCI_REGION_IO);
+
+ pci_set_ops (&pci0_hose,
+ pci_hose_read_config_byte_via_dword,
+ pci_hose_read_config_word_via_dword,
+ gt_read_config_dword,
+ pci_hose_write_config_byte_via_dword,
+ pci_hose_write_config_word_via_dword,
+ gt_write_config_dword);
+ pci0_hose.region_count = 2;
+
+ pci0_hose.cfg_addr = (unsigned int *) PCI_HOST0;
+
+ pci_register_hose (&pci0_hose);
+ pciArbiterDisable(PCI_HOST0); /* on PMC modules no arbiter is used */
+ pciParkingDisable (PCI_HOST0, 1, 1, 1, 1, 1, 1, 1);
+ command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
+ command |= PCI_COMMAND_MASTER;
+ pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
+ command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
+ command |= PCI_COMMAND_MEMORY;
+ pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
+
+#ifdef CONFIG_PCI_PNP
+ pciauto_config_init(&pci0_hose);
+ pciauto_region_allocate(pci0_hose.pci_io, 0x400, &bar);
+#endif
+#ifdef CONFIG_PCI_SCAN_SHOW
+ printf("PCI: Bus Dev VenId DevId Class Int\n");
+#endif
+ pci0_hose.last_busno = pci_hose_scan_bus (&pci0_hose, pci0_hose.first_busno);
+
+#ifdef DEBUG
+ gt_pci_bus_mode_display (PCI_HOST1);
+#endif
+ pci1_hose.first_busno = pci0_hose.last_busno + 1;
+ pci1_hose.last_busno = 0xff;
+ pci1_hose.current_busno = pci1_hose.first_busno;
+ local_buses[1] = pci1_hose.first_busno;
+
+ /* PCI memory space */
+ pci_set_region (pci1_hose.regions + 0,
+ CFG_PCI1_0_MEM_SPACE,
+ CFG_PCI1_0_MEM_SPACE,
+ CFG_PCI1_MEM_SIZE, PCI_REGION_MEM);
+
+ /* PCI I/O space */
+ pci_set_region (pci1_hose.regions + 1,
+ CFG_PCI1_IO_SPACE_PCI,
+ CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
+
+ pci_set_ops (&pci1_hose,
+ pci_hose_read_config_byte_via_dword,
+ pci_hose_read_config_word_via_dword,
+ gt_read_config_dword,
+ pci_hose_write_config_byte_via_dword,
+ pci_hose_write_config_word_via_dword,
+ gt_write_config_dword);
+
+ pci1_hose.region_count = 2;
+
+ pci1_hose.cfg_addr = (unsigned int *) PCI_HOST1;
+
+ pci_register_hose (&pci1_hose);
+
+ pciArbiterEnable (PCI_HOST1);
+ pciParkingDisable (PCI_HOST1, 1, 1, 1, 1, 1, 1, 1);
+
+ command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
+ command |= PCI_COMMAND_MASTER;
+ pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command);
+
+#ifdef CONFIG_PCI_PNP
+ pciauto_config_init(&pci1_hose);
+ pciauto_region_allocate(pci1_hose.pci_io, 0x400, &bar);
+#endif
+ pci1_hose.last_busno = pci_hose_scan_bus (&pci1_hose, pci1_hose.first_busno);
+
+ command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
+ command |= PCI_COMMAND_MEMORY;
+ pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command);
+
+}
+#endif /* of CONFIG_PCI */
diff --git a/board/prodrive/p3mx/ppc_error_no.h b/board/prodrive/p3mx/ppc_error_no.h
new file mode 100644
index 0000000..53687c8
--- /dev/null
+++ b/board/prodrive/p3mx/ppc_error_no.h
@@ -0,0 +1,164 @@
+/*
+ * (C) Copyright 2003
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * BK Id: SCCS/s.errno.h 1.9 06/05/01 21:45:21 paulus
+ */
+#ifndef _MV_PPC_ERRNO_H
+#define _MV_PPC_ERRNO_H
+
+#define EPERM 1 /* Operation not permitted */
+#define ENOENT 2 /* No such file or directory */
+#define ESRCH 3 /* No such process */
+#define EINTR 4 /* Interrupted system call */
+#define EIO 5 /* I/O error */
+#define ENXIO 6 /* No such device or address */
+#define E2BIG 7 /* Arg list too long */
+#define ENOEXEC 8 /* Exec format error */
+#define EBADF 9 /* Bad file number */
+#define ECHILD 10 /* No child processes */
+#define EAGAIN 11 /* Try again */
+#define ENOMEM 12 /* Out of memory */
+#define EACCES 13 /* Permission denied */
+#define EFAULT 14 /* Bad address */
+#define ENOTBLK 15 /* Block device required */
+#define EBUSY 16 /* Device or resource busy */
+#define EEXIST 17 /* File exists */
+#define EXDEV 18 /* Cross-device link */
+#define ENODEV 19 /* No such device */
+#define ENOTDIR 20 /* Not a directory */
+#define EISDIR 21 /* Is a directory */
+#define EINVAL 22 /* Invalid argument */
+#define ENFILE 23 /* File table overflow */
+#define EMFILE 24 /* Too many open files */
+#define ENOTTY 25 /* Not a typewriter */
+#define ETXTBSY 26 /* Text file busy */
+#define EFBIG 27 /* File too large */
+#define ENOSPC 28 /* No space left on device */
+#define ESPIPE 29 /* Illegal seek */
+#define EROFS 30 /* Read-only file system */
+#define EMLINK 31 /* Too many links */
+#define EPIPE 32 /* Broken pipe */
+#define EDOM 33 /* Math argument out of domain of func */
+#define ERANGE 34 /* Math result not representable */
+#define EDEADLK 35 /* Resource deadlock would occur */
+#define ENAMETOOLONG 36 /* File name too long */
+#define ENOLCK 37 /* No record locks available */
+#define ENOSYS 38 /* Function not implemented */
+#define ENOTEMPTY 39 /* Directory not empty */
+#define ELOOP 40 /* Too many symbolic links encountered */
+#define EWOULDBLOCK EAGAIN /* Operation would block */
+#define ENOMSG 42 /* No message of desired type */
+#define EIDRM 43 /* Identifier removed */
+#define ECHRNG 44 /* Channel number out of range */
+#define EL2NSYNC 45 /* Level 2 not synchronized */
+#define EL3HLT 46 /* Level 3 halted */
+#define EL3RST 47 /* Level 3 reset */
+#define ELNRNG 48 /* Link number out of range */
+#define EUNATCH 49 /* Protocol driver not attached */
+#define ENOCSI 50 /* No CSI structure available */
+#define EL2HLT 51 /* Level 2 halted */
+#define EBADE 52 /* Invalid exchange */
+#define EBADR 53 /* Invalid request descriptor */
+#define EXFULL 54 /* Exchange full */
+#define ENOANO 55 /* No anode */
+#define EBADRQC 56 /* Invalid request code */
+#define EBADSLT 57 /* Invalid slot */
+#define EDEADLOCK 58 /* File locking deadlock error */
+#define EBFONT 59 /* Bad font file format */
+#define ENOSTR 60 /* Device not a stream */
+#define ENODATA 61 /* No data available */
+#define ETIME 62 /* Timer expired */
+#define ENOSR 63 /* Out of streams resources */
+#define ENONET 64 /* Machine is not on the network */
+#define ENOPKG 65 /* Package not installed */
+#define EREMOTE 66 /* Object is remote */
+#define ENOLINK 67 /* Link has been severed */
+#define EADV 68 /* Advertise error */
+#define ESRMNT 69 /* Srmount error */
+#define ECOMM 70 /* Communication error on send */
+#define EPROTO 71 /* Protocol error */
+#define EMULTIHOP 72 /* Multihop attempted */
+#define EDOTDOT 73 /* RFS specific error */
+#define EBADMSG 74 /* Not a data message */
+#define EOVERFLOW 75 /* Value too large for defined data type */
+#define ENOTUNIQ 76 /* Name not unique on network */
+#define EBADFD 77 /* File descriptor in bad state */
+#define EREMCHG 78 /* Remote address changed */
+#define ELIBACC 79 /* Can not access a needed shared library */
+#define ELIBBAD 80 /* Accessing a corrupted shared library */
+#define ELIBSCN 81 /* .lib section in a.out corrupted */
+#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
+#define ELIBEXEC 83 /* Cannot exec a shared library directly */
+#define EILSEQ 84 /* Illegal byte sequence */
+#define ERESTART 85 /* Interrupted system call should be restarted */
+#define ESTRPIPE 86 /* Streams pipe error */
+#define EUSERS 87 /* Too many users */
+#define ENOTSOCK 88 /* Socket operation on non-socket */
+#define EDESTADDRREQ 89 /* Destination address required */
+#define EMSGSIZE 90 /* Message too long */
+#define EPROTOTYPE 91 /* Protocol wrong type for socket */
+#define ENOPROTOOPT 92 /* Protocol not available */
+#define EPROTONOSUPPORT 93 /* Protocol not supported */
+#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
+#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
+#define EPFNOSUPPORT 96 /* Protocol family not supported */
+#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
+#define EADDRINUSE 98 /* Address already in use */
+#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
+#define ENETDOWN 100 /* Network is down */
+#define ENETUNREACH 101 /* Network is unreachable */
+#define ENETRESET 102 /* Network dropped connection because of reset */
+#define ECONNABORTED 103 /* Software caused connection abort */
+#define ECONNRESET 104 /* Connection reset by peer */
+#define ENOBUFS 105 /* No buffer space available */
+#define EISCONN 106 /* Transport endpoint is already connected */
+#define ENOTCONN 107 /* Transport endpoint is not connected */
+#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
+#define ETOOMANYREFS 109 /* Too many references: cannot splice */
+#define ETIMEDOUT 110 /* Connection timed out */
+#define ECONNREFUSED 111 /* Connection refused */
+#define EHOSTDOWN 112 /* Host is down */
+#define EHOSTUNREACH 113 /* No route to host */
+#define EALREADY 114 /* Operation already in progress */
+#define EINPROGRESS 115 /* Operation now in progress */
+#define ESTALE 116 /* Stale NFS file handle */
+#define EUCLEAN 117 /* Structure needs cleaning */
+#define ENOTNAM 118 /* Not a XENIX named type file */
+#define ENAVAIL 119 /* No XENIX semaphores available */
+#define EISNAM 120 /* Is a named type file */
+#define EREMOTEIO 121 /* Remote I/O error */
+#define EDQUOT 122 /* Quota exceeded */
+
+#define ENOMEDIUM 123 /* No medium found */
+#define EMEDIUMTYPE 124 /* Wrong medium type */
+
+/* Should never be seen by user programs */
+#define ERESTARTSYS 512
+#define ERESTARTNOINTR 513
+#define ERESTARTNOHAND 514 /* restart if no handler.. */
+#define ENOIOCTLCMD 515 /* No ioctl command */
+
+#define _LAST_ERRNO 515
+
+#endif
diff --git a/board/prodrive/p3mx/sdram_init.c b/board/prodrive/p3mx/sdram_init.c
new file mode 100644
index 0000000..176252e
--- /dev/null
+++ b/board/prodrive/p3mx/sdram_init.c
@@ -0,0 +1,434 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*************************************************************************
+ * adaption for the Marvell DB64460 Board
+ * Ingo Assmus (ingo.assmus@keymile.com)
+ *************************************************************************/
+
+/* sdram_init.c - automatic memory sizing */
+
+#include <common.h>
+#include <74xx_7xx.h>
+#include "../../Marvell/include/memory.h"
+#include "../../Marvell/include/pci.h"
+#include "../../Marvell/include/mv_gen_reg.h"
+#include <net.h>
+
+#include "eth.h"
+#include "mpsc.h"
+#include "../../Marvell/common/i2c.h"
+#include "64460.h"
+#include "mv_regs.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#undef DEBUG
+#define MAP_PCI
+
+#ifdef DEBUG
+#define DP(x) x
+#else
+#define DP(x)
+#endif
+
+int set_dfcdlInit (void); /* setup delay line of Mv64460 */
+int mvDmaIsChannelActive (int);
+int mvDmaSetMemorySpace (ulong, ulong, ulong, ulong, ulong);
+int mvDmaTransfer (int, ulong, ulong, ulong, ulong);
+
+#define D_CACHE_FLUSH_LINE(addr, offset) \
+ { \
+ __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \
+ }
+
+int memory_map_bank (unsigned int bankNo,
+ unsigned int bankBase, unsigned int bankLength)
+{
+#ifdef MAP_PCI
+ PCI_HOST host;
+#endif
+
+#ifdef DEBUG
+ if (bankLength > 0) {
+ printf ("mapping bank %d at %08x - %08x\n",
+ bankNo, bankBase, bankBase + bankLength - 1);
+ } else {
+ printf ("unmapping bank %d\n", bankNo);
+ }
+#endif
+
+ memoryMapBank (bankNo, bankBase, bankLength);
+
+#ifdef MAP_PCI
+ for (host = PCI_HOST0; host <= PCI_HOST1; host++) {
+ const int features =
+ PREFETCH_ENABLE |
+ DELAYED_READ_ENABLE |
+ AGGRESSIVE_PREFETCH |
+ READ_LINE_AGGRESSIVE_PREFETCH |
+ READ_MULTI_AGGRESSIVE_PREFETCH |
+ MAX_BURST_4 | PCI_NO_SWAP;
+
+ pciMapMemoryBank (host, bankNo, bankBase, bankLength);
+
+ pciSetRegionSnoopMode (host, bankNo, PCI_SNOOP_WB, bankBase,
+ bankLength);
+
+ pciSetRegionFeatures (host, bankNo, features, bankBase,
+ bankLength);
+ }
+#endif
+
+ return 0;
+}
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+long int dram_size (long int *base, long int maxsize)
+{
+ volatile long int *addr, *b = base;
+ long int cnt, val, save1, save2;
+
+#define STARTVAL (1<<20) /* start test at 1M */
+ for (cnt = STARTVAL / sizeof (long); cnt < maxsize / sizeof (long);
+ cnt <<= 1) {
+ addr = base + cnt; /* pointer arith! */
+
+ save1 = *addr; /* save contents of addr */
+ save2 = *b; /* save contents of base */
+
+ *addr = cnt; /* write cnt to addr */
+ *b = 0; /* put null at base */
+
+ /* check at base address */
+ if ((*b) != 0) {
+ *addr = save1; /* restore *addr */
+ *b = save2; /* restore *b */
+ return (0);
+ }
+ val = *addr; /* read *addr */
+ val = *addr; /* read *addr */
+
+ *addr = save1;
+ *b = save2;
+
+ if (val != cnt) {
+ DP (printf
+ ("Found %08x at Address %08x (failure)\n",
+ (unsigned int) val, (unsigned int) addr));
+ /* fix boundary condition.. STARTVAL means zero */
+ if (cnt == STARTVAL / sizeof (long))
+ cnt = 0;
+ return (cnt * sizeof (long));
+ }
+ }
+
+ return maxsize;
+}
+
+#define SDRAM_NORMAL 0x0
+#define SDRAM_PRECHARGE_ALL 0x1
+#define SDRAM_REFRESH_ALL 0x2
+#define SDRAM_MODE_REG_SETUP 0x3
+#define SDRAM_XTEN_MODE_REG_SETUP 0x4
+#define SDRAM_NOP 0x5
+#define SDRAM_SELF_REFRESH 0x7
+
+long int initdram (int board_type)
+{
+ int tmp;
+ int start;
+ ulong size;
+ ulong memSpaceAttr;
+ ulong dest;
+
+ /* first disable all banks */
+ memory_map_bank(0, 0, 0);
+ memory_map_bank(1, 0, 0);
+ memory_map_bank(2, 0, 0);
+ memory_map_bank(3, 0, 0);
+
+ /* calibrate delay lines */
+ set_dfcdlInit();
+
+ GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_NOP); /* 0x1418 */
+ do {
+ tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
+ } while(tmp != 0x0);
+
+ /* SDRAM controller configuration */
+#ifdef CONFIG_MV64460_ECC
+ GT_REG_WRITE(MV64460_SDRAM_CONFIG, 0x58201400); /* 0x1400 */
+#else
+ GT_REG_WRITE(MV64460_SDRAM_CONFIG, 0x58200400); /* 0x1400 */
+#endif
+ GT_REG_WRITE(MV64460_D_UNIT_CONTROL_LOW, 0xC3000540); /* 0x1404 */
+ GT_REG_WRITE(MV64460_D_UNIT_CONTROL_HIGH, 0x0300F777); /* 0x1424 */
+ GT_REG_WRITE(MV64460_SDRAM_TIMING_CONTROL_LOW, 0x01712220); /* 0x1408 */
+ GT_REG_WRITE(MV64460_SDRAM_TIMING_CONTROL_HIGH, 0x0000005D); /* 0x140C */
+ GT_REG_WRITE(MV64460_SDRAM_ADDR_CONTROL, 0x00000012); /* 0x1410 */
+ GT_REG_WRITE(MV64460_SDRAM_OPEN_PAGES_CONTROL, 0x00000001); /* 0x1414 */
+
+ /* SDRAM drive strength */
+ GT_REG_WRITE(MV64460_SDRAM_ADDR_CTRL_PADS_CALIBRATION, 0x80000000); /* 0x14C0 */
+ GT_REG_WRITE(MV64460_SDRAM_ADDR_CTRL_PADS_CALIBRATION, 0x80000008); /* 0x14C0 */
+ GT_REG_WRITE(MV64460_SDRAM_DATA_PADS_CALIBRATION, 0x80000000); /* 0x14C4 */
+ GT_REG_WRITE(MV64460_SDRAM_DATA_PADS_CALIBRATION, 0x80000008); /* 0x14C4 */
+
+ /* setup SDRAM device registers */
+
+ /* precharge all */
+ GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_PRECHARGE_ALL); /* 0x1418 */
+ do {
+ tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
+ } while(tmp != 0x0);
+
+ /* enable DLL */
+ GT_REG_WRITE(MV64460_EXTENDED_DRAM_MODE, 0x00000000); /* 0x1420 */
+ GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_XTEN_MODE_REG_SETUP); /* 0x1418 */
+ do {
+ tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
+ } while(tmp != 0x0);
+
+ /* reset DLL */
+ GT_REG_WRITE(MV64460_SDRAM_MODE, 0x00000132); /* 0x141C */
+ GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_MODE_REG_SETUP); /* 0x1418 */
+ do {
+ tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
+ } while(tmp != 0x0);
+
+ /* precharge all */
+ GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_PRECHARGE_ALL); /* 0x1418 */
+ do {
+ tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
+ } while(tmp != 0x0);
+
+ /* wait for 2 auto refresh commands */
+ udelay(20);
+
+ /* un-reset DLL */
+ GT_REG_WRITE(MV64460_SDRAM_MODE, 0x00000032); /* 0x141C */
+ GT_REG_WRITE(MV64460_SDRAM_OPERATION, SDRAM_MODE_REG_SETUP); /* 0x1418 */
+ do {
+ tmp = GTREGREAD(MV64460_SDRAM_OPERATION);
+ } while(tmp != 0x0);
+
+ /* wait 200 cycles */
+ udelay(2); /* FIXME make this dynamic for the system clock */
+
+ /* SDRAM init done */
+ memory_map_bank(0, CFG_SDRAM_BASE, (256 << 20));
+#ifdef CFG_SDRAM1_BASE
+ memory_map_bank(1, CFG_SDRAM1_BASE, (256 << 20));
+#endif
+
+ /* DUNIT_MMASK: enable SnoopHitEn bit to avoid errata CPU-#4
+ */
+ tmp = GTREGREAD(MV64460_D_UNIT_MMASK); /* 0x14B0 */
+ GT_REG_WRITE(MV64460_D_UNIT_MMASK, tmp | 0x2);
+
+ start = (0 << 20);
+#ifdef CONFIG_P3M750
+ size = (512 << 20);
+#elif defined (CONFIG_P3M7448)
+ size = (128 << 20);
+#endif
+
+#ifdef CONFIG_MV64460_ECC
+ memSpaceAttr = ((~(BIT0 << 0)) & 0xf) << 8;
+ mvDmaSetMemorySpace (0, 0, memSpaceAttr, start, size);
+ for (dest = start; dest < start + size; dest += _8M) {
+ mvDmaTransfer (0, start, dest, _8M,
+ BIT8 /*DMA_DTL_128BYTES */ |
+ BIT3 /*DMA_HOLD_SOURCE_ADDR */ |
+ BIT11 /*DMA_BLOCK_TRANSFER_MODE */ );
+ while (mvDmaIsChannelActive (0));
+ }
+#endif
+
+ return (size);
+}
+
+void board_add_ram_info(int use_default)
+{
+ u32 val;
+
+ puts(" (CL=");
+ switch ((GTREGREAD(MV64460_SDRAM_MODE) >> 4) & 0x7) {
+ case 0x2:
+ puts("2");
+ break;
+ case 0x3:
+ puts("3");
+ break;
+ case 0x5:
+ puts("1.5");
+ break;
+ case 0x6:
+ puts("2.5");
+ break;
+ }
+
+ val = GTREGREAD(MV64460_SDRAM_CONFIG);
+
+ puts(", ECC ");
+ if (val & 0x00001000)
+ puts("enabled)");
+ else
+ puts("not enabled)");
+}
+
+/*
+ * mvDmaIsChannelActive - Check if IDMA channel is active
+ *
+ * channel = IDMA channel number from 0 to 7
+ */
+int mvDmaIsChannelActive (int channel)
+{
+ ulong data;
+
+ data = GTREGREAD (MV64460_DMA_CHANNEL0_CONTROL + 4 * channel);
+ if (data & BIT14) /* activity status */
+ return 1;
+
+ return 0;
+}
+
+/*
+ * mvDmaSetMemorySpace - Set a DMA memory window for the DMA's address decoding
+ * map.
+ *
+ * memSpace = IDMA memory window number from 0 to 7
+ * trg_if = Target interface:
+ * 0x0 DRAM
+ * 0x1 Device Bus
+ * 0x2 Integrated SDRAM (or CPU bus 60x only)
+ * 0x3 PCI0
+ * 0x4 PCI1
+ * attr = IDMA attributes (see MV datasheet)
+ * base_addr = Sets up memory window for transfers
+ *
+ */
+int mvDmaSetMemorySpace (ulong memSpace,
+ ulong trg_if,
+ ulong attr, ulong base_addr, ulong size)
+{
+ ulong temp;
+
+ /* The base address must be aligned to the size. */
+ if (base_addr % size != 0)
+ return 0;
+
+ if (size >= 0x10000) { /* 64K */
+ size &= 0xffff0000;
+ base_addr = (base_addr & 0xffff0000);
+ /* Set the new attributes */
+ GT_REG_WRITE (MV64460_DMA_BASE_ADDR_REG0 + memSpace * 8,
+ (base_addr | trg_if | attr));
+ GT_REG_WRITE ((MV64460_DMA_SIZE_REG0 + memSpace * 8),
+ (size - 1) & 0xffff0000);
+ temp = GTREGREAD (MV64460_DMA_BASE_ADDR_ENABLE_REG);
+ GT_REG_WRITE (DMA_BASE_ADDR_ENABLE_REG,
+ (temp & ~(BIT0 << memSpace)));
+ return 1;
+ }
+
+ return 0;
+}
+
+/*
+ * mvDmaTransfer - Transfer data from src_addr to dst_addr on one of the 4
+ * DMA channels.
+ *
+ * channel = IDMA channel number from 0 to 3
+ * destAddr = Destination address
+ * sourceAddr = Source address
+ * size = Size in bytes
+ * command = See MV datasheet
+ *
+ */
+int mvDmaTransfer (int channel, ulong sourceAddr,
+ ulong destAddr, ulong size, ulong command)
+{
+ ulong engOffReg = 0; /* Engine Offset Register */
+
+ if (size > 0xffff)
+ command = command | BIT31; /* DMA_16M_DESCRIPTOR_MODE */
+ command = command | ((command >> 6) & 0x7);
+ engOffReg = channel * 4;
+ GT_REG_WRITE (MV64460_DMA_CHANNEL0_BYTE_COUNT + engOffReg, size);
+ GT_REG_WRITE (MV64460_DMA_CHANNEL0_SOURCE_ADDR + engOffReg, sourceAddr);
+ GT_REG_WRITE (MV64460_DMA_CHANNEL0_DESTINATION_ADDR + engOffReg, destAddr);
+ command = command |
+ BIT12 | /* DMA_CHANNEL_ENABLE */
+ BIT9; /* DMA_NON_CHAIN_MODE */
+ /* Activate DMA channel By writting to mvDmaControlRegister */
+ GT_REG_WRITE (MV64460_DMA_CHANNEL0_CONTROL + engOffReg, command);
+ return 1;
+}
+
+/****************************************************************************************
+ * SDRAM INIT *
+ * This procedure detect all Sdram types: 64, 128, 256, 512 Mbit, 1Gbit and 2Gb *
+ * This procedure fits only the Atlantis *
+ * *
+ ***************************************************************************************/
+
+/****************************************************************************************
+ * DFCDL initialize MV643xx Design Considerations *
+ * *
+ ***************************************************************************************/
+int set_dfcdlInit (void)
+{
+ int i;
+
+ /* Values from MV64460 User Manual */
+ unsigned int dfcdl_tbl[] = { 0x00000000, 0x00000001, 0x00000042, 0x00000083,
+ 0x000000c4, 0x00000105, 0x00000146, 0x00000187,
+ 0x000001c8, 0x00000209, 0x0000024a, 0x0000028b,
+ 0x000002cc, 0x0000030d, 0x0000034e, 0x0000038f,
+ 0x000003d0, 0x00000411, 0x00000452, 0x00000493,
+ 0x000004d4, 0x00000515, 0x00000556, 0x00000597,
+ 0x000005d8, 0x00000619, 0x0000065a, 0x0000069b,
+ 0x000006dc, 0x0000071d, 0x0000075e, 0x0000079f,
+ 0x000007e0, 0x00000821, 0x00000862, 0x000008a3,
+ 0x000008e4, 0x00000925, 0x00000966, 0x000009a7,
+ 0x000009e8, 0x00000a29, 0x00000a6a, 0x00000aab,
+ 0x00000aec, 0x00000b2d, 0x00000b6e, 0x00000baf,
+ 0x00000bf0, 0x00000c31, 0x00000c72, 0x00000cb3,
+ 0x00000cf4, 0x00000d35, 0x00000d76, 0x00000db7,
+ 0x00000df8, 0x00000e39, 0x00000e7a, 0x00000ebb,
+ 0x00000efc, 0x00000f3d, 0x00000f7e, 0x00000fbf };
+
+ for (i = 0; i < 64; i++)
+ GT_REG_WRITE (SRAM_DATA0, dfcdl_tbl[i]);
+ GT_REG_WRITE (DFCDL_CONFIG0, 0x00300000); /* enable dynamic delay line updating */
+
+ return (0);
+}
diff --git a/board/prodrive/p3mx/serial.c b/board/prodrive/p3mx/serial.c
new file mode 100644
index 0000000..ba32ac1
--- /dev/null
+++ b/board/prodrive/p3mx/serial.c
@@ -0,0 +1,107 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * modified for marvell db64360 eval board by
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ * modified for cpci750 board by
+ * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * serial.c - serial support for esd cpci750 board
+ */
+
+/* supports the MPSC */
+
+#include <common.h>
+#include <command.h>
+#include "../../Marvell/include/memory.h"
+#include "serial.h"
+
+#include "mpsc.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int serial_init (void)
+{
+ mpsc_init (gd->baudrate);
+
+ return (0);
+}
+
+void serial_putc (const char c)
+{
+ if (c == '\n')
+ mpsc_putchar ('\r');
+
+ mpsc_putchar (c);
+}
+
+int serial_getc (void)
+{
+ return mpsc_getchar ();
+}
+
+int serial_tstc (void)
+{
+ return mpsc_test_char ();
+}
+
+void serial_setbrg (void)
+{
+ galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate);
+}
+
+
+void serial_puts (const char *s)
+{
+ while (*s) {
+ serial_putc (*s++);
+ }
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+void kgdb_serial_init (void)
+{
+}
+
+void putDebugChar (int c)
+{
+ serial_putc (c);
+}
+
+void putDebugStr (const char *str)
+{
+ serial_puts (str);
+}
+
+int getDebugChar (void)
+{
+ return serial_getc ();
+}
+
+void kgdb_interruptible (int yes)
+{
+ return;
+}
+#endif /* CFG_CMD_KGDB */
diff --git a/board/prodrive/p3mx/serial.h b/board/prodrive/p3mx/serial.h
new file mode 100644
index 0000000..c7fc8c1
--- /dev/null
+++ b/board/prodrive/p3mx/serial.h
@@ -0,0 +1,89 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * modified for marvell db64360 eval board by
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* serial.h - mostly useful for DUART serial_init in serial.c */
+
+#ifndef __SERIAL_H__
+#define __SERIAL_H__
+
+#if 0
+
+#define B230400 1
+#define B115200 2
+#define B57600 4
+#define B38400 82
+#define B19200 163
+#define B9600 24
+#define B4800 651
+#define B2400 1302
+#define B1200 2604
+#define B600 5208
+#define B300 10417
+#define B150 20833
+#define B110 28409
+#define BDEFAULT B115200
+
+ /* this stuff is important to initialize
+ the DUART channels */
+
+#define Scale 0x01L /* distance between port addresses */
+#define COM1 0x000003f8 /* Keyboard */
+#define COM2 0x000002f8 /* Host */
+
+
+/* Port Definitions relative to base COM port addresses */
+#define DataIn (0x00*Scale) /* data input port */
+#define DataOut (0x00*Scale) /* data output port */
+#define BaudLsb (0x00*Scale) /* baud rate divisor least significant byte */
+#define BaudMsb (0x01*Scale) /* baud rate divisor most significant byte */
+#define Ier (0x01*Scale) /* interrupt enable register */
+#define Iir (0x02*Scale) /* interrupt identification register */
+#define Lcr (0x03*Scale) /* line control register */
+#define Mcr (0x04*Scale) /* modem control register */
+#define Lsr (0x05*Scale) /* line status register */
+#define Msr (0x06*Scale) /* modem status register */
+
+/* Bit Definitions for above ports */
+#define LcrDlab 0x80 /* b7: enable baud rate divisor registers */
+#define LcrDflt 0x03 /* b6-0: no parity, 1 stop, 8 data */
+
+#define McrRts 0x02 /* b1: request to send (I am ready to xmit) */
+#define McrDtr 0x01 /* b0: data terminal ready (I am alive ready to rcv) */
+#define McrDflt (McrRts|McrDtr)
+
+#define LsrTxD 0x6000 /* b5: transmit holding register empty (i.e. xmit OK!)*/
+ /* b6: transmitter empty */
+#define LsrRxD 0x0100 /* b0: received data ready (i.e. got a byte!) */
+
+#define MsrRi 0x0040 /* b6: ring indicator (other guy is ready to rcv) */
+#define MsrDsr 0x0020 /* b5: data set ready (other guy is alive ready to rcv */
+#define MsrCts 0x0010 /* b4: clear to send (other guy is ready to rcv) */
+
+#define IerRda 0xf /* b0: Enable received data available interrupt */
+
+#endif
+
+#endif /* __SERIAL_H__ */
diff --git a/board/prodrive/p3mx/u-boot.lds b/board/prodrive/p3mx/u-boot.lds
new file mode 100644
index 0000000..d89eb6c
--- /dev/null
+++ b/board/prodrive/p3mx/u-boot.lds
@@ -0,0 +1,138 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * u-boot.lds - linker script for U-Boot on the Galileo Eval Board.
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/74xx_7xx/start.o (.text)
+
+/* store the environment in a seperate sector in the boot flash */
+/* . = env_offset; */
+/* common/environment.o(.text) */
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/tqm5200/cam5200_flash.c b/board/tqm5200/cam5200_flash.c
index 1a40633..8c3f62e 100644
--- a/board/tqm5200/cam5200_flash.c
+++ b/board/tqm5200/cam5200_flash.c
@@ -759,7 +759,7 @@
if (flash_info[i].flash_id == FLASH_UNKNOWN) {
printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
- i, size_b[i], size_b[i] << 20);
+ i+1, size_b[i], size_b[i] << 20);
flash_info[i].sector_count = -1;
flash_info[i].size = 0;
}
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index cb57a5e..a4322b6 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -289,7 +289,7 @@
#elif defined(CONFIG_TB5200)
# define CARRIER_NAME "TB5200"
#elif defined(CONFIG_CAM5200)
-# define CARRIER_NAME "Cam5200"
+# define CARRIER_NAME "CAM5200"
#elif defined(CONFIG_FO300)
# define CARRIER_NAME "FO300"
#else
diff --git a/board/tqm834x/pci.c b/board/tqm834x/pci.c
index 5a23e6c..d896f17 100644
--- a/board/tqm834x/pci.c
+++ b/board/tqm834x/pci.c
@@ -69,17 +69,17 @@
pci_init_board(void)
{
volatile immap_t * immr;
- volatile clk8349_t * clk;
- volatile law8349_t * pci_law;
- volatile pot8349_t * pci_pot;
- volatile pcictrl8349_t * pci_ctrl;
- volatile pciconf8349_t * pci_conf;
+ volatile clk83xx_t * clk;
+ volatile law83xx_t * pci_law;
+ volatile pot83xx_t * pci_pot;
+ volatile pcictrl83xx_t * pci_ctrl;
+ volatile pciconf83xx_t * pci_conf;
u16 reg16;
u32 reg32;
struct pci_controller * hose;
- immr = (immap_t *)CFG_IMMRBAR;
- clk = (clk8349_t *)&immr->clk;
+ immr = (immap_t *)CFG_IMMR;
+ clk = (clk83xx_t *)&immr->clk;
pci_law = immr->sysconf.pcilaw;
pci_pot = immr->ios.pot;
pci_ctrl = immr->pci_ctrl;
@@ -186,8 +186,8 @@
hose->region_count = 3;
pci_setup_indirect(hose,
- (CFG_IMMRBAR+0x8300),
- (CFG_IMMRBAR+0x8304));
+ (CFG_IMMR+0x8300),
+ (CFG_IMMR+0x8304));
pci_register_hose(hose);
diff --git a/board/tqm834x/tqm834x.c b/board/tqm834x/tqm834x.c
index 41b34cc..36d901f 100644
--- a/board/tqm834x/tqm834x.c
+++ b/board/tqm834x/tqm834x.c
@@ -69,7 +69,7 @@
static void set_ddr_config(void);
/* Local variable */
-static volatile immap_t *im = (immap_t *)CFG_IMMRBAR;
+static volatile immap_t *im = (immap_t *)CFG_IMMR;
/**************************************************************************
* Board initialzation after relocation to RAM. Used to detect the number
@@ -147,7 +147,7 @@
volatile immap_t * immr;
u32 w, f;
- immr = (immap_t *)CFG_IMMRBAR;
+ immr = (immap_t *)CFG_IMMR;
if (!(immr->reset.rcwh & RCWH_PCIHOST)) {
printf("PCI: NOT in host mode..?!\n");
return 0;
diff --git a/common/Makefile b/common/Makefile
index 07ddc95..0106088 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -41,7 +41,7 @@
cmd_pci.o cmd_pcmcia.o cmd_portio.o \
cmd_reginfo.o cmd_reiser.o cmd_scsi.o cmd_spi.o cmd_universe.o \
cmd_usb.o cmd_vfd.o \
- command.o console.o devices.o dlmalloc.o docecc.o \
+ command.o console.o cyclon2.o devices.o dlmalloc.o docecc.o \
environment.o env_common.o \
env_nand.o env_dataflash.o env_flash.o env_eeprom.o \
env_nvram.o env_nowhere.o \
diff --git a/common/altera.c b/common/altera.c
index ebd5038..06e8a95 100644
--- a/common/altera.c
+++ b/common/altera.c
@@ -50,15 +50,20 @@
{
int ret_val = FPGA_FAIL; /* assume a failure */
- if (!altera_validate (desc, __FUNCTION__)) {
+ if (!altera_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
} else {
switch (desc->family) {
case Altera_ACEX1K:
+ case Altera_CYC2:
#if (CONFIG_FPGA & CFG_ACEX1K)
PRINTF ("%s: Launching the ACEX1K Loader...\n",
__FUNCTION__);
ret_val = ACEX1K_load (desc, buf, bsize);
+#elif (CONFIG_FPGA & CFG_CYCLON2)
+ PRINTF ("%s: Launching the CYCLON II Loader...\n",
+ __FUNCTION__);
+ ret_val = CYC2_load (desc, buf, bsize);
#else
printf ("%s: No support for ACEX1K devices.\n",
__FUNCTION__);
@@ -78,7 +83,7 @@
{
int ret_val = FPGA_FAIL; /* assume a failure */
- if (!altera_validate (desc, __FUNCTION__)) {
+ if (!altera_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
} else {
switch (desc->family) {
@@ -106,13 +111,16 @@
{
int ret_val = FPGA_FAIL;
- if (altera_validate (desc, __FUNCTION__)) {
+ if (altera_validate (desc, (char *)__FUNCTION__)) {
printf ("Family: \t");
switch (desc->family) {
case Altera_ACEX1K:
printf ("ACEX1K\n");
break;
/* Add new family types here */
+ case Altera_CYC2:
+ printf ("CYCLON II\n");
+ break;
default:
printf ("Unknown family type, %d\n", desc->family);
}
@@ -147,8 +155,11 @@
printf ("Device Function Table @ 0x%p\n", desc->iface_fns);
switch (desc->family) {
case Altera_ACEX1K:
+ case Altera_CYC2:
#if (CONFIG_FPGA & CFG_ACEX1K)
ACEX1K_info (desc);
+#elif (CONFIG_FPGA & CFG_CYCLON2)
+ CYC2_info (desc);
#else
/* just in case */
printf ("%s: No support for ACEX1K devices.\n",
@@ -176,7 +187,7 @@
{
int ret_val = FPGA_FAIL; /* assume a failure */
- if (!altera_validate (desc, __FUNCTION__)) {
+ if (!altera_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
} else {
switch (desc->family) {
@@ -188,6 +199,14 @@
__FUNCTION__);
#endif
break;
+ case Altera_CYC2:
+#if (CONFIG_FPGA & CFG_CYCLON2)
+ ret_val = CYC2_reloc (desc, reloc_offset);
+#else
+ printf ("%s: No support for CYCLON II devices.\n",
+ __FUNCTION__);
+#endif
+ break;
/* Add new family types here */
default:
printf ("%s: Unsupported family type, %d\n",
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index 3091a58..7aae8a6 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -833,10 +833,6 @@
printf ("ERROR: flat device tree size does not agree with image\n");
return;
}
-
- } else if (getenv("disable_of") == NULL) {
- printf ("ERROR: bootm needs flat device tree as third argument\n");
- return;
}
#endif
if (!data) {
@@ -913,23 +909,11 @@
SHOW_BOOT_PROGRESS (15);
-#ifndef CONFIG_OF_FLAT_TREE
-
#if defined(CFG_INIT_RAM_LOCK) && !defined(CONFIG_E500)
unlock_ram_in_cache();
#endif
- /*
- * Linux Kernel Parameters:
- * r3: ptr to board info data
- * r4: initrd_start or 0 if no initrd
- * r5: initrd_end - unused if r4 is 0
- * r6: Start of command line string
- * r7: End of command line string
- */
- (*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end);
-
-#else /* CONFIG_OF_FLAT_TREE */
+#ifdef CONFIG_OF_FLAT_TREE
/* move of_flat_tree if needed */
if (of_data) {
ulong of_start, of_len;
@@ -948,30 +932,36 @@
of_start, of_start + of_len - 1);
memmove ((void *)of_start, (void *)of_data, of_len);
}
-
- ft_setup(of_flat_tree, kbd, initrd_start, initrd_end);
- /* ft_dump_blob(of_flat_tree); */
+#endif
-#if defined(CFG_INIT_RAM_LOCK) && !defined(CONFIG_E500)
- unlock_ram_in_cache();
+ /*
+ * Linux Kernel Parameters (passing board info data):
+ * r3: ptr to board info data
+ * r4: initrd_start or 0 if no initrd
+ * r5: initrd_end - unused if r4 is 0
+ * r6: Start of command line string
+ * r7: End of command line string
+ */
+#ifdef CONFIG_OF_FLAT_TREE
+ if (!of_flat_tree) /* no device tree; boot old style */
#endif
+ (*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end);
+ /* does not return */
+
+#ifdef CONFIG_OF_FLAT_TREE
/*
- * Linux Kernel Parameters:
+ * Linux Kernel Parameters (passing device tree):
* r3: ptr to OF flat tree, followed by the board info data
* r4: physical pointer to the kernel itself
* r5: NULL
* r6: NULL
* r7: NULL
*/
- if (getenv("disable_of") != NULL)
- (*kernel) ((bd_t *)of_flat_tree, initrd_start, initrd_end,
- cmd_start, cmd_end);
- else {
- ft_setup(of_flat_tree, kbd, initrd_start, initrd_end);
- /* ft_dump_blob(of_flat_tree); */
- (*kernel) ((bd_t *)of_flat_tree, (ulong)kernel, 0, 0, 0);
- }
-#endif /* CONFIG_OF_FLAT_TREE */
+ ft_setup(of_flat_tree, kbd, initrd_start, initrd_end);
+ /* ft_dump_blob(of_flat_tree); */
+
+ (*kernel) ((bd_t *)of_flat_tree, (ulong)kernel, 0, 0, 0);
+#endif
}
#endif /* CONFIG_PPC */
diff --git a/common/cmd_elf.c b/common/cmd_elf.c
index 1d92bb3..0e3d56f 100644
--- a/common/cmd_elf.c
+++ b/common/cmd_elf.c
@@ -79,7 +79,7 @@
* be either an ELF image or a raw binary. Will attempt to setup the
* bootline and other parameters correctly.
* ====================================================================== */
-int do_bootvx ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_bootvx (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
unsigned long addr; /* Address of image */
unsigned long bootaddr; /* Address to put the bootline */
@@ -96,12 +96,10 @@
* If we don't know where the image is then we're done.
*/
- if ((tmp = getenv ("loadaddr")) != NULL) {
- addr = simple_strtoul (tmp, NULL, 16);
- } else {
- puts ("No load address provided\n");
- return 1;
- }
+ if (argc < 2)
+ addr = load_addr;
+ else
+ addr = simple_strtoul (argv[1], NULL, 16);
#if (CONFIG_COMMANDS & CFG_CMD_NET)
/* Check to see if we need to tftp the image ourselves before starting */
diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c
index 9a01e7d..3444091 100644
--- a/common/cmd_fpga.c
+++ b/common/cmd_fpga.c
@@ -55,6 +55,7 @@
#define FPGA_LOAD 1
#define FPGA_LOADB 2
#define FPGA_DUMP 3
+#define FPGA_LOADMK 4
/* Convert bitstream data and load into the fpga */
int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size)
@@ -251,6 +252,23 @@
rc = fpga_loadbitstream(dev, fpga_data, data_size);
break;
+ case FPGA_LOADMK:
+ {
+ image_header_t header;
+ image_header_t *hdr = &header;
+ ulong data;
+
+ memmove (&header, (char *)fpga_data, sizeof(image_header_t));
+ if (ntohl(hdr->ih_magic) != IH_MAGIC) {
+ puts ("Bad Magic Number\n");
+ return 1;
+ }
+ data = ((ulong)fpga_data + sizeof(image_header_t));
+ data_size = ntohl(hdr->ih_size);
+ rc = fpga_load (dev, (void *)data, data_size);
+ }
+ break;
+
case FPGA_DUMP:
rc = fpga_dump (dev, fpga_data, data_size);
break;
@@ -282,6 +300,8 @@
op = FPGA_LOADB;
} else if (!strcmp ("load", opstr)) {
op = FPGA_LOAD;
+ } else if (!strcmp ("loadmk", opstr)) {
+ op = FPGA_LOADMK;
} else if (!strcmp ("dump", opstr)) {
op = FPGA_DUMP;
}
@@ -299,5 +319,6 @@
"\tinfo\tlist known device information\n"
"\tload\tLoad device from memory buffer\n"
"\tloadb\tLoad device from bitstream buffer (Xilinx devices only)\n"
+ "\tloadmk\tLoad device generated with mkimage\n"
"\tdump\tLoad device to memory buffer\n");
#endif /* CONFIG_FPGA && CONFIG_COMMANDS & CFG_CMD_FPGA */
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index c543bb5..45cfde2 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -101,8 +101,31 @@
static uint i2c_mm_last_addr;
static uint i2c_mm_last_alen;
+/* If only one I2C bus is present, the list of devices to ignore when
+ * the probe command is issued is represented by a 1D array of addresses.
+ * When multiple buses are present, the list is an array of bus-address
+ * pairs. The following macros take care of this */
+
#if defined(CFG_I2C_NOPROBES)
+#if defined(CONFIG_I2C_MULTI_BUS)
+static struct
+{
+ uchar bus;
+ uchar addr;
+} i2c_no_probes[] = CFG_I2C_NOPROBES;
+#define GET_BUS_NUM i2c_get_bus_num()
+#define COMPARE_BUS(b,i) (i2c_no_probes[(i)].bus == (b))
+#define COMPARE_ADDR(a,i) (i2c_no_probes[(i)].addr == (a))
+#define NO_PROBE_ADDR(i) i2c_no_probes[(i)].addr
+#else /* single bus */
static uchar i2c_no_probes[] = CFG_I2C_NOPROBES;
+#define GET_BUS_NUM 0
+#define COMPARE_BUS(b,i) ((b) == 0) /* Make compiler happy */
+#define COMPARE_ADDR(a,i) (i2c_no_probes[(i)] == (a))
+#define NO_PROBE_ADDR(i) i2c_no_probes[(i)]
+#endif /* CONFIG_MULTI_BUS */
+
+#define NUM_ELEMENTS_NOPROBE (sizeof(i2c_no_probes)/sizeof(i2c_no_probes[0]))
#endif
static int
@@ -151,7 +174,7 @@
*/
addr = simple_strtoul(argv[2], NULL, 16);
alen = 1;
- for(j = 0; j < 8; j++) {
+ for (j = 0; j < 8; j++) {
if (argv[2][j] == '.') {
alen = argv[2][j+1] - '0';
if (alen > 4) {
@@ -159,9 +182,8 @@
return 1;
}
break;
- } else if (argv[2][j] == '\0') {
+ } else if (argv[2][j] == '\0')
break;
- }
}
/*
@@ -185,9 +207,9 @@
linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes;
- if(i2c_read(chip, addr, alen, linebuf, linebytes) != 0) {
+ if (i2c_read(chip, addr, alen, linebuf, linebytes) != 0)
puts ("Error reading the chip.\n");
- } else {
+ else {
printf("%04x:", addr);
cp = linebuf;
for (j=0; j<linebytes; j++) {
@@ -256,17 +278,16 @@
*/
addr = simple_strtoul(argv[2], NULL, 16);
alen = 1;
- for(j = 0; j < 8; j++) {
+ for (j = 0; j < 8; j++) {
if (argv[2][j] == '.') {
alen = argv[2][j+1] - '0';
- if(alen > 4) {
+ if (alen > 4) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
break;
- } else if (argv[2][j] == '\0') {
+ } else if (argv[2][j] == '\0')
break;
- }
}
/*
@@ -277,16 +298,14 @@
/*
* Optional count
*/
- if(argc == 5) {
+ if (argc == 5)
count = simple_strtoul(argv[4], NULL, 16);
- } else {
+ else
count = 1;
- }
while (count-- > 0) {
- if(i2c_write(chip, addr++, alen, &byte, 1) != 0) {
+ if (i2c_write(chip, addr++, alen, &byte, 1) != 0)
puts ("Error writing the chip.\n");
- }
/*
* Wait for the write to complete. The write can take
* up to 10mSec (we allow a little more time).
@@ -303,9 +322,9 @@
#endif
#if 0
- for(timeout = 0; timeout < 10; timeout++) {
+ for (timeout = 0; timeout < 10; timeout++) {
udelay(2000);
- if(i2c_probe(chip) == 0)
+ if (i2c_probe(chip) == 0)
break;
}
#endif
@@ -346,17 +365,16 @@
*/
addr = simple_strtoul(argv[2], NULL, 16);
alen = 1;
- for(j = 0; j < 8; j++) {
+ for (j = 0; j < 8; j++) {
if (argv[2][j] == '.') {
alen = argv[2][j+1] - '0';
- if(alen > 4) {
+ if (alen > 4) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
break;
- } else if (argv[2][j] == '\0') {
+ } else if (argv[2][j] == '\0')
break;
- }
}
/*
@@ -371,19 +389,16 @@
*/
crc = 0;
err = 0;
- while(count-- > 0) {
- if(i2c_read(chip, addr, alen, &byte, 1) != 0) {
+ while (count-- > 0) {
+ if (i2c_read(chip, addr, alen, &byte, 1) != 0)
err++;
- }
crc = crc32 (crc, &byte, 1);
addr++;
}
- if(err > 0)
- {
+ if (err > 0)
puts ("Error reading the chip,\n");
- } else {
+ else
printf ("%08lx\n", crc);
- }
return 0;
}
@@ -441,17 +456,16 @@
*/
addr = simple_strtoul(argv[2], NULL, 16);
alen = 1;
- for(j = 0; j < 8; j++) {
+ for (j = 0; j < 8; j++) {
if (argv[2][j] == '.') {
alen = argv[2][j+1] - '0';
- if(alen > 4) {
+ if (alen > 4) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
break;
- } else if (argv[2][j] == '\0') {
+ } else if (argv[2][j] == '\0')
break;
- }
}
}
@@ -461,17 +475,16 @@
*/
do {
printf("%08lx:", addr);
- if(i2c_read(chip, addr, alen, (uchar *)&data, size) != 0) {
+ if (i2c_read(chip, addr, alen, (uchar *)&data, size) != 0)
puts ("\nError reading the chip,\n");
- } else {
+ else {
data = cpu_to_be32(data);
- if(size == 1) {
+ if (size == 1)
printf(" %02lx", (data >> 24) & 0x000000FF);
- } else if(size == 2) {
+ else if (size == 2)
printf(" %04lx", (data >> 16) & 0x0000FFFF);
- } else {
+ else
printf(" %08lx", data);
- }
}
nbytes = readline (" ? ");
@@ -488,19 +501,17 @@
#endif
}
#ifdef CONFIG_BOOT_RETRY_TIME
- else if (nbytes == -2) {
+ else if (nbytes == -2)
break; /* timed out, exit the command */
- }
#endif
else {
char *endp;
data = simple_strtoul(console_buffer, &endp, 16);
- if(size == 1) {
+ if (size == 1)
data = data << 24;
- } else if(size == 2) {
+ else if (size == 2)
data = data << 16;
- }
data = be32_to_cpu(data);
nbytes = endp - console_buffer;
if (nbytes) {
@@ -510,9 +521,8 @@
*/
reset_cmd_timeout();
#endif
- if(i2c_write(chip, addr, alen, (uchar *)&data, size) != 0) {
+ if (i2c_write(chip, addr, alen, (uchar *)&data, size) != 0)
puts ("Error writing the chip.\n");
- }
#ifdef CFG_EEPROM_PAGE_WRITE_DELAY_MS
udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
#endif
@@ -538,14 +548,15 @@
int j;
#if defined(CFG_I2C_NOPROBES)
int k, skip;
-#endif
+ uchar bus = GET_BUS_NUM;
+#endif /* NOPROBES */
puts ("Valid chip addresses:");
- for(j = 0; j < 128; j++) {
+ for (j = 0; j < 128; j++) {
#if defined(CFG_I2C_NOPROBES)
skip = 0;
- for (k = 0; k < sizeof(i2c_no_probes); k++){
- if (j == i2c_no_probes[k]){
+ for (k=0; k < NUM_ELEMENTS_NOPROBE; k++) {
+ if (COMPARE_BUS(bus, k) && COMPARE_ADDR(j, k)) {
skip = 1;
break;
}
@@ -553,16 +564,17 @@
if (skip)
continue;
#endif
- if(i2c_probe(j) == 0) {
+ if (i2c_probe(j) == 0)
printf(" %02X", j);
- }
}
putc ('\n');
#if defined(CFG_I2C_NOPROBES)
puts ("Excluded chip addresses:");
- for( k = 0; k < sizeof(i2c_no_probes); k++ )
- printf(" %02X", i2c_no_probes[k] );
+ for (k=0; k < NUM_ELEMENTS_NOPROBE; k++) {
+ if (COMPARE_BUS(bus,k))
+ printf(" %02X", NO_PROBE_ADDR(k));
+ }
putc ('\n');
#endif
@@ -601,7 +613,7 @@
*/
addr = simple_strtoul(argv[2], NULL, 16);
alen = 1;
- for(j = 0; j < 8; j++) {
+ for (j = 0; j < 8; j++) {
if (argv[2][j] == '.') {
alen = argv[2][j+1] - '0';
if (alen > 4) {
@@ -609,9 +621,8 @@
return 1;
}
break;
- } else if (argv[2][j] == '\0') {
+ } else if (argv[2][j] == '\0')
break;
- }
}
/*
@@ -619,24 +630,21 @@
*/
length = 1;
length = simple_strtoul(argv[3], NULL, 16);
- if(length > sizeof(bytes)) {
+ if (length > sizeof(bytes))
length = sizeof(bytes);
- }
/*
* The delay time (uSec) is optional.
*/
delay = 1000;
- if (argc > 3) {
+ if (argc > 3)
delay = simple_strtoul(argv[4], NULL, 10);
- }
/*
* Run the loop...
*/
- while(1) {
- if(i2c_read(chip, addr, alen, bytes, length) != 0) {
+ while (1) {
+ if (i2c_read(chip, addr, alen, bytes, length) != 0)
puts ("Error reading the chip.\n");
- }
udelay(delay);
}
@@ -671,7 +679,7 @@
*/
chip = simple_strtoul(argv[1], NULL, 16);
- if(i2c_read(chip, 0, 1, data, sizeof(data)) != 0) {
+ if (i2c_read(chip, 0, 1, data, sizeof(data)) != 0) {
puts ("No SDRAM Serial Presence Detect found.\n");
return 1;
}
@@ -680,7 +688,7 @@
for (j = 0; j < 63; j++) {
cksum += data[j];
}
- if(cksum != data[63]) {
+ if (cksum != data[63]) {
printf ("WARNING: Configuration data checksum failure:\n"
" is 0x%02x, calculated 0x%02x\n",
data[63], cksum);
@@ -696,17 +704,15 @@
default: puts ("unknown\n"); break;
}
puts ("Row address bits ");
- if((data[3] & 0x00F0) == 0) {
+ if ((data[3] & 0x00F0) == 0)
printf("%d\n", data[3] & 0x0F);
- } else {
+ else
printf("%d/%d\n", data[3] & 0x0F, (data[3] >> 4) & 0x0F);
- }
puts ("Column address bits ");
- if((data[4] & 0x00F0) == 0) {
+ if ((data[4] & 0x00F0) == 0)
printf("%d\n", data[4] & 0x0F);
- } else {
+ else
printf("%d/%d\n", data[4] & 0x0F, (data[4] >> 4) & 0x0F);
- }
printf("Module rows %d\n", data[5]);
printf("Module data width %d bits\n", (data[7] << 8) | data[6]);
puts ("Interface signal levels ");
@@ -729,11 +735,10 @@
case 2: puts ("ECC\n"); break;
default: puts ("unknown\n"); break;
}
- if((data[12] & 0x80) == 0) {
+ if ((data[12] & 0x80) == 0)
puts ("No self refresh, rate ");
- } else {
+ else
puts ("Self refresh, rate ");
- }
switch(data[12] & 0x7F) {
case 0: puts ("15.625uS\n"); break;
case 1: puts ("3.9uS\n"); break;
@@ -744,17 +749,16 @@
default: puts ("unknown\n"); break;
}
printf("SDRAM width (primary) %d\n", data[13] & 0x7F);
- if((data[13] & 0x80) != 0) {
+ if ((data[13] & 0x80) != 0) {
printf(" (second bank) %d\n",
2 * (data[13] & 0x7F));
}
- if(data[14] != 0) {
+ if (data[14] != 0) {
printf("EDC width %d\n",
data[14] & 0x7F);
- if((data[14] & 0x80) != 0) {
+ if ((data[14] & 0x80) != 0)
printf(" (second bank) %d\n",
2 * (data[14] & 0x7F));
- }
}
printf("Min clock delay, back-to-back random column addresses %d\n",
data[15]);
@@ -852,18 +856,18 @@
(data[35] & 0x80) ? '-' : '+',
(data[35] >> 4) & 0x07, data[35] & 0x0F);
puts ("Manufacturer's JEDEC ID ");
- for(j = 64; j <= 71; j++)
+ for (j = 64; j <= 71; j++)
printf("%02X ", data[j]);
putc ('\n');
printf("Manufacturing Location %02X\n", data[72]);
puts ("Manufacturer's Part Number ");
- for(j = 73; j <= 90; j++)
+ for (j = 73; j <= 90; j++)
printf("%02X ", data[j]);
putc ('\n');
printf("Revision Code %02X %02X\n", data[91], data[92]);
printf("Manufacturing Date %02X %02X\n", data[93], data[94]);
puts ("Assembly Serial Number ");
- for(j = 95; j <= 98; j++)
+ for (j = 95; j <= 98; j++)
printf("%02X ", data[j]);
putc ('\n');
printf("Speed rating PC%d\n",
@@ -873,6 +877,74 @@
}
#endif /* CFG_CMD_SDRAM */
+#if defined(CONFIG_I2C_CMD_TREE)
+#if defined(CONFIG_I2C_MULTI_BUS)
+int do_i2c_bus_num(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ int bus_idx, ret=0;
+
+ if (argc == 1)
+ /* querying current setting */
+ printf("Current bus is %d\n", i2c_get_bus_num());
+ else {
+ bus_idx = simple_strtoul(argv[1], NULL, 10);
+ printf("Setting bus to %d\n", bus_idx);
+ ret = i2c_set_bus_num(bus_idx);
+ if (ret)
+ printf("Failure changing bus number (%d)\n", ret);
+ }
+ return ret;
+}
+#endif /* CONFIG_I2C_MULTI_BUS */
+
+int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ int speed, ret=0;
+
+ if (argc == 1)
+ /* querying current speed */
+ printf("Current bus speed=%d\n", i2c_get_bus_speed());
+ else {
+ speed = simple_strtoul(argv[1], NULL, 10);
+ printf("Setting bus speed to %d Hz\n", speed);
+ ret = i2c_set_bus_speed(speed);
+ if (ret)
+ printf("Failure changing bus speed (%d)\n", ret);
+ }
+ return ret;
+}
+
+int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+#if defined(CONFIG_I2C_MULTI_BUS)
+ if (!strncmp(argv[1], "de", 2))
+ return do_i2c_bus_num(cmdtp, flag, --argc, ++argv);
+#endif /* CONFIG_I2C_MULTI_BUS */
+ if (!strncmp(argv[1], "sp", 2))
+ return do_i2c_bus_speed(cmdtp, flag, --argc, ++argv);
+ if (!strncmp(argv[1], "md", 2))
+ return do_i2c_md(cmdtp, flag, --argc, ++argv);
+ if (!strncmp(argv[1], "mm", 2))
+ return do_i2c_mm(cmdtp, flag, --argc, ++argv);
+ if (!strncmp(argv[1], "mw", 2))
+ return do_i2c_mw(cmdtp, flag, --argc, ++argv);
+ if (!strncmp(argv[1], "nm", 2))
+ return do_i2c_nm(cmdtp, flag, --argc, ++argv);
+ if (!strncmp(argv[1], "cr", 2))
+ return do_i2c_crc(cmdtp, flag, --argc, ++argv);
+ if (!strncmp(argv[1], "pr", 2))
+ return do_i2c_probe(cmdtp, flag, --argc, ++argv);
+ if (!strncmp(argv[1], "lo", 2))
+ return do_i2c_loop(cmdtp, flag, --argc, ++argv);
+#if (CONFIG_COMMANDS & CFG_CMD_SDRAM)
+ if (!strncmp(argv[1], "sd", 2))
+ return do_sdram(cmdtp, flag, --argc, ++argv);
+#endif /* CFG_CMD_SDRAM */
+ else
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 0;
+}
+#endif /* CONFIG_I2C_CMD_TREE */
/***************************************************/
@@ -930,4 +1002,26 @@
" (valid chip values 50..57)\n"
);
#endif
+
+#if defined(CONFIG_I2C_CMD_TREE)
+U_BOOT_CMD(
+ i2c, 6, 1, do_i2c,
+ "i2c - I2C sub-system\n",
+#if defined(CONFIG_I2C_MULTI_BUS)
+ "dev [dev] - show or set current I2C bus\n"
+#endif /* CONFIG_I2C_MULTI_BUS */
+ "i2c speed [speed] - show or set I2C bus speed\n"
+ "i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device\n"
+ "i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)\n"
+ "i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n"
+ "i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n"
+ "i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
+ "i2c probe - show devices on the I2C bus\n"
+ "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n"
+#if (CONFIG_COMMANDS & CFG_CMD_SDRAM)
+ "i2c sdram chip - print SDRAM configuration information\n"
+#endif /* CFG_CMD_SDRAM */
+);
+#endif /* CONFIG_I2C_CMD_TREE */
+
#endif /* CFG_CMD_I2C */
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index 7286726..b011b5e 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -684,178 +684,182 @@
size_t len, size_t *retlen, const u_char *buf);
-int do_nand (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_nand (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
- int rcode = 0;
+ int rcode = 0;
- switch (argc) {
- case 0:
- case 1:
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
- case 2:
- if (strcmp(argv[1],"info") == 0) {
- int i;
-
- putc ('\n');
+ switch (argc) {
+ case 0:
+ case 1:
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ case 2:
+ if (strcmp (argv[1], "info") == 0) {
+ int i;
- for (i=0; i<CFG_MAX_NAND_DEVICE; ++i) {
- if(nand_dev_desc[i].ChipID == NAND_ChipID_UNKNOWN)
- continue; /* list only known devices */
- printf ("Device %d: ", i);
- nand_print(&nand_dev_desc[i]);
- }
- return 0;
+ putc ('\n');
- } else if (strcmp(argv[1],"device") == 0) {
- if ((curr_device < 0) || (curr_device >= CFG_MAX_NAND_DEVICE)) {
- puts ("\nno devices available\n");
- return 1;
- }
- printf ("\nDevice %d: ", curr_device);
- nand_print(&nand_dev_desc[curr_device]);
- return 0;
+ for (i = 0; i < CFG_MAX_NAND_DEVICE; ++i) {
+ if (nand_dev_desc[i].ChipID ==
+ NAND_ChipID_UNKNOWN)
+ continue; /* list only known devices */
+ printf ("Device %d: ", i);
+ nand_print (&nand_dev_desc[i]);
+ }
+ return 0;
- } else if (strcmp(argv[1],"bad") == 0) {
- if ((curr_device < 0) || (curr_device >= CFG_MAX_NAND_DEVICE)) {
- puts ("\nno devices available\n");
- return 1;
- }
- printf ("\nDevice %d bad blocks:\n", curr_device);
- nand_print_bad(&nand_dev_desc[curr_device]);
- return 0;
+ } else if (strcmp (argv[1], "device") == 0) {
+ if ((curr_device < 0)
+ || (curr_device >= CFG_MAX_NAND_DEVICE)) {
+ puts ("\nno devices available\n");
+ return 1;
+ }
+ printf ("\nDevice %d: ", curr_device);
+ nand_print (&nand_dev_desc[curr_device]);
+ return 0;
- }
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
- case 3:
- if (strcmp(argv[1],"device") == 0) {
- int dev = (int)simple_strtoul(argv[2], NULL, 10);
+ } else if (strcmp (argv[1], "bad") == 0) {
+ if ((curr_device < 0)
+ || (curr_device >= CFG_MAX_NAND_DEVICE)) {
+ puts ("\nno devices available\n");
+ return 1;
+ }
+ printf ("\nDevice %d bad blocks:\n", curr_device);
+ nand_print_bad (&nand_dev_desc[curr_device]);
+ return 0;
- printf ("\nDevice %d: ", dev);
- if (dev >= CFG_MAX_NAND_DEVICE) {
- puts ("unknown device\n");
- return 1;
}
- nand_print(&nand_dev_desc[dev]);
- /*nand_print (dev);*/
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ case 3:
+ if (strcmp (argv[1], "device") == 0) {
+ int dev = (int) simple_strtoul (argv[2], NULL, 10);
- if (nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN) {
- return 1;
- }
+ printf ("\nDevice %d: ", dev);
+ if (dev >= CFG_MAX_NAND_DEVICE) {
+ puts ("unknown device\n");
+ return 1;
+ }
+ nand_print (&nand_dev_desc[dev]);
+ /*nand_print (dev); */
- curr_device = dev;
+ if (nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN) {
+ return 1;
+ }
- puts ("... is now current device\n");
+ curr_device = dev;
- return 0;
- }
- else if (strcmp(argv[1],"erase") == 0 && strcmp(argv[2], "clean") == 0) {
- struct nand_chip* nand = &nand_dev_desc[curr_device];
- ulong off = 0;
- ulong size = nand->totlen;
- int ret;
+ puts ("... is now current device\n");
- printf ("\nNAND erase: device %d offset %ld, size %ld ... ",
- curr_device, off, size);
+ return 0;
+ } else if (strcmp (argv[1], "erase") == 0
+ && strcmp (argv[2], "clean") == 0) {
+ struct nand_chip *nand = &nand_dev_desc[curr_device];
+ ulong off = 0;
+ ulong size = nand->totlen;
+ int ret;
- ret = nand_legacy_erase (nand, off, size, 1);
+ printf ("\nNAND erase: device %d offset %ld, size %ld ... ", curr_device, off, size);
- printf("%s\n", ret ? "ERROR" : "OK");
+ ret = nand_legacy_erase (nand, off, size, 1);
- return ret;
- }
+ printf ("%s\n", ret ? "ERROR" : "OK");
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
- default:
- /* at least 4 args */
+ return ret;
+ }
- if (strncmp(argv[1], "read", 4) == 0 ||
- strncmp(argv[1], "write", 5) == 0) {
- ulong addr = simple_strtoul(argv[2], NULL, 16);
- ulong off = simple_strtoul(argv[3], NULL, 16);
- ulong size = simple_strtoul(argv[4], NULL, 16);
- int cmd = (strncmp(argv[1], "read", 4) == 0) ?
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ default:
+ /* at least 4 args */
+
+ if (strncmp (argv[1], "read", 4) == 0 ||
+ strncmp (argv[1], "write", 5) == 0) {
+ ulong addr = simple_strtoul (argv[2], NULL, 16);
+ ulong off = simple_strtoul (argv[3], NULL, 16);
+ ulong size = simple_strtoul (argv[4], NULL, 16);
+ int cmd = (strncmp (argv[1], "read", 4) == 0) ?
NANDRW_READ : NANDRW_WRITE;
- int ret, total;
- char* cmdtail = strchr(argv[1], '.');
+ int ret, total;
+ char *cmdtail = strchr (argv[1], '.');
- if (cmdtail && !strncmp(cmdtail, ".oob", 2)) {
- /* read out-of-band data */
- if (cmd & NANDRW_READ) {
- ret = nand_read_oob(nand_dev_desc + curr_device,
- off, size, (size_t *)&total,
- (u_char*)addr);
+ if (cmdtail && !strncmp (cmdtail, ".oob", 2)) {
+ /* read out-of-band data */
+ if (cmd & NANDRW_READ) {
+ ret = nand_read_oob (nand_dev_desc + curr_device,
+ off, size, (size_t *) & total,
+ (u_char *) addr);
+ } else {
+ ret = nand_write_oob (nand_dev_desc + curr_device,
+ off, size, (size_t *) & total,
+ (u_char *) addr);
+ }
+ return ret;
+ } else if (cmdtail && !strncmp (cmdtail, ".jffs2", 2))
+ cmd |= NANDRW_JFFS2; /* skip bad blocks */
+ else if (cmdtail && !strncmp (cmdtail, ".jffs2s", 2)) {
+ cmd |= NANDRW_JFFS2; /* skip bad blocks (on read too) */
+ if (cmd & NANDRW_READ)
+ cmd |= NANDRW_JFFS2_SKIP; /* skip bad blocks (on read too) */
}
- else {
- ret = nand_write_oob(nand_dev_desc + curr_device,
- off, size, (size_t *)&total,
- (u_char*)addr);
- }
- return ret;
- }
- else if (cmdtail && !strncmp(cmdtail, ".jffs2", 2))
- cmd |= NANDRW_JFFS2; /* skip bad blocks */
- else if (cmdtail && !strncmp(cmdtail, ".jffs2s", 2)) {
- cmd |= NANDRW_JFFS2; /* skip bad blocks (on read too) */
- if (cmd & NANDRW_READ)
- cmd |= NANDRW_JFFS2_SKIP; /* skip bad blocks (on read too) */
- }
#ifdef SXNI855T
- /* need ".e" same as ".j" for compatibility with older units */
- else if (cmdtail && !strcmp(cmdtail, ".e"))
- cmd |= NANDRW_JFFS2; /* skip bad blocks */
+ /* need ".e" same as ".j" for compatibility with older units */
+ else if (cmdtail && !strcmp (cmdtail, ".e"))
+ cmd |= NANDRW_JFFS2; /* skip bad blocks */
#endif
#ifdef CFG_NAND_SKIP_BAD_DOT_I
- /* need ".i" same as ".jffs2s" for compatibility with older units (esd) */
- /* ".i" for image -> read skips bad block (no 0xff) */
- else if (cmdtail && !strcmp(cmdtail, ".i")) {
- cmd |= NANDRW_JFFS2; /* skip bad blocks (on read too) */
- if (cmd & NANDRW_READ)
- cmd |= NANDRW_JFFS2_SKIP; /* skip bad blocks (on read too) */
- }
+ /* need ".i" same as ".jffs2s" for compatibility with older units (esd) */
+ /* ".i" for image -> read skips bad block (no 0xff) */
+ else if (cmdtail && !strcmp (cmdtail, ".i")) {
+ cmd |= NANDRW_JFFS2; /* skip bad blocks (on read too) */
+ if (cmd & NANDRW_READ)
+ cmd |= NANDRW_JFFS2_SKIP; /* skip bad blocks (on read too) */
+ }
#endif /* CFG_NAND_SKIP_BAD_DOT_I */
- else if (cmdtail) {
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
+ else if (cmdtail) {
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
- printf ("\nNAND %s: device %d offset %ld, size %ld ...\n",
- (cmd & NANDRW_READ) ? "read" : "write",
- curr_device, off, size);
+ printf ("\nNAND %s: device %d offset %ld, size %ld ...\n",
+ (cmd & NANDRW_READ) ? "read" : "write",
+ curr_device, off, size);
- ret = nand_legacy_rw(nand_dev_desc + curr_device, cmd, off, size,
- (size_t *)&total, (u_char*)addr);
+ ret = nand_legacy_rw (nand_dev_desc + curr_device,
+ cmd, off, size,
+ (size_t *) & total,
+ (u_char *) addr);
- printf (" %d bytes %s: %s\n", total,
- (cmd & NANDRW_READ) ? "read" : "written",
- ret ? "ERROR" : "OK");
+ printf (" %d bytes %s: %s\n", total,
+ (cmd & NANDRW_READ) ? "read" : "written",
+ ret ? "ERROR" : "OK");
- return ret;
- } else if (strcmp(argv[1],"erase") == 0 &&
- (argc == 4 || strcmp("clean", argv[2]) == 0)) {
- int clean = argc == 5;
- ulong off = simple_strtoul(argv[2 + clean], NULL, 16);
- ulong size = simple_strtoul(argv[3 + clean], NULL, 16);
- int ret;
+ return ret;
+ } else if (strcmp (argv[1], "erase") == 0 &&
+ (argc == 4 || strcmp ("clean", argv[2]) == 0)) {
+ int clean = argc == 5;
+ ulong off =
+ simple_strtoul (argv[2 + clean], NULL, 16);
+ ulong size =
+ simple_strtoul (argv[3 + clean], NULL, 16);
+ int ret;
- printf ("\nNAND erase: device %d offset %ld, size %ld ...\n",
- curr_device, off, size);
+ printf ("\nNAND erase: device %d offset %ld, size %ld ...\n",
+ curr_device, off, size);
- ret = nand_legacy_erase (nand_dev_desc + curr_device,
- off, size, clean);
+ ret = nand_legacy_erase (nand_dev_desc + curr_device,
+ off, size, clean);
- printf("%s\n", ret ? "ERROR" : "OK");
+ printf ("%s\n", ret ? "ERROR" : "OK");
- return ret;
- } else {
- printf ("Usage:\n%s\n", cmdtp->usage);
- rcode = 1;
- }
+ return ret;
+ } else {
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ rcode = 1;
+ }
- return rcode;
- }
+ return rcode;
+ }
}
U_BOOT_CMD(
diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c
index d3f50f8..9834ba6 100644
--- a/common/cmd_nvedit.c
+++ b/common/cmd_nvedit.c
@@ -248,7 +248,7 @@
baudrate);
udelay(50000);
gd->baudrate = baudrate;
-#ifdef CONFIG_PPC
+#if defined(CONFIG_PPC) || defined(CONFIG_MCF52x2)
gd->bd->bi_baudrate = baudrate;
#endif
diff --git a/common/cyclon2.c b/common/cyclon2.c
new file mode 100644
index 0000000..dce13b5
--- /dev/null
+++ b/common/cyclon2.c
@@ -0,0 +1,305 @@
+/*
+ * (C) Copyright 2006
+ * Heiko Schocher, hs@denx.de
+ * Based on ACE1XK.c
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h> /* core U-Boot definitions */
+#include <altera.h>
+#include <ACEX1K.h> /* ACEX device family */
+
+#if (CONFIG_FPGA & (CFG_ALTERA | CFG_CYCLON2))
+
+/* Define FPGA_DEBUG to get debug printf's */
+#ifdef FPGA_DEBUG
+#define PRINTF(fmt,args...) printf (fmt ,##args)
+#else
+#define PRINTF(fmt,args...)
+#endif
+
+/* Note: The assumption is that we cannot possibly run fast enough to
+ * overrun the device (the Slave Parallel mode can free run at 50MHz).
+ * If there is a need to operate slower, define CONFIG_FPGA_DELAY in
+ * the board config file to slow things down.
+ */
+#ifndef CONFIG_FPGA_DELAY
+#define CONFIG_FPGA_DELAY()
+#endif
+
+#ifndef CFG_FPGA_WAIT
+#define CFG_FPGA_WAIT CFG_HZ/10 /* 100 ms */
+#endif
+
+static int CYC2_ps_load( Altera_desc *desc, void *buf, size_t bsize );
+static int CYC2_ps_dump( Altera_desc *desc, void *buf, size_t bsize );
+/* static int CYC2_ps_info( Altera_desc *desc ); */
+static int CYC2_ps_reloc( Altera_desc *desc, ulong reloc_offset );
+
+/* ------------------------------------------------------------------------- */
+/* CYCLON2 Generic Implementation */
+int CYC2_load (Altera_desc * desc, void *buf, size_t bsize)
+{
+ int ret_val = FPGA_FAIL;
+
+ switch (desc->iface) {
+ case passive_serial:
+ PRINTF ("%s: Launching Passive Serial Loader\n", __FUNCTION__);
+ ret_val = CYC2_ps_load (desc, buf, bsize);
+ break;
+
+ /* Add new interface types here */
+
+ default:
+ printf ("%s: Unsupported interface type, %d\n",
+ __FUNCTION__, desc->iface);
+ }
+
+ return ret_val;
+}
+
+int CYC2_dump (Altera_desc * desc, void *buf, size_t bsize)
+{
+ int ret_val = FPGA_FAIL;
+
+ switch (desc->iface) {
+ case passive_serial:
+ PRINTF ("%s: Launching Passive Serial Dump\n", __FUNCTION__);
+ ret_val = CYC2_ps_dump (desc, buf, bsize);
+ break;
+
+ /* Add new interface types here */
+
+ default:
+ printf ("%s: Unsupported interface type, %d\n",
+ __FUNCTION__, desc->iface);
+ }
+
+ return ret_val;
+}
+
+int CYC2_info( Altera_desc *desc )
+{
+ return FPGA_SUCCESS;
+}
+
+int CYC2_reloc (Altera_desc * desc, ulong reloc_offset)
+{
+ int ret_val = FPGA_FAIL; /* assume a failure */
+
+ if (desc->family != Altera_CYC2) {
+ printf ("%s: Unsupported family type, %d\n",
+ __FUNCTION__, desc->family);
+ return FPGA_FAIL;
+ } else
+ switch (desc->iface) {
+ case passive_serial:
+ ret_val = CYC2_ps_reloc (desc, reloc_offset);
+ break;
+
+ /* Add new interface types here */
+
+ default:
+ printf ("%s: Unsupported interface type, %d\n",
+ __FUNCTION__, desc->iface);
+ }
+
+ return ret_val;
+}
+
+/* ------------------------------------------------------------------------- */
+/* CYCLON2 Passive Serial Generic Implementation */
+static int CYC2_ps_load (Altera_desc * desc, void *buf, size_t bsize)
+{
+ int ret_val = FPGA_FAIL; /* assume the worst */
+ Altera_CYC2_Passive_Serial_fns *fn = desc->iface_fns;
+ int ret = 0;
+
+ PRINTF ("%s: start with interface functions @ 0x%p\n",
+ __FUNCTION__, fn);
+
+ if (fn) {
+ int cookie = desc->cookie; /* make a local copy */
+ unsigned long ts; /* timestamp */
+
+ PRINTF ("%s: Function Table:\n"
+ "ptr:\t0x%p\n"
+ "struct: 0x%p\n"
+ "config:\t0x%p\n"
+ "status:\t0x%p\n"
+ "write:\t0x%p\n"
+ "done:\t0x%p\n\n",
+ __FUNCTION__, &fn, fn, fn->config, fn->status,
+ fn->write, fn->done);
+#ifdef CFG_FPGA_PROG_FEEDBACK
+ printf ("Loading FPGA Device %d...", cookie);
+#endif
+
+ /*
+ * Run the pre configuration function if there is one.
