diff --git a/board/tqc/tqma6/tqma6.c b/board/tqc/tqma6/tqma6.c
new file mode 100644
index 0000000..69c4551
--- /dev/null
+++ b/board/tqc/tqma6/tqma6.c
@@ -0,0 +1,262 @@
+/*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * Copyright (C) 2013, 2014 TQ Systems (ported SabreSD to TQMa6x)
+ * Author: Markus Niebel <markus.niebel@tq-group.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/arch/clock.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/errno.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/imx-common/mxc_i2c.h>
+#include <common.h>
+#include <fsl_esdhc.h>
+#include <libfdt.h>
+#include <i2c.h>
+#include <mmc.h>
+#include <power/pfuze100_pmic.h>
+#include <power/pmic.h>
+
+#include "tqma6_bb.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define USDHC_CLK_PAD_CTRL (PAD_CTL_PUS_47K_UP  | PAD_CTL_SPEED_LOW | \
+	PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP  | PAD_CTL_SPEED_LOW | \
+	PAD_CTL_DSE_80ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+#define GPIO_OUT_PAD_CTRL  (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_LOW | \
+	PAD_CTL_DSE_40ohm   | PAD_CTL_HYS)
+
+#define GPIO_IN_PAD_CTRL  (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_LOW | \
+	PAD_CTL_DSE_40ohm   | PAD_CTL_HYS)
+
+#define SPI_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+	PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+#define I2C_PAD_CTRL	(PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+	PAD_CTL_DSE_40ohm | PAD_CTL_HYS |			\
+	PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+
+int dram_init(void)
+{
+	gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
+
+	return 0;
+}
+
+static const uint16_t tqma6_emmc_dsr = 0x0100;
+
+/* eMMC on USDHCI3 always present */
+static iomux_v3_cfg_t const tqma6_usdhc3_pads[] = {
+	NEW_PAD_CTRL(MX6_PAD_SD3_CLK__SD3_CLK,		USDHC_PAD_CTRL),
+	NEW_PAD_CTRL(MX6_PAD_SD3_CMD__SD3_CMD,		USDHC_PAD_CTRL),
+	NEW_PAD_CTRL(MX6_PAD_SD3_DAT0__SD3_DATA0,	USDHC_PAD_CTRL),
+	NEW_PAD_CTRL(MX6_PAD_SD3_DAT1__SD3_DATA1,	USDHC_PAD_CTRL),
+	NEW_PAD_CTRL(MX6_PAD_SD3_DAT2__SD3_DATA2,	USDHC_PAD_CTRL),
+	NEW_PAD_CTRL(MX6_PAD_SD3_DAT3__SD3_DATA3,	USDHC_PAD_CTRL),
+	NEW_PAD_CTRL(MX6_PAD_SD3_DAT4__SD3_DATA4,	USDHC_PAD_CTRL),
+	NEW_PAD_CTRL(MX6_PAD_SD3_DAT5__SD3_DATA5,	USDHC_PAD_CTRL),
+	NEW_PAD_CTRL(MX6_PAD_SD3_DAT6__SD3_DATA6,	USDHC_PAD_CTRL),
+	NEW_PAD_CTRL(MX6_PAD_SD3_DAT7__SD3_DATA7,	USDHC_PAD_CTRL),
+	/* eMMC reset */
+	NEW_PAD_CTRL(MX6_PAD_SD3_RST__SD3_RESET,	GPIO_OUT_PAD_CTRL),
+};
+
+/*
+ * According to board_mmc_init() the following map is done:
+ * (U-boot device node)    (Physical Port)
+ * mmc0                    eMMC (SD3) on TQMa6
+ * mmc1 .. n               optional slots used on baseboard
+ */
+struct fsl_esdhc_cfg tqma6_usdhc_cfg = {
+	.esdhc_base = USDHC3_BASE_ADDR,
+	.max_bus_width = 8,
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	int ret = 0;
+
+	if (cfg->esdhc_base == USDHC3_BASE_ADDR)
+		/* eMMC/uSDHC3 is always present */
+		ret = 1;
+	else
+		ret = tqma6_bb_board_mmc_getcd(mmc);
+
+	return ret;
+}
+
