| /* |
| * WORK Microwave work_92105 board low level init |
| * |
| * (C) Copyright 2014 DENX Software Engineering GmbH |
| * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr> |
| * |
| * Low level init is called from SPL to set up the clocks. |
| * On entry, the LPC3250 is in Direct Run mode with all clocks |
| * running at 13 MHz; on exit, ARM clock is 208 MHz, HCLK is |
| * 104 MHz and PCLK is 13 MHz. |
| * |
| * This code must run from SRAM so that the clock changes do |
| * not prevent it from executing. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| .globl lowlevel_init |
| |
| lowlevel_init: |
| |
| /* Set ARM, HCLK, PCLK dividers for normal mode */ |
| ldr r0, =0x0000003D |
| ldr r1, =0x40004040 |
| str r0, [r1] |
| |
| /* Start HCLK PLL for 208 MHz */ |
| ldr r0, =0x0001401E |
| ldr r1, =0x40004058 |
| str r0, [r1] |
| |
| /* wait for HCLK PLL to lock */ |
| 1: |
| ldr r0, [r1] |
| ands r0, r0, #1 |
| beq 1b |
| |
| /* switch to normal mode */ |
| ldr r1, =0x40004044 |
| ldr r0, [r1] |
| orr r0, #0x00000004 |
| str r0, [r1] |
| |
| /* Return to U-boot via saved link register */ |
| mov pc, lr |