+ */
+ if (*fn->pre) {
+ (*fn->pre) (cookie);
+ }
+
+ /* Establish the initial state */
+ (*fn->config) (TRUE, TRUE, cookie); /* Assert nCONFIG */
+
+ udelay(2); /* T_cfg > 2us */
+
+ /* Wait for nSTATUS to be asserted */
+ ts = get_timer (0); /* get current time */
+ do {
+ CONFIG_FPGA_DELAY ();
+ if (get_timer (ts) > CFG_FPGA_WAIT) { /* check the time */
+ puts ("** Timeout waiting for STATUS to go high.\n");
+ (*fn->abort) (cookie);
+ return FPGA_FAIL;
+ }
+ } while (!(*fn->status) (cookie));
+
+ /* Get ready for the burn */
+ CONFIG_FPGA_DELAY ();
+
+ ret = (*fn->write) (buf, bsize, TRUE, cookie);
+ if (ret) {
+ puts ("** Write failed.\n");
+ (*fn->abort) (cookie);
+ return FPGA_FAIL;
+ }
+#ifdef CFG_FPGA_PROG_FEEDBACK
+ puts(" OK? ...");
+#endif
+
+ CONFIG_FPGA_DELAY ();
+
+#ifdef CFG_FPGA_PROG_FEEDBACK
+ putc (' '); /* terminate the dotted line */
+#endif
+
+ /*
+ * Checking FPGA's CONF_DONE signal - correctly booted ?
+ */
+
+ if ( ! (*fn->done) (cookie) ) {
+ puts ("** Booting failed! CONF_DONE is still deasserted.\n");
+ (*fn->abort) (cookie);
+ return (FPGA_FAIL);
+ }
+#ifdef CFG_FPGA_PROG_FEEDBACK
+ puts(" OK\n");
+#endif
+
+ ret_val = FPGA_SUCCESS;
+
+#ifdef CFG_FPGA_PROG_FEEDBACK
+ if (ret_val == FPGA_SUCCESS) {
+ puts ("Done.\n");
+ }
+ else {
+ puts ("Fail.\n");
+ }
+#endif
+ (*fn->post) (cookie);
+
+ } else {
+ printf ("%s: NULL Interface function table!\n", __FUNCTION__);
+ }
+
+ return ret_val;
+}
+
+static int CYC2_ps_dump (Altera_desc * desc, void *buf, size_t bsize)
+{
+ /* Readback is only available through the Slave Parallel and */
+ /* boundary-scan interfaces. */
+ printf ("%s: Passive Serial Dumping is unavailable\n",
+ __FUNCTION__);
+ return FPGA_FAIL;
+}
+
+static int CYC2_ps_reloc (Altera_desc * desc, ulong reloc_offset)
+{
+ int ret_val = FPGA_FAIL; /* assume the worst */
+ Altera_CYC2_Passive_Serial_fns *fn_r, *fn =
+ (Altera_CYC2_Passive_Serial_fns *) (desc->iface_fns);
+
+ if (fn) {
+ ulong addr;
+
+ /* Get the relocated table address */
+ addr = (ulong) fn + reloc_offset;
+ fn_r = (Altera_CYC2_Passive_Serial_fns *) addr;
+
+ if (!fn_r->relocated) {
+
+ if (memcmp (fn_r, fn,
+ sizeof (Altera_CYC2_Passive_Serial_fns))
+ == 0) {
+ /* good copy of the table, fix the descriptor pointer */
+ desc->iface_fns = fn_r;
+ } else {
+ PRINTF ("%s: Invalid function table at 0x%p\n",
+ __FUNCTION__, fn_r);
+ return FPGA_FAIL;
+ }
+
+ PRINTF ("%s: Relocating descriptor at 0x%p\n", __FUNCTION__,
+ desc);
+
+ addr = (ulong) (fn->pre) + reloc_offset;
+ fn_r->pre = (Altera_pre_fn) addr;
+
+ addr = (ulong) (fn->config) + reloc_offset;
+ fn_r->config = (Altera_config_fn) addr;
+
+ addr = (ulong) (fn->status) + reloc_offset;
+ fn_r->status = (Altera_status_fn) addr;
+
+ addr = (ulong) (fn->done) + reloc_offset;
+ fn_r->done = (Altera_done_fn) addr;
+
+ addr = (ulong) (fn->write) + reloc_offset;
+ fn_r->write = (Altera_write_fn) addr;
+
+ addr = (ulong) (fn->abort) + reloc_offset;
+ fn_r->abort = (Altera_abort_fn) addr;
+
+ addr = (ulong) (fn->post) + reloc_offset;
+ fn_r->post = (Altera_post_fn) addr;
+
+ fn_r->relocated = TRUE;
+
+ } else {
+ /* this table has already been moved */
+ /* XXX - should check to see if the descriptor is correct */
+ desc->iface_fns = fn_r;
+ }
+
+ ret_val = FPGA_SUCCESS;
+ } else {
+ printf ("%s: NULL Interface function table!\n", __FUNCTION__);
+ }
+
+ return ret_val;
+}
+
+#endif /* (CONFIG_FPGA & (CFG_ALTERA | CFG_CYCLON2)) */
diff --git a/common/environment.c b/common/environment.c
index 19bdeb0..1d425a7 100644
--- a/common/environment.c
+++ b/common/environment.c
@@ -61,6 +61,7 @@
defined(CONFIG_TRAB) || \
defined(CONFIG_PPCHAMELEONEVB) || \
defined(CONFIG_M5271EVB) || \
+ defined(CONFIG_IDMR) || \
defined(CONFIG_NAND_U_BOOT)) && \
defined(ENV_CRC) /* Environment embedded in U-Boot .ppcenv section */
/* XXX - This only works with GNU C */
diff --git a/common/fpga.c b/common/fpga.c
index 02d3e42..2eff239 100644
--- a/common/fpga.c
+++ b/common/fpga.c
@@ -139,7 +139,7 @@
printf( "Xilinx Device\nDescriptor @ 0x%p\n", desc );
ret_val = xilinx_info( desc->devdesc );
#else
- fpga_no_sup( __FUNCTION__, "Xilinx devices" );
+ fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
@@ -178,7 +178,7 @@
#if CONFIG_FPGA & CFG_FPGA_XILINX
ret_val = xilinx_reloc( desc, reloc_off );
#else
- fpga_no_sup( __FUNCTION__, "Xilinx devices" );
+ fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
@@ -271,7 +271,7 @@
#if CONFIG_FPGA & CFG_FPGA_XILINX
ret_val = xilinx_load( desc->devdesc, buf, bsize );
#else
- fpga_no_sup( __FUNCTION__, "Xilinx devices" );
+ fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
@@ -304,7 +304,7 @@
#if CONFIG_FPGA & CFG_FPGA_XILINX
ret_val = xilinx_dump( desc->devdesc, buf, bsize );
#else
- fpga_no_sup( __FUNCTION__, "Xilinx devices" );
+ fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
diff --git a/common/memsize.c b/common/memsize.c
index dbc812d..6c275c9 100644
--- a/common/memsize.c
+++ b/common/memsize.c
@@ -21,6 +21,16 @@
* MA 02111-1307 USA
*/
+#include <config.h>
+#ifdef __PPC__
+/*
+ * At least on G2 PowerPC cores, sequential accesses to non-existent
+ * memory must be synchronized.
+ */
+# include <asm/io.h> /* for sync() */
+#else
+# define sync() /* nothing */
+#endif
/*
* Check memory range for valid RAM. A simple memory test determines
@@ -38,20 +48,27 @@
for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) {
addr = base + cnt; /* pointer arith! */
+ sync ();
save[i++] = *addr;
+ sync ();
*addr = ~cnt;
}
addr = base;
+ sync ();
save[i] = *addr;
+ sync ();
*addr = 0;
+ sync ();
if ((val = *addr) != 0) {
/* Restore the original data before leaving the function.
*/
+ sync ();
*addr = save[i];
for (cnt = 1; cnt < maxsize / sizeof(long); cnt <<= 1) {
addr = base + cnt;
+ sync ();
*addr = save[--i];
}
return (0);
diff --git a/cpu/74xx_7xx/cpu.c b/cpu/74xx_7xx/cpu.c
index ca45e17..f4e5fc5 100644
--- a/cpu/74xx_7xx/cpu.c
+++ b/cpu/74xx_7xx/cpu.c
@@ -101,6 +101,10 @@
type = CPU_7457;
break;
+ case 0x8004:
+ type = CPU_7448;
+ break;
+
default:
break;
}
@@ -152,6 +156,10 @@
str = "MPC7410";
break;
+ case CPU_7448:
+ str = "MPC7448";
+ break;
+
case CPU_7450:
str = "MPC7450";
break;
@@ -221,7 +229,7 @@
void
do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
- ulong addr;
+ ulong addr;
/* flush and disable I/D cache */
__asm__ __volatile__ ("mfspr 3, 1008" ::: "r3");
__asm__ __volatile__ ("ori 5, 5, 0xcc00" ::: "r5");
diff --git a/cpu/74xx_7xx/cpu_init.c b/cpu/74xx_7xx/cpu_init.c
index 93f180f..e02a4cc 100644
--- a/cpu/74xx_7xx/cpu_init.c
+++ b/cpu/74xx_7xx/cpu_init.c
@@ -43,6 +43,7 @@
case CPU_7450:
case CPU_7455:
case CPU_7457:
+ case CPU_7448:
/* enable the timebase bit in HID0 */
set_hid0(get_hid0() | 0x4000000);
break;
diff --git a/cpu/74xx_7xx/speed.c b/cpu/74xx_7xx/speed.c
index 2dc5107..d1800ed 100644
--- a/cpu/74xx_7xx/speed.c
+++ b/cpu/74xx_7xx/speed.c
@@ -91,6 +91,7 @@
/* calculate the clock frequency based upon the CPU type */
switch (get_cpu_type()) {
+ case CPU_7448:
case CPU_7455:
case CPU_7457:
/*
diff --git a/cpu/74xx_7xx/start.S b/cpu/74xx_7xx/start.S
index 1fc0fe6..1143038 100644
--- a/cpu/74xx_7xx/start.S
+++ b/cpu/74xx_7xx/start.S
@@ -44,7 +44,8 @@
#if !defined(CONFIG_DB64360) && \
!defined(CONFIG_DB64460) && \
- !defined(CONFIG_CPCI750)
+ !defined(CONFIG_CPCI750) && \
+ !defined(CONFIG_P3Mx)
#include <galileo/gt64260R.h>
#endif
@@ -270,7 +271,7 @@
* gt-regs BAT can be reused after board_init_f calls
* board_early_init_f (EVB only).
*/
-#if !defined(CONFIG_BAB7xx) && !defined(CONFIG_ELPPC)
+#if !defined(CONFIG_BAB7xx) && !defined(CONFIG_ELPPC) && !defined(CONFIG_P3Mx)
/* enable address translation */
bl enable_addr_trans
sync
@@ -757,7 +758,8 @@
defined(CONFIG_DB64360) || \
defined(CONFIG_DB64460) || \
defined(CONFIG_CPCI750) || \
- defined(CONFIG_PPMC7XX)
+ defined(CONFIG_PPMC7XX) || \
+ defined(CONFIG_P3Mx)
mr r4, r9 /* Use RAM copy of the global data */
#endif
bl after_reloc
diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S
index f1f4077..7c9a7d2 100644
--- a/cpu/mcf52x2/start.S
+++ b/cpu/mcf52x2/start.S
@@ -140,11 +140,11 @@
move.l #(CFG_MBAR + 1), %d0 /* set IPSBAR address + valid flag */
move.l %d0, 0x40000000
-#if defined(CONFIG_M5282)
/* Initialize RAMBAR1: locate SRAM and validate it */
move.l #(CFG_INIT_RAM_ADDR + 0x21), %d0
movec %d0, %RAMBAR1
+#if defined(CONFIG_M5282)
#if (TEXT_BASE == CFG_INT_FLASH_BASE)
/* Setup code in SRAM to initialize FLASHBAR, if start from internal Flash */
diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c
index 6b6f828..813aa79 100644
--- a/cpu/mpc5xxx/cpu.c
+++ b/cpu/mpc5xxx/cpu.c
@@ -31,6 +31,10 @@
#include <mpc5xxx.h>
#include <asm/processor.h>
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+
DECLARE_GLOBAL_DATA_PTR;
int checkcpu (void)
@@ -102,3 +106,26 @@
}
/* ------------------------------------------------------------------------- */
+
+#ifdef CONFIG_OF_FLAT_TREE
+void
+ft_cpu_setup(void *blob, bd_t *bd)
+{
+ u32 *p;
+ int len;
+
+ /* Core XLB bus frequency */
+ p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len);
+ if (p != NULL)
+ *p = cpu_to_be32(bd->bi_busfreq);
+
+ /* SOC peripherals use the IPB bus frequency */
+ p = ft_get_prop(blob, "/" OF_SOC "/bus-frequency", &len);
+ if (p != NULL)
+ *p = cpu_to_be32(bd->bi_ipbfreq);
+
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@3000/mac-address", &len);
+ if (p != NULL)
+ memcpy(p, bd->bi_enetaddr, 6);
+}
+#endif
diff --git a/cpu/mpc83xx/Makefile b/cpu/mpc83xx/Makefile
index b2a6b3e..4b9dcc8 100644
--- a/cpu/mpc83xx/Makefile
+++ b/cpu/mpc83xx/Makefile
@@ -27,9 +27,9 @@
LIB = $(obj)lib$(CPU).a
-START = start.o resetvec.o
+START = start.o
COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \
- i2c.o spd_sdram.o
+ spd_sdram.o qe_io.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index 20bba6c..1b51078 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2004 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,11 +18,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
- *
- * Change log:
- *
- * 20050101: Eran Liberty (liberty@freescale.com)
- * Initial file creating (porting from 85XX & 8260)
*/
/*
@@ -43,35 +38,140 @@
int checkcpu(void)
{
+ volatile immap_t *immr;
ulong clock = gd->cpu_clk;
u32 pvr = get_pvr();
+ u32 spridr;
char buf[32];
+ immr = (immap_t *)CFG_IMMR;
+
if ((pvr & 0xFFFF0000) != PVR_83xx) {
puts("Not MPC83xx Family!!!\n");
return -1;
}
- puts("CPU: MPC83xx, ");
- switch(pvr) {
- case PVR_8349_REV10:
+ spridr = immr->sysconf.spridr;
+ puts("CPU: ");
+ switch(spridr) {
+ case SPR_8349E_REV10:
+ case SPR_8349E_REV11:
+ puts("MPC8349E, ");
+ break;
+ case SPR_8349_REV10:
+ case SPR_8349_REV11:
+ puts("MPC8349, ");
break;
- case PVR_8349_REV11:
+ case SPR_8347E_REV10_TBGA:
+ case SPR_8347E_REV11_TBGA:
+ case SPR_8347E_REV10_PBGA:
+ case SPR_8347E_REV11_PBGA:
+ puts("MPC8347E, ");
+ break;
+ case SPR_8347_REV10_TBGA:
+ case SPR_8347_REV11_TBGA:
+ case SPR_8347_REV10_PBGA:
+ case SPR_8347_REV11_PBGA:
+ puts("MPC8347, ");
+ break;
+ case SPR_8343E_REV10:
+ case SPR_8343E_REV11:
+ puts("MPC8343E, ");
+ break;
+ case SPR_8343_REV10:
+ case SPR_8343_REV11:
+ puts("MPC8343, ");
+ break;
+ case SPR_8360E_REV10:
+ case SPR_8360E_REV11:
+ case SPR_8360E_REV12:
+ puts("MPC8360E, ");
+ break;
+ case SPR_8360_REV10:
+ case SPR_8360_REV11:
+ case SPR_8360_REV12:
+ puts("MPC8360, ");
break;
default:
puts("Rev: Unknown\n");
return -1; /* Not sure what this is */
}
- printf("Rev: %d.%d at %s MHz\n", (pvr & 0xf0) >> 4,
- (pvr & 0x0f), strmhz(buf, clock));
+#if defined(CONFIG_MPC8349)
+ printf("Rev: %02x at %s MHz\n", (spridr & 0x0000FFFF)>>4 |(spridr & 0x0000000F), strmhz(buf, clock));
+#else
+ printf("Rev: %02x at %s MHz\n", spridr & 0x0000FFFF, strmhz(buf, clock));
+#endif
return 0;
}
+/*
+ * Program a UPM with the code supplied in the table.
+ *
+ * The 'dummy' variable is used to increment the MAD. 'dummy' is
+ * supposed to be a pointer to the memory of the device being
+ * programmed by the UPM. The data in the MDR is written into
+ * memory and the MAD is incremented every time there's a read
+ * from 'dummy'. Unfortunately, the current prototype for this
+ * function doesn't allow for passing the address of this
+ * device, and changing the prototype will break a number lots
+ * of other code, so we need to use a round-about way of finding
+ * the value for 'dummy'.
+ *
+ * The value can be extracted from the base address bits of the
+ * Base Register (BR) associated with the specific UPM. To find
+ * that BR, we need to scan all 8 BRs until we find the one that
+ * has its MSEL bits matching the UPM we want. Once we know the
+ * right BR, we can extract the base address bits from it.
+ *
+ * The MxMR and the BR and OR of the chosen bank should all be
+ * configured before calling this function.
+ *
+ * Parameters:
+ * upm: 0=UPMA, 1=UPMB, 2=UPMC
+ * table: Pointer to an array of values to program
+ * size: Number of elements in the array. Must be 64 or less.
+ */
void upmconfig (uint upm, uint *table, uint size)
{
- hang(); /* FIXME: upconfig() needed? */
+#if defined(CONFIG_MPC834X)
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile lbus83xx_t *lbus = &immap->lbus;
+ volatile uchar *dummy = NULL;
+ const u32 msel = (upm + 4) << BR_MSEL_SHIFT; /* What the MSEL field in BRn should be */
+ volatile u32 *mxmr = &lbus->mamr + upm; /* Pointer to mamr, mbmr, or mcmr */
+ uint i;
+
+ /* Scan all the banks to determine the base address of the device */
+ for (i = 0; i < 8; i++) {
+ if ((lbus->bank[i].br & BR_MSEL) == msel) {
+ dummy = (uchar *) (lbus->bank[i].br & BR_BA);
+ break;
+ }
+ }
+
+ if (!dummy) {
+ printf("Error: %s() could not find matching BR\n", __FUNCTION__);
+ hang();
+ }
+
+ /* Set the OP field in the MxMR to "write" and the MAD field to 000000 */
+ *mxmr = (*mxmr & 0xCFFFFFC0) | 0x10000000;
+
+ for (i = 0; i < size; i++) {
+ lbus->mdr = table[i];
+ __asm__ __volatile__ ("sync");
+ *dummy; /* Write the value to memory and increment MAD */
+ __asm__ __volatile__ ("sync");
+ }
+
+ /* Set the OP field in the MxMR to "normal" and the MAD field to 000000 */
+ *mxmr &= 0xCFFFFFC0;
+#else
+ printf("Error: %s() not defined for this configuration.\n", __FUNCTION__);
+ hang();
+#endif
}
@@ -83,7 +183,7 @@
ulong addr;
#endif
- volatile immap_t *immap = (immap_t *) CFG_IMMRBAR;
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
#ifdef MPC83xx_RESET
/* Interrupts and MMU off */
@@ -150,9 +250,21 @@
#if defined(CONFIG_WATCHDOG)
void watchdog_reset (void)
{
- hang(); /* FIXME: implement watchdog_reset()? */
+#ifdef CONFIG_MPC834X
+ int re_enable = disable_interrupts();
+
+ /* Reset the 83xx watchdog */
+ volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ immr->wdt.swsrr = 0x556c;
+ immr->wdt.swsrr = 0xaa39;
+
+ if (re_enable)
+ enable_interrupts ();
+#else
+ hang();
+#endif
}
-#endif /* CONFIG_WATCHDOG */
+#endif
#if defined(CONFIG_OF_FLAT_TREE)
void
@@ -180,12 +292,12 @@
*p = cpu_to_be32(clock);
#ifdef CONFIG_MPC83XX_TSEC1
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/address", &len);
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/local-mac-address", &len);
memcpy(p, bd->bi_enetaddr, 6);
#endif
#ifdef CONFIG_MPC83XX_TSEC2
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/address", &len);
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/local-mac-address", &len);
memcpy(p, bd->bi_enet1addr, 6);
#endif
}
@@ -194,8 +306,8 @@
#if defined(CONFIG_DDR_ECC)
void dma_init(void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
- volatile dma8349_t *dma = &immap->dma;
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile dma83xx_t *dma = &immap->dma;
volatile u32 status = swab32(dma->dmasr0);
volatile u32 dmamr0 = swab32(dma->dmamr0);
@@ -225,8 +337,8 @@
uint dma_check(void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
- volatile dma8349_t *dma = &immap->dma;
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile dma83xx_t *dma = &immap->dma;
volatile u32 status = swab32(dma->dmasr0);
volatile u32 byte_count = swab32(dma->dmabcr0);
@@ -244,8 +356,8 @@
int dma_xfer(void *dest, u32 count, void *src)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
- volatile dma8349_t *dma = &immap->dma;
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile dma83xx_t *dma = &immap->dma;
volatile u32 dmamr0;
/* initialize DMASARn, DMADAR and DMAABCRn */
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index 6ed0992..e5725fb 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2004 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,11 +18,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
- *
- * Change log:
- *
- * 20050101: Eran Liberty (liberty@freescale.com)
- * Initial file creating (porting from 85XX & 8260)
*/
#include <common.h>
@@ -31,6 +26,30 @@
DECLARE_GLOBAL_DATA_PTR;
+#ifdef CONFIG_QE
+extern qe_iop_conf_t qe_iop_conf_tab[];
+extern void qe_config_iopin(u8 port, u8 pin, int dir,
+ int open_drain, int assign);
+extern void qe_init(uint qe_base);
+extern void qe_reset(void);
+
+static void config_qe_ioports(void)
+{
+ u8 port, pin;
+ int dir, open_drain, assign;
+ int i;
+
+ for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) {
+ port = qe_iop_conf_tab[i].port;
+ pin = qe_iop_conf_tab[i].pin;
+ dir = qe_iop_conf_tab[i].dir;
+ open_drain = qe_iop_conf_tab[i].open_drain;
+ assign = qe_iop_conf_tab[i].assign;
+ qe_config_iopin(port, pin, dir, open_drain, assign);
+ }
+}
+#endif
+
/*
* Breathe some life into the CPU...
*
@@ -46,6 +65,37 @@
/* Clear initial global data */
memset ((void *) gd, 0, sizeof (gd_t));
+ /* system performance tweaking */
+
+#ifdef CFG_ACR_PIPE_DEP
+ /* Arbiter pipeline depth */
+ im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) | (3 << ACR_PIPE_DEP_SHIFT);
+#endif
+
+#ifdef CFG_SPCR_TSEC1EP
+ /* TSEC1 Emergency priority */
+ im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC1EP) | (3 << SPCR_TSEC1EP_SHIFT);
+#endif
+
+#ifdef CFG_SPCR_TSEC2EP
+ /* TSEC2 Emergency priority */
+ im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC2EP) | (3 << SPCR_TSEC2EP_SHIFT);
+#endif
+
+#ifdef CFG_SCCR_TSEC1CM
+ /* TSEC1 clock mode */
+ im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1CM) | (1 << SCCR_TSEC1CM_SHIFT);
+#endif
+#ifdef CFG_SCCR_TSEC2CM
+ /* TSEC2 & I2C1 clock mode */
+ im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2CM) | (1 << SCCR_TSEC2CM_SHIFT);
+#endif
+
+#ifdef CFG_ACR_RPTCNT
+ /* Arbiter repeat count */
+ im->arbiter.acr = ((im->arbiter.acr & ~(ACR_RPTCNT)) | (3 << ACR_RPTCNT_SHIFT));
+#endif
+
/* RSR - Reset Status Register - clear all status (4.6.1.3) */
gd->reset_status = im->reset.rsr;
im->reset.rsr = ~(RSR_RES);
@@ -69,6 +119,10 @@
#ifdef CFG_SICRL
im->sysconf.sicrl = CFG_SICRL;
#endif
+#ifdef CONFIG_QE
+ /* Config QE ioports */
+ config_qe_ioports();
+#endif
/*
* Memory Controller:
@@ -157,12 +211,12 @@
#endif
}
-
-/*
- * Initialize higher level parts of CPU like time base and timers.
- */
-
int cpu_init_r (void)
{
+#ifdef CONFIG_QE
+ uint qe_base = CFG_IMMR + 0x00100000; /* QE immr base */
+ qe_init(qe_base);
+ qe_reset();
+#endif
return 0;
}
diff --git a/cpu/mpc83xx/i2c.c b/cpu/mpc83xx/i2c.c
deleted file mode 100644
index 70450f9..0000000
--- a/cpu/mpc83xx/i2c.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * (C) Copyright 2003,Motorola Inc.
- * Xianghua Xiao <x.xiao@motorola.com>
- * Adapted for Motorola 85xx chip.
- *
- * (C) Copyright 2003
- * Gleb Natapov <gnatapov@mrv.com>
- * Some bits are taken from linux driver writen by adrian@humboldt.co.uk
- *
- * Hardware I2C driver for MPC107 PCI bridge.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Change log:
- *
- * 20050101: Eran Liberty (liberty@freescale.com)
- * Initial file creating (porting from 85XX & 8260)
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/io.h>
-
-#ifdef CONFIG_HARD_I2C
-#include <i2c.h>
-#include <asm/i2c.h>
-
-#if defined(CONFIG_MPC8349EMDS) || defined(CONFIG_TQM834X)
-i2c_t * mpc8349_i2c = (i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET);
-#endif
-
-void
-i2c_init(int speed, int slaveadd)
-{
- /* stop I2C controller */
- writeb(0x00 , &I2C->cr);
-
- /* set clock */
- writeb(0x3f, &I2C->fdr);
-
- /* set default filter */
- writeb(0x10,&I2C->dfsrr);
-
- /* write slave address */
- writeb(slaveadd, &I2C->adr);
-
- /* clear status register */
- writeb(0x00, &I2C->sr);
-
- /* start I2C controller */
- writeb(I2C_CR_MEN, &I2C->cr);
-}
-
-static __inline__ int
-i2c_wait4bus (void)
-{
- ulong timeval = get_timer (0);
- while (readb(&I2C->sr) & I2C_SR_MBB) {
- if (get_timer (timeval) > I2C_TIMEOUT) {
- return -1;
- }
- }
- return 0;
-}
-
-static __inline__ int
-i2c_wait (int write)
-{
- u32 csr;
- ulong timeval = get_timer(0);
- do {
- csr = readb(&I2C->sr);
-
- if (!(csr & I2C_SR_MIF))
- continue;
-
- writeb(0x0, &I2C->sr);
-
- if (csr & I2C_SR_MAL) {
- debug("i2c_wait: MAL\n");
- return -1;
- }
-
- if (!(csr & I2C_SR_MCF)) {
- debug("i2c_wait: unfinished\n");
- return -1;
- }
-
- if (write == I2C_WRITE && (csr & I2C_SR_RXAK)) {
- debug("i2c_wait: No RXACK\n");
- return -1;
- }
-
- return 0;
- } while (get_timer (timeval) < I2C_TIMEOUT);
-
- debug("i2c_wait: timed out\n");
- return -1;
-}
-
-static __inline__ int
-i2c_write_addr (u8 dev, u8 dir, int rsta)
-{
- writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX |
- (rsta?I2C_CR_RSTA:0),
- &I2C->cr);
-
- writeb((dev << 1) | dir, &I2C->dr);
-
- if (i2c_wait (I2C_WRITE) < 0)
- return 0;
- return 1;
-}
-
-static __inline__ int
-__i2c_write (u8 *data, int length)
-{
- int i;
-
- writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX,
- &I2C->cr);
-
- for (i=0; i < length; i++) {
- writeb(data[i], &I2C->dr);
-
- if (i2c_wait (I2C_WRITE) < 0)
- break;
- }
- return i;
-}
-
-static __inline__ int
-__i2c_read (u8 *data, int length)
-{
- int i;
-
- writeb(I2C_CR_MEN | I2C_CR_MSTA |
- ((length == 1) ? I2C_CR_TXAK : 0),
- &I2C->cr);
-
- /* dummy read */
- readb(&I2C->dr);
-
- for (i=0; i < length; i++) {
- if (i2c_wait (I2C_READ) < 0)
- break;
-
- /* Generate ack on last next to last byte */
- if (i == length - 2)
- writeb(I2C_CR_MEN | I2C_CR_MSTA |
- I2C_CR_TXAK,
- &I2C->cr);
-
- /* Generate stop on last byte */
- if (i == length - 1)
- writeb(I2C_CR_MEN | I2C_CR_TXAK, &I2C->cr);
-
- data[i] = readb(&I2C->dr);
- }
- return i;
-}
-
-int
-i2c_read (u8 dev, uint addr, int alen, u8 *data, int length)
-{
- int i = 0;
- u8 *a = (u8*)&addr;
-
- if (i2c_wait4bus () < 0)
- goto exit;
-
- if (i2c_write_addr (dev, I2C_WRITE, 0) == 0)
- goto exit;
-
- if (__i2c_write (&a[4 - alen], alen) != alen)
- goto exit;
-
- if (i2c_write_addr (dev, I2C_READ, 1) == 0)
- goto exit;
-
- i = __i2c_read (data, length);
-
- exit:
- writeb(I2C_CR_MEN, &I2C->cr);
- return !(i == length);
-}
-
-int
-i2c_write (u8 dev, uint addr, int alen, u8 *data, int length)
-{
- int i = 0;
- u8 *a = (u8*)&addr;
-
- if (i2c_wait4bus () < 0)
- goto exit;
-
- if (i2c_write_addr (dev, I2C_WRITE, 0) == 0)
- goto exit;
-
- if (__i2c_write (&a[4 - alen], alen) != alen)
- goto exit;
-
- i = __i2c_write (data, length);
-
- exit:
- writeb(I2C_CR_MEN, &I2C->cr);
- return !(i == length);
-}
-
-int i2c_probe (uchar chip)
-{
- int tmp;
-
- /*
- * Try to read the first location of the chip. The underlying
- * driver doesn't appear to support sending just the chip address
- * and looking for an <ACK> back.
- */
- udelay(10000);
- return i2c_read (chip, 0, 1, (uchar *)&tmp, 1);
-}
-
-uchar i2c_reg_read (uchar i2c_addr, uchar reg)
-{
- uchar buf[1];
-
- i2c_read (i2c_addr, reg, 1, buf, 1);
-
- return (buf[0]);
-}
-
-void i2c_reg_write (uchar i2c_addr, uchar reg, uchar val)
-{
- i2c_write (i2c_addr, reg, 1, &val, 1);
-}
-
-#endif /* CONFIG_HARD_I2C */
diff --git a/cpu/mpc83xx/interrupts.c b/cpu/mpc83xx/interrupts.c
index 5a0babf..bb1fe1a 100644
--- a/cpu/mpc83xx/interrupts.c
+++ b/cpu/mpc83xx/interrupts.c
@@ -21,13 +21,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
- *
- * Change log:
- *
- * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 22-Oct-00
- *
- * 20050101: Eran Liberty (liberty@freescale.com)
- * Initial file creating (porting from 85XX & 8260)
*/
#include <common.h>
@@ -45,7 +38,7 @@
int interrupt_init_cpu (unsigned *decrementer_count)
{
- volatile immap_t *immr = (immap_t *) CFG_IMMRBAR;
+ volatile immap_t *immr = (immap_t *) CFG_IMMR;
*decrementer_count = (gd->bus_clk / 4) / CFG_HZ;
diff --git a/cpu/mpc83xx/qe_io.c b/cpu/mpc83xx/qe_io.c
new file mode 100644
index 0000000..ebe3487
--- /dev/null
+++ b/cpu/mpc83xx/qe_io.c
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ * based on source code of Shlomi Gridish
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "common.h"
+#include "asm/errno.h"
+#include "asm/io.h"
+#include "asm/immap_83xx.h"
+
+#if defined(CONFIG_QE)
+#define NUM_OF_PINS 32
+void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
+{
+ u32 pin_2bit_mask;
+ u32 pin_2bit_dir;
+ u32 pin_2bit_assign;
+ u32 pin_1bit_mask;
+ u32 tmp_val;
+ volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
+ volatile gpio83xx_t *par_io =(volatile gpio83xx_t *)&im->gpio;
+
+ /* Caculate pin location and 2bit mask and dir */
+ pin_2bit_mask = (u32)(0x3 << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
+ pin_2bit_dir = (u32)(dir << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
+
+ /* Setup the direction */
+ tmp_val = (pin > (NUM_OF_PINS/2) - 1) ? \
+ in_be32(&par_io->ioport[port].dir2) :
+ in_be32(&par_io->ioport[port].dir1);
+
+ if (pin > (NUM_OF_PINS/2) -1) {
+ out_be32(&par_io->ioport[port].dir2, ~pin_2bit_mask & tmp_val);
+ out_be32(&par_io->ioport[port].dir2, pin_2bit_dir | tmp_val);
+ } else {
+ out_be32(&par_io->ioport[port].dir1, ~pin_2bit_mask & tmp_val);
+ out_be32(&par_io->ioport[port].dir1, pin_2bit_dir | tmp_val);
+ }
+
+ /* Calculate pin location for 1bit mask */
+ pin_1bit_mask = (u32)(1 << (NUM_OF_PINS - (pin+1)));
+
+ /* Setup the open drain */
+ tmp_val = in_be32(&par_io->ioport[port].podr);
+ if (open_drain) {
+ out_be32(&par_io->ioport[port].podr, pin_1bit_mask | tmp_val);
+ } else {
+ out_be32(&par_io->ioport[port].podr, ~pin_1bit_mask & tmp_val);
+ }
+
+ /* Setup the assignment */
+ tmp_val = (pin > (NUM_OF_PINS/2) - 1) ?
+ in_be32(&par_io->ioport[port].ppar2):
+ in_be32(&par_io->ioport[port].ppar1);
+ pin_2bit_assign = (u32)(assign
+ << (NUM_OF_PINS - (pin%(NUM_OF_PINS/2)+1)*2));
+
+ /* Clear and set 2 bits mask */
+ if (pin > (NUM_OF_PINS/2) - 1) {
+ out_be32(&par_io->ioport[port].ppar2, ~pin_2bit_mask & tmp_val);
+ out_be32(&par_io->ioport[port].ppar2, pin_2bit_assign | tmp_val);
+ } else {
+ out_be32(&par_io->ioport[port].ppar1, ~pin_2bit_mask & tmp_val);
+ out_be32(&par_io->ioport[port].ppar1, pin_2bit_assign | tmp_val);
+ }
+}
+
+#endif /* CONFIG_QE */
diff --git a/cpu/mpc83xx/resetvec.S b/cpu/mpc83xx/resetvec.S
deleted file mode 100644
index 3dfcd0d..0000000
--- a/cpu/mpc83xx/resetvec.S
+++ /dev/null
@@ -1,6 +0,0 @@
- .section .resetvec,"ax"
-#ifndef FIXME
-#if 0
- b _start_e500
-#endif
-#endif
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index 48624fe..0d93f2e 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -1,8 +1,10 @@
/*
+ * (C) Copyright 2006 Freescale Semiconductor, Inc.
+ *
* (C) Copyright 2006
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
* (C) Copyright 2003 Motorola Inc.
* Xianghua Xiao (X.Xiao@motorola.com)
*
@@ -23,11 +25,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
- *
- * Change log:
- *
- * 20050101: Eran Liberty (liberty@freescale.com)
- * Initial file creating (porting from 85XX & 8260)
*/
#include <common.h>
@@ -39,7 +36,9 @@
#ifdef CONFIG_SPD_EEPROM
-#if defined(CONFIG_DDR_ECC)
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
extern void dma_init(void);
extern uint dma_check(void);
extern int dma_xfer(void *dest, uint count, void *src);
@@ -52,16 +51,16 @@
/*
* Convert picoseconds into clock cycles (rounding up if needed).
*/
-
int
picos_to_clk(int picos)
{
+ unsigned int ddr_bus_clk;
int clks;
- clks = picos / (2000000000 / (get_bus_freq(0) / 1000));
- if (picos % (2000000000 / (get_bus_freq(0) / 1000)) != 0) {
- clks++;
- }
+ ddr_bus_clk = gd->ddr_clk >> 1;
+ clks = picos / ((1000000000 / ddr_bus_clk) * 1000);
+ if (picos % ((1000000000 / ddr_bus_clk) * 1000) != 0)
+ clks++;
return clks;
}
@@ -103,33 +102,72 @@
long int spd_sdram()
{
- volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
- volatile ddr8349_t *ddr = &immap->ddr;
- volatile law8349_t *ecm = &immap->sysconf.ddrlaw[0];
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile ddr83xx_t *ddr = &immap->ddr;
+ volatile law83xx_t *ecm = &immap->sysconf.ddrlaw[0];
spd_eeprom_t spd;
- unsigned tmp, tmp1;
unsigned int memsize;
unsigned int law_size;
- unsigned char caslat;
- unsigned int trfc, trfc_clk, trfc_low;
+ unsigned char caslat, caslat_ctrl;
+ unsigned char burstlen;
+ unsigned int max_bus_clk;
+ unsigned int max_data_rate, effective_data_rate;
+ unsigned int ddrc_clk;
+ unsigned int refresh_clk;
+ unsigned sdram_cfg;
+ unsigned int ddrc_ecc_enable;
+ /* Read SPD parameters with I2C */
CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
#ifdef SPD_DEBUG
spd_debug(&spd);
#endif
+ /* Check the memory type */
+ if (spd.mem_type != SPD_MEMTYPE_DDR) {
+ printf("DDR: Module mem type is %02X\n", spd.mem_type);
+ return 0;
+ }
+
+ /* Check the number of physical bank */
if (spd.nrows > 2) {
- puts("DDR:Only two chip selects are supported on ADS.\n");
+ printf("DDR: The number of physical bank is %02X\n", spd.nrows);
return 0;
}
- if (spd.nrow_addr < 12
- || spd.nrow_addr > 14
- || spd.ncol_addr < 8
- || spd.ncol_addr > 11) {
- puts("DDR:Row or Col number unsupported.\n");
+ /* Check if the number of row of the module is in the range of DDRC */
+ if (spd.nrow_addr < 12 || spd.nrow_addr > 14) {
+ printf("DDR: Row number is out of range of DDRC, row=%02X\n",
+ spd.nrow_addr);
return 0;
}
+ /* Check if the number of col of the module is in the range of DDRC */
+ if (spd.ncol_addr < 8 || spd.ncol_addr > 11) {
+ printf("DDR: Col number is out of range of DDRC, col=%02X\n",
+ spd.ncol_addr);
+ return 0;
+ }
+ /* Setup DDR chip select register */
+#ifdef CFG_83XX_DDR_USES_CS0
+ ddr->csbnds[0].csbnds = (banksize(spd.row_dens) >> 24) - 1;
+ ddr->cs_config[0] = ( 1 << 31
+ | (spd.nrow_addr - 12) << 8
+ | (spd.ncol_addr - 8) );
+ debug("\n");
+ debug("cs0_bnds = 0x%08x\n",ddr->csbnds[0].csbnds);
+ debug("cs0_config = 0x%08x\n",ddr->cs_config[0]);
+
+ if (spd.nrows == 2) {
+ ddr->csbnds[1].csbnds = ( (banksize(spd.row_dens) >> 8)
+ | ((banksize(spd.row_dens) >> 23) - 1) );
+ ddr->cs_config[1] = ( 1<<31
+ | (spd.nrow_addr-12) << 8
+ | (spd.ncol_addr-8) );
+ debug("cs1_bnds = 0x%08x\n",ddr->csbnds[1].csbnds);
+ debug("cs1_config = 0x%08x\n",ddr->cs_config[1]);
+ }
+
+#else
ddr->csbnds[2].csbnds = (banksize(spd.row_dens) >> 24) - 1;
ddr->cs_config[2] = ( 1 << 31
| (spd.nrow_addr - 12) << 8
@@ -147,6 +185,7 @@
debug("cs3_bnds = 0x%08x\n",ddr->csbnds[3].csbnds);
debug("cs3_config = 0x%08x\n",ddr->cs_config[3]);
}
+#endif
if (spd.mem_type != 0x07) {
puts("No DDR module found!\n");
@@ -172,56 +211,136 @@
debug("DDR:ar=0x%08x\n", ecm->ar);
/*
- * find the largest CAS
+ * Find the largest CAS by locating the highest 1 bit
+ * in the spd.cas_lat field. Translate it to a DDR
+ * controller field value:
+ *
+ * CAS Lat DDR I Ctrl
+ * Clocks SPD Bit Value
+ * -------+--------+---------
+ * 1.0 0 001
+ * 1.5 1 010
+ * 2.0 2 011
+ * 2.5 3 100
+ * 3.0 4 101
+ * 3.5 5 110
+ * 4.0 6 111
*/
- if(spd.cas_lat & 0x40) {
- caslat = 7;
- } else if (spd.cas_lat & 0x20) {
- caslat = 6;
- } else if (spd.cas_lat & 0x10) {
- caslat = 5;
- } else if (spd.cas_lat & 0x08) {
- caslat = 4;
- } else if (spd.cas_lat & 0x04) {
- caslat = 3;
- } else if (spd.cas_lat & 0x02) {
- caslat = 2;
- } else if (spd.cas_lat & 0x01) {
- caslat = 1;
- } else {
- puts("DDR:no valid CAS Latency information.\n");
+ caslat = __ilog2(spd.cas_lat);
+
+ if (caslat > 6 ) {
+ printf("DDR: Invalid SPD CAS Latency, caslat=%02X\n",
+ spd.cas_lat);
return 0;
}
+ max_bus_clk = 1000 *10 / (((spd.clk_cycle & 0xF0) >> 4) * 10
+ + (spd.clk_cycle & 0x0f));
+ max_data_rate = max_bus_clk * 2;
- tmp = 20000 / (((spd.clk_cycle & 0xF0) >> 4) * 10
- + (spd.clk_cycle & 0x0f));
- debug("DDR:Module maximum data rate is: %dMhz\n", tmp);
+ debug("DDR:Module maximum data rate is: %dMhz\n", max_data_rate);
- tmp1 = get_bus_freq(0) / 1000000;
- if (tmp1 < 230 && tmp1 >= 90 && tmp >= 230) {
- /* 90~230 range, treated as DDR 200 */
- if (spd.clk_cycle3 == 0xa0)
- caslat -= 2;
- else if(spd.clk_cycle2 == 0xa0)
- caslat--;
- } else if (tmp1 < 280 && tmp1 >= 230 && tmp >= 280) {
- /* 230-280 range, treated as DDR 266 */
- if (spd.clk_cycle3 == 0x75)
- caslat -= 2;
- else if (spd.clk_cycle2 == 0x75)
- caslat--;
- } else if (tmp1 < 350 && tmp1 >= 280 && tmp >= 350) {
- /* 280~350 range, treated as DDR 333 */
- if (spd.clk_cycle3 == 0x60)
- caslat -= 2;
- else if (spd.clk_cycle2 == 0x60)
- caslat--;
- } else if (tmp1 < 90 || tmp1 >= 350) {
- /* DDR rate out-of-range */
- puts("DDR:platform frequency is not fit for DDR rate\n");
- return 0;
+ ddrc_clk = gd->ddr_clk / 1000000;
+
+ if (max_data_rate >= 390) { /* it is DDR 400 */
+ if (ddrc_clk <= 410 && ddrc_clk > 350) {
+ /* DDR controller clk at 350~410 */
+ effective_data_rate = 400; /* 5ns */
+ caslat = caslat;
+ } else if (ddrc_clk <= 350 && ddrc_clk > 280) {
+ /* DDR controller clk at 280~350 */
+ effective_data_rate = 333; /* 6ns */
+ if (spd.clk_cycle2 == 0x60)
+ caslat = caslat - 1;
+ else
+ caslat = caslat;
+ } else if (ddrc_clk <= 280 && ddrc_clk > 230) {
+ /* DDR controller clk at 230~280 */
+ effective_data_rate = 266; /* 7.5ns */
+ if (spd.clk_cycle3 == 0x75)
+ caslat = caslat - 2;
+ else if (spd.clk_cycle2 == 0x60)
+ caslat = caslat - 1;
+ else
+ caslat = caslat;
+ } else if (ddrc_clk <= 230 && ddrc_clk > 90) {
+ /* DDR controller clk at 90~230 */
+ effective_data_rate = 200; /* 10ns */
+ if (spd.clk_cycle3 == 0x75)
+ caslat = caslat - 2;
+ else if (spd.clk_cycle2 == 0x60)
+ caslat = caslat - 1;
+ else
+ caslat = caslat;
+ }
+ } else if (max_data_rate >= 323) { /* it is DDR 333 */
+ if (ddrc_clk <= 350 && ddrc_clk > 280) {
+ /* DDR controller clk at 280~350 */
+ effective_data_rate = 333; /* 6ns */
+ caslat = caslat;
+ } else if (ddrc_clk <= 280 && ddrc_clk > 230) {
+ /* DDR controller clk at 230~280 */
+ effective_data_rate = 266; /* 7.5ns */
+ if (spd.clk_cycle2 == 0x75)
+ caslat = caslat - 1;
+ else
+ caslat = caslat;
+ } else if (ddrc_clk <= 230 && ddrc_clk > 90) {
+ /* DDR controller clk at 90~230 */
+ effective_data_rate = 200; /* 10ns */
+ if (spd.clk_cycle3 == 0xa0)
+ caslat = caslat - 2;
+ else if (spd.clk_cycle2 == 0x75)
+ caslat = caslat - 1;
+ else
+ caslat = caslat;
+ }
+ } else if (max_data_rate >= 256) { /* it is DDR 266 */
+ if (ddrc_clk <= 350 && ddrc_clk > 280) {
+ /* DDR controller clk at 280~350 */
+ printf("DDR: DDR controller freq is more than "
+ "max data rate of the module\n");
+ return 0;
+ } else if (ddrc_clk <= 280 && ddrc_clk > 230) {
+ /* DDR controller clk at 230~280 */
+ effective_data_rate = 266; /* 7.5ns */
+ caslat = caslat;
+ } else if (ddrc_clk <= 230 && ddrc_clk > 90) {
+ /* DDR controller clk at 90~230 */
+ effective_data_rate = 200; /* 10ns */
+ if (spd.clk_cycle2 == 0xa0)
+ caslat = caslat - 1;
+ }
+ } else if (max_data_rate >= 190) { /* it is DDR 200 */
+ if (ddrc_clk <= 350 && ddrc_clk > 230) {
+ /* DDR controller clk at 230~350 */
+ printf("DDR: DDR controller freq is more than "
+ "max data rate of the module\n");
+ return 0;
+ } else if (ddrc_clk <= 230 && ddrc_clk > 90) {
+ /* DDR controller clk at 90~230 */
+ effective_data_rate = 200; /* 10ns */
+ caslat = caslat;
+ }
}
+ debug("DDR:Effective data rate is: %dMhz\n", effective_data_rate);
+ debug("DDR:The MSB 1 of CAS Latency is: %d\n", caslat);
+
+ /*
+ * Errata DDR6 work around: input enable 2 cycles earlier.
+ * including MPC834x Rev1.0/1.1 and MPC8360 Rev1.1/1.2.
+ */
+ if (caslat == 2)
+ ddr->debug_reg = 0x201c0000; /* CL=2 */
+ else if (caslat == 3)
+ ddr->debug_reg = 0x202c0000; /* CL=2.5 */
+ else if (caslat == 4)
+ ddr->debug_reg = 0x202c0000; /* CL=3.0 */
+
+ __asm__ __volatile__ ("sync");
+
+ debug("Errata DDR6 (debug_reg=0x%08x)\n", ddr->debug_reg);
+
/*
* note: caslat must also be programmed into ddr->sdram_mode
* register.
@@ -229,16 +348,14 @@
* note: WRREC(Twr) and WRTORD(Twtr) are not in SPD,
* use conservative value here.
*/
- trfc = spd.trfc * 1000; /* up to ps */
- trfc_clk = picos_to_clk(trfc);
- trfc_low = (trfc_clk - 8) & 0xf;
+ caslat_ctrl = (caslat + 1) & 0x07; /* see as above */
ddr->timing_cfg_1 =
(((picos_to_clk(spd.trp * 250) & 0x07) << 28 ) |
((picos_to_clk(spd.tras * 1000) & 0x0f ) << 24 ) |
((picos_to_clk(spd.trcd * 250) & 0x07) << 20 ) |
- ((caslat & 0x07) << 16 ) |
- (trfc_low << 12 ) |
+ ((caslat_ctrl & 0x07) << 16 ) |
+ (((picos_to_clk(spd.trfc * 1000) - 8) & 0x0f) << 12 ) |
( 0x300 ) |
((picos_to_clk(spd.trrd * 250) & 0x07) << 4) | 1);
@@ -246,144 +363,143 @@
debug("DDR:timing_cfg_1=0x%08x\n", ddr->timing_cfg_1);
debug("DDR:timing_cfg_2=0x%08x\n", ddr->timing_cfg_2);
+ /* Setup init value, but not enable */
+ ddr->sdram_cfg = 0x42000000;
- /*
- * Only DDR I is supported
- * DDR I and II have different mode-register-set definition
+ /* Check DIMM data bus width */
+ if (spd.dataw_lsb == 0x20) {
+ burstlen = 0x03; /* 32 bit data bus, burst len is 8 */
+ printf("\n DDR DIMM: data bus width is 32 bit");
+ } else {
+ burstlen = 0x02; /* Others act as 64 bit bus, burst len is 4 */
+ printf("\n DDR DIMM: data bus width is 64 bit");
+ }
+
+ /* Is this an ECC DDR chip? */
+ if (spd.config == 0x02)
+ printf(" with ECC\n");
+ else
+ printf(" without ECC\n");
+
+ /* Burst length is always 4 for 64 bit data bus, 8 for 32 bit data bus,
+ Burst type is sequential
*/
- switch(caslat) {
- case 2:
- tmp = 0x50; /* 1.5 */
- break;
- case 3:
- tmp = 0x20; /* 2.0 */
- break;
- case 4:
- tmp = 0x60; /* 2.5 */
- break;
- case 5:
- tmp = 0x30; /* 3.0 */
- break;
- default:
- puts("DDR:only CAS Latency 1.5, 2.0, 2.5, 3.0 is supported.\n");
- return 0;
+ switch (caslat) {
+ case 1:
+ ddr->sdram_mode = 0x50 | burstlen; /* CL=1.5 */
+ break;
+ case 2:
+ ddr->sdram_mode = 0x20 | burstlen; /* CL=2.0 */
+ break;
+ case 3:
+ ddr->sdram_mode = 0x60 | burstlen; /* CL=2.5 */
+ break;
+ case 4:
+ ddr->sdram_mode = 0x30 | burstlen; /* CL=3.0 */
+ break;
+ default:
+ printf("DDR:only CL 1.5, 2.0, 2.5, 3.0 is supported\n");
+ return 0;
}
-#if defined (CONFIG_DDR_32BIT)
- /* set burst length to 8 for 32-bit data path */
- tmp |= 0x03;
-#else
- /* set burst length to 4 - default for 64-bit data path */
- tmp |= 0x02;
-#endif
- ddr->sdram_mode = tmp;
debug("DDR:sdram_mode=0x%08x\n", ddr->sdram_mode);
- switch(spd.refresh) {
- case 0x00:
- case 0x80:
- tmp = picos_to_clk(15625000);
- break;
- case 0x01:
- case 0x81:
- tmp = picos_to_clk(3900000);
- break;
- case 0x02:
- case 0x82:
- tmp = picos_to_clk(7800000);
- break;
- case 0x03:
- case 0x83:
- tmp = picos_to_clk(31300000);
- break;
- case 0x04:
- case 0x84:
- tmp = picos_to_clk(62500000);
- break;
- case 0x05:
- case 0x85:
- tmp = picos_to_clk(125000000);
- break;
- default:
- tmp = 0x512;
- break;
+ switch (spd.refresh) {
+ case 0x00:
+ case 0x80:
+ refresh_clk = picos_to_clk(15625000);
+ break;
+ case 0x01:
+ case 0x81:
+ refresh_clk = picos_to_clk(3900000);
+ break;
+ case 0x02:
+ case 0x82:
+ refresh_clk = picos_to_clk(7800000);
+ break;
+ case 0x03:
+ case 0x83:
+ refresh_clk = picos_to_clk(31300000);
+ break;
+ case 0x04:
+ case 0x84:
+ refresh_clk = picos_to_clk(62500000);
+ break;
+ case 0x05:
+ case 0x85:
+ refresh_clk = picos_to_clk(125000000);
+ break;
+ default:
+ refresh_clk = 0x512;
+ break;
}
/*
* Set BSTOPRE to 0x100 for page mode
* If auto-charge is used, set BSTOPRE = 0
*/
- ddr->sdram_interval = ((tmp & 0x3fff) << 16) | 0x100;
+ ddr->sdram_interval = ((refresh_clk & 0x3fff) << 16) | 0x100;
debug("DDR:sdram_interval=0x%08x\n", ddr->sdram_interval);
- /*
- * Is this an ECC DDR chip?
+ /* SS_EN = 0, source synchronous disable
+ * CLK_ADJST = 0, MCK/MCK# is launched aligned with addr/cmd
*/
-#if defined(CONFIG_DDR_ECC)
- if (spd.config == 0x02) {
- /* disable error detection */
- ddr->err_disable = ~ECC_ERROR_ENABLE;
+ ddr->sdram_clk_cntl = 0x00000000;
+ debug("DDR:sdram_clk_cntl=0x%08x\n", ddr->sdram_clk_cntl);
- /* set single bit error threshold to maximum value,
- * reset counter to zero */
- ddr->err_sbe = (255 << ECC_ERROR_MAN_SBET_SHIFT) |
- (0 << ECC_ERROR_MAN_SBEC_SHIFT);
- }
- debug("DDR:err_disable=0x%08x\n", ddr->err_disable);
- debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe);
-#endif
asm("sync;isync");
- udelay(500);
-
- /*
- * SS_EN=1,
- * CLK_ADJST = 2-MCK/MCK_B, is lauched 1/2 of one SDRAM
- * clock cycle after address/command
- */
- /*ddr->sdram_clk_cntl = 0x82000000;*/
- ddr->sdram_clk_cntl = (DDR_SDRAM_CLK_CNTL_SS_EN|DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05);
+ udelay(600);
/*
- * Figure out the settings for the sdram_cfg register. Build up
- * the entire register in 'tmp' before writing since the write into
+ * Figure out the settings for the sdram_cfg register. Build up
+ * the value in 'sdram_cfg' before writing since the write into
* the register will actually enable the memory controller, and all
* settings must be done before enabling.
*
* sdram_cfg[0] = 1 (ddr sdram logic enable)
* sdram_cfg[1] = 1 (self-refresh-enable)
* sdram_cfg[6:7] = 2 (SDRAM type = DDR SDRAM)
+ * sdram_cfg[12] = 0 (32_BE =0 , 64 bit bus mode)
+ * sdram_cfg[13] = 0 (8_BE =0, 4-beat bursts)
*/
- tmp = 0xc2000000;
+ sdram_cfg = 0xC2000000;
-#if defined (CONFIG_DDR_32BIT)
- /* in 32-Bit mode burst len is 8 beats */
- tmp |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE);
-#endif
- /*
- * sdram_cfg[3] = RD_EN - registered DIMM enable
- * A value of 0x26 indicates micron registered DIMMS (micron.com)
- */
- if (spd.mod_attr == 0x26) {
- tmp |= 0x10000000;
- }
+ /* sdram_cfg[3] = RD_EN - registered DIMM enable */
+ if (spd.mod_attr & 0x02)
+ sdram_cfg |= 0x10000000;
+
+ /* The DIMM is 32bit width */
+ if (spd.dataw_lsb == 0x20)
+ sdram_cfg |= 0x000C0000;
+
+ ddrc_ecc_enable = 0;
#if defined(CONFIG_DDR_ECC)
- /*
- * If the user wanted ECC (enabled via sdram_cfg[2])
- */
+ /* Enable ECC with sdram_cfg[2] */
if (spd.config == 0x02) {
- tmp |= SDRAM_CFG_ECC_EN;
+ sdram_cfg |= 0x20000000;
+ ddrc_ecc_enable = 1;
+ /* disable error detection */
+ ddr->err_disable = ~ECC_ERROR_ENABLE;
+ /* set single bit error threshold to maximum value,
+ * reset counter to zero */
+ ddr->err_sbe = (255 << ECC_ERROR_MAN_SBET_SHIFT) |
+ (0 << ECC_ERROR_MAN_SBEC_SHIFT);
}
+
+ debug("DDR:err_disable=0x%08x\n", ddr->err_disable);
+ debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe);
#endif
+ printf(" DDRC ECC mode: %s\n", ddrc_ecc_enable ? "ON":"OFF");
#if defined(CONFIG_DDR_2T_TIMING)
/*
* Enable 2T timing by setting sdram_cfg[16].
*/
- tmp |= SDRAM_CFG_2T_EN;
+ sdram_cfg |= SDRAM_CFG_2T_EN;
#endif
-
- ddr->sdram_cfg = tmp;
+ /* Enable controller, and GO! */
+ ddr->sdram_cfg = sdram_cfg;
asm("sync;isync");
udelay(500);
@@ -392,8 +508,7 @@
}
#endif /* CONFIG_SPD_EEPROM */
-
-#if defined(CONFIG_DDR_ECC)
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
/*
* Use timebase counter, get_timer() is not availabe
* at this point of initialization yet.
@@ -429,74 +544,48 @@
/* #define CONFIG_DDR_ECC_INIT_VIA_DMA */
void ddr_enable_ecc(unsigned int dram_size)
{
- uint *p;
- volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
- volatile ddr8349_t *ddr = &immap->ddr;
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile ddr83xx_t *ddr= &immap->ddr;
unsigned long t_start, t_end;
+ register u64 *p;
+ register uint size;
+ unsigned int pattern[2];
#if defined(CONFIG_DDR_ECC_INIT_VIA_DMA)
uint i;
#endif
-
- debug("Initialize a Cachline in DRAM\n");
icache_enable();
-
-#if defined(CONFIG_DDR_ECC_INIT_VIA_DMA)
- /* Initialise DMA for direct Transfers */
- dma_init();
-#endif
-
t_start = get_tbms();
+ pattern[0] = 0xdeadbeef;
+ pattern[1] = 0xdeadbeef;
#if !defined(CONFIG_DDR_ECC_INIT_VIA_DMA)
- debug("DDR init: Cache flush method\n");
- for (p = 0; p < (uint *)(dram_size); p++) {
- if (((unsigned int)p & 0x1f) == 0) {
- ppcDcbz((unsigned long) p);
- }
-
- /* write pattern to cache and flush */
- *p = (unsigned int)0xdeadbeef;
-
- if (((unsigned int)p & 0x1c) == 0x1c) {
- ppcDcbf((unsigned long) p);
- }
+ debug("ddr init: CPU FP write method\n");
+ size = dram_size;
+ for (p = 0; p < (u64*)(size); p++) {
+ ppcDWstore((u32*)p, pattern);
}
+ __asm__ __volatile__ ("sync");
#else
- printf("DDR init: DMA method\n");
- for (p = 0; p < (uint *)(8 * 1024); p++) {
- /* zero one data cache line */
- if (((unsigned int)p & 0x1f) == 0) {
- ppcDcbz((unsigned long)p);
- }
-
- /* write pattern to it and flush */
- *p = (unsigned int)0xdeadbeef;
-
- if (((unsigned int)p & 0x1c) == 0x1c) {
- ppcDcbf((unsigned long)p);
- }
+ debug("ddr init: DMA method\n");
+ size = 0x2000;
+ for (p = 0; p < (u64*)(size); p++) {
+ ppcDWstore((u32*)p, pattern);
}
+ __asm__ __volatile__ ("sync");
- /* 8K */
- dma_xfer((uint *)0x2000, 0x2000, (uint *)0);
- /* 16K */
- dma_xfer((uint *)0x4000, 0x4000, (uint *)0);
- /* 32K */
- dma_xfer((uint *)0x8000, 0x8000, (uint *)0);
- /* 64K */
- dma_xfer((uint *)0x10000, 0x10000, (uint *)0);
- /* 128k */
- dma_xfer((uint *)0x20000, 0x20000, (uint *)0);
- /* 256k */
- dma_xfer((uint *)0x40000, 0x40000, (uint *)0);
- /* 512k */
- dma_xfer((uint *)0x80000, 0x80000, (uint *)0);
- /* 1M */
- dma_xfer((uint *)0x100000, 0x100000, (uint *)0);
- /* 2M */
- dma_xfer((uint *)0x200000, 0x200000, (uint *)0);
- /* 4M */
- dma_xfer((uint *)0x400000, 0x400000, (uint *)0);
+ /* Initialise DMA for direct transfer */
+ dma_init();
+ /* Start DMA to transfer */
+ dma_xfer((uint *)0x2000, 0x2000, (uint *)0); /* 8K */
+ dma_xfer((uint *)0x4000, 0x4000, (uint *)0); /* 16K */
+ dma_xfer((uint *)0x8000, 0x8000, (uint *)0); /* 32K */
+ dma_xfer((uint *)0x10000, 0x10000, (uint *)0); /* 64K */
+ dma_xfer((uint *)0x20000, 0x20000, (uint *)0); /* 128K */
+ dma_xfer((uint *)0x40000, 0x40000, (uint *)0); /* 256K */
+ dma_xfer((uint *)0x80000, 0x80000, (uint *)0); /* 512K */
+ dma_xfer((uint *)0x100000, 0x100000, (uint *)0); /* 1M */
+ dma_xfer((uint *)0x200000, 0x200000, (uint *)0); /* 2M */
+ dma_xfer((uint *)0x400000, 0x400000, (uint *)0); /* 4M */
for (i = 1; i < dram_size / 0x800000; i++) {
dma_xfer((uint *)(0x800000*i), 0x800000, (uint *)0);
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
index ad6b3f6..7e53b1e 100644
--- a/cpu/mpc83xx/speed.c
+++ b/cpu/mpc83xx/speed.c
@@ -2,7 +2,7 @@
* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Copyright 2004 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -21,11 +21,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
- *
- * Change log:
- *
- * 20050101: Eran Liberty (liberty@freescale.com)
- * Initial file creating (porting from 85XX & 8260)
*/
#include <common.h>
@@ -53,38 +48,38 @@
typedef struct {
mult_t core_csb_ratio;
- mult_t vco_divider;
+ mult_t vco_divider;
} corecnf_t;
corecnf_t corecnf_tab[] = {
- { _byp, _byp}, /* 0x00 */
- { _byp, _byp}, /* 0x01 */
- { _byp, _byp}, /* 0x02 */
- { _byp, _byp}, /* 0x03 */
- { _byp, _byp}, /* 0x04 */
- { _byp, _byp}, /* 0x05 */
- { _byp, _byp}, /* 0x06 */
- { _byp, _byp}, /* 0x07 */
- { _1x, _x2}, /* 0x08 */
- { _1x, _x4}, /* 0x09 */
- { _1x, _x8}, /* 0x0A */
- { _1x, _x8}, /* 0x0B */
- {_1_5x, _x2}, /* 0x0C */
- {_1_5x, _x4}, /* 0x0D */
- {_1_5x, _x8}, /* 0x0E */
- {_1_5x, _x8}, /* 0x0F */
- { _2x, _x2}, /* 0x10 */
- { _2x, _x4}, /* 0x11 */
- { _2x, _x8}, /* 0x12 */
- { _2x, _x8}, /* 0x13 */
- {_2_5x, _x2}, /* 0x14 */
- {_2_5x, _x4}, /* 0x15 */
- {_2_5x, _x8}, /* 0x16 */
- {_2_5x, _x8}, /* 0x17 */
- { _3x, _x2}, /* 0x18 */
- { _3x, _x4}, /* 0x19 */
- { _3x, _x8}, /* 0x1A */
- { _3x, _x8}, /* 0x1B */
+ {_byp, _byp}, /* 0x00 */
+ {_byp, _byp}, /* 0x01 */
+ {_byp, _byp}, /* 0x02 */
+ {_byp, _byp}, /* 0x03 */
+ {_byp, _byp}, /* 0x04 */
+ {_byp, _byp}, /* 0x05 */
+ {_byp, _byp}, /* 0x06 */
+ {_byp, _byp}, /* 0x07 */
+ {_1x, _x2}, /* 0x08 */
+ {_1x, _x4}, /* 0x09 */
+ {_1x, _x8}, /* 0x0A */
+ {_1x, _x8}, /* 0x0B */
+ {_1_5x, _x2}, /* 0x0C */
+ {_1_5x, _x4}, /* 0x0D */
+ {_1_5x, _x8}, /* 0x0E */
+ {_1_5x, _x8}, /* 0x0F */
+ {_2x, _x2}, /* 0x10 */
+ {_2x, _x4}, /* 0x11 */
+ {_2x, _x8}, /* 0x12 */
+ {_2x, _x8}, /* 0x13 */
+ {_2_5x, _x2}, /* 0x14 */
+ {_2_5x, _x4}, /* 0x15 */
+ {_2_5x, _x8}, /* 0x16 */
+ {_2_5x, _x8}, /* 0x17 */
+ {_3x, _x2}, /* 0x18 */
+ {_3x, _x4}, /* 0x19 */
+ {_3x, _x8}, /* 0x1A */
+ {_3x, _x8}, /* 0x1B */
};
/* ----------------------------------------------------------------- */
@@ -92,91 +87,64 @@
/*
*
*/
-int get_clocks (void)
+int get_clocks(void)
{
- volatile immap_t *im = (immap_t *)CFG_IMMRBAR;
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
u32 pci_sync_in;
- u8 spmf;
- u8 clkin_div;
+ u8 spmf;
+ u8 clkin_div;
u32 sccr;
u32 corecnf_tab_index;
- u8 corepll;
+ u8 corepll;
u32 lcrr;
u32 csb_clk;
+#if defined(CONFIG_MPC8349)
u32 tsec1_clk;
u32 tsec2_clk;
- u32 core_clk;
u32 usbmph_clk;
u32 usbdr_clk;
- u32 i2c_clk;
+#endif
+ u32 core_clk;
+ u32 i2c1_clk;
+ u32 i2c2_clk;
u32 enc_clk;
u32 lbiu_clk;
u32 lclk_clk;
u32 ddr_clk;
+#if defined (CONFIG_MPC8360)
+ u32 qepmf;
+ u32 qepdf;
+ u32 ddr_sec_clk;
+ u32 qe_clk;
+ u32 brg_clk;
+#endif
- if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
+ if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
return -1;
-#ifndef CFG_HRCW_HIGH
-# error "CFG_HRCW_HIGH must be defined in board config file"
-#endif /* CFG_HCWD_HIGH */
-
-#if (CFG_HRCW_HIGH & HRCWH_PCI_HOST)
-
-# ifndef CONFIG_83XX_CLKIN
-# error "In PCI Host Mode, CONFIG_83XX_CLKIN must be defined in board config file"
-# endif /* CONFIG_83XX_CLKIN */
-# ifdef CONFIG_83XX_PCICLK
-# warning "In PCI Host Mode, CONFIG_83XX_PCICLK in board config file is igonred"
-# endif /* CONFIG_83XX_PCICLK */
-
- /* PCI Host Mode */
- if (!(im->reset.rcwh & RCWH_PCIHOST)) {
- /* though RCWH_PCIHOST is defined in CFG_HRCW_HIGH
- * the im->reset.rcwhr PCI Host Mode is disabled
- * FIXME: findout if there is a way to issue some warning */
- return -2;
- }
- if (im->clk.spmr & SPMR_CKID) {
- /* PCI Clock is half CONFIG_83XX_CLKIN */
- pci_sync_in = CONFIG_83XX_CLKIN / 2;
- }
- else {
- pci_sync_in = CONFIG_83XX_CLKIN;
- }
-
-#else /* (CFG_HRCW_HIGH & HRCWH_PCI_HOST) */
-
-# ifdef CONFIG_83XX_CLKIN
-# warning "In PCI Agent Mode, CONFIG_83XX_CLKIN in board config file is igonred"
-# endif /* CONFIG_83XX_CLKIN */
-# ifndef CONFIG_83XX_PCICLK
-# error "In PCI Agent Mode, CONFIG_83XX_PCICLK must be defined in board config file"
-# endif /* CONFIG_83XX_PCICLK */
+ clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT);
- /* PCI Agent Mode */
- if (im->reset.rcwh & RCWH_PCIHOST) {
- /* though RCWH_PCIHOST is not defined in CFG_HRCW_HIGH
- * the im->reset.rcwhr PCI Host Mode is enabled */
- return -3;
+ if (im->reset.rcwh & HRCWH_PCI_HOST) {
+#if defined(CONFIG_83XX_CLKIN)
+ pci_sync_in = CONFIG_83XX_CLKIN / (1 + clkin_div);
+#else
+ pci_sync_in = 0xDEADBEEF;
+#endif
+ } else {
+#if defined(CONFIG_83XX_PCICLK)
+ pci_sync_in = CONFIG_83XX_PCICLK;
+#else
+ pci_sync_in = 0xDEADBEEF;
+#endif
}
- pci_sync_in = CONFIG_83XX_PCICLK;
-#endif /* (CFG_HRCW_HIGH | RCWH_PCIHOST) */
-
- /* we have up to date pci_sync_in */
spmf = ((im->reset.rcwl & RCWL_SPMF) >> RCWL_SPMF_SHIFT);
- clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT);
-
- if ((im->reset.rcwl & RCWL_LBIUCM) || (im->reset.rcwl & RCWL_DDRCM)) {
- csb_clk = (pci_sync_in * spmf * (1 + clkin_div)) / 2;
- }
- else {
- csb_clk = pci_sync_in * spmf * (1 + clkin_div);
- }
+ csb_clk = pci_sync_in * (1 + clkin_div) * spmf;
sccr = im->clk.sccr;
+
+#if defined(CONFIG_MPC8349)
switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) {
case 0:
tsec1_clk = 0;
@@ -212,25 +180,8 @@
/* unkown SCCR_TSEC2CM value */
return -5;
}
- i2c_clk = tsec2_clk;
- switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
- case 0:
- enc_clk = 0;
- break;
- case 1:
- enc_clk = csb_clk;
- break;
- case 2:
- enc_clk = csb_clk / 2;
- break;
- case 3:
- enc_clk = csb_clk / 3;
- break;
- default:
- /* unkown SCCR_ENCCM value */
- return -6;
- }
+ i2c1_clk = tsec2_clk;
switch ((sccr & SCCR_USBMPHCM) >> SCCR_USBMPHCM_SHIFT) {
case 0:
@@ -268,14 +219,42 @@
return -8;
}
- if (usbmph_clk != 0
- && usbdr_clk != 0
- && usbmph_clk != usbdr_clk ) {
- /* if USB MPH clock is not disabled and USB DR clock is not disabled than USB MPH & USB DR must have the same rate */
+ if (usbmph_clk != 0 && usbdr_clk != 0 && usbmph_clk != usbdr_clk) {
+ /* if USB MPH clock is not disabled and
+ * USB DR clock is not disabled then
+ * USB MPH & USB DR must have the same rate
+ */
return -9;
}
+#endif
+#if defined (CONFIG_MPC8360)
+ i2c1_clk = csb_clk;
+#endif
+ i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
- lbiu_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT));
+ switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
+ case 0:
+ enc_clk = 0;
+ break;
+ case 1:
+ enc_clk = csb_clk;
+ break;
+ case 2:
+ enc_clk = csb_clk / 2;
+ break;
+ case 3:
+ enc_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_ENCCM value */
+ return -6;
+ }
+#if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360)
+ lbiu_clk = csb_clk *
+ (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT));
+#else
+#error Unknown MPC83xx chip
+#endif
lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT;
switch (lcrr) {
case 2:
@@ -287,12 +266,20 @@
/* unknown lcrr */
return -10;
}
-
- ddr_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_DDRCM) >> RCWL_DDRCM_SHIFT));
-
+#if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360)
+ ddr_clk = csb_clk *
+ (1 + ((im->reset.rcwl & RCWL_DDRCM) >> RCWL_DDRCM_SHIFT));
corepll = (im->reset.rcwl & RCWL_COREPLL) >> RCWL_COREPLL_SHIFT;
+#if defined (CONFIG_MPC8360)
+ ddr_sec_clk = csb_clk * (1 +
+ ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT));
+#endif
+#else
+#error Unknown MPC83xx chip
+#endif
+
corecnf_tab_index = ((corepll & 0x1F) << 2) | ((corepll & 0x60) >> 5);
- if (corecnf_tab_index > (sizeof(corecnf_tab)/sizeof(corecnf_t)) ) {
+ if (corecnf_tab_index > (sizeof(corecnf_tab) / sizeof(corecnf_t))) {
/* corecnf_tab_index is too high, possibly worng value */
return -11;
}
@@ -309,7 +296,7 @@
core_clk = 2 * csb_clk;
break;
case _2_5x:
- core_clk = ( 5 * csb_clk) / 2;
+ core_clk = (5 * csb_clk) / 2;
break;
case _3x:
core_clk = 3 * csb_clk;
@@ -319,46 +306,69 @@
return -12;
}
- gd->csb_clk = csb_clk ;
- gd->tsec1_clk = tsec1_clk ;
- gd->tsec2_clk = tsec2_clk ;
- gd->core_clk = core_clk ;
- gd->usbmph_clk = usbmph_clk;
- gd->usbdr_clk = usbdr_clk ;
- gd->i2c_clk = i2c_clk ;
- gd->enc_clk = enc_clk ;
- gd->lbiu_clk = lbiu_clk ;
- gd->lclk_clk = lclk_clk ;
- gd->ddr_clk = ddr_clk ;
- gd->pci_clk = pci_sync_in;
+#if defined (CONFIG_MPC8360)
+ qepmf = (im->reset.rcwl & RCWL_CEPMF) >> RCWL_CEPMF_SHIFT;
+ qepdf = (im->reset.rcwl & RCWL_CEPDF) >> RCWL_CEPDF_SHIFT;
+ qe_clk = (pci_sync_in * qepmf) / (1 + qepdf);
+ brg_clk = qe_clk / 2;
+#endif
+ gd->csb_clk = csb_clk;
+#if defined(CONFIG_MPC8349)
+ gd->tsec1_clk = tsec1_clk;
+ gd->tsec2_clk = tsec2_clk;
+ gd->usbmph_clk = usbmph_clk;
+ gd->usbdr_clk = usbdr_clk;
+#endif
+ gd->core_clk = core_clk;
+ gd->i2c1_clk = i2c1_clk;
+ gd->i2c2_clk = i2c2_clk;
+ gd->enc_clk = enc_clk;
+ gd->lbiu_clk = lbiu_clk;
+ gd->lclk_clk = lclk_clk;
+ gd->ddr_clk = ddr_clk;
+#if defined (CONFIG_MPC8360)
+ gd->ddr_sec_clk = ddr_sec_clk;
+ gd->qe_clk = qe_clk;
+ gd->brg_clk = brg_clk;
+#endif
gd->cpu_clk = gd->core_clk;
- gd->bus_clk = gd->lbiu_clk;
+ gd->bus_clk = gd->csb_clk;
return 0;
+
}
/********************************************
* get_bus_freq
* return system bus freq in Hz
*********************************************/
-ulong get_bus_freq (ulong dummy)
+ulong get_bus_freq(ulong dummy)
{
return gd->csb_clk;
}
-int print_clock_conf (void)
+int print_clock_conf(void)
{
printf("Clock configuration:\n");
- printf(" Coherent System Bus: %4d MHz\n",gd->csb_clk/1000000);
- printf(" Core: %4d MHz\n",gd->core_clk/1000000);
- debug(" Local Bus Controller:%4d MHz\n",gd->lbiu_clk/1000000);
- printf(" Local Bus: %4d MHz\n",gd->lclk_clk/1000000);
- debug(" DDR: %4d MHz\n",gd->ddr_clk/1000000);
- debug(" I2C: %4d MHz\n",gd->i2c_clk/1000000);
- debug(" TSEC1: %4d MHz\n",gd->tsec1_clk/1000000);
- debug(" TSEC2: %4d MHz\n",gd->tsec2_clk/1000000);
- debug(" USB MPH: %4d MHz\n",gd->usbmph_clk/1000000);
- debug(" USB DR: %4d MHz\n",gd->usbdr_clk/1000000);
-
+ printf(" Coherent System Bus: %4d MHz\n", gd->csb_clk / 1000000);
+ printf(" Core: %4d MHz\n", gd->core_clk / 1000000);
+#if defined (CONFIG_MPC8360)
+ printf(" QE: %4d MHz\n", gd->qe_clk / 1000000);
+#endif
+ printf(" Local Bus Controller:%4d MHz\n", gd->lbiu_clk / 1000000);
+ printf(" Local Bus: %4d MHz\n", gd->lclk_clk / 1000000);
+ printf(" DDR: %4d MHz\n", gd->ddr_clk / 1000000);
+#if defined (CONFIG_MPC8360)
+ printf(" DDR Secondary: %4d MHz\n", gd->ddr_sec_clk / 1000000);
+#endif
+ printf(" SEC: %4d MHz\n", gd->enc_clk / 1000000);
+ printf(" I2C1: %4d MHz\n", gd->i2c1_clk / 1000000);
+ printf(" I2C2: %4d MHz\n", gd->i2c2_clk / 1000000);
+#if defined(CONFIG_MPC8349)
+ printf(" TSEC1: %4d MHz\n", gd->tsec1_clk / 1000000);
+ printf(" TSEC2: %4d MHz\n", gd->tsec2_clk / 1000000);
+ printf(" USB MPH: %4d MHz\n", gd->usbmph_clk / 1000000);
+ printf(" USB DR: %4d MHz\n", gd->usbdr_clk / 1000000);
+#endif
return 0;
}
diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S
index 6e02cce..0f27bb6 100644
--- a/cpu/mpc83xx/start.S
+++ b/cpu/mpc83xx/start.S
@@ -2,7 +2,7 @@
* Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
* Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
* Copyright (C) 2000, 2001,2002 Wolfgang Denk <wd@denx.de>
- * Copyright 2004 Freescale Semiconductor, Inc.
+ * Copyright Freescale Semiconductor, Inc. 2004, 2006. All rights reserved.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -104,9 +104,9 @@
#ifndef CONFIG_DEFAULT_IMMR
#error CONFIG_DEFAULT_IMMR must be defined
#endif /* CFG_DEFAULT_IMMR */
-#ifndef CFG_IMMRBAR
-#define CFG_IMMRBAR CONFIG_DEFAULT_IMMR
-#endif /* CFG_IMMRBAR */
+#ifndef CFG_IMMR
+#define CFG_IMMR CONFIG_DEFAULT_IMMR
+#endif /* CFG_IMMR */
/*
* After configuration, a system reset exception is executed using the
@@ -152,8 +152,8 @@
nop
boot_warm: /* time t 5 */
mfmsr r5 /* save msr contents */
- lis r3, CFG_IMMRBAR@h
- ori r3, r3, CFG_IMMRBAR@l
+ lis r3, CFG_IMMR@h
+ ori r3, r3, CFG_IMMR@l
stw r3, IMMRBAR(r4)
/* Initialise the E300 processor core */
@@ -226,7 +226,7 @@
GET_GOT /* initialize GOT access */
/* r3: IMMR */
- lis r3, CFG_IMMRBAR@h
+ lis r3, CFG_IMMR@h
/* run low-level CPU init code (in Flash)*/
bl cpu_init_f
@@ -446,7 +446,7 @@
mtspr SRR1, r3 /* Make SRR1 match MSR */
- lis r3, CFG_IMMRBAR@h
+ lis r3, CFG_IMMR@h
#if defined(CONFIG_WATCHDOG)
/* Initialise the Wathcdog values and reset it (if req) */
/*------------------------------------------------------*/
@@ -870,6 +870,18 @@
dcbz r0,r3
blr
+ .globl ppcDWstore
+ppcDWstore:
+ lfd 1, 0(r4)
+ stfd 1, 0(r3)
+ blr
+
+ .globl ppcDWload
+ppcDWload:
+ lfd 1, 0(r3)
+ stfd 1, 0(r4)
+ blr
+
/*-------------------------------------------------------------------*/
/*
@@ -1189,7 +1201,7 @@
/* When booting from ROM (Flash or EPROM), clear the */
/* Address Mask in OR0 so ROM appears everywhere */
/*----------------------------------------------------*/
- lis r3, (CFG_IMMRBAR)@h /* r3 <= CFG_IMMRBAR */
+ lis r3, (CFG_IMMR)@h /* r3 <= CFG_IMMR */
lwz r4, OR0@l(r3)
li r5, 0x7fff /* r5 <= 0x00007FFFF */
and r4, r4, r5
@@ -1214,8 +1226,15 @@
lis r4, (CFG_FLASH_BASE)@h
ori r4, r4, (CFG_FLASH_BASE)@l
stw r4, LBLAWBAR1(r3) /* LBLAWBAR1 <= CFG_FLASH_BASE */
- lis r4, (0x80000016)@h
- ori r4, r4, (0x80000016)@l
+
+ /* Store 0x80000012 + log2(CFG_FLASH_SIZE) into LBLAWAR1 */
+ lis r4, (0x80000012)@h
+ ori r4, r4, (0x80000012)@l
+ li r5, CFG_FLASH_SIZE
+1: srawi. r5, r5, 1 /* r5 = r5 >> 1 */
+ addi r4, r4, 1
+ bne 1b
+
stw r4, LBLAWAR1(r3) /* LBLAWAR1 <= 8MB Flash Size */
blr
@@ -1234,17 +1253,23 @@
stw r5, BR0(r3) /* r5 <= (CFG_FLASH_BASE & 0xFFFF8000) | (BR0 & 0x00007FFF) */
lwz r4, OR0(r3)
- lis r5, 0xFF80 /* 8M */
+ lis r5, ~((CFG_FLASH_SIZE << 4) - 1)
or r4, r4, r5
- stw r4, OR0(r3) /* OR0 <= OR0 | 0xFF800000 */
+ stw r4, OR0(r3)
lis r4, (CFG_FLASH_BASE)@h
ori r4, r4, (CFG_FLASH_BASE)@l
stw r4, LBLAWBAR0(r3) /* LBLAWBAR0 <= CFG_FLASH_BASE */
- lis r4, (0x80000016)@h
- ori r4, r4, (0x80000016)@l
- stw r4, LBLAWAR0(r3) /* LBLAWAR0 <= 8MB Flash Size */
+ /* Store 0x80000012 + log2(CFG_FLASH_SIZE) into LBLAWAR0 */
+ lis r4, (0x80000012)@h
+ ori r4, r4, (0x80000012)@l
+ li r5, CFG_FLASH_SIZE
+1: srawi. r5, r5, 1 /* r5 = r5 >> 1 */
+ addi r4, r4, 1
+ bne 1b
+ stw r4, LBLAWAR0(r3) /* LBLAWAR0 <= Flash Size */
+
xor r4, r4, r4
stw r4, LBLAWBAR1(r3)
diff --git a/cpu/mpc83xx/traps.c b/cpu/mpc83xx/traps.c
index 44345af..152fa73 100644
--- a/cpu/mpc83xx/traps.c
+++ b/cpu/mpc83xx/traps.c
@@ -1,5 +1,8 @@
/*
- * linux/arch/ppc/kernel/traps.c
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -15,19 +18,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
- *
- * Change log:
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * 20050101: Eran Liberty (liberty@freescale.com)
- * Initial file creating (porting from 85XX & 8260)
*/
/*
diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c
index 03128d3..9b711e2 100644
--- a/cpu/ppc4xx/405gp_pci.c
+++ b/cpu/ppc4xx/405gp_pci.c
@@ -475,7 +475,11 @@
pci_set_region(hose->regions + reg_num++,
CFG_PCI_TARGBASE,
CFG_PCI_MEMBASE,
+#ifdef CFG_PCI_MEMSIZE
+ CFG_PCI_MEMSIZE,
+#else
0x10000000,
+#endif
PCI_REGION_MEM );
#if defined(CONFIG_PCI_SYS_MEM_BUS) && defined(CONFIG_PCI_SYS_MEM_PHYS) && \
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index 81d49ff..427ea94 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -264,10 +264,10 @@
bis->bi_phymode[3] = BI_PHYMODE_ZMII;
break;
case 2:
- zmiifer = ZMII_FER_SMII << ZMII_FER_V(0);
- zmiifer = ZMII_FER_SMII << ZMII_FER_V(1);
- zmiifer = ZMII_FER_SMII << ZMII_FER_V(2);
- zmiifer = ZMII_FER_SMII << ZMII_FER_V(3);
+ zmiifer |= ZMII_FER_SMII << ZMII_FER_V(0);
+ zmiifer |= ZMII_FER_SMII << ZMII_FER_V(1);
+ zmiifer |= ZMII_FER_SMII << ZMII_FER_V(2);
+ zmiifer |= ZMII_FER_SMII << ZMII_FER_V(3);
bis->bi_phymode[0] = BI_PHYMODE_ZMII;
bis->bi_phymode[1] = BI_PHYMODE_ZMII;
bis->bi_phymode[2] = BI_PHYMODE_ZMII;
@@ -470,8 +470,7 @@
#else
if ((devnum == 0) || (devnum == 1)) {
out32 (ZMII_FER, (ZMII_FER_SMII | ZMII_FER_MDI) << ZMII_FER_V (devnum));
- }
- else { /* ((devnum == 2) || (devnum == 3)) */
+ } else { /* ((devnum == 2) || (devnum == 3)) */
out32 (ZMII_FER, ZMII_FER_MDI << ZMII_FER_V (devnum));
out32 (RGMII_FER, ((RGMII_FER_RGMII << RGMII_FER_V (2)) |
(RGMII_FER_RGMII << RGMII_FER_V (3))));
@@ -561,22 +560,7 @@
* otherwise, just check the speeds & feeds
*/
if (hw_p->first_init == 0) {
-#if defined(CONFIG_88E1111_CLK_DELAY)
- /*
- * On some boards (e.g. ALPR) the Marvell 88E1111 PHY needs
- * the "RGMII transmit timing control" and "RGMII receive
- * timing control" bits set, so that Gbit communication works
- * without problems.
- * Also set the "Transmitter disable" to 1 to enable the
- * transmitter.
- * After setting these bits a soft-reset must occur for this
- * change to become active.
- */
- miiphy_read (dev->name, reg, 0x14, ®_short);
- reg_short |= (1 << 7) | (1 << 1) | (1 << 0);
- miiphy_write (dev->name, reg, 0x14, reg_short);
-#endif
-#if defined(CONFIG_M88E1111_PHY) /* test-only: merge with CONFIG_88E1111_CLK_DELAY !!! */
+#if defined(CONFIG_M88E1111_PHY)
miiphy_write (dev->name, reg, 0x14, 0x0ce3);
miiphy_write (dev->name, reg, 0x18, 0x4101);
miiphy_write (dev->name, reg, 0x09, 0x0e00);
@@ -808,7 +792,7 @@
hw_p->rx[i].ctrl |= MAL_RX_CTRL_EMPTY | MAL_RX_CTRL_INTR;
hw_p->rx_ready[i] = -1;
#if 0
- printf ("RX_BUFF %d @ 0x%08lx\n", i, (ulong) rx[i].data_ptr);
+ printf ("RX_BUFF %d @ 0x%08lx\n", i, (ulong) hw_p->rx[i].data_ptr);
#endif
}
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index f4a7208..9c5c910 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -41,6 +41,10 @@
DECLARE_GLOBAL_DATA_PTR;
#endif
+#if defined(CONFIG_BOARD_RESET)
+void board_reset(void);
+#endif
+
#if defined(CONFIG_440)
#define FREQ_EBC (sys_info.freqEPB)
#else
@@ -336,6 +340,10 @@
puts("SP Rev. B");
break;
+ case PVR_440SP_RC:
+ puts("SP Rev. C");
+ break;
+
case PVR_440SPe_RA:
puts("SPe Rev. A");
break;
@@ -422,23 +430,19 @@
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
-#if defined(CONFIG_YOSEMITE) || defined(CONFIG_YELLOWSTONE)
- /*give reset to BCSR*/
- *(unsigned char*)(CFG_BCSR_BASE | 0x06) = 0x09;
-
+#if defined(CONFIG_BOARD_RESET)
+ board_reset();
#else
-
+#if defined(CFG_4xx_RESET_TYPE)
+ mtspr(dbcr0, CFG_4xx_RESET_TYPE << 28);
+#else
/*
* Initiate system reset in debug control register DBCR
*/
- __asm__ __volatile__("lis 3, 0x3000" ::: "r3");
-#if defined(CONFIG_440)
- __asm__ __volatile__("mtspr 0x134, 3");
-#else
- __asm__ __volatile__("mtspr 0x3f2, 3");
-#endif
+ mtspr(dbcr0, 0x30000000);
+#endif /* defined(CFG_4xx_RESET_TYPE) */
+#endif /* defined(CONFIG_BOARD_RESET) */
-#endif/* defined(CONFIG_YOSEMITE) || defined(CONFIG_YELLOWSTONE)*/
return 1;
}
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index def46f1..4b746b0 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -321,6 +321,10 @@
#else
val |= 0xf0000000; /* generate system reset after 2.684 seconds */
#endif
+#if defined(CFG_4xx_RESET_TYPE)
+ val &= ~0x30000000; /* clear WRC bits */
+ val |= CFG_4xx_RESET_TYPE << 28; /* set board specific WRC type */
+#endif
mtspr(tcr, val);
val = mfspr(tsr);
diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c
index faeea5c..f06038e 100644
--- a/cpu/ppc4xx/sdram.c
+++ b/cpu/ppc4xx/sdram.c
@@ -351,6 +351,14 @@
int i;
int tr1_bank1;
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
+ /*
+ * Soft-reset SDRAM controller.
+ */
+ mtsdr(sdr_srst, SDR0_SRST_DMC);
+ mtsdr(sdr_srst, 0x00000000);
+#endif
+
for (i=0; i<N_MB0CF; i++) {
/*
* Disable memory controller.
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 3fe13da..8e000d3 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -204,6 +204,18 @@
mfspr r1,mcsr
mtspr mcsr,r1
#endif
+
+ /*----------------------------------------------------------------*/
+ /* CCR0 init */
+ /*----------------------------------------------------------------*/
+ /* Disable store gathering & broadcast, guarantee inst/data
+ * cache block touch, force load/store alignment
+ * (see errata 1.12: 440_33)
+ */
+ lis r1,0x0030 /* store gathering & broadcast disable */
+ ori r1,r1,0x6000 /* cache touch */
+ mtspr ccr0,r1
+
/*----------------------------------------------------------------*/
/* Initialize debug */
/*----------------------------------------------------------------*/
@@ -225,17 +237,6 @@
mtspr dbsr,r1 /* Clear all valid bits */
skip_debug_init:
- /*----------------------------------------------------------------*/
- /* CCR0 init */
- /*----------------------------------------------------------------*/
- /* Disable store gathering & broadcast, guarantee inst/data
- * cache block touch, force load/store alignment
- * (see errata 1.12: 440_33)
- */
- lis r1,0x0030 /* store gathering & broadcast disable */
- ori r1,r1,0x6000 /* cache touch */
- mtspr ccr0,r1
-
#if defined (CONFIG_440SPE)
/*----------------------------------------------------------------+
| Initialize Core Configuration Reg1.
diff --git a/doc/README.mpc8360emds b/doc/README.mpc8360emds
new file mode 100644
index 0000000..c87469f
--- /dev/null
+++ b/doc/README.mpc8360emds
@@ -0,0 +1,126 @@
+Freescale MPC8360EMDS Board
+-----------------------------------------
+1. Board Switches and Jumpers
+1.0 There are four Dual-In-Line Packages(DIP) Switches on MPC8360EMDS board
+ For some reason, the HW designers describe the switch settings
+ in terms of 0 and 1, and then map that to physical switches where
+ the label "On" refers to logic 0 and "Off" is logic 1.
+
+ Switch bits are numbered 1 through, like, 4 6 8 or 10, but the
+ bits may contribute to signals that are numbered based at 0,
+ and some of those signals may be high-bit-number-0 too. Heed
+ well the names and labels and do not get confused.
+
+ "Off" == 1
+ "On" == 0
+
+ SW18 is switch 18 as silk-screened onto the board.
+ SW4[8] is the bit labled 8 on Switch 4.
+ SW2[1:6] refers to bits labeled 1 through 6 in order on switch 2.
+ SW3[7:1] refers to bits labeled 7 through 1 in order on switch 3.
+ SW3[1:8]= 0000_0001 refers to bits labeled 1 through 6 is set as "On"
+ and bits labeled 8 is set as "Off".
+
+1.1 For the MPC8360E PB PROTO Board
+
+ First, make sure the board default setting is consistent with the
+ document shipped with your board. Then apply the following setting:
+ SW3[1-8]= 0000_0100 (HRCW setting value is performed on local bus)
+ SW4[1-8]= 0011_0000 (Flash boot on local bus)
+ SW9[1-8]= 0110_0110 (PCI Mode enabled. HRCW is read from FLASH)
+ SW10[1-8]= 0000_1000 (core PLL setting)
+ SW11[1-8]= 0000_0100 (SW11 is on the another side of the board)
+ JP6 1-2
+ on board Oscillator: 66M
+
+
+2. Memory Map
+
+2.1. The memory map should look pretty much like this:
+
+ 0x0000_0000 0x7fff_ffff DDR 2G
+ 0x8000_0000 0x8fff_ffff PCI MEM prefetch 256M
+ 0x9000_0000 0x9fff_ffff PCI MEM non-prefetch 256M
+ 0xc000_0000 0xdfff_ffff Empty 512M
+ 0xe000_0000 0xe01f_ffff Int Mem Reg Space 2M
+ 0xe020_0000 0xe02f_ffff Empty 1M
+ 0xe030_0000 0xe03f_ffff PCI IO 1M
+ 0xe040_0000 0xefff_ffff Empty 252M
+ 0xf000_0000 0xf3ff_ffff Local Bus SDRAM 64M
+ 0xf400_0000 0xf7ff_ffff Empty 64M
+ 0xf800_0000 0xf800_7fff BCSR on CS1 32K
+ 0xf800_8000 0xf800_ffff PIB CS4 32K
+ 0xf801_0000 0xf801_7fff PIB CS5 32K
+ 0xfe00_0000 0xfeff_ffff FLASH on CS0 16M
+
+
+3. Definitions
+
+3.1 Explanation of NEW definitions in:
+
+ include/configs/MPC8360EMDS.h
+
+ CONFIG_MPC83XX MPC83xx family for both MPC8349 and MPC8360
+ CONFIG_MPC8360 MPC8360 specific
+ CONFIG_MPC8360EMDS MPC8360EMDS board specific
+
+4. Compilation
+
+ Assuming you're using BASH shell:
+
+ export CROSS_COMPILE=your-cross-compile-prefix
+ cd u-boot
+ make distclean
+ make MPC8360EMDS_config
+ make
+
+ MPC8360 support PCI in host and slave mode.
+
+ To make u-boot support PCI host 66M :
+ 1) DIP SW support PCI mode as described in Section 1.1.
+ 2) Make MPC8360EMDS_HOST_66_config
+
+ To make u-boot support PCI host 33M :
+ 1) DIP SW setting is similar as Section 1.1, except for SW3[4] is 1
+ 2) Make MPC8360EMDS_HOST_33_config
+
+ To make u-boot support PCI slave 66M :
+ 1) DIP SW setting is similar as Section 1.1, except for SW9[3] is 1
+ 2) Make MPC8360EMDS_SLAVE_config
+
+
+5. Downloading and Flashing Images
+
+5.0 Download over serial line using Kermit:
+
+ loadb
+ [Drop to kermit:
+ ^\c
+ send <u-boot-bin-image>
+ c
+ ]
+
+
+ Or via tftp:
+
+ tftp 10000 u-boot.bin
+
+5.1 Reflash U-boot Image using U-boot
+
+ tftp 20000 u-boot.bin
+ protect off fef00000 fef3ffff
+ erase fef00000 fef3ffff
+
+ cp.b 20000 fef00000 xxxx
+
+ or
+
+ cp.b 20000 fef00000 3ffff
+
+
+You have to supply the correct byte count with 'xxxx' from the TFTP result log.
+Maybe 3ffff will work too, that corresponds to the erased sectors.
+
+
+6. Notes
+ 1) The console baudrate for MPC8360EMDS is 115200bps.
diff --git a/drivers/cfi_flash.c b/drivers/cfi_flash.c
index fd0a186..9b10220 100644
--- a/drivers/cfi_flash.c
+++ b/drivers/cfi_flash.c
@@ -4,11 +4,12 @@
*
* Copyright (C) 2003 Arabella Software Ltd.
* Yuli Barcohen <yuli@arabellasw.com>
- * Modified to work with AMD flashes
*
* Copyright (C) 2004
* Ed Okerson
- * Modified to work with little-endian systems.
+ *
+ * Copyright (C) 2006
+ * Tolunay Orkun <listmember@orkun.us>
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -28,17 +29,6 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
- * History
- * 01/20/2004 - combined variants of original driver.
- * 01/22/2004 - Write performance enhancements for parallel chips (Tolunay)
- * 01/23/2004 - Support for x8/x16 chips (Rune Raknerud)
- * 01/27/2004 - Little endian support Ed Okerson
- *
- * Tested Architectures
- * Port Width Chip Width # of banks Flash Chip Board
- * 32 16 1 28F128J3 seranoa/eagle
- * 64 16 1 28F128J3 seranoa/falcon
- *
*/
/* The DEBUG define must be before common to enable debugging */
@@ -54,21 +44,16 @@
* This file implements a Common Flash Interface (CFI) driver for U-Boot.
* The width of the port and the width of the chips are determined at initialization.
* These widths are used to calculate the address for access CFI data structures.
- * It has been tested on an Intel Strataflash implementation and AMD 29F016D.
*
* References
* JEDEC Standard JESD68 - Common Flash Interface (CFI)
* JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes
* Intel Application Note 646 Common Flash Interface (CFI) and Command Sets
* Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet
+ * AMD CFI Specification, Release 2.0 December 1, 2001
+ * AMD/Spansion Application Note: Migration from Single-byte to Three-byte
+ * Device IDs, Publication Number 25538 Revision A, November 8, 2001
*
- * TODO
- *
- * Use Primary Extended Query table (PRI) and Alternate Algorithm Query
- * Table (ALT) to determine if protection is available
- *
- * Add support for other command sets Use the PRI and ALT to determine command set
- * Verify erase and program timeouts.
*/
#ifndef CFG_FLASH_BANKS_LIST
@@ -114,6 +99,10 @@
#define AMD_ADDR_START ((info->portwidth == FLASH_CFI_8BIT) ? 0xAAA : 0x555)
#define AMD_ADDR_ACK ((info->portwidth == FLASH_CFI_8BIT) ? 0x555 : 0x2AA)
+#define FLASH_OFFSET_MANUFACTURER_ID 0x00
+#define FLASH_OFFSET_DEVICE_ID 0x01
+#define FLASH_OFFSET_DEVICE_ID2 0x0E
+#define FLASH_OFFSET_DEVICE_ID3 0x0F
#define FLASH_OFFSET_CFI 0x55
#define FLASH_OFFSET_CFI_RESP 0x10
#define FLASH_OFFSET_PRIMARY_VENDOR 0x13
@@ -135,25 +124,20 @@
#define FLASH_OFFSET_USER_PROTECTION 0x85
#define FLASH_OFFSET_INTEL_PROTECTION 0x81
-
-#define FLASH_MAN_CFI 0x01000000
-
-#define CFI_CMDSET_NONE 0
-#define CFI_CMDSET_INTEL_EXTENDED 1
-#define CFI_CMDSET_AMD_STANDARD 2
-#define CFI_CMDSET_INTEL_STANDARD 3
-#define CFI_CMDSET_AMD_EXTENDED 4
-#define CFI_CMDSET_MITSU_STANDARD 256
-#define CFI_CMDSET_MITSU_EXTENDED 257
-#define CFI_CMDSET_SST 258
-
+#define CFI_CMDSET_NONE 0
+#define CFI_CMDSET_INTEL_EXTENDED 1
+#define CFI_CMDSET_AMD_STANDARD 2
+#define CFI_CMDSET_INTEL_STANDARD 3
+#define CFI_CMDSET_AMD_EXTENDED 4
+#define CFI_CMDSET_MITSU_STANDARD 256
+#define CFI_CMDSET_MITSU_EXTENDED 257
+#define CFI_CMDSET_SST 258
#ifdef CFG_FLASH_CFI_AMD_RESET /* needed for STM_ID_29W320DB on UC100 */
# undef FLASH_CMD_RESET
-# define FLASH_CMD_RESET AMD_CMD_RESET /* use AMD-Reset instead */
+# define FLASH_CMD_RESET AMD_CMD_RESET /* use AMD-Reset instead */
#endif
-
typedef union {
unsigned char c;
unsigned short w;
@@ -168,7 +152,7 @@
volatile unsigned long long *llp;
} cfiptr_t;
-#define NUM_ERASE_REGIONS 4
+#define NUM_ERASE_REGIONS 4 /* max. number of erase regions */
/* use CFG_MAX_FLASH_BANKS_DETECT if defined */
#ifdef CFG_MAX_FLASH_BANKS_DETECT
@@ -200,6 +184,7 @@
static int flash_isequal (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
static int flash_isset (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
static int flash_toggle (flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
+static void flash_read_jedec_ids (flash_info_t * info);
static int flash_detect_cfi (flash_info_t * info);
static int flash_write_cfiword (flash_info_t * info, ulong dest, cfiword_t cword);
static int flash_full_status_check (flash_info_t * info, flash_sect_t sector,
@@ -307,7 +292,7 @@
}
/*-----------------------------------------------------------------------
- * read a long word by picking the least significant byte of each maiximum
+ * read a long word by picking the least significant byte of each maximum
* port size word. Swap for ppc format.
*/
ulong flash_read_long (flash_info_t * info, flash_sect_t sect, uint offset)
@@ -529,14 +514,42 @@
(info->portwidth << 3), (info->chipwidth << 3));
printf (" Size: %ld MB in %d Sectors\n",
info->size >> 20, info->sector_count);
- printf (" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n",
+ printf (" ");
+ switch (info->vendor) {
+ case CFI_CMDSET_INTEL_STANDARD:
+ printf ("Intel Standard");
+ break;
+ case CFI_CMDSET_INTEL_EXTENDED:
+ printf ("Intel Extended");
+ break;
+ case CFI_CMDSET_AMD_STANDARD:
+ printf ("AMD Standard");
+ break;
+ case CFI_CMDSET_AMD_EXTENDED:
+ printf ("AMD Extended");
+ break;
+ default:
+ printf ("Unknown (%d)", info->vendor);
+ break;
+ }
+ printf (" command set, Manufacturer ID: 0x%02X, Device ID: 0x%02X",
+ info->manufacturer_id, info->device_id);
+ if (info->device_id == 0x7E) {
+ printf("%04X", info->device_id2);
+ }
+ printf ("\n Erase timeout: %ld ms, write timeout: %ld ms\n",
info->erase_blk_tout,
- info->write_tout,
+ info->write_tout);
+ if (info->buffer_size > 1) {
+ printf (" Buffer write timeout: %ld ms, buffer size: %d bytes\n",
info->buffer_write_tout,
info->buffer_size);
+ }
- puts (" Sector Start Addresses:");
+ puts ("\n Sector Start Addresses:");
for (i = 0; i < info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n");
#ifdef CFG_FLASH_EMPTY_INFO
int k;
int size;
@@ -560,18 +573,15 @@
}
}
- if ((i % 5) == 0)
- printf ("\n");
/* print empty and read-only info */
- printf (" %08lX%s%s",
+ printf (" %08lX %c %s ",
info->start[i],
- erased ? " E" : " ",
- info->protect[i] ? "RO " : " ");
+ erased ? 'E' : ' ',
+ info->protect[i] ? "RO" : " ");
#else /* ! CFG_FLASH_EMPTY_INFO */
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i], info->protect[i] ? " (RO)" : " ");
+ printf (" %08lX %s ",
+ info->start[i],
+ info->protect[i] ? "RO" : " ");
#endif
}
putc ('\n');
@@ -1071,6 +1081,55 @@
}
/*-----------------------------------------------------------------------
+ * read jedec ids from device and set corresponding fields in info struct
+ *
+ * Note: assume cfi->vendor, cfi->portwidth and cfi->chipwidth are correct
+ *
+*/
+static void flash_read_jedec_ids (flash_info_t * info)
+{
+ info->manufacturer_id = 0;
+ info->device_id = 0;
+ info->device_id2 = 0;
+
+ switch (info->vendor) {
+ case CFI_CMDSET_INTEL_STANDARD:
+ case CFI_CMDSET_INTEL_EXTENDED:
+ flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+ flash_write_cmd(info, 0, 0, FLASH_CMD_READ_ID);
+ udelay(1000); /* some flash are slow to respond */
+ info->manufacturer_id = flash_read_uchar (info,
+ FLASH_OFFSET_MANUFACTURER_ID);
+ info->device_id = flash_read_uchar (info,
+ FLASH_OFFSET_DEVICE_ID);
+ flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+ break;
+ case CFI_CMDSET_AMD_STANDARD:
+ case CFI_CMDSET_AMD_EXTENDED:
+ flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
+ flash_unlock_seq(info, 0);
+ flash_write_cmd(info, 0, AMD_ADDR_START, FLASH_CMD_READ_ID);
+ udelay(1000); /* some flash are slow to respond */
+ info->manufacturer_id = flash_read_uchar (info,
+ FLASH_OFFSET_MANUFACTURER_ID);
+ info->device_id = flash_read_uchar (info,
+ FLASH_OFFSET_DEVICE_ID);
+ if (info->device_id == 0x7E) {
+ /* AMD 3-byte (expanded) device ids */
+ info->device_id2 = flash_read_uchar (info,
+ FLASH_OFFSET_DEVICE_ID2);
+ info->device_id2 <<= 8;
+ info->device_id2 |= flash_read_uchar (info,
+ FLASH_OFFSET_DEVICE_ID3);
+ }
+ flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
+ break;
+ default:
+ break;
+ }
+}
+
+/*-----------------------------------------------------------------------
* detect if flash is compatible with the Common Flash Interface (CFI)
* http://www.jedec.org/download/search/jesd68.pdf
*
@@ -1120,15 +1179,31 @@
uchar num_erase_regions;
int erase_region_size;
int erase_region_count;
+ int geometry_reversed = 0;
+
+ info->ext_addr = 0;
+ info->cfi_version = 0;
#ifdef CFG_FLASH_PROTECTION
- int ext_addr;
info->legacy_unlock = 0;
#endif
info->start[0] = base;
if (flash_detect_cfi (info)) {
- info->vendor = flash_read_ushort (info, 0, FLASH_OFFSET_PRIMARY_VENDOR);
+ info->vendor = flash_read_ushort (info, 0,
+ FLASH_OFFSET_PRIMARY_VENDOR);
+ flash_read_jedec_ids (info);
+ flash_write_cmd (info, 0, FLASH_OFFSET_CFI, FLASH_CMD_CFI);
+ num_erase_regions = flash_read_uchar (info,
+ FLASH_OFFSET_NUM_ERASE_REGIONS);
+ info->ext_addr = flash_read_ushort (info, 0,
+ FLASH_OFFSET_EXT_QUERY_T_P_ADDR);
+ if (info->ext_addr) {
+ info->cfi_version = (ushort) flash_read_uchar (info,
+ info->ext_addr + 3) << 8;
+ info->cfi_version |= (ushort) flash_read_uchar (info,
+ info->ext_addr + 4);
+ }
#ifdef DEBUG
flash_printqry (info, 0);
#endif
@@ -1139,26 +1214,46 @@
info->cmd_reset = FLASH_CMD_RESET;
#ifdef CFG_FLASH_PROTECTION
/* read legacy lock/unlock bit from intel flash */
- ext_addr = flash_read_ushort (info, 0,
- FLASH_OFFSET_EXT_QUERY_T_P_ADDR);
- info->legacy_unlock =
- flash_read_uchar (info, ext_addr + 5) & 0x08;
+ if (info->ext_addr) {
+ info->legacy_unlock = flash_read_uchar (info,
+ info->ext_addr + 5) & 0x08;
+ }
#endif
break;
case CFI_CMDSET_AMD_STANDARD:
case CFI_CMDSET_AMD_EXTENDED:
info->cmd_reset = AMD_CMD_RESET;
+ /* check if flash geometry needs reversal */
+ if (num_erase_regions <= 1)
+ break;
+ /* reverse geometry if top boot part */
+ if (info->cfi_version < 0x3131) {
+ /* CFI < 1.1, try to guess from device id */
+ if ((info->device_id & 0x80) != 0) {
+ geometry_reversed = 1;
+ }
+ break;
+ }
+ /* CFI >= 1.1, deduct from top/bottom flag */
+ /* note: ext_addr is valid since cfi_version > 0 */
+ if (flash_read_uchar(info, info->ext_addr + 0xf) == 3) {
+ geometry_reversed = 1;
+ }
break;
}
debug ("manufacturer is %d\n", info->vendor);
+ debug ("manufacturer id is 0x%x\n", info->manufacturer_id);
+ debug ("device id is 0x%x\n", info->device_id);
+ debug ("device id2 is 0x%x\n", info->device_id2);
+ debug ("cfi version is 0x%04x\n", info->cfi_version);
+
size_ratio = info->portwidth / info->chipwidth;
/* if the chip is x8/x16 reduce the ratio by half */
if ((info->interface == FLASH_CFI_X8X16)
&& (info->chipwidth == FLASH_CFI_BY8)) {
size_ratio >>= 1;
}
- num_erase_regions = flash_read_uchar (info, FLASH_OFFSET_NUM_ERASE_REGIONS);
debug ("size_ratio %d port %d bits chip %d bits\n",
size_ratio, info->portwidth << CFI_FLASH_SHIFT_WIDTH,
info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
@@ -1171,7 +1266,12 @@
num_erase_regions, NUM_ERASE_REGIONS);
break;
}
- tmp = flash_read_long (info, 0,
+ if (geometry_reversed)
+ tmp = flash_read_long (info, 0,
+ FLASH_OFFSET_ERASE_REGIONS +
+ (num_erase_regions - 1 - i) * 4);
+ else
+ tmp = flash_read_long (info, 0,
FLASH_OFFSET_ERASE_REGIONS +
i * 4);
erase_region_size =
diff --git a/drivers/fsl_i2c.c b/drivers/fsl_i2c.c
index 65c2743..c929096 100644
--- a/drivers/fsl_i2c.c
+++ b/drivers/fsl_i2c.c
@@ -28,29 +28,52 @@
#include <asm/fsl_i2c.h> /* HW definitions */
#define I2C_TIMEOUT (CFG_HZ / 4)
-#define I2C ((struct fsl_i2c *)(CFG_IMMR + CFG_I2C_OFFSET))
+#define I2C_READ_BIT 1
+#define I2C_WRITE_BIT 0
+
+/* Initialize the bus pointer to whatever one the SPD EEPROM is on.
+ * Default is bus 0. This is necessary because the DDR initialization
+ * runs from ROM, and we can't switch buses because we can't modify
+ * the global variables.
+ */
+#ifdef CFG_SPD_BUS_NUM
+static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = CFG_SPD_BUS_NUM;
+#else
+static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = 0;
+#endif
+
+static volatile struct fsl_i2c *i2c_dev[2] = {
+ (struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET),
+#ifdef CFG_I2C2_OFFSET
+ (struct fsl_i2c *) (CFG_IMMR + CFG_I2C2_OFFSET)
+#endif
+};
void
i2c_init(int speed, int slaveadd)
{
- /* stop I2C controller */
- writeb(0x0, &I2C->cr);
+ volatile struct fsl_i2c *dev;
- /* set clock */
- writeb(0x3f, &I2C->fdr);
+ dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET);
- /* set default filter */
- writeb(0x10, &I2C->dfsrr);
+ writeb(0, &dev->cr); /* stop I2C controller */
+ writeb(0x3F, &dev->fdr); /* set bus speed */
+ writeb(0x3F, &dev->dfsrr); /* set default filter */
+ writeb(slaveadd << 1, &dev->adr); /* write slave address */
+ writeb(0x0, &dev->sr); /* clear status register */
+ writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */
- /* write slave address */
- writeb(slaveadd, &I2C->adr);
+#ifdef CFG_I2C2_OFFSET
+ dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C2_OFFSET);
- /* clear status register */
- writeb(0x0, &I2C->sr);
-
- /* start I2C controller */
- writeb(I2C_CR_MEN, &I2C->cr);
+ writeb(0, &dev->cr); /* stop I2C controller */
+ writeb(0x3F, &dev->fdr); /* set bus speed */
+ writeb(0x3F, &dev->dfsrr); /* set default filter */
+ writeb(slaveadd, &dev->adr); /* write slave address */
+ writeb(0x0, &dev->sr); /* clear status register */
+ writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */
+#endif /* CFG_I2C2_OFFSET */
}
static __inline__ int
@@ -58,7 +81,7 @@
{
ulong timeval = get_timer(0);
- while (readb(&I2C->sr) & I2C_SR_MBB) {
+ while (readb(&i2c_dev[i2c_bus_num]->sr) & I2C_SR_MBB) {
if (get_timer(timeval) > I2C_TIMEOUT) {
return -1;
}
@@ -74,11 +97,11 @@
ulong timeval = get_timer(0);
do {
- csr = readb(&I2C->sr);
+ csr = readb(&i2c_dev[i2c_bus_num]->sr);
if (!(csr & I2C_SR_MIF))
continue;
- writeb(0x0, &I2C->sr);
+ writeb(0x0, &i2c_dev[i2c_bus_num]->sr);
if (csr & I2C_SR_MAL) {
debug("i2c_wait: MAL\n");
@@ -90,7 +113,7 @@
return -1;
}
- if (write == I2C_WRITE && (csr & I2C_SR_RXAK)) {
+ if (write == I2C_WRITE_BIT && (csr & I2C_SR_RXAK)) {
debug("i2c_wait: No RXACK\n");
return -1;
}
@@ -107,11 +130,11 @@
{
writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX
| (rsta ? I2C_CR_RSTA : 0),
- &I2C->cr);
+ &i2c_dev[i2c_bus_num]->cr);
- writeb((dev << 1) | dir, &I2C->dr);
+ writeb((dev << 1) | dir, &i2c_dev[i2c_bus_num]->dr);
- if (i2c_wait(I2C_WRITE) < 0)
+ if (i2c_wait(I2C_WRITE_BIT) < 0)
return 0;
return 1;
@@ -123,12 +146,12 @@
int i;
writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX,
- &I2C->cr);
+ &i2c_dev[i2c_bus_num]->cr);
for (i = 0; i < length; i++) {
- writeb(data[i], &I2C->dr);
+ writeb(data[i], &i2c_dev[i2c_bus_num]->dr);
- if (i2c_wait(I2C_WRITE) < 0)
+ if (i2c_wait(I2C_WRITE_BIT) < 0)
break;
}
@@ -141,25 +164,25 @@
int i;
writeb(I2C_CR_MEN | I2C_CR_MSTA | ((length == 1) ? I2C_CR_TXAK : 0),
- &I2C->cr);
+ &i2c_dev[i2c_bus_num]->cr);
/* dummy read */
- readb(&I2C->dr);
+ readb(&i2c_dev[i2c_bus_num]->dr);
for (i = 0; i < length; i++) {
- if (i2c_wait(I2C_READ) < 0)
+ if (i2c_wait(I2C_READ_BIT) < 0)
break;
/* Generate ack on last next to last byte */
if (i == length - 2)
writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_TXAK,
- &I2C->cr);
+ &i2c_dev[i2c_bus_num]->cr);
/* Generate stop on last byte */
if (i == length - 1)
- writeb(I2C_CR_MEN | I2C_CR_TXAK, &I2C->cr);
+ writeb(I2C_CR_MEN | I2C_CR_TXAK, &i2c_dev[i2c_bus_num]->cr);
- data[i] = readb(&I2C->dr);
+ data[i] = readb(&i2c_dev[i2c_bus_num]->dr);
}
return i;
@@ -172,13 +195,13 @@
u8 *a = (u8*)&addr;
if (i2c_wait4bus() >= 0
- && i2c_write_addr(dev, I2C_WRITE, 0) != 0
+ && i2c_write_addr(dev, I2C_WRITE_BIT, 0) != 0
&& __i2c_write(&a[4 - alen], alen) == alen
- && i2c_write_addr(dev, I2C_READ, 1) != 0) {
+ && i2c_write_addr(dev, I2C_READ_BIT, 1) != 0) {
i = __i2c_read(data, length);
}
- writeb(I2C_CR_MEN, &I2C->cr);
+ writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr);
if (i == length)
return 0;
@@ -193,12 +216,12 @@
u8 *a = (u8*)&addr;
if (i2c_wait4bus() >= 0
- && i2c_write_addr(dev, I2C_WRITE, 0) != 0
+ && i2c_write_addr(dev, I2C_WRITE_BIT, 0) != 0
&& __i2c_write(&a[4 - alen], alen) == alen) {
i = __i2c_write(data, length);
}
- writeb(I2C_CR_MEN, &I2C->cr);
+ writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr);
if (i == length)
return 0;
@@ -237,5 +260,34 @@
i2c_write(i2c_addr, reg, 1, &val, 1);
}
+int i2c_set_bus_num(unsigned int bus)
+{
+#ifdef CFG_I2C2_OFFSET
+ if (bus > 1) {
+#else
+ if (bus > 0) {
+#endif
+ return -1;
+ }
+
+ i2c_bus_num = bus;
+
+ return 0;
+}
+
+int i2c_set_bus_speed(unsigned int speed)
+{
+ return -1;
+}
+
+unsigned int i2c_get_bus_num(void)
+{
+ return i2c_bus_num;
+}
+
+unsigned int i2c_get_bus_speed(void)
+{
+ return 0;
+}
#endif /* CONFIG_HARD_I2C */
#endif /* CONFIG_FSL_I2C */
diff --git a/drivers/nand/nand_base.c b/drivers/nand/nand_base.c
index 95d6e4e..7fdf57b 100644
--- a/drivers/nand/nand_base.c
+++ b/drivers/nand/nand_base.c
@@ -838,9 +838,9 @@
unsigned long timeo;
if (state == FL_ERASING)
- timeo = CFG_HZ * 400;
+ timeo = (CFG_HZ * 400) / 1000;
else
- timeo = CFG_HZ * 20;
+ timeo = (CFG_HZ * 20) / 1000;
if ((state == FL_ERASING) && (this->options & NAND_IS_AND))
this->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1);
@@ -852,8 +852,8 @@
while (1) {
if (get_timer(0) > timeo) {
printf("Timeout!");
- return 0;
- }
+ return 0x01;
+ }
if (this->dev_ready) {
if (this->dev_ready(mtd))
@@ -1713,6 +1713,7 @@
goto out;
}
*retlen = written;
+ bufstart = (u_char*) &buf[written];
ofs = autoplace ? mtd->oobavail : mtd->oobsize;
if (eccbuf)
@@ -2407,7 +2408,7 @@
}
if (!nand_flash_ids[i].name) {
-#if !defined(CONFIG_TQM8272)
+#ifndef CFG_NAND_QUIET_TEST
printk (KERN_WARNING "No NAND device found!!!\n");
#endif
this->select_chip(mtd, -1);
diff --git a/drivers/qe/Makefile b/drivers/qe/Makefile
new file mode 100644
index 0000000..4844181
--- /dev/null
+++ b/drivers/qe/Makefile
@@ -0,0 +1,43 @@
+#
+# Copyright (C) 2006 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB := $(obj)qe.a
+
+COBJS := qe.o uccf.o uec.o uec_phy.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
new file mode 100644
index 0000000..5f20962
--- /dev/null
+++ b/drivers/qe/qe.c
@@ -0,0 +1,254 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ * based on source code of Shlomi Gridish
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "common.h"
+#include "asm/errno.h"
+#include "asm/io.h"
+#include "asm/immap_qe.h"
+#include "qe.h"
+
+#if defined(CONFIG_QE)
+qe_map_t *qe_immr = NULL;
+static qe_snum_t snums[QE_NUM_OF_SNUM];
+
+void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data)
+{
+ u32 cecr;
+
+ if (cmd == QE_RESET) {
+ out_be32(&qe_immr->cp.cecr,(u32) (cmd | QE_CR_FLG));
+ } else {
+ out_be32(&qe_immr->cp.cecdr, cmd_data);
+ out_be32(&qe_immr->cp.cecr, (sbc | QE_CR_FLG |
+ ((u32) mcn<<QE_CR_PROTOCOL_SHIFT) | cmd));
+ }
+ /* Wait for the QE_CR_FLG to clear */
+ do {
+ cecr = in_be32(&qe_immr->cp.cecr);
+ } while (cecr & QE_CR_FLG);
+
+ return;
+}
+
+uint qe_muram_alloc(uint size, uint align)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ uint retloc;
+ uint align_mask, off;
+ uint savebase;
+
+ align_mask = align - 1;
+ savebase = gd->mp_alloc_base;
+
+ if ((off = (gd->mp_alloc_base & align_mask)) != 0)
+ gd->mp_alloc_base += (align - off);
+
+ if ((off = size & align_mask) != 0)
+ size += (align - off);
+
+ if ((gd->mp_alloc_base + size) >= gd->mp_alloc_top) {
+ gd->mp_alloc_base = savebase;
+ printf("%s: ran out of ram.\n", __FUNCTION__);
+ }
+
+ retloc = gd->mp_alloc_base;
+ gd->mp_alloc_base += size;
+
+ memset((void *)&qe_immr->muram[retloc], 0, size);
+
+ __asm__ __volatile__("sync");
+
+ return retloc;
+}
+
+void *qe_muram_addr(uint offset)
+{
+ return (void *)&qe_immr->muram[offset];
+}
+
+static void qe_sdma_init(void)
+{
+ volatile sdma_t *p;
+ uint sdma_buffer_base;
+
+ p = (volatile sdma_t *)&qe_immr->sdma;
+
+ /* All of DMA transaction in bus 1 */
+ out_be32(&p->sdaqr, 0);
+ out_be32(&p->sdaqmr, 0);
+
+ /* Allocate 2KB temporary buffer for sdma */
+ sdma_buffer_base = qe_muram_alloc(2048, 64);
+ out_be32(&p->sdwbcr, sdma_buffer_base & QE_SDEBCR_BA_MASK);
+
+ /* Clear sdma status */
+ out_be32(&p->sdsr, 0x03000000);
+
+ /* Enable global mode on bus 1, and 2KB buffer size */
+ out_be32(&p->sdmr, QE_SDMR_GLB_1_MSK | (0x3 << QE_SDMR_CEN_SHIFT));
+}
+
+static u8 thread_snum[QE_NUM_OF_SNUM] = {
+ 0x04, 0x05, 0x0c, 0x0d,
+ 0x14, 0x15, 0x1c, 0x1d,
+ 0x24, 0x25, 0x2c, 0x2d,
+ 0x34, 0x35, 0x88, 0x89,
+ 0x98, 0x99, 0xa8, 0xa9,
+ 0xb8, 0xb9, 0xc8, 0xc9,
+ 0xd8, 0xd9, 0xe8, 0xe9
+};
+
+static void qe_snums_init(void)
+{
+ int i;
+
+ for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+ snums[i].state = QE_SNUM_STATE_FREE;
+ snums[i].num = thread_snum[i];
+ }
+}
+
+int qe_get_snum(void)
+{
+ int snum = -EBUSY;
+ int i;
+
+ for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+ if (snums[i].state == QE_SNUM_STATE_FREE) {
+ snums[i].state = QE_SNUM_STATE_USED;
+ snum = snums[i].num;
+ break;
+ }
+ }
+
+ return snum;
+}
+
+void qe_put_snum(u8 snum)
+{
+ int i;
+
+ for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+ if (snums[i].num == snum) {
+ snums[i].state = QE_SNUM_STATE_FREE;
+ break;
+ }
+ }
+}
+
+void qe_init(uint qe_base)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /* Init the QE IMMR base */
+ qe_immr = (qe_map_t *)qe_base;
+
+ gd->mp_alloc_base = QE_DATAONLY_BASE;
+ gd->mp_alloc_top = gd->mp_alloc_base + QE_DATAONLY_SIZE;
+
+ qe_sdma_init();
+ qe_snums_init();
+}
+
+void qe_reset(void)
+{
+ qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID,
+ (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
+}
+
+void qe_assign_page(uint snum, uint para_ram_base)
+{
+ u32 cecr;
+
+ out_be32(&qe_immr->cp.cecdr, para_ram_base);
+ out_be32(&qe_immr->cp.cecr, ((u32) snum<<QE_CR_ASSIGN_PAGE_SNUM_SHIFT)
+ | QE_CR_FLG | QE_ASSIGN_PAGE);
+
+ /* Wait for the QE_CR_FLG to clear */
+ do {
+ cecr = in_be32(&qe_immr->cp.cecr);
+ } while (cecr & QE_CR_FLG );
+
+ return;
+}
+
+/*
+ * brg: 0~15 as BRG1~BRG16
+ rate: baud rate
+ * BRG input clock comes from the BRGCLK (internal clock generated from
+ the QE clock, it is one-half of the QE clock), If need the clock source
+ from CLKn pin, we have te change the function.
+ */
+
+#define BRG_CLK (gd->brg_clk)
+
+int qe_set_brg(uint brg, uint rate)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ volatile uint *bp;
+ u32 divisor;
+ int div16 = 0;
+
+ if (brg >= QE_NUM_OF_BRGS)
+ return -EINVAL;
+ bp = (uint *)&qe_immr->brg.brgc1;
+ bp += brg;
+
+ divisor = (BRG_CLK / rate);
+ if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
+ div16 = 1;
+ divisor /= 16;
+ }
+
+ *bp = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE;
+ __asm__ __volatile__("sync");
+
+ if (div16) {
+ *bp |= QE_BRGC_DIV16;
+ __asm__ __volatile__("sync");
+ }
+
+ return 0;
+}
+
+/* Set ethernet MII clock master
+*/
+int qe_set_mii_clk_src(int ucc_num)
+{
+ u32 cmxgcr;
+
+ /* check if the UCC number is in range. */
+ if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) {
+ printf("%s: ucc num not in ranges\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ cmxgcr = in_be32(&qe_immr->qmx.cmxgcr);
+ cmxgcr &= ~QE_CMXGCR_MII_ENET_MNG_MASK;
+ cmxgcr |= (ucc_num <<QE_CMXGCR_MII_ENET_MNG_SHIFT);
+ out_be32(&qe_immr->qmx.cmxgcr, cmxgcr);
+
+ return 0;
+}
+
+#endif /* CONFIG_QE */
diff --git a/drivers/qe/qe.h b/drivers/qe/qe.h
new file mode 100644
index 0000000..f7f8ed0
--- /dev/null
+++ b/drivers/qe/qe.h
@@ -0,0 +1,237 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ * based on source code of Shlomi Gridish
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __QE_H__
+#define __QE_H__
+
+#include "common.h"
+
+#define QE_NUM_OF_SNUM 28
+#define QE_NUM_OF_BRGS 16
+#define UCC_MAX_NUM 8
+
+#define QE_DATAONLY_BASE (uint)(128)
+#define QE_DATAONLY_SIZE ((uint)(0xc000) - QE_DATAONLY_BASE)
+
+/* QE threads SNUM
+*/
+typedef enum qe_snum_state {
+ QE_SNUM_STATE_USED, /* used */
+ QE_SNUM_STATE_FREE /* free */
+} qe_snum_state_e;
+
+typedef struct qe_snum {
+ u8 num; /* snum */
+ qe_snum_state_e state; /* state */
+} qe_snum_t;
+
+/* QE RISC allocation
+*/
+typedef enum qe_risc_allocation {
+ QE_RISC_ALLOCATION_RISC1 = 1, /* RISC 1 */
+ QE_RISC_ALLOCATION_RISC2 = 2, /* RISC 2 */
+ QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3 /* RISC 1 or RISC 2 */
+} qe_risc_allocation_e;
+
+/* QE CECR commands for UCC fast.
+*/
+#define QE_CR_FLG 0x00010000
+#define QE_RESET 0x80000000
+#define QE_INIT_TX_RX 0x00000000
+#define QE_INIT_RX 0x00000001
+#define QE_INIT_TX 0x00000002
+#define QE_ENTER_HUNT_MODE 0x00000003
+#define QE_STOP_TX 0x00000004
+#define QE_GRACEFUL_STOP_TX 0x00000005
+#define QE_RESTART_TX 0x00000006
+#define QE_SWITCH_COMMAND 0x00000007
+#define QE_SET_GROUP_ADDRESS 0x00000008
+#define QE_INSERT_CELL 0x00000009
+#define QE_ATM_TRANSMIT 0x0000000a
+#define QE_CELL_POOL_GET 0x0000000b
+#define QE_CELL_POOL_PUT 0x0000000c
+#define QE_IMA_HOST_CMD 0x0000000d
+#define QE_ATM_MULTI_THREAD_INIT 0x00000011
+#define QE_ASSIGN_PAGE 0x00000012
+#define QE_START_FLOW_CONTROL 0x00000014
+#define QE_STOP_FLOW_CONTROL 0x00000015
+#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016
+#define QE_GRACEFUL_STOP_RX 0x0000001a
+#define QE_RESTART_RX 0x0000001b
+
+/* QE CECR Sub Block Code - sub block code of QE command.
+*/
+#define QE_CR_SUBBLOCK_INVALID 0x00000000
+#define QE_CR_SUBBLOCK_USB 0x03200000
+#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000
+#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000
+#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000
+#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000
+#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000
+#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000
+#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000
+#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000
+#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000
+#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000
+#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000
+#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000
+#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000
+#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000
+#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000
+#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000
+#define QE_CR_SUBBLOCK_MCC1 0x03800000
+#define QE_CR_SUBBLOCK_MCC2 0x03a00000
+#define QE_CR_SUBBLOCK_MCC3 0x03000000
+#define QE_CR_SUBBLOCK_IDMA1 0x02800000
+#define QE_CR_SUBBLOCK_IDMA2 0x02a00000
+#define QE_CR_SUBBLOCK_IDMA3 0x02c00000
+#define QE_CR_SUBBLOCK_IDMA4 0x02e00000
+#define QE_CR_SUBBLOCK_HPAC 0x01e00000
+#define QE_CR_SUBBLOCK_SPI1 0x01400000
+#define QE_CR_SUBBLOCK_SPI2 0x01600000
+#define QE_CR_SUBBLOCK_RAND 0x01c00000
+#define QE_CR_SUBBLOCK_TIMER 0x01e00000
+#define QE_CR_SUBBLOCK_GENERAL 0x03c00000
+
+/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command.
+*/
+#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */
+#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00
+#define QE_CR_PROTOCOL_ATM_POS 0x0A
+#define QE_CR_PROTOCOL_ETHERNET 0x0C
+#define QE_CR_PROTOCOL_L2_SWITCH 0x0D
+#define QE_CR_PROTOCOL_SHIFT 6
+
+/* QE ASSIGN PAGE command
+*/
+#define QE_CR_ASSIGN_PAGE_SNUM_SHIFT 17
+
+/* Communication Direction.
+*/
+typedef enum comm_dir {
+ COMM_DIR_NONE = 0,
+ COMM_DIR_RX = 1,
+ COMM_DIR_TX = 2,
+ COMM_DIR_RX_AND_TX = 3
+} comm_dir_e;
+
+/* Clocks and BRG's
+*/
+typedef enum qe_clock {
+ QE_CLK_NONE = 0,
+ QE_BRG1, /* Baud Rate Generator 1 */
+ QE_BRG2, /* Baud Rate Generator 2 */
+ QE_BRG3, /* Baud Rate Generator 3 */
+ QE_BRG4, /* Baud Rate Generator 4 */
+ QE_BRG5, /* Baud Rate Generator 5 */
+ QE_BRG6, /* Baud Rate Generator 6 */
+ QE_BRG7, /* Baud Rate Generator 7 */
+ QE_BRG8, /* Baud Rate Generator 8 */
+ QE_BRG9, /* Baud Rate Generator 9 */
+ QE_BRG10, /* Baud Rate Generator 10 */
+ QE_BRG11, /* Baud Rate Generator 11 */
+ QE_BRG12, /* Baud Rate Generator 12 */
+ QE_BRG13, /* Baud Rate Generator 13 */
+ QE_BRG14, /* Baud Rate Generator 14 */
+ QE_BRG15, /* Baud Rate Generator 15 */
+ QE_BRG16, /* Baud Rate Generator 16 */
+ QE_CLK1, /* Clock 1 */
+ QE_CLK2, /* Clock 2 */
+ QE_CLK3, /* Clock 3 */
+ QE_CLK4, /* Clock 4 */
+ QE_CLK5, /* Clock 5 */
+ QE_CLK6, /* Clock 6 */
+ QE_CLK7, /* Clock 7 */
+ QE_CLK8, /* Clock 8 */
+ QE_CLK9, /* Clock 9 */
+ QE_CLK10, /* Clock 10 */
+ QE_CLK11, /* Clock 11 */
+ QE_CLK12, /* Clock 12 */
+ QE_CLK13, /* Clock 13 */
+ QE_CLK14, /* Clock 14 */
+ QE_CLK15, /* Clock 15 */
+ QE_CLK16, /* Clock 16 */
+ QE_CLK17, /* Clock 17 */
+ QE_CLK18, /* Clock 18 */
+ QE_CLK19, /* Clock 19 */
+ QE_CLK20, /* Clock 20 */
+ QE_CLK21, /* Clock 21 */
+ QE_CLK22, /* Clock 22 */
+ QE_CLK23, /* Clock 23 */
+ QE_CLK24, /* Clock 24 */
+ QE_CLK_DUMMY
+} qe_clock_e;
+
+/* QE CMXGCR register
+*/
+#define QE_CMXGCR_MII_ENET_MNG_MASK 0x00007000
+#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12
+
+/* QE CMXUCR registers
+ */
+#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F
+
+/* QE BRG configuration register
+*/
+#define QE_BRGC_ENABLE 0x00010000
+#define QE_BRGC_DIVISOR_SHIFT 1
+#define QE_BRGC_DIVISOR_MAX 0xFFF
+#define QE_BRGC_DIV16 1
+
+/* QE SDMA registers
+*/
+#define QE_SDSR_BER1 0x02000000
+#define QE_SDSR_BER2 0x01000000
+
+#define QE_SDMR_GLB_1_MSK 0x80000000
+#define QE_SDMR_ADR_SEL 0x20000000
+#define QE_SDMR_BER1_MSK 0x02000000
+#define QE_SDMR_BER2_MSK 0x01000000
+#define QE_SDMR_EB1_MSK 0x00800000
+#define QE_SDMR_ER1_MSK 0x00080000
+#define QE_SDMR_ER2_MSK 0x00040000
+#define QE_SDMR_CEN_MASK 0x0000E000
+#define QE_SDMR_SBER_1 0x00000200
+#define QE_SDMR_SBER_2 0x00000200
+#define QE_SDMR_EB1_PR_MASK 0x000000C0
+#define QE_SDMR_ER1_PR 0x00000008
+
+#define QE_SDMR_CEN_SHIFT 13
+#define QE_SDMR_EB1_PR_SHIFT 6
+
+#define QE_SDTM_MSNUM_SHIFT 24
+
+#define QE_SDEBCR_BA_MASK 0x01FFFFFF
+
+void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign);
+void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data);
+uint qe_muram_alloc(uint size, uint align);
+void *qe_muram_addr(uint offset);
+int qe_get_snum(void);
+void qe_put_snum(u8 snum);
+void qe_init(uint qe_base);
+void qe_reset(void);
+void qe_assign_page(uint snum, uint para_ram_base);
+int qe_set_brg(uint brg, uint rate);
+int qe_set_mii_clk_src(int ucc_num);
+
+#endif /* __QE_H__ */
diff --git a/drivers/qe/uccf.c b/drivers/qe/uccf.c
new file mode 100644
index 0000000..c5477e0
--- /dev/null
+++ b/drivers/qe/uccf.c
@@ -0,0 +1,404 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ * based on source code of Shlomi Gridish
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "common.h"
+#include "malloc.h"
+#include "asm/errno.h"
+#include "asm/io.h"
+#include "asm/immap_qe.h"
+#include "qe.h"
+#include "uccf.h"
+
+#if defined(CONFIG_QE)
+void ucc_fast_transmit_on_demand(ucc_fast_private_t *uccf)
+{
+ out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD);
+}
+
+u32 ucc_fast_get_qe_cr_subblock(int ucc_num)
+{
+ switch (ucc_num) {
+ case 0: return QE_CR_SUBBLOCK_UCCFAST1;
+ case 1: return QE_CR_SUBBLOCK_UCCFAST2;
+ case 2: return QE_CR_SUBBLOCK_UCCFAST3;
+ case 3: return QE_CR_SUBBLOCK_UCCFAST4;
+ case 4: return QE_CR_SUBBLOCK_UCCFAST5;
+ case 5: return QE_CR_SUBBLOCK_UCCFAST6;
+ case 6: return QE_CR_SUBBLOCK_UCCFAST7;
+ case 7: return QE_CR_SUBBLOCK_UCCFAST8;
+ default: return QE_CR_SUBBLOCK_INVALID;
+ }
+}
+
+static void ucc_get_cmxucr_reg(int ucc_num, volatile u32 **p_cmxucr,
+ u8 *reg_num, u8 *shift)
+{
+ switch (ucc_num) {
+ case 0: /* UCC1 */
+ *p_cmxucr = &(qe_immr->qmx.cmxucr1);
+ *reg_num = 1;
+ *shift = 16;
+ break;
+ case 2: /* UCC3 */
+ *p_cmxucr = &(qe_immr->qmx.cmxucr1);
+ *reg_num = 1;
+ *shift = 0;
+ break;
+ case 4: /* UCC5 */
+ *p_cmxucr = &(qe_immr->qmx.cmxucr2);
+ *reg_num = 2;
+ *shift = 16;
+ break;
+ case 6: /* UCC7 */
+ *p_cmxucr = &(qe_immr->qmx.cmxucr2);
+ *reg_num = 2;
+ *shift = 0;
+ break;
+ case 1: /* UCC2 */
+ *p_cmxucr = &(qe_immr->qmx.cmxucr3);
+ *reg_num = 3;
+ *shift = 16;
+ break;
+ case 3: /* UCC4 */
+ *p_cmxucr = &(qe_immr->qmx.cmxucr3);
+ *reg_num = 3;
+ *shift = 0;
+ break;
+ case 5: /* UCC6 */
+ *p_cmxucr = &(qe_immr->qmx.cmxucr4);
+ *reg_num = 4;
+ *shift = 16;
+ break;
+ case 7: /* UCC8 */
+ *p_cmxucr = &(qe_immr->qmx.cmxucr4);
+ *reg_num = 4;
+ *shift = 0;
+ break;
+ default:
+ break;
+ }
+}
+
+static int ucc_set_clk_src(int ucc_num, qe_clock_e clock, comm_dir_e mode)
+{
+ volatile u32 *p_cmxucr = NULL;
+ u8 reg_num = 0;
+ u8 shift = 0;
+ u32 clockBits;
+ u32 clockMask;
+ int source = -1;
+
+ /* check if the UCC number is in range. */
+ if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+ return -EINVAL;
+
+ if (! ((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) {
+ printf("%s: bad comm mode type passed\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ ucc_get_cmxucr_reg(ucc_num, &p_cmxucr, ®_num, &shift);
+
+ switch (reg_num) {
+ case 1:
+ switch (clock) {
+ case QE_BRG1: source = 1; break;
+ case QE_BRG2: source = 2; break;
+ case QE_BRG7: source = 3; break;
+ case QE_BRG8: source = 4; break;
+ case QE_CLK9: source = 5; break;
+ case QE_CLK10: source = 6; break;
+ case QE_CLK11: source = 7; break;
+ case QE_CLK12: source = 8; break;
+ case QE_CLK15: source = 9; break;
+ case QE_CLK16: source = 10; break;
+ default: source = -1; break;
+ }
+ break;
+ case 2:
+ switch (clock) {
+ case QE_BRG5: source = 1; break;
+ case QE_BRG6: source = 2; break;
+ case QE_BRG7: source = 3; break;
+ case QE_BRG8: source = 4; break;
+ case QE_CLK13: source = 5; break;
+ case QE_CLK14: source = 6; break;
+ case QE_CLK19: source = 7; break;
+ case QE_CLK20: source = 8; break;
+ case QE_CLK15: source = 9; break;
+ case QE_CLK16: source = 10; break;
+ default: source = -1; break;
+ }
+ break;
+ case 3:
+ switch (clock) {
+ case QE_BRG9: source = 1; break;
+ case QE_BRG10: source = 2; break;
+ case QE_BRG15: source = 3; break;
+ case QE_BRG16: source = 4; break;
+ case QE_CLK3: source = 5; break;
+ case QE_CLK4: source = 6; break;
+ case QE_CLK17: source = 7; break;
+ case QE_CLK18: source = 8; break;
+ case QE_CLK7: source = 9; break;
+ case QE_CLK8: source = 10; break;
+ case QE_CLK16: source = 11; break;
+ default: source = -1; break;
+ }
+ break;
+ case 4:
+ switch (clock) {
+ case QE_BRG13: source = 1; break;
+ case QE_BRG14: source = 2; break;
+ case QE_BRG15: source = 3; break;
+ case QE_BRG16: source = 4; break;
+ case QE_CLK5: source = 5; break;
+ case QE_CLK6: source = 6; break;
+ case QE_CLK21: source = 7; break;
+ case QE_CLK22: source = 8; break;
+ case QE_CLK7: source = 9; break;
+ case QE_CLK8: source = 10; break;
+ case QE_CLK16: source = 11; break;
+ default: source = -1; break;
+ }
+ break;
+ default:
+ source = -1;
+ break;
+ }
+
+ if (source == -1) {
+ printf("%s: Bad combination of clock and UCC\n", __FUNCTION__);
+ return -ENOENT;
+ }
+
+ clockBits = (u32) source;
+ clockMask = QE_CMXUCR_TX_CLK_SRC_MASK;
+ if (mode == COMM_DIR_RX) {
+ clockBits <<= 4; /* Rx field is 4 bits to left of Tx field */
+ clockMask <<= 4; /* Rx field is 4 bits to left of Tx field */
+ }
+ clockBits <<= shift;
+ clockMask <<= shift;
+
+ out_be32(p_cmxucr, (in_be32(p_cmxucr) & ~clockMask) | clockBits);
+
+ return 0;
+}
+
+static uint ucc_get_reg_baseaddr(int ucc_num)
+{
+ uint base = 0;
+
+ /* check if the UCC number is in range */
+ if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) {
+ printf("%s: the UCC num not in ranges\n", __FUNCTION__);
+ return 0;
+ }
+
+ switch (ucc_num) {
+ case 0: base = 0x00002000; break;
+ case 1: base = 0x00003000; break;
+ case 2: base = 0x00002200; break;
+ case 3: base = 0x00003200; break;
+ case 4: base = 0x00002400; break;
+ case 5: base = 0x00003400; break;
+ case 6: base = 0x00002600; break;
+ case 7: base = 0x00003600; break;
+ default: break;
+ }
+
+ base = (uint)qe_immr + base;
+ return base;
+}
+
+void ucc_fast_enable(ucc_fast_private_t *uccf, comm_dir_e mode)
+{
+ ucc_fast_t *uf_regs;
+ u32 gumr;
+
+ uf_regs = uccf->uf_regs;
+
+ /* Enable reception and/or transmission on this UCC. */
+ gumr = in_be32(&uf_regs->gumr);
+ if (mode & COMM_DIR_TX) {
+ gumr |= UCC_FAST_GUMR_ENT;
+ uccf->enabled_tx = 1;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr |= UCC_FAST_GUMR_ENR;
+ uccf->enabled_rx = 1;
+ }
+ out_be32(&uf_regs->gumr, gumr);
+}
+
+void ucc_fast_disable(ucc_fast_private_t *uccf, comm_dir_e mode)
+{
+ ucc_fast_t *uf_regs;
+ u32 gumr;
+
+ uf_regs = uccf->uf_regs;
+
+ /* Disable reception and/or transmission on this UCC. */
+ gumr = in_be32(&uf_regs->gumr);
+ if (mode & COMM_DIR_TX) {
+ gumr &= ~UCC_FAST_GUMR_ENT;
+ uccf->enabled_tx = 0;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr &= ~UCC_FAST_GUMR_ENR;
+ uccf->enabled_rx = 0;
+ }
+ out_be32(&uf_regs->gumr, gumr);
+}
+
+int ucc_fast_init(ucc_fast_info_t *uf_info, ucc_fast_private_t **uccf_ret)
+{
+ ucc_fast_private_t *uccf;
+ ucc_fast_t *uf_regs;
+
+ if (!uf_info)
+ return -EINVAL;
+
+ if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
+ printf("%s: Illagal UCC number!\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ uccf = (ucc_fast_private_t *)malloc(sizeof(ucc_fast_private_t));
+ if (!uccf) {
+ printf("%s: No memory for UCC fast data structure!\n",
+ __FUNCTION__);
+ return -ENOMEM;
+ }
+ memset(uccf, 0, sizeof(ucc_fast_private_t));
+
+ /* Save fast UCC structure */
+ uccf->uf_info = uf_info;
+ uccf->uf_regs = (ucc_fast_t *)ucc_get_reg_baseaddr(uf_info->ucc_num);
+
+ if (uccf->uf_regs == NULL) {
+ printf("%s: No memory map for UCC fast controller!\n",
+ __FUNCTION__);
+ return -ENOMEM;
+ }
+
+ uccf->enabled_tx = 0;
+ uccf->enabled_rx = 0;
+
+ uf_regs = uccf->uf_regs;
+ uccf->p_ucce = (u32 *) &(uf_regs->ucce);
+ uccf->p_uccm = (u32 *) &(uf_regs->uccm);
+
+ /* Init GUEMR register, UCC both Rx and Tx is Fast protocol */
+ out_8(&uf_regs->guemr, UCC_GUEMR_SET_RESERVED3 | UCC_GUEMR_MODE_FAST_RX
+ | UCC_GUEMR_MODE_FAST_TX);
+
+ /* Set GUMR, disable UCC both Rx and Tx, Ethernet protocol */
+ out_be32(&uf_regs->gumr, UCC_FAST_GUMR_ETH);
+
+ /* Set the Giga ethernet VFIFO stuff */
+ if (uf_info->eth_type == GIGA_ETH) {
+ /* Allocate memory for Tx Virtual Fifo */
+ uccf->ucc_fast_tx_virtual_fifo_base_offset =
+ qe_muram_alloc(UCC_GETH_UTFS_GIGA_INIT,
+ UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+
+ /* Allocate memory for Rx Virtual Fifo */
+ uccf->ucc_fast_rx_virtual_fifo_base_offset =
+ qe_muram_alloc(UCC_GETH_URFS_GIGA_INIT +
+ UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD,
+ UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+
+ /* utfb, urfb are offsets from MURAM base */
+ out_be32(&uf_regs->utfb,
+ uccf->ucc_fast_tx_virtual_fifo_base_offset);
+ out_be32(&uf_regs->urfb,
+ uccf->ucc_fast_rx_virtual_fifo_base_offset);
+
+ /* Set Virtual Fifo registers */
+ out_be16(&uf_regs->urfs, UCC_GETH_URFS_GIGA_INIT);
+ out_be16(&uf_regs->urfet, UCC_GETH_URFET_GIGA_INIT);
+ out_be16(&uf_regs->urfset, UCC_GETH_URFSET_GIGA_INIT);
+ out_be16(&uf_regs->utfs, UCC_GETH_UTFS_GIGA_INIT);
+ out_be16(&uf_regs->utfet, UCC_GETH_UTFET_GIGA_INIT);
+ out_be16(&uf_regs->utftt, UCC_GETH_UTFTT_GIGA_INIT);
+ }
+
+ /* Set the Fast ethernet VFIFO stuff */
+ if (uf_info->eth_type == FAST_ETH) {
+ /* Allocate memory for Tx Virtual Fifo */
+ uccf->ucc_fast_tx_virtual_fifo_base_offset =
+ qe_muram_alloc(UCC_GETH_UTFS_INIT,
+ UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+
+ /* Allocate memory for Rx Virtual Fifo */
+ uccf->ucc_fast_rx_virtual_fifo_base_offset =
+ qe_muram_alloc(UCC_GETH_URFS_INIT +
+ UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD,
+ UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+
+ /* utfb, urfb are offsets from MURAM base */
+ out_be32(&uf_regs->utfb,
+ uccf->ucc_fast_tx_virtual_fifo_base_offset);
+ out_be32(&uf_regs->urfb,
+ uccf->ucc_fast_rx_virtual_fifo_base_offset);
+
+ /* Set Virtual Fifo registers */
+ out_be16(&uf_regs->urfs, UCC_GETH_URFS_INIT);
+ out_be16(&uf_regs->urfet, UCC_GETH_URFET_INIT);
+ out_be16(&uf_regs->urfset, UCC_GETH_URFSET_INIT);
+ out_be16(&uf_regs->utfs, UCC_GETH_UTFS_INIT);
+ out_be16(&uf_regs->utfet, UCC_GETH_UTFET_INIT);
+ out_be16(&uf_regs->utftt, UCC_GETH_UTFTT_INIT);
+ }
+
+ /* Rx clock routing */
+ if (uf_info->rx_clock != QE_CLK_NONE) {
+ if (ucc_set_clk_src(uf_info->ucc_num,
+ uf_info->rx_clock, COMM_DIR_RX)) {
+ printf("%s: Illegal value for parameter 'RxClock'.\n",
+ __FUNCTION__);
+ return -EINVAL;
+ }
+ }
+
+ /* Tx clock routing */
+ if (uf_info->tx_clock != QE_CLK_NONE) {
+ if (ucc_set_clk_src(uf_info->ucc_num,
+ uf_info->tx_clock, COMM_DIR_TX)) {
+ printf("%s: Illegal value for parameter 'TxClock'.\n",
+ __FUNCTION__);
+ return -EINVAL;
+ }
+ }
+
+ /* Clear interrupt mask register to disable all of interrupts */
+ out_be32(&uf_regs->uccm, 0x0);
+
+ /* Writing '1' to clear all of envents */
+ out_be32(&uf_regs->ucce, 0xffffffff);
+
+ *uccf_ret = uccf;
+ return 0;
+}
+#endif /* CONFIG_QE */
diff --git a/drivers/qe/uccf.h b/drivers/qe/uccf.h
new file mode 100644
index 0000000..1ff9e1d
--- /dev/null
+++ b/drivers/qe/uccf.h
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ * based on source code of Shlomi Gridish
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __UCCF_H__
+#define __UCCF_H__
+
+#include "common.h"
+#include "qe.h"
+
+/* Fast or Giga ethernet
+*/
+typedef enum enet_type {
+ FAST_ETH,
+ GIGA_ETH,
+} enet_type_e;
+
+/* General UCC Extended Mode Register
+*/
+#define UCC_GUEMR_MODE_MASK_RX 0x02
+#define UCC_GUEMR_MODE_MASK_TX 0x01
+#define UCC_GUEMR_MODE_FAST_RX 0x02
+#define UCC_GUEMR_MODE_FAST_TX 0x01
+#define UCC_GUEMR_MODE_SLOW_RX 0x00
+#define UCC_GUEMR_MODE_SLOW_TX 0x00
+#define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 must be set 1 */
+
+/* General UCC FAST Mode Register
+*/
+#define UCC_FAST_GUMR_TCI 0x20000000
+#define UCC_FAST_GUMR_TRX 0x10000000
+#define UCC_FAST_GUMR_TTX 0x08000000
+#define UCC_FAST_GUMR_CDP 0x04000000
+#define UCC_FAST_GUMR_CTSP 0x02000000
+#define UCC_FAST_GUMR_CDS 0x01000000
+#define UCC_FAST_GUMR_CTSS 0x00800000
+#define UCC_FAST_GUMR_TXSY 0x00020000
+#define UCC_FAST_GUMR_RSYN 0x00010000
+#define UCC_FAST_GUMR_RTSM 0x00002000
+#define UCC_FAST_GUMR_REVD 0x00000400
+#define UCC_FAST_GUMR_ENR 0x00000020
+#define UCC_FAST_GUMR_ENT 0x00000010
+
+/* GUMR [MODE] bit maps
+*/
+#define UCC_FAST_GUMR_HDLC 0x00000000
+#define UCC_FAST_GUMR_QMC 0x00000002
+#define UCC_FAST_GUMR_UART 0x00000004
+#define UCC_FAST_GUMR_BISYNC 0x00000008
+#define UCC_FAST_GUMR_ATM 0x0000000a
+#define UCC_FAST_GUMR_ETH 0x0000000c
+
+/* Transmit On Demand (UTORD)
+*/
+#define UCC_SLOW_TOD 0x8000
+#define UCC_FAST_TOD 0x8000
+
+/* Fast Ethernet (10/100 Mbps)
+*/
+#define UCC_GETH_URFS_INIT 512 /* Rx virtual FIFO size */
+#define UCC_GETH_URFET_INIT 256 /* 1/2 urfs */
+#define UCC_GETH_URFSET_INIT 384 /* 3/4 urfs */
+#define UCC_GETH_UTFS_INIT 512 /* Tx virtual FIFO size */
+#define UCC_GETH_UTFET_INIT 256 /* 1/2 utfs */
+#define UCC_GETH_UTFTT_INIT 128
+
+/* Gigabit Ethernet (1000 Mbps)
+*/
+#define UCC_GETH_URFS_GIGA_INIT 4096/*2048*/ /* Rx virtual FIFO size */
+#define UCC_GETH_URFET_GIGA_INIT 2048/*1024*/ /* 1/2 urfs */
+#define UCC_GETH_URFSET_GIGA_INIT 3072/*1536*/ /* 3/4 urfs */
+#define UCC_GETH_UTFS_GIGA_INIT 8192/*2048*/ /* Tx virtual FIFO size */
+#define UCC_GETH_UTFET_GIGA_INIT 4096/*1024*/ /* 1/2 utfs */
+#define UCC_GETH_UTFTT_GIGA_INIT 0x400/*0x40*/ /* */
+
+/* UCC fast alignment
+*/
+#define UCC_FAST_RX_ALIGN 4
+#define UCC_FAST_MRBLR_ALIGNMENT 4
+#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT 8
+
+/* Sizes
+*/
+#define UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD 8
+
+/* UCC fast structure.