+int board_mmc_getwp(struct mmc *mmc)
+{
+	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	int ret = 0;
+
+	if (cfg->esdhc_base == USDHC3_BASE_ADDR)
+		/* eMMC/uSDHC3 is always present */
+		ret = 0;
+	else
+		ret = tqma6_bb_board_mmc_getwp(mmc);
+
+	return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	imx_iomux_v3_setup_multiple_pads(tqma6_usdhc3_pads,
+					 ARRAY_SIZE(tqma6_usdhc3_pads));
+	tqma6_usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+	if (fsl_esdhc_initialize(bis, &tqma6_usdhc_cfg)) {
+		puts("Warning: failed to initialize eMMC dev\n");
+	} else {
+		struct mmc *mmc = find_mmc_device(0);
+		if (mmc)
+			mmc_set_dsr(mmc, tqma6_emmc_dsr);
+	}
+
+	tqma6_bb_board_mmc_init(bis);
+
+	return 0;
+}
+
+static iomux_v3_cfg_t const tqma6_ecspi1_pads[] = {
+	/* SS1 */
+	NEW_PAD_CTRL(MX6_PAD_EIM_D19__GPIO3_IO19, SPI_PAD_CTRL),
+	NEW_PAD_CTRL(MX6_PAD_EIM_D16__ECSPI1_SCLK, SPI_PAD_CTRL),
+	NEW_PAD_CTRL(MX6_PAD_EIM_D17__ECSPI1_MISO, SPI_PAD_CTRL),
+	NEW_PAD_CTRL(MX6_PAD_EIM_D18__ECSPI1_MOSI, SPI_PAD_CTRL),
+};
+
+static unsigned const tqma6_ecspi1_cs[] = {
+	IMX_GPIO_NR(3, 19),
+};
+
+static void tqma6_iomuxc_spi(void)
+{
+	unsigned i;
+
+	for (i = 0; i < ARRAY_SIZE(tqma6_ecspi1_cs); ++i)
+		gpio_direction_output(tqma6_ecspi1_cs[i], 1);
+	imx_iomux_v3_setup_multiple_pads(tqma6_ecspi1_pads,
+					 ARRAY_SIZE(tqma6_ecspi1_pads));
+}
+
+static struct i2c_pads_info tqma6_i2c3_pads = {
+	/* I2C3: on board LM75, M24C64,  */
+	.scl = {
+		.i2c_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_5__I2C3_SCL,
+					 I2C_PAD_CTRL),
+		.gpio_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_5__GPIO1_IO05,
+					  I2C_PAD_CTRL),
+		.gp = IMX_GPIO_NR(1, 5)
+	},
+	.sda = {
+		.i2c_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_6__I2C3_SDA,
+					 I2C_PAD_CTRL),
+		.gpio_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_6__GPIO1_IO06,
+					  I2C_PAD_CTRL),
+		.gp = IMX_GPIO_NR(1, 6)
+	}
+};
+
+static void tqma6_setup_i2c(void)
+{
+	/* use logical index for bus, e.g. I2C1 -> 0 */
+	setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &tqma6_i2c3_pads);
+}
+
+int board_early_init_f(void)
+{
+	return tqma6_bb_board_early_init_f();
+}
+
+int board_init(void)
+{
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+	tqma6_iomuxc_spi();
+	tqma6_setup_i2c();
+
+	tqma6_bb_board_init();
+
+	return 0;
+}
+
+static const char *tqma6_get_boardname(void)
+{
+	u32 cpurev = get_cpu_rev();
+
+	switch ((cpurev & 0xFF000) >> 12) {
+	case MXC_CPU_MX6SOLO:
+		return "TQMa6S";
+		break;
+	case MXC_CPU_MX6DL:
+		return "TQMa6DL";
+		break;
+	case MXC_CPU_MX6D:
+		return "TQMa6D";
+		break;
+	case MXC_CPU_MX6Q:
+		return "TQMa6Q";
+		break;
+	default:
+		return "??";
+	};
+}
+
+int board_late_init(void)
+{
+	struct pmic *p;
+	u32 reg;
+
+	setenv("board_name", tqma6_get_boardname());
+
+	/*
+	 * configure PFUZE100 PMIC:
+	 * TODO: should go to power_init_board if bus switching is
+	 * fixed in generic power code
+	 */
+	power_pfuze100_init(TQMA6_PFUZE100_I2C_BUS);
+	p = pmic_get("PFUZE100_PMIC");
+	if (p && !pmic