+*/
+typedef struct ucc_fast_info {
+ int ucc_num;
+ qe_clock_e rx_clock;
+ qe_clock_e tx_clock;
+ enet_type_e eth_type;
+} ucc_fast_info_t;
+
+typedef struct ucc_fast_private {
+ ucc_fast_info_t *uf_info;
+ ucc_fast_t *uf_regs; /* a pointer to memory map of UCC regs */
+ u32 *p_ucce; /* a pointer to the event register */
+ u32 *p_uccm; /* a pointer to the mask register */
+ int enabled_tx; /* whether UCC is enabled for Tx (ENT) */
+ int enabled_rx; /* whether UCC is enabled for Rx (ENR) */
+ u32 ucc_fast_tx_virtual_fifo_base_offset;
+ u32 ucc_fast_rx_virtual_fifo_base_offset;
+} ucc_fast_private_t;
+
+void ucc_fast_transmit_on_demand(ucc_fast_private_t *uccf);
+u32 ucc_fast_get_qe_cr_subblock(int ucc_num);
+void ucc_fast_enable(ucc_fast_private_t *uccf, comm_dir_e mode);
+void ucc_fast_disable(ucc_fast_private_t *uccf, comm_dir_e mode);
+int ucc_fast_init(ucc_fast_info_t *uf_info, ucc_fast_private_t **uccf_ret);
+
+#endif /* __UCCF_H__ */
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
new file mode 100644
index 0000000..f640c81
--- /dev/null
+++ b/drivers/qe/uec.c
@@ -0,0 +1,1266 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "common.h"
+#include "net.h"
+#include "malloc.h"
+#include "asm/errno.h"
+#include "asm/io.h"
+#include "asm/immap_qe.h"
+#include "qe.h"
+#include "uccf.h"
+#include "uec.h"
+#include "uec_phy.h"
+
+#if defined(CONFIG_QE)
+
+#ifdef CONFIG_UEC_ETH1
+static uec_info_t eth1_uec_info = {
+ .uf_info = {
+ .ucc_num = CFG_UEC1_UCC_NUM,
+ .rx_clock = CFG_UEC1_RX_CLK,
+ .tx_clock = CFG_UEC1_TX_CLK,
+ .eth_type = CFG_UEC1_ETH_TYPE,
+ },
+ .num_threads_tx = UEC_NUM_OF_THREADS_4,
+ .num_threads_rx = UEC_NUM_OF_THREADS_4,
+ .riscTx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+ .riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+ .tx_bd_ring_len = 16,
+ .rx_bd_ring_len = 16,
+ .phy_address = CFG_UEC1_PHY_ADDR,
+ .enet_interface = CFG_UEC1_INTERFACE_MODE,
+};
+#endif
+#ifdef CONFIG_UEC_ETH2
+static uec_info_t eth2_uec_info = {
+ .uf_info = {
+ .ucc_num = CFG_UEC2_UCC_NUM,
+ .rx_clock = CFG_UEC2_RX_CLK,
+ .tx_clock = CFG_UEC2_TX_CLK,
+ .eth_type = CFG_UEC2_ETH_TYPE,
+ },
+ .num_threads_tx = UEC_NUM_OF_THREADS_4,
+ .num_threads_rx = UEC_NUM_OF_THREADS_4,
+ .riscTx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+ .riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+ .tx_bd_ring_len = 16,
+ .rx_bd_ring_len = 16,
+ .phy_address = CFG_UEC2_PHY_ADDR,
+ .enet_interface = CFG_UEC2_INTERFACE_MODE,
+};
+#endif
+
+static int uec_mac_enable(uec_private_t *uec, comm_dir_e mode)
+{
+ uec_t *uec_regs;
+ u32 maccfg1;
+
+ if (!uec) {
+ printf("%s: uec not initial\n", __FUNCTION__);
+ return -EINVAL;
+ }
+ uec_regs = uec->uec_regs;
+
+ maccfg1 = in_be32(&uec_regs->maccfg1);
+
+ if (mode & COMM_DIR_TX) {
+ maccfg1 |= MACCFG1_ENABLE_TX;
+ out_be32(&uec_regs->maccfg1, maccfg1);
+ uec->mac_tx_enabled = 1;
+ }
+
+ if (mode & COMM_DIR_RX) {
+ maccfg1 |= MACCFG1_ENABLE_RX;
+ out_be32(&uec_regs->maccfg1, maccfg1);
+ uec->mac_rx_enabled = 1;
+ }
+
+ return 0;
+}
+
+static int uec_mac_disable(uec_private_t *uec, comm_dir_e mode)
+{
+ uec_t *uec_regs;
+ u32 maccfg1;
+
+ if (!uec) {
+ printf("%s: uec not initial\n", __FUNCTION__);
+ return -EINVAL;
+ }
+ uec_regs = uec->uec_regs;
+
+ maccfg1 = in_be32(&uec_regs->maccfg1);
+
+ if (mode & COMM_DIR_TX) {
+ maccfg1 &= ~MACCFG1_ENABLE_TX;
+ out_be32(&uec_regs->maccfg1, maccfg1);
+ uec->mac_tx_enabled = 0;
+ }
+
+ if (mode & COMM_DIR_RX) {
+ maccfg1 &= ~MACCFG1_ENABLE_RX;
+ out_be32(&uec_regs->maccfg1, maccfg1);
+ uec->mac_rx_enabled = 0;
+ }
+
+ return 0;
+}
+
+static int uec_graceful_stop_tx(uec_private_t *uec)
+{
+ ucc_fast_t *uf_regs;
+ u32 cecr_subblock;
+ u32 ucce;
+
+ if (!uec || !uec->uccf) {
+ printf("%s: No handle passed.\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ uf_regs = uec->uccf->uf_regs;
+
+ /* Clear the grace stop event */
+ out_be32(&uf_regs->ucce, UCCE_GRA);
+
+ /* Issue host command */
+ cecr_subblock =
+ ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
+ qe_issue_cmd(QE_GRACEFUL_STOP_TX, cecr_subblock,
+ (u8)QE_CR_PROTOCOL_ETHERNET, 0);
+
+ /* Wait for command to complete */
+ do {
+ ucce = in_be32(&uf_regs->ucce);
+ } while (! (ucce & UCCE_GRA));
+
+ uec->grace_stopped_tx = 1;
+
+ return 0;
+}
+
+static int uec_graceful_stop_rx(uec_private_t *uec)
+{
+ u32 cecr_subblock;
+ u8 ack;
+
+ if (!uec) {
+ printf("%s: No handle passed.\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ if (!uec->p_rx_glbl_pram) {
+ printf("%s: No init rx global parameter\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ /* Clear acknowledge bit */
+ ack = uec->p_rx_glbl_pram->rxgstpack;
+ ack &= ~GRACEFUL_STOP_ACKNOWLEDGE_RX;
+ uec->p_rx_glbl_pram->rxgstpack = ack;
+
+ /* Keep issuing cmd and checking ack bit until it is asserted */
+ do {
+ /* Issue host command */
+ cecr_subblock =
+ ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
+ qe_issue_cmd(QE_GRACEFUL_STOP_RX, cecr_subblock,
+ (u8)QE_CR_PROTOCOL_ETHERNET, 0);
+ ack = uec->p_rx_glbl_pram->rxgstpack;
+ } while (! (ack & GRACEFUL_STOP_ACKNOWLEDGE_RX ));
+
+ uec->grace_stopped_rx = 1;
+
+ return 0;
+}
+
+static int uec_restart_tx(uec_private_t *uec)
+{
+ u32 cecr_subblock;
+
+ if (!uec || !uec->uec_info) {
+ printf("%s: No handle passed.\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ cecr_subblock =
+ ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
+ qe_issue_cmd(QE_RESTART_TX, cecr_subblock,
+ (u8)QE_CR_PROTOCOL_ETHERNET, 0);
+
+ uec->grace_stopped_tx = 0;
+
+ return 0;
+}
+
+static int uec_restart_rx(uec_private_t *uec)
+{
+ u32 cecr_subblock;
+
+ if (!uec || !uec->uec_info) {
+ printf("%s: No handle passed.\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ cecr_subblock =
+ ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
+ qe_issue_cmd(QE_RESTART_RX, cecr_subblock,
+ (u8)QE_CR_PROTOCOL_ETHERNET, 0);
+
+ uec->grace_stopped_rx = 0;
+
+ return 0;
+}
+
+static int uec_open(uec_private_t *uec, comm_dir_e mode)
+{
+ ucc_fast_private_t *uccf;
+
+ if (!uec || !uec->uccf) {
+ printf("%s: No handle passed.\n", __FUNCTION__);
+ return -EINVAL;
+ }
+ uccf = uec->uccf;
+
+ /* check if the UCC number is in range. */
+ if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) {
+ printf("%s: ucc_num out of range.\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ /* Enable MAC */
+ uec_mac_enable(uec, mode);
+
+ /* Enable UCC fast */
+ ucc_fast_enable(uccf, mode);
+
+ /* RISC microcode start */
+ if ((mode & COMM_DIR_TX) && uec->grace_stopped_tx) {
+ uec_restart_tx(uec);
+ }
+ if ((mode & COMM_DIR_RX) && uec->grace_stopped_rx) {
+ uec_restart_rx(uec);
+ }
+
+ return 0;
+}
+
+static int uec_stop(uec_private_t *uec, comm_dir_e mode)
+{
+ ucc_fast_private_t *uccf;
+
+ if (!uec || !uec->uccf) {
+ printf("%s: No handle passed.\n", __FUNCTION__);
+ return -EINVAL;
+ }
+ uccf = uec->uccf;
+
+ /* check if the UCC number is in range. */
+ if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) {
+ printf("%s: ucc_num out of range.\n", __FUNCTION__);
+ return -EINVAL;
+ }
+ /* Stop any transmissions */
+ if ((mode & COMM_DIR_TX) && !uec->grace_stopped_tx) {
+ uec_graceful_stop_tx(uec);
+ }
+ /* Stop any receptions */
+ if ((mode & COMM_DIR_RX) && !uec->grace_stopped_rx) {
+ uec_graceful_stop_rx(uec);
+ }
+
+ /* Disable the UCC fast */
+ ucc_fast_disable(uec->uccf, mode);
+
+ /* Disable the MAC */
+ uec_mac_disable(uec, mode);
+
+ return 0;
+}
+
+static int uec_set_mac_duplex(uec_private_t *uec, int duplex)
+{
+ uec_t *uec_regs;
+ u32 maccfg2;
+
+ if (!uec) {
+ printf("%s: uec not initial\n", __FUNCTION__);
+ return -EINVAL;
+ }
+ uec_regs = uec->uec_regs;
+
+ if (duplex == DUPLEX_HALF) {
+ maccfg2 = in_be32(&uec_regs->maccfg2);
+ maccfg2 &= ~MACCFG2_FDX;
+ out_be32(&uec_regs->maccfg2, maccfg2);
+ }
+
+ if (duplex == DUPLEX_FULL) {
+ maccfg2 = in_be32(&uec_regs->maccfg2);
+ maccfg2 |= MACCFG2_FDX;
+ out_be32(&uec_regs->maccfg2, maccfg2);
+ }
+
+ return 0;
+}
+
+static int uec_set_mac_if_mode(uec_private_t *uec, enet_interface_e if_mode)
+{
+ enet_interface_e enet_if_mode;
+ uec_info_t *uec_info;
+ uec_t *uec_regs;
+ u32 upsmr;
+ u32 maccfg2;
+
+ if (!uec) {
+ printf("%s: uec not initial\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ uec_info = uec->uec_info;
+ uec_regs = uec->uec_regs;
+ enet_if_mode = if_mode;
+
+ maccfg2 = in_be32(&uec_regs->maccfg2);
+ maccfg2 &= ~MACCFG2_INTERFACE_MODE_MASK;
+
+ upsmr = in_be32(&uec->uccf->uf_regs->upsmr);
+ upsmr &= ~(UPSMR_RPM | UPSMR_TBIM | UPSMR_R10M | UPSMR_RMM);
+
+ switch (enet_if_mode) {
+ case ENET_100_MII:
+ case ENET_10_MII:
+ maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
+ break;
+ case ENET_1000_GMII:
+ maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
+ break;
+ case ENET_1000_TBI:
+ maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
+ upsmr |= UPSMR_TBIM;
+ break;
+ case ENET_1000_RTBI:
+ maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
+ upsmr |= (UPSMR_RPM | UPSMR_TBIM);
+ break;
+ case ENET_1000_RGMII:
+ maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
+ upsmr |= UPSMR_RPM;
+ break;
+ case ENET_100_RGMII:
+ maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
+ upsmr |= UPSMR_RPM;
+ break;
+ case ENET_10_RGMII:
+ maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
+ upsmr |= (UPSMR_RPM | UPSMR_R10M);
+ break;
+ case ENET_100_RMII:
+ maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
+ upsmr |= UPSMR_RMM;
+ break;
+ case ENET_10_RMII:
+ maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
+ upsmr |= (UPSMR_R10M | UPSMR_RMM);
+ break;
+ default:
+ return -EINVAL;
+ break;
+ }
+ out_be32(&uec_regs->maccfg2, maccfg2);
+ out_be32(&uec->uccf->uf_regs->upsmr, upsmr);
+
+ return 0;
+}
+
+static int init_mii_management_configuration(uec_t *uec_regs)
+{
+ uint timeout = 0x1000;
+ u32 miimcfg = 0;
+
+ miimcfg = in_be32(&uec_regs->miimcfg);
+ miimcfg |= MIIMCFG_MNGMNT_CLC_DIV_INIT_VALUE;
+ out_be32(&uec_regs->miimcfg, miimcfg);
+
+ /* Wait until the bus is free */
+ while ((in_be32(&uec_regs->miimcfg) & MIIMIND_BUSY) && timeout--);
+ if (timeout <= 0) {
+ printf("%s: The MII Bus is stuck!", __FUNCTION__);
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static int init_phy(struct eth_device *dev)
+{
+ uec_private_t *uec;
+ uec_t *uec_regs;
+ struct uec_mii_info *mii_info;
+ struct phy_info *curphy;
+ int err;
+
+ uec = (uec_private_t *)dev->priv;
+ uec_regs = uec->uec_regs;
+
+ uec->oldlink = 0;
+ uec->oldspeed = 0;
+ uec->oldduplex = -1;
+
+ mii_info = malloc(sizeof(*mii_info));
+ if (!mii_info) {
+ printf("%s: Could not allocate mii_info", dev->name);
+ return -ENOMEM;
+ }
+ memset(mii_info, 0, sizeof(*mii_info));
+
+ mii_info->speed = SPEED_1000;
+ mii_info->duplex = DUPLEX_FULL;
+ mii_info->pause = 0;
+ mii_info->link = 1;
+
+ mii_info->advertising = (ADVERTISED_10baseT_Half |
+ ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half |
+ ADVERTISED_100baseT_Full |
+ ADVERTISED_1000baseT_Full);
+ mii_info->autoneg = 1;
+ mii_info->mii_id = uec->uec_info->phy_address;
+ mii_info->dev = dev;
+
+ mii_info->mdio_read = &read_phy_reg;
+ mii_info->mdio_write = &write_phy_reg;
+
+ uec->mii_info = mii_info;
+
+ if (init_mii_management_configuration(uec_regs)) {
+ printf("%s: The MII Bus is stuck!", dev->name);
+ err = -1;
+ goto bus_fail;
+ }
+
+ /* get info for this PHY */
+ curphy = get_phy_info(uec->mii_info);
+ if (!curphy) {
+ printf("%s: No PHY found", dev->name);
+ err = -1;
+ goto no_phy;
+ }
+
+ mii_info->phyinfo = curphy;
+
+ /* Run the commands which initialize the PHY */
+ if (curphy->init) {
+ err = curphy->init(uec->mii_info);
+ if (err)
+ goto phy_init_fail;
+ }
+
+ return 0;
+
+phy_init_fail:
+no_phy:
+bus_fail:
+ free(mii_info);
+ return err;
+}
+
+static void adjust_link(struct eth_device *dev)
+{
+ uec_private_t *uec = (uec_private_t *)dev->priv;
+ uec_t *uec_regs;
+ struct uec_mii_info *mii_info = uec->mii_info;
+
+ extern void change_phy_interface_mode(struct eth_device *dev,
+ enet_interface_e mode);
+ uec_regs = uec->uec_regs;
+
+ if (mii_info->link) {
+ /* Now we make sure that we can be in full duplex mode.
+ * If not, we operate in half-duplex mode. */
+ if (mii_info->duplex != uec->oldduplex) {
+ if (!(mii_info->duplex)) {
+ uec_set_mac_duplex(uec, DUPLEX_HALF);
+ printf("%s: Half Duplex\n", dev->name);
+ } else {
+ uec_set_mac_duplex(uec, DUPLEX_FULL);
+ printf("%s: Full Duplex\n", dev->name);
+ }
+ uec->oldduplex = mii_info->duplex;
+ }
+
+ if (mii_info->speed != uec->oldspeed) {
+ switch (mii_info->speed) {
+ case 1000:
+ break;
+ case 100:
+ printf ("switching to rgmii 100\n");
+ /* change phy to rgmii 100 */
+ change_phy_interface_mode(dev,
+ ENET_100_RGMII);
+ /* change the MAC interface mode */
+ uec_set_mac_if_mode(uec,ENET_100_RGMII);
+ break;
+ case 10:
+ printf ("switching to rgmii 10\n");
+ /* change phy to rgmii 10 */
+ change_phy_interface_mode(dev,
+ ENET_10_RGMII);
+ /* change the MAC interface mode */
+ uec_set_mac_if_mode(uec,ENET_10_RGMII);
+ break;
+ default:
+ printf("%s: Ack,Speed(%d)is illegal\n",
+ dev->name, mii_info->speed);
+ break;
+ }
+
+ printf("%s: Speed %dBT\n", dev->name, mii_info->speed);
+ uec->oldspeed = mii_info->speed;
+ }
+
+ if (!uec->oldlink) {
+ printf("%s: Link is up\n", dev->name);
+ uec->oldlink = 1;
+ }
+
+ } else { /* if (mii_info->link) */
+ if (uec->oldlink) {
+ printf("%s: Link is down\n", dev->name);
+ uec->oldlink = 0;
+ uec->oldspeed = 0;
+ uec->oldduplex = -1;
+ }
+ }
+}
+
+static void phy_change(struct eth_device *dev)
+{
+ uec_private_t *uec = (uec_private_t *)dev->priv;
+ uec_t *uec_regs;
+ int result = 0;
+
+ uec_regs = uec->uec_regs;
+
+ /* Delay 5s to give the PHY a chance to change the register state */
+ udelay(5000000);
+
+ /* Update the link, speed, duplex */
+ result = uec->mii_info->phyinfo->read_status(uec->mii_info);
+
+ /* Adjust the interface according to speed */
+ if ((0 == result) || (uec->mii_info->link == 0)) {
+ adjust_link(dev);
+ }
+}
+
+static int uec_set_mac_address(uec_private_t *uec, u8 *mac_addr)
+{
+ uec_t *uec_regs;
+ u32 mac_addr1;
+ u32 mac_addr2;
+
+ if (!uec) {
+ printf("%s: uec not initial\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ uec_regs = uec->uec_regs;
+
+ /* if a station address of 0x12345678ABCD, perform a write to
+ MACSTNADDR1 of 0xCDAB7856,
+ MACSTNADDR2 of 0x34120000 */
+
+ mac_addr1 = (mac_addr[5] << 24) | (mac_addr[4] << 16) | \
+ (mac_addr[3] << 8) | (mac_addr[2]);
+ out_be32(&uec_regs->macstnaddr1, mac_addr1);
+
+ mac_addr2 = ((mac_addr[1] << 24) | (mac_addr[0] << 16)) & 0xffff0000;
+ out_be32(&uec_regs->macstnaddr2, mac_addr2);
+
+ return 0;
+}
+
+static int uec_convert_threads_num(uec_num_of_threads_e threads_num,
+ int *threads_num_ret)
+{
+ int num_threads_numerica;
+
+ switch (threads_num) {
+ case UEC_NUM_OF_THREADS_1:
+ num_threads_numerica = 1;
+ break;
+ case UEC_NUM_OF_THREADS_2:
+ num_threads_numerica = 2;
+ break;
+ case UEC_NUM_OF_THREADS_4:
+ num_threads_numerica = 4;
+ break;
+ case UEC_NUM_OF_THREADS_6:
+ num_threads_numerica = 6;
+ break;
+ case UEC_NUM_OF_THREADS_8:
+ num_threads_numerica = 8;
+ break;
+ default:
+ printf("%s: Bad number of threads value.",
+ __FUNCTION__);
+ return -EINVAL;
+ }
+
+ *threads_num_ret = num_threads_numerica;
+
+ return 0;
+}
+
+static void uec_init_tx_parameter(uec_private_t *uec, int num_threads_tx)
+{
+ uec_info_t *uec_info;
+ u32 end_bd;
+ u8 bmrx = 0;
+ int i;
+
+ uec_info = uec->uec_info;
+
+ /* Alloc global Tx parameter RAM page */
+ uec->tx_glbl_pram_offset = qe_muram_alloc(
+ sizeof(uec_tx_global_pram_t),
+ UEC_TX_GLOBAL_PRAM_ALIGNMENT);
+ uec->p_tx_glbl_pram = (uec_tx_global_pram_t *)
+ qe_muram_addr(uec->tx_glbl_pram_offset);
+
+ /* Zero the global Tx prameter RAM */
+ memset(uec->p_tx_glbl_pram, 0, sizeof(uec_tx_global_pram_t));
+
+ /* Init global Tx parameter RAM */
+
+ /* TEMODER, RMON statistics disable, one Tx queue */
+ out_be16(&uec->p_tx_glbl_pram->temoder, TEMODER_INIT_VALUE);
+
+ /* SQPTR */
+ uec->send_q_mem_reg_offset = qe_muram_alloc(
+ sizeof(uec_send_queue_qd_t),
+ UEC_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT);
+ uec->p_send_q_mem_reg = (uec_send_queue_mem_region_t *)
+ qe_muram_addr(uec->send_q_mem_reg_offset);
+ out_be32(&uec->p_tx_glbl_pram->sqptr, uec->send_q_mem_reg_offset);
+
+ /* Setup the table with TxBDs ring */
+ end_bd = (u32)uec->p_tx_bd_ring + (uec_info->tx_bd_ring_len - 1)
+ * SIZEOFBD;
+ out_be32(&uec->p_send_q_mem_reg->sqqd[0].bd_ring_base,
+ (u32)(uec->p_tx_bd_ring));
+ out_be32(&uec->p_send_q_mem_reg->sqqd[0].last_bd_completed_address,
+ end_bd);
+
+ /* Scheduler Base Pointer, we have only one Tx queue, no need it */
+ out_be32(&uec->p_tx_glbl_pram->schedulerbasepointer, 0);
+
+ /* TxRMON Base Pointer, TxRMON disable, we don't need it */
+ out_be32(&uec->p_tx_glbl_pram->txrmonbaseptr, 0);
+
+ /* TSTATE, global snooping, big endian, the CSB bus selected */
+ bmrx = BMR_INIT_VALUE;
+ out_be32(&uec->p_tx_glbl_pram->tstate, ((u32)(bmrx) << BMR_SHIFT));
+
+ /* IPH_Offset */
+ for (i = 0; i < MAX_IPH_OFFSET_ENTRY; i++) {
+ out_8(&uec->p_tx_glbl_pram->iphoffset[i], 0);
+ }
+
+ /* VTAG table */
+ for (i = 0; i < UEC_TX_VTAG_TABLE_ENTRY_MAX; i++) {
+ out_be32(&uec->p_tx_glbl_pram->vtagtable[i], 0);
+ }
+
+ /* TQPTR */
+ uec->thread_dat_tx_offset = qe_muram_alloc(
+ num_threads_tx * sizeof(uec_thread_data_tx_t) +
+ 32 *(num_threads_tx == 1), UEC_THREAD_DATA_ALIGNMENT);
+
+ uec->p_thread_data_tx = (uec_thread_data_tx_t *)
+ qe_muram_addr(uec->thread_dat_tx_offset);
+ out_be32(&uec->p_tx_glbl_pram->tqptr, uec->thread_dat_tx_offset);
+}
+
+static void uec_init_rx_parameter(uec_private_t *uec, int num_threads_rx)
+{
+ u8 bmrx = 0;
+ int i;
+ uec_82xx_address_filtering_pram_t *p_af_pram;
+
+ /* Allocate global Rx parameter RAM page */
+ uec->rx_glbl_pram_offset = qe_muram_alloc(
+ sizeof(uec_rx_global_pram_t), UEC_RX_GLOBAL_PRAM_ALIGNMENT);
+ uec->p_rx_glbl_pram = (uec_rx_global_pram_t *)
+ qe_muram_addr(uec->rx_glbl_pram_offset);
+
+ /* Zero Global Rx parameter RAM */
+ memset(uec->p_rx_glbl_pram, 0, sizeof(uec_rx_global_pram_t));
+
+ /* Init global Rx parameter RAM */
+ /* REMODER, Extended feature mode disable, VLAN disable,
+ LossLess flow control disable, Receive firmware statisic disable,
+ Extended address parsing mode disable, One Rx queues,
+ Dynamic maximum/minimum frame length disable, IP checksum check
+ disable, IP address alignment disable
+ */
+ out_be32(&uec->p_rx_glbl_pram->remoder, REMODER_INIT_VALUE);
+
+ /* RQPTR */
+ uec->thread_dat_rx_offset = qe_muram_alloc(
+ num_threads_rx * sizeof(uec_thread_data_rx_t),
+ UEC_THREAD_DATA_ALIGNMENT);
+ uec->p_thread_data_rx = (uec_thread_data_rx_t *)
+ qe_muram_addr(uec->thread_dat_rx_offset);
+ out_be32(&uec->p_rx_glbl_pram->rqptr, uec->thread_dat_rx_offset);
+
+ /* Type_or_Len */
+ out_be16(&uec->p_rx_glbl_pram->typeorlen, 3072);
+
+ /* RxRMON base pointer, we don't need it */
+ out_be32(&uec->p_rx_glbl_pram->rxrmonbaseptr, 0);
+
+ /* IntCoalescingPTR, we don't need it, no interrupt */
+ out_be32(&uec->p_rx_glbl_pram->intcoalescingptr, 0);
+
+ /* RSTATE, global snooping, big endian, the CSB bus selected */
+ bmrx = BMR_INIT_VALUE;
+ out_8(&uec->p_rx_glbl_pram->rstate, bmrx);
+
+ /* MRBLR */
+ out_be16(&uec->p_rx_glbl_pram->mrblr, MAX_RXBUF_LEN);
+
+ /* RBDQPTR */
+ uec->rx_bd_qs_tbl_offset = qe_muram_alloc(
+ sizeof(uec_rx_bd_queues_entry_t) + \
+ sizeof(uec_rx_prefetched_bds_t),
+ UEC_RX_BD_QUEUES_ALIGNMENT);
+ uec->p_rx_bd_qs_tbl = (uec_rx_bd_queues_entry_t *)
+ qe_muram_addr(uec->rx_bd_qs_tbl_offset);
+
+ /* Zero it */
+ memset(uec->p_rx_bd_qs_tbl, 0, sizeof(uec_rx_bd_queues_entry_t) + \
+ sizeof(uec_rx_prefetched_bds_t));
+ out_be32(&uec->p_rx_glbl_pram->rbdqptr, uec->rx_bd_qs_tbl_offset);
+ out_be32(&uec->p_rx_bd_qs_tbl->externalbdbaseptr,
+ (u32)uec->p_rx_bd_ring);
+
+ /* MFLR */
+ out_be16(&uec->p_rx_glbl_pram->mflr, MAX_FRAME_LEN);
+ /* MINFLR */
+ out_be16(&uec->p_rx_glbl_pram->minflr, MIN_FRAME_LEN);
+ /* MAXD1 */
+ out_be16(&uec->p_rx_glbl_pram->maxd1, MAX_DMA1_LEN);
+ /* MAXD2 */
+ out_be16(&uec->p_rx_glbl_pram->maxd2, MAX_DMA2_LEN);
+ /* ECAM_PTR */
+ out_be32(&uec->p_rx_glbl_pram->ecamptr, 0);
+ /* L2QT */
+ out_be32(&uec->p_rx_glbl_pram->l2qt, 0);
+ /* L3QT */
+ for (i = 0; i < 8; i++) {
+ out_be32(&uec->p_rx_glbl_pram->l3qt[i], 0);
+ }
+
+ /* VLAN_TYPE */
+ out_be16(&uec->p_rx_glbl_pram->vlantype, 0x8100);
+ /* TCI */
+ out_be16(&uec->p_rx_glbl_pram->vlantci, 0);
+
+ /* Clear PQ2 style address filtering hash table */
+ p_af_pram = (uec_82xx_address_filtering_pram_t *) \
+ uec->p_rx_glbl_pram->addressfiltering;
+
+ p_af_pram->iaddr_h = 0;
+ p_af_pram->iaddr_l = 0;
+ p_af_pram->gaddr_h = 0;
+ p_af_pram->gaddr_l = 0;
+}
+
+static int uec_issue_init_enet_rxtx_cmd(uec_private_t *uec,
+ int thread_tx, int thread_rx)
+{
+ uec_init_cmd_pram_t *p_init_enet_param;
+ u32 init_enet_param_offset;
+ uec_info_t *uec_info;
+ int i;
+ int snum;
+ u32 init_enet_offset;
+ u32 entry_val;
+ u32 command;
+ u32 cecr_subblock;
+
+ uec_info = uec->uec_info;
+
+ /* Allocate init enet command parameter */
+ uec->init_enet_param_offset = qe_muram_alloc(
+ sizeof(uec_init_cmd_pram_t), 4);
+ init_enet_param_offset = uec->init_enet_param_offset;
+ uec->p_init_enet_param = (uec_init_cmd_pram_t *)
+ qe_muram_addr(uec->init_enet_param_offset);
+
+ /* Zero init enet command struct */
+ memset((void *)uec->p_init_enet_param, 0, sizeof(uec_init_cmd_pram_t));
+
+ /* Init the command struct */
+ p_init_enet_param = uec->p_init_enet_param;
+ p_init_enet_param->resinit0 = ENET_INIT_PARAM_MAGIC_RES_INIT0;
+ p_init_enet_param->resinit1 = ENET_INIT_PARAM_MAGIC_RES_INIT1;
+ p_init_enet_param->resinit2 = ENET_INIT_PARAM_MAGIC_RES_INIT2;
+ p_init_enet_param->resinit3 = ENET_INIT_PARAM_MAGIC_RES_INIT3;
+ p_init_enet_param->resinit4 = ENET_INIT_PARAM_MAGIC_RES_INIT4;
+ p_init_enet_param->largestexternallookupkeysize = 0;
+
+ p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_rx)
+ << ENET_INIT_PARAM_RGF_SHIFT;
+ p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_tx)
+ << ENET_INIT_PARAM_TGF_SHIFT;
+
+ /* Init Rx global parameter pointer */
+ p_init_enet_param->rgftgfrxglobal |= uec->rx_glbl_pram_offset |
+ (u32)uec_info->riscRx;
+
+ /* Init Rx threads */
+ for (i = 0; i < (thread_rx + 1); i++) {
+ if ((snum = qe_get_snum()) < 0) {
+ printf("%s can not get snum\n", __FUNCTION__);
+ return -ENOMEM;
+ }
+
+ if (i==0) {
+ init_enet_offset = 0;
+ } else {
+ init_enet_offset = qe_muram_alloc(
+ sizeof(uec_thread_rx_pram_t),
+ UEC_THREAD_RX_PRAM_ALIGNMENT);
+ }
+
+ entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) |
+ init_enet_offset | (u32)uec_info->riscRx;
+ p_init_enet_param->rxthread[i] = entry_val;
+ }
+
+ /* Init Tx global parameter pointer */
+ p_init_enet_param->txglobal = uec->tx_glbl_pram_offset |
+ (u32)uec_info->riscTx;
+
+ /* Init Tx threads */
+ for (i = 0; i < thread_tx; i++) {
+ if ((snum = qe_get_snum()) < 0) {
+ printf("%s can not get snum\n", __FUNCTION__);
+ return -ENOMEM;
+ }
+
+ init_enet_offset = qe_muram_alloc(sizeof(uec_thread_tx_pram_t),
+ UEC_THREAD_TX_PRAM_ALIGNMENT);
+
+ entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) |
+ init_enet_offset | (u32)uec_info->riscTx;
+ p_init_enet_param->txthread[i] = entry_val;
+ }
+
+ __asm__ __volatile__("sync");
+
+ /* Issue QE command */
+ command = QE_INIT_TX_RX;
+ cecr_subblock = ucc_fast_get_qe_cr_subblock(
+ uec->uec_info->uf_info.ucc_num);
+ qe_issue_cmd(command, cecr_subblock, (u8) QE_CR_PROTOCOL_ETHERNET,
+ init_enet_param_offset);
+
+ return 0;
+}
+
+static int uec_startup(uec_private_t *uec)
+{
+ uec_info_t *uec_info;
+ ucc_fast_info_t *uf_info;
+ ucc_fast_private_t *uccf;
+ ucc_fast_t *uf_regs;
+ uec_t *uec_regs;
+ int num_threads_tx;
+ int num_threads_rx;
+ u32 utbipar;
+ enet_interface_e enet_interface;
+ u32 length;
+ u32 align;
+ qe_bd_t *bd;
+ u8 *buf;
+ int i;
+
+ if (!uec || !uec->uec_info) {
+ printf("%s: uec or uec_info not initial\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ uec_info = uec->uec_info;
+ uf_info = &(uec_info->uf_info);
+
+ /* Check if Rx BD ring len is illegal */
+ if ((uec_info->rx_bd_ring_len < UEC_RX_BD_RING_SIZE_MIN) || \
+ (uec_info->rx_bd_ring_len % UEC_RX_BD_RING_SIZE_ALIGNMENT)) {
+ printf("%s: Rx BD ring len must be multiple of 4, and > 8.\n",
+ __FUNCTION__);
+ return -EINVAL;
+ }
+
+ /* Check if Tx BD ring len is illegal */
+ if (uec_info->tx_bd_ring_len < UEC_TX_BD_RING_SIZE_MIN) {
+ printf("%s: Tx BD ring length must not be smaller than 2.\n",
+ __FUNCTION__);
+ return -EINVAL;
+ }
+
+ /* Check if MRBLR is illegal */
+ if ((MAX_RXBUF_LEN == 0) || (MAX_RXBUF_LEN % UEC_MRBLR_ALIGNMENT)) {
+ printf("%s: max rx buffer length must be mutliple of 128.\n",
+ __FUNCTION__);
+ return -EINVAL;
+ }
+
+ /* Both Rx and Tx are stopped */
+ uec->grace_stopped_rx = 1;
+ uec->grace_stopped_tx = 1;
+
+ /* Init UCC fast */
+ if (ucc_fast_init(uf_info, &uccf)) {
+ printf("%s: failed to init ucc fast\n", __FUNCTION__);
+ return -ENOMEM;
+ }
+
+ /* Save uccf */
+ uec->uccf = uccf;
+
+ /* Convert the Tx threads number */
+ if (uec_convert_threads_num(uec_info->num_threads_tx,
+ &num_threads_tx)) {
+ return -EINVAL;
+ }
+
+ /* Convert the Rx threads number */
+ if (uec_convert_threads_num(uec_info->num_threads_rx,
+ &num_threads_rx)) {
+ return -EINVAL;
+ }
+
+ uf_regs = uccf->uf_regs;
+
+ /* UEC register is following UCC fast registers */
+ uec_regs = (uec_t *)(&uf_regs->ucc_eth);
+
+ /* Save the UEC register pointer to UEC private struct */
+ uec->uec_regs = uec_regs;
+
+ /* Init UPSMR, enable hardware statistics (UCC) */
+ out_be32(&uec->uccf->uf_regs->upsmr, UPSMR_INIT_VALUE);
+
+ /* Init MACCFG1, flow control disable, disable Tx and Rx */
+ out_be32(&uec_regs->maccfg1, MACCFG1_INIT_VALUE);
+
+ /* Init MACCFG2, length check, MAC PAD and CRC enable */
+ out_be32(&uec_regs->maccfg2, MACCFG2_INIT_VALUE);
+
+ /* Setup MAC interface mode */
+ uec_set_mac_if_mode(uec, uec_info->enet_interface);
+
+ /* Setup MII master clock source */
+ qe_set_mii_clk_src(uec_info->uf_info.ucc_num);
+
+ /* Setup UTBIPAR */
+ utbipar = in_be32(&uec_regs->utbipar);
+ utbipar &= ~UTBIPAR_PHY_ADDRESS_MASK;
+ enet_interface = uec->uec_info->enet_interface;
+ if (enet_interface == ENET_1000_TBI ||
+ enet_interface == ENET_1000_RTBI) {
+ utbipar |= (uec_info->phy_address + uec_info->uf_info.ucc_num)
+ << UTBIPAR_PHY_ADDRESS_SHIFT;
+ } else {
+ utbipar |= (0x10 + uec_info->uf_info.ucc_num)
+ << UTBIPAR_PHY_ADDRESS_SHIFT;
+ }
+
+ out_be32(&uec_regs->utbipar, utbipar);
+
+ /* Allocate Tx BDs */
+ length = ((uec_info->tx_bd_ring_len * SIZEOFBD) /
+ UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) *
+ UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT;
+ if ((uec_info->tx_bd_ring_len * SIZEOFBD) %
+ UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) {
+ length += UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT;
+ }
+
+ align = UEC_TX_BD_RING_ALIGNMENT;
+ uec->tx_bd_ring_offset = (u32)malloc((u32)(length + align));
+ if (uec->tx_bd_ring_offset != 0) {
+ uec->p_tx_bd_ring = (u8 *)((uec->tx_bd_ring_offset + align)
+ & ~(align - 1));
+ }
+
+ /* Zero all of Tx BDs */
+ memset((void *)(uec->tx_bd_ring_offset), 0, length + align);
+
+ /* Allocate Rx BDs */
+ length = uec_info->rx_bd_ring_len * SIZEOFBD;
+ align = UEC_RX_BD_RING_ALIGNMENT;
+ uec->rx_bd_ring_offset = (u32)(malloc((u32)(length + align)));
+ if (uec->rx_bd_ring_offset != 0) {
+ uec->p_rx_bd_ring = (u8 *)((uec->rx_bd_ring_offset + align)
+ & ~(align - 1));
+ }
+
+ /* Zero all of Rx BDs */
+ memset((void *)(uec->rx_bd_ring_offset), 0, length + align);
+
+ /* Allocate Rx buffer */
+ length = uec_info->rx_bd_ring_len * MAX_RXBUF_LEN;
+ align = UEC_RX_DATA_BUF_ALIGNMENT;
+ uec->rx_buf_offset = (u32)malloc(length + align);
+ if (uec->rx_buf_offset != 0) {
+ uec->p_rx_buf = (u8 *)((uec->rx_buf_offset + align)
+ & ~(align - 1));
+ }
+
+ /* Zero all of the Rx buffer */
+ memset((void *)(uec->rx_buf_offset), 0, length + align);
+
+ /* Init TxBD ring */
+ bd = (qe_bd_t *)uec->p_tx_bd_ring;
+ uec->txBd = bd;
+
+ for (i = 0; i < uec_info->tx_bd_ring_len; i++) {
+ BD_DATA_CLEAR(bd);
+ BD_STATUS_SET(bd, 0);
+ BD_LENGTH_SET(bd, 0);
+ bd ++;
+ }
+ BD_STATUS_SET((--bd), TxBD_WRAP);
+
+ /* Init RxBD ring */
+ bd = (qe_bd_t *)uec->p_rx_bd_ring;
+ uec->rxBd = bd;
+ buf = uec->p_rx_buf;
+ for (i = 0; i < uec_info->rx_bd_ring_len; i++) {
+ BD_DATA_SET(bd, buf);
+ BD_LENGTH_SET(bd, 0);
+ BD_STATUS_SET(bd, RxBD_EMPTY);
+ buf += MAX_RXBUF_LEN;
+ bd ++;
+ }
+ BD_STATUS_SET((--bd), RxBD_WRAP | RxBD_EMPTY);
+
+ /* Init global Tx parameter RAM */
+ uec_init_tx_parameter(uec, num_threads_tx);
+
+ /* Init global Rx parameter RAM */
+ uec_init_rx_parameter(uec, num_threads_rx);
+
+ /* Init ethernet Tx and Rx parameter command */
+ if (uec_issue_init_enet_rxtx_cmd(uec, num_threads_tx,
+ num_threads_rx)) {
+ printf("%s issue init enet cmd failed\n", __FUNCTION__);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static int uec_init(struct eth_device* dev, bd_t *bd)
+{
+ uec_private_t *uec;
+ int err;
+
+ uec = (uec_private_t *)dev->priv;
+
+ if (uec->the_first_run == 0) {
+ /* Set up the MAC address */
+ if (dev->enetaddr[0] & 0x01) {
+ printf("%s: MacAddress is multcast address\n",
+ __FUNCTION__);
+ return -EINVAL;
+ }
+ uec_set_mac_address(uec, dev->enetaddr);
+ uec->the_first_run = 1;
+ }
+
+ err = uec_open(uec, COMM_DIR_RX_AND_TX);
+ if (err) {
+ printf("%s: cannot enable UEC device\n", dev->name);
+ return err;
+ }
+
+ return 0;
+}
+
+static void uec_halt(struct eth_device* dev)
+{
+ uec_private_t *uec = (uec_private_t *)dev->priv;
+ uec_stop(uec, COMM_DIR_RX_AND_TX);
+}
+
+static int uec_send(struct eth_device* dev, volatile void *buf, int len)
+{
+ uec_private_t *uec;
+ ucc_fast_private_t *uccf;
+ volatile qe_bd_t *bd;
+ volatile u16 status;
+ int i;
+ int result = 0;
+
+ uec = (uec_private_t *)dev->priv;
+ uccf = uec->uccf;
+ bd = uec->txBd;
+
+ /* Find an empty TxBD */
+ for (i = 0; BD_STATUS(bd) & TxBD_READY; i++) {
+ if (i > 0x100000) {
+ printf("%s: tx buffer not ready\n", dev->name);
+ return result;
+ }
+ }
+
+ /* Init TxBD */
+ BD_DATA_SET(bd, buf);
+ BD_LENGTH_SET(bd, len);
+ status = BD_STATUS(bd);
+ status &= BD_WRAP;
+ status |= (TxBD_READY | TxBD_LAST);
+ BD_STATUS_SET(bd, status);
+
+ /* Tell UCC to transmit the buffer */
+ ucc_fast_transmit_on_demand(uccf);
+
+ /* Wait for buffer to be transmitted */
+ status = BD_STATUS(bd);
+ for (i = 0; status & TxBD_READY; i++) {
+ if (i > 0x100000) {
+ printf("%s: tx error\n", dev->name);
+ return result;
+ }
+ status = BD_STATUS(bd);
+ }
+
+ /* Ok, the buffer be transimitted */
+ BD_ADVANCE(bd, status, uec->p_tx_bd_ring);
+ uec->txBd = bd;
+ result = 1;
+
+ return result;
+}
+
+static int uec_recv(struct eth_device* dev)
+{
+ uec_private_t *uec = dev->priv;
+ volatile qe_bd_t *bd;
+ volatile u16 status;
+ u16 len;
+ u8 *data;
+
+ bd = uec->rxBd;
+ status = BD_STATUS(bd);
+
+ while (!(status & RxBD_EMPTY)) {
+ if (!(status & RxBD_ERROR)) {
+ data = BD_DATA(bd);
+ len = BD_LENGTH(bd);
+ NetReceive(data, len);
+ } else {
+ printf("%s: Rx error\n", dev->name);
+ }
+ status &= BD_CLEAN;
+ BD_LENGTH_SET(bd, 0);
+ BD_STATUS_SET(bd, status | RxBD_EMPTY);
+ BD_ADVANCE(bd, status, uec->p_rx_bd_ring);
+ status = BD_STATUS(bd);
+ }
+ uec->rxBd = bd;
+
+ return 1;
+}
+
+int uec_initialize(int index)
+{
+ struct eth_device *dev;
+ int i;
+ uec_private_t *uec;
+ uec_info_t *uec_info;
+ int err;
+
+ dev = (struct eth_device *)malloc(sizeof(struct eth_device));
+ if (!dev)
+ return 0;
+ memset(dev, 0, sizeof(struct eth_device));
+
+ /* Allocate the UEC private struct */
+ uec = (uec_private_t *)malloc(sizeof(uec_private_t));
+ if (!uec) {
+ return -ENOMEM;
+ }
+ memset(uec, 0, sizeof(uec_private_t));
+
+ /* Init UEC private struct, they come from board.h */
+ if (index == 0) {
+#ifdef CONFIG_UEC_ETH1
+ uec_info = ð1_uec_info;
+#endif
+ } else if (index == 1) {
+#ifdef CONFIG_UEC_ETH2
+ uec_info = ð2_uec_info;
+#endif
+ } else {
+ printf("%s: index is illegal.\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ uec->uec_info = uec_info;
+
+ sprintf(dev->name, "FSL UEC%d", index);
+ dev->iobase = 0;
+ dev->priv = (void *)uec;
+ dev->init = uec_init;
+ dev->halt = uec_halt;
+ dev->send = uec_send;
+ dev->recv = uec_recv;
+
+ /* Clear the ethnet address */
+ for (i = 0; i < 6; i++)
+ dev->enetaddr[i] = 0;
+
+ eth_register(dev);
+
+ err = uec_startup(uec);
+ if (err) {
+ printf("%s: Cannot configure net device, aborting.",dev->name);
+ return err;
+ }
+
+ err = init_phy(dev);
+ if (err) {
+ printf("%s: Cannot initialize PHY, aborting.\n", dev->name);
+ return err;
+ }
+
+ phy_change(dev);
+
+ return 1;
+}
+#endif /* CONFIG_QE */
diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h
new file mode 100644
index 0000000..0495026
--- /dev/null
+++ b/drivers/qe/uec.h
@@ -0,0 +1,716 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ * based on source code of Shlomi Gridish
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __UEC_H__
+#define __UEC_H__
+
+#define MAX_TX_THREADS 8
+#define MAX_RX_THREADS 8
+#define MAX_TX_QUEUES 8
+#define MAX_RX_QUEUES 8
+#define MAX_PREFETCHED_BDS 4
+#define MAX_IPH_OFFSET_ENTRY 8
+#define MAX_ENET_INIT_PARAM_ENTRIES_RX 9
+#define MAX_ENET_INIT_PARAM_ENTRIES_TX 8
+
+/* UEC UPSMR (Protocol Specific Mode Register)
+ */
+#define UPSMR_ECM 0x04000000 /* Enable CAM Miss */
+#define UPSMR_HSE 0x02000000 /* Hardware Statistics Enable */
+#define UPSMR_PRO 0x00400000 /* Promiscuous */
+#define UPSMR_CAP 0x00200000 /* CAM polarity */
+#define UPSMR_RSH 0x00100000 /* Receive Short Frames */
+#define UPSMR_RPM 0x00080000 /* Reduced Pin Mode interfaces */
+#define UPSMR_R10M 0x00040000 /* RGMII/RMII 10 Mode */
+#define UPSMR_RLPB 0x00020000 /* RMII Loopback Mode */
+#define UPSMR_TBIM 0x00010000 /* Ten-bit Interface Mode */
+#define UPSMR_RMM 0x00001000 /* RMII/RGMII Mode */
+#define UPSMR_CAM 0x00000400 /* CAM Address Matching */
+#define UPSMR_BRO 0x00000200 /* Broadcast Address */
+#define UPSMR_RES1 0x00002000 /* Reserved feild - must be 1 */
+
+#define UPSMR_INIT_VALUE (UPSMR_HSE | UPSMR_RES1)
+
+/* UEC MACCFG1 (MAC Configuration 1 Register)
+ */
+#define MACCFG1_FLOW_RX 0x00000020 /* Flow Control Rx */
+#define MACCFG1_FLOW_TX 0x00000010 /* Flow Control Tx */
+#define MACCFG1_ENABLE_SYNCHED_RX 0x00000008 /* Enable Rx Sync */
+#define MACCFG1_ENABLE_RX 0x00000004 /* Enable Rx */
+#define MACCFG1_ENABLE_SYNCHED_TX 0x00000002 /* Enable Tx Sync */
+#define MACCFG1_ENABLE_TX 0x00000001 /* Enable Tx */
+
+#define MACCFG1_INIT_VALUE (0)
+
+/* UEC MACCFG2 (MAC Configuration 2 Register)
+ */
+#define MACCFG2_PREL 0x00007000
+#define MACCFG2_PREL_SHIFT (31 - 19)
+#define MACCFG2_PREL_MASK 0x0000f000
+#define MACCFG2_SRP 0x00000080
+#define MACCFG2_STP 0x00000040
+#define MACCFG2_RESERVED_1 0x00000020 /* must be set */
+#define MACCFG2_LC 0x00000010 /* Length Check */
+#define MACCFG2_MPE 0x00000008
+#define MACCFG2_FDX 0x00000001 /* Full Duplex */
+#define MACCFG2_FDX_MASK 0x00000001
+#define MACCFG2_PAD_CRC 0x00000004
+#define MACCFG2_CRC_EN 0x00000002
+#define MACCFG2_PAD_AND_CRC_MODE_NONE 0x00000000
+#define MACCFG2_PAD_AND_CRC_MODE_CRC_ONLY 0x00000002
+#define MACCFG2_PAD_AND_CRC_MODE_PAD_AND_CRC 0x00000004
+#define MACCFG2_INTERFACE_MODE_NIBBLE 0x00000100
+#define MACCFG2_INTERFACE_MODE_BYTE 0x00000200
+#define MACCFG2_INTERFACE_MODE_MASK 0x00000300
+
+#define MACCFG2_INIT_VALUE (MACCFG2_PREL | MACCFG2_RESERVED_1 | \
+ MACCFG2_LC | MACCFG2_PAD_CRC | MACCFG2_FDX)
+
+/* UEC Event Register
+*/
+#define UCCE_MPD 0x80000000
+#define UCCE_SCAR 0x40000000
+#define UCCE_GRA 0x20000000
+#define UCCE_CBPR 0x10000000
+#define UCCE_BSY 0x08000000
+#define UCCE_RXC 0x04000000
+#define UCCE_TXC 0x02000000
+#define UCCE_TXE 0x01000000
+#define UCCE_TXB7 0x00800000
+#define UCCE_TXB6 0x00400000
+#define UCCE_TXB5 0x00200000
+#define UCCE_TXB4 0x00100000
+#define UCCE_TXB3 0x00080000
+#define UCCE_TXB2 0x00040000
+#define UCCE_TXB1 0x00020000
+#define UCCE_TXB0 0x00010000
+#define UCCE_RXB7 0x00008000
+#define UCCE_RXB6 0x00004000
+#define UCCE_RXB5 0x00002000
+#define UCCE_RXB4 0x00001000
+#define UCCE_RXB3 0x00000800
+#define UCCE_RXB2 0x00000400
+#define UCCE_RXB1 0x00000200
+#define UCCE_RXB0 0x00000100
+#define UCCE_RXF7 0x00000080
+#define UCCE_RXF6 0x00000040
+#define UCCE_RXF5 0x00000020
+#define UCCE_RXF4 0x00000010
+#define UCCE_RXF3 0x00000008
+#define UCCE_RXF2 0x00000004
+#define UCCE_RXF1 0x00000002
+#define UCCE_RXF0 0x00000001
+
+#define UCCE_TXB (UCCE_TXB7 | UCCE_TXB6 | UCCE_TXB5 | UCCE_TXB4 | \
+ UCCE_TXB3 | UCCE_TXB2 | UCCE_TXB1 | UCCE_TXB0)
+#define UCCE_RXB (UCCE_RXB7 | UCCE_RXB6 | UCCE_RXB5 | UCCE_RXB4 | \
+ UCCE_RXB3 | UCCE_RXB2 | UCCE_RXB1 | UCCE_RXB0)
+#define UCCE_RXF (UCCE_RXF7 | UCCE_RXF6 | UCCE_RXF5 | UCCE_RXF4 | \
+ UCCE_RXF3 | UCCE_RXF2 | UCCE_RXF1 | UCCE_RXF0)
+#define UCCE_OTHER (UCCE_SCAR | UCCE_GRA | UCCE_CBPR | UCCE_BSY | \
+ UCCE_RXC | UCCE_TXC | UCCE_TXE)
+
+/* UEC TEMODR Register
+*/
+#define TEMODER_SCHEDULER_ENABLE 0x2000
+#define TEMODER_IP_CHECKSUM_GENERATE 0x0400
+#define TEMODER_PERFORMANCE_OPTIMIZATION_MODE1 0x0200
+#define TEMODER_RMON_STATISTICS 0x0100
+#define TEMODER_NUM_OF_QUEUES_SHIFT (15-15)
+
+#define TEMODER_INIT_VALUE 0xc000
+
+/* UEC REMODR Register
+*/
+#define REMODER_RX_RMON_STATISTICS_ENABLE 0x00001000
+#define REMODER_RX_EXTENDED_FEATURES 0x80000000
+#define REMODER_VLAN_OPERATION_TAGGED_SHIFT (31-9 )
+#define REMODER_VLAN_OPERATION_NON_TAGGED_SHIFT (31-10)
+#define REMODER_RX_QOS_MODE_SHIFT (31-15)
+#define REMODER_RMON_STATISTICS 0x00001000
+#define REMODER_RX_EXTENDED_FILTERING 0x00000800
+#define REMODER_NUM_OF_QUEUES_SHIFT (31-23)
+#define REMODER_DYNAMIC_MAX_FRAME_LENGTH 0x00000008
+#define REMODER_DYNAMIC_MIN_FRAME_LENGTH 0x00000004
+#define REMODER_IP_CHECKSUM_CHECK 0x00000002
+#define REMODER_IP_ADDRESS_ALIGNMENT 0x00000001
+
+#define REMODER_INIT_VALUE 0
+
+/* BMRx - Bus Mode Register */
+#define BMR_GLB 0x20
+#define BMR_BO_BE 0x10
+#define BMR_DTB_SECONDARY_BUS 0x02
+#define BMR_BDB_SECONDARY_BUS 0x01
+
+#define BMR_SHIFT 24
+#define BMR_INIT_VALUE (BMR_GLB | BMR_BO_BE)
+
+/* UEC UCCS (Ethernet Status Register)
+ */
+#define UCCS_BPR 0x02
+#define UCCS_PAU 0x02
+#define UCCS_MPD 0x01
+
+/* UEC MIIMCFG (MII Management Configuration Register)
+ */
+#define MIIMCFG_RESET_MANAGEMENT 0x80000000
+#define MIIMCFG_NO_PREAMBLE 0x00000010
+#define MIIMCFG_CLOCK_DIVIDE_SHIFT (31 - 31)
+#define MIIMCFG_CLOCK_DIVIDE_MASK 0x0000000f
+#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_4 0x00000001
+#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_6 0x00000002
+#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_8 0x00000003
+#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_10 0x00000004
+#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_14 0x00000005
+#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_20 0x00000006
+#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_28 0x00000007
+
+#define MIIMCFG_MNGMNT_CLC_DIV_INIT_VALUE \
+ MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_10
+
+/* UEC MIIMCOM (MII Management Command Register)
+ */
+#define MIIMCOM_SCAN_CYCLE 0x00000002 /* Scan cycle */
+#define MIIMCOM_READ_CYCLE 0x00000001 /* Read cycle */
+
+/* UEC MIIMADD (MII Management Address Register)
+ */
+#define MIIMADD_PHY_ADDRESS_SHIFT (31 - 23)
+#define MIIMADD_PHY_REGISTER_SHIFT (31 - 31)
+
+/* UEC MIIMCON (MII Management Control Register)
+ */
+#define MIIMCON_PHY_CONTROL_SHIFT (31 - 31)
+#define MIIMCON_PHY_STATUS_SHIFT (31 - 31)
+
+/* UEC MIIMIND (MII Management Indicator Register)
+ */
+#define MIIMIND_NOT_VALID 0x00000004
+#define MIIMIND_SCAN 0x00000002
+#define MIIMIND_BUSY 0x00000001
+
+/* UEC UTBIPAR (Ten Bit Interface Physical Address Register)
+ */
+#define UTBIPAR_PHY_ADDRESS_SHIFT (31 - 31)
+#define UTBIPAR_PHY_ADDRESS_MASK 0x0000001f
+
+/* UEC UESCR (Ethernet Statistics Control Register)
+ */
+#define UESCR_AUTOZ 0x8000
+#define UESCR_CLRCNT 0x4000
+#define UESCR_MAXCOV_SHIFT (15 - 7)
+#define UESCR_SCOV_SHIFT (15 - 15)
+
+/****** Tx data struct collection ******/
+/* Tx thread data, each Tx thread has one this struct.
+*/
+typedef struct uec_thread_data_tx {
+ u8 res0[136];
+} __attribute__ ((packed)) uec_thread_data_tx_t;
+
+/* Tx thread parameter, each Tx thread has one this struct.
+*/
+typedef struct uec_thread_tx_pram {
+ u8 res0[64];
+} __attribute__ ((packed)) uec_thread_tx_pram_t;
+
+/* Send queue queue-descriptor, each Tx queue has one this QD
+*/
+typedef struct uec_send_queue_qd {
+ u32 bd_ring_base; /* pointer to BD ring base address */
+ u8 res0[0x8];
+ u32 last_bd_completed_address; /* last entry in BD ring */
+ u8 res1[0x30];
+} __attribute__ ((packed)) uec_send_queue_qd_t;
+
+/* Send queue memory region */
+typedef struct uec_send_queue_mem_region {
+ uec_send_queue_qd_t sqqd[MAX_TX_QUEUES];
+} __attribute__ ((packed)) uec_send_queue_mem_region_t;
+
+/* Scheduler struct
+*/
+typedef struct uec_scheduler {
+ u16 cpucount0; /* CPU packet counter */
+ u16 cpucount1; /* CPU packet counter */
+ u16 cecount0; /* QE packet counter */
+ u16 cecount1; /* QE packet counter */
+ u16 cpucount2; /* CPU packet counter */
+ u16 cpucount3; /* CPU packet counter */
+ u16 cecount2; /* QE packet counter */
+ u16 cecount3; /* QE packet counter */
+ u16 cpucount4; /* CPU packet counter */
+ u16 cpucount5; /* CPU packet counter */
+ u16 cecount4; /* QE packet counter */
+ u16 cecount5; /* QE packet counter */
+ u16 cpucount6; /* CPU packet counter */
+ u16 cpucount7; /* CPU packet counter */
+ u16 cecount6; /* QE packet counter */
+ u16 cecount7; /* QE packet counter */
+ u32 weightstatus[MAX_TX_QUEUES]; /* accumulated weight factor */
+ u32 rtsrshadow; /* temporary variable handled by QE */
+ u32 time; /* temporary variable handled by QE */
+ u32 ttl; /* temporary variable handled by QE */
+ u32 mblinterval; /* max burst length interval */
+ u16 nortsrbytetime; /* normalized value of byte time in tsr units */
+ u8 fracsiz;
+ u8 res0[1];
+ u8 strictpriorityq; /* Strict Priority Mask register */
+ u8 txasap; /* Transmit ASAP register */
+ u8 extrabw; /* Extra BandWidth register */
+ u8 oldwfqmask; /* temporary variable handled by QE */
+ u8 weightfactor[MAX_TX_QUEUES]; /**< weight factor for queues */
+ u32 minw; /* temporary variable handled by QE */
+ u8 res1[0x70-0x64];
+} __attribute__ ((packed)) uec_scheduler_t;
+
+/* Tx firmware counters
+*/
+typedef struct uec_tx_firmware_statistics_pram {
+ u32 sicoltx; /* single collision */
+ u32 mulcoltx; /* multiple collision */
+ u32 latecoltxfr; /* late collision */
+ u32 frabortduecol; /* frames aborted due to tx collision */
+ u32 frlostinmactxer; /* frames lost due to internal MAC error tx */
+ u32 carriersenseertx; /* carrier sense error */
+ u32 frtxok; /* frames transmitted OK */
+ u32 txfrexcessivedefer;
+ u32 txpkts256; /* total packets(including bad) 256~511 B */
+ u32 txpkts512; /* total packets(including bad) 512~1023B */
+ u32 txpkts1024; /* total packets(including bad) 1024~1518B */
+ u32 txpktsjumbo; /* total packets(including bad) >1024 */
+} __attribute__ ((packed)) uec_tx_firmware_statistics_pram_t;
+
+/* Tx global parameter table
+*/
+typedef struct uec_tx_global_pram {
+ u16 temoder;
+ u8 res0[0x38-0x02];
+ u32 sqptr;
+ u32 schedulerbasepointer;
+ u32 txrmonbaseptr;
+ u32 tstate;
+ u8 iphoffset[MAX_IPH_OFFSET_ENTRY];
+ u32 vtagtable[0x8];
+ u32 tqptr;
+ u8 res2[0x80-0x74];
+} __attribute__ ((packed)) uec_tx_global_pram_t;
+
+
+/****** Rx data struct collection ******/
+/* Rx thread data, each Rx thread has one this struct.
+*/
+typedef struct uec_thread_data_rx {
+ u8 res0[40];
+} __attribute__ ((packed)) uec_thread_data_rx_t;
+
+/* Rx thread parameter, each Rx thread has one this struct.
+*/
+typedef struct uec_thread_rx_pram {
+ u8 res0[128];
+} __attribute__ ((packed)) uec_thread_rx_pram_t;
+
+/* Rx firmware counters
+*/
+typedef struct uec_rx_firmware_statistics_pram {
+ u32 frrxfcser; /* frames with crc error */
+ u32 fraligner; /* frames with alignment error */
+ u32 inrangelenrxer; /* in range length error */
+ u32 outrangelenrxer; /* out of range length error */
+ u32 frtoolong; /* frame too long */
+ u32 runt; /* runt */
+ u32 verylongevent; /* very long event */
+ u32 symbolerror; /* symbol error */
+ u32 dropbsy; /* drop because of BD not ready */
+ u8 res0[0x8];
+ u32 mismatchdrop; /* drop because of MAC filtering */
+ u32 underpkts; /* total frames less than 64 octets */
+ u32 pkts256; /* total frames(including bad)256~511 B */
+ u32 pkts512; /* total frames(including bad)512~1023 B */
+ u32 pkts1024; /* total frames(including bad)1024~1518 B */
+ u32 pktsjumbo; /* total frames(including bad) >1024 B */
+ u32 frlossinmacer;
+ u32 pausefr; /* pause frames */
+ u8 res1[0x4];
+ u32 removevlan;
+ u32 replacevlan;
+ u32 insertvlan;
+} __attribute__ ((packed)) uec_rx_firmware_statistics_pram_t;
+
+/* Rx interrupt coalescing entry, each Rx queue has one this entry.
+*/
+typedef struct uec_rx_interrupt_coalescing_entry {
+ u32 maxvalue;
+ u32 counter;
+} __attribute__ ((packed)) uec_rx_interrupt_coalescing_entry_t;
+
+typedef struct uec_rx_interrupt_coalescing_table {
+ uec_rx_interrupt_coalescing_entry_t entry[MAX_RX_QUEUES];
+} __attribute__ ((packed)) uec_rx_interrupt_coalescing_table_t;
+
+/* RxBD queue entry, each Rx queue has one this entry.
+*/
+typedef struct uec_rx_bd_queues_entry {
+ u32 bdbaseptr; /* BD base pointer */
+ u32 bdptr; /* BD pointer */
+ u32 externalbdbaseptr; /* external BD base pointer */
+ u32 externalbdptr; /* external BD pointer */
+} __attribute__ ((packed)) uec_rx_bd_queues_entry_t;
+
+/* Rx global paramter table
+*/
+typedef struct uec_rx_global_pram {
+ u32 remoder; /* ethernet mode reg. */
+ u32 rqptr; /* base pointer to the Rx Queues */
+ u32 res0[0x1];
+ u8 res1[0x20-0xC];
+ u16 typeorlen;
+ u8 res2[0x1];
+ u8 rxgstpack; /* ack on GRACEFUL STOP RX command */
+ u32 rxrmonbaseptr; /* Rx RMON statistics base */
+ u8 res3[0x30-0x28];
+ u32 intcoalescingptr; /* Interrupt coalescing table pointer */
+ u8 res4[0x36-0x34];
+ u8 rstate;
+ u8 res5[0x46-0x37];
+ u16 mrblr; /* max receive buffer length reg. */
+ u32 rbdqptr; /* RxBD parameter table description */
+ u16 mflr; /* max frame length reg. */
+ u16 minflr; /* min frame length reg. */
+ u16 maxd1; /* max dma1 length reg. */
+ u16 maxd2; /* max dma2 length reg. */
+ u32 ecamptr; /* external CAM address */
+ u32 l2qt; /* VLAN priority mapping table. */
+ u32 l3qt[0x8]; /* IP priority mapping table. */
+ u16 vlantype; /* vlan type */
+ u16 vlantci; /* default vlan tci */
+ u8 addressfiltering[64];/* address filtering data structure */
+ u32 exfGlobalParam; /* extended filtering global parameters */
+ u8 res6[0x100-0xC4]; /* Initialize to zero */
+} __attribute__ ((packed)) uec_rx_global_pram_t;
+
+#define GRACEFUL_STOP_ACKNOWLEDGE_RX 0x01
+
+
+/****** UEC common ******/
+/* UCC statistics - hardware counters
+*/
+typedef struct uec_hardware_statistics {
+ u32 tx64;
+ u32 tx127;
+ u32 tx255;
+ u32 rx64;
+ u32 rx127;
+ u32 rx255;
+ u32 txok;
+ u16 txcf;
+ u32 tmca;
+ u32 tbca;
+ u32 rxfok;
+ u32 rxbok;
+ u32 rbyt;
+ u32 rmca;
+ u32 rbca;
+} __attribute__ ((packed)) uec_hardware_statistics_t;
+
+/* InitEnet command parameter
+*/
+typedef struct uec_init_cmd_pram {
+ u8 resinit0;
+ u8 resinit1;
+ u8 resinit2;
+ u8 resinit3;
+ u16 resinit4;
+ u8 res1[0x1];
+ u8 largestexternallookupkeysize;
+ u32 rgftgfrxglobal;
+ u32 rxthread[MAX_ENET_INIT_PARAM_ENTRIES_RX]; /* rx threads */
+ u8 res2[0x38 - 0x30];
+ u32 txglobal; /* tx global */
+ u32 txthread[MAX_ENET_INIT_PARAM_ENTRIES_TX]; /* tx threads */
+ u8 res3[0x1];
+} __attribute__ ((packed)) uec_init_cmd_pram_t;
+
+#define ENET_INIT_PARAM_RGF_SHIFT (32 - 4)
+#define ENET_INIT_PARAM_TGF_SHIFT (32 - 8)
+
+#define ENET_INIT_PARAM_RISC_MASK 0x0000003f
+#define ENET_INIT_PARAM_PTR_MASK 0x00ffffc0
+#define ENET_INIT_PARAM_SNUM_MASK 0xff000000
+#define ENET_INIT_PARAM_SNUM_SHIFT 24
+
+#define ENET_INIT_PARAM_MAGIC_RES_INIT0 0x06
+#define ENET_INIT_PARAM_MAGIC_RES_INIT1 0x30
+#define ENET_INIT_PARAM_MAGIC_RES_INIT2 0xff
+#define ENET_INIT_PARAM_MAGIC_RES_INIT3 0x00
+#define ENET_INIT_PARAM_MAGIC_RES_INIT4 0x0400
+
+/* structure representing 82xx Address Filtering Enet Address in PRAM
+*/
+typedef struct uec_82xx_enet_address {
+ u8 res1[0x2];
+ u16 h; /* address (MSB) */
+ u16 m; /* address */
+ u16 l; /* address (LSB) */
+} __attribute__ ((packed)) uec_82xx_enet_address_t;
+
+/* structure representing 82xx Address Filtering PRAM
+*/
+typedef struct uec_82xx_address_filtering_pram {
+ u32 iaddr_h; /* individual address filter, high */
+ u32 iaddr_l; /* individual address filter, low */
+ u32 gaddr_h; /* group address filter, high */
+ u32 gaddr_l; /* group address filter, low */
+ uec_82xx_enet_address_t taddr;
+ uec_82xx_enet_address_t paddr[4];
+ u8 res0[0x40-0x38];
+} __attribute__ ((packed)) uec_82xx_address_filtering_pram_t;
+
+/* Buffer Descriptor
+*/
+typedef struct buffer_descriptor {
+ u16 status;
+ u16 len;
+ u32 data;
+} __attribute__ ((packed)) qe_bd_t, *p_bd_t;
+
+#define SIZEOFBD sizeof(qe_bd_t)
+
+/* Common BD flags
+*/
+#define BD_WRAP 0x2000
+#define BD_INT 0x1000
+#define BD_LAST 0x0800
+#define BD_CLEAN 0x3000
+
+/* TxBD status flags
+*/
+#define TxBD_READY 0x8000
+#define TxBD_PADCRC 0x4000
+#define TxBD_WRAP BD_WRAP
+#define TxBD_INT BD_INT
+#define TxBD_LAST BD_LAST
+#define TxBD_TXCRC 0x0400
+#define TxBD_DEF 0x0200
+#define TxBD_PP 0x0100
+#define TxBD_LC 0x0080
+#define TxBD_RL 0x0040
+#define TxBD_RC 0x003C
+#define TxBD_UNDERRUN 0x0002
+#define TxBD_TRUNC 0x0001
+
+#define TxBD_ERROR (TxBD_UNDERRUN | TxBD_TRUNC)
+
+/* RxBD status flags
+*/
+#define RxBD_EMPTY 0x8000
+#define RxBD_OWNER 0x4000
+#define RxBD_WRAP BD_WRAP
+#define RxBD_INT BD_INT
+#define RxBD_LAST BD_LAST
+#define RxBD_FIRST 0x0400
+#define RxBD_CMR 0x0200
+#define RxBD_MISS 0x0100
+#define RxBD_BCAST 0x0080
+#define RxBD_MCAST 0x0040
+#define RxBD_LG 0x0020
+#define RxBD_NO 0x0010
+#define RxBD_SHORT 0x0008
+#define RxBD_CRCERR 0x0004
+#define RxBD_OVERRUN 0x0002
+#define RxBD_IPCH 0x0001
+
+#define RxBD_ERROR (RxBD_LG | RxBD_NO | RxBD_SHORT | \
+ RxBD_CRCERR | RxBD_OVERRUN)
+
+/* BD access macros
+*/
+#define BD_STATUS(_bd) (((p_bd_t)(_bd))->status)
+#define BD_STATUS_SET(_bd, _val) (((p_bd_t)(_bd))->status = _val)
+#define BD_LENGTH(_bd) (((p_bd_t)(_bd))->len)
+#define BD_LENGTH_SET(_bd, _val) (((p_bd_t)(_bd))->len = _val)
+#define BD_DATA_CLEAR(_bd) (((p_bd_t)(_bd))->data = 0)
+#define BD_IS_DATA(_bd) (((p_bd_t)(_bd))->data)
+#define BD_DATA(_bd) ((u8 *)(((p_bd_t)(_bd))->data))
+#define BD_DATA_SET(_bd, _data) (((p_bd_t)(_bd))->data = (u32)(_data))
+#define BD_ADVANCE(_bd,_status,_base) \
+ (((_status) & BD_WRAP) ? (_bd) = ((p_bd_t)(_base)) : ++(_bd))
+
+/* Rx Prefetched BDs
+*/
+typedef struct uec_rx_prefetched_bds {
+ qe_bd_t bd[MAX_PREFETCHED_BDS]; /* prefetched bd */
+} __attribute__ ((packed)) uec_rx_prefetched_bds_t;
+
+/* Alignments
+ */
+#define UEC_RX_GLOBAL_PRAM_ALIGNMENT 64
+#define UEC_TX_GLOBAL_PRAM_ALIGNMENT 64
+#define UEC_THREAD_RX_PRAM_ALIGNMENT 128
+#define UEC_THREAD_TX_PRAM_ALIGNMENT 64
+#define UEC_THREAD_DATA_ALIGNMENT 256
+#define UEC_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT 32
+#define UEC_SCHEDULER_ALIGNMENT 4
+#define UEC_TX_STATISTICS_ALIGNMENT 4
+#define UEC_RX_STATISTICS_ALIGNMENT 4
+#define UEC_RX_INTERRUPT_COALESCING_ALIGNMENT 4
+#define UEC_RX_BD_QUEUES_ALIGNMENT 8
+#define UEC_RX_PREFETCHED_BDS_ALIGNMENT 128
+#define UEC_RX_EXTENDED_FILTERING_GLOBAL_PARAMETERS_ALIGNMENT 4
+#define UEC_RX_BD_RING_ALIGNMENT 32
+#define UEC_TX_BD_RING_ALIGNMENT 32
+#define UEC_MRBLR_ALIGNMENT 128
+#define UEC_RX_BD_RING_SIZE_ALIGNMENT 4
+#define UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT 32
+#define UEC_RX_DATA_BUF_ALIGNMENT 64
+
+#define UEC_VLAN_PRIORITY_MAX 8
+#define UEC_IP_PRIORITY_MAX 64
+#define UEC_TX_VTAG_TABLE_ENTRY_MAX 8
+#define UEC_RX_BD_RING_SIZE_MIN 8
+#define UEC_TX_BD_RING_SIZE_MIN 2
+
+/* Ethernet speed
+*/
+typedef enum enet_speed {
+ ENET_SPEED_10BT, /* 10 Base T */
+ ENET_SPEED_100BT, /* 100 Base T */
+ ENET_SPEED_1000BT /* 1000 Base T */
+} enet_speed_e;
+
+/* Ethernet Address Type.
+*/
+typedef enum enet_addr_type {
+ ENET_ADDR_TYPE_INDIVIDUAL,
+ ENET_ADDR_TYPE_GROUP,
+ ENET_ADDR_TYPE_BROADCAST
+} enet_addr_type_e;
+
+/* TBI / MII Set Register
+*/
+typedef enum enet_tbi_mii_reg {
+ ENET_TBI_MII_CR = 0x00,
+ ENET_TBI_MII_SR = 0x01,
+ ENET_TBI_MII_ANA = 0x04,
+ ENET_TBI_MII_ANLPBPA = 0x05,
+ ENET_TBI_MII_ANEX = 0x06,
+ ENET_TBI_MII_ANNPT = 0x07,
+ ENET_TBI_MII_ANLPANP = 0x08,
+ ENET_TBI_MII_EXST = 0x0F,
+ ENET_TBI_MII_JD = 0x10,
+ ENET_TBI_MII_TBICON = 0x11
+} enet_tbi_mii_reg_e;
+
+/* UEC number of threads
+*/
+typedef enum uec_num_of_threads {
+ UEC_NUM_OF_THREADS_1 = 0x1, /* 1 */
+ UEC_NUM_OF_THREADS_2 = 0x2, /* 2 */
+ UEC_NUM_OF_THREADS_4 = 0x0, /* 4 */
+ UEC_NUM_OF_THREADS_6 = 0x3, /* 6 */
+ UEC_NUM_OF_THREADS_8 = 0x4 /* 8 */
+} uec_num_of_threads_e;
+
+/* UEC ethernet interface type
+*/
+typedef enum enet_interface {
+ ENET_10_MII,
+ ENET_10_RMII,
+ ENET_10_RGMII,
+ ENET_100_MII,
+ ENET_100_RMII,
+ ENET_100_RGMII,
+ ENET_1000_GMII,
+ ENET_1000_RGMII,
+ ENET_1000_TBI,
+ ENET_1000_RTBI
+} enet_interface_e;
+
+/* UEC initialization info struct
+*/
+typedef struct uec_info {
+ ucc_fast_info_t uf_info;
+ uec_num_of_threads_e num_threads_tx;
+ uec_num_of_threads_e num_threads_rx;
+ qe_risc_allocation_e riscTx;
+ qe_risc_allocation_e riscRx;
+ u16 rx_bd_ring_len;
+ u16 tx_bd_ring_len;
+ u8 phy_address;
+ enet_interface_e enet_interface;
+} uec_info_t;
+
+/* UEC driver initialized info
+*/
+#define MAX_RXBUF_LEN 1536
+#define MAX_FRAME_LEN 1518
+#define MIN_FRAME_LEN 64
+#define MAX_DMA1_LEN 1520
+#define MAX_DMA2_LEN 1520
+
+/* UEC driver private struct
+*/
+typedef struct uec_private {
+ uec_info_t *uec_info;
+ ucc_fast_private_t *uccf;
+ struct eth_device *dev;
+ uec_t *uec_regs;
+ /* enet init command parameter */
+ uec_init_cmd_pram_t *p_init_enet_param;
+ u32 init_enet_param_offset;
+ /* Rx and Tx paramter */
+ uec_rx_global_pram_t *p_rx_glbl_pram;
+ u32 rx_glbl_pram_offset;
+ uec_tx_global_pram_t *p_tx_glbl_pram;
+ u32 tx_glbl_pram_offset;
+ uec_send_queue_mem_region_t *p_send_q_mem_reg;
+ u32 send_q_mem_reg_offset;
+ uec_thread_data_tx_t *p_thread_data_tx;
+ u32 thread_dat_tx_offset;
+ uec_thread_data_rx_t *p_thread_data_rx;
+ u32 thread_dat_rx_offset;
+ uec_rx_bd_queues_entry_t *p_rx_bd_qs_tbl;
+ u32 rx_bd_qs_tbl_offset;
+ /* BDs specific */
+ u8 *p_tx_bd_ring;
+ u32 tx_bd_ring_offset;
+ u8 *p_rx_bd_ring;
+ u32 rx_bd_ring_offset;
+ u8 *p_rx_buf;
+ u32 rx_buf_offset;
+ volatile qe_bd_t *txBd;
+ volatile qe_bd_t *rxBd;
+ /* Status */
+ int mac_tx_enabled;
+ int mac_rx_enabled;
+ int grace_stopped_tx;
+ int grace_stopped_rx;
+ int the_first_run;
+ /* PHY specific */
+ struct uec_mii_info *mii_info;
+ int oldspeed;
+ int oldduplex;
+ int oldlink;
+} uec_private_t;
+
+#endif /* __UEC_H__ */
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
new file mode 100644
index 0000000..76fd388
--- /dev/null
+++ b/drivers/qe/uec_phy.c
@@ -0,0 +1,607 @@
+/*
+ * Copyright (C) 2005 Freescale Semiconductor, Inc.
+ *
+ * Author: Shlomi Gridish
+ *
+ * Description: UCC GETH Driver -- PHY handling
+ * Driver for UEC on QE
+ * Based on 8260_io/fcc_enet.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include "common.h"
+#include "net.h"
+#include "malloc.h"
+#include "asm/errno.h"
+#include "asm/immap_qe.h"
+#include "asm/io.h"
+#include "qe.h"
+#include "uccf.h"
+#include "uec.h"
+#include "uec_phy.h"
+#include "miiphy.h"
+
+#if defined(CONFIG_QE)
+
+#define UEC_VERBOSE_DEBUG
+#define ugphy_printk(format, arg...) \
+ printf(format "\n", ## arg)
+
+#define ugphy_dbg(format, arg...) \
+ ugphy_printk(format , ## arg)
+#define ugphy_err(format, arg...) \
+ ugphy_printk(format , ## arg)
+#define ugphy_info(format, arg...) \
+ ugphy_printk(format , ## arg)
+#define ugphy_warn(format, arg...) \
+ ugphy_printk(format , ## arg)
+
+#ifdef UEC_VERBOSE_DEBUG
+#define ugphy_vdbg ugphy_dbg
+#else
+#define ugphy_vdbg(ugeth, fmt, args...) do { } while (0)
+#endif /* UEC_VERBOSE_DEBUG */
+
+static void config_genmii_advert (struct uec_mii_info *mii_info);
+static void genmii_setup_forced (struct uec_mii_info *mii_info);
+static void genmii_restart_aneg (struct uec_mii_info *mii_info);
+static int gbit_config_aneg (struct uec_mii_info *mii_info);
+static int genmii_config_aneg (struct uec_mii_info *mii_info);
+static int genmii_update_link (struct uec_mii_info *mii_info);
+static int genmii_read_status (struct uec_mii_info *mii_info);
+u16 phy_read (struct uec_mii_info *mii_info, u16 regnum);
+void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val);
+
+/* Write value to the PHY for this device to the register at regnum, */
+/* waiting until the write is done before it returns. All PHY */
+/* configuration has to be done through the TSEC1 MIIM regs */
+void write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int value)
+{
+ uec_private_t *ugeth = (uec_private_t *) dev->priv;
+ uec_t *ug_regs;
+ enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum;
+ u32 tmp_reg;
+
+ ug_regs = ugeth->uec_regs;
+
+ /* Stop the MII management read cycle */
+ out_be32 (&ug_regs->miimcom, 0);
+ /* Setting up the MII Mangement Address Register */
+ tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg;
+ out_be32 (&ug_regs->miimadd, tmp_reg);
+
+ /* Setting up the MII Mangement Control Register with the value */
+ out_be32 (&ug_regs->miimcon, (u32) value);
+
+ /* Wait till MII management write is complete */
+ while ((in_be32 (&ug_regs->miimind)) & MIIMIND_BUSY);
+
+ udelay (100000);
+}
+
+/* Reads from register regnum in the PHY for device dev, */
+/* returning the value. Clears miimcom first. All PHY */
+/* configuration has to be done through the TSEC1 MIIM regs */
+int read_phy_reg (struct eth_device *dev, int mii_id, int regnum)
+{
+ uec_private_t *ugeth = (uec_private_t *) dev->priv;
+ uec_t *ug_regs;
+ enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum;
+ u32 tmp_reg;
+ u16 value;
+
+ ug_regs = ugeth->uec_regs;
+
+ /* Setting up the MII Mangement Address Register */
+ tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg;
+ out_be32 (&ug_regs->miimadd, tmp_reg);
+
+ /* Perform an MII management read cycle */
+ out_be32 (&ug_regs->miimcom, 0);
+ out_be32 (&ug_regs->miimcom, MIIMCOM_READ_CYCLE);
+
+ /* Wait till MII management write is complete */
+ while ((in_be32 (&ug_regs->miimind)) &
+ (MIIMIND_NOT_VALID | MIIMIND_BUSY));
+
+ udelay (100000);
+
+ /* Read MII management status */
+ value = (u16) in_be32 (&ug_regs->miimstat);
+ if (value == 0xffff)
+ ugphy_warn
+ ("read wrong value : mii_id %d,mii_reg %d, base %08x",
+ mii_id, mii_reg, (u32) & (ug_regs->miimcfg));
+
+ return (value);
+}
+
+void mii_clear_phy_interrupt (struct uec_mii_info *mii_info)
+{
+ if (mii_info->phyinfo->ack_interrupt)
+ mii_info->phyinfo->ack_interrupt (mii_info);
+}
+
+void mii_configure_phy_interrupt (struct uec_mii_info *mii_info,
+ u32 interrupts)
+{
+ mii_info->interrupts = interrupts;
+ if (mii_info->phyinfo->config_intr)
+ mii_info->phyinfo->config_intr (mii_info);
+}
+
+/* Writes MII_ADVERTISE with the appropriate values, after
+ * sanitizing advertise to make sure only supported features
+ * are advertised
+ */
+static void config_genmii_advert (struct uec_mii_info *mii_info)
+{
+ u32 advertise;
+ u16 adv;
+
+ /* Only allow advertising what this PHY supports */
+ mii_info->advertising &= mii_info->phyinfo->features;
+ advertise = mii_info->advertising;
+
+ /* Setup standard advertisement */
+ adv = phy_read (mii_info, PHY_ANAR);
+ adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
+ if (advertise & ADVERTISED_10baseT_Half)
+ adv |= ADVERTISE_10HALF;
+ if (advertise & ADVERTISED_10baseT_Full)
+ adv |= ADVERTISE_10FULL;
+ if (advertise & ADVERTISED_100baseT_Half)
+ adv |= ADVERTISE_100HALF;
+ if (advertise & ADVERTISED_100baseT_Full)
+ adv |= ADVERTISE_100FULL;
+ phy_write (mii_info, PHY_ANAR, adv);
+}
+
+static void genmii_setup_forced (struct uec_mii_info *mii_info)
+{
+ u16 ctrl;
+ u32 features = mii_info->phyinfo->features;
+
+ ctrl = phy_read (mii_info, PHY_BMCR);
+
+ ctrl &= ~(PHY_BMCR_DPLX | PHY_BMCR_100_MBPS |
+ PHY_BMCR_1000_MBPS | PHY_BMCR_AUTON);
+ ctrl |= PHY_BMCR_RESET;
+
+ switch (mii_info->speed) {
+ case SPEED_1000:
+ if (features & (SUPPORTED_1000baseT_Half
+ | SUPPORTED_1000baseT_Full)) {
+ ctrl |= PHY_BMCR_1000_MBPS;
+ break;
+ }
+ mii_info->speed = SPEED_100;
+ case SPEED_100:
+ if (features & (SUPPORTED_100baseT_Half
+ | SUPPORTED_100baseT_Full)) {
+ ctrl |= PHY_BMCR_100_MBPS;
+ break;
+ }
+ mii_info->speed = SPEED_10;
+ case SPEED_10:
+ if (features & (SUPPORTED_10baseT_Half
+ | SUPPORTED_10baseT_Full))
+ break;
+ default: /* Unsupported speed! */
+ ugphy_err ("%s: Bad speed!", mii_info->dev->name);
+ break;
+ }
+
+ phy_write (mii_info, PHY_BMCR, ctrl);
+}
+
+/* Enable and Restart Autonegotiation */
+static void genmii_restart_aneg (struct uec_mii_info *mii_info)
+{
+ u16 ctl;
+
+ ctl = phy_read (mii_info, PHY_BMCR);
+ ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+ phy_write (mii_info, PHY_BMCR, ctl);
+}
+
+static int gbit_config_aneg (struct uec_mii_info *mii_info)
+{
+ u16 adv;
+ u32 advertise;
+
+ if (mii_info->autoneg) {
+ /* Configure the ADVERTISE register */
+ config_genmii_advert (mii_info);
+ advertise = mii_info->advertising;
+
+ adv = phy_read (mii_info, MII_1000BASETCONTROL);
+ adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP |
+ MII_1000BASETCONTROL_HALFDUPLEXCAP);
+ if (advertise & SUPPORTED_1000baseT_Half)
+ adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP;
+ if (advertise & SUPPORTED_1000baseT_Full)
+ adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP;
+ phy_write (mii_info, MII_1000BASETCONTROL, adv);
+
+ /* Start/Restart aneg */
+ genmii_restart_aneg (mii_info);
+ } else
+ genmii_setup_forced (mii_info);
+
+ return 0;
+}
+
+static int marvell_config_aneg (struct uec_mii_info *mii_info)
+{
+ /* The Marvell PHY has an errata which requires
+ * that certain registers get written in order
+ * to restart autonegotiation */
+ phy_write (mii_info, PHY_BMCR, PHY_BMCR_RESET);
+
+ phy_write (mii_info, 0x1d, 0x1f);
+ phy_write (mii_info, 0x1e, 0x200c);
+ phy_write (mii_info, 0x1d, 0x5);
+ phy_write (mii_info, 0x1e, 0);
+ phy_write (mii_info, 0x1e, 0x100);
+
+ gbit_config_aneg (mii_info);
+
+ return 0;
+}
+
+static int genmii_config_aneg (struct uec_mii_info *mii_info)
+{
+ if (mii_info->autoneg) {
+ config_genmii_advert (mii_info);
+ genmii_restart_aneg (mii_info);
+ } else
+ genmii_setup_forced (mii_info);
+
+ return 0;
+}
+
+static int genmii_update_link (struct uec_mii_info *mii_info)
+{
+ u16 status;
+
+ /* Do a fake read */
+ phy_read (mii_info, PHY_BMSR);
+
+ /* Read link and autonegotiation status */
+ status = phy_read (mii_info, PHY_BMSR);
+ if ((status & PHY_BMSR_LS) == 0)
+ mii_info->link = 0;
+ else
+ mii_info->link = 1;
+
+ /* If we are autonegotiating, and not done,
+ * return an error */
+ if (mii_info->autoneg && !(status & PHY_BMSR_AUTN_COMP))
+ return -EAGAIN;
+
+ return 0;
+}
+
+static int genmii_read_status (struct uec_mii_info *mii_info)
+{
+ u16 status;
+ int err;
+
+ /* Update the link, but return if there
+ * was an error */
+ err = genmii_update_link (mii_info);
+ if (err)
+ return err;
+
+ if (mii_info->autoneg) {
+ status = phy_read (mii_info, PHY_ANLPAR);
+
+ if (status & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD))
+ mii_info->duplex = DUPLEX_FULL;
+ else
+ mii_info->duplex = DUPLEX_HALF;
+ if (status & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX))
+ mii_info->speed = SPEED_100;
+ else
+ mii_info->speed = SPEED_10;
+ mii_info->pause = 0;
+ }
+ /* On non-aneg, we assume what we put in BMCR is the speed,
+ * though magic-aneg shouldn't prevent this case from occurring
+ */
+
+ return 0;
+}
+
+static int marvell_read_status (struct uec_mii_info *mii_info)
+{
+ u16 status;
+ int err;
+
+ /* Update the link, but return if there
+ * was an error */
+ err = genmii_update_link (mii_info);
+ if (err)
+ return err;
+
+ /* If the link is up, read the speed and duplex */
+ /* If we aren't autonegotiating, assume speeds
+ * are as set */
+ if (mii_info->autoneg && mii_info->link) {
+ int speed;
+
+ status = phy_read (mii_info, MII_M1011_PHY_SPEC_STATUS);
+
+ /* Get the duplexity */
+ if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX)
+ mii_info->duplex = DUPLEX_FULL;
+ else
+ mii_info->duplex = DUPLEX_HALF;
+
+ /* Get the speed */
+ speed = status & MII_M1011_PHY_SPEC_STATUS_SPD_MASK;
+ switch (speed) {
+ case MII_M1011_PHY_SPEC_STATUS_1000:
+ mii_info->speed = SPEED_1000;
+ break;
+ case MII_M1011_PHY_SPEC_STATUS_100:
+ mii_info->speed = SPEED_100;
+ break;
+ default:
+ mii_info->speed = SPEED_10;
+ break;
+ }
+ mii_info->pause = 0;
+ }
+
+ return 0;
+}
+
+static int marvell_ack_interrupt (struct uec_mii_info *mii_info)
+{
+ /* Clear the interrupts by reading the reg */
+ phy_read (mii_info, MII_M1011_IEVENT);
+
+ return 0;
+}
+
+static int marvell_config_intr (struct uec_mii_info *mii_info)
+{
+ if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
+ phy_write (mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
+ else
+ phy_write (mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
+
+ return 0;
+}
+
+static int dm9161_init (struct uec_mii_info *mii_info)
+{
+ /* Reset the PHY */
+ phy_write (mii_info, PHY_BMCR, phy_read (mii_info, PHY_BMCR) |
+ PHY_BMCR_RESET);
+ /* PHY and MAC connect */
+ phy_write (mii_info, PHY_BMCR, phy_read (mii_info, PHY_BMCR) &
+ ~PHY_BMCR_ISO);
+#ifdef CONFIG_RMII_MODE
+ phy_write (mii_info, MII_DM9161_SCR, MII_DM9161_SCR_RMII_INIT);
+#else
+ phy_write (mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
+#endif
+ config_genmii_advert (mii_info);
+ /* Start/restart aneg */
+ genmii_config_aneg (mii_info);
+ /* Delay to wait the aneg compeleted */
+ udelay (3000000);
+
+ return 0;
+}
+
+static int dm9161_config_aneg (struct uec_mii_info *mii_info)
+{
+ return 0;
+}
+
+static int dm9161_read_status (struct uec_mii_info *mii_info)
+{
+ u16 status;
+ int err;
+
+ /* Update the link, but return if there was an error */
+ err = genmii_update_link (mii_info);
+ if (err)
+ return err;
+ /* If the link is up, read the speed and duplex
+ If we aren't autonegotiating assume speeds are as set */
+ if (mii_info->autoneg && mii_info->link) {
+ status = phy_read (mii_info, MII_DM9161_SCSR);
+ if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H))
+ mii_info->speed = SPEED_100;
+ else
+ mii_info->speed = SPEED_10;
+
+ if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_10F))
+ mii_info->duplex = DUPLEX_FULL;
+ else
+ mii_info->duplex = DUPLEX_HALF;
+ }
+
+ return 0;
+}
+
+static int dm9161_ack_interrupt (struct uec_mii_info *mii_info)
+{
+ /* Clear the interrupt by reading the reg */
+ phy_read (mii_info, MII_DM9161_INTR);
+
+ return 0;
+}
+
+static int dm9161_config_intr (struct uec_mii_info *mii_info)
+{
+ if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
+ phy_write (mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT);
+ else
+ phy_write (mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP);
+
+ return 0;
+}
+
+static void dm9161_close (struct uec_mii_info *mii_info)
+{
+}
+
+static struct phy_info phy_info_dm9161 = {
+ .phy_id = 0x0181b880,
+ .phy_id_mask = 0x0ffffff0,
+ .name = "Davicom DM9161E",
+ .init = dm9161_init,
+ .config_aneg = dm9161_config_aneg,
+ .read_status = dm9161_read_status,
+ .close = dm9161_close,
+};
+
+static struct phy_info phy_info_dm9161a = {
+ .phy_id = 0x0181b8a0,
+ .phy_id_mask = 0x0ffffff0,
+ .name = "Davicom DM9161A",
+ .features = MII_BASIC_FEATURES,
+ .init = dm9161_init,
+ .config_aneg = dm9161_config_aneg,
+ .read_status = dm9161_read_status,
+ .ack_interrupt = dm9161_ack_interrupt,
+ .config_intr = dm9161_config_intr,
+ .close = dm9161_close,
+};
+
+static struct phy_info phy_info_marvell = {
+ .phy_id = 0x01410c00,
+ .phy_id_mask = 0xffffff00,
+ .name = "Marvell 88E11x1",
+ .features = MII_GBIT_FEATURES,
+ .config_aneg = &marvell_config_aneg,
+ .read_status = &marvell_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+};
+
+static struct phy_info phy_info_genmii = {
+ .phy_id = 0x00000000,
+ .phy_id_mask = 0x00000000,
+ .name = "Generic MII",
+ .features = MII_BASIC_FEATURES,
+ .config_aneg = genmii_config_aneg,
+ .read_status = genmii_read_status,
+};
+
+static struct phy_info *phy_info[] = {
+ &phy_info_dm9161,
+ &phy_info_dm9161a,
+ &phy_info_marvell,
+ &phy_info_genmii,
+ NULL
+};
+
+u16 phy_read (struct uec_mii_info *mii_info, u16 regnum)
+{
+ return mii_info->mdio_read (mii_info->dev, mii_info->mii_id, regnum);
+}
+
+void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val)
+{
+ mii_info->mdio_write (mii_info->dev, mii_info->mii_id, regnum, val);
+}
+
+/* Use the PHY ID registers to determine what type of PHY is attached
+ * to device dev. return a struct phy_info structure describing that PHY
+ */
+struct phy_info *get_phy_info (struct uec_mii_info *mii_info)
+{
+ u16 phy_reg;
+ u32 phy_ID;
+ int i;
+ struct phy_info *theInfo = NULL;
+
+ /* Grab the bits from PHYIR1, and put them in the upper half */
+ phy_reg = phy_read (mii_info, PHY_PHYIDR1);
+ phy_ID = (phy_reg & 0xffff) << 16;
+
+ /* Grab the bits from PHYIR2, and put them in the lower half */
+ phy_reg = phy_read (mii_info, PHY_PHYIDR2);
+ phy_ID |= (phy_reg & 0xffff);
+
+ /* loop through all the known PHY types, and find one that */
+ /* matches the ID we read from the PHY. */
+ for (i = 0; phy_info[i]; i++)
+ if (phy_info[i]->phy_id ==
+ (phy_ID & phy_info[i]->phy_id_mask)) {
+ theInfo = phy_info[i];
+ break;
+ }
+
+ /* This shouldn't happen, as we have generic PHY support */
+ if (theInfo == NULL) {
+ ugphy_info ("UEC: PHY id %x is not supported!", phy_ID);
+ return NULL;
+ } else {
+ ugphy_info ("UEC: PHY is %s (%x)", theInfo->name, phy_ID);
+ }
+
+ return theInfo;
+}
+
+void marvell_phy_interface_mode (struct eth_device *dev,
+ enet_interface_e mode)
+{
+ uec_private_t *uec = (uec_private_t *) dev->priv;
+ struct uec_mii_info *mii_info;
+
+ if (!uec->mii_info) {
+ printf ("%s: the PHY not intialized\n", __FUNCTION__);
+ return;
+ }
+ mii_info = uec->mii_info;
+
+ if (mode == ENET_100_RGMII) {
+ phy_write (mii_info, 0x00, 0x9140);
+ phy_write (mii_info, 0x1d, 0x001f);
+ phy_write (mii_info, 0x1e, 0x200c);
+ phy_write (mii_info, 0x1d, 0x0005);
+ phy_write (mii_info, 0x1e, 0x0000);
+ phy_write (mii_info, 0x1e, 0x0100);
+ phy_write (mii_info, 0x09, 0x0e00);
+ phy_write (mii_info, 0x04, 0x01e1);
+ phy_write (mii_info, 0x00, 0x9140);
+ phy_write (mii_info, 0x00, 0x1000);
+ udelay (100000);
+ phy_write (mii_info, 0x00, 0x2900);
+ phy_write (mii_info, 0x14, 0x0cd2);
+ phy_write (mii_info, 0x00, 0xa100);
+ phy_write (mii_info, 0x09, 0x0000);
+ phy_write (mii_info, 0x1b, 0x800b);
+ phy_write (mii_info, 0x04, 0x05e1);
+ phy_write (mii_info, 0x00, 0xa100);
+ phy_write (mii_info, 0x00, 0x2100);
+ udelay (1000000);
+ } else if (mode == ENET_10_RGMII) {
+ phy_write (mii_info, 0x14, 0x8e40);
+ phy_write (mii_info, 0x1b, 0x800b);
+ phy_write (mii_info, 0x14, 0x0c82);
+ phy_write (mii_info, 0x00, 0x8100);
+ udelay (1000000);
+ }
+}
+
+void change_phy_interface_mode (struct eth_device *dev, enet_interface_e mode)
+{
+#ifdef CONFIG_PHY_MODE_NEED_CHANGE
+ marvell_phy_interface_mode (dev, mode);
+#endif
+}
+#endif /* CONFIG_QE */
diff --git a/drivers/qe/uec_phy.h b/drivers/qe/uec_phy.h
new file mode 100644
index 0000000..9bd926d
--- /dev/null
+++ b/drivers/qe/uec_phy.h
@@ -0,0 +1,259 @@
+/*
+ * Copyright (C) 2005 Freescale Semiconductor, Inc.
+ *
+ * Author: Shlomi Gridish <gridish@freescale.com>
+ *
+ * Description: UCC ethernet driver -- PHY handling
+ * Driver for UEC on QE
+ * Based on 8260_io/fcc_enet.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#ifndef __UEC_PHY_H__
+#define __UEC_PHY_H__
+
+#define MII_end ((u32)-2)
+#define MII_read ((u32)-1)
+
+#define MIIMIND_BUSY 0x00000001
+#define MIIMIND_NOTVALID 0x00000004
+
+#define UGETH_AN_TIMEOUT 2000
+
+/* 1000BT control (Marvell & BCM54xx at least) */
+#define MII_1000BASETCONTROL 0x09
+#define MII_1000BASETCONTROL_FULLDUPLEXCAP 0x0200
+#define MII_1000BASETCONTROL_HALFDUPLEXCAP 0x0100
+
+/* Cicada Extended Control Register 1 */
+#define MII_CIS8201_EXT_CON1 0x17
+#define MII_CIS8201_EXTCON1_INIT 0x0000
+
+/* Cicada Interrupt Mask Register */
+#define MII_CIS8201_IMASK 0x19
+#define MII_CIS8201_IMASK_IEN 0x8000
+#define MII_CIS8201_IMASK_SPEED 0x4000
+#define MII_CIS8201_IMASK_LINK 0x2000
+#define MII_CIS8201_IMASK_DUPLEX 0x1000
+#define MII_CIS8201_IMASK_MASK 0xf000
+
+/* Cicada Interrupt Status Register */
+#define MII_CIS8201_ISTAT 0x1a
+#define MII_CIS8201_ISTAT_STATUS 0x8000
+#define MII_CIS8201_ISTAT_SPEED 0x4000
+#define MII_CIS8201_ISTAT_LINK 0x2000
+#define MII_CIS8201_ISTAT_DUPLEX 0x1000
+
+/* Cicada Auxiliary Control/Status Register */
+#define MII_CIS8201_AUX_CONSTAT 0x1c
+#define MII_CIS8201_AUXCONSTAT_INIT 0x0004
+#define MII_CIS8201_AUXCONSTAT_DUPLEX 0x0020
+#define MII_CIS8201_AUXCONSTAT_SPEED 0x0018
+#define MII_CIS8201_AUXCONSTAT_GBIT 0x0010
+#define MII_CIS8201_AUXCONSTAT_100 0x0008
+
+/* 88E1011 PHY Status Register */
+#define MII_M1011_PHY_SPEC_STATUS 0x11
+#define MII_M1011_PHY_SPEC_STATUS_1000 0x8000
+#define MII_M1011_PHY_SPEC_STATUS_100 0x4000
+#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK 0xc000
+#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX 0x2000
+#define MII_M1011_PHY_SPEC_STATUS_RESOLVED 0x0800
+#define MII_M1011_PHY_SPEC_STATUS_LINK 0x0400
+
+#define MII_M1011_IEVENT 0x13
+#define MII_M1011_IEVENT_CLEAR 0x0000
+
+#define MII_M1011_IMASK 0x12
+#define MII_M1011_IMASK_INIT 0x6400
+#define MII_M1011_IMASK_CLEAR 0x0000
+
+#define MII_DM9161_SCR 0x10
+#define MII_DM9161_SCR_INIT 0x0610
+#define MII_DM9161_SCR_RMII_INIT 0x0710
+
+/* DM9161 Specified Configuration and Status Register */
+#define MII_DM9161_SCSR 0x11
+#define MII_DM9161_SCSR_100F 0x8000
+#define MII_DM9161_SCSR_100H 0x4000
+#define MII_DM9161_SCSR_10F 0x2000
+#define MII_DM9161_SCSR_10H 0x1000
+
+/* DM9161 Interrupt Register */
+#define MII_DM9161_INTR 0x15
+#define MII_DM9161_INTR_PEND 0x8000
+#define MII_DM9161_INTR_DPLX_MASK 0x0800
+#define MII_DM9161_INTR_SPD_MASK 0x0400
+#define MII_DM9161_INTR_LINK_MASK 0x0200
+#define MII_DM9161_INTR_MASK 0x0100
+#define MII_DM9161_INTR_DPLX_CHANGE 0x0010
+#define MII_DM9161_INTR_SPD_CHANGE 0x0008
+#define MII_DM9161_INTR_LINK_CHANGE 0x0004
+#define MII_DM9161_INTR_INIT 0x0000
+#define MII_DM9161_INTR_STOP \
+(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \
+ | MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK)
+
+/* DM9161 10BT Configuration/Status */
+#define MII_DM9161_10BTCSR 0x12
+#define MII_DM9161_10BTCSR_INIT 0x7800
+
+#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | \
+ SUPPORTED_10baseT_Full | \
+ SUPPORTED_100baseT_Half | \
+ SUPPORTED_100baseT_Full | \
+ SUPPORTED_Autoneg | \
+ SUPPORTED_TP | \
+ SUPPORTED_MII)
+
+#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \
+ SUPPORTED_1000baseT_Half | \
+ SUPPORTED_1000baseT_Full)
+
+#define MII_READ_COMMAND 0x00000001
+
+#define MII_INTERRUPT_DISABLED 0x0
+#define MII_INTERRUPT_ENABLED 0x1
+
+#define SPEED_10 10
+#define SPEED_100 100
+#define SPEED_1000 1000
+
+/* Duplex, half or full. */
+#define DUPLEX_HALF 0x00
+#define DUPLEX_FULL 0x01
+
+/* Indicates what features are supported by the interface. */
+#define SUPPORTED_10baseT_Half (1 << 0)
+#define SUPPORTED_10baseT_Full (1 << 1)
+#define SUPPORTED_100baseT_Half (1 << 2)
+#define SUPPORTED_100baseT_Full (1 << 3)
+#define SUPPORTED_1000baseT_Half (1 << 4)
+#define SUPPORTED_1000baseT_Full (1 << 5)
+#define SUPPORTED_Autoneg (1 << 6)
+#define SUPPORTED_TP (1 << 7)
+#define SUPPORTED_AUI (1 << 8)
+#define SUPPORTED_MII (1 << 9)
+#define SUPPORTED_FIBRE (1 << 10)
+#define SUPPORTED_BNC (1 << 11)
+#define SUPPORTED_10000baseT_Full (1 << 12)
+
+#define ADVERTISED_10baseT_Half (1 << 0)
+#define ADVERTISED_10baseT_Full (1 << 1)
+#define ADVERTISED_100baseT_Half (1 << 2)
+#define ADVERTISED_100baseT_Full (1 << 3)
+#define ADVERTISED_1000baseT_Half (1 << 4)
+#define ADVERTISED_1000baseT_Full (1 << 5)
+#define ADVERTISED_Autoneg (1 << 6)
+#define ADVERTISED_TP (1 << 7)
+#define ADVERTISED_AUI (1 << 8)
+#define ADVERTISED_MII (1 << 9)
+#define ADVERTISED_FIBRE (1 << 10)
+#define ADVERTISED_BNC (1 << 11)
+#define ADVERTISED_10000baseT_Full (1 << 12)
+
+/* Advertisement control register. */
+#define ADVERTISE_SLCT 0x001f /* Selector bits */
+#define ADVERTISE_CSMA 0x0001 /* Only selector supported */
+#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
+#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
+#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
+#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
+#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */
+#define ADVERTISE_RESV 0x1c00 /* Unused... */
+#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */
+#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */
+#define ADVERTISE_NPAGE 0x8000 /* Next page bit */
+
+#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
+ ADVERTISE_CSMA)
+#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
+ ADVERTISE_100HALF | ADVERTISE_100FULL)
+
+/* Taken from mii_if_info and sungem_phy.h */
+struct uec_mii_info {
+ /* Information about the PHY type */
+ /* And management functions */
+ struct phy_info *phyinfo;
+
+ struct eth_device *dev;
+
+ /* forced speed & duplex (no autoneg)
+ * partner speed & duplex & pause (autoneg)
+ */
+ int speed;
+ int duplex;
+ int pause;
+
+ /* The most recently read link state */
+ int link;
+
+ /* Enabled Interrupts */
+ u32 interrupts;
+
+ u32 advertising;
+ int autoneg;
+ int mii_id;
+
+ /* private data pointer */
+ /* For use by PHYs to maintain extra state */
+ void *priv;
+
+ /* Provided by ethernet driver */
+ int (*mdio_read) (struct eth_device * dev, int mii_id, int reg);
+ void (*mdio_write) (struct eth_device * dev, int mii_id, int reg,
+ int val);
+};
+
+/* struct phy_info: a structure which defines attributes for a PHY
+ *
+ * id will contain a number which represents the PHY. During
+ * startup, the driver will poll the PHY to find out what its
+ * UID--as defined by registers 2 and 3--is. The 32-bit result
+ * gotten from the PHY will be ANDed with phy_id_mask to
+ * discard any bits which may change based on revision numbers
+ * unimportant to functionality
+ *
+ * There are 6 commands which take a ugeth_mii_info structure.
+ * Each PHY must declare config_aneg, and read_status.
+ */
+struct phy_info {
+ u32 phy_id;
+ char *name;
+ unsigned int phy_id_mask;
+ u32 features;
+
+ /* Called to initialize the PHY */
+ int (*init) (struct uec_mii_info * mii_info);
+
+ /* Called to suspend the PHY for power */
+ int (*suspend) (struct uec_mii_info * mii_info);
+
+ /* Reconfigures autonegotiation (or disables it) */
+ int (*config_aneg) (struct uec_mii_info * mii_info);
+
+ /* Determines the negotiated speed and duplex */
+ int (*read_status) (struct uec_mii_info * mii_info);
+
+ /* Clears any pending interrupts */
+ int (*ack_interrupt) (struct uec_mii_info * mii_info);
+
+ /* Enables or disables interrupts */
+ int (*config_intr) (struct uec_mii_info * mii_info);
+
+ /* Clears up any memory if needed */
+ void (*close) (struct uec_mii_info * mii_info);
+};
+
+struct phy_info *get_phy_info (struct uec_mii_info *mii_info);
+void write_phy_reg (struct eth_device *dev, int mii_id, int regnum,
+ int value);
+int read_phy_reg (struct eth_device *dev, int mii_id, int regnum);
+void mii_clear_phy_interrupt (struct uec_mii_info *mii_info);
+void mii_configure_phy_interrupt (struct uec_mii_info *mii_info,
+ u32 interrupts);
+#endif /* __UEC_PHY_H__ */
diff --git a/drivers/tsec.c b/drivers/tsec.c
index 400e593..2524e4f 100644
--- a/drivers/tsec.c
+++ b/drivers/tsec.c
@@ -610,11 +610,10 @@
regs->maccfg2 = ((regs->maccfg2 & ~(MACCFG2_IF))
| MACCFG2_MII);
- /* If We're in reduced mode, we need
- * to say whether we're 10 or 100 MB.
+ /* Set R100 bit in all modes although
+ * it is only used in RGMII mode
*/
- if ((priv->speed == 100)
- && (priv->flags & TSEC_REDUCED))
+ if (priv->speed == 100)
regs->ecntrl |= ECNTRL_R100;
else
regs->ecntrl &= ~(ECNTRL_R100);
@@ -816,6 +815,7 @@
{0x1d, 0x5, NULL},
{0x1e, 0x0, NULL},
{0x1e, 0x100, NULL},
+ {0x14, 0x0cd2, NULL}, /* Delay RGMII TX and RX */
{MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
@@ -1110,10 +1110,8 @@
};
struct phy_info *phy_info[] = {
-#if 0
- &phy_info_cis8201,
-#endif
&phy_info_cis8204,
+ &phy_info_cis8201,
&phy_info_M88E1011S,
&phy_info_M88E1111S,
&phy_info_M88E1145,
diff --git a/drivers/tsec.h b/drivers/tsec.h
index 4aa331c..cee3003 100644
--- a/drivers/tsec.h
+++ b/drivers/tsec.h
@@ -30,7 +30,7 @@
#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
#define TSEC_BASE_ADDR (CFG_IMMR + CFG_TSEC1_OFFSET)
#elif defined(CONFIG_MPC83XX)
- #define TSEC_BASE_ADDR (CFG_IMMRBAR + CFG_TSEC1_OFFSET)
+ #define TSEC_BASE_ADDR (CFG_IMMR + CFG_TSEC1_OFFSET)
#endif
diff --git a/include/74xx_7xx.h b/include/74xx_7xx.h
index a628798..33e396a 100644
--- a/include/74xx_7xx.h
+++ b/include/74xx_7xx.h
@@ -111,6 +111,7 @@
CPU_750CX, CPU_750FX, CPU_750GX,
CPU_7400,
CPU_7410,
+ CPU_7448,
CPU_7450, CPU_7455, CPU_7457,
CPU_UNKNOWN} cpu_t;
diff --git a/include/ACEX1K.h b/include/ACEX1K.h
index f75c463..f249d64 100644
--- a/include/ACEX1K.h
+++ b/include/ACEX1K.h
@@ -35,6 +35,11 @@
extern int ACEX1K_info( Altera_desc *desc );
extern int ACEX1K_reloc( Altera_desc *desc, ulong reloc_off );
+extern int CYC2_load( Altera_desc *desc, void *image, size_t size );
+extern int CYC2_dump( Altera_desc *desc, void *buf, size_t bsize );
+extern int CYC2_info( Altera_desc *desc );
+extern int CYC2_reloc( Altera_desc *desc, ulong reloc_off );
+
/* Slave Serial Implementation function table */
typedef struct {
Altera_pre_fn pre;
@@ -48,6 +53,18 @@
int relocated;
} Altera_ACEX1K_Passive_Serial_fns;
+/* Slave Serial Implementation function table */
+typedef struct {
+ Altera_pre_fn pre;
+ Altera_config_fn config;
+ Altera_status_fn status;
+ Altera_done_fn done;
+ Altera_write_fn write;
+ Altera_abort_fn abort;
+ Altera_post_fn post;
+ int relocated;
+} Altera_CYC2_Passive_Serial_fns;
+
/* Device Image Sizes
*********************************************************************/
/* ACEX1K */
@@ -60,6 +77,8 @@
#endif
#define Altera_EP1K100_SIZE (166965*8)
+#define Altera_EP2C35_SIZE 883905
+
/* Descriptor Macros
*********************************************************************/
/* ACEX1K devices */
diff --git a/include/altera.h b/include/altera.h
index 74b6729..7b8cb4a 100644
--- a/include/altera.h
+++ b/include/altera.h
@@ -34,8 +34,10 @@
/* Altera Model definitions
*********************************************************************/
#define CFG_ACEX1K CFG_FPGA_DEV( 0x1 )
+#define CFG_CYCLON2 CFG_FPGA_DEV( 0x2 )
#define CFG_ALTERA_ACEX1K (CFG_FPGA_ALTERA | CFG_ACEX1K)
+#define CFG_ALTERA_CYCLON2 (CFG_FPGA_ALTERA | CFG_CYCLON2)
/* Add new models here */
/* Altera Interface definitions
@@ -56,6 +58,7 @@
typedef enum { /* typedef Altera_Family */
min_altera_type, /* insert all new types after this */
Altera_ACEX1K, /* ACEX1K Family */
+ Altera_CYC2, /* CYCLONII Family */
/* Add new models here */
max_altera_type /* insert all new types before this */
} Altera_Family; /* end, typedef Altera_Family */
@@ -84,6 +87,7 @@
typedef int (*Altera_done_fn)( int cookie );
typedef int (*Altera_clk_fn)( int assert_clk, int flush, int cookie );
typedef int (*Altera_data_fn)( int assert_data, int flush, int cookie );
+typedef int (*Altera_write_fn)(void *buf, size_t len, int flush, int cookie);
typedef int (*Altera_abort_fn)( int cookie );
typedef int (*Altera_post_fn)( int cookie );
diff --git a/include/asm-ppc/e300.h b/include/asm-ppc/e300.h
index 908007c..79dcae4 100644
--- a/include/asm-ppc/e300.h
+++ b/include/asm-ppc/e300.h
@@ -12,6 +12,8 @@
#define PVR_83xx 0x80830000
#define PVR_8349_REV10 (PVR_83xx | 0x0010)
#define PVR_8349_REV11 (PVR_83xx | 0x0011)
+#define PVR_8360_REV10 (PVR_83xx | 0x0020)
+#define PVR_8360_REV11 (PVR_83xx | 0x0020)
/*
* Hardware Implementation-Dependent Register 0 (HID0)
diff --git a/include/asm-ppc/fsl_i2c.h b/include/asm-ppc/fsl_i2c.h
index 76b1c43..4f71341 100644
--- a/include/asm-ppc/fsl_i2c.h
+++ b/include/asm-ppc/fsl_i2c.h
@@ -83,8 +83,4 @@
u8 res6[0xE8];
} fsl_i2c_t;
-
-#define I2C_READ 1
-#define I2C_WRITE 0
-
#endif /* _ASM_I2C_H_ */
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index b73af96..8bc61b6 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -52,17 +52,29 @@
#if defined(CONFIG_MPC83XX)
/* There are other clocks in the MPC83XX */
u32 csb_clk;
+#if defined (CONFIG_MPC8349)
u32 tsec1_clk;
u32 tsec2_clk;
- u32 core_clk;
u32 usbmph_clk;
u32 usbdr_clk;
- u32 i2c_clk;
+#endif /* CONFIG_MPC8349 */
+ u32 core_clk;
+ u32 i2c1_clk;
+ u32 i2c2_clk;
u32 enc_clk;
u32 lbiu_clk;
u32 lclk_clk;
u32 ddr_clk;
u32 pci_clk;
+#if defined(CONFIG_QE)
+ u32 qe_clk;
+ u32 brg_clk;
+ uint mp_alloc_base;
+ uint mp_alloc_top;
+#endif /* CONFIG_QE */
+#if defined (CONFIG_MPC8360)
+ u32 ddr_sec_clk;
+#endif /* CONFIG_MPC8360 */
#endif
#if defined(CONFIG_MPC5xxx)
unsigned long ipb_clk;
diff --git a/include/asm-ppc/i2c.h b/include/asm-ppc/i2c.h
deleted file mode 100644
index 1680d3a..0000000
--- a/include/asm-ppc/i2c.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Freescale I2C Controller
- *
- * This software may be used and distributed according to the
- * terms of the GNU Public License, Version 2, incorporated
- * herein by reference.
- *
- * Copyright 2004 Freescale Semiconductor.
- * (C) Copyright 2003, Motorola, Inc.
- * author: Eran Liberty (liberty@freescale.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _ASM_I2C_H_
-#define _ASM_I2C_H_
-
-#include <asm/types.h>
-
-typedef struct i2c
-{
- u8 adr; /**< I2C slave address */
-#define I2C_ADR 0xFE
-#define I2C_ADR_SHIFT 1
-#define I2C_ADR_RES ~(I2C_ADR)
- u8 res0[3];
- u8 fdr; /**< I2C frequency divider register */
-#define IC2_FDR 0x3F
-#define IC2_FDR_SHIFT 0
-#define IC2_FDR_RES ~(IC2_FDR)
- u8 res1[3];
- u8 cr; /**< I2C control redister */
-#define I2C_CR_MEN 0x80
-#define I2C_CR_MIEN 0x40
-#define I2C_CR_MSTA 0x20
-#define I2C_CR_MTX 0x10
-#define I2C_CR_TXAK 0x08
-#define I2C_CR_RSTA 0x04
-#define I2C_CR_BCST 0x01
- u8 res2[3];
- u8 sr; /**< I2C status register */
-#define I2C_SR_MCF 0x80
-#define I2C_SR_MAAS 0x40
-#define I2C_SR_MBB 0x20
-#define I2C_SR_MAL 0x10
-#define I2C_SR_BCSTM 0x08
-#define I2C_SR_SRW 0x04
-#define I2C_SR_MIF 0x02
-#define I2C_SR_RXAK 0x01
- u8 res3[3];
- u8 dr; /**< I2C data register */
-#define I2C_DR 0xFF
-#define I2C_DR_SHIFT 0
-#define I2C_DR_RES ~(I2C_DR)
- u8 res4[3];
- u8 dfsrr; /**< I2C digital filter sampling rate register */
-#define I2C_DFSRR 0x3F
-#define I2C_DFSRR_SHIFT 0
-#define I2C_DFSRR_RES ~(I2C_DR)
- u8 res5[3];
- u8 res6[0xE8];
-} i2c_t;
-
-#ifndef CFG_HZ
-#error CFG_HZ is not defined in /include/configs/${BOARD}.h
-#endif
-#define I2C_TIMEOUT (CFG_HZ/4)
-
-#ifndef CFG_IMMRBAR
-#error CFG_IMMRBAR is not defined in /include/configs/${BOARD}.h
-#endif
-
-#ifndef CFG_I2C_OFFSET
-#error CFG_I2C_OFFSET is not defined in /include/configs/${BOARD}.h
-#endif
-
-#if defined(CONFIG_MPC8349EMDS) || defined(CONFIG_TQM834X)
-/*
- * MPC8349 have two i2c bus
- */
-extern i2c_t * mpc8349_i2c;
-#define I2C mpc8349_i2c
-#else
-#define I2C ((i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET))
-#endif
-
-#define I2C_READ 1
-#define I2C_WRITE 0
-
-#endif /* _ASM_I2C_H_ */
diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h
index c2b4c5c..43cde5e 100644
--- a/include/asm-ppc/immap_83xx.h
+++ b/include/asm-ppc/immap_83xx.h
@@ -1,75 +1,116 @@
/*
- * MPC8349 Internal Memory Map
- * Copyright (c) 2004 Freescale Semiconductor.
- * Eran Liberty (liberty@freescale.com)
+ * (C) Copyright 2004-2006 Freescale Semiconductor, Inc.
*
- * based on:
- * - MPC8260 Internal Memory Map
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
- * - MPC85xx Internal Memory Map
- * Copyright(c) 2002,2003 Motorola Inc.
- * Xianghua Xiao (x.xiao@motorola.com)
+ * MPC83xx Internal Memory Map
+ *
+ * History :
+ * 20060601: Daveliu (daveliu@freescale.com)
+ * TanyaJiang (tanya.jiang@freescale.com)
+ * Unified variable names for mpc83xx
+ * 2005 : Mandy Lavi (mandy.lavi@freescale.com)
+ * support for mpc8360e
+ * 2004 : Eran Liberty (liberty@freescale.com)
+ * Initialized for mpc8349
+ * based on:
+ * MPC8260 Internal Memory Map
+ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
+ * MPC85xx Internal Memory Map
+ * Copyright(c) 2002,2003 Motorola Inc.
+ * Xianghua Xiao (x.xiao@motorola.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
*/
-#ifndef __IMMAP_8349__
-#define __IMMAP_8349__
+#ifndef __IMMAP_83xx__
+#define __IMMAP_83xx__
+#include <config.h>
#include <asm/types.h>
-#include <asm/i2c.h>
+#include <asm/fsl_i2c.h>
/*
* Local Access Window.
*/
-typedef struct law8349 {
- u32 bar; /* LBIU local access window base address register */
+typedef struct law83xx {
+ u32 bar; /* LBIU local access window base address register */
/* Identifies the 20 most-significant address bits of the base of local
* access window n. The specified base address should be aligned to the
* window size, as defined by LBLAWARn[SIZE].
*/
-#define LAWBAR_BAR 0xFFFFF000
+#define LAWBAR_BAR 0xFFFFF000
#define LAWBAR_RES ~(LAWBAR_BAR)
- u32 ar; /* LBIU local access window attribute register */
-} law8349_t;
+ u32 ar; /* LBIU local access window attribute register */
+} law83xx_t;
/*
* System configuration registers.
*/
-typedef struct sysconf8349 {
- u32 immrbar; /* Internal memory map base address register */
+typedef struct sysconf83xx {
+ u32 immrbar; /* Internal memory map base address register */
u8 res0[0x04];
- u32 altcbar; /* Alternate configuration base address register */
+ u32 altcbar; /* Alternate configuration base address register */
/* Identifies the12 most significant address bits of an alternate base
* address used for boot sequencer configuration accesses.
*/
#define ALTCBAR_BASE_ADDR 0xFFF00000
-#define ALTCBAR_RES ~(ALTCBAR_BASE_ADDR) /* Reserved. Write has no effect, read returns 0. */
+#define ALTCBAR_RES ~(ALTCBAR_BASE_ADDR) /* Reserved. Write has no effect, read returns 0. */
u8 res1[0x14];
- law8349_t lblaw[4]; /* LBIU local access window */
+ law83xx_t lblaw[4]; /* LBIU local access window */
u8 res2[0x20];
- law8349_t pcilaw[2]; /* PCI local access window */
+ law83xx_t pcilaw[2]; /* PCI local access window */
u8 res3[0x30];
- law8349_t ddrlaw[2]; /* DDR local access window */
+ law83xx_t ddrlaw[2]; /* DDR local access window */
u8 res4[0x50];
- u32 sgprl; /* System General Purpose Register Low */
- u32 sgprh; /* System General Purpose Register High */
- u32 spridr; /* System Part and Revision ID Register */
-#define SPRIDR_PARTID 0xFFFF0000 /* Part Identification. */
-#define SPRIDR_REVID 0x0000FFFF /* Revision Identification. */
+ u32 sgprl; /* System General Purpose Register Low */
+ u32 sgprh; /* System General Purpose Register High */
+ u32 spridr; /* System Part and Revision ID Register */
+#define SPRIDR_PARTID 0xFFFF0000 /* Part Identification. */
+#define SPRIDR_REVID 0x0000FFFF /* Revision Identification. */
u8 res5[0x04];
- u32 spcr; /* System Priority Configuration Register */
-#define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable. */
-#define SPCR_PCIPR 0x03000000 /* PCI bridge system bus request priority. */
-#define SPCR_TBEN 0x00400000 /* E300 PowerPC core time base unit enable. */
-#define SPCR_COREPR 0x00300000 /* E300 PowerPC Core system bus request priority. */
-#define SPCR_TSEC1DP 0x00003000 /* TSEC1 data priority. */
-#define SPCR_TSEC1BDP 0x00000C00 /* TSEC1 buffer descriptor priority. */
-#define SPCR_TSEC1EP 0x00000300 /* TSEC1 emergency priority. */
-#define SPCR_TSEC2DP 0x00000030 /* TSEC2 data priority. */
-#define SPCR_TSEC2BDP 0x0000000C /* TSEC2 buffer descriptor priority. */
-#define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority. */
+ u32 spcr; /* System Priority Configuration Register */
+#define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable. */
+#define SPCR_PCIHPE_SHIFT (31-3)
+#define SPCR_PCIPR 0x03000000 /* PCI bridge system bus request priority. */
+#define SPCR_PCIPR_SHIFT (31-7)
+#define SPCR_OPT 0x00800000 /* Optimize */
+#define SPCR_TBEN 0x00400000 /* E300 PowerPC core time base unit enable. */
+#define SPCR_TBEN_SHIFT (31-9)
+#define SPCR_COREPR 0x00300000 /* E300 PowerPC Core system bus request priority. */
+#define SPCR_COREPR_SHIFT (31-11)
+#if defined (CONFIG_MPC8349)
+#define SPCR_TSEC1DP 0x00003000 /* TSEC1 data priority. */
+#define SPCR_TSEC1DP_SHIFT (31-19)
+#define SPCR_TSEC1BDP 0x00000C00 /* TSEC1 buffer descriptor priority. */
+#define SPCR_TSEC1BDP_SHIFT (31-21)
+#define SPCR_TSEC1EP 0x00000300 /* TSEC1 emergency priority. */
+#define SPCR_TSEC1EP_SHIFT (31-23)
+#define SPCR_TSEC2DP 0x00000030 /* TSEC2 data priority. */
+#define SPCR_TSEC2DP_SHIFT (31-27)
+#define SPCR_TSEC2BDP 0x0000000C /* TSEC2 buffer descriptor priority. */
+#define SPCR_TSEC2BDP_SHIFT (31-29)
+#define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority. */
+#define SPCR_TSEC2EP_SHIFT (31-31)
#define SPCR_RES ~(SPCR_PCIHPE | SPCR_PCIPR | SPCR_TBEN | SPCR_COREPR \
| SPCR_TSEC1DP | SPCR_TSEC1BDP | SPCR_TSEC1EP \
| SPCR_TSEC2DP | SPCR_TSEC2BDP | SPCR_TSEC2EP)
- u32 sicrl; /* System General Purpose Register Low */
+#elif defined (CONFIG_MPC8360)
+#define SPCR_RES ~(SPCR_PCIHPE|SPCR_PCIPR|SPCR_OPT|SPCR_TBEN|SPCR_COREPR)
+#endif
+ u32 sicrl; /* System General Purpose Register Low */
+#if defined (CONFIG_MPC8349)
#define SICRL_LDP_A 0x80000000
#define SICRL_USB1 0x40000000
#define SICRL_USB0 0x20000000
@@ -91,8 +132,18 @@
| SICRL_GPIO1_D | SICRL_GPIO1_E | SICRL_GPIO1_F \
| SICRL_GPIO1_G | SICRL_GPIO1_H | SICRL_GPIO1_I \
| SICRL_GPIO1_J | SICRL_GPIO1_K | SICRL_GPIO1_L )
- u32 sicrh; /* System General Purpose Register High */
+#elif defined (CONFIG_MPC8360)
+#define SICRL_LDP_A 0xC0000000
+#define SICRL_LCLK_1 0x10000000
+#define SICRL_LCLK_2 0x08000000
+#define SICRL_SRCID_A 0x03000000
+#define SICRL_IRQ_CKSTP_A 0x00C00000
+#define SICRL_RES ~(SICRL_LDP_A | SICRL_LCLK_1 | SICRL_LCLK_2 | \
+ SICRL_SRCID_A | SICRL_IRQ_CKSTP_A)
+#endif
+ u32 sicrh; /* System General Purpose Register High */
#define SICRH_DDR 0x80000000
+#if defined (CONFIG_MPC8349)
#define SICRH_TSEC1_A 0x10000000
#define SICRH_TSEC1_B 0x08000000
#define SICRH_TSEC1_C 0x04000000
@@ -117,7 +168,7 @@
#define SICRH_GPIO2_H 0x00000060
#define SICRH_TSOBI1 0x00000002
#define SICRH_TSOBI2 0x00000001
-#define SICRh_RES ~( SICRH_DDR | SICRH_TSEC1_A | SICRH_TSEC1_B \
+#define SICRH_RES ~( SICRH_DDR | SICRH_TSEC1_A | SICRH_TSEC1_B \
| SICRH_TSEC1_C | SICRH_TSEC1_D | SICRH_TSEC1_E \
| SICRH_TSEC1_F | SICRH_TSEC2_A | SICRH_TSEC2_B \
| SICRH_TSEC2_C | SICRH_TSEC2_D | SICRH_TSEC2_E \
@@ -126,207 +177,256 @@
| SICRH_GPIO2_D | SICRH_GPIO2_E | SICRH_GPIO2_F \
| SICRH_GPIO2_G | SICRH_GPIO2_H | SICRH_TSOBI1 \
| SICRH_TSOBI2)
+#elif defined (CONFIG_MPC8360)
+#define SICRH_SECONDARY_DDR 0x40000000
+#define SICRH_SDDROE 0x02000000 /* SDDRIOE bit from reset configuration word high. */
+#define SICRH_UC1EOBI 0x00000004 /* UCC1 Ethernet Output Buffer Impedance. */
+#define SICRH_UC2E1OBI 0x00000002 /* UCC2 Ethernet pin option 1 Output Buffer Impedance. */
+#define SICRH_UC2E2OBI 0x00000001 /* UCC2 Ethernet pin option 2 Output Buffer Impedance. */
+#define SICRH_RES ~(SICRH_DDR | SICRH_SECONDARY_DDR | SICRH_SDDROE | \
+ SICRH_UC2E1OBI | SICRH_UC2E2OBI | SICRH_UC2E2OBI)
+#endif
u8 res6[0xE4];
-} sysconf8349_t;
+} sysconf83xx_t;
/*
* Watch Dog Timer (WDT) Registers
*/
-typedef struct wdt8349 {
+typedef struct wdt83xx {
u8 res0[4];
- u32 swcrr; /* System watchdog control register */
- u32 swcnr; /* System watchdog count register */
+ u32 swcrr; /* System watchdog control register */
+ u32 swcnr; /* System watchdog count register */
#define SWCNR_SWCN 0x0000FFFF Software Watchdog Count Field.
#define SWCNR_RES ~(SWCNR_SWCN)
u8 res1[2];
- u16 swsrr; /* System watchdog service register */
+ u16 swsrr; /* System watchdog service register */
+#define SWSRR_WS 0x0000FFFF /* Software Watchdog Service Field. */
u8 res2[0xF0];
-} wdt8349_t;
+} wdt83xx_t;
/*
* RTC/PIT Module Registers
*/
-typedef struct rtclk8349 {
- u32 cnr; /* control register */
-#define CNR_CLEN 0x00000080 /* Clock Enable Control Bit */
-#define CNR_CLIN 0x00000040 /* Input Clock Control Bit */
-#define CNR_AIM 0x00000002 /* Alarm Interrupt Mask Bit */
-#define CNR_SIM 0x00000001 /* Second Interrupt Mask Bit */
-#define CNR_RES ~(CNR_CLEN | CNR_CLIN | CNR_AIM | CNR_SIM)
- u32 ldr; /* load register */
- u32 psr; /* prescale register */
- u32 ctr; /* register */
- u32 evr; /* event register */
-#define RTEVR_SIF 0x00000001 /* Second Interrupt Flag Bit */
-#define RTEVR_AIF 0x00000002 /* Alarm Interrupt Flag Bit */
-#define RTEVR_RES ~(EVR_SIF | EVR_AIF)
- u32 alr; /* alarm register */
+typedef struct rtclk83xx {
+ u32 cnr; /* control register */
+#define CNR_CLEN 0x00000080 /* Clock Enable Control Bit */
+#define CNR_CLIN 0x00000040 /* Input Clock Control Bit */
+#define CNR_AIM 0x00000002 /* Alarm Interrupt Mask Bit */
+#define CNR_SIM 0x00000001 /* Second Interrupt Mask Bit */
+#define CNR_RES ~(CNR_CLEN | CNR_CLIN | CNR_AIM | CNR_SIM)
+ u32 ldr; /* load register */
+#define LDR_CLDV 0xFFFFFFFF /* Contains the 32-bit value to be
+ * loaded in a 32-bit RTC counter.*/
+ u32 psr; /* prescale register */
+#define PSR_PRSC 0xFFFFFFFF /* RTC Prescaler bits. */
+ u32 ctr; /* Counter value field register */
+#define CRT_CNTV 0xFFFFFFFF /* RTC Counter value field. */
+ u32 evr; /* event register */
+#define RTEVR_SIF 0x00000001 /* Second Interrupt Flag Bit */
+#define RTEVR_AIF 0x00000002 /* Alarm Interrupt Flag Bit */
+#define RTEVR_RES ~(RTEVR_SIF | RTEVR_AIF)
+#define PTEVR_PIF 0x00000001 /* Periodic interrupt flag bit. */
+#define PTEVR_RES ~(PTEVR_PIF)
+ u32 alr; /* alarm register */
u8 res0[0xE8];
-} rtclk8349_t;
+} rtclk83xx_t;
/*
* Global timper module
*/
-typedef struct gtm8349 {
- u8 cfr1; /* Timer1/2 Configuration */
-#define CFR1_PCAS 0x80 /* Pair Cascade mode */
-#define CFR1_BCM 0x40 /* Backward compatible mode */
-#define CFR1_STP2 0x20 /* Stop timer */
-#define CFR1_RST2 0x10 /* Reset timer */
-#define CFR1_GM2 0x08 /* Gate mode for pin 2 */
-#define CFR1_GM1 0x04 /* Gate mode for pin 1 */
-#define CFR1_STP1 0x02 /* Stop timer */
-#define CFR1_RST1 0x01 /* Reset timer */
- u8 res0[3];
- u8 cfr2; /* Timer3/4 Configuration */
-#define CFR2_PCAS 0x80 /* Pair Cascade mode */
-#define CFR2_SCAS 0x40 /* Super Cascade mode */
-#define CFR2_STP4 0x20 /* Stop timer */
-#define CFR2_RST4 0x10 /* Reset timer */
-#define CFR2_GM4 0x08 /* Gate mode for pin 4 */
-#define CFR2_GM3 0x04 /* Gate mode for pin 3 */
-#define CFR2_STP3 0x02 /* Stop timer */
-#define CFR2_RST3 0x01 /* Reset timer */
- u8 res1[10];
- u16 mdr1; /* Timer1 Mode Register */
-#define MDR_SPS 0xff00 /* Secondary Prescaler value */
-#define MDR_CE 0x00c0 /* Capture edge and enable interrupt */
-#define MDR_OM 0x0020 /* Output mode */
-#define MDR_ORI 0x0010 /* Output reference interrupt enable */
-#define MDR_FRR 0x0008 /* Free run/restart */
-#define MDR_ICLK 0x0006 /* Input clock source for the timer */
-#define MDR_GE 0x0001 /* Gate enable */
- u16 mdr2; /* Timer2 Mode Register */
- u16 rfr1; /* Timer1 Reference Register */
- u16 rfr2; /* Timer2 Reference Register */
- u16 cpr1; /* Timer1 Capture Register */
- u16 cpr2; /* Timer2 Capture Register */
- u16 cnr1; /* Timer1 Counter Register */
- u16 cnr2; /* Timer2 Counter Register */
- u16 mdr3; /* Timer3 Mode Register */
- u16 mdr4; /* Timer4 Mode Register */
- u16 rfr3; /* Timer3 Reference Register */
- u16 rfr4; /* Timer4 Reference Register */
- u16 cpr3; /* Timer3 Capture Register */
- u16 cpr4; /* Timer4 Capture Register */
- u16 cnr3; /* Timer3 Counter Register */
- u16 cnr4; /* Timer4 Counter Register */
- u16 evr1; /* Timer1 Event Register */
- u16 evr2; /* Timer2 Event Register */
- u16 evr3; /* Timer3 Event Register */
- u16 evr4; /* Timer4 Event Register */
-#define GTEVR_REF 0x0002 /* Output reference event */
-#define GTEVR_CAP 0x0001 /* Counter Capture event */
+typedef struct gtm83xx {
+ u8 cfr1; /* Timer1/2 Configuration */
+#define CFR1_PCAS 0x80 /* Pair Cascade mode */
+#define CFR1_BCM 0x40 /* Backward compatible mode */
+#define CFR1_STP2 0x20 /* Stop timer */
+#define CFR1_RST2 0x10 /* Reset timer */
+#define CFR1_GM2 0x08 /* Gate mode for pin 2 */
+#define CFR1_GM1 0x04 /* Gate mode for pin 1 */
+#define CFR1_STP1 0x02 /* Stop timer */
+#define CFR1_RST1 0x01 /* Reset timer */
+#define CFR1_RES ~(CFR1_PCAS | CFR1_STP2 | CFR1_RST2 | CFR1_GM2 |\
+ CFR1_GM1 | CFR1_STP1 | CFR1_RST1)
+ u8 res0[3];
+ u8 cfr2; /* Timer3/4 Configuration */
+#define CFR2_PCAS 0x80 /* Pair Cascade mode */
+#define CFR2_SCAS 0x40 /* Super Cascade mode */
+#define CFR2_STP4 0x20 /* Stop timer */
+#define CFR2_RST4 0x10 /* Reset timer */
+#define CFR2_GM4 0x08 /* Gate mode for pin 4 */
+#define CFR2_GM3 0x04 /* Gate mode for pin 3 */
+#define CFR2_STP3 0x02 /* Stop timer */
+#define CFR2_RST3 0x01 /* Reset timer */
+ u8 res1[10];
+ u16 mdr1; /* Timer1 Mode Register */
+#define MDR_SPS 0xff00 /* Secondary Prescaler value */
+#define MDR_CE 0x00c0 /* Capture edge and enable interrupt */
+#define MDR_OM 0x0020 /* Output mode */
+#define MDR_ORI 0x0010 /* Output reference interrupt enable */
+#define MDR_FRR 0x0008 /* Free run/restart */
+#define MDR_ICLK 0x0006 /* Input clock source for the timer */
+#define MDR_GE 0x0001 /* Gate enable */
+ u16 mdr2; /* Timer2 Mode Register */
+ u16 rfr1; /* Timer1 Reference Register */
+ u16 rfr2; /* Timer2 Reference Register */
+ u16 cpr1; /* Timer1 Capture Register */
+ u16 cpr2; /* Timer2 Capture Register */
+ u16 cnr1; /* Timer1 Counter Register */
+ u16 cnr2; /* Timer2 Counter Register */
+ u16 mdr3; /* Timer3 Mode Register */
+ u16 mdr4; /* Timer4 Mode Register */
+ u16 rfr3; /* Timer3 Reference Register */
+ u16 rfr4; /* Timer4 Reference Register */
+ u16 cpr3; /* Timer3 Capture Register */
+ u16 cpr4; /* Timer4 Capture Register */
+ u16 cnr3; /* Timer3 Counter Register */
+ u16 cnr4; /* Timer4 Counter Register */
+ u16 evr1; /* Timer1 Event Register */
+ u16 evr2; /* Timer2 Event Register */
+ u16 evr3; /* Timer3 Event Register */
+ u16 evr4; /* Timer4 Event Register */
+#define GTEVR_REF 0x0002 /* Output reference event */
+#define GTEVR_CAP 0x0001 /* Counter Capture event */
#define GTEVR_RES ~(EVR_CAP|EVR_REF)
- u16 psr1; /* Timer1 Prescaler Register */
- u16 psr2; /* Timer2 Prescaler Register */
- u16 psr3; /* Timer3 Prescaler Register */
- u16 psr4; /* Timer4 Prescaler Register */
- u8 res[0xC0];
-} gtm8349_t;
+ u16 psr1; /* Timer1 Prescaler Register */
+ u16 psr2; /* Timer2 Prescaler Register */
+ u16 psr3; /* Timer3 Prescaler Register */
+ u16 psr4; /* Timer4 Prescaler Register */
+#define GTPSR_PPS 0x00FF /* Primary Prescaler Bits. */
+#define GTPSR_RES ~(GTPSR_PPS)
+ u8 res[0xC0];
+} gtm83xx_t;
/*
* Integrated Programmable Interrupt Controller
*/
-typedef struct ipic8349 {
- u32 sicfr; /* System Global Interrupt Configuration Register (SICFR) */
-#define SICFR_HPI 0x7f000000 /* Highest Priority Interrupt */
-#define SICFR_MPSB 0x00400000 /* Mixed interrupts Priority Scheme for group B */
-#define SICFR_MPSA 0x00200000 /* Mixed interrupts Priority Scheme for group A */
-#define SICFR_IPSD 0x00080000 /* Internal interrupts Priority Scheme for group D */
-#define SICFR_IPSA 0x00010000 /* Internal interrupts Priority Scheme for group A */
-#define SICFR_HPIT 0x00000300 /* HPI priority position IPIC output interrupt Type */
+typedef struct ipic83xx {
+ u32 sicfr; /* System Global Interrupt Configuration Register (SICFR) */
+#define SICFR_HPI 0x7f000000 /* Highest Priority Interrupt */
+#define SICFR_MPSB 0x00400000 /* Mixed interrupts Priority Scheme for group B */
+#define SICFR_MPSA 0x00200000 /* Mixed interrupts Priority Scheme for group A */
+#define SICFR_IPSD 0x00080000 /* Internal interrupts Priority Scheme for group D */
+#define SICFR_IPSA 0x00010000 /* Internal interrupts Priority Scheme for group A */
+#define SICFR_HPIT 0x00000300 /* HPI priority position IPIC output interrupt Type */
#define SICFR_RES ~(SICFR_HPI|SICFR_MPSB|SICFR_MPSA|SICFR_IPSD|SICFR_IPSA|SICFR_HPIT)
- u32 sivcr; /* System Global Interrupt Vector Register (SIVCR) */
-#define SICVR_IVECX 0xfc000000 /* Interrupt vector (for CE compatibility purpose only not used in 8349 IPIC implementation) */
-#define SICVR_IVEC 0x0000007f /* Interrupt vector */
+ u32 sivcr; /* System Global Interrupt Vector Register (SIVCR) */
+#define SICVR_IVECX 0xfc000000 /* Interrupt vector (for CE compatibility purpose only not used in 8349 IPIC implementation) */
+#define SICVR_IVEC 0x0000007f /* Interrupt vector */
#define SICVR_RES ~(SICVR_IVECX|SICVR_IVEC)
- u32 sipnr_h; /* System Internal Interrupt Pending Register - High (SIPNR_H) */
-#define SIIH_TSEC1TX 0x80000000 /* TSEC1 Tx interrupt */
-#define SIIH_TSEC1RX 0x40000000 /* TSEC1 Rx interrupt */
+ u32 sipnr_h; /* System Internal Interrupt Pending Register - High (SIPNR_H) */
+#if defined (CONFIG_MPC8349)
+#define SIIH_TSEC1TX 0x80000000 /* TSEC1 Tx interrupt */
+#define SIIH_TSEC1RX 0x40000000 /* TSEC1 Rx interrupt */
#define SIIH_TSEC1ER 0x20000000 /* TSEC1 Eror interrupt */
-#define SIIH_TSEC2TX 0x10000000 /* TSEC2 Tx interrupt */
-#define SIIH_TSEC2RX 0x08000000 /* TSEC2 Rx interrupt */
+#define SIIH_TSEC2TX 0x10000000 /* TSEC2 Tx interrupt */
+#define SIIH_TSEC2RX 0x08000000 /* TSEC2 Rx interrupt */
#define SIIH_TSEC2ER 0x04000000 /* TSEC2 Eror interrupt */
#define SIIH_USB2DR 0x02000000 /* USB2 DR interrupt */
-#define SIIH_USB2MPH 0x01000000 /* USB2 MPH interrupt */
+#define SIIH_USB2MPH 0x01000000 /* USB2 MPH interrupt */
+#endif
+#if defined (CONFIG_MPC8360)
+#define SIIH_H_QE_H 0x80000000 /* QE high interrupt */
+#define SIIH_H_QE_L 0x40000000 /* QE low interrupt */
+#endif
#define SIIH_UART1 0x00000080 /* UART1 interrupt */
#define SIIH_UART2 0x00000040 /* UART2 interrupt */
#define SIIH_SEC 0x00000020 /* SEC interrupt */
#define SIIH_I2C1 0x00000004 /* I2C1 interrupt */
-#define SIIH_I2C2 0x00000002 /* I2C1 interrupt */
+#define SIIH_I2C2 0x00000002 /* I2C2 interrupt */
+#if defined (CONFIG_MPC8349)
#define SIIH_SPI 0x00000001 /* SPI interrupt */
#define SIIH_RES ~(SIIH_TSEC1TX | SIIH_TSEC1RX | SIIH_TSEC1ER \
| SIIH_TSEC2TX | SIIH_TSEC2RX | SIIH_TSEC2ER \
| SIIH_USB2DR | SIIH_USB2MPH | SIIH_UART1 \
| SIIH_UART2 | SIIH_SEC | SIIH_I2C1 \
| SIIH_I2C2 | SIIH_SPI)
- u32 sipnr_l; /* System Internal Interrupt Pending Register - Low (SIPNR_L) */
-#define SIIL_RTCS 0x80000000 /* RTC SECOND interrupt */
-#define SIIL_PIT 0x40000000 /* PIT interrupt */
-#define SIIL_PCI1 0x20000000 /* PCI1 interrupt */
-#define SIIL_PCI2 0x10000000 /* PCI2 interrupt */
-#define SIIL_RTCA 0x08000000 /* RTC ALARM interrupt */
-#define SIIL_MU 0x04000000 /* Message Unit interrupt */
-#define SIIL_SBA 0x02000000 /* System Bus Arbiter interrupt */
-#define SIIL_DMA 0x01000000 /* DMA interrupt */
-#define SIIL_GTM4 0x00800000 /* GTM4 interrupt */
-#define SIIL_GTM8 0x00400000 /* GTM8 interrupt */
-#define SIIL_GPIO1 0x00200000 /* GPIO1 interrupt */
-#define SIIL_GPIO2 0x00100000 /* GPIO2 interrupt */
-#define SIIL_DDR 0x00080000 /* DDR interrupt */
-#define SIIL_LBC 0x00040000 /* LBC interrupt */
-#define SIIL_GTM2 0x00020000 /* GTM2 interrupt */
-#define SIIL_GTM6 0x00010000 /* GTM6 interrupt */
-#define SIIL_PMC 0x00008000 /* PMC interrupt */
-#define SIIL_GTM3 0x00000800 /* GTM3 interrupt */
-#define SIIL_GTM7 0x00000400 /* GTM7 interrupt */
-#define SIIL_GTM1 0x00000020 /* GTM1 interrupt */
-#define SIIL_GTM5 0x00000010 /* GTM5 interrupt */
-#define SIIL_DPTC 0x00000001 /* DPTC interrupt (!!! Invisible for user !!!) */
+#endif
+#if defined (CONFIG_MPC8360)
+#define SIIH_RES ~(SIIH_H_QE_H | SIIH_H_QE_L | SIIH_H_UART1 | \
+ SIIH_H_UART2| SIIH_H_SEC | SIIH_H_I2C1 |SIIH_H_I2C2)
+#endif
+ u32 sipnr_l; /* System Internal Interrupt Pending Register - Low (SIPNR_L) */
+#define SIIL_RTCS 0x80000000 /* RTC SECOND interrupt */
+#define SIIL_PIT 0x40000000 /* PIT interrupt */
+#define SIIL_PCI1 0x20000000 /* PCI1 interrupt */
+#if defined (CONFIG_MPC8349)
+#define SIIL_PCI2 0x10000000 /* PCI2 interrupt */
+#endif
+#define SIIL_RTCA 0x08000000 /* RTC ALARM interrupt */
+#define SIIL_MU 0x04000000 /* Message Unit interrupt */
+#define SIIL_SBA 0x02000000 /* System Bus Arbiter interrupt */
+#define SIIL_DMA 0x01000000 /* DMA interrupt */
+#define SIIL_GTM4 0x00800000 /* GTM4 interrupt */
+#define SIIL_GTM8 0x00400000 /* GTM8 interrupt */
+#if defined (CONFIG_MPC8349)
+#define SIIL_GPIO1 0x00200000 /* GPIO1 interrupt */
+#define SIIL_GPIO2 0x00100000 /* GPIO2 interrupt */
+#endif
+#if defined (CONFIG_MPC8360)
+#define SIIL_QEP 0x00200000 /* QE ports interrupt */
+#define SIIL_SDDR 0x00100000 /* SDDR interrupt */
+#endif
+#define SIIL_DDR 0x00080000 /* DDR interrupt */
+#define SIIL_LBC 0x00040000 /* LBC interrupt */
+#define SIIL_GTM2 0x00020000 /* GTM2 interrupt */
+#define SIIL_GTM6 0x00010000 /* GTM6 interrupt */
+#define SIIL_PMC 0x00008000 /* PMC interrupt */
+#define SIIL_GTM3 0x00000800 /* GTM3 interrupt */
+#define SIIL_GTM7 0x00000400 /* GTM7 interrupt */
+#define SIIL_GTM1 0x00000020 /* GTM1 interrupt */
+#define SIIL_GTM5 0x00000010 /* GTM5 interrupt */
+#define SIIL_DPTC 0x00000001 /* DPTC interrupt (!!! Invisible for user !!!) */
+#if defined (CONFIG_MPC8349)
#define SIIL_RES ~(SIIL_RTCS | SIIL_PIT | SIIL_PCI1 | SIIL_PCI2 \
| SIIL_RTCA | SIIL_MU | SIIL_SBA | SIIL_DMA \
| SIIL_GTM4 | SIIL_GTM8 | SIIL_GPIO1 | SIIL_GPIO2 \
| SIIL_DDR | SIIL_LBC | SIIL_GTM2 | SIIL_GTM6 \
| SIIL_PMC |SIIL_GTM3 | SIIL_GTM7 | SIIL_GTM1 \
| SIIL_GTM5 |SIIL_DPTC )
- u32 siprr_a; /* System Internal Interrupt Group A Priority Register (PRR) */
- u8 res0[8];
- u32 siprr_d; /* System Internal Interrupt Group D Priority Register (PRR) */
- u32 simsr_h; /* System Internal Interrupt Mask Register - High (SIIH) */
- u32 simsr_l; /* System Internal Interrupt Mask Register - Low (SIIL) */
- u8 res1[4];
- u32 sepnr; /* System External Interrupt Pending Register (SEI) */
- u32 smprr_a; /* System Mixed Interrupt Group A Priority Register (PRR) */
- u32 smprr_b; /* System Mixed Interrupt Group B Priority Register (PRR) */
-#define PRR_0 0xe0000000 /* Priority Register, Position 0 programming */
-#define PRR_1 0x1c000000 /* Priority Register, Position 1 programming */
-#define PRR_2 0x03800000 /* Priority Register, Position 2 programming */
-#define PRR_3 0x00700000 /* Priority Register, Position 3 programming */
-#define PRR_4 0x0000e000 /* Priority Register, Position 4 programming */
-#define PRR_5 0x00001c00 /* Priority Register, Position 5 programming */
-#define PRR_6 0x00000380 /* Priority Register, Position 6 programming */
-#define PRR_7 0x00000070 /* Priority Register, Position 7 programming */
+#endif
+#if defined (CONFIG_MPC8360)
+#define SIIL_RES ~(SIIL_RTCS |SIIL_PIT |SIIL_PCI1 |SIIL_RTCALR \
+ |SIIL_MU |SIIL_SBA |SIIL_DMA |SIIL_GTM4 |SIIL_GTM8 \
+ |SIIL_QEP | SIIL_SDDR| SIIL_DDR |SIIL_LBC |SIIL_GTM2 \
+ |SIIL_GTM6 |SIIL_PMC |SIIL_GTM3 |SIIL_GTM7 |SIIL_GTM1 \
+ |SIIL_GTM5 )
+#endif
+ u32 siprr_a; /* System Internal Interrupt Group A Priority Register (PRR) */
+ u8 res0[8];
+ u32 siprr_d; /* System Internal Interrupt Group D Priority Register (PRR) */
+ u32 simsr_h; /* System Internal Interrupt Mask Register - High (SIIH) */
+ u32 simsr_l; /* System Internal Interrupt Mask Register - Low (SIIL) */
+ u8 res1[4];
+ u32 sepnr; /* System External Interrupt Pending Register (SEI) */
+ u32 smprr_a; /* System Mixed Interrupt Group A Priority Register (PRR) */
+ u32 smprr_b; /* System Mixed Interrupt Group B Priority Register (PRR) */
+#define PRR_0 0xe0000000 /* Priority Register, Position 0 programming */
+#define PRR_1 0x1c000000 /* Priority Register, Position 1 programming */
+#define PRR_2 0x03800000 /* Priority Register, Position 2 programming */
+#define PRR_3 0x00700000 /* Priority Register, Position 3 programming */
+#define PRR_4 0x0000e000 /* Priority Register, Position 4 programming */
+#define PRR_5 0x00001c00 /* Priority Register, Position 5 programming */
+#define PRR_6 0x00000380 /* Priority Register, Position 6 programming */
+#define PRR_7 0x00000070 /* Priority Register, Position 7 programming */
#define PRR_RES ~(PRR_0|PRR_1|PRR_2|PRR_3|PRR_4|PRR_5|PRR_6|PRR_7)
- u32 semsr; /* System External Interrupt Mask Register (SEI) */
-#define SEI_IRQ0 0x80000000 /* IRQ0 external interrupt */
-#define SEI_IRQ1 0x40000000 /* IRQ1 external interrupt */
-#define SEI_IRQ2 0x20000000 /* IRQ2 external interrupt */
-#define SEI_IRQ3 0x10000000 /* IRQ3 external interrupt */
-#define SEI_IRQ4 0x08000000 /* IRQ4 external interrupt */
-#define SEI_IRQ5 0x04000000 /* IRQ5 external interrupt */
-#define SEI_IRQ6 0x02000000 /* IRQ6 external interrupt */
-#define SEI_IRQ7 0x01000000 /* IRQ7 external interrupt */
-#define SEI_SIRQ0 0x00008000 /* SIRQ0 external interrupt */
+ u32 semsr; /* System External Interrupt Mask Register (SEI) */
+#define SEI_IRQ0 0x80000000 /* IRQ0 external interrupt */
+#define SEI_IRQ1 0x40000000 /* IRQ1 external interrupt */
+#define SEI_IRQ2 0x20000000 /* IRQ2 external interrupt */
+#define SEI_IRQ3 0x10000000 /* IRQ3 external interrupt */
+#define SEI_IRQ4 0x08000000 /* IRQ4 external interrupt */
+#define SEI_IRQ5 0x04000000 /* IRQ5 external interrupt */
+#define SEI_IRQ6 0x02000000 /* IRQ6 external interrupt */
+#define SEI_IRQ7 0x01000000 /* IRQ7 external interrupt */
+#define SEI_SIRQ0 0x00008000 /* SIRQ0 external interrupt */
#define SEI_RES ~( SEI_IRQ0 | SEI_IRQ1 | SEI_IRQ2 | SEI_IRQ3 \
| SEI_IRQ4 | SEI_IRQ5 | SEI_IRQ6 | SEI_IRQ7 \
| SEI_SIRQ0)
- u32 secnr; /* System External Interrupt Control Register (SECNR) */
-#define SECNR_MIXB0T 0xc0000000 /* MIXB0 priority position IPIC output interrupt type */
-#define SECNR_MIXB1T 0x30000000 /* MIXB1 priority position IPIC output interrupt type */
-#define SECNR_MIXA0T 0x00c00000 /* MIXA0 priority position IPIC output interrupt type */
-#define SECNR_SYSA1T 0x00300000 /* MIXA1 priority position IPIC output interrupt type */
+ u32 secnr; /* System External Interrupt Control Register (SECNR) */
+#define SECNR_MIXB0T 0xc0000000 /* MIXB0 priority position IPIC output interrupt type */
+#define SECNR_MIXB1T 0x30000000 /* MIXB1 priority position IPIC output interrupt type */
+#define SECNR_MIXA0T 0x00c00000 /* MIXA0 priority position IPIC output interrupt type */
+#define SECNR_SYSA1T 0x00300000 /* MIXA1 priority position IPIC output interrupt type */
#define SECNR_EDI0 0x00008000 /* IRQ0 external interrupt edge/level detect */
#define SECNR_EDI1 0x00004000 /* IRQ1 external interrupt edge/level detect */
#define SECNR_EDI2 0x00002000 /* IRQ2 external interrupt edge/level detect */
@@ -339,176 +439,238 @@
| SECNR_SYSA1T | SECNR_EDI0 | SECNR_EDI1 \
| SECNR_EDI2 | SECNR_EDI3 | SECNR_EDI4 \
| SECNR_EDI5 | SECNR_EDI6 | SECNR_EDI7)
- u32 sersr; /* System Error Status Register (SERR) */
- u32 sermr; /* System Error Mask Register (SERR) */
-#define SERR_IRQ0 0x80000000 /* IRQ0 MCP request */
-#define SERR_WDT 0x40000000 /* WDT MCP request */
-#define SERR_SBA 0x20000000 /* SBA MCP request */
-#define SERR_DDR 0x10000000 /* DDR MCP request */
-#define SERR_LBC 0x08000000 /* LBC MCP request */
-#define SERR_PCI1 0x04000000 /* PCI1 MCP request */
-#define SERR_PCI2 0x02000000 /* PCI2 MCP request */
-#define SERR_MU 0x01000000 /* MU MCP request */
-#define SERR_RNC 0x00010000 /* MU MCP request (!!! Non-visible for users !!!) */
+ u32 sersr; /* System Error Status Register (SERR) */
+ u32 sermr; /* System Error Mask Register (SERR) */
+#define SERR_IRQ0 0x80000000 /* IRQ0 MCP request */
+#define SERR_WDT 0x40000000 /* WDT MCP request */
+#define SERR_SBA 0x20000000 /* SBA MCP request */
+#if defined (CONFIG_MPC8349)
+#define SERR_DDR 0x10000000 /* DDR MCP request */
+#define SERR_LBC 0x08000000 /* LBC MCP request */
+#define SERR_PCI1 0x04000000 /* PCI1 MCP request */
+#define SERR_PCI2 0x02000000 /* PCI2 MCP request */
+#endif
+#if defined (CONFIG_MPC8360)
+#define SERR_CIEE 0x10000000 /* CIEE MCP request */
+#define SERR_CMEE 0x08000000 /* CMEEMCP request */
+#define SERR_PCI 0x04000000 /* PCI MCP request */
+#endif
+#define SERR_MU 0x01000000 /* MU MCP request */
+#define SERR_RNC 0x00010000 /* MU MCP request (!!! Non-visible for users !!!) */
+#if defined (CONFIG_MPC8349)
#define SERR_RES ~( SERR_IRQ0 | SERR_WDT | SERR_SBA | SERR_DDR \
|SERR_LBC | SERR_PCI1 | SERR_PCI2 | SERR_MU \
|SERR_RNC )
- u32 sercr; /* System Error Control Register (SERCR) */
-#define SERCR_MCPR 0x00000001 /* MCP Route */
+#elif defined (CONFIG_MPC8360)
+#define SERR_RES ~( SERR_IRQ0|SERR_WDT |SERR_SBA |SERR_CIEE\
+ |SERR_CMEE|SERR_PCI|SERR_MU)
+#endif
+ u32 sercr; /* System Error Control Register (SERCR) */
+#define SERCR_MCPR 0x00000001 /* MCP Route */
#define SERCR_RES ~(SERCR_MCPR)
- u8 res2[4];
- u32 sifcr_h; /* System Internal Interrupt Force Register - High (SIIH) */
- u32 sifcr_l; /* System Internal Interrupt Force Register - Low (SIIL) */
- u32 sefcr; /* System External Interrupt Force Register (SEI) */
- u32 serfr; /* System Error Force Register (SERR) */
- u8 res3[0xA0];
-} ipic8349_t;
+ u8 res2[4];
+ u32 sifcr_h; /* System Internal Interrupt Force Register - High (SIIH) */
+ u32 sifcr_l; /* System Internal Interrupt Force Register - Low (SIIL) */
+ u32 sefcr; /* System External Interrupt Force Register (SEI) */
+ u32 serfr; /* System Error Force Register (SERR) */
+ u32 scvcr; /* System Critical Interrupt Vector Register */
+#define SCVCR_CVECX 0xFC000000 /* Backward (MPC8260) compatible
+ critical interrupt vector. */
+#define SCVCR_CVEC 0x0000007F /* Critical interrupt vector */
+#define SCVCR_RES ~(SCVCR_CVECX|SCVCR_CVEC)
+ u32 smvcr; /* System Management Interrupt Vector Register */
+#define SMVCR_CVECX 0xFC000000 /* Backward (MPC8260) compatible
+ critical interrupt vector. */
+#define SMVCR_CVEC 0x0000007F /* Critical interrupt vector */
+#define SMVCR_RES ~(SMVCR_CVECX|SMVCR_CVEC)
+ u8 res3[0x98];
+} ipic83xx_t;
/*
* System Arbiter Registers
*/
-typedef struct arbiter8349 {
- u32 acr; /* Arbiter Configuration Register */
-#define ACR_COREDIS 0x10000000 /* Core disable. */
-#define ACR_PIPE_DEP 0x00070000 /* Pipeline depth (number of outstanding transactions). */
-#define ACR_PCI_RPTCNT 0x00007000 /* PCI repeat count. */
-#define ACR_RPTCNT 0x00000700 /* Repeat count. */
-#define ACR_APARK 0x00000030 /* Address parking. */
-#define ACR_PARKM 0x0000000F /* Parking master. */
+typedef struct arbiter83xx {
+ u32 acr; /* Arbiter Configuration Register */
+#define ACR_COREDIS 0x10000000 /* Core disable. */
+#define ACR_COREDIS_SHIFT (31-7)
+#define ACR_PIPE_DEP 0x00070000 /* Pipeline depth (number of outstanding transactions). */
+#define ACR_PIPE_DEP_SHIFT (31-15)
+#define ACR_PCI_RPTCNT 0x00007000 /* PCI repeat count. */
+#define ACR_PCI_RPTCNT_SHIFT (31-19)
+#define ACR_RPTCNT 0x00000700 /* Repeat count. */
+#define ACR_RPTCNT_SHIFT (31-23)
+#define ACR_APARK 0x00000030 /* Address parking. */
+#define ACR_APARK_SHIFT (31-27)
+#define ACR_PARKM 0x0000000F /* Parking master. */
+#define ACR_PARKM_SHIFT (31-31)
#define ACR_RES ~(ACR_COREDIS|ACR_PIPE_DEP|ACR_PCI_RPTCNT|ACR_RPTCNT|ACR_APARK|ACR_PARKM)
- u32 atr; /* Arbiter Timers Register */
-#define ATR_DTO 0x00FF0000 /* Data time out. */
-#define ATR_ATO 0x000000FF /* Address time out. */
+ u32 atr; /* Arbiter Timers Register */
+#define ATR_DTO 0x00FF0000 /* Data time out. */
+#define ATR_ATO 0x000000FF /* Address time out. */
#define ATR_RES ~(ATR_DTO|ATR_ATO)
u8 res[4];
- u32 aer; /* Arbiter Event Register (AE)*/
- u32 aidr; /* Arbiter Interrupt Definition Register (AE) */
- u32 amr; /* Arbiter Mask Register (AE) */
- u32 aeatr; /* Arbiter Event Attributes Register */
-#define AEATR_EVENT 0x07000000 /* Event type. */
-#define AEATR_MSTR_ID 0x001F0000 /* Master Id. */
-#define AEATR_TBST 0x00000800 /* Transfer burst. */
-#define AEATR_TSIZE 0x00000700 /* Transfer Size. */
-#define AEATR_TTYPE 0x0000001F /* Transfer Type. */
+ u32 aer; /* Arbiter Event Register (AE) */
+ u32 aidr; /* Arbiter Interrupt Definition Register (AE) */
+ u32 amr; /* Arbiter Mask Register (AE) */
+ u32 aeatr; /* Arbiter Event Attributes Register */
+#define AEATR_EVENT 0x07000000 /* Event type. */
+#define AEATR_MSTR_ID 0x001F0000 /* Master Id. */
+#define AEATR_TBST 0x00000800 /* Transfer burst. */
+#define AEATR_TSIZE 0x00000700 /* Transfer Size. */
+#define AEATR_TTYPE 0x0000001F /* Transfer Type. */
#define AEATR_RES ~(AEATR_EVENT|AEATR_MSTR_ID|AEATR_TBST|AEATR_TSIZE|AEATR_TTYPE)
- u32 aeadr; /* Arbiter Event Address Register */
- u32 aerr; /* Arbiter Event Response Register (AE)*/
-#define AE_ETEA 0x00000020 /* Transfer error. */
-#define AE_RES_ 0x00000010 /* Reserved transfer type. */
-#define AE_ECW 0x00000008 /* External control word transfer type. */
-#define AE_AO 0x00000004 /* Address Only transfer type. */
-#define AE_DTO 0x00000002 /* Data time out. */
-#define AE_ATO 0x00000001 /* Address time out. */
+ u32 aeadr; /* Arbiter Event Address Register */
+ u32 aerr; /* Arbiter Event Response Register (AE) */
+#define AE_ETEA 0x00000020 /* Transfer error. */
+#define AE_RES_ 0x00000010 /* Reserved transfer type. */
+#define AE_ECW 0x00000008 /* External control word transfer type. */
+#define AE_AO 0x00000004 /* Address Only transfer type. */
+#define AE_DTO 0x00000002 /* Data time out. */
+#define AE_ATO 0x00000001 /* Address time out. */
#define AE_RSRV ~(AE_ETEA|AE_RES_|AE_ECW|AE_AO|AE_DTO|AE_ATO)
u8 res1[0xDC];
-} arbiter8349_t;
+} arbiter83xx_t;
/*
* Reset Module
*/
-typedef struct reset8349 {
- u32 rcwl; /* RCWL Register */
+typedef struct reset83xx {
+ u32 rcwl; /* RCWL Register */
#define RCWL_LBIUCM 0x80000000 /* LBIUCM */
#define RCWL_LBIUCM_SHIFT 31
#define RCWL_DDRCM 0x40000000 /* DDRCM */
#define RCWL_DDRCM_SHIFT 30
+#if defined (CONFIG_MPC8349)
#define RCWL_SVCOD 0x30000000 /* SVCOD */
-#define RCWL_SPMF 0x0f000000 /* SPMF */
-#define RCWL_SPMF_SHIFT 24
+#endif
+#define RCWL_SPMF 0x0f000000 /* SPMF */
+#define RCWL_SPMF_SHIFT 24
#define RCWL_COREPLL 0x007F0000 /* COREPLL */
#define RCWL_COREPLL_SHIFT 16
#define RCWL_CEVCOD 0x000000C0 /* CEVCOD */
#define RCWL_CEPDF 0x00000020 /* CEPDF */
+#define RCWL_CEPDF_SHIFT 5
#define RCWL_CEPMF 0x0000001F /* CEPMF */
-#define RCWL_RES ~(RCWL_BIUCM|RCWL_DDRCM|RCWL_SVCOD|RCWL_SPMF|RCWL_COREPLL|RCWL_CEVCOD|RCWL_CEPDF|RCWL_CEPMF)
- u32 rcwh; /* RCHL Register */
+#define RCWL_CEPMF_SHIFT 0
+#if defined (CONFIG_MPC8349)
+#define RCWL_RES ~(RCWL_LBIUCM|RCWL_DDRCM|RCWL_SVCOD|RCWL_SPMF|RCWL_COREPLL|RCWL_CEVCOD|RCWL_CEPDF|RCWL_CEPMF)
+#elif defined (CONFIG_MPC8360)
+#define RCWL_RES ~(RCWL_LBIUCM|RCWL_DDRCM|RCWL_SPMF|RCWL_COREPLL|RCWL_CEPDF|RCWL_CEPMF)
+#endif
+ u32 rcwh; /* RCHL Register */
#define RCWH_PCIHOST 0x80000000 /* PCIHOST */
#define RCWH_PCIHOST_SHIFT 31
+#if defined (CONFIG_MPC8349)
#define RCWH_PCI64 0x40000000 /* PCI64 */
#define RCWH_PCI1ARB 0x20000000 /* PCI1ARB */
#define RCWH_PCI2ARB 0x10000000 /* PCI2ARB */
+#elif defined (CONFIG_MPC8360)
+#define RCWH_PCIARB 0x20000000 /* PCI internal arbiter mode. */
+#define RCWH_PCICKDRV 0x10000000 /* PCI clock output drive. */
+#endif
#define RCWH_COREDIS 0x08000000 /* COREDIS */
-#define RCWH_BMS 0x04000000 /* BMS */
+#define RCWH_BMS 0x04000000 /* BMS */
#define RCWH_BOOTSEQ 0x03000000 /* BOOTSEQ */
-#define RCWH_SWEN 0x00800000 /* SWEN */
+#define RCWH_SWEN 0x00800000 /* SWEN */
#define RCWH_ROMLOC 0x00700000 /* ROMLOC */
+#if defined (CONFIG_MPC8349)
#define RCWH_TSEC1M 0x0000c000 /* TSEC1M */
#define RCWH_TSEC2M 0x00003000 /* TSEC2M */
-#define RCWH_TPR 0x00000100 /* TPR */
-#define RCWH_TLE 0x00000008 /* TLE */
-#define RCWH_LALE 0x00000004 /* LALE */
+#define RCWH_TPR 0x00000100 /* TPR */
+#elif defined (CONFIG_MPC8360)
+#define RCWH_SDDRIOE 0x00000010 /* Secondary DDR IO Enable. */
+#endif
+#define RCWH_TLE 0x00000008 /* TLE */
+#define RCWH_LALE 0x00000004 /* LALE */
+#if defined (CONFIG_MPC8349)
#define RCWH_RES ~(RCWH_PCIHOST | RCWH_PCI64 | RCWH_PCI1ARB \
| RCWH_PCI2ARB | RCWH_COREDIS | RCWH_BMS \
| RCWH_BOOTSEQ | RCWH_SWEN | RCWH_ROMLOC \
| RCWH_TSEC1M | RCWH_TSEC2M | RCWH_TPR \
| RCWH_TLE | RCWH_LALE)
- u8 res0[8];
- u32 rsr; /* Reset status Register */
-#define RSR_RSTSRC 0xE0000000 /* Reset source */
+#elif defined (CONFIG_MPC8360)
+#define RCWH_RES ~(RCWH_PCIHOST|RCWH_PCIARB|RCWH_PCICKDRV \
+ |RCWH_COREDIS|RCWH_BMS|RCWH_BOOTSEQ|RCWH_SWEN \
+ |RCWH_SDDRIOE |RCWH_TLE)
+#endif
+ u8 res0[8];
+ u32 rsr; /* Reset status Register */
+#define RSR_RSTSRC 0xE0000000 /* Reset source */
#define RSR_RSTSRC_SHIFT 29
-#define RSR_BSF 0x00010000 /* Boot seq. fail */
-#define RSR_BSF_SHIFT 16
-#define RSR_SWSR 0x00002000 /* software soft reset */
-#define RSR_SWSR_SHIFT 13
-#define RSR_SWHR 0x00001000 /* software hard reset */
-#define RSR_SWHR_SHIFT 12
-#define RSR_JHRS 0x00000200 /* jtag hreset */
-#define RSR_JHRS_SHIFT 9
-#define RSR_JSRS 0x00000100 /* jtag sreset status */
-#define RSR_JSRS_SHIFT 8
-#define RSR_CSHR 0x00000010 /* checkstop reset status */
-#define RSR_CSHR_SHIFT 4
-#define RSR_SWRS 0x00000008 /* software watchdog reset status */
-#define RSR_SWRS_SHIFT 3
-#define RSR_BMRS 0x00000004 /* bus monitop reset status */
-#define RSR_BMRS_SHIFT 2
-#define RSR_SRS 0x00000002 /* soft reset status */
-#define RSR_SRS_SHIFT 1
-#define RSR_HRS 0x00000001 /* hard reset status */
-#define RSR_HRS_SHIFT 0
+#define RSR_BSF 0x00010000 /* Boot seq. fail */
+#define RSR_BSF_SHIFT 16
+#define RSR_SWSR 0x00002000 /* software soft reset */
+#define RSR_SWSR_SHIFT 13
+#define RSR_SWHR 0x00001000 /* software hard reset */
+#define RSR_SWHR_SHIFT 12
+#define RSR_JHRS 0x00000200 /* jtag hreset */
+#define RSR_JHRS_SHIFT 9
+#define RSR_JSRS 0x00000100 /* jtag sreset status */
+#define RSR_JSRS_SHIFT 8
+#define RSR_CSHR 0x00000010 /* checkstop reset status */
+#define RSR_CSHR_SHIFT 4
+#define RSR_SWRS 0x00000008 /* software watchdog reset status */
+#define RSR_SWRS_SHIFT 3
+#define RSR_BMRS 0x00000004 /* bus monitop reset status */
+#define RSR_BMRS_SHIFT 2
+#define RSR_SRS 0x00000002 /* soft reset status */
+#define RSR_SRS_SHIFT 1
+#define RSR_HRS 0x00000001 /* hard reset status */
+#define RSR_HRS_SHIFT 0
#define RSR_RES ~(RSR_RSTSRC | RSR_BSF | RSR_SWSR | RSR_SWHR | RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS | RSR_BMRS | RSR_SRS | RSR_HRS)
- u32 rmr; /* Reset mode Register */
-#define RMR_CSRE 0x00000001 /* checkstop reset enable */
-#define RMR_CSRE_SHIFT 0
+ u32 rmr; /* Reset mode Register */
+#define RMR_CSRE 0x00000001 /* checkstop reset enable */
+#define RMR_CSRE_SHIFT 0
#define RMR_RES ~(RMR_CSRE)
- u32 rpr; /* Reset protection Register */
- u32 rcr; /* Reset Control Register */
-#define RCR_SWHR 0x00000002 /* software hard reset */
-#define RCR_SWSR 0x00000001 /* software soft reset */
+ u32 rpr; /* Reset protection Register */
+ u32 rcr; /* Reset Control Register */
+#define RCR_SWHR 0x00000002 /* software hard reset */
+#define RCR_SWSR 0x00000001 /* software soft reset */
#define RCR_RES ~(RCR_SWHR | RCR_SWSR)
- u32 rcer; /* Reset Control Enable Register */
-#define RCER_CRE 0x00000001 /* software hard reset */
+ u32 rcer; /* Reset Control Enable Register */
+#define RCER_CRE 0x00000001 /* software hard reset */
#define RCER_RES ~(RCER_CRE)
- u8 res1[0xDC];
-} reset8349_t;
+ u8 res1[0xDC];
+} reset83xx_t;
-typedef struct clk8349 {
- u32 spmr; /* system PLL mode Register */
+typedef struct clk83xx {
+ u32 spmr; /* system PLL mode Register */
#define SPMR_LBIUCM 0x80000000 /* LBIUCM */
#define SPMR_DDRCM 0x40000000 /* DDRCM */
+#if defined (CONFIG_MPC8349)
#define SPMR_SVCOD 0x30000000 /* SVCOD */
-#define SPMR_SPMF 0x0F000000 /* SPMF */
-#define SPMR_CKID 0x00800000 /* CKID */
+#endif
+#define SPMR_SPMF 0x0F000000 /* SPMF */
+#define SPMR_CKID 0x00800000 /* CKID */
#define SPMR_CKID_SHIFT 23
#define SPMR_COREPLL 0x007F0000 /* COREPLL */
#define SPMR_CEVCOD 0x000000C0 /* CEVCOD */
#define SPMR_CEPDF 0x00000020 /* CEPDF */
#define SPMR_CEPMF 0x0000001F /* CEPMF */
+#if defined (CONFIG_MPC8349)
#define SPMR_RES ~(SPMR_LBIUCM | SPMR_DDRCM | SPMR_SVCOD \
| SPMR_SPMF | SPMR_CKID | SPMR_COREPLL \
| SPMR_CEVCOD | SPMR_CEPDF | SPMR_CEPMF)
- u32 occr; /* output clock control Register */
+#elif defined (CONFIG_MPC8360)
+#define SPMR_RES ~(SPMR_LBIUCM | SPMR_DDRCM | SPMR_SPMF \
+ | SPMR_CKID | SPMR_COREPLL | SPMR_CEVCOD \
+ | SPMR_CEPDF | SPMR_CEPMF)
+#endif
+ u32 occr; /* output clock control Register */
#define OCCR_PCICOE0 0x80000000 /* PCICOE0 */
#define OCCR_PCICOE1 0x40000000 /* PCICOE1 */
#define OCCR_PCICOE2 0x20000000 /* PCICOE2 */
+#if defined (CONFIG_MPC8349)
#define OCCR_PCICOE3 0x10000000 /* PCICOE3 */
#define OCCR_PCICOE4 0x08000000 /* PCICOE4 */
#define OCCR_PCICOE5 0x04000000 /* PCICOE5 */
#define OCCR_PCICOE6 0x02000000 /* PCICOE6 */
#define OCCR_PCICOE7 0x01000000 /* PCICOE7 */
+#endif
#define OCCR_PCICD0 0x00800000 /* PCICD0 */
#define OCCR_PCICD1 0x00400000 /* PCICD1 */
#define OCCR_PCICD2 0x00200000 /* PCICD2 */
+#if defined (CONFIG_MPC8349)
#define OCCR_PCICD3 0x00100000 /* PCICD3 */
#define OCCR_PCICD4 0x00080000 /* PCICD4 */
#define OCCR_PCICD5 0x00040000 /* PCICD5 */
@@ -522,72 +684,253 @@
| OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICD3 \
| OCCR_PCICD4 | OCCR_PCICD5 | OCCR_PCICD6 \
| OCCR_PCICD7 | OCCR_PCI1CR | OCCR_PCI2CR )
- u32 sccr; /* system clock control Register */
-#define SCCR_TSEC1CM 0xc0000000 /* TSEC1CM */
+#endif
+#if defined (CONFIG_MPC8360)
+#define OCCR_PCICR 0x00000002 /* PCI clock rate */
+#define OCCR_RES ~(OCCR_PCICOE0|OCCR_PCICOE1|OCCR_PCICOE2 \
+ |OCCR_PCICD0|OCCR_PCICD1|OCCR_PCICD2|OCCR_PCICR )
+#endif
+ u32 sccr; /* system clock control Register */
+#if defined (CONFIG_MPC8349)
+#define SCCR_TSEC1CM 0xc0000000 /* TSEC1CM */
#define SCCR_TSEC1CM_SHIFT 30
-#define SCCR_TSEC2CM 0x30000000 /* TSEC2CM */
+#define SCCR_TSEC2CM 0x30000000 /* TSEC2CM */
#define SCCR_TSEC2CM_SHIFT 28
-#define SCCR_ENCCM 0x03000000 /* ENCCM */
+#endif
+#define SCCR_ENCCM 0x03000000 /* ENCCM */
#define SCCR_ENCCM_SHIFT 24
-#define SCCR_USBMPHCM 0x00c00000 /* USBMPHCM */
+#if defined (CONFIG_MPC8349)
+#define SCCR_USBMPHCM 0x00c00000 /* USBMPHCM */
#define SCCR_USBMPHCM_SHIFT 22
-#define SCCR_USBDRCM 0x00300000 /* USBDRCM */
+#define SCCR_USBDRCM 0x00300000 /* USBDRCM */
#define SCCR_USBDRCM_SHIFT 20
-#define SCCR_PCICM 0x00010000 /* PCICM */
+#endif
+#define SCCR_PCICM 0x00010000 /* PCICM */
+#if defined (CONFIG_MPC8349)
#define SCCR_RES ~( SCCR_TSEC1CM | SCCR_TSEC2CM | SCCR_ENCCM \
| SCCR_USBMPHCM | SCCR_USBDRCM | SCCR_PCICM)
- u8 res0[0xF4];
-} clk8349_t;
+#endif
+#if defined (CONFIG_MPC8360)
+#define SCCR_RES ~(SCCR_ENCCM | SCCR_PCICM)
+#endif
+ u8 res0[0xF4];
+} clk83xx_t;
/*
* Power Management Control Module
*/
-typedef struct pmc8349 {
- u32 pmccr; /* PMC Configuration Register */
-#define PMCCR_SLPEN 0x00000001 /* System Low Power Enable */
-#define PMCCR_DLPEN 0x00000002 /* DDR SDRAM Low Power Enable */
-#define PMCCR_RES ~(PMCCR_SLPEN | PMCCR_DLPEN)
- u32 pmcer; /* PMC Event Register */
-#define PMCER_PMCI 0x00000001 /* PMC Interrupt */
+typedef struct pmc83xx {
+ u32 pmccr; /* PMC Configuration Register */
+#define PMCCR_SLPEN 0x00000001 /* System Low Power Enable */
+#define PMCCR_DLPEN 0x00000002 /* DDR SDRAM Low Power Enable */
+#if defined (CONFIG_MPC8360)
+#define PMCCR_SDLPEN 0x00000004 /* Secondary DDR SDRAM Low Power Enable */
+#define PMCCR_RES ~(PMCCR_SLPEN | PMCCR_DLPEN | PMCCR_SDLPEN)
+#elif defined (CONFIG_MPC8349)
+#define PMCCR_RES ~(PMCCR_SLPEN | PMCCR_DLPEN)
+#endif
+ u32 pmcer; /* PMC Event Register */
+#define PMCER_PMCI 0x00000001 /* PMC Interrupt */
#define PMCER_RES ~(PMCER_PMCI)
- u32 pmcmr; /* PMC Mask Register */
-#define PMCMR_PMCIE 0x0001 /* PMC Interrupt Enable */
+ u32 pmcmr; /* PMC Mask Register */
+#define PMCMR_PMCIE 0x0001 /* PMC Interrupt Enable */
#define PMCMR_RES ~(PMCMR_PMCIE)
u8 res0[0xF4];
-} pmc8349_t;
+} pmc83xx_t;
-
+#if defined (CONFIG_MPC8349)
/*
* general purpose I/O module
*/
-typedef struct gpio8349 {
- u32 dir; /* direction register */
- u32 odr; /* open drain register */
- u32 dat; /* data register */
- u32 ier; /* interrupt event register */
- u32 imr; /* interrupt mask register */
- u32 icr; /* external interrupt control register */
+typedef struct gpio83xx {
+ u32 dir; /* direction register */
+ u32 odr; /* open drain register */
+ u32 dat; /* data register */
+ u32 ier; /* interrupt event register */
+ u32 imr; /* interrupt mask register */
+ u32 icr; /* external interrupt control register */
u8 res0[0xE8];
-} gpio8349_t;
+} gpio83xx_t;
+#endif
+
+#if defined (CONFIG_MPC8360)
+/*
+ * QE Ports Interrupts Registers
+ */
+typedef struct qepi83xx {
+ u8 res0[0xC];
+ u32 qepier; /* QE Ports Interrupt Event Register */
+#define QEPIER_PA15 0x80000000
+#define QEPIER_PA16 0x40000000
+#define QEPIER_PA29 0x20000000
+#define QEPIER_PA30 0x10000000
+#define QEPIER_PB3 0x08000000
+#define QEPIER_PB5 0x04000000
+#define QEPIER_PB12 0x02000000
+#define QEPIER_PB13 0x01000000
+#define QEPIER_PB26 0x00800000
+#define QEPIER_PB27 0x00400000
+#define QEPIER_PC27 0x00200000
+#define QEPIER_PC28 0x00100000
+#define QEPIER_PC29 0x00080000
+#define QEPIER_PD12 0x00040000
+#define QEPIER_PD13 0x00020000
+#define QEPIER_PD16 0x00010000
+#define QEPIER_PD17 0x00008000
+#define QEPIER_PD26 0x00004000
+#define QEPIER_PD27 0x00002000
+#define QEPIER_PE12 0x00001000
+#define QEPIER_PE13 0x00000800
+#define QEPIER_PE24 0x00000400
+#define QEPIER_PE25 0x00000200
+#define QEPIER_PE26 0x00000100
+#define QEPIER_PE27 0x00000080
+#define QEPIER_PE31 0x00000040
+#define QEPIER_PF20 0x00000020
+#define QEPIER_PG31 0x00000010
+#define QEPIER_RES ~(QEPIER_PA15|QEPIER_PA16|QEPIER_PA29|QEPIER_PA30|QEPIER_PB3 \
+ |QEPIER_PB5|QEPIER_PB12|QEPIER_PB13|QEPIER_PB26|QEPIER_PB27 \
+ |QEPIER_PC27|QEPIER_PC28|QEPIER_PC29|QEPIER_PD12|QEPIER_PD13 \
+ |QEPIER_PD16|QEPIER_PD17|QEPIER_PD26|QEPIER_PD27|QEPIER_PE12 \
+ |QEPIER_PE13|QEPIER_PE24|QEPIER_PE25|QEPIER_PE26|QEPIER_PE27 \
+ |QEPIER_PE31|QEPIER_PF20|QEPIER_PG31)
+ u32 qepimr; /* QE Ports Interrupt Mask Register */
+#define QEPIMR_PA15 0x80000000
+#define QEPIMR_PA16 0x40000000
+#define QEPIMR_PA29 0x20000000
+#define QEPIMR_PA30 0x10000000
+#define QEPIMR_PB3 0x08000000
+#define QEPIMR_PB5 0x04000000
+#define QEPIMR_PB12 0x02000000
+#define QEPIMR_PB13 0x01000000
+#define QEPIMR_PB26 0x00800000
+#define QEPIMR_PB27 0x00400000
+#define QEPIMR_PC27 0x00200000
+#define QEPIMR_PC28 0x00100000
+#define QEPIMR_PC29 0x00080000
+#define QEPIMR_PD12 0x00040000
+#define QEPIMR_PD13 0x00020000
+#define QEPIMR_PD16 0x00010000
+#define QEPIMR_PD17 0x00008000
+#define QEPIMR_PD26 0x00004000
+#define QEPIMR_PD27 0x00002000
+#define QEPIMR_PE12 0x00001000
+#define QEPIMR_PE13 0x00000800
+#define QEPIMR_PE24 0x00000400
+#define QEPIMR_PE25 0x00000200
+#define QEPIMR_PE26 0x00000100
+#define QEPIMR_PE27 0x00000080
+#define QEPIMR_PE31 0x00000040
+#define QEPIMR_PF20 0x00000020
+#define QEPIMR_PG31 0x00000010
+#define QEPIMR_RES ~(QEPIMR_PA15|QEPIMR_PA16|QEPIMR_PA29|QEPIMR_PA30|QEPIMR_PB3 \
+ |QEPIMR_PB5|QEPIMR_PB12|QEPIMR_PB13|QEPIMR_PB26|QEPIMR_PB27 \
+ |QEPIMR_PC27|QEPIMR_PC28|QEPIMR_PC29|QEPIMR_PD12|QEPIMR_PD13 \
+ |QEPIMR_PD16|QEPIMR_PD17|QEPIMR_PD26|QEPIMR_PD27|QEPIMR_PE12 \
+ |QEPIMR_PE13|QEPIMR_PE24|QEPIMR_PE25|QEPIMR_PE26|QEPIMR_PE27 \
+ |QEPIMR_PE31|QEPIMR_PF20|QEPIMR_PG31)
+ u32 qepicr; /* QE Ports Interrupt Control Register */
+#define QEPICR_PA15 0x80000000
+#define QEPICR_PA16 0x40000000
+#define QEPICR_PA29 0x20000000
+#define QEPICR_PA30 0x10000000
+#define QEPICR_PB3 0x08000000
+#define QEPICR_PB5 0x04000000
+#define QEPICR_PB12 0x02000000
+#define QEPICR_PB13 0x01000000
+#define QEPICR_PB26 0x00800000
+#define QEPICR_PB27 0x00400000
+#define QEPICR_PC27 0x00200000
+#define QEPICR_PC28 0x00100000
+#define QEPICR_PC29 0x00080000
+#define QEPICR_PD12 0x00040000
+#define QEPICR_PD13 0x00020000
+#define QEPICR_PD16 0x00010000
+#define QEPICR_PD17 0x00008000
+#define QEPICR_PD26 0x00004000
+#define QEPICR_PD27 0x00002000
+#define QEPICR_PE12 0x00001000
+#define QEPICR_PE13 0x00000800
+#define QEPICR_PE24 0x00000400
+#define QEPICR_PE25 0x00000200
+#define QEPICR_PE26 0x00000100
+#define QEPICR_PE27 0x00000080
+#define QEPICR_PE31 0x00000040
+#define QEPICR_PF20 0x00000020
+#define QEPICR_PG31 0x00000010
+#define QEPICR_RES ~(QEPICR_PA15|QEPICR_PA16|QEPICR_PA29|QEPICR_PA30|QEPICR_PB3 \
+ |QEPICR_PB5|QEPICR_PB12|QEPICR_PB13|QEPICR_PB26|QEPICR_PB27 \
+ |QEPICR_PC27|QEPICR_PC28|QEPICR_PC29|QEPICR_PD12|QEPICR_PD13 \
+ |QEPICR_PD16|QEPICR_PD17|QEPICR_PD26|QEPICR_PD27|QEPICR_PE12 \
+ |QEPICR_PE13|QEPICR_PE24|QEPICR_PE25|QEPICR_PE26|QEPICR_PE27 \
+ |QEPICR_PE31|QEPICR_PF20|QEPICR_PG31)
+ u8 res1[0xE8];
+} qepi83xx_t;
+
+/*
+ * general purpose I/O module
+ */
+typedef struct gpio_n {
+ u32 podr; /* Open Drain Register */
+ u32 pdat; /* Data Register */
+ u32 dir1; /* direction register 1 */
+ u32 dir2; /* direction register 2 */
+ u32 ppar1; /* Pin Assignment Register 1 */
+ u32 ppar2; /* Pin Assignment Register 2 */
+} gpio_n_t;
+
+typedef struct gpio83xx {
+ gpio_n_t ioport[0x7];
+ u8 res0[0x358];
+} gpio83xx_t;
+
+/*
+ * QE Secondary Bus Access Windows
+ */
+
+typedef struct qesba83xx {
+ u32 lbmcsar; /* Local bus memory controller start address */
+#define LBMCSAR_SA 0x000FFFFF /* 20 most-significant bits of the start address */
+#define LBMCSAR_RES ~(LBMCSAR_SA)
+ u32 sdmcsar; /* Secondary DDR memory controller start address */
+#define SDMCSAR_SA 0x000FFFFF /* 20 most-significant bits of the start address */
+#define SDMCSAR_RES ~(SDMCSAR_SA)
+ u8 res0[0x38];
+ u32 lbmcear; /* Local bus memory controller end address */
+#define LBMCEAR_EA 0x000FFFFF /* 20 most-significant bits of the end address */
+#define LBMCEAR_RES ~(LBMCEAR_EA)
+ u32 sdmcear; /* Secondary DDR memory controller end address */
+#define SDMCEAR_EA 0x000FFFFF /* 20 most-significant bits of the end address */
+#define SDMCEAR_RES ~(SDMCEAR_EA)
+ u8 res1[0x38];
+ u32 lbmcar; /* Local bus memory controller attributes */
+#define LBMCAR_WEN 0x00000001 /* Forward transactions to the QE local bus */
+#define LBMCAR_RES ~(LBMCAR_WEN)
+ u32 sdmcar; /* Secondary DDR memory controller attributes */
+#define SDMCAR_WEN 0x00000001 /* Forward transactions to the second DDR bus */
+#define SDMCAR_RES ~(SDMCAR_WEN)
+ u8 res2[0x778];
+} qesba83xx_t;
+#endif
/*
* DDR Memory Controller Memory Map
*/
-typedef struct ddr_cs_bnds{
+typedef struct ddr_cs_bnds {
u32 csbnds;
#define CSBNDS_SA 0x00FF0000
-#define CSBNDS_SA_SHIFT 8
+#define CSBNDS_SA_SHIFT 8
#define CSBNDS_EA 0x000000FF
-#define CSBNDS_EA_SHIFT 24
- u8 res0[4];
+#define CSBNDS_EA_SHIFT 24
+ u8 res0[4];
} ddr_cs_bnds_t;
-typedef struct ddr8349{
- ddr_cs_bnds_t csbnds[4]; /**< Chip Select x Memory Bounds */
+typedef struct ddr83xx {
+ ddr_cs_bnds_t csbnds[4]; /**< Chip Select x Memory Bounds */
u8 res0[0x60];
- u32 cs_config[4]; /**< Chip Select x Configuration */
-#define CSCONFIG_EN 0x80000000
-#define CSCONFIG_AP 0x00800000
+ u32 cs_config[4]; /**< Chip Select x Configuration */
+#define CSCONFIG_EN 0x80000000
+#define CSCONFIG_AP 0x00800000
#define CSCONFIG_ROW_BIT 0x00000700
#define CSCONFIG_ROW_BIT_12 0x00000000
#define CSCONFIG_ROW_BIT_13 0x00000100
@@ -598,7 +941,7 @@
#define CSCONFIG_COL_BIT_10 0x00000002
#define CSCONFIG_COL_BIT_11 0x00000003
u8 res1[0x78];
- u32 timing_cfg_1; /**< SDRAM Timing Configuration 1 */
+ u32 timing_cfg_1; /**< SDRAM Timing Configuration 1 */
#define TIMING_CFG1_PRETOACT 0x70000000
#define TIMING_CFG1_PRETOACT_SHIFT 28
#define TIMING_CFG1_ACTTOPRE 0x0F000000
@@ -610,70 +953,70 @@
#define TIMING_CFG1_REFREC 0x0000F000
#define TIMING_CFG1_REFREC_SHIFT 12
#define TIMING_CFG1_WRREC 0x00000700
-#define TIMING_CFG1_WRREC_SHIFT 8
+#define TIMING_CFG1_WRREC_SHIFT 8
#define TIMING_CFG1_ACTTOACT 0x00000070
#define TIMING_CFG1_ACTTOACT_SHIFT 4
#define TIMING_CFG1_WRTORD 0x00000007
#define TIMING_CFG1_WRTORD_SHIFT 0
-#define TIMING_CFG1_CASLAT_20 0x00030000 /* CAS latency = 2.0 */
-#define TIMING_CFG1_CASLAT_25 0x00040000 /* CAS latency = 2.5 */
+#define TIMING_CFG1_CASLAT_20 0x00030000 /* CAS latency = 2.0 */
+#define TIMING_CFG1_CASLAT_25 0x00040000 /* CAS latency = 2.5 */
- u32 timing_cfg_2; /**< SDRAM Timing Configuration 2 */
-#define TIMING_CFG2_CPO 0x0F000000
-#define TIMING_CFG2_CPO_SHIFT 24
-#define TIMING_CFG2_ACSM 0x00080000
+ u32 timing_cfg_2; /**< SDRAM Timing Configuration 2 */
+#define TIMING_CFG2_CPO 0x0F000000
+#define TIMING_CFG2_CPO_SHIFT 24
+#define TIMING_CFG2_ACSM 0x00080000
#define TIMING_CFG2_WR_DATA_DELAY 0x00001C00
-#define TIMING_CFG2_WR_DATA_DELAY_SHIFT 10
-#define TIMING_CFG2_CPO_DEF 0x00000000 /* default (= CASLAT + 1) */
+#define TIMING_CFG2_WR_DATA_DELAY_SHIFT 10
+#define TIMING_CFG2_CPO_DEF 0x00000000 /* default (= CASLAT + 1) */
- u32 sdram_cfg; /**< SDRAM Control Configuration */
+ u32 sdram_cfg; /**< SDRAM Control Configuration */
#define SDRAM_CFG_MEM_EN 0x80000000
-#define SDRAM_CFG_SREN 0x40000000
+#define SDRAM_CFG_SREN 0x40000000
#define SDRAM_CFG_ECC_EN 0x20000000
-#define SDRAM_CFG_RD_EN 0x10000000
+#define SDRAM_CFG_RD_EN 0x10000000
#define SDRAM_CFG_SDRAM_TYPE 0x03000000
#define SDRAM_CFG_SDRAM_TYPE_SHIFT 24
#define SDRAM_CFG_DYN_PWR 0x00200000
-#define SDRAM_CFG_32_BE 0x00080000
-#define SDRAM_CFG_8_BE 0x00040000
-#define SDRAM_CFG_NCAP 0x00020000
-#define SDRAM_CFG_2T_EN 0x00008000
+#define SDRAM_CFG_32_BE 0x00080000
+#define SDRAM_CFG_8_BE 0x00040000
+#define SDRAM_CFG_NCAP 0x00020000
+#define SDRAM_CFG_2T_EN 0x00008000
#define SDRAM_CFG_SDRAM_TYPE_DDR 0x02000000
u8 res2[4];
- u32 sdram_mode; /**< SDRAM Mode Configuration */
+ u32 sdram_mode; /**< SDRAM Mode Configuration */
#define SDRAM_MODE_ESD 0xFFFF0000
#define SDRAM_MODE_ESD_SHIFT 16
#define SDRAM_MODE_SD 0x0000FFFF
-#define SDRAM_MODE_SD_SHIFT 0
-#define DDR_MODE_EXT_MODEREG 0x4000 /* select extended mode reg */
-#define DDR_MODE_EXT_OPMODE 0x3FF8 /* operating mode, mask */
-#define DDR_MODE_EXT_OP_NORMAL 0x0000 /* normal operation */
-#define DDR_MODE_QFC 0x0004 /* QFC / compatibility, mask */
-#define DDR_MODE_QFC_COMP 0x0000 /* compatible to older SDRAMs */
-#define DDR_MODE_WEAK 0x0002 /* weak drivers */
-#define DDR_MODE_DLL_DIS 0x0001 /* disable DLL */
-#define DDR_MODE_CASLAT 0x0070 /* CAS latency, mask */
-#define DDR_MODE_CASLAT_15 0x0010 /* CAS latency 1.5 */
-#define DDR_MODE_CASLAT_20 0x0020 /* CAS latency 2 */
-#define DDR_MODE_CASLAT_25 0x0060 /* CAS latency 2.5 */
-#define DDR_MODE_CASLAT_30 0x0030 /* CAS latency 3 */
-#define DDR_MODE_BTYPE_SEQ 0x0000 /* sequential burst */
-#define DDR_MODE_BTYPE_ILVD 0x0008 /* interleaved burst */
-#define DDR_MODE_BLEN_2 0x0001 /* burst length 2 */
-#define DDR_MODE_BLEN_4 0x0002 /* burst length 4 */
-#define DDR_REFINT_166MHZ_7US 1302 /* exact value for 7.8125 µs */
-#define DDR_BSTOPRE 256 /* use 256 cycles as a starting point */
-#define DDR_MODE_MODEREG 0x0000 /* select mode register */
+#define SDRAM_MODE_SD_SHIFT 0
+#define DDR_MODE_EXT_MODEREG 0x4000 /* select extended mode reg */
+#define DDR_MODE_EXT_OPMODE 0x3FF8 /* operating mode, mask */
+#define DDR_MODE_EXT_OP_NORMAL 0x0000 /* normal operation */
+#define DDR_MODE_QFC 0x0004 /* QFC / compatibility, mask */
+#define DDR_MODE_QFC_COMP 0x0000 /* compatible to older SDRAMs */
+#define DDR_MODE_WEAK 0x0002 /* weak drivers */
+#define DDR_MODE_DLL_DIS 0x0001 /* disable DLL */
+#define DDR_MODE_CASLAT 0x0070 /* CAS latency, mask */
+#define DDR_MODE_CASLAT_15 0x0010 /* CAS latency 1.5 */
+#define DDR_MODE_CASLAT_20 0x0020 /* CAS latency 2 */
+#define DDR_MODE_CASLAT_25 0x0060 /* CAS latency 2.5 */
+#define DDR_MODE_CASLAT_30 0x0030 /* CAS latency 3 */
+#define DDR_MODE_BTYPE_SEQ 0x0000 /* sequential burst */
+#define DDR_MODE_BTYPE_ILVD 0x0008 /* interleaved burst */
+#define DDR_MODE_BLEN_2 0x0001 /* burst length 2 */
+#define DDR_MODE_BLEN_4 0x0002 /* burst length 4 */
+#define DDR_REFINT_166MHZ_7US 1302 /* exact value for 7.8125 µs */
+#define DDR_BSTOPRE 256 /* use 256 cycles as a starting point */
+#define DDR_MODE_MODEREG 0x0000 /* select mode register */
u8 res3[8];
- u32 sdram_interval; /**< SDRAM Interval Configuration */
+ u32 sdram_interval; /**< SDRAM Interval Configuration */
#define SDRAM_INTERVAL_REFINT 0x3FFF0000
#define SDRAM_INTERVAL_REFINT_SHIFT 16
#define SDRAM_INTERVAL_BSTOPRE 0x00003FFF
-#define SDRAM_INTERVAL_BSTOPRE_SHIFT 0
- u8 res9[8];
- u32 sdram_clk_cntl;
+#define SDRAM_INTERVAL_BSTOPRE_SHIFT 0
+ u8 res9[8];
+ u32 sdram_clk_cntl;
#define DDR_SDRAM_CLK_CNTL_SS_EN 0x80000000
#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_025 0x01000000
#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 0x02000000
@@ -683,37 +1026,37 @@
u8 res4[0xCCC];
u32 data_err_inject_hi; /**< Memory Data Path Error Injection Mask High */
u32 data_err_inject_lo; /**< Memory Data Path Error Injection Mask Low */
- u32 ecc_err_inject; /**< Memory Data Path Error Injection Mask ECC */
+ u32 ecc_err_inject; /**< Memory Data Path Error Injection Mask ECC */
#define ECC_ERR_INJECT_EMB (0x80000000>>22) /* ECC Mirror Byte */
#define ECC_ERR_INJECT_EIEN (0x80000000>>23) /* Error Injection Enable */
#define ECC_ERR_INJECT_EEIM (0xff000000>>24) /* ECC Erroe Injection Enable */
#define ECC_ERR_INJECT_EEIM_SHIFT 0
u8 res5[0x14];
- u32 capture_data_hi; /**< Memory Data Path Read Capture High */
- u32 capture_data_lo; /**< Memory Data Path Read Capture Low */
- u32 capture_ecc; /**< Memory Data Path Read Capture ECC */
+ u32 capture_data_hi; /**< Memory Data Path Read Capture High */
+ u32 capture_data_lo; /**< Memory Data Path Read Capture Low */
+ u32 capture_ecc; /**< Memory Data Path Read Capture ECC */
#define CAPTURE_ECC_ECE (0xff000000>>24)
#define CAPTURE_ECC_ECE_SHIFT 0
u8 res6[0x14];
- u32 err_detect; /**< Memory Error Detect */
-#define ECC_ERROR_DETECT_MME (0x80000000>>0) /* Multiple Memory Errors */
+ u32 err_detect; /**< Memory Error Detect */
+#define ECC_ERROR_DETECT_MME (0x80000000>>0) /* Multiple Memory Errors */
#define ECC_ERROR_DETECT_MBE (0x80000000>>28) /* Multiple-Bit Error */
#define ECC_ERROR_DETECT_SBE (0x80000000>>29) /* Single-Bit ECC Error Pickup */
#define ECC_ERROR_DETECT_MSE (0x80000000>>31) /* Memory Select Error */
- u32 err_disable; /**< Memory Error Disable */
+ u32 err_disable; /**< Memory Error Disable */
#define ECC_ERROR_DISABLE_MBED (0x80000000>>28) /* Multiple-Bit ECC Error Disable */
#define ECC_ERROR_DISABLE_SBED (0x80000000>>29) /* Sinle-Bit ECC Error disable */
#define ECC_ERROR_DISABLE_MSED (0x80000000>>31) /* Memory Select Error Disable */
#define ECC_ERROR_ENABLE ~(ECC_ERROR_DISABLE_MSED|ECC_ERROR_DISABLE_SBED|ECC_ERROR_DISABLE_MBED)
- u32 err_int_en; /**< Memory Error Interrupt Enable */
+ u32 err_int_en; /**< Memory Error Interrupt Enable */
#define ECC_ERR_INT_EN_MBEE (0x80000000>>28) /* Multiple-Bit ECC Error Interrupt Enable */
#define ECC_ERR_INT_EN_SBEE (0x80000000>>29) /* Single-Bit ECC Error Interrupt Enable */
#define ECC_ERR_INT_EN_MSEE (0x80000000>>31) /* Memory Select Error Interrupt Enable */
#define ECC_ERR_INT_DISABLE ~(ECC_ERR_INT_EN_MBEE|ECC_ERR_INT_EN_SBEE|ECC_ERR_INT_EN_MSEE)
u32 capture_attributes; /**< Memory Error Attributes Capture */
-#define ECC_CAPT_ATTR_BNUM (0xe0000000>>1) /* Data Beat Num */
+#define ECC_CAPT_ATTR_BNUM (0xe0000000>>1) /* Data Beat Num */
#define ECC_CAPT_ATTR_BNUM_SHIFT 28
-#define ECC_CAPT_ATTR_TSIZ (0xc0000000>>6) /* Transaction Size */
+#define ECC_CAPT_ATTR_TSIZ (0xc0000000>>6) /* Transaction Size */
#define ECC_CAPT_ATTR_TSIZ_FOUR_DW 0
#define ECC_CAPT_ATTR_TSIZ_ONE_DW 1
#define ECC_CAPT_ATTR_TSIZ_TWO_DW 2
@@ -738,209 +1081,207 @@
#define ECC_CAPT_ATTR_TTYP_R_M_W 0x3
#define ECC_CAPT_ATTR_TTYP_SHIFT 12
#define ECC_CAPT_ATTR_VLD (0x80000000>>31) /* Valid */
- u32 capture_address; /**< Memory Error Address Capture */
+ u32 capture_address; /**< Memory Error Address Capture */
u32 capture_ext_address;/**< Memory Error Extended Address Capture */
- u32 err_sbe; /**< Memory Single-Bit ECC Error Management */
-#define ECC_ERROR_MAN_SBET (0xff000000>>8) /* Single-Bit Error Threshold 0..255*/
+ u32 err_sbe; /**< Memory Single-Bit ECC Error Management */
+#define ECC_ERROR_MAN_SBET (0xff000000>>8) /* Single-Bit Error Threshold 0..255 */
#define ECC_ERROR_MAN_SBET_SHIFT 16
-#define ECC_ERROR_MAN_SBEC (0xff000000>>24) /* Single Bit Error Counter 0..255*/
+#define ECC_ERROR_MAN_SBEC (0xff000000>>24) /* Single Bit Error Counter 0..255 */
#define ECC_ERROR_MAN_SBEC_SHIFT 0
u8 res7[0xA4];
u32 debug_reg;
u8 res8[0xFC];
-} ddr8349_t;
+} ddr83xx_t;
/*
* I2C1 Controller
*/
-
/*
* DUART
*/
-typedef struct duart8349{
+typedef struct duart83xx {
u8 urbr_ulcr_udlb; /**< combined register for URBR, UTHR and UDLB */
- u8 uier_udmb; /**< combined register for UIER and UDMB */
+ u8 uier_udmb; /**< combined register for UIER and UDMB */
u8 uiir_ufcr_uafr; /**< combined register for UIIR, UFCR and UAFR */
- u8 ulcr; /**< line control register */
- u8 umcr; /**< MODEM control register */
- u8 ulsr; /**< line status register */
- u8 umsr; /**< MODEM status register */
- u8 uscr; /**< scratch register */
+ u8 ulcr; /**< line control register */
+ u8 umcr; /**< MODEM control register */
+ u8 ulsr; /**< line status register */
+ u8 umsr; /**< MODEM status register */
+ u8 uscr; /**< scratch register */
u8 res0[8];
- u8 udsr; /**< DMA status register */
+ u8 udsr; /**< DMA status register */
u8 res1[3];
u8 res2[0xEC];
-} duart8349_t;
+} duart83xx_t;
/*
* Local Bus Controller Registers
*/
-typedef struct lbus_bank{
- u32 br; /**< Base Register */
- u32 or; /**< Base Register */
+typedef struct lbus_bank {
+ u32 br; /**< Base Register */
+ u32 or; /**< Base Register */
} lbus_bank_t;
-typedef struct lbus8349 {
+typedef struct lbus83xx {
lbus_bank_t bank[8];
u8 res0[0x28];
- u32 mar; /**< UPM Address Register */
+ u32 mar; /**< UPM Address Register */
u8 res1[0x4];
- u32 mamr; /**< UPMA Mode Register */
- u32 mbmr; /**< UPMB Mode Register */
- u32 mcmr; /**< UPMC Mode Register */
+ u32 mamr; /**< UPMA Mode Register */
+ u32 mbmr; /**< UPMB Mode Register */
+ u32 mcmr; /**< UPMC Mode Register */
u8 res2[0x8];
- u32 mrtpr; /**< Memory Refresh Timer Prescaler Register */
- u32 mdr; /**< UPM Data Register */
+ u32 mrtpr; /**< Memory Refresh Timer Prescaler Register */
+ u32 mdr; /**< UPM Data Register */
u8 res3[0x8];
- u32 lsdmr; /**< SDRAM Mode Register */
+ u32 lsdmr; /**< SDRAM Mode Register */
u8 res4[0x8];
- u32 lurt; /**< UPM Refresh Timer */
- u32 lsrt; /**< SDRAM Refresh Timer */
+ u32 lurt; /**< UPM Refresh Timer */
+ u32 lsrt; /**< SDRAM Refresh Timer */
u8 res5[0x8];
- u32 ltesr; /**< Transfer Error Status Register */
- u32 ltedr; /**< Transfer Error Disable Register */
- u32 lteir; /**< Transfer Error Interrupt Register */
- u32 lteatr; /**< Transfer Error Attributes Register */
- u32 ltear; /**< Transfer Error Address Register */
+ u32 ltesr; /**< Transfer Error Status Register */
+ u32 ltedr; /**< Transfer Error Disable Register */
+ u32 lteir; /**< Transfer Error Interrupt Register */
+ u32 lteatr; /**< Transfer Error Attributes Register */
+ u32 ltear; /**< Transfer Error Address Register */
u8 res6[0xC];
- u32 lbcr; /**< Configuration Register */
+ u32 lbcr; /**< Configuration Register */
#define LBCR_LDIS 0x80000000
-#define LBCR_LDIS_SHIFT 31
+#define LBCR_LDIS_SHIFT 31
#define LBCR_BCTLC 0x00C00000
#define LBCR_BCTLC_SHIFT 22
#define LBCR_LPBSE 0x00020000
#define LBCR_LPBSE_SHIFT 17
#define LBCR_EPAR 0x00010000
-#define LBCR_EPAR_SHIFT 16
+#define LBCR_EPAR_SHIFT 16
#define LBCR_BMT 0x0000FF00
-#define LBCR_BMT_SHIFT 8
- u32 lcrr; /**< Clock Ratio Register */
+#define LBCR_BMT_SHIFT 8
+ u32 lcrr; /**< Clock Ratio Register */
#define LCRR_DBYP 0x80000000
-#define LCRR_DBYP_SHIFT 31
+#define LCRR_DBYP_SHIFT 31
#define LCRR_BUFCMDC 0x30000000
#define LCRR_BUFCMDC_SHIFT 28
#define LCRR_ECL 0x03000000
-#define LCRR_ECL_SHIFT 24
+#define LCRR_ECL_SHIFT 24
#define LCRR_EADC 0x00030000
-#define LCRR_EADC_SHIFT 16
+#define LCRR_EADC_SHIFT 16
#define LCRR_CLKDIV 0x0000000F
#define LCRR_CLKDIV_SHIFT 0
-
u8 res7[0x28];
u8 res8[0xF00];
-} lbus8349_t;
+} lbus83xx_t;
+#if defined (CONFIG_MPC8349)
/*
* Serial Peripheral Interface
*/
-typedef struct spi8349
-{
+typedef struct spi83xx {
u32 mode; /**< mode register */
u32 event; /**< event register */
u32 mask; /**< mask register */
u32 com; /**< command register */
u8 res0[0x10];
- u32 tx; /**< transmit register */
- u32 rx; /**< receive register */
+ u32 tx; /**< transmit register */
+ u32 rx; /**< receive register */
u8 res1[0xD8];
-} spi8349_t;
-
+} spi83xx_t;
+#endif
/*
* DMA/Messaging Unit
*/
-typedef struct dma8349 {
- u32 res0[0xC]; /* 0x0-0x29 reseverd */
- u32 omisr; /* 0x30 Outbound message interrupt status register */
- u32 omimr; /* 0x34 Outbound message interrupt mask register */
- u32 res1[0x6]; /* 0x38-0x49 reserved */
+typedef struct dma83xx {
+ u32 res0[0xC]; /* 0x0-0x29 reseverd */
+ u32 omisr; /* 0x30 Outbound message interrupt status register */
+ u32 omimr; /* 0x34 Outbound message interrupt mask register */
+ u32 res1[0x6]; /* 0x38-0x49 reserved */
- u32 imr0; /* 0x50 Inbound message register 0 */
- u32 imr1; /* 0x54 Inbound message register 1 */
- u32 omr0; /* 0x58 Outbound message register 0 */
- u32 omr1; /* 0x5C Outbound message register 1 */
+ u32 imr0; /* 0x50 Inbound message register 0 */
+ u32 imr1; /* 0x54 Inbound message register 1 */
+ u32 omr0; /* 0x58 Outbound message register 0 */
+ u32 omr1; /* 0x5C Outbound message register 1 */
- u32 odr; /* 0x60 Outbound doorbell register */
- u32 res2; /* 0x64-0x67 reserved */
- u32 idr; /* 0x68 Inbound doorbell register */
- u32 res3[0x5]; /* 0x6C-0x79 reserved */
+ u32 odr; /* 0x60 Outbound doorbell register */
+ u32 res2; /* 0x64-0x67 reserved */
+ u32 idr; /* 0x68 Inbound doorbell register */
+ u32 res3[0x5]; /* 0x6C-0x79 reserved */
- u32 imisr; /* 0x80 Inbound message interrupt status register */
- u32 imimr; /* 0x84 Inbound message interrupt mask register */
- u32 res4[0x1E]; /* 0x88-0x99 reserved */
+ u32 imisr; /* 0x80 Inbound message interrupt status register */
+ u32 imimr; /* 0x84 Inbound message interrupt mask register */
+ u32 res4[0x1E]; /* 0x88-0x99 reserved */
- u32 dmamr0; /* 0x100 DMA 0 mode register */
- u32 dmasr0; /* 0x104 DMA 0 status register */
- u32 dmacdar0; /* 0x108 DMA 0 current descriptor address register */
- u32 res5; /* 0x10C reserved */
- u32 dmasar0; /* 0x110 DMA 0 source address register */
- u32 res6; /* 0x114 reserved */
- u32 dmadar0; /* 0x118 DMA 0 destination address register */
- u32 res7; /* 0x11C reserved */
- u32 dmabcr0; /* 0x120 DMA 0 byte count register */
- u32 dmandar0; /* 0x124 DMA 0 next descriptor address register */
- u32 res8[0x16]; /* 0x128-0x179 reserved */
+ u32 dmamr0; /* 0x100 DMA 0 mode register */
+ u32 dmasr0; /* 0x104 DMA 0 status register */
+ u32 dmacdar0; /* 0x108 DMA 0 current descriptor address register */
+ u32 res5; /* 0x10C reserved */
+ u32 dmasar0; /* 0x110 DMA 0 source address register */
+ u32 res6; /* 0x114 reserved */
+ u32 dmadar0; /* 0x118 DMA 0 destination address register */
+ u32 res7; /* 0x11C reserved */
+ u32 dmabcr0; /* 0x120 DMA 0 byte count register */
+ u32 dmandar0; /* 0x124 DMA 0 next descriptor address register */
+ u32 res8[0x16]; /* 0x128-0x179 reserved */
- u32 dmamr1; /* 0x180 DMA 1 mode register */
- u32 dmasr1; /* 0x184 DMA 1 status register */
- u32 dmacdar1; /* 0x188 DMA 1 current descriptor address register */
- u32 res9; /* 0x18C reserved */
- u32 dmasar1; /* 0x190 DMA 1 source address register */
- u32 res10; /* 0x194 reserved */
- u32 dmadar1; /* 0x198 DMA 1 destination address register */
- u32 res11; /* 0x19C reserved */
- u32 dmabcr1; /* 0x1A0 DMA 1 byte count register */
- u32 dmandar1; /* 0x1A4 DMA 1 next descriptor address register */
- u32 res12[0x16];/* 0x1A8-0x199 reserved */
+ u32 dmamr1; /* 0x180 DMA 1 mode register */
+ u32 dmasr1; /* 0x184 DMA 1 status register */
+ u32 dmacdar1; /* 0x188 DMA 1 current descriptor address register */
+ u32 res9; /* 0x18C reserved */
+ u32 dmasar1; /* 0x190 DMA 1 source address register */
+ u32 res10; /* 0x194 reserved */
+ u32 dmadar1; /* 0x198 DMA 1 destination address register */
+ u32 res11; /* 0x19C reserved */
+ u32 dmabcr1; /* 0x1A0 DMA 1 byte count register */
+ u32 dmandar1; /* 0x1A4 DMA 1 next descriptor address register */
+ u32 res12[0x16]; /* 0x1A8-0x199 reserved */
- u32 dmamr2; /* 0x200 DMA 2 mode register */
- u32 dmasr2; /* 0x204 DMA 2 status register */
- u32 dmacdar2; /* 0x208 DMA 2 current descriptor address register */
- u32 res13; /* 0x20C reserved */
- u32 dmasar2; /* 0x210 DMA 2 source address register */
- u32 res14; /* 0x214 reserved */
- u32 dmadar2; /* 0x218 DMA 2 destination address register */
- u32 res15; /* 0x21C reserved */
- u32 dmabcr2; /* 0x220 DMA 2 byte count register */
- u32 dmandar2; /* 0x224 DMA 2 next descriptor address register */
- u32 res16[0x16];/* 0x228-0x279 reserved */
+ u32 dmamr2; /* 0x200 DMA 2 mode register */
+ u32 dmasr2; /* 0x204 DMA 2 status register */
+ u32 dmacdar2; /* 0x208 DMA 2 current descriptor address register */
+ u32 res13; /* 0x20C reserved */
+ u32 dmasar2; /* 0x210 DMA 2 source address register */
+ u32 res14; /* 0x214 reserved */
+ u32 dmadar2; /* 0x218 DMA 2 destination address register */
+ u32 res15; /* 0x21C reserved */
+ u32 dmabcr2; /* 0x220 DMA 2 byte count register */
+ u32 dmandar2; /* 0x224 DMA 2 next descriptor address register */
+ u32 res16[0x16]; /* 0x228-0x279 reserved */
- u32 dmamr3; /* 0x280 DMA 3 mode register */
- u32 dmasr3; /* 0x284 DMA 3 status register */
- u32 dmacdar3; /* 0x288 DMA 3 current descriptor address register */
- u32 res17; /* 0x28C reserved */
- u32 dmasar3; /* 0x290 DMA 3 source address register */
- u32 res18; /* 0x294 reserved */
- u32 dmadar3; /* 0x298 DMA 3 destination address register */
- u32 res19; /* 0x29C reserved */
- u32 dmabcr3; /* 0x2A0 DMA 3 byte count register */
- u32 dmandar3; /* 0x2A4 DMA 3 next descriptor address register */
+ u32 dmamr3; /* 0x280 DMA 3 mode register */
+ u32 dmasr3; /* 0x284 DMA 3 status register */
+ u32 dmacdar3; /* 0x288 DMA 3 current descriptor address register */
+ u32 res17; /* 0x28C reserved */
+ u32 dmasar3; /* 0x290 DMA 3 source address register */
+ u32 res18; /* 0x294 reserved */
+ u32 dmadar3; /* 0x298 DMA 3 destination address register */
+ u32 res19; /* 0x29C reserved */
+ u32 dmabcr3; /* 0x2A0 DMA 3 byte count register */
+ u32 dmandar3; /* 0x2A4 DMA 3 next descriptor address register */
- u32 dmagsr; /* 0x2A8 DMA general status register */
- u32 res20[0x15];/* 0x2AC-0x2FF reserved */
-} dma8349_t;
+ u32 dmagsr; /* 0x2A8 DMA general status register */
+ u32 res20[0x15]; /* 0x2AC-0x2FF reserved */
+} dma83xx_t;
/* DMAMRn bits */
-#define DMA_CHANNEL_START (0x00000001) /* Bit - DMAMRn CS */
-#define DMA_CHANNEL_TRANSFER_MODE_DIRECT (0x00000004) /* Bit - DMAMRn CTM */
-#define DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN (0x00001000) /* Bit - DMAMRn SAHE */
-#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_1B (0x00000000) /* 2Bit- DMAMRn SAHTS 1byte */
-#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_2B (0x00004000) /* 2Bit- DMAMRn SAHTS 2bytes */
-#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_4B (0x00008000) /* 2Bit- DMAMRn SAHTS 4bytes */
-#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B (0x0000c000) /* 2Bit- DMAMRn SAHTS 8bytes */
-#define DMA_CHANNEL_SNOOP (0x00010000) /* Bit - DMAMRn DMSEN */
+#define DMA_CHANNEL_START (0x00000001) /* Bit - DMAMRn CS */
+#define DMA_CHANNEL_TRANSFER_MODE_DIRECT (0x00000004) /* Bit - DMAMRn CTM */
+#define DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN (0x00001000) /* Bit - DMAMRn SAHE */
+#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_1B (0x00000000) /* 2Bit- DMAMRn SAHTS 1byte */
+#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_2B (0x00004000) /* 2Bit- DMAMRn SAHTS 2bytes */
+#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_4B (0x00008000) /* 2Bit- DMAMRn SAHTS 4bytes */
+#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B (0x0000c000) /* 2Bit- DMAMRn SAHTS 8bytes */
+#define DMA_CHANNEL_SNOOP (0x00010000) /* Bit - DMAMRn DMSEN */
/* DMASRn bits */
-#define DMA_CHANNEL_BUSY (0x00000004) /* Bit - DMASRn CB */
-#define DMA_CHANNEL_TRANSFER_ERROR (0x00000080) /* Bit - DMASRn TE */
+#define DMA_CHANNEL_BUSY (0x00000004) /* Bit - DMASRn CB */
+#define DMA_CHANNEL_TRANSFER_ERROR (0x00000080) /* Bit - DMASRn TE */
/*
* PCI Software Configuration Registers
*/
-typedef struct pciconf8349 {
- u32 config_address;
+typedef struct pciconf83xx {
+ u32 config_address;
#define PCI_CONFIG_ADDRESS_EN 0x80000000
#define PCI_CONFIG_ADDRESS_BN_SHIFT 16
#define PCI_CONFIG_ADDRESS_BN_MASK 0x00ff0000
@@ -952,235 +1293,788 @@
#define PCI_CONFIG_ADDRESS_RN_MASK 0x000000fc
u32 config_data;
u32 int_ack;
- u8 res[116];
-} pciconf8349_t;
+ u8 res[116];
+} pciconf83xx_t;
/*
* PCI Outbound Translation Register
*/
typedef struct pci_outbound_window {
- u32 potar;
- u8 res0[4];
- u32 pobar;
- u8 res1[4];
- u32 pocmr;
- u8 res2[4];
-} pot8349_t;
+ u32 potar;
+ u8 res0[4];
+ u32 pobar;
+ u8 res1[4];
+ u32 pocmr;
+ u8 res2[4];
+} pot83xx_t;
+
/*
* Sequencer
*/
-typedef struct ios8349 {
- pot8349_t pot[6];
+typedef struct ios83xx {
+ pot83xx_t pot[6];
#define POTAR_TA_MASK 0x000fffff
-#define POBAR_BA_MASK 0x000fffff
-#define POCMR_EN 0x80000000
-#define POCMR_IO 0x40000000 /* 0--memory space 1--I/O space */
-#define POCMR_SE 0x20000000 /* streaming enable */
-#define POCMR_DST 0x10000000 /* 0--PCI1 1--PCI2*/
-#define POCMR_CM_MASK 0x000fffff
-#define POCMR_CM_4G 0x00000000
-#define POCMR_CM_2G 0x00080000
-#define POCMR_CM_1G 0x000C0000
-#define POCMR_CM_512M 0x000E0000
-#define POCMR_CM_256M 0x000F0000
-#define POCMR_CM_128M 0x000F8000
-#define POCMR_CM_64M 0x000FC000
-#define POCMR_CM_32M 0x000FE000
-#define POCMR_CM_16M 0x000FF000
-#define POCMR_CM_8M 0x000FF800
-#define POCMR_CM_4M 0x000FFC00
-#define POCMR_CM_2M 0x000FFE00
-#define POCMR_CM_1M 0x000FFF00
-#define POCMR_CM_512K 0x000FFF80
-#define POCMR_CM_256K 0x000FFFC0
-#define POCMR_CM_128K 0x000FFFE0
-#define POCMR_CM_64K 0x000FFFF0
-#define POCMR_CM_32K 0x000FFFF8
-#define POCMR_CM_16K 0x000FFFFC
-#define POCMR_CM_8K 0x000FFFFE
-#define POCMR_CM_4K 0x000FFFFF
- u8 res0[0x60];
- u32 pmcr;
- u8 res1[4];
- u32 dtcr;
- u8 res2[4];
-} ios8349_t;
+#define POBAR_BA_MASK 0x000fffff
+#define POCMR_EN 0x80000000
+#define POCMR_IO 0x40000000 /* 0--memory space 1--I/O space */
+#define POCMR_SE 0x20000000 /* streaming enable */
+#define POCMR_DST 0x10000000 /* 0--PCI1 1--PCI2 */
+#define POCMR_CM_MASK 0x000fffff
+#define POCMR_CM_4G 0x00000000
+#define POCMR_CM_2G 0x00080000
+#define POCMR_CM_1G 0x000C0000
+#define POCMR_CM_512M 0x000E0000
+#define POCMR_CM_256M 0x000F0000
+#define POCMR_CM_128M 0x000F8000
+#define POCMR_CM_64M 0x000FC000
+#define POCMR_CM_32M 0x000FE000
+#define POCMR_CM_16M 0x000FF000
+#define POCMR_CM_8M 0x000FF800
+#define POCMR_CM_4M 0x000FFC00
+#define POCMR_CM_2M 0x000FFE00
+#define POCMR_CM_1M 0x000FFF00
+#define POCMR_CM_512K 0x000FFF80
+#define POCMR_CM_256K 0x000FFFC0
+#define POCMR_CM_128K 0x000FFFE0
+#define POCMR_CM_64K 0x000FFFF0
+#define POCMR_CM_32K 0x000FFFF8
+#define POCMR_CM_16K 0x000FFFFC
+#define POCMR_CM_8K 0x000FFFFE
+#define POCMR_CM_4K 0x000FFFFF
+ u8 res0[0x60];
+ u32 pmcr;
+ u8 res1[4];
+ u32 dtcr;
+ u8 res2[4];
+} ios83xx_t;
/*
* PCI Controller Control and Status Registers
*/
-typedef struct pcictrl8349 {
- u32 esr;
+typedef struct pcictrl83xx {
+ u32 esr;
#define ESR_MERR 0x80000000
#define ESR_APAR 0x00000400
-#define ESR_PCISERR 0x00000200
-#define ESR_MPERR 0x00000100
-#define ESR_TPERR 0x00000080
-#define ESR_NORSP 0x00000040
-#define ESR_TABT 0x00000020
- u32 ecdr;
+#define ESR_PCISERR 0x00000200
+#define ESR_MPERR 0x00000100
+#define ESR_TPERR 0x00000080
+#define ESR_NORSP 0x00000040
+#define ESR_TABT 0x00000020
+ u32 ecdr;
#define ECDR_APAR 0x00000400
-#define ECDR_PCISERR 0x00000200
-#define ECDR_MPERR 0x00000100
-#define ECDR_TPERR 0x00000080
-#define ECDR_NORSP 0x00000040
-#define ECDR_TABT 0x00000020
+#define ECDR_PCISERR 0x00000200
+#define ECDR_MPERR 0x00000100
+#define ECDR_TPERR 0x00000080
+#define ECDR_NORSP 0x00000040
+#define ECDR_TABT 0x00000020
u32 eer;
#define EER_APAR 0x00000400
-#define EER_PCISERR 0x00000200
-#define EER_MPERR 0x00000100
-#define EER_TPERR 0x00000080
-#define EER_NORSP 0x00000040
-#define EER_TABT 0x00000020
- u32 eatcr;
-#define EATCR_ERRTYPR_MASK 0x70000000
-#define EATCR_ERRTYPR_APR 0x00000000 /* address parity error */
-#define EATCR_ERRTYPR_WDPR 0x10000000 /* write data parity error */
-#define EATCR_ERRTYPR_RDPR 0x20000000 /* read data parity error */
-#define EATCR_ERRTYPR_MA 0x30000000 /* master abort */
-#define EATCR_ERRTYPR_TA 0x40000000 /* target abort */
-#define EATCR_ERRTYPR_SE 0x50000000 /* system error indication received */
-#define EATCR_ERRTYPR_PEA 0x60000000 /* parity error indication received on a read */
-#define EATCR_ERRTYPR_PEW 0x70000000 /* parity error indication received on a write */
+#define EER_PCISERR 0x00000200
+#define EER_MPERR 0x00000100
+#define EER_TPERR 0x00000080
+#define EER_NORSP 0x00000040
+#define EER_TABT 0x00000020
+ u32 eatcr;
+#define EATCR_ERRTYPR_MASK 0x70000000
+#define EATCR_ERRTYPR_APR 0x00000000 /* address parity error */
+#define EATCR_ERRTYPR_WDPR 0x10000000 /* write data parity error */
+#define EATCR_ERRTYPR_RDPR 0x20000000 /* read data parity error */
+#define EATCR_ERRTYPR_MA 0x30000000 /* master abort */
+#define EATCR_ERRTYPR_TA 0x40000000 /* target abort */
+#define EATCR_ERRTYPR_SE 0x50000000 /* system error indication received */
+#define EATCR_ERRTYPR_PEA 0x60000000 /* parity error indication received on a read */
+#define EATCR_ERRTYPR_PEW 0x70000000 /* parity error indication received on a write */
#define EATCR_BN_MASK 0x0f000000 /* beat number */
-#define EATCR_BN_1st 0x00000000
-#define EATCR_BN_2ed 0x01000000
-#define EATCR_BN_3rd 0x02000000
-#define EATCR_BN_4th 0x03000000
-#define EATCR_BN_5th 0x0400000
-#define EATCR_BN_6th 0x05000000
-#define EATCR_BN_7th 0x06000000
-#define EATCR_BN_8th 0x07000000
-#define EATCR_BN_9th 0x08000000
+#define EATCR_BN_1st 0x00000000
+#define EATCR_BN_2ed 0x01000000
+#define EATCR_BN_3rd 0x02000000
+#define EATCR_BN_4th 0x03000000
+#define EATCR_BN_5th 0x0400000
+#define EATCR_BN_6th 0x05000000
+#define EATCR_BN_7th 0x06000000
+#define EATCR_BN_8th 0x07000000
+#define EATCR_BN_9th 0x08000000
#define EATCR_TS_MASK 0x00300000 /* transaction size */
-#define EATCR_TS_4 0x00000000
-#define EATCR_TS_1 0x00100000
-#define EATCR_TS_2 0x00200000
-#define EATCR_TS_3 0x00300000
-#define EATCR_ES_MASK 0x000f0000 /* error source */
-#define EATCR_ES_EM 0x00000000 /* external master */
-#define EATCR_ES_DMA 0x00050000
-#define EATCR_CMD_MASK 0x0000f000
-#define EATCR_HBE_MASK 0x00000f00 /* PCI high byte enable*/
-#define EATCR_BE_MASK 0x000000f0 /* PCI byte enable */
-#define EATCR_HPB 0x00000004 /* high parity bit */
-#define EATCR_PB 0x00000002 /* parity bit*/
-#define EATCR_VI 0x00000001 /* error information valid */
- u32 eacr;
- u32 eeacr;
- u32 edlcr;
- u32 edhcr;
- u32 gcr;
- u32 ecr;
- u32 gsr;
- u8 res0[12];
- u32 pitar2;
- u8 res1[4];
- u32 pibar2;
- u32 piebar2;
- u32 piwar2;
- u8 res2[4];
- u32 pitar1;
- u8 res3[4];
- u32 pibar1;
- u32 piebar1;
- u32 piwar1;
- u8 res4[4];
- u32 pitar0;
- u8 res5[4];
- u32 pibar0;
- u8 res6[4];
- u32 piwar0;
- u8 res7[132];
+#define EATCR_TS_4 0x00000000
+#define EATCR_TS_1 0x00100000
+#define EATCR_TS_2 0x00200000
+#define EATCR_TS_3 0x00300000
+#define EATCR_ES_MASK 0x000f0000 /* error source */
+#define EATCR_ES_EM 0x00000000 /* external master */
+#define EATCR_ES_DMA 0x00050000
+#define EATCR_CMD_MASK 0x0000f000
+#if defined (CONFIG_MPC8349)
+#define EATCR_HBE_MASK 0x00000f00 /* PCI high byte enable */
+#endif
+#define EATCR_BE_MASK 0x000000f0 /* PCI byte enable */
+#if defined (CONFIG_MPC8349)
+#define EATCR_HPB 0x00000004 /* high parity bit */
+#endif
+#define EATCR_PB 0x00000002 /* parity bit */
+#define EATCR_VI 0x00000001 /* error information valid */
+ u32 eacr;
+ u32 eeacr;
+#if defined (CONFIG_MPC8349)
+ u32 edlcr;
+ u32 edhcr;
+#elif defined (CONFIG_MPC8360)
+ u32 edcr; /* was edlcr */
+ u8 res_edcr[0x4];
+#endif
+ u32 gcr;
+ u32 ecr;
+ u32 gsr;
+ u8 res0[12];
+ u32 pitar2;
+ u8 res1[4];
+ u32 pibar2;
+ u32 piebar2;
+ u32 piwar2;
+ u8 res2[4];
+ u32 pitar1;
+ u8 res3[4];
+ u32 pibar1;
+ u32 piebar1;
+ u32 piwar1;
+ u8 res4[4];
+ u32 pitar0;
+ u8 res5[4];
+ u32 pibar0;
+ u8 res6[4];
+ u32 piwar0;
+ u8 res7[132];
#define PITAR_TA_MASK 0x000fffff
#define PIBAR_MASK 0xffffffff
#define PIEBAR_EBA_MASK 0x000fffff
#define PIWAR_EN 0x80000000
#define PIWAR_PF 0x20000000
-#define PIWAR_RTT_MASK 0x000f0000
-#define PIWAR_RTT_NO_SNOOP 0x00040000
+#define PIWAR_RTT_MASK 0x000f0000
+#define PIWAR_RTT_NO_SNOOP 0x00040000
#define PIWAR_RTT_SNOOP 0x00050000
-#define PIWAR_WTT_MASK 0x0000f000
-#define PIWAR_WTT_NO_SNOOP 0x00004000
+#define PIWAR_WTT_MASK 0x0000f000
+#define PIWAR_WTT_NO_SNOOP 0x00004000
#define PIWAR_WTT_SNOOP 0x00005000
-#define PIWAR_IWS_MASK 0x0000003F
-#define PIWAR_IWS_4K 0x0000000B
-#define PIWAR_IWS_8K 0x0000000C
-#define PIWAR_IWS_16K 0x0000000D
-#define PIWAR_IWS_32K 0x0000000E
-#define PIWAR_IWS_64K 0x0000000F
-#define PIWAR_IWS_128K 0x00000010
-#define PIWAR_IWS_256K 0x00000011
-#define PIWAR_IWS_512K 0x00000012
-#define PIWAR_IWS_1M 0x00000013
-#define PIWAR_IWS_2M 0x00000014
-#define PIWAR_IWS_4M 0x00000015
-#define PIWAR_IWS_8M 0x00000016
-#define PIWAR_IWS_16M 0x00000017
-#define PIWAR_IWS_32M 0x00000018
-#define PIWAR_IWS_64M 0x00000019
-#define PIWAR_IWS_128M 0x0000001A
-#define PIWAR_IWS_256M 0x0000001B
-#define PIWAR_IWS_512M 0x0000001C
-#define PIWAR_IWS_1G 0x0000001D
-#define PIWAR_IWS_2G 0x0000001E
-} pcictrl8349_t;
+#define PIWAR_IWS_MASK 0x0000003F
+#define PIWAR_IWS_4K 0x0000000B
+#define PIWAR_IWS_8K 0x0000000C
+#define PIWAR_IWS_16K 0x0000000D
+#define PIWAR_IWS_32K 0x0000000E
+#define PIWAR_IWS_64K 0x0000000F
+#define PIWAR_IWS_128K 0x00000010
+#define PIWAR_IWS_256K 0x00000011
+#define PIWAR_IWS_512K 0x00000012
+#define PIWAR_IWS_1M 0x00000013
+#define PIWAR_IWS_2M 0x00000014
+#define PIWAR_IWS_4M 0x00000015
+#define PIWAR_IWS_8M 0x00000016
+#define PIWAR_IWS_16M 0x00000017
+#define PIWAR_IWS_32M 0x00000018
+#define PIWAR_IWS_64M 0x00000019
+#define PIWAR_IWS_128M 0x0000001A
+#define PIWAR_IWS_256M 0x0000001B
+#define PIWAR_IWS_512M 0x0000001C
+#define PIWAR_IWS_1G 0x0000001D
+#define PIWAR_IWS_2G 0x0000001E
+} pcictrl83xx_t;
+#if defined (CONFIG_MPC8349)
/*
* USB
*/
-typedef struct usb8349 {
+typedef struct usb83xx {
u8 fixme[0x2000];
-} usb8349_t;
+} usb83xx_t;
/*
* TSEC
*/
-typedef struct tsec8349 {
+typedef struct tsec83xx {
u8 fixme[0x1000];
-} tsec8349_t;
+} tsec83xx_t;
+#endif
/*
* Security
*/
-typedef struct security8349 {
+typedef struct security83xx {
u8 fixme[0x10000];
-} security8349_t;
+} security83xx_t;
+
+#if defined (CONFIG_MPC8360)
+/*
+ * iram
+ */
+typedef struct iram83xx {
+ u32 iadd; /* I-RAM address register */
+ u32 idata; /* I-RAM data register */
+ u8 res0[0x78];
+} iram83xx_t;
+
+/*
+ * Interrupt Controller
+ */
+typedef struct irq83xx {
+ u32 cicr; /* QE system interrupt configuration */
+ u32 civec; /* QE system interrupt vector register */
+ u32 cripnr; /* QE RISC interrupt pending register */
+ u32 cipnr; /* QE system interrupt pending register */
+ u32 cipxcc; /* QE interrupt priority register */
+ u32 cipycc; /* QE interrupt priority register */
+ u32 cipwcc; /* QE interrupt priority register */
+ u32 cipzcc; /* QE interrupt priority register */
+ u32 cimr; /* QE system interrupt mask register */
+ u32 crimr; /* QE RISC interrupt mask register */
+ u32 cicnr; /* QE system interrupt control register */
+ u8 res0[0x4];
+ u32 ciprta; /* QE system interrupt priority register for RISC tasks A */
+ u32 ciprtb; /* QE system interrupt priority register for RISC tasks B */
+ u8 res1[0x4];
+ u32 cricr; /* QE system RISC interrupt control */
+ u8 res2[0x20];
+ u32 chivec; /* QE high system interrupt vector */
+ u8 res3[0x1C];
+} irq83xx_t;
+
+/*
+ * Communications Processor
+ */
+typedef struct cp83xx {
+ u32 cecr; /* QE command register */
+ u32 ceccr; /* QE controller configuration register */
+ u32 cecdr; /* QE command data register */
+ u8 res0[0xA];
+ u16 ceter; /* QE timer event register */
+ u8 res1[0x2];
+ u16 cetmr; /* QE timers mask register */
+ u32 cetscr; /* QE time-stamp timer control register */
+ u32 cetsr1; /* QE time-stamp register 1 */
+ u32 cetsr2; /* QE time-stamp register 2 */
+ u8 res2[0x8];
+ u32 cevter; /* QE virtual tasks event register */
+ u32 cevtmr; /* QE virtual tasks mask register */
+ u16 cercr; /* QE RAM control register */
+ u8 res3[0x2];
+ u8 res4[0x24];
+ u16 ceexe1; /* QE external request 1 event register */
+ u8 res5[0x2];
+ u16 ceexm1; /* QE external request 1 mask register */
+ u8 res6[0x2];
+ u16 ceexe2; /* QE external request 2 event register */
+ u8 res7[0x2];
+ u16 ceexm2; /* QE external request 2 mask register */
+ u8 res8[0x2];
+ u16 ceexe3; /* QE external request 3 event register */
+ u8 res9[0x2];
+ u16 ceexm3; /* QE external request 3 mask register */
+ u8 res10[0x2];
+ u16 ceexe4; /* QE external request 4 event register */
+ u8 res11[0x2];
+ u16 ceexm4; /* QE external request 4 mask register */
+ u8 res12[0x2];
+ u8 res13[0x280];
+} cp83xx_t;
+
+/*
+ * QE Multiplexer
+ */
+
+typedef struct qmx83xx {
+ u32 cmxgcr; /* CMX general clock route register */
+ u32 cmxsi1cr_l; /* CMX SI1 clock route low register */
+ u32 cmxsi1cr_h; /* CMX SI1 clock route high register */
+ u32 cmxsi1syr; /* CMX SI1 SYNC route register */
+ u32 cmxucr1; /* CMX UCC1, UCC3 clock route register */
+ u32 cmxucr2; /* CMX UCC5, UCC7 clock route register */
+ u32 cmxucr3; /* CMX UCC2, UCC4 clock route register */
+ u32 cmxucr4; /* CMX UCC6, UCC8 clock route register */
+ u32 cmxupcr; /* CMX UPC clock route register */
+ u8 res0[0x1C];
+} qmx83xx_t;
+
+/*
+* QE Timers
+*/
+
+typedef struct qet83xx {
+ u8 gtcfr1; /* Timer 1 and Timer 2 global configuration register */
+ u8 res0[0x3];
+ u8 gtcfr2; /* Timer 3 and timer 4 global configuration register */
+ u8 res1[0xB];
+ u16 gtmdr1; /* Timer 1 mode register */
+ u16 gtmdr2; /* Timer 2 mode register */
+ u16 gtrfr1; /* Timer 1 reference register */
+ u16 gtrfr2; /* Timer 2 reference register */
+ u16 gtcpr1; /* Timer 1 capture register */
+ u16 gtcpr2; /* Timer 2 capture register */
+ u16 gtcnr1; /* Timer 1 counter */
+ u16 gtcnr2; /* Timer 2 counter */
+ u16 gtmdr3; /* Timer 3 mode register */
+ u16 gtmdr4; /* Timer 4 mode register */
+ u16 gtrfr3; /* Timer 3 reference register */
+ u16 gtrfr4; /* Timer 4 reference register */
+ u16 gtcpr3; /* Timer 3 capture register */
+ u16 gtcpr4; /* Timer 4 capture register */
+ u16 gtcnr3; /* Timer 3 counter */
+ u16 gtcnr4; /* Timer 4 counter */
+ u16 gtevr1; /* Timer 1 event register */
+ u16 gtevr2; /* Timer 2 event register */
+ u16 gtevr3; /* Timer 3 event register */
+ u16 gtevr4; /* Timer 4 event register */
+ u16 gtps; /* Timer 1 prescale register */
+ u8 res2[0x46];
+} qet83xx_t;
+
+/*
+* spi
+*/
+
+typedef struct spi83xx {
+ u8 res0[0x20];
+ u32 spmode; /* SPI mode register */
+ u8 res1[0x2];
+ u8 spie; /* SPI event register */
+ u8 res2[0x1];
+ u8 res3[0x2];
+ u8 spim; /* SPI mask register */
+ u8 res4[0x1];
+ u8 res5[0x1];
+ u8 spcom; /* SPI command register */
+ u8 res6[0x2];
+ u32 spitd; /* SPI transmit data register (cpu mode) */
+ u32 spird; /* SPI receive data register (cpu mode) */
+ u8 res7[0x8];
+} spi83xx_t;
+
+/*
+* mcc
+*/
+
+typedef struct mcc83xx {
+ u32 mcce; /* MCC event register */
+ u32 mccm; /* MCC mask register */
+ u32 mccf; /* MCC configuration register */
+ u32 merl; /* MCC emergency request level register */
+ u8 res0[0xF0];
+} mcc83xx_t;
+
+/*
+* brg
+*/
+
+typedef struct brg83xx {
+ u32 brgc1; /* BRG1 configuration register */
+ u32 brgc2; /* BRG2 configuration register */
+ u32 brgc3; /* BRG3 configuration register */
+ u32 brgc4; /* BRG4 configuration register */
+ u32 brgc5; /* BRG5 configuration register */
+ u32 brgc6; /* BRG6 configuration register */
+ u32 brgc7; /* BRG7 configuration register */
+ u32 brgc8; /* BRG8 configuration register */
+ u32 brgc9; /* BRG9 configuration register */
+ u32 brgc10; /* BRG10 configuration register */
+ u32 brgc11; /* BRG11 configuration register */
+ u32 brgc12; /* BRG12 configuration register */
+ u32 brgc13; /* BRG13 configuration register */
+ u32 brgc14; /* BRG14 configuration register */
+ u32 brgc15; /* BRG15 configuration register */
+ u32 brgc16; /* BRG16 configuration register */
+ u8 res0[0x40];
+} brg83xx_t;
+
+/*
+* USB
+*/
+
+typedef struct usb83xx {
+ u8 usmod; /* USB mode register */
+ u8 usadd; /* USB address register */
+ u8 uscom; /* USB command register */
+ u8 res0[0x1];
+ u16 usep0; /* USB endpoint register 0 */
+ u16 usep1; /* USB endpoint register 1 */
+ u16 usep2; /* USB endpoint register 2 */
+ u16 usep3; /* USB endpoint register 3 */
+ u8 res1[0x4];
+ u16 usber; /* USB event register */
+ u8 res2[0x2];
+ u16 usbmr; /* USB mask register */
+ u8 res3[0x1];
+ u8 usbs; /* USB status register */
+ u32 ussft; /* USB start of frame timer */
+ u8 res4[0x24];
+} usb83xx_t;
+
+/*
+* SI
+*/
+
+typedef struct si1_83xx {
+ u16 siamr1; /* SI1 TDMA mode register */
+ u16 sibmr1; /* SI1 TDMB mode register */
+ u16 sicmr1; /* SI1 TDMC mode register */
+ u16 sidmr1; /* SI1 TDMD mode register */
+ u8 siglmr1_h; /* SI1 global mode register high */
+ u8 res0[0x1];
+ u8 sicmdr1_h; /* SI1 command register high */
+ u8 res2[0x1];
+ u8 sistr1_h; /* SI1 status register high */
+ u8 res3[0x1];
+ u16 sirsr1_h; /* SI1 RAM shadow address register high */
+ u8 sitarc1; /* SI1 RAM counter Tx TDMA */
+ u8 sitbrc1; /* SI1 RAM counter Tx TDMB */
+ u8 sitcrc1; /* SI1 RAM counter Tx TDMC */
+ u8 sitdrc1; /* SI1 RAM counter Tx TDMD */
+ u8 sirarc1; /* SI1 RAM counter Rx TDMA */
+ u8 sirbrc1; /* SI1 RAM counter Rx TDMB */
+ u8 sircrc1; /* SI1 RAM counter Rx TDMC */
+ u8 sirdrc1; /* SI1 RAM counter Rx TDMD */
+ u8 res4[0x8];
+ u16 siemr1; /* SI1 TDME mode register 16 bits */
+ u16 sifmr1; /* SI1 TDMF mode register 16 bits */
+ u16 sigmr1; /* SI1 TDMG mode register 16 bits */
+ u16 sihmr1; /* SI1 TDMH mode register 16 bits */
+ u8 siglmg1_l; /* SI1 global mode register low 8 bits */
+ u8 res5[0x1];
+ u8 sicmdr1_l; /* SI1 command register low 8 bits */
+ u8 res6[0x1];
+ u8 sistr1_l; /* SI1 status register low 8 bits */
+ u8 res7[0x1];
+ u16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits */
+ u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */
+ u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */
+ u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */
+ u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */
+ u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */
+ u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */
+ u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */
+ u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */
+ u8 res8[0x8];
+ u32 siml1; /* SI1 multiframe limit register */
+ u8 siedm1; /* SI1 extended diagnostic mode register */
+ u8 res9[0xBB];
+} si1_83xx_t;
+
+/*
+* SI Routing Tables
+*/
+
+typedef struct sir83xx {
+ u8 tx[0x400];
+ u8 rx[0x400];
+ u8 res0[0x800];
+} sir83xx_t;
+
+/*
+* ucc
+*/
+
+typedef struct uslow {
+ u32 gumr_l; /* UCCx general mode register (low) */
+ u32 gumr_h; /* UCCx general mode register (high) */
+ u16 upsmr; /* UCCx protocol-specific mode register */
+ u8 res0[0x2];
+ u16 utodr; /* UCCx transmit on demand register */
+ u16 udsr; /* UCCx data synchronization register */
+ u16 ucce; /* UCCx event register */
+ u8 res1[0x2];
+ u16 uccm; /* UCCx mask register */
+ u8 res2[0x1];
+ u8 uccs; /* UCCx status register */
+ u8 res3[0x1E8];
+} uslow_t;
+
+typedef struct ufast {
+ u32 gumr; /* UCCx general mode register */
+ u32 upsmr; /* UCCx protocol-specific mode register */
+ u16 utodr; /* UCCx transmit on demand register */
+ u8 res0[0x2];
+ u16 udsr; /* UCCx data synchronization register */
+ u8 res1[0x2];
+ u32 ucce; /* UCCx event register */
+ u32 uccm; /* UCCx mask register. */
+ u8 uccs; /* UCCx status register */
+ u8 res2[0x7];
+ u32 urfb; /* UCC receive FIFO base */
+ u16 urfs; /* UCC receive FIFO size */
+ u8 res3[0x2];
+ u16 urfet; /* UCC receive FIFO emergency threshold */
+ u16 urfset; /* UCC receive FIFO special emergency threshold */
+ u32 utfb; /* UCC transmit FIFO base */
+ u16 utfs; /* UCC transmit FIFO size */
+ u8 res4[0x2];
+ u16 utfet; /* UCC transmit FIFO emergency threshold */
+ u8 res5[0x2];
+ u16 utftt; /* UCC transmit FIFO transmit threshold */
+ u8 res6[0x2];
+ u16 utpt; /* UCC transmit polling timer */
+ u32 urtry; /* UCC retry counter register */
+ u8 res7[0x4C];
+ u8 guemr; /* UCC general extended mode register */
+ u8 res8[0x3];
+ u8 res9[0x6C];
+ u32 maccfg1; /* Mac configuration register #1 */
+ u32 maccfg2; /* Mac configuration register #2 */
+ u16 ipgifg; /* Interframe gap register */
+ u8 res10[0x2];
+ u32 hafdup; /* Half-duplex register */
+ u8 res11[0xC];
+ u32 emtr; /* Ethernet MAC test register */
+ u32 miimcfg; /* MII mgmt configuration register */
+ u32 miimcom; /* MII mgmt command register */
+ u32 miimadd; /* MII mgmt address register */
+ u32 miimcon; /* MII mgmt control register */
+ u32 miistat; /* MII mgmt status register */
+ u32 miimnd; /* MII mgmt indication register */
+ u32 ifctl; /* Interface control register */
+ u32 ifstat; /* Interface status register */
+ u32 macstnaddr1; /* Station address part 1 register */
+ u32 macstnaddr2; /* Station address part 2 register */
+ u8 res12[0x8];
+ u32 uempr; /* UCC Ethernet MAC parameter register */
+ u32 utbipa; /* UCC TBI address */
+ u16 uescr; /* UCC Ethernet statistics control register */
+ u8 res13[0x26];
+ u32 tx64; /* Transmit and receive 64-byte frame counter */
+ u32 tx127; /* Transmit and receive 65- to 127-byte frame counter */
+ u32 tx255; /* Transmit and receive 128- to 255-byte frame counter */
+ u32 rx64; /* Receive and receive 64-byte frame counter */
+ u32 rx127; /* Receive and receive 65- to 127-byte frame counter */
+ u32 rx255; /* Receive and receive 128- to 255-byte frame counter */
+ u32 txok; /* Transmit good bytes counter */
+ u32 txcf; /* Transmit control frame counter */
+ u32 tmca; /* Transmit multicast control frame counter */
+ u32 tbca; /* Transmit broadcast packet counter */
+ u32 rxfok; /* Receive frame OK counter */
+ u32 rbyt; /* Receive good and bad bytes counter */
+ u32 rxbok; /* Receive bytes OK counter */
+ u32 rmca; /* Receive multicast packet counter */
+ u32 rbca; /* Receive broadcast packet counter */
+ u32 scar; /* Statistics carry register */
+ u32 scam; /* Statistics carry mask register */
+ u8 res14[0x3C];
+} ufast_t;
+
+typedef struct ucc83xx {
+ union {
+ uslow_t slow;
+ ufast_t fast;
+ };
+} ucc83xx_t;
+
+/*
+* MultiPHY UTOPIA POS Controllers
+*/
+
+typedef struct upc83xx {
+ u32 upgcr; /* UTOPIA/POS general configuration register */
+#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */
+#define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */
+#define UPGCR_RMS 0x20000000 /* Receive master/slave mode */
+#define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing: */
+#define UPGCR_DIAG 0x01000000 /* Diagnostic mode */
+ u32 uplpa; /* UTOPIA/POS last PHY address */
+ u32 uphec; /* ATM HEC register */
+ u32 upuc; /* UTOPIA/POS UCC configuration */
+ u32 updc1; /* UTOPIA/POS device 1 configuration */
+ u32 updc2; /* UTOPIA/POS device 2 configuration */
+ u32 updc3; /* UTOPIA/POS device 3 configuration */
+ u32 updc4; /* UTOPIA/POS device 4 configuration */
+ u32 upstpa; /* UTOPIA/POS STPA threshold */
+ u8 res0[0xC];
+ u32 updrs1_h; /* UTOPIA/POS device 1 rate select */
+ u32 updrs1_l; /* UTOPIA/POS device 1 rate select */
+ u32 updrs2_h; /* UTOPIA/POS device 2 rate select */
+ u32 updrs2_l; /* UTOPIA/POS device 2 rate select */
+ u32 updrs3_h; /* UTOPIA/POS device 3 rate select */
+ u32 updrs3_l; /* UTOPIA/POS device 3 rate select */
+ u32 updrs4_h; /* UTOPIA/POS device 4 rate select */
+ u32 updrs4_l; /* UTOPIA/POS device 4 rate select */
+ u32 updrp1; /* UTOPIA/POS device 1 receive priority low */
+ u32 updrp2; /* UTOPIA/POS device 2 receive priority low */
+ u32 updrp3; /* UTOPIA/POS device 3 receive priority low */
+ u32 updrp4; /* UTOPIA/POS device 4 receive priority low */
+ u32 upde1; /* UTOPIA/POS device 1 event */
+ u32 upde2; /* UTOPIA/POS device 2 event */
+ u32 upde3; /* UTOPIA/POS device 3 event */
+ u32 upde4; /* UTOPIA/POS device 4 event */
+ u16 uprp1;
+ u16 uprp2;
+ u16 uprp3;
+ u16 uprp4;
+ u8 res1[0x8];
+ u16 uptirr1_0; /* Device 1 transmit internal rate 0 */
+ u16 uptirr1_1; /* Device 1 transmit internal rate 1 */
+ u16 uptirr1_2; /* Device 1 transmit internal rate 2 */
+ u16 uptirr1_3; /* Device 1 transmit internal rate 3 */
+ u16 uptirr2_0; /* Device 2 transmit internal rate 0 */
+ u16 uptirr2_1; /* Device 2 transmit internal rate 1 */
+ u16 uptirr2_2; /* Device 2 transmit internal rate 2 */
+ u16 uptirr2_3; /* Device 2 transmit internal rate 3 */
+ u16 uptirr3_0; /* Device 3 transmit internal rate 0 */
+ u16 uptirr3_1; /* Device 3 transmit internal rate 1 */
+ u16 uptirr3_2; /* Device 3 transmit internal rate 2 */
+ u16 uptirr3_3; /* Device 3 transmit internal rate 3 */
+ u16 uptirr4_0; /* Device 4 transmit internal rate 0 */
+ u16 uptirr4_1; /* Device 4 transmit internal rate 1 */
+ u16 uptirr4_2; /* Device 4 transmit internal rate 2 */
+ u16 uptirr4_3; /* Device 4 transmit internal rate 3 */
+ u32 uper1; /* Device 1 port enable register */
+ u32 uper2; /* Device 2 port enable register */
+ u32 uper3; /* Device 3 port enable register */
+ u32 uper4; /* Device 4 port enable register */
+ u8 res2[0x150];
+} upc83xx_t;
+
+/*
+* SDMA
+*/
+
+typedef struct sdma83xx {
+ u32 sdsr; /* Serial DMA status register */
+ u32 sdmr; /* Serial DMA mode register */
+ u32 sdtr1; /* SDMA system bus threshold register */
+ u32 sdtr2; /* SDMA secondary bus threshold register */
+ u32 sdhy1; /* SDMA system bus hysteresis register */
+ u32 sdhy2; /* SDMA secondary bus hysteresis register */
+ u32 sdta1; /* SDMA system bus address register */
+ u32 sdta2; /* SDMA secondary bus address register */
+ u32 sdtm1; /* SDMA system bus MSNUM register */
+ u32 sdtm2; /* SDMA secondary bus MSNUM register */
+ u8 res0[0x10];
+ u32 sdaqr; /* SDMA address bus qualify register */
+ u32 sdaqmr; /* SDMA address bus qualify mask register */
+ u8 res1[0x4];
+ u32 sdwbcr; /* SDMA CAM entries base register */
+ u8 res2[0x38];
+} sdma83xx_t;
+
+/*
+* Debug Space
+*/
+
+typedef struct dbg83xx {
+ u32 bpdcr; /* Breakpoint debug command register */
+ u32 bpdsr; /* Breakpoint debug status register */
+ u32 bpdmr; /* Breakpoint debug mask register */
+ u32 bprmrr0; /* Breakpoint request mode risc register 0 */
+ u32 bprmrr1; /* Breakpoint request mode risc register 1 */
+ u8 res0[0x8];
+ u32 bprmtr0; /* Breakpoint request mode trb register 0 */
+ u32 bprmtr1; /* Breakpoint request mode trb register 1 */
+ u8 res1[0x8];
+ u32 bprmir; /* Breakpoint request mode immediate register */
+ u32 bprmsr; /* Breakpoint request mode serial register */
+ u32 bpemr; /* Breakpoint exit mode register */
+ u8 res2[0x48];
+} dbg83xx_t;
+
+/*
+* RISC Special Registers (Trap and Breakpoint)
+*/
+
+typedef struct rsp83xx {
+ u8 fixme[0x100];
+} rsp83xx_t;
+#endif
typedef struct immap {
- sysconf8349_t sysconf; /* System configuration */
- wdt8349_t wdt; /* Watch Dog Timer (WDT) Registers */
- rtclk8349_t rtc; /* Real Time Clock Module Registers */
- rtclk8349_t pit; /* Periodic Interval Timer */
- gtm8349_t gtm[2]; /* Global Timers Module */
- ipic8349_t ipic; /* Integrated Programmable Interrupt Controller */
- arbiter8349_t arbiter; /* System Arbiter Registers */
- reset8349_t reset; /* Reset Module */
- clk8349_t clk; /* System Clock Module */
- pmc8349_t pmc; /* Power Management Control Module */
- gpio8349_t pgio[2]; /* general purpose I/O module */
+ sysconf83xx_t sysconf; /* System configuration */
+ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
+ rtclk83xx_t rtc; /* Real Time Clock Module Registers */
+ rtclk83xx_t pit; /* Periodic Interval Timer */
+ gtm83xx_t gtm[2]; /* Global Timers Module */
+ ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */
+ arbiter83xx_t arbiter; /* System Arbiter Registers */
+ reset83xx_t reset; /* Reset Module */
+ clk83xx_t clk; /* System Clock Module */
+ pmc83xx_t pmc; /* Power Management Control Module */
+#if defined (CONFIG_MPC8349)
+ gpio83xx_t pgio[2]; /* general purpose I/O module */
+#elif defined (CONFIG_MPC8360)
+ qepi83xx_t qepi; /* QE Ports Interrupts Registers */
+#endif
u8 res0[0x200];
+#if defined (CONFIG_MPC8360)
+ u8 DLL_LBDDR[0x100];
+#endif
u8 DDL_DDR[0x100];
u8 DDL_LBIU[0x100];
+#if defined (CONFIG_MPC8349)
u8 res1[0xE00];
- ddr8349_t ddr; /* DDR Memory Controller Memory */
- i2c_t i2c[2]; /* I2C1 Controller */
+#elif defined (CONFIG_MPC8360)
+ u8 res1[0x200];
+ gpio83xx_t gpio; /* General purpose I/O module */
+ qesba83xx_t qesba; /* QE Secondary Bus Access Windows */
+#endif
+ ddr83xx_t ddr; /* DDR Memory Controller Memory */
+ fsl_i2c_t i2c[2]; /* I2C Controllers */
u8 res2[0x1300];
- duart8349_t duart[2];/* DUART */
+ duart83xx_t duart[2]; /* DUART */
+#if defined (CONFIG_MPC8349)
u8 res3[0x900];
- lbus8349_t lbus; /* Local Bus Controller Registers */
+ lbus83xx_t lbus; /* Local Bus Controller Registers */
u8 res4[0x1000];
- spi8349_t spi; /* Serial Peripheral Interface */
+ spi83xx_t spi; /* Serial Peripheral Interface */
u8 res5[0xF00];
- dma8349_t dma; /* DMA */
- pciconf8349_t pci_conf[2]; /* PCI Software Configuration Registers */
- ios8349_t ios; /* Sequencer */
- pcictrl8349_t pci_ctrl[2]; /* PCI Controller Control and Status Registers */
+#elif defined (CONFIG_MPC8360)
+ u8 res3[0x900];
+ lbus83xx_t lbus; /* Local Bus Controller */
+ u8 res4[0x2000];
+#endif
+ dma83xx_t dma; /* DMA */
+#if defined (CONFIG_MPC8349)
+ pciconf83xx_t pci_conf[2]; /* PCI Software Configuration Registers */
+ ios83xx_t ios; /* Sequencer */
+ pcictrl83xx_t pci_ctrl[2]; /* PCI Controller Control and Status Registers */
u8 res6[0x19900];
- usb8349_t usb;
- tsec8349_t tsec[2];
+ usb83xx_t usb;
+ tsec83xx_t tsec[2];
u8 res7[0xA000];
- security8349_t security;
+ security83xx_t security;
+#elif defined (CONFIG_MPC8360)
+ pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */
+ u8 res_5[128];
+ ios83xx_t ios; /* Sequencer (IOS) */
+ pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */
+ u8 res6[0x4A00];
+ ddr83xx_t ddr_secondary; /* Secondary DDR Memory Controller Memory Map */
+ u8 res7[0x22000];
+ security83xx_t security;
+ u8 res8[0xC0000];
+ iram83xx_t iram; /* IRAM */
+ irq83xx_t irq; /* Interrupt Controller */
+ cp83xx_t cp; /* Communications Processor */
+ qmx83xx_t qmx; /* QE Multiplexer */
+ qet83xx_t qet; /* QE Timers */
+ spi83xx_t spi[0x2]; /* spi */
+ mcc83xx_t mcc; /* mcc */
+ brg83xx_t brg; /* brg */
+ usb83xx_t usb; /* USB */
+ si1_83xx_t si1; /* SI */
+ u8 res9[0x800];
+ sir83xx_t sir; /* SI Routing Tables */
+ ucc83xx_t ucc1; /* ucc1 */
+ ucc83xx_t ucc3; /* ucc3 */
+ ucc83xx_t ucc5; /* ucc5 */
+ ucc83xx_t ucc7; /* ucc7 */
+ u8 res10[0x600];
+ upc83xx_t upc1; /* MultiPHY UTOPIA POS Controller 1 */
+ ucc83xx_t ucc2; /* ucc2 */
+ ucc83xx_t ucc4; /* ucc4 */
+ ucc83xx_t ucc6; /* ucc6 */
+ ucc83xx_t ucc8; /* ucc8 */
+ u8 res11[0x600];
+ upc83xx_t upc2; /* MultiPHY UTOPIA POS Controller 2 */
+ sdma83xx_t sdma; /* SDMA */
+ dbg83xx_t dbg; /* Debug Space */
+ rsp83xx_t rsp[0x2]; /* RISC Special Registers (Trap and Breakpoint) */
+ u8 res12[0x300];
+ u8 res13[0x3A00];
+ u8 res14[0x8000]; /* 0x108000 - 0x110000 */
+ u8 res15[0xC000]; /* 0x110000 - 0x11C000 Multi-user RAM */
+ u8 res16[0x24000]; /* 0x11C000 - 0x140000 */
+ u8 res17[0xC0000]; /* 0x140000 - 0x200000 */
+#endif
} immap_t;
-#endif /* __IMMAP_8349__ */
+#endif /* __IMMAP_83xx__ */
diff --git a/include/asm-ppc/immap_qe.h b/include/asm-ppc/immap_qe.h
new file mode 100644
index 0000000..f385032
--- /dev/null
+++ b/include/asm-ppc/immap_qe.h
@@ -0,0 +1,550 @@
+/*
+ * QUICC Engine (QE) Internal Memory Map.
+ * The Internal Memory Map for devices with QE on them. This
+ * is the superset of all QE devices (8360, etc.).
+ *
+ * Copyright (c) 2006 Freescale Semiconductor, Inc.
+ * Author: Shlomi Gridih <gridish@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __IMMAP_QE_H__
+#define __IMMAP_QE_H__
+
+/* QE I-RAM
+*/
+typedef struct qe_iram {
+ u32 iadd; /* I-RAM Address Register */
+ u32 idata; /* I-RAM Data Register */
+ u8 res0[0x78];
+} __attribute__ ((packed)) qe_iram_t;
+
+/* QE Interrupt Controller
+*/
+typedef struct qe_ic {
+ u32 qicr;
+ u32 qivec;
+ u32 qripnr;
+ u32 qipnr;
+ u32 qipxcc;
+ u32 qipycc;
+ u32 qipwcc;
+ u32 qipzcc;
+ u32 qimr;
+ u32 qrimr;
+ u32 qicnr;
+ u8 res0[0x4];
+ u32 qiprta;
+ u32 qiprtb;
+ u8 res1[0x4];
+ u32 qricr;
+ u8 res2[0x20];
+ u32 qhivec;
+ u8 res3[0x1C];
+} __attribute__ ((packed)) qe_ic_t;
+
+/* Communications Processor
+*/
+typedef struct cp_qe {
+ u32 cecr; /* QE command register */
+ u32 ceccr; /* QE controller configuration register */
+ u32 cecdr; /* QE command data register */
+ u8 res0[0xA];
+ u16 ceter; /* QE timer event register */
+ u8 res1[0x2];
+ u16 cetmr; /* QE timers mask register */
+ u32 cetscr; /* QE time-stamp timer control register */
+ u32 cetsr1; /* QE time-stamp register 1 */
+ u32 cetsr2; /* QE time-stamp register 2 */
+ u8 res2[0x8];
+ u32 cevter; /* QE virtual tasks event register */
+ u32 cevtmr; /* QE virtual tasks mask register */
+ u16 cercr; /* QE RAM control register */
+ u8 res3[0x2];
+ u8 res4[0x24];
+ u16 ceexe1; /* QE external request 1 event register */
+ u8 res5[0x2];
+ u16 ceexm1; /* QE external request 1 mask register */
+ u8 res6[0x2];
+ u16 ceexe2; /* QE external request 2 event register */
+ u8 res7[0x2];
+ u16 ceexm2; /* QE external request 2 mask register */
+ u8 res8[0x2];
+ u16 ceexe3; /* QE external request 3 event register */
+ u8 res9[0x2];
+ u16 ceexm3; /* QE external request 3 mask register */
+ u8 res10[0x2];
+ u16 ceexe4; /* QE external request 4 event register */
+ u8 res11[0x2];
+ u16 ceexm4; /* QE external request 4 mask register */
+ u8 res12[0x2];
+ u8 res13[0x280];
+} __attribute__ ((packed)) cp_qe_t;
+
+/* QE Multiplexer
+*/
+typedef struct qe_mux {
+ u32 cmxgcr; /* CMX general clock route register */
+ u32 cmxsi1cr_l; /* CMX SI1 clock route low register */
+ u32 cmxsi1cr_h; /* CMX SI1 clock route high register */
+ u32 cmxsi1syr; /* CMX SI1 SYNC route register */
+ u32 cmxucr1; /* CMX UCC1, UCC3 clock route register */
+ u32 cmxucr2; /* CMX UCC5, UCC7 clock route register */
+ u32 cmxucr3; /* CMX UCC2, UCC4 clock route register */
+ u32 cmxucr4; /* CMX UCC6, UCC8 clock route register */
+ u32 cmxupcr; /* CMX UPC clock route register */
+ u8 res0[0x1C];
+} __attribute__ ((packed)) qe_mux_t;
+
+/* QE Timers
+*/
+typedef struct qe_timers {
+ u8 gtcfr1; /* Timer 1 2 global configuration register */
+ u8 res0[0x3];
+ u8 gtcfr2; /* Timer 3 4 global configuration register */
+ u8 res1[0xB];
+ u16 gtmdr1; /* Timer 1 mode register */
+ u16 gtmdr2; /* Timer 2 mode register */
+ u16 gtrfr1; /* Timer 1 reference register */
+ u16 gtrfr2; /* Timer 2 reference register */
+ u16 gtcpr1; /* Timer 1 capture register */
+ u16 gtcpr2; /* Timer 2 capture register */
+ u16 gtcnr1; /* Timer 1 counter */
+ u16 gtcnr2; /* Timer 2 counter */
+ u16 gtmdr3; /* Timer 3 mode register */
+ u16 gtmdr4; /* Timer 4 mode register */
+ u16 gtrfr3; /* Timer 3 reference register */
+ u16 gtrfr4; /* Timer 4 reference register */
+ u16 gtcpr3; /* Timer 3 capture register */
+ u16 gtcpr4; /* Timer 4 capture register */
+ u16 gtcnr3; /* Timer 3 counter */
+ u16 gtcnr4; /* Timer 4 counter */
+ u16 gtevr1; /* Timer 1 event register */
+ u16 gtevr2; /* Timer 2 event register */
+ u16 gtevr3; /* Timer 3 event register */
+ u16 gtevr4; /* Timer 4 event register */
+ u16 gtps; /* Timer 1 prescale register */
+ u8 res2[0x46];
+} __attribute__ ((packed)) qe_timers_t;
+
+/* BRG
+*/
+typedef struct qe_brg {
+ u32 brgc1; /* BRG1 configuration register */
+ u32 brgc2; /* BRG2 configuration register */
+ u32 brgc3; /* BRG3 configuration register */
+ u32 brgc4; /* BRG4 configuration register */
+ u32 brgc5; /* BRG5 configuration register */
+ u32 brgc6; /* BRG6 configuration register */
+ u32 brgc7; /* BRG7 configuration register */
+ u32 brgc8; /* BRG8 configuration register */
+ u32 brgc9; /* BRG9 configuration register */
+ u32 brgc10; /* BRG10 configuration register */
+ u32 brgc11; /* BRG11 configuration register */
+ u32 brgc12; /* BRG12 configuration register */
+ u32 brgc13; /* BRG13 configuration register */
+ u32 brgc14; /* BRG14 configuration register */
+ u32 brgc15; /* BRG15 configuration register */
+ u32 brgc16; /* BRG16 configuration register */
+ u8 res0[0x40];
+} __attribute__ ((packed)) qe_brg_t;
+
+/* SPI
+*/
+typedef struct spi {
+ u8 res0[0x20];
+ u32 spmode; /* SPI mode register */
+ u8 res1[0x2];
+ u8 spie; /* SPI event register */
+ u8 res2[0x1];
+ u8 res3[0x2];
+ u8 spim; /* SPI mask register */
+ u8 res4[0x1];
+ u8 res5[0x1];
+ u8 spcom; /* SPI command register */
+ u8 res6[0x2];
+ u32 spitd; /* SPI transmit data register (cpu mode) */
+ u32 spird; /* SPI receive data register (cpu mode) */
+ u8 res7[0x8];
+} __attribute__ ((packed)) spi_t;
+
+/* SI
+*/
+typedef struct si1 {
+ u16 siamr1; /* SI1 TDMA mode register */
+ u16 sibmr1; /* SI1 TDMB mode register */
+ u16 sicmr1; /* SI1 TDMC mode register */
+ u16 sidmr1; /* SI1 TDMD mode register */
+ u8 siglmr1_h; /* SI1 global mode register high */
+ u8 res0[0x1];
+ u8 sicmdr1_h; /* SI1 command register high */
+ u8 res2[0x1];
+ u8 sistr1_h; /* SI1 status register high */
+ u8 res3[0x1];
+ u16 sirsr1_h; /* SI1 RAM shadow address register high */
+ u8 sitarc1; /* SI1 RAM counter Tx TDMA */
+ u8 sitbrc1; /* SI1 RAM counter Tx TDMB */
+ u8 sitcrc1; /* SI1 RAM counter Tx TDMC */
+ u8 sitdrc1; /* SI1 RAM counter Tx TDMD */
+ u8 sirarc1; /* SI1 RAM counter Rx TDMA */
+ u8 sirbrc1; /* SI1 RAM counter Rx TDMB */
+ u8 sircrc1; /* SI1 RAM counter Rx TDMC */
+ u8 sirdrc1; /* SI1 RAM counter Rx TDMD */
+ u8 res4[0x8];
+ u16 siemr1; /* SI1 TDME mode register 16 bits */
+ u16 sifmr1; /* SI1 TDMF mode register 16 bits */
+ u16 sigmr1; /* SI1 TDMG mode register 16 bits */
+ u16 sihmr1; /* SI1 TDMH mode register 16 bits */
+ u8 siglmg1_l; /* SI1 global mode register low 8 bits */
+ u8 res5[0x1];
+ u8 sicmdr1_l; /* SI1 command register low 8 bits */
+ u8 res6[0x1];
+ u8 sistr1_l; /* SI1 status register low 8 bits */
+ u8 res7[0x1];
+ u16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits */
+ u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */
+ u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */
+ u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */
+ u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */
+ u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */
+ u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */
+ u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */
+ u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */
+ u8 res8[0x8];
+ u32 siml1; /* SI1 multiframe limit register */
+ u8 siedm1; /* SI1 extended diagnostic mode register */
+ u8 res9[0xBB];
+} __attribute__ ((packed)) si1_t;
+
+/* SI Routing Tables
+*/
+typedef struct sir {
+ u8 tx[0x400];
+ u8 rx[0x400];
+ u8 res0[0x800];
+} __attribute__ ((packed)) sir_t;
+
+/* USB Controller.
+*/
+typedef struct usb_ctlr {
+ u8 usb_usmod;
+ u8 usb_usadr;
+ u8 usb_uscom;
+ u8 res1[1];
+ u16 usb_usep1;
+ u16 usb_usep2;
+ u16 usb_usep3;
+ u16 usb_usep4;
+ u8 res2[4];
+ u16 usb_usber;
+ u8 res3[2];
+ u16 usb_usbmr;
+ u8 res4[1];
+ u8 usb_usbs;
+ u16 usb_ussft;
+ u8 res5[2];
+ u16 usb_usfrn;
+ u8 res6[0x22];
+} __attribute__ ((packed)) usb_t;
+
+/* MCC
+*/
+typedef struct mcc {
+ u32 mcce; /* MCC event register */
+ u32 mccm; /* MCC mask register */
+ u32 mccf; /* MCC configuration register */
+ u32 merl; /* MCC emergency request level register */
+ u8 res0[0xF0];
+} __attribute__ ((packed)) mcc_t;
+
+/* QE UCC Slow
+*/
+typedef struct ucc_slow {
+ u32 gumr_l; /* UCCx general mode register (low) */
+ u32 gumr_h; /* UCCx general mode register (high) */
+ u16 upsmr; /* UCCx protocol-specific mode register */
+ u8 res0[0x2];
+ u16 utodr; /* UCCx transmit on demand register */
+ u16 udsr; /* UCCx data synchronization register */
+ u16 ucce; /* UCCx event register */
+ u8 res1[0x2];
+ u16 uccm; /* UCCx mask register */
+ u8 res2[0x1];
+ u8 uccs; /* UCCx status register */
+ u8 res3[0x24];
+ u16 utpt;
+ u8 guemr; /* UCC general extended mode register */
+ u8 res4[0x200 - 0x091];
+} __attribute__ ((packed)) ucc_slow_t;
+
+typedef struct ucc_ethernet {
+ u32 maccfg1; /* mac configuration reg. 1 */
+ u32 maccfg2; /* mac configuration reg. 2 */
+ u32 ipgifg; /* interframe gap reg. */
+ u32 hafdup; /* half-duplex reg. */
+ u8 res1[0x10];
+ u32 miimcfg; /* MII management configuration reg */
+ u32 miimcom; /* MII management command reg */
+ u32 miimadd; /* MII management address reg */
+ u32 miimcon; /* MII management control reg */
+ u32 miimstat; /* MII management status reg */
+ u32 miimind; /* MII management indication reg */
+ u32 ifctl; /* interface control reg */
+ u32 ifstat; /* interface statux reg */
+ u32 macstnaddr1; /* mac station address part 1 reg */
+ u32 macstnaddr2; /* mac station address part 2 reg */
+ u8 res2[0x8];
+ u32 uempr; /* UCC Ethernet Mac parameter reg */
+ u32 utbipar; /* UCC tbi address reg */
+ u16 uescr; /* UCC Ethernet statistics control reg */
+ u8 res3[0x180 - 0x15A];
+ u32 tx64; /* Total number of frames (including bad
+ * frames) transmitted that were exactly
+ * of the minimal length (64 for un tagged,
+ * 68 for tagged, or with length exactly
+ * equal to the parameter MINLength */
+ u32 tx127; /* Total number of frames (including bad
+ * frames) transmitted that were between
+ * MINLength (Including FCS length==4)
+ * and 127 octets */
+ u32 tx255; /* Total number of frames (including bad
+ * frames) transmitted that were between
+ * 128 (Including FCS length==4) and 255
+ * octets */
+ u32 rx64; /* Total number of frames received including
+ * bad frames that were exactly of the
+ * mninimal length (64 bytes) */
+ u32 rx127; /* Total number of frames (including bad
+ * frames) received that were between
+ * MINLength (Including FCS length==4)
+ * and 127 octets */
+ u32 rx255; /* Total number of frames (including
+ * bad frames) received that were between
+ * 128 (Including FCS length==4) and 255
+ * octets */
+ u32 txok; /* Total number of octets residing in frames
+ * that where involved in succesfull
+ * transmission */
+ u16 txcf; /* Total number of PAUSE control frames
+ * transmitted by this MAC */
+ u8 res4[0x2];
+ u32 tmca; /* Total number of frames that were transmitted
+ * succesfully with the group address bit set
+ * that are not broadcast frames */
+ u32 tbca; /* Total number of frames transmitted
+ * succesfully that had destination address
+ * field equal to the broadcast address */
+ u32 rxfok; /* Total number of frames received OK */
+ u32 rxbok; /* Total number of octets received OK */
+ u32 rbyt; /* Total number of octets received including
+ * octets in bad frames. Must be implemented
+ * in HW because it includes octets in frames
+ * that never even reach the UCC */
+ u32 rmca; /* Total number of frames that were received
+ * succesfully with the group address bit set
+ * that are not broadcast frames */
+ u32 rbca; /* Total number of frames received succesfully
+ * that had destination address equal to the
+ * broadcast address */
+ u32 scar; /* Statistics carry register */
+ u32 scam; /* Statistics caryy mask register */
+ u8 res5[0x200 - 0x1c4];
+} __attribute__ ((packed)) uec_t;
+
+/* QE UCC Fast
+*/
+typedef struct ucc_fast {
+ u32 gumr; /* UCCx general mode register */
+ u32 upsmr; /* UCCx protocol-specific mode register */
+ u16 utodr; /* UCCx transmit on demand register */
+ u8 res0[0x2];
+ u16 udsr; /* UCCx data synchronization register */
+ u8 res1[0x2];
+ u32 ucce; /* UCCx event register */
+ u32 uccm; /* UCCx mask register. */
+ u8 uccs; /* UCCx status register */
+ u8 res2[0x7];
+ u32 urfb; /* UCC receive FIFO base */
+ u16 urfs; /* UCC receive FIFO size */
+ u8 res3[0x2];
+ u16 urfet; /* UCC receive FIFO emergency threshold */
+ u16 urfset; /* UCC receive FIFO special emergency
+ * threshold */
+ u32 utfb; /* UCC transmit FIFO base */
+ u16 utfs; /* UCC transmit FIFO size */
+ u8 res4[0x2];
+ u16 utfet; /* UCC transmit FIFO emergency threshold */
+ u8 res5[0x2];
+ u16 utftt; /* UCC transmit FIFO transmit threshold */
+ u8 res6[0x2];
+ u16 utpt; /* UCC transmit polling timer */
+ u8 res7[0x2];
+ u32 urtry; /* UCC retry counter register */
+ u8 res8[0x4C];
+ u8 guemr; /* UCC general extended mode register */
+ u8 res9[0x100 - 0x091];
+ uec_t ucc_eth;
+} __attribute__ ((packed)) ucc_fast_t;
+
+/* QE UCC
+*/
+typedef struct ucc_common {
+ u8 res1[0x90];
+ u8 guemr;
+ u8 res2[0x200 - 0x091];
+} __attribute__ ((packed)) ucc_common_t;
+
+typedef struct ucc {
+ union {
+ ucc_slow_t slow;
+ ucc_fast_t fast;
+ ucc_common_t common;
+ };
+} __attribute__ ((packed)) ucc_t;
+
+/* MultiPHY UTOPIA POS Controllers (UPC)
+*/
+typedef struct upc {
+ u32 upgcr; /* UTOPIA/POS general configuration register */
+ u32 uplpa; /* UTOPIA/POS last PHY address */
+ u32 uphec; /* ATM HEC register */
+ u32 upuc; /* UTOPIA/POS UCC configuration */
+ u32 updc1; /* UTOPIA/POS device 1 configuration */
+ u32 updc2; /* UTOPIA/POS device 2 configuration */
+ u32 updc3; /* UTOPIA/POS device 3 configuration */
+ u32 updc4; /* UTOPIA/POS device 4 configuration */
+ u32 upstpa; /* UTOPIA/POS STPA threshold */
+ u8 res0[0xC];
+ u32 updrs1_h; /* UTOPIA/POS device 1 rate select */
+ u32 updrs1_l; /* UTOPIA/POS device 1 rate select */
+ u32 updrs2_h; /* UTOPIA/POS device 2 rate select */
+ u32 updrs2_l; /* UTOPIA/POS device 2 rate select */
+ u32 updrs3_h; /* UTOPIA/POS device 3 rate select */
+ u32 updrs3_l; /* UTOPIA/POS device 3 rate select */
+ u32 updrs4_h; /* UTOPIA/POS device 4 rate select */
+ u32 updrs4_l; /* UTOPIA/POS device 4 rate select */
+ u32 updrp1; /* UTOPIA/POS device 1 receive priority low */
+ u32 updrp2; /* UTOPIA/POS device 2 receive priority low */
+ u32 updrp3; /* UTOPIA/POS device 3 receive priority low */
+ u32 updrp4; /* UTOPIA/POS device 4 receive priority low */
+ u32 upde1; /* UTOPIA/POS device 1 event */
+ u32 upde2; /* UTOPIA/POS device 2 event */
+ u32 upde3; /* UTOPIA/POS device 3 event */
+ u32 upde4; /* UTOPIA/POS device 4 event */
+ u16 uprp1;
+ u16 uprp2;
+ u16 uprp3;
+ u16 uprp4;
+ u8 res1[0x8];
+ u16 uptirr1_0; /* Device 1 transmit internal rate 0 */
+ u16 uptirr1_1; /* Device 1 transmit internal rate 1 */
+ u16 uptirr1_2; /* Device 1 transmit internal rate 2 */
+ u16 uptirr1_3; /* Device 1 transmit internal rate 3 */
+ u16 uptirr2_0; /* Device 2 transmit internal rate 0 */
+ u16 uptirr2_1; /* Device 2 transmit internal rate 1 */
+ u16 uptirr2_2; /* Device 2 transmit internal rate 2 */
+ u16 uptirr2_3; /* Device 2 transmit internal rate 3 */
+ u16 uptirr3_0; /* Device 3 transmit internal rate 0 */
+ u16 uptirr3_1; /* Device 3 transmit internal rate 1 */
+ u16 uptirr3_2; /* Device 3 transmit internal rate 2 */
+ u16 uptirr3_3; /* Device 3 transmit internal rate 3 */
+ u16 uptirr4_0; /* Device 4 transmit internal rate 0 */
+ u16 uptirr4_1; /* Device 4 transmit internal rate 1 */
+ u16 uptirr4_2; /* Device 4 transmit internal rate 2 */
+ u16 uptirr4_3; /* Device 4 transmit internal rate 3 */
+ u32 uper1; /* Device 1 port enable register */
+ u32 uper2; /* Device 2 port enable register */
+ u32 uper3; /* Device 3 port enable register */
+ u32 uper4; /* Device 4 port enable register */
+ u8 res2[0x150];
+} __attribute__ ((packed)) upc_t;
+
+/* SDMA
+*/
+typedef struct sdma {
+ u32 sdsr; /* Serial DMA status register */
+ u32 sdmr; /* Serial DMA mode register */
+ u32 sdtr1; /* SDMA system bus threshold register */
+ u32 sdtr2; /* SDMA secondary bus threshold register */
+ u32 sdhy1; /* SDMA system bus hysteresis register */
+ u32 sdhy2; /* SDMA secondary bus hysteresis register */
+ u32 sdta1; /* SDMA system bus address register */
+ u32 sdta2; /* SDMA secondary bus address register */
+ u32 sdtm1; /* SDMA system bus MSNUM register */
+ u32 sdtm2; /* SDMA secondary bus MSNUM register */
+ u8 res0[0x10];
+ u32 sdaqr; /* SDMA address bus qualify register */
+ u32 sdaqmr; /* SDMA address bus qualify mask register */
+ u8 res1[0x4];
+ u32 sdwbcr; /* SDMA CAM entries base register */
+ u8 res2[0x38];
+} __attribute__ ((packed)) sdma_t;
+
+/* Debug Space
+*/
+typedef struct dbg {
+ u32 bpdcr; /* Breakpoint debug command register */
+ u32 bpdsr; /* Breakpoint debug status register */
+ u32 bpdmr; /* Breakpoint debug mask register */
+ u32 bprmrr0; /* Breakpoint request mode risc register 0 */
+ u32 bprmrr1; /* Breakpoint request mode risc register 1 */
+ u8 res0[0x8];
+ u32 bprmtr0; /* Breakpoint request mode trb register 0 */
+ u32 bprmtr1; /* Breakpoint request mode trb register 1 */
+ u8 res1[0x8];
+ u32 bprmir; /* Breakpoint request mode immediate register */
+ u32 bprmsr; /* Breakpoint request mode serial register */
+ u32 bpemr; /* Breakpoint exit mode register */
+ u8 res2[0x48];
+} __attribute__ ((packed)) dbg_t;
+
+/* RISC Special Registers (Trap and Breakpoint)
+*/
+typedef struct rsp {
+ u8 fixme[0x100];
+} __attribute__ ((packed)) rsp_t;
+
+typedef struct qe_immap {
+ qe_iram_t iram; /* I-RAM */
+ qe_ic_t ic; /* Interrupt Controller */
+ cp_qe_t cp; /* Communications Processor */
+ qe_mux_t qmx; /* QE Multiplexer */
+ qe_timers_t qet; /* QE Timers */
+ spi_t spi[0x2]; /* spi */
+ mcc_t mcc; /* mcc */
+ qe_brg_t brg; /* brg */
+ usb_t usb; /* USB */
+ si1_t si1; /* SI */
+ u8 res11[0x800];
+ sir_t sir; /* SI Routing Tables */
+ ucc_t ucc1; /* ucc1 */
+ ucc_t ucc3; /* ucc3 */
+ ucc_t ucc5; /* ucc5 */
+ ucc_t ucc7; /* ucc7 */
+ u8 res12[0x600];
+ upc_t upc1; /* MultiPHY UTOPIA POS Controller 1 */
+ ucc_t ucc2; /* ucc2 */
+ ucc_t ucc4; /* ucc4 */
+ ucc_t ucc6; /* ucc6 */
+ ucc_t ucc8; /* ucc8 */
+ u8 res13[0x600];
+ upc_t upc2; /* MultiPHY UTOPIA POS Controller 2 */
+ sdma_t sdma; /* SDMA */
+ dbg_t dbg; /* Debug Space */
+ rsp_t rsp[0x2]; /* RISC Special Registers
+ * (Trap and Breakpoint) */
+ u8 res14[0x300];
+ u8 res15[0x3A00];
+ u8 res16[0x8000]; /* 0x108000 - 0x110000 */
+ u8 muram[0xC000]; /* 0x110000 - 0x11C000 Multi-user RAM */
+ u8 res17[0x24000]; /* 0x11C000 - 0x140000 */
+ u8 res18[0xC0000]; /* 0x140000 - 0x200000 */
+} __attribute__ ((packed)) qe_map_t;
+
+extern qe_map_t *qe_immr;
+
+#endif /* __IMMAP_QE_H__ */
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 388dea4..6619686 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -749,6 +749,7 @@
#define PVR_405EP_RB 0x51210950
#define PVR_440SP_RA 0x53221850
#define PVR_440SP_RB 0x53221891
+#define PVR_440SP_RC 0x53221892
#define PVR_440SPe_RA 0x53421890
#define PVR_440SPe_RB 0x53421891
#define PVR_601 0x00010000
diff --git a/include/common.h b/include/common.h
index 349d5cf..982d6a8 100644
--- a/include/common.h
+++ b/include/common.h
@@ -270,7 +270,7 @@
void jumptable_init(void);
/* common/memsize.c */
-int get_ram_size (volatile long *, long);
+long get_ram_size (volatile long *, long);
/* $(BOARD)/$(BOARD).c */
void reset_phy (void);
@@ -402,6 +402,11 @@
void ppcDcbz(unsigned long value);
#endif
+#if defined (CONFIG_MPC83XX)
+void ppcDWload(unsigned int *addr, unsigned int *ret);
+void ppcDWstore(unsigned int *addr, unsigned int *value);
+#endif
+
/* $(CPU)/cpu.c */
int checkcpu (void);
int checkicache (void);
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index 1152f83..0d38254 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -172,6 +172,19 @@
#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
#endif
#endif /* CONFIG_MPC5200 */
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE 8192
+
+#define OF_CPU "PowerPC,5200@0"
+#define OF_SOC "soc5200@f0000000"
+#define OF_TBCLK (bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000"
+
/*
* I2C configuration
*/
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 66f1646..5bed2d0 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -36,6 +36,7 @@
*/
#define CONFIG_E300 1 /* E300 Family */
#define CONFIG_MPC83XX 1 /* MPC83XX family */
+#define CONFIG_MPC834X 1 /* MPC834X family */
#define CONFIG_MPC8349 1 /* MPC8349 specific */
#define CONFIG_MPC8349EMDS 1 /* MPC8349EMDS board specific */
@@ -59,9 +60,20 @@
#endif
#endif
+#define CFG_SCCR_INIT (SCCR_DEFAULT & (~SCCR_CLK_MASK))
+#define CFG_SCCR_TSEC1CM SCCR_TSEC1CM_1 /* TSEC1 clock setting */
+#define CFG_SCCR_TSEC2CM SCCR_TSEC2CM_1 /* TSEC2 clock setting */
+#define CFG_SCCR_ENCCM SCCR_ENCCM_3 /* ENC clock setting */
+#define CFG_SCCR_USBCM SCCR_USBCM_3 /* USB clock setting */
+#define CFG_SCCR_VAL ( CFG_SCCR_INIT \
+ | CFG_SCCR_TSEC1CM \
+ | CFG_SCCR_TSEC2CM \
+ | CFG_SCCR_ENCCM \
+ | CFG_SCCR_USBCM )
+
#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
-#define CFG_IMMRBAR 0xE0000000
+#define CFG_IMMR 0xE0000000
#undef CFG_DRAM_TEST /* memory test, takes time */
#define CFG_MEMTEST_START 0x00000000 /* memtest region */
@@ -299,8 +311,8 @@
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
-#define CFG_NS16550_COM1 (CFG_IMMRBAR+0x4500)
-#define CFG_NS16550_COM2 (CFG_IMMRBAR+0x4600)
+#define CFG_NS16550_COM1 (CFG_IMMR+0x4500)
+#define CFG_NS16550_COM2 (CFG_IMMR+0x4600)
/* Use the HUSH parser */
#define CFG_HUSH_PARSER
@@ -308,20 +320,35 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE 8192
+
+#define OF_CPU "PowerPC,8349@0"
+#define OF_SOC "soc8349@e0000000"
+#define OF_TBCLK (bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH "/soc8349@e0000000/serial@4500"
+
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_FSL_I2C
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
-#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
+#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */
#define CFG_I2C_OFFSET 0x3000
#define CFG_I2C2_OFFSET 0x3100
/* TSEC */
#define CFG_TSEC1_OFFSET 0x24000
-#define CFG_TSEC1 (CFG_IMMRBAR+CFG_TSEC1_OFFSET)
+#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET)
#define CFG_TSEC2_OFFSET 0x25000
-#define CFG_TSEC2 (CFG_IMMRBAR+CFG_TSEC2_OFFSET)
+#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET)
/* USB */
#define CFG_USE_MPC834XSYS_USB_PHY 1 /* Use SYS board PHY */
@@ -615,8 +642,8 @@
#endif
/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
-#define CFG_IBAT5L (CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT5U (CFG_IMMRBAR | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
#define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
@@ -666,11 +693,11 @@
#define CONFIG_ETH1ADDR 00:E0:0C:00:7E:21
#endif
-#define CONFIG_IPADDR 192.168.205.5
+#define CONFIG_IPADDR 192.168.1.253
#define CONFIG_HOSTNAME mpc8349emds
-#define CONFIG_ROOTPATH /opt/eldk/ppc_6xx
-#define CONFIG_BOOTFILE /tftpboot/tqm83xx/uImage
+#define CONFIG_ROOTPATH /nfsroot/rootfs
+#define CONFIG_BOOTFILE uImage
#define CONFIG_SERVERIP 192.168.1.1
#define CONFIG_GATEWAYIP 192.168.1.1
@@ -703,14 +730,31 @@
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
"bootm\0" \
- "rootpath=/opt/eldk/ppc_6xx\0" \
- "bootfile=/tftpboot/mpc8349emds/uImage\0" \
"load=tftp 100000 /tftpboot/mpc8349emds/u-boot.bin\0" \
"update=protect off fe000000 fe03ffff; " \
"era fe000000 fe03ffff; cp.b 100000 fe000000 ${filesize}\0" \
"upd=run load;run update\0" \
+ "fdtaddr=400000\0" \
+ "fdtfile=mpc8349emds.dtb\0" \
""
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
#define CONFIG_BOOTCOMMAND "run flash_self"
#endif /* __CONFIG_H */
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
new file mode 100644
index 0000000..cbdbb29
--- /dev/null
+++ b/include/configs/MPC8349ITX.h
@@ -0,0 +1,804 @@
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ MPC8349E-mITX board configuration file
+
+ Memory map:
+
+ 0x0000_0000-0x0FFF_FFFF DDR SDRAM (256 MB)
+ 0x8000_0000-0x9FFF_FFFF PCI1 memory space (512 MB)
+ 0xA000_0000-0xBFFF_FFFF PCI2 memory space (512 MB)
+ 0xE000_0000-0xEFFF_FFFF IMMR (1 MB)
+ 0xE200_0000-0xE2FF_FFFF PCI1 I/O space (16 MB)
+ 0xE300_0000-0xE3FF_FFFF PCI2 I/O space (16 MB)
+ 0xF000_0000-0xF000_FFFF Compact Flash
+ 0xF001_0000-0xF001_FFFF Local bus expansion slot
+ 0xF800_0000-0xF801_FFFF GBE L2 Switch VSC7385
+ 0xFF00_0000-0xFF7F_FFFF Alternative bank of Flash memory (8MB)
+ 0xFF80_0000-0xFFFF_FFFF Boot Flash (8 MB)
+
+ I2C address list:
+ Align. Board
+ Bus Addr Part No. Description Length Location
+ ----------------------------------------------------------------
+ I2C0 0x50 M24256-BWMN6P Board EEPROM 2 U64
+
+ I2C1 0x20 PCF8574 I2C Expander 0 U8
+ I2C1 0x21 PCF8574 I2C Expander 0 U10
+ I2C1 0x38 PCF8574A I2C Expander 0 U8
+ I2C1 0x39 PCF8574A I2C Expander 0 U10
+ I2C1 0x51 (DDR) DDR EEPROM 1 U1
+ I2C1 0x68 DS1339 RTC 1 U68
+
+ Note that a given board has *either* a pair of 8574s or a pair of 8574As.
+*/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_MPC834X /* MPC834x family (8343, 8347, 8349) */
+#define CONFIG_MPC8349 /* MPC8349 specific */
+
+#define CONFIG_PCI
+
+#define CONFIG_COMPACT_FLASH /* The CF card interface on the back of the board */
+#define CONFIG_RTC_DS1337
+
+/* I2C */
+#define CONFIG_HARD_I2C
+
+#ifdef CONFIG_HARD_I2C
+
+#define CONFIG_MISC_INIT_F
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_FSL_I2C
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+#define CFG_I2C_OFFSET 0x3000
+#define CFG_I2C2_OFFSET 0x3100
+#define CFG_SPD_BUS_NUM 1 /* The I2C bus for SPD */
+
+#define CFG_I2C_8574_ADDR1 0x20 /* I2C1, PCF8574 */
+#define CFG_I2C_8574_ADDR2 0x21 /* I2C1, PCF8574 */
+#define CFG_I2C_8574A_ADDR1 0x38 /* I2C1, PCF8574A */
+#define CFG_I2C_8574A_ADDR2 0x39 /* I2C1, PCF8574A */
+#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C0, Board EEPROM */
+#define CFG_I2C_RTC_ADDR 0x68 /* I2C1, DS1339 RTC*/
+#define SPD_EEPROM_ADDRESS 0x51 /* I2C1, DDR */
+
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+/* Don't probe these addresses: */
+#define CFG_I2C_NOPROBES {{1, CFG_I2C_8574_ADDR1}, \
+ {1, CFG_I2C_8574_ADDR2}, \
+ {1, CFG_I2C_8574A_ADDR1}, \
+ {1, CFG_I2C_8574A_ADDR2}}
+/* Bit definitions for the 8574[A] I2C expander */
+#define I2C_8574_REVISION 0x03 /* Board revision, 00=0.0, 01=0.1, 10=1.0 */
+#define I2C_8574_CF 0x08 /* 1=Compact flash absent, 0=present */
+#define I2C_8574_MPCICLKRN 0x10 /* MiniPCI Clk Run */
+#define I2C_8574_PCI66 0x20 /* 0=33MHz PCI, 1=66MHz PCI */
+#define I2C_8574_FLASHSIDE 0x40 /* 0=Reset vector from U4, 1=from U7*/
+
+#undef CONFIG_SOFT_I2C
+
+#endif
+
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+
+#define PCI_66M
+#ifdef PCI_66M
+#define CONFIG_83XX_CLKIN 66666666 /* in Hz */
+#else
+#define CONFIG_83XX_CLKIN 33333333 /* in Hz */
+#endif
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#ifdef PCI_66M
+#define CONFIG_SYS_CLK_FREQ 66666666
+#else
+#define CONFIG_SYS_CLK_FREQ 33333333
+#endif
+#endif
+
+#define CFG_IMMR 0xE0000000 /* The IMMR is relocated to here */
+
+#undef CFG_DRAM_TEST /* memory test, takes time */
+#define CFG_MEMTEST_START 0x00003000 /* memtest region */
+#define CFG_MEMTEST_END 0x07100000 /* only has 128M */
+
+/*
+ * DDR Setup
+ */
+#undef CONFIG_DDR_ECC /* only for ECC DDR module */
+#undef CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */
+#define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/
+
+/*
+ * 32-bit data path mode.
+ *
+ * Please note that using this mode for devices with the real density of 64-bit
+ * effectively reduces the amount of available memory due to the effect of
+ * wrapping around while translating address to row/columns, for example in the
+ * 256MB module the upper 128MB get aliased with contents of the lower
+ * 128MB); normally this define should be used for devices with real 32-bit
+ * data path.
+ */
+#undef CONFIG_DDR_32BIT
+
+#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/
+#define CFG_SDRAM_BASE CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
+#undef CONFIG_DDR_2T_TIMING
+#define CFG_83XX_DDR_USES_CS0
+
+#ifndef CONFIG_SPD_EEPROM
+/*
+ * Manually set up DDR parameters
+ */
+ #define CFG_DDR_SIZE 256 /* Mb */
+ #define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
+
+ #define CFG_DDR_TIMING_1 0x26242321
+ #define CFG_DDR_TIMING_2 0x00000800 /* P9-45, may need tuning */
+#endif
+
+/* FLASH on the Local Bus */
+#define CFG_FLASH_CFI /* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */
+#define CFG_FLASH_BASE 0xFE000000 /* start of FLASH */
+#define CFG_FLASH_SIZE 16 /* FLASH size in MB */
+#define CFG_FLASH_EMPTY_INFO
+
+#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_16 | BR_V)
+#define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
+ OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
+ OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
+#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */
+#define CFG_LBLAWAR0_PRELIM 0x80000017 /* 16Mb window bytes */
+
+/* VSC7385 on the Local Bus */
+#define CFG_VSC7385_BASE 0xF8000000 /* start of VSC7385 */
+
+#define CFG_BR1_PRELIM (CFG_VSC7385_BASE | BR_PS_8 | BR_V)
+#define CFG_OR1_PRELIM (0xFFFE0000 /* 128KB */ | \
+ OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
+ OR_GPCM_SETA | OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
+
+#define CFG_LBLAWBAR1_PRELIM CFG_VSC7385_BASE /* Access window base at VSC7385 base */
+#define CFG_LBLAWAR1_PRELIM 0x80000010 /* Access window size 128K */
+
+#define CFG_MAX_FLASH_BANKS 2 /* number of banks */
+#define CFG_MAX_FLASH_SECT 135 /* sectors per device */
+
+#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE + 0x800000}
+
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+#define CFG_LED_BASE 0xF9000000 /* start of LED and Board ID */
+#define CFG_BR2_PRELIM (CFG_LED_BASE | BR_PS_8 | BR_V)
+#define CFG_OR2_PRELIM (0xFFE00000 /* 2MB */ | \
+ OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | \
+ OR_GPCM_SCY_9 | \
+ OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
+
+#ifdef CONFIG_COMPACT_FLASH
+
+#define CFG_CF_BASE 0xF0000000
+
+#define CFG_BR3_PRELIM (CFG_CF_BASE | BR_PS_16 | BR_MS_UPMA | BR_V)
+#define CFG_OR3_PRELIM (OR_UPM_AM | OR_UPM_BI)
+
+#define CFG_LBLAWBAR2_PRELIM CFG_CF_BASE /* Window base at flash base + LED & Board ID */
+#define CFG_LBLAWAR2_PRELIM 0x8000000F /* 64K bytes */
+
+#undef CONFIG_IDE_RESET
+#undef CONFIG_IDE_PREINIT
+
+#define CFG_IDE_MAXBUS 1
+#define CFG_IDE_MAXDEVICE 1
+
+#define CFG_ATA_IDE0_OFFSET 0x0000
+#define CFG_ATA_BASE_ADDR CFG_CF_BASE
+#define CFG_ATA_DATA_OFFSET 0x0000
+#define CFG_ATA_REG_OFFSET 0
+#define CFG_ATA_ALT_OFFSET 0x0200
+#define CFG_ATA_STRIDE 2
+
+#define ATA_RESET_TIME 1 /* If a CF card is not inserted, time out quickly */
+
+#endif
+
+#define CONFIG_DOS_PARTITION
+
+#define CFG_MID_FLASH_JUMP 0x7F000000
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef CFG_RAMBOOT
+#endif
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK
+#define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/
+
+#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+
+/*
+ * Local Bus LCRR and LBCR regs
+ * LCRR: DLL bypass, Clock divider is 4
+ * External Local Bus rate is
+ * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
+ */
+#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
+#define CFG_LBC_LBCR 0x00000000
+
+#undef CFG_LB_SDRAM /* if board has SRDAM on local bus */
+
+#ifdef CFG_LB_SDRAM
+/*local bus BR2, OR2 definition for SDRAM if soldered on the ADS board*/
+/*
+ * Base Register 2 and Option Register 2 configure SDRAM.
+ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR2, need:
+ * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ * port-size = 32-bits = BR2[19:20] = 11
+ * no parity checking = BR2[21:22] = 00
+ * SDRAM for MSEL = BR2[24:26] = 011
+ * Valid = BR[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861
+ */
+
+#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
+#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
+
+#define CFG_LBLAWBAR2_PRELIM 0xF0000000
+#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64M */
+
+#define CFG_BR2_PRELIM (CFG_LBC_SDRAM_BASE | BR_PS_32 | BR_MS_SDRAM | BR_V)
+#define CFG_OR2_PRELIM (0xFC000000 /* 64 MB */ | \
+ OR_SDRAM_XAM | \
+ ((9 - 7) << OR_SDRAM_COLS_SHIFT) | \
+ ((13 - 9) << OR_SDRAM_ROWS_SHIFT) | \
+ OR_SDRAM_EAD)
+
+#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */
+#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32*/
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_RFEN (1 << (31 - 1))
+#define CFG_LBC_LSDMR_BSMA1516 (3 << (31 - 10))
+#define CFG_LBC_LSDMR_BSMA1617 (4 << (31 - 10))
+#define CFG_LBC_LSDMR_RFCR5 (3 << (31 - 16))
+#define CFG_LBC_LSDMR_RFCR8 (5 << (31 - 16))
+#define CFG_LBC_LSDMR_RFCR16 (7 << (31 - 16))
+#define CFG_LBC_LSDMR_PRETOACT3 (3 << (31 - 19))
+#define CFG_LBC_LSDMR_PRETOACT6 (5 << (31 - 19))
+#define CFG_LBC_LSDMR_PRETOACT7 (7 << (31 - 19))
+#define CFG_LBC_LSDMR_ACTTORW3 (3 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW7 (7 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW6 (6 << (31 - 22))
+#define CFG_LBC_LSDMR_BL8 (1 << (31 - 23))
+#define CFG_LBC_LSDMR_WRC2 (2 << (31 - 27))
+#define CFG_LBC_LSDMR_WRC3 (3 << (31 - 27))
+#define CFG_LBC_LSDMR_WRC4 (0 << (31 - 27))
+#define CFG_LBC_LSDMR_BUFCMD (1 << (31 - 29))
+#define CFG_LBC_LSDMR_CL3 (3 << (31 - 31))
+
+#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4))
+
+#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFEN \
+ | CFG_LBC_LSDMR_BSMA1516 \
+ | CFG_LBC_LSDMR_RFCR8 \
+ | CFG_LBC_LSDMR_PRETOACT6 \
+ | CFG_LBC_LSDMR_ACTTORW3 \
+ | CFG_LBC_LSDMR_BL8 \
+ | CFG_LBC_LSDMR_WRC3 \
+ | CFG_LBC_LSDMR_CL3 \
+ )
+
+/*
+ * SDRAM Controller configuration sequence.
+ */
+#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_PCHALL)
+#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_MRW)
+#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_NORMAL)
+#endif
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_CLK get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1 (CFG_IMMR + 0x4500)
+#define CFG_NS16550_COM2 (CFG_IMMR + 0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE 8192
+
+#define OF_CPU "PowerPC,8349@0"
+#define OF_SOC "soc8349@e0000000"
+#define OF_TBCLK (bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH "/soc8349@e0000000/serial@4500"
+
+#ifdef CONFIG_PCI
+
+#define CONFIG_MPC83XX_PCI2
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE 0x80000000
+#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */
+#define CFG_PCI1_MMIO_BASE (CFG_PCI1_MEM_BASE + CFG_PCI1_MEM_SIZE)
+#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE
+#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */
+#define CFG_PCI1_IO_BASE 0x00000000
+#define CFG_PCI1_IO_PHYS 0xE2000000
+#define CFG_PCI1_IO_SIZE 0x01000000 /* 16M */
+
+#ifdef CONFIG_MPC83XX_PCI2
+#define CFG_PCI2_MEM_BASE (CFG_PCI1_MMIO_BASE + CFG_PCI1_MMIO_SIZE)
+#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
+#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */
+#define CFG_PCI2_MMIO_BASE (CFG_PCI2_MEM_BASE + CFG_PCI2_MEM_SIZE)
+#define CFG_PCI2_MMIO_PHYS CFG_PCI2_MMIO_BASE
+#define CFG_PCI2_MMIO_SIZE 0x10000000 /* 256M */
+#define CFG_PCI2_IO_BASE 0x00000000
+#define CFG_PCI2_IO_PHYS (CFG_PCI1_IO_PHYS + CFG_PCI1_IO_SIZE)
+#define CFG_PCI2_IO_SIZE 0x01000000 /* 16M */
+#endif
+
+#define _IO_BASE 0x00000000 /* points to PCI I/O space */
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+#ifdef CONFIG_RTL8139
+/* This macro is used by RTL8139 but not defined in PPC architecture */
+#define KSEG1ADDR(x) (x)
+#endif
+
+#ifndef CONFIG_PCI_PNP
+ #define PCI_ENET0_IOADDR 0x00000000
+ #define PCI_ENET0_MEMADDR CFG_PCI2_MEM_BASE
+ #define PCI_IDSEL_NUMBER 0x0f /* IDSEL = AD15 */
+#endif
+
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+
+#endif
+
+/* TSEC */
+
+#ifdef CONFIG_TSEC_ENET
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI
+#endif
+
+#define CONFIG_MII
+#define CONFIG_PHY_GIGE /* In case CFG_CMD_MII is specified */
+
+#define CONFIG_MPC83XX_TSEC1
+
+#ifdef CONFIG_MPC83XX_TSEC1
+#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0"
+#define CFG_TSEC1_OFFSET 0x24000
+#define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */
+#define TSEC1_PHYIDX 0
+#endif
+
+#ifdef CONFIG_MPC83XX_TSEC2
+#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1"
+#define CFG_TSEC2_OFFSET 0x25000
+#define CONFIG_UNKNOWN_TSEC /* TSEC2 is proprietary */
+#define TSEC2_PHY_ADDR 4
+#define TSEC2_PHYIDX 0
+#endif
+
+#define CONFIG_ETHPRIME "Freescale TSEC"
+
+#endif
+
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+ #define CFG_ENV_IS_IN_FLASH
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+ #define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
+ #define CFG_ENV_SIZE 0x2000
+#else
+ #define CFG_NO_FLASH /* Flash is not usable now */
+ #define CFG_ENV_IS_NOWHERE /* Store ENV in memory only */
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
+ #define CFG_ENV_SIZE 0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE /* allow baudrate change */
+
+/* CONFIG_COMMANDS */
+
+#ifdef CONFIG_COMPACT_FLASH
+#define CONFIG_COMMANDS_CF (CFG_CMD_IDE | CFG_CMD_FAT)
+#else
+#define CONFIG_COMMANDS_CF 0
+#endif
+
+#ifdef CONFIG_PCI
+#define CONFIG_COMMANDS_PCI CFG_CMD_PCI
+#else
+#define CONFIG_COMMANDS_PCI 0
+#endif
+
+#ifdef CONFIG_HARD_I2C
+#define CONFIG_COMMANDS_I2C CFG_CMD_I2C
+#else
+#define CONFIG_COMMANDS_I2C 0
+#endif
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CONFIG_COMMANDS_CF | \
+ CFG_CMD_NET | \
+ CFG_CMD_PING | \
+ CONFIG_COMMANDS_I2C | \
+ CONFIG_COMMANDS_PCI | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_DATE | \
+ CFG_CMD_CACHE | \
+ CFG_CMD_IRQ)
+#include <cmd_confdefs.h>
+
+/* Watchdog */
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+#ifdef CONFIG_WATCHDOG
+#define CFG_WATCHDOG_VALUE 0xFFFFFFC3
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_LOAD_ADDR 0x2000000 /* default load address */
+#define CFG_PROMPT "MPC8349E-mITX> " /* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE 32768
+#define CFG_CACHELINE_SIZE 32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log2 of the above value */
+#endif
+
+#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST */
+
+#define CFG_HRCW_LOW (\
+ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+ HRCWL_DDR_TO_SCB_CLK_1X1 |\
+ HRCWL_CSB_TO_CLKIN_4X1 |\
+ HRCWL_VCO_1X2 |\
+ HRCWL_CORE_TO_CSB_2X1)
+
+#ifdef PCI_64BIT
+#define CFG_HRCW_HIGH (\
+ HRCWH_PCI_HOST |\
+ HRCWH_64_BIT_PCI |\
+ HRCWH_PCI1_ARBITER_ENABLE |\
+ HRCWH_PCI2_ARBITER_DISABLE |\
+ HRCWH_CORE_ENABLE |\
+ HRCWH_FROM_0X00000100 |\
+ HRCWH_BOOTSEQ_DISABLE |\
+ HRCWH_SW_WATCHDOG_DISABLE |\
+ HRCWH_ROM_LOC_LOCAL_16BIT |\
+ HRCWH_TSEC1M_IN_GMII |\
+ HRCWH_TSEC2M_IN_GMII )
+#else
+#define CFG_HRCW_HIGH (\
+ HRCWH_PCI_HOST |\
+ HRCWH_32_BIT_PCI |\
+ HRCWH_PCI1_ARBITER_ENABLE |\
+ HRCWH_PCI2_ARBITER_DISABLE |\
+ HRCWH_CORE_ENABLE |\
+ HRCWH_FROM_0XFFF00100 |\
+ HRCWH_BOOTSEQ_DISABLE |\
+ HRCWH_SW_WATCHDOG_DISABLE |\
+ HRCWH_ROM_LOC_LOCAL_16BIT |\
+ HRCWH_TSEC1M_IN_GMII |\
+ HRCWH_TSEC2M_IN_GMII )
+#endif
+
+/* System performance */
+#define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */
+#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */
+#define CFG_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */
+#define CFG_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */
+#define CFG_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */
+#define CFG_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */
+#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count */
+
+/* System IO Config */
+#define CFG_SICRH SICRH_TSOBI1 /* Needed for gigabit to work on TSEC 1 */
+#define CFG_SICRL (SICRL_LDP_A | SICRL_USB1)
+
+#define CFG_HID0_INIT 0x000000000
+
+#define CFG_HID0_FINAL CFG_HID0_INIT
+
+#define CFG_HID2 HID2_HBE
+
+/* DDR @ 0x00000000 */
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* PCI @ 0x80000000 */
+#ifdef CONFIG_PCI
+#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#else
+#define CFG_IBAT1L 0
+#define CFG_IBAT1U 0
+#define CFG_IBAT2L 0
+#define CFG_IBAT2U 0
+#endif
+
+#ifdef CONFIG_MPC83XX_PCI2
+#define CFG_IBAT3L (CFG_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT3U (CFG_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_IBAT4L (CFG_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT4U (CFG_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#else
+#define CFG_IBAT3L 0
+#define CFG_IBAT3U 0
+#define CFG_IBAT4L 0
+#define CFG_IBAT4U 0
+#endif
+
+/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
+#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
+#define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT7L 0
+#define CFG_IBAT7U 0
+
+#define CFG_DBAT0L CFG_IBAT0L
+#define CFG_DBAT0U CFG_IBAT0U
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+#define CFG_DBAT2L CFG_IBAT2L
+#define CFG_DBAT2U CFG_IBAT2U
+#define CFG_DBAT3L CFG_IBAT3L
+#define CFG_DBAT3U CFG_IBAT3U
+#define CFG_DBAT4L CFG_IBAT4L
+#define CFG_DBAT4U CFG_IBAT4U
+#define CFG_DBAT5L CFG_IBAT5L
+#define CFG_DBAT5U CFG_IBAT5U
+#define CFG_DBAT6L CFG_IBAT6L
+#define CFG_DBAT6U CFG_IBAT6U
+#define CFG_DBAT7L CFG_IBAT7L
+#define CFG_DBAT7U CFG_IBAT7U
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_OVERWRITE
+
+#ifdef CONFIG_MPC83XX_TSEC1
+#define CONFIG_ETHADDR 00:E0:0C:00:8C:01
+#endif
+
+#ifdef CONFIG_MPC83XX_TSEC2
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR 00:E0:0C:00:8C:02
+#endif
+
+#if 1
+#define CONFIG_IPADDR 10.82.19.159
+#define CONFIG_SERVERIP 10.82.48.106
+#define CONFIG_GATEWAYIP 10.82.19.254
+#define CONFIG_NETMASK 255.255.252.0
+#define CONFIG_NETDEV eth0
+
+#define CONFIG_HOSTNAME mpc8349emitx
+#define CONFIG_ROOTPATH /nfsroot0/u/timur/itx-ltib/rootfs
+#define CONFIG_BOOTFILE timur/uImage
+
+#define CONFIG_UBOOTPATH timur/u-boot.bin
+#else
+#define CONFIG_IPADDR 192.168.1.253
+#define CONFIG_SERVERIP 192.168.1.1
+#define CONFIG_GATEWAYIP 192.168.1.1
+#define CONFIG_NETMASK 255.255.252.0
+#define CONFIG_NETDEV eth0
+
+#define CONFIG_HOSTNAME mpc8349emitx
+#define CONFIG_ROOTPATH /nfsroot/rootfs
+#define CONFIG_BOOTFILE uImage
+
+#define CONFIG_UBOOTPATH u-boot.bin
+#endif
+
+#define CONFIG_UBOOTSTART fe700000
+#define CONFIG_UBOOTEND fe77ffff
+
+#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
+
+#define CONFIG_BAUDRATE 115200
+
+#undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTDELAY 6
+#else
+#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
+#endif
+
+#define XMK_STR(x) #x
+#define MK_STR(x) XMK_STR(x)
+
+#define CONFIG_BOOTARGS \
+ "root=/dev/nfs rw" \
+ " nfsroot=" MK_STR(CONFIG_SERVERIP) ":" MK_STR(CONFIG_ROOTPATH) \
+ " ip=" MK_STR(CONFIG_IPADDR) ":" MK_STR(CONFIG_SERVERIP) ":" \
+ MK_STR(CONFIG_GATEWAYIP) ":" MK_STR(CONFIG_NETMASK) ":" \
+ MK_STR(CONFIG_HOSTNAME) ":" MK_STR(CONFIG_NETDEV) ":off" \
+ " console=ttyS0," MK_STR(CONFIG_BAUDRATE)
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=" MK_STR(CONFIG_NETDEV) "\0" \
+ "tftpflash=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \
+ "erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \
+ "cp.b $loadaddr " MK_STR(CONFIG_UBOOTSTART) " $filesize; " \
+ "cmp.b $loadaddr " MK_STR(CONFIG_UBOOTSTART) " $filesize\0" \
+ "tftpupdate=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \
+ "protect off FEF00000 FEF7FFFF; " \
+ "erase FEF00000 FEF7FFFF; " \
+ "cp.b $loadaddr FEF00000 $filesize; " \
+ "protect on FEF00000 FEF7FFFF; " \
+ "cmp.b $loadaddr FEF00000 $filesize\0" \
+ "tftplinux=tftpboot $loadaddr $bootfile; bootm\0" \
+ "copyuboot=erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \
+ "cp.b fef00000 " MK_STR(CONFIG_UBOOTSTART) " 80000\0" \
+ "fdtaddr=400000\0" \
+ "fdtfile=mpc8349emitx.dtb\0" \
+ ""
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+
+#undef MK_STR
+#undef XMK_STR
+
+#endif
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
new file mode 100644
index 0000000..8ad6551
--- /dev/null
+++ b/include/configs/MPC8360EMDS.h
@@ -0,0 +1,635 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300 1 /* E300 family */
+#define CONFIG_QE 1 /* Has QE */
+#define CONFIG_MPC83XX 1 /* MPC83XX family */
+#define CONFIG_MPC8360 1 /* MPC8360 CPU specific */
+#define CONFIG_MPC8360EMDS 1 /* MPC8360EMDS board specific */
+
+/*
+ * System Clock Setup
+ */
+#ifdef CONFIG_PCISLAVE
+#define CONFIG_83XX_PCICLK 66000000 /* in HZ */
+#else
+#define CONFIG_83XX_CLKIN 66000000 /* in Hz */
+#endif
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_CLK_FREQ 66000000
+#endif
+
+/*
+ * Hardware Reset Configuration Word
+ */
+#define CFG_HRCW_LOW (\
+ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+ HRCWL_DDR_TO_SCB_CLK_1X1 |\
+ HRCWL_CSB_TO_CLKIN_4X1 |\
+ HRCWL_VCO_1X2 |\
+ HRCWL_CE_PLL_VCO_DIV_4 |\
+ HRCWL_CE_PLL_DIV_1X1 |\
+ HRCWL_CE_TO_PLL_1X6 |\
+ HRCWL_CORE_TO_CSB_2X1)
+
+#ifdef CONFIG_PCISLAVE
+#define CFG_HRCW_HIGH (\
+ HRCWH_PCI_AGENT |\
+ HRCWH_PCI1_ARBITER_DISABLE |\
+ HRCWH_PCICKDRV_DISABLE |\
+ HRCWH_CORE_ENABLE |\
+ HRCWH_FROM_0XFFF00100 |\
+ HRCWH_BOOTSEQ_DISABLE |\
+ HRCWH_SW_WATCHDOG_DISABLE |\
+ HRCWH_ROM_LOC_LOCAL_16BIT)
+#else
+#define CFG_HRCW_HIGH (\
+ HRCWH_PCI_HOST |\
+ HRCWH_PCI1_ARBITER_ENABLE |\
+ HRCWH_PCICKDRV_ENABLE |\
+ HRCWH_CORE_ENABLE |\
+ HRCWH_FROM_0X00000100 |\
+ HRCWH_BOOTSEQ_DISABLE |\
+ HRCWH_SW_WATCHDOG_DISABLE |\
+ HRCWH_ROM_LOC_LOCAL_16BIT)
+#endif
+
+/*
+ * System IO Config
+ */
+#define CFG_SICRH 0x00000000
+#define CFG_SICRL 0x40000000
+
+#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
+
+/*
+ * IMMR new address
+ */
+#define CFG_IMMR 0xE0000000
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */
+#define CFG_SDRAM_BASE CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
+
+#define CFG_83XX_DDR_USES_CS0
+
+#undef CONFIG_DDR_ECC /* only for ECC DDR module */
+#define CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */
+
+#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
+#if defined(CONFIG_SPD_EEPROM)
+/*
+ * Determine DDR configuration from I2C interface.
+ */
+#define SPD_EEPROM_ADDRESS 0x52 /* DDR SODIMM */
+#else
+/*
+ * Manually set up DDR parameters
+ */
+#define CFG_DDR_SIZE 256 /* MB */
+#define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9)
+#define CFG_DDR_TIMING_1 0x37344321 /* tCL-tRCD-tRP-tRAS=2.5-3-3-7 */
+#define CFG_DDR_TIMING_2 0x00000800 /* may need tuning */
+#define CFG_DDR_CONTROL 0x42008000 /* Self refresh,2T timing */
+#define CFG_DDR_MODE 0x20000162 /* DLL,normal,seq,4/2.5 */
+#define CFG_DDR_INTERVAL 0x045b0100 /* page mode */
+#endif
+
+/*
+ * Memory test
+ */
+#undef CFG_DRAM_TEST /* memory test, takes time */
+#define CFG_MEMTEST_START 0x00000000 /* memtest region */
+#define CFG_MEMTEST_END 0x00100000
+
+/*
+ * The reserved memory
+ */
+
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef CFG_RAMBOOT
+#endif
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+
+/*
+ * Initial RAM Base Address Setup
+ */
+#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
+#define CFG_LBC_LBCR 0x00000000
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CFG_FLASH_CFI /* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */
+#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */
+#define CFG_FLASH_SIZE 16 /* FLASH size is 16M */
+
+#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */
+#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */
+
+#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \
+ (2 << BR_PS_SHIFT) | /* 16 bit port size */ \
+ BR_V) /* valid */
+#define CFG_OR0_PRELIM 0xfe006ff7 /* 16MB Flash size */
+
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 128 /* sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+
+/*
+ * BCSR on the Local Bus
+ */
+#define CFG_BCSR 0xF8000000
+#define CFG_LBLAWBAR1_PRELIM CFG_BCSR /* Access window base at BCSR base */
+#define CFG_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */
+
+#define CFG_BR1_PRELIM (CFG_BCSR|0x00000801) /* Port size=8bit, MSEL=GPCM */
+#define CFG_OR1_PRELIM 0xFFFFE9f7 /* length 32K */
+
+/*
+ * SDRAM on the Local Bus
+ */
+#define CFG_LBC_SDRAM_BASE 0xF0000000 /* SDRAM base address */
+#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
+
+#define CFG_LB_SDRAM /* if board has SRDAM on local bus */
+
+#ifdef CFG_LB_SDRAM
+#define CFG_LBLAWBAR2_PRELIM CFG_LBC_SDRAM_BASE
+#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64MB */
+
+/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */
+/*
+ * Base Register 2 and Option Register 2 configure SDRAM.
+ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR2, need:
+ * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ * port size = 32-bits = BR2[19:20] = 11
+ * no parity checking = BR2[21:22] = 00
+ * SDRAM for MSEL = BR2[24:26] = 011
+ * Valid = BR[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
+ *
+ * CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * the top 17 bits of BR2.
+ */
+
+#define CFG_BR2_PRELIM 0xf0001861 /*Port size=32bit, MSEL=SDRAM */
+
+/*
+ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ *
+ * For OR2, need:
+ * 64MB mask for AM, OR2[0:7] = 1111 1100
+ * XAM, OR2[17:18] = 11
+ * 9 columns OR2[19-21] = 010
+ * 13 rows OR2[23-25] = 100
+ * EAD set for extra time OR[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
+ */
+
+#define CFG_OR2_PRELIM 0xfc006901
+
+#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */
+#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4))
+
+#define CFG_LBC_LSDMR_COMMON 0x0063b723
+
+/*
+ * SDRAM Controller configuration sequence.
+ */
+#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_PCHALL)
+#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_MRW)
+#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_NORMAL)
+
+#endif
+
+/*
+ * Windows to access PIB via local bus
+ */
+#define CFG_LBLAWBAR3_PRELIM 0xf8008000 /* windows base 0xf8008000 */
+#define CFG_LBLAWAR3_PRELIM 0x8000000f /* windows size 64KB */
+
+/*
+ * CS4 on Local Bus, to PIB
+ */
+#define CFG_BR4_PRELIM 0xf8008801 /* CS4 base address at 0xf8008000 */
+#define CFG_OR4_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
+
+/*
+ * CS5 on Local Bus, to PIB
+ */
+#define CFG_BR5_PRELIM 0xf8010801 /* CS5 base address at 0xf8010000 */
+#define CFG_OR5_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_CLK get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1 (CFG_IMMR+0x4500)
+#define CFG_NS16550_COM2 (CFG_IMMR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE 8192
+
+#define OF_CPU "PowerPC,8360@0"
+#define OF_SOC "soc8360@e0000000"
+#define OF_TBCLK (bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH "/soc8360@e0000000/serial@4500"
+
+/* I2C */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_FSL_I2C
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_NOPROBES {0x52} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET 0x3000
+#define CFG_I2C2_OFFSET 0x3100
+
+/*
+ * Config on-board RTC
+ */
+#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */
+#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI_MEM_BASE 0x80000000
+#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BASE
+#define CFG_PCI_MEM_SIZE 0x10000000 /* 256M */
+#define CFG_PCI_MMIO_BASE 0x90000000
+#define CFG_PCI_MMIO_PHYS CFG_PCI_MMIO_BASE
+#define CFG_PCI_MMIO_SIZE 0x10000000 /* 256M */
+#define CFG_PCI_IO_BASE 0xE0300000
+#define CFG_PCI_IO_PHYS 0xE0300000
+#define CFG_PCI_IO_SIZE 0x100000 /* 1M */
+
+#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE
+#define CFG_PCI_SLV_MEM_BUS 0x00000000
+#define CFG_PCI_SLV_MEM_SIZE 0x80000000
+
+
+#ifdef CONFIG_PCI
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
+
+#endif /* CONFIG_PCI */
+
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 1
+#endif
+
+/*
+ * QE UEC ethernet configuration
+ */
+#define CONFIG_UEC_ETH
+#define CONFIG_ETHPRIME "Freescale GETH"
+#define CONFIG_PHY_MODE_NEED_CHANGE
+
+#define CONFIG_UEC_ETH1 /* GETH1 */
+
+#ifdef CONFIG_UEC_ETH1
+#define CFG_UEC1_UCC_NUM 0 /* UCC1 */
+#define CFG_UEC1_RX_CLK QE_CLK_NONE
+#define CFG_UEC1_TX_CLK QE_CLK9
+#define CFG_UEC1_ETH_TYPE GIGA_ETH
+#define CFG_UEC1_PHY_ADDR 0
+#define CFG_UEC1_INTERFACE_MODE ENET_1000_GMII
+#endif
+
+#define CONFIG_UEC_ETH2 /* GETH2 */
+
+#ifdef CONFIG_UEC_ETH2
+#define CFG_UEC2_UCC_NUM 1 /* UCC2 */
+#define CFG_UEC2_RX_CLK QE_CLK_NONE
+#define CFG_UEC2_TX_CLK QE_CLK4
+#define CFG_UEC2_ETH_TYPE GIGA_ETH
+#define CFG_UEC2_PHY_ADDR 1
+#define CFG_UEC2_INTERFACE_MODE ENET_1000_GMII
+#endif
+
+/*
+ * Environment
+ */
+
+#ifndef CFG_RAMBOOT
+ #define CFG_ENV_IS_IN_FLASH 1
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+ #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
+ #define CFG_ENV_SIZE 0x2000
+#else
+ #define CFG_NO_FLASH 1 /* Flash is not usable now */
+ #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
+ #define CFG_ENV_SIZE 0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_PCI)
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
+ | CFG_CMD_PING \
+ | CFG_CMD_ASKENV \
+ | CFG_CMD_PCI \
+ | CFG_CMD_I2C) \
+ & \
+ ~(CFG_CMD_ENV \
+ | CFG_CMD_LOADS))
+#else
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
+ | CFG_CMD_PING \
+ | CFG_CMD_ASKENV \
+ | CFG_CMD_I2C) \
+ & \
+ ~(CFG_CMD_ENV \
+ | CFG_CMD_LOADS))
+#endif
+#else
+#if defined(CONFIG_PCI)
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ | CFG_CMD_PCI \
+ | CFG_CMD_PING \
+ | CFG_CMD_ASKENV \
+ | CFG_CMD_I2C)
+#else
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ | CFG_CMD_PING \
+ | CFG_CMD_ASKENV \
+ | CFG_CMD_I2C )
+#endif
+#endif
+
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_LOAD_ADDR 0x2000000 /* default load address */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Core HID Setup
+ */
+#define CFG_HID0_INIT 0x000000000
+#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK
+#define CFG_HID2 HID2_HBE
+
+/*
+ * Cache Config
+ */
+#define CFG_DCACHE_SIZE 32768
+#define CFG_CACHELINE_SIZE 32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */
+#endif
+
+/*
+ * MMU Setup
+ */
+
+/* DDR: cache cacheable */
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT0L CFG_IBAT0L
+#define CFG_DBAT0U CFG_IBAT0U
+
+/* IMMRBAR & PCI IO: cache-inhibit and guarded */
+#define CFG_IBAT1L (CFG_IMMR | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT1U (CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+
+/* BCSR: cache-inhibit and guarded */
+#define CFG_IBAT2L (CFG_BCSR | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT2U (CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT2L CFG_IBAT2L
+#define CFG_DBAT2U CFG_IBAT2U
+
+/* FLASH: icache cacheable, but dcache-inhibit and guarded */
+#define CFG_IBAT3L (CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT3U (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_DBAT3L (CFG_FLASH_BASE | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT3U CFG_IBAT3U
+
+/* Local bus SDRAM: cacheable */
+#define CFG_IBAT4L (CFG_LBC_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT4U (CFG_LBC_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP)
+#define CFG_DBAT4L CFG_IBAT4L
+#define CFG_DBAT4U CFG_IBAT4U
+
+/* Stack in dcache: cacheable, no memory coherence */
+#define CFG_IBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_10)
+#define CFG_IBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT5L CFG_IBAT5L
+#define CFG_DBAT5U CFG_IBAT5U
+
+#ifdef CONFIG_PCI
+/* PCI MEM space: cacheable */
+#define CFG_IBAT6L (CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U (CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT6L CFG_IBAT6L
+#define CFG_DBAT6U CFG_IBAT6U
+/* PCI MMIO space: cache-inhibit and guarded */
+#define CFG_IBAT7L (CFG_PCI_MMIO_PHYS | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT7U (CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT7L CFG_IBAT7L
+#define CFG_DBAT7U CFG_IBAT7U
+#else
+#define CFG_IBAT6L (0)
+#define CFG_IBAT6U (0)
+#define CFG_IBAT7L (0)
+#define CFG_IBAT7U (0)
+#define CFG_DBAT6L CFG_IBAT6L
+#define CFG_DBAT6U CFG_IBAT6U
+#define CFG_DBAT7L CFG_IBAT7L
+#define CFG_DBAT7U CFG_IBAT7U
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+#define CONFIG_ENV_OVERWRITE
+
+#if defined(CONFIG_UEC_ETH)
+#define CONFIG_ETHADDR 00:04:9f:ef:01:01
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR 00:04:9f:ef:01:02
+#endif
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
+
+#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "consoledev=ttyS0\0" \
+ "ramdiskaddr=1000000\0" \
+ "ramdiskfile=ramfs.83xx\0" \
+ "fdtaddr=400000\0" \
+ "fdtfile=mpc8349emds.dtb\0" \
+ ""
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+
+#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 4bae103..08674ca 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -217,43 +217,19 @@
#undef CONFIG_BOOTARGS
-#ifdef CONFIG_STK52XX
-# if defined(CONFIG_TQM5200_B)
-# if defined(CFG_LOWBOOT)
-# define ENV_UPDT \
- "update=protect off FC000000 FC07FFFF;" \
- "erase FC000000 FC07FFFF;" \
- "cp.b 200000 FC000000 ${filesize};" \
- "protect on FC000000 FC07FFFF\0"
-# else /* highboot */
-# define ENV_UPDT \
- "update=protect off FFF00000 FFF7FFFF;" \
- "erase FFF00000 FFF7FFFF;" \
+#if defined(CONFIG_TQM5200_B) && !defined(CFG_LOWBOOT)
+# define ENV_UPDT \
+ "update=protect off FFF00000 +${filesize};" \
+ "erase FFF00000 +${filesize};" \
"cp.b 200000 FFF00000 ${filesize};" \
- "protect on FFF00000 FFF7FFFF\0"
-# endif /* CFG_LOWBOOT */
-# else /* !CONFIG_TQM5200_B */
-# define ENV_UPDT \
- "update=protect off FC000000 FC05FFFF;" \
- "erase FC000000 FC05FFFF;" \
- "cp.b 200000 FC000000 ${filesize};" \
- "protect on FC000000 FC05FFFF\0"
-# endif /* CONFIG_TQM5200_B */
-#elif defined (CONFIG_CAM5200)
-# define ENV_UPDT \
- "update=protect off FC000000 FC03FFFF;" \
- "erase FC000000 FC03FFFF;" \
- "cp.b 200000 FC000000 ${filesize};" \
- "protect on FC000000 FC03FFFF\0"
-#elif defined (CONFIG_FO300)
+ "protect on FFF00000 +${filesize}\0"
+#else /* default lowboot configuration */
# define ENV_UPDT \
- "update=protect off FC000000 FC05FFFF;" \
- "erase FC000000 FC05FFFF;" \
+ "update=protect off FC000000 +${filesize};" \
+ "erase FC000000 +${filesize};" \
"cp.b 200000 FC000000 ${filesize};" \
- "protect on FC000000 FC05FFFF\0"
-#else
-# error "Unknown Carrier Board"
-#endif /* CONFIG_STK52XX */
+ "protect on FC000000 +${filesize}\0"
+#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
@@ -432,7 +408,7 @@
*/
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 0x4000 /* 16 k - keep small for fast booting */
-#if defined(CONFIG_TQM5200_B)
+#if defined(CONFIG_TQM5200_B) || defined (CONFIG_CAM5200)
#define CFG_ENV_SECT_SIZE 0x40000
#else
#define CFG_ENV_SECT_SIZE 0x20000
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 4bbee97..728083b 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -37,10 +37,11 @@
#define CONFIG_E300 1 /* E300 Family */
#define CONFIG_MPC83XX 1 /* MPC83XX family */
#define CONFIG_MPC834X 1 /* MPC834X specific */
+#define CONFIG_MPC8349 1 /* MPC8349 specific */
#define CONFIG_TQM834X 1 /* TQM834X board specific */
/* IMMR Base Addres Register, use Freescale default: 0xff400000 */
-#define CFG_IMMRBAR 0xff400000
+#define CFG_IMMR 0xff400000
/* System clock. Primary input clock when in PCI host mode */
#define CONFIG_83XX_CLKIN 66666000 /* 66,666 MHz */
@@ -56,6 +57,17 @@
*/
#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_8)
+#define CFG_SCCR_INIT (SCCR_DEFAULT & (~SCCR_CLK_MASK))
+#define CFG_SCCR_TSEC1CM SCCR_TSEC1CM_1 /* TSEC1 clock setting */
+#define CFG_SCCR_TSEC2CM SCCR_TSEC2CM_1 /* TSEC2 clock setting */
+#define CFG_SCCR_ENCCM SCCR_ENCCM_3 /* ENC clock setting */
+#define CFG_SCCR_USBCM SCCR_USBCM_3 /* USB clock setting */
+#define CFG_SCCR_VAL ( CFG_SCCR_INIT \
+ | CFG_SCCR_TSEC1CM \
+ | CFG_SCCR_TSEC2CM \
+ | CFG_SCCR_ENCCM \
+ | CFG_SCCR_USBCM )
+
/* board pre init: do not call, nothing to do */
#undef CONFIG_BOARD_EARLY_INIT_F
@@ -83,6 +95,7 @@
#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */
#undef CFG_FLASH_CHECKSUM
#define CFG_FLASH_BASE 0x80000000 /* start of FLASH */
+#define CFG_FLASH_SIZE 8 /* FLASH size in MB */
/* buffered writes in the AMD chip set is not supported yet */
#undef CFG_FLASH_USE_BUFFER_WRITE
@@ -197,14 +210,15 @@
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
-#define CFG_NS16550_COM1 (CFG_IMMRBAR + 0x4500)
-#define CFG_NS16550_COM2 (CFG_IMMRBAR + 0x4600)
+#define CFG_NS16550_COM1 (CFG_IMMR + 0x4500)
+#define CFG_NS16550_COM2 (CFG_IMMR + 0x4600)
/*
* I2C
*/
#define CONFIG_HARD_I2C /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_FSL_I2C
#define CFG_I2C_SPEED 400000 /* I2C speed: 400KHz */
#define CFG_I2C_SLAVE 0x7F /* slave address */
#define CFG_I2C_OFFSET 0x3000
@@ -235,9 +249,9 @@
#define CONFIG_MII
#define CFG_TSEC1_OFFSET 0x24000
-#define CFG_TSEC1 (CFG_IMMRBAR + CFG_TSEC1_OFFSET)
+#define CFG_TSEC1 (CFG_IMMR + CFG_TSEC1_OFFSET)
#define CFG_TSEC2_OFFSET 0x25000
-#define CFG_TSEC2 (CFG_IMMRBAR + CFG_TSEC2_OFFSET)
+#define CFG_TSEC2 (CFG_IMMR + CFG_TSEC2_OFFSET)
#if defined(CONFIG_TSEC_ENET)
@@ -460,8 +474,8 @@
#endif
/* IMMRBAR */
-#define CFG_IBAT6L (CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT6U (CFG_IMMRBAR | BATU_BL_1M | BATU_VS | BATU_VP)
+#define CFG_IBAT6L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT6U (CFG_IMMR | BATU_BL_1M | BATU_VS | BATU_VP)
/* FLASH */
#define CFG_IBAT7L (CFG_FLASH_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
new file mode 100644
index 0000000..bbe6b76
--- /dev/null
+++ b/include/configs/alpr.h
@@ -0,0 +1,346 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_ALPR 1 /* Board is ebony */
+#define CONFIG_440GX 1 /* Specifc GX support */
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
+#define CONFIG_LAST_STAGE_INIT 1 /* call last_stage_init() */
+#undef CFG_DRAM_TEST /* Disable-takes long time! */
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+#define CFG_FLASH_BASE 0xffe00000 /* start of FLASH */
+#define CFG_MONITOR_BASE 0xfffc0000 /* start of monitor */
+#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
+#define CFG_PCI_MEMSIZE 0x40000000 /* size of mapped pci memory */
+#define CFG_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */
+#define CFG_ISRAM_BASE 0xc0000000 /* internal SRAM */
+#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */
+#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
+#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
+
+
+#define CFG_FPGA_BASE (CFG_PERIPHERAL_BASE + 0x08300000)
+#define CFG_NVRAM_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x08000000)
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in internal SRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_TEMP_STACK_OCM 1
+#define CFG_OCM_DATA_ADDR CFG_ISRAM_BASE
+#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
+#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef CFG_EXT_SERIAL_CLOCK
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_UART1_CONSOLE /* define for uart1 as console */
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_CFI 1 /* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use common CFI driver */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
+
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */
+#define CONFIG_SDRAM_BANK0 1 /* init onboard DDR SDRAM bank 0 */
+#undef CONFIG_SDRAM_ECC /* enable ECC support */
+#define CFG_SDRAM_TABLE { \
+ {(256 << 20), 13, 0x000C4001}, /* 256MB mode 3, 13x10(4)*/ \
+ {(64 << 20), 12, 0x00082001}} /* 64MB mode 2, 12x9(4) */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
+
+/*-----------------------------------------------------------------------
+ * I2C EEPROM (PCF8594C)
+ *----------------------------------------------------------------------*/
+#define CFG_I2C_EEPROM_ADDR 0x54 /* EEPROM PCF8594C */
+#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
+/* mask of address bits that overflow into the "EEPROM chip address" */
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
+#define CFG_EEPROM_PAGE_WRITE_BITS 3 /* The Philips PCF8594C has */
+ /* 8 byte page write mode using */
+ /* last 3 bits of the address */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 40 /* and takes up to 40 msec */
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth3\0" \
+ "hostname=alpr\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate} " \
+ "mem=193M\0" \
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
+ "bootm\0" \
+ "rootpath=/opt/projects/alpr/nfs_root\0" \
+ "bootfile=/alpr/uImage\0" \
+ "kernel_addr=fff00000\0" \
+ "ramdisk_addr=fff10000\0" \
+ "load=tftp 100000 /alpr/u-boot/u-boot.bin\0" \
+ "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
+ "cp.b 100000 fffc0000 40000;" \
+ "setenv filesize;saveenv\0" \
+ "upd=run load;run update\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#define CONFIG_BOOTDELAY 2 /* autoboot after 5 seconds */
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_NET_MULTI 1
+#define CONFIG_PHY_ADDR 0x02 /* dummy setting, no EMAC0 used */
+#define CONFIG_PHY1_ADDR 0x03 /* dummy setting, no EMAC1 used */
+#define CONFIG_PHY2_ADDR 0x01 /* PHY address for EMAC2 */
+#define CONFIG_PHY3_ADDR 0x02 /* PHY address for EMAC3 */
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
+#define CONFIG_HAS_ETH2
+#define CONFIG_HAS_ETH3
+#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
+#define CONFIG_M88E1111_PHY 1 /* needed for PHY specific setup*/
+#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_NETCONSOLE /* include NetConsole support */
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_MII | \
+ CFG_CMD_NET | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_FPGA | \
+ CFG_CMD_NAND | \
+ CFG_CMD_REGINFO)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+#define CFG_4xx_RESET_TYPE 0x2 /* use chip reset on this board */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+/* General PCI */
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
+#define CONFIG_PCI_BOOTDELAY 1 /* enable pci bootdelay variable*/
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
+#define CFG_PCI_TARGET_INIT /* let board init pci target */
+#define CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
+
+/*-----------------------------------------------------------------------
+ * FPGA stuff
+ *-----------------------------------------------------------------------*/
+#define CONFIG_FPGA CFG_ALTERA_CYCLON2
+#define CFG_FPGA_CHECK_CTRLC
+#define CFG_FPGA_PROG_FEEDBACK
+#define CONFIG_FPGA_COUNT 1 /* Ich habe 2 ... aber in
+ Reihe geschaltet -> sollte gehen,
+ aufpassen mit Datasize ist jetzt
+ halt doppelt so gross ... Seite 306
+ ist das mit den multiple Device in PS
+ Mode erklaert ...*/
+
+/* FPGA program pin configuration */
+#define CFG_GPIO_CLK 18 /* FPGA clk pin (cpu output) */
+#define CFG_GPIO_DATA 19 /* FPGA data pin (cpu output) */
+#define CFG_GPIO_STATUS 20 /* FPGA status pin (cpu input) */
+#define CFG_GPIO_CONFIG 21 /* FPGA CONFIG pin (cpu output) */
+#define CFG_GPIO_CON_DON 22 /* FPGA CONFIG_DONE pin (cpu input) */
+
+#define CFG_GPIO_SEL_DPR 14 /* cpu output */
+#define CFG_GPIO_SEL_AVR 15 /* cpu output */
+#define CFG_GPIO_PROG_EN 23 /* cpu output */
+
+/*-----------------------------------------------------------------------
+ * Definitions for GPIO setup
+ *-----------------------------------------------------------------------*/
+#define CFG_GPIO_EREADY (0x80000000 >> 26)
+#define CFG_GPIO_REV0 (0x80000000 >> 14)
+#define CFG_GPIO_REV1 (0x80000000 >> 15)
+
+/*-----------------------------------------------------------------------
+ * NAND-FLASH stuff
+ *-----------------------------------------------------------------------*/
+#define CFG_MAX_NAND_DEVICE 4
+#define NAND_MAX_CHIPS CFG_MAX_NAND_DEVICE
+#define CFG_NAND_BASE 0xF0000000 /* NAND FLASH Base Address */
+#define CFG_NAND_BASE_LIST { CFG_NAND_BASE + 0, CFG_NAND_BASE + 2, \
+ CFG_NAND_BASE + 4, CFG_NAND_BASE + 6 }
+#define CFG_NAND_QUIET_TEST 1 /* don't warn upon unknown NAND flash */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH CFG_FLASH_BASE
+
+/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization */
+#define CFG_EBC_PB0AP 0x92015480
+#define CFG_EBC_PB0CR (CFG_FLASH | 0x3A000) /* BS=2MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 1 (NAND-FLASH) initialization */
+#define CFG_EBC_PB1AP 0x01840380 /* TWT=3 */
+#define CFG_EBC_PB1CR (CFG_NAND_BASE | 0x18000) /* BS=1MB,BU=R/W,BW=8bit */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 32768 /* For AMCC 440 CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/idmr.h b/include/configs/idmr.h
new file mode 100644
index 0000000..48915b3
--- /dev/null
+++ b/include/configs/idmr.h
@@ -0,0 +1,197 @@
+/*
+ * Configuration settings for the iDMR board
+ *
+ * Based on MC5272C3, r5200 and M5271EVB board configs
+ * (C) Copyright 2006 Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * (C) Copyright 2006 Lab X Technologies <zachary.landau@labxtechnologies.com>
+ * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _IDMR_H
+#define _IDMR_H
+
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+
+#define CONFIG_MCF52x2 /* define processor family */
+#define CONFIG_M5271 /* define processor type */
+#define CONFIG_IDMR /* define board type */
+
+#undef CONFIG_WATCHDOG /* disable watchdog */
+
+/*
+ * Default environment settings
+ */
+#define CONFIG_BOOTCOMMAND "run net_nfs"
+#define CONFIG_BOOTDELAY 5
+#define CONFIG_BAUDRATE 19200
+#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_ETHADDR 00:06:3b:01:41:55
+#define CONFIG_ETHPRIME
+#define CONFIG_IPADDR 192.168.30.1
+#define CONFIG_SERVERIP 192.168.1.1
+#define CONFIG_ROOTPATH
+#define CONFIG_GATEWAYIP 192.168.1.1
+#define CONFIG_NETMASK 255.255.0.0
+#define CONFIG_HOSTNAME idmr
+#define CONFIG_BOOTFILE /tftpboot/idmr/uImage
+#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root " \
+ "filesystem over NFS; echo"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):" \
+ "$(netmask):$(hostname):$(netdev):off panic=1\0" \
+ "flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \
+ "flash_self=run ramargs addip;bootm $(kernel_addr) " \
+ "$(ramdisk_addr)\0" \
+ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "ethact=FEC ETHERNET\0" \
+ "update=prot off ff800000 ff81ffff; era ff800000 ff81ffff; " \
+ "cp.b 200000 ff800000 $(filesize);" \
+ "prot on ff800000 ff81ffff\0" \
+ "load=tftp 200000 $(u-boot)\0" \
+ "u-boot=/tftpboot/idmr/u-boot.bin\0" \
+ ""
+
+/*
+ * Commands' definition
+ */
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
+ CFG_CMD_PING | \
+ CFG_CMD_NET | \
+ CFG_CMD_MII) & \
+ ~(CFG_CMD_LOADS | \
+ CFG_CMD_LOADB))
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+/*
+ * Configuration for environment, which occupies third sector in flash.
+ */
+#ifndef CONFIG_MONITOR_IS_IN_RAM
+#define CFG_ENV_ADDR 0xff820000
+#define CFG_ENV_SECT_SIZE 0x10000
+#define CFG_ENV_SIZE 0x2000
+#define CFG_ENV_IS_IN_FLASH
+#else /* CONFIG_MONITOR_IS_IN_RAM */
+#define CFG_ENV_OFFSET 0x4000
+#define CFG_ENV_SECT_SIZE 0x2000
+#define CFG_ENV_IS_IN_FLASH
+#endif /* !CONFIG_MONITOR_IS_IN_RAM */
+
+#define CFG_PROMPT "=> "
+#define CFG_LONGHELP /* undef to save memory */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else /* !(CONFIG_COMMANDS & CFG_CMD_KGDB) */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif /* (CONFIG_COMMANDS & CFG_CMD_KGDB) */
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_LOAD_ADDR 0x00100000
+
+#define CFG_MEMTEST_START 0x400
+#define CFG_MEMTEST_END 0x380000
+
+#define CFG_HZ (50000000 / 64)
+#define CFG_CLK 100000000
+
+#define CFG_MBAR 0x40000000 /* Register Base Addrs */
+
+/*
+ * Ethernet
+ */
+#define FEC_ENET
+#define CONFIG_NET_RETRY_COUNT 5
+#define CFG_ENET_BD_BASE 0x480000
+#define CFG_DISCOVER_PHY 1
+#define CONFIG_MII 1
+
+/*
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR 0x20000000
+#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */
+#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */
+#define CFG_FLASH_BASE 0xff800000
+
+#ifdef CONFIG_MONITOR_IS_IN_RAM
+#define CFG_MONITOR_BASE 0x20000
+#else /* !CONFIG_MONITOR_IS_IN_RAM */
+#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400)
+#endif /* CONFIG_MONITOR_IS_IN_RAM */
+
+#define CFG_MONITOR_LEN 0x20000
+#define CFG_MALLOC_LEN (256 << 10)
+#define CFG_BOOTPARAMS_LEN (64*1024)
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization ??
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/* FLASH organization */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
+#define CFG_FLASH_ERASE_TOUT 1000
+
+#define CFG_FLASH_SIZE 0x800000
+/*
+ * #define CFG_FLASH_USE_BUFFER_WRITE 1
+ */
+
+/* Cache Configuration */
+#define CFG_CACHELINE_SIZE 16
+
+/* Port configuration */
+#define CFG_FECI2C 0xF0
+#endif /* _IDMR_H */
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index 0c935bf..f60973b 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -94,6 +94,8 @@
#define CONFIG_USB_OHCI
#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
#define CONFIG_USB_STORAGE
+/* automatic software updates (see board/mcc200/auto_update.c) */
+#define CONFIG_AUTO_UPDATE 1
/*
* Supported commands
@@ -173,7 +175,7 @@
* I2C configuration
*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#define CFG_I2C_MODULE 1 /* Select I2C module #1 or #2 */
+#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */
#define CFG_I2C_SPEED 100000 /* 100 kHz */
#define CFG_I2C_SLAVE 0x7F
diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h
new file mode 100644
index 0000000..262e9d6
--- /dev/null
+++ b/include/configs/p3mx.h
@@ -0,0 +1,450 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Based on original work by
+ * Roel Loeffen, (C) Copyright 2006 Prodrive B.V.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * p3mx.h - configuration for Prodrive P3M750 & P3M7448 boards
+ *
+ * The defines:
+ * CONFIG_P3M750 or
+ * CONFIG_P3M7448
+ * are written into include/config.h by the "make xxx_config" command
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_P3Mx /* used for both board versions */
+
+#if defined (CONFIG_P3M750)
+#define CONFIG_750FX /* 750GL/GX/FX */
+#define CFG_BOARD_NAME "P3M750"
+#define CFG_BUS_HZ 100000000
+#define CFG_BUS_CLK CFG_BUS_HZ
+#define CFG_TCLK 100000000
+#elif defined (CONFIG_P3M7448)
+#define CONFIG_74xx
+#define CFG_BOARD_NAME "P3M7448"
+#define CFG_BUS_HZ 133333333
+#define CFG_BUS_CLK CFG_BUS_HZ
+#define CFG_TCLK 133333333
+#endif
+#define CFG_GT_DUAL_CPU /* also for JTAG even with one cpu */
+
+/* which initialization functions to call for this board */
+#define CFG_BOARD_ASM_INIT 1
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_f */
+#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r() */
+#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE 0x00000000
+#ifdef CONFIG_P3M750
+#define CFG_SDRAM1_BASE 0x10000000 /* each 256 MByte */
+#endif
+
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#if defined (CONFIG_P3M750)
+#define CFG_FLASH_BASE 0xff800000 /* start of flash banks */
+#define CFG_BOOT_SIZE _8M /* boot flash */
+#elif defined (CONFIG_P3M7448)
+#define CFG_FLASH_BASE 0xff000000 /* start of flash banks */
+#define CFG_BOOT_SIZE _16M /* boot flash */
+#endif
+#define CFG_BOOT_SPACE CFG_FLASH_BASE /* BOOT_CS0 flash 0 */
+#define CFG_MONITOR_BASE 0xfff00000
+#define CFG_RESET_ADDRESS 0xfff00100
+#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
+#define CFG_MISC_REGION_BASE 0xf0000000
+
+#define CFG_DFL_GT_REGS 0xf1000000 /* boot time GT_REGS */
+#define CFG_GT_REGS 0xf1000000 /* GT Registers are mapped here */
+#define CFG_INT_SRAM_BASE 0x42000000 /* GT offers 256k internal SRAM */
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in internal SRAM)
+ *----------------------------------------------------------------------*/
+ /*
+ * When locking data in cache you should point the CFG_INIT_RAM_ADDRESS
+ * To an unused memory region. The stack will remain in cache until RAM
+ * is initialized
+*/
+#undef CFG_INIT_RAM_LOCK
+#define CFG_INIT_RAM_ADDR 0x42000000
+#define CFG_INIT_RAM_END 0x1000
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#define CONFIG_MPSC /* MV64460 Serial */
+#define CONFIG_MPSC_PORT 0
+#define CONFIG_BAUDRATE 115200 /* console baudrate */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*-----------------------------------------------------------------------
+ * Ethernet
+ *----------------------------------------------------------------------*/
+/* Change the default ethernet port, use this define (options: 0, 1, 2) */
+#define CFG_ETH_PORT ETH_0
+#define CONFIG_NET_MULTI
+#define MV_ETH_DEVS 2
+#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
+#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_CFI /* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+#if defined (CONFIG_P3M750)
+#define CFG_ENV_SECT_SIZE 0x20000 /* one sector (1 device)*/
+#elif defined (CONFIG_P3M7448)
+#define CFG_ENV_SECT_SIZE 0x40000 /* two sectors (2 devices parallel */
+#endif
+#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CONFIG_MV64460_ECC
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CFG_I2C_SPEED 100000 /* I2C speed default */
+
+/* I2C RTC */
+#define CONFIG_RTC_M41T11 1
+#define CFG_I2C_RTC_ADDR 0x68
+#define CFG_M41T11_BASE_YEAR 1900 /* play along with linux */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *----------------------------------------------------------------------*/
+#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show devices on bus */
+
+/* PCI MEMORY MAP section */
+#define CFG_PCI0_MEM_BASE 0x80000000
+#define CFG_PCI0_MEM_SIZE _128M
+#define CFG_PCI1_MEM_BASE 0x88000000
+#define CFG_PCI1_MEM_SIZE _128M
+
+#define CFG_PCI0_0_MEM_SPACE (CFG_PCI0_MEM_BASE)
+#define CFG_PCI1_0_MEM_SPACE (CFG_PCI1_MEM_BASE)
+
+/* PCI I/O MAP section */
+#define CFG_PCI0_IO_BASE 0xfa000000
+#define CFG_PCI0_IO_SIZE _16M
+#define CFG_PCI1_IO_BASE 0xfb000000
+#define CFG_PCI1_IO_SIZE _16M
+
+#define CFG_PCI0_IO_SPACE (CFG_PCI0_IO_BASE)
+#define CFG_PCI0_IO_SPACE_PCI 0x00000000
+#define CFG_PCI1_IO_SPACE (CFG_PCI1_IO_BASE)
+#define CFG_PCI1_IO_SPACE_PCI 0x00000000
+
+#define CFG_ISA_IO_BASE_ADDRESS (CFG_PCI0_IO_BASE)
+
+#define CFG_PCI_IDSEL 0x30
+
+#undef CONFIG_BOOTARGS
+#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
+ "netdev=eth0\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
+ "bootm\0" \
+ "rootpath=/opt/eldk/ppc_6xx\0" \
+ "u-boot=p3mx/u-boot/u-boot.bin\0" \
+ "load=tftp 100000 ${u-boot}\0" \
+ "update=protect off fff00000 fff3ffff;era fff00000 fff3ffff;" \
+ "cp.b 100000 fff00000 40000;" \
+ "setenv filesize;saveenv\0" \
+ "upd=run load;run update\0" \
+ "serverip=11.0.0.152\0"
+
+#if defined (CONFIG_P3M750)
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ CONFIG_EXTRA_ENV_SETTINGS_COMMON \
+ "hostname=p3m750\0" \
+ "bootfile=/tftpboot/p3mx/vxWorks.st\0" \
+ "kernel_addr=fc000000\0" \
+ "ramdisk_addr=fc180000\0" \
+ "vxfile=p3m750/vxWorks\0" \
+ "vxuser=ddg\0" \
+ "vxpass=ddg\0" \
+ "vxtarget=target\0" \
+ "vxflags=0x8\0" \
+ "vxargs=setenv bootargs mgi(0,0)host:${vxfile} h=${serverip} " \
+ "e=${ipaddr} u=${vxuser} pw=${vxpass} tn=${vxtarget} " \
+ "f=${vxflags}\0"
+#elif defined (CONFIG_P3M7448)
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ CONFIG_EXTRA_ENV_SETTINGS_COMMON \
+ "hostname=p3m7448\0"
+#endif
+
+#if defined (CONFIG_P3M750)
+#define CONFIG_BOOTCOMMAND "tftp;run vxargs;bootvx"
+#elif defined (CONFIG_P3M7448)
+#define CONFIG_BOOTCOMMAND " "
+#endif
+
+#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
+ CONFIG_BOOTP_BOOTFILESIZE)
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_ELF | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_MII | \
+ CFG_CMD_NET | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_PCI | \
+ CFG_CMD_CACHE | \
+ CFG_CMD_SDRAM)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x08000000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * Marvell MV64460 config settings
+ *----------------------------------------------------------------------*/
+/* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected device width */
+#if defined (CONFIG_P3M750)
+#define CFG_BOOT_PAR 0x8FDFF87F /* 16 bit flash, disable burst*/
+#elif defined (CONFIG_P3M7448)
+#define CFG_BOOT_PAR 0x8FEFFFFF /* 32 bit flash, burst enabled */
+#endif
+
+/*
+ * MPP[0] Serial Port 0 TxD TxD OUT Connected to P14 (buffered)
+ * MPP[1] Serial Port 0 RxD RxD IN Connected to P14 (buffered)
+ * MPP[2] NC
+ * MPP[3] Serial Port 1 TxD TxD OUT Connected to P14 (buffered)
+ * MPP[4] PCI Monarch# GPIO IN Connected to P12
+ * MPP[5] Serial Port 1 RxD RxD IN Connected to P14 (buffered)
+ * MPP[6] PMC Carrier Interrupt 0 Int IN Connected to P14
+ * MPP[7] PMC Carrier Interrupt 1 Int IN Connected to P14
+ * MPP[8] Reserved Do not use
+ * MPP[9] Reserved Do not use
+ * MPP[10] Reserved Do not use
+ * MPP[11] Reserved Do not use
+ * MPP[12] Phy 0 Interrupt Int IN
+ * MPP[13] Phy 1 Interrupt Int IN
+ * MPP[14] NC
+ * MPP[15] NC
+ * MPP[16] PCI Interrupt C Int IN Connected to P11
+ * MPP[17] PCI Interrupt D Int IN Connected to P11
+ * MPP[18] Watchdog NMI# GPIO IN Connected to MPP[24]
+ * MPP[19] Watchdog Expired# WDE OUT Connected to rst logic
+ * MPP[20] Watchdog Status WD_STS IN Read back of rst by watchdog
+ * MPP[21] NC
+ * MPP[22] GP LED Green GPIO OUT
+ * MPP[23] GP LED Red GPIO OUT
+ * MPP[24] Watchdog NMI# Int OUT
+ * MPP[25] NC
+ * MPP[26] NC
+ * MPP[27] PCI Interrupt A Int IN Connected to P11
+ * MPP[28] NC
+ * MPP[29] PCI Interrupt B Int IN Connected to P11
+ * MPP[30] Module reset GPIO OUT Board reset
+ * MPP[31] PCI EReady GPIO IN Connected to P12
+ */
+#define CFG_MPP_CONTROL_0 0x00303022
+#define CFG_MPP_CONTROL_1 0x00000000
+#define CFG_MPP_CONTROL_2 0x00004000
+#define CFG_MPP_CONTROL_3 0x00000004
+#define CFG_GPP_LEVEL_CONTROL 0x280730D0
+
+/*----------------------------------------------------------------------
+ * Initial BAT mappings
+ */
+
+/* NOTES:
+ * 1) GUARDED and WRITE_THRU not allowed in IBATS
+ * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
+ */
+/* SDRAM */
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_GUARDEDSTORAGE | BATL_CACHEINHIBIT)
+#define CFG_DBAT0U CFG_IBAT0U
+
+/* init ram */
+#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP)
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+
+/* PCI0, PCI1 in one BAT */
+#define CFG_IBAT2L BATL_NO_ACCESS
+#define CFG_IBAT2U CFG_DBAT2U
+#define CFG_DBAT2L (CFG_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT2U (CFG_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* GT regs, bootrom, all the devices, PCI I/O */
+#define CFG_IBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
+#define CFG_IBAT3U (CFG_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
+#define CFG_DBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT3U CFG_IBAT3U
+
+#define CFG_IBAT4L (CFG_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT4U (CFG_SDRAM1_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT4L (CFG_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT4U CFG_IBAT4U
+
+/* set rest out of range for Linux !!!!!!!!!!! */
+
+/* IBAT5 and DBAT5 */
+#define CFG_IBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT5U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT5U CFG_IBAT5U
+
+/* IBAT6 and DBAT6 */
+#define CFG_IBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT6U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT6U CFG_IBAT6U
+
+/* IBAT7 and DBAT7 */
+#define CFG_IBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT7U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT7U CFG_IBAT7U
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */
+#define CFG_VXWORKS_MAC_PTR 0x42010000 /* use some memory in SRAM that's not used!!! */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * L2CR setup -- make sure this is right for your board!
+ * look in include/mpc74xx.h for the defines used here
+ */
+#define CFG_L2
+
+#if defined (CONFIG_750CX) || defined (CONFIG_750FX)
+#define L2_INIT 0
+#else
+#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
+ L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
+#endif
+
+#define L2_ENABLE (L2_INIT | L2CR_L2E)
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 3a76315..00b9222 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -53,7 +53,7 @@
#define CFG_BOOT_BASE_ADDR 0xf0000000
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
-#define CFG_FLASH_BASE 0xfe000000 /* start of FLASH */
+#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */
#define CFG_MONITOR_BASE TEXT_BASE
#define CFG_NAND_ADDR 0xd0000000 /* NAND Flash */
#define CFG_OCM_BASE 0xe0010000 /* ocm */
@@ -102,6 +102,7 @@
#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
#else
#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
+#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */
#endif
/*-----------------------------------------------------------------------
@@ -234,10 +235,10 @@
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
"bootm\0" \
- "rootpath=/opt/eldk/ppc_4xx\0" \
+ "rootpath=/opt/eldk/ppc_4xxFP\0" \
"bootfile=/tftpboot/sequoia/uImage\0" \
- "kernel_addr=FE000000\0" \
- "ramdisk_addr=FE180000\0" \
+ "kernel_addr=FC000000\0" \
+ "ramdisk_addr=FC180000\0" \
"load=tftp 100000 /tftpboot/sequoia/u-boot.bin\0" \
"update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \
"cp.b 100000 FFFA0000 60000\0" \
@@ -378,7 +379,7 @@
#define CFG_NAND_CS 3 /* NAND chip connected to CSx */
/* Memory Bank 0 (NOR-FLASH) initialization */
#define CFG_EBC_PB0AP 0x03017300
-#define CFG_EBC_PB0CR (CFG_FLASH | 0xba000)
+#define CFG_EBC_PB0CR (CFG_FLASH | 0xda000)
/* Memory Bank 3 (NAND-FLASH) initialization */
#define CFG_EBC_PB3AP 0x018003c0
@@ -387,7 +388,7 @@
#define CFG_NAND_CS 0 /* NAND chip connected to CSx */
/* Memory Bank 3 (NOR-FLASH) initialization */
#define CFG_EBC_PB3AP 0x03017300
-#define CFG_EBC_PB3CR (CFG_FLASH | 0xba000)
+#define CFG_EBC_PB3CR (CFG_FLASH | 0xda000)
/* Memory Bank 0 (NAND-FLASH) initialization */
#define CFG_EBC_PB0AP 0x018003c0
diff --git a/include/configs/v38b.h b/include/configs/v38b.h
index cf2d031..554a7a4 100644
--- a/include/configs/v38b.h
+++ b/include/configs/v38b.h
@@ -34,7 +34,7 @@
#define CONFIG_RTC_PCF8563 1 /* has PCF8563 RTC */
#define CONFIG_MPC5200_DDR 1 /* has DDR SDRAM */
-#define CONFIG_HW_WATCHDOG 1 /* has watchdog */
+#undef CONFIG_HW_WATCHDOG /* don't use watchdog */
#define CONFIG_NETCONSOLE 1
@@ -246,7 +246,7 @@
/*
* GPIO configuration
*/
-#define CFG_GPS_PORT_CONFIG 0x90000404
+#define CFG_GPS_PORT_CONFIG 0x90001404
/*
* Miscellaneous configurable options
diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h
index ba27f37..58717f8 100644
--- a/include/configs/yellowstone.h
+++ b/include/configs/yellowstone.h
@@ -37,6 +37,7 @@
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
+#define CONFIG_BOARD_RESET 1 /* call board_reset() */
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index 3d7b4a2..6e942ab 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -37,6 +37,7 @@
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
+#define CONFIG_BOARD_RESET 1 /* call board_reset() */
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
diff --git a/include/environment.h b/include/environment.h
index 26b0712..af605ab 100644
--- a/include/environment.h
+++ b/include/environment.h
@@ -79,8 +79,7 @@
# ifdef CFG_ENV_OFFSET_REDUND
# define CFG_REDUNDAND_ENVIRONMENT
# endif
-# if defined(CONFIG_NAND_U_BOOT)
-/* Use embedded environment in NAND boot versions */
+# ifdef CFG_ENV_IS_EMBEDDED
# define ENV_IS_EMBEDDED 1
# endif
#endif /* CFG_ENV_IS_IN_NAND */
diff --git a/include/flash.h b/include/flash.h
index d91589a..9c57cbc 100644
--- a/include/flash.h
+++ b/include/flash.h
@@ -43,9 +43,14 @@
ulong write_tout; /* maximum write timeout */
ulong buffer_write_tout; /* maximum buffer write timeout */
ushort vendor; /* the primary vendor id */
- ushort cmd_reset; /* Vendor specific reset command */
+ ushort cmd_reset; /* vendor specific reset command */
ushort interface; /* used for x8/x16 adjustments */
ushort legacy_unlock; /* support Intel legacy (un)locking */
+ uchar manufacturer_id; /* manufacturer id */
+ ushort device_id; /* device id */
+ ushort device_id2; /* extended device id */
+ ushort ext_addr; /* extended query table address */
+ ushort cfi_version; /* cfi version */
#endif
} flash_info_t;
@@ -439,6 +444,7 @@
#define FLASH_MAN_MT 0x00400000
#define FLASH_MAN_SHARP 0x00500000
#define FLASH_MAN_ATM 0x00600000
+#define FLASH_MAN_CFI 0x01000000
#define FLASH_TYPEMASK 0x0000FFFF /* extract FLASH type information */
diff --git a/include/i2c.h b/include/i2c.h
index 6d39080..a8f729a 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -82,4 +82,49 @@
uchar i2c_reg_read (uchar chip, uchar reg);
void i2c_reg_write(uchar chip, uchar reg, uchar val);
+/*
+ * Functions for setting the current I2C bus and its speed
+ */
+
+/*
+ * i2c_set_bus_num:
+ *
+ * Change the active I2C bus. Subsequent read/write calls will
+ * go to this one.
+ *
+ * bus - bus index, zero based
+ *
+ * Returns: 0 on success, not 0 on failure
+ *
+ */
+int i2c_set_bus_num(unsigned int bus);
+
+/*
+ * i2c_get_bus_num:
+ *
+ * Returns index of currently active I2C bus. Zero-based.
+ */
+
+unsigned int i2c_get_bus_num(void);
+
+/*
+ * i2c_set_bus_speed:
+ *
+ * Change the speed of the active I2C bus
+ *
+ * speed - bus speed in Hz
+ *
+ * Returns: 0 on success, not 0 on failure
+ *
+ */
+int i2c_set_bus_speed(unsigned int);
+
+/*
+ * i2c_get_bus_speed:
+ *
+ * Returns speed of currently active I2C bus in Hz
+ */
+
+unsigned int i2c_get_bus_speed(void);
+
#endif /* _I2C_H_ */
diff --git a/include/ioports.h b/include/ioports.h
index d7e19e1..cfba667 100644
--- a/include/ioports.h
+++ b/include/ioports.h
@@ -53,3 +53,13 @@
* like the table in the 8260UM (and in the hymod manuals).
*/
extern const iop_conf_t iop_conf_tab[4][32];
+
+typedef struct {
+ unsigned char port;
+ unsigned char pin;
+ int dir;
+ int open_drain;
+ int assign;
+} qe_iop_conf_t;
+
+#define QE_IOP_TAB_END (-1)
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index ea40bad..03dd0ca 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2004 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -8,16 +8,6 @@
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
*/
/*
@@ -29,6 +19,7 @@
#ifndef __MPC83XX_H__
#define __MPC83XX_H__
+#include <config.h>
#if defined(CONFIG_E300)
#include <asm/e300.h>
#endif
@@ -85,6 +76,33 @@
#define LBLAWBAR3 0x0038
#define LBLAWAR3 0x003C
+/*
+ * The device ID and revision numbers
+ */
+#define SPR_8349E_REV10 0x80300100
+#define SPR_8349_REV10 0x80310100
+#define SPR_8347E_REV10_TBGA 0x80320100
+#define SPR_8347_REV10_TBGA 0x80330100
+#define SPR_8347E_REV10_PBGA 0x80340100
+#define SPR_8347_REV10_PBGA 0x80350100
+#define SPR_8343E_REV10 0x80360100
+#define SPR_8343_REV10 0x80370100
+
+#define SPR_8349E_REV11 0x80300101
+#define SPR_8349_REV11 0x80310101
+#define SPR_8347E_REV11_TBGA 0x80320101
+#define SPR_8347_REV11_TBGA 0x80330101
+#define SPR_8347E_REV11_PBGA 0x80340101
+#define SPR_8347_REV11_PBGA 0x80350101
+#define SPR_8343E_REV11 0x80360101
+#define SPR_8343_REV11 0x80370101
+
+#define SPR_8360E_REV10 0x80480010
+#define SPR_8360_REV10 0x80490010
+#define SPR_8360E_REV11 0x80480011
+#define SPR_8360_REV11 0x80490011
+#define SPR_8360E_REV12 0x80480012
+#define SPR_8360_REV12 0x80490012
/*
* Base Registers & Option Registers
@@ -116,9 +134,17 @@
#define BR_MS_UPMA 0x00000080 /* UPMA */
#define BR_MS_UPMB 0x000000A0 /* UPMB */
#define BR_MS_UPMC 0x000000C0 /* UPMC */
+#if defined (CONFIG_MPC8360)
+#define BR_ATOM 0x0000000C
+#define BR_ATOM_SHIFT 2
+#endif
#define BR_V 0x00000001
#define BR_V_SHIFT 0
+#if defined (CONFIG_MPC8349)
#define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V)
+#elif defined (CONFIG_MPC8360)
+#define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_ATOM|BR_V)
+#endif
#define OR0 0x5004
#define OR1 0x500C
@@ -201,14 +227,21 @@
#define HRCWH_PCI_AGENT 0x00000000
#define HRCWH_PCI_HOST 0x80000000
+#if defined (CONFIG_MPC8349)
#define HRCWH_32_BIT_PCI 0x00000000
#define HRCWH_64_BIT_PCI 0x40000000
+#endif
#define HRCWH_PCI1_ARBITER_DISABLE 0x00000000
#define HRCWH_PCI1_ARBITER_ENABLE 0x20000000
+#if defined (CONFIG_MPC8349)
#define HRCWH_PCI2_ARBITER_DISABLE 0x00000000
#define HRCWH_PCI2_ARBITER_ENABLE 0x10000000
+#elif defined (CONFIG_MPC8360)
+#define HRCWH_PCICKDRV_DISABLE 0x00000000
+#define HRCWH_PCICKDRV_ENABLE 0x10000000
+#endif
#define HRCWH_CORE_DISABLE 0x08000000
#define HRCWH_CORE_ENABLE 0x00000000
@@ -225,11 +258,14 @@
#define HRCWH_ROM_LOC_DDR_SDRAM 0x00000000
#define HRCWH_ROM_LOC_PCI1 0x00100000
+#if defined (CONFIG_MPC8349)
#define HRCWH_ROM_LOC_PCI2 0x00200000
+#endif
#define HRCWH_ROM_LOC_LOCAL_8BIT 0x00500000
#define HRCWH_ROM_LOC_LOCAL_16BIT 0x00600000
#define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000
+#if defined (CONFIG_MPC8349)
#define HRCWH_TSEC1M_IN_RGMII 0x00000000
#define HRCWH_TSEC1M_IN_RTBI 0x00004000
#define HRCWH_TSEC1M_IN_GMII 0x00008000
@@ -239,10 +275,22 @@
#define HRCWH_TSEC2M_IN_RTBI 0x00001000
#define HRCWH_TSEC2M_IN_GMII 0x00002000
#define HRCWH_TSEC2M_IN_TBI 0x00003000
+#endif
+
+#if defined (CONFIG_MPC8360)
+#define HRCWH_SECONDARY_DDR_DISABLE 0x00000000
+#define HRCWH_SECONDARY_DDR_ENABLE 0x00000010
+#endif
#define HRCWH_BIG_ENDIAN 0x00000000
#define HRCWH_LITTLE_ENDIAN 0x00000008
+#define HRCWH_LALE_NORMAL 0x00000000
+#define HRCWH_LALE_EARLY 0x00000004
+
+#define HRCWH_LDP_SET 0x00000000
+#define HRCWH_LDP_CLEAR 0x00000002
+
/*
* Hard Reset Configration Word - Low
*/
@@ -281,6 +329,47 @@
#define HRCWL_CORE_TO_CSB_2_5X1 0x00050000
#define HRCWL_CORE_TO_CSB_3X1 0x00060000
+#if defined (CONFIG_MPC8360)
+#define HRCWL_CE_PLL_VCO_DIV_4 0x00000000
+#define HRCWL_CE_PLL_VCO_DIV_8 0x00000040
+#define HRCWL_CE_PLL_VCO_DIV_2 0x00000080
+
+#define HRCWL_CE_PLL_DIV_1X1 0x00000000
+#define HRCWL_CE_PLL_DIV_2X1 0x00000020
+
+#define HRCWL_CE_TO_PLL_1X16_ 0x00000000
+#define HRCWL_CE_TO_PLL_1X2 0x00000002
+#define HRCWL_CE_TO_PLL_1X3 0x00000003
+#define HRCWL_CE_TO_PLL_1X4 0x00000004
+#define HRCWL_CE_TO_PLL_1X5 0x00000005
+#define HRCWL_CE_TO_PLL_1X6 0x00000006
+#define HRCWL_CE_TO_PLL_1X7 0x00000007
+#define HRCWL_CE_TO_PLL_1X8 0x00000008
+#define HRCWL_CE_TO_PLL_1X9 0x00000009
+#define HRCWL_CE_TO_PLL_1X10 0x0000000A
+#define HRCWL_CE_TO_PLL_1X11 0x0000000B
+#define HRCWL_CE_TO_PLL_1X12 0x0000000C
+#define HRCWL_CE_TO_PLL_1X13 0x0000000D
+#define HRCWL_CE_TO_PLL_1X14 0x0000000E
+#define HRCWL_CE_TO_PLL_1X15 0x0000000F
+#define HRCWL_CE_TO_PLL_1X16 0x00000010
+#define HRCWL_CE_TO_PLL_1X17 0x00000011
+#define HRCWL_CE_TO_PLL_1X18 0x00000012
+#define HRCWL_CE_TO_PLL_1X19 0x00000013
+#define HRCWL_CE_TO_PLL_1X20 0x00000014
+#define HRCWL_CE_TO_PLL_1X21 0x00000015
+#define HRCWL_CE_TO_PLL_1X22 0x00000016
+#define HRCWL_CE_TO_PLL_1X23 0x00000017
+#define HRCWL_CE_TO_PLL_1X24 0x00000018
+#define HRCWL_CE_TO_PLL_1X25 0x00000019
+#define HRCWL_CE_TO_PLL_1X26 0x0000001A
+#define HRCWL_CE_TO_PLL_1X27 0x0000001B
+#define HRCWL_CE_TO_PLL_1X28 0x0000001C
+#define HRCWL_CE_TO_PLL_1X29 0x0000001D
+#define HRCWL_CE_TO_PLL_1X30 0x0000001E
+#define HRCWL_CE_TO_PLL_1X31 0x0000001F
+#endif
+
/*
* LCRR - Clock Ratio Register (10.3.1.16)
*/
@@ -310,4 +399,31 @@
#define LCRR_CLKDIV_8 0x00000008
#define LCRR_CLKDIV_SHIFT 0
+/*
+ * SCCR-System Clock Control Register
+ */
+#define SCCR_TSEC1CM_0 0x00000000
+#define SCCR_TSEC1CM_1 0x40000000
+#define SCCR_TSEC1CM_2 0x80000000
+#define SCCR_TSEC1CM_3 0xC0000000
+#define SCCR_TSEC2CM_0 0x00000000
+#define SCCR_TSEC2CM_1 0x10000000
+#define SCCR_TSEC2CM_2 0x20000000
+#define SCCR_TSEC2CM_3 0x30000000
+#define SCCR_ENCCM_0 0x00000000
+#define SCCR_ENCCM_1 0x01000000
+#define SCCR_ENCCM_2 0x02000000
+#define SCCR_ENCCM_3 0x03000000
+#define SCCR_USBCM_0 0x00000000
+#define SCCR_USBCM_1 0x00500000
+#define SCCR_USBCM_2 0x00A00000
+#define SCCR_USBCM_3 0x00F00000
+
+#define SCCR_CLK_MASK ( SCCR_TSEC1CM_3 \
+ | SCCR_TSEC2CM_3 \
+ | SCCR_ENCCM_3 \
+ | SCCR_USBCM_3 )
+
+#define SCCR_DEFAULT 0xFFFFFFFF
+
#endif /* __MPC83XX_H__ */
diff --git a/include/ppc440.h b/include/ppc440.h
index e407320..50f4ec4 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -1350,26 +1350,26 @@
#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define UIC2_DCR_BASE 0xe0
-#define uic2sr (UIC0_DCR_BASE+0x0) /* UIC2 status-Read Clear */
-#define uic2srs (UIC0_DCR_BASE+0x1) /* UIC2 status-Read Set */
-#define uic2er (UIC0_DCR_BASE+0x2) /* UIC2 enable */
-#define uic2cr (UIC0_DCR_BASE+0x3) /* UIC2 critical */
-#define uic2pr (UIC0_DCR_BASE+0x4) /* UIC2 polarity */
-#define uic2tr (UIC0_DCR_BASE+0x5) /* UIC2 triggering */
-#define uic2msr (UIC0_DCR_BASE+0x6) /* UIC2 masked status */
-#define uic2vr (UIC0_DCR_BASE+0x7) /* UIC2 vector */
-#define uic2vcr (UIC0_DCR_BASE+0x8) /* UIC2 vector configuration */
+#define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status-Read Clear */
+#define uic2srs (UIC2_DCR_BASE+0x1) /* UIC2 status-Read Set */
+#define uic2er (UIC2_DCR_BASE+0x2) /* UIC2 enable */
+#define uic2cr (UIC2_DCR_BASE+0x3) /* UIC2 critical */
+#define uic2pr (UIC2_DCR_BASE+0x4) /* UIC2 polarity */
+#define uic2tr (UIC2_DCR_BASE+0x5) /* UIC2 triggering */
+#define uic2msr (UIC2_DCR_BASE+0x6) /* UIC2 masked status */
+#define uic2vr (UIC2_DCR_BASE+0x7) /* UIC2 vector */
+#define uic2vcr (UIC2_DCR_BASE+0x8) /* UIC2 vector configuration */
#define UIC3_DCR_BASE 0xf0
-#define uic3sr (UIC1_DCR_BASE+0x0) /* UIC3 status-Read Clear */
-#define uic3srs (UIC0_DCR_BASE+0x1) /* UIC3 status-Read Set */
-#define uic3er (UIC1_DCR_BASE+0x2) /* UIC3 enable */
-#define uic3cr (UIC1_DCR_BASE+0x3) /* UIC3 critical */
-#define uic3pr (UIC1_DCR_BASE+0x4) /* UIC3 polarity */
-#define uic3tr (UIC1_DCR_BASE+0x5) /* UIC3 triggering */
-#define uic3msr (UIC1_DCR_BASE+0x6) /* UIC3 masked status */
-#define uic3vr (UIC1_DCR_BASE+0x7) /* UIC3 vector */
-#define uic3vcr (UIC1_DCR_BASE+0x8) /* UIC3 vector configuration */
+#define uic3sr (UIC3_DCR_BASE+0x0) /* UIC3 status-Read Clear */
+#define uic3srs (UIC3_DCR_BASE+0x1) /* UIC3 status-Read Set */
+#define uic3er (UIC3_DCR_BASE+0x2) /* UIC3 enable */
+#define uic3cr (UIC3_DCR_BASE+0x3) /* UIC3 critical */
+#define uic3pr (UIC3_DCR_BASE+0x4) /* UIC3 polarity */
+#define uic3tr (UIC3_DCR_BASE+0x5) /* UIC3 triggering */
+#define uic3msr (UIC3_DCR_BASE+0x6) /* UIC3 masked status */
+#define uic3vr (UIC3_DCR_BASE+0x7) /* UIC3 vector */
+#define uic3vcr (UIC3_DCR_BASE+0x8) /* UIC3 vector configuration */
#endif /* CONFIG_440SPE */
#if defined(CONFIG_440GX)
@@ -3183,7 +3183,7 @@
#define GPIO0 0
#define GPIO1 1
-#if defined(CONFIG_440GP)
+#if defined(CONFIG_440GP) || defined(CONFIG_440GX)
#define GPIO0_BASE (CFG_PERIPHERAL_BASE+0x00000700)
#define GPIO0_OR (GPIO0_BASE+0x0)
diff --git a/lib_m68k/time.c b/lib_m68k/time.c
index d45e470..12e38f0 100644
--- a/lib_m68k/time.c
+++ b/lib_m68k/time.c
@@ -153,7 +153,11 @@
timerp[MCFTIMER_PMR] = 0;
/* set period to 1 us */
timerp[MCFTIMER_PCSR] =
+#ifdef CONFIG_M5271
+ (6 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW;
+#else /* !CONFIG_M5271 */
(5 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW;
+#endif /* CONFIG_M5271 */
timerp[MCFTIMER_PMR] = tmp;
while (timerp[MCFTIMER_PCNTR] > 0);
@@ -171,7 +175,11 @@
timerp[MCFTIMER_PCSR] = MCFTIMER_PCSR_OVW;
timerp[MCFTIMER_PMR] = lastinc = 0;
timerp[MCFTIMER_PCSR] =
+#ifdef CONFIG_M5271
+ (6 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW;
+#else /* !CONFIG_M5271 */
(5 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW;
+#endif /* CONFIG_M5271 */
}
void set_timer (ulong t)
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index d9dead8..f424121 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -515,7 +515,7 @@
bd->bi_mbar_base = CFG_MBAR; /* base of internal registers */
#endif
#if defined(CONFIG_MPC83XX)
- bd->bi_immrbar = CFG_IMMRBAR;
+ bd->bi_immrbar = CFG_IMMR;
#endif
#if defined(CONFIG_MPC8220)
bd->bi_mbar_base = CFG_MBAR; /* base of internal registers */
@@ -525,17 +525,17 @@
bd->bi_pevfreq = gd->pev_clk;
bd->bi_flbfreq = gd->flb_clk;
- /* store bootparam to sram (backward compatible), here? */
- {
- u32 *sram = (u32 *)CFG_SRAM_BASE;
- *sram++ = gd->ram_size;
- *sram++ = gd->bus_clk;
- *sram++ = gd->inp_clk;
- *sram++ = gd->cpu_clk;
- *sram++ = gd->vco_clk;
- *sram++ = gd->flb_clk;
- *sram++ = 0xb8c3ba11; /* boot signature */
- }
+ /* store bootparam to sram (backward compatible), here? */
+ {
+ u32 *sram = (u32 *)CFG_SRAM_BASE;
+ *sram++ = gd->ram_size;
+ *sram++ = gd->bus_clk;
+ *sram++ = gd->inp_clk;
+ *sram++ = gd->cpu_clk;
+ *sram++ = gd->vco_clk;
+ *sram++ = gd->flb_clk;
+ *sram++ = 0xb8c3ba11; /* boot signature */
+ }
#endif
bd->bi_bootflags = bootflag; /* boot / reboot flag (for LynxOS) */
diff --git a/net/eth.c b/net/eth.c
index e8ac251..cca9392 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -54,6 +54,7 @@
extern int skge_initialize(bd_t*);
extern int tsec_initialize(bd_t*, int, char *);
extern int npe_initialize(bd_t *);
+extern int uec_initialize(int);
static struct eth_device *eth_devices, *eth_current;
@@ -142,13 +143,10 @@
miiphy_init();
#endif
-#ifdef CONFIG_DB64360
+#if defined(CONFIG_DB64360) || defined(CONFIG_CPCI750)
mv6436x_eth_initialize(bis);
#endif
-#ifdef CONFIG_CPCI750
- mv6436x_eth_initialize(bis);
-#endif
-#ifdef CONFIG_DB64460
+#if defined(CONFIG_DB64460) || defined(CONFIG_P3Mx)
mv6446x_eth_initialize(bis);
#endif
#if defined(CONFIG_4xx) && !defined(CONFIG_IOP480) && !defined(CONFIG_AP1000)
@@ -196,6 +194,12 @@
tsec_initialize(bis, 3, CONFIG_MPC83XX_TSEC4_NAME);
# endif
#endif
+#if defined(CONFIG_UEC_ETH1)
+ uec_initialize(0);
+#endif
+#if defined(CONFIG_UEC_ETH2)
+ uec_initialize(1);
+#endif
#if defined(CONFIG_MPC86XX_TSEC1)
tsec_initialize(bis, 0, CONFIG_MPC86XX_TSEC1_NAME);
#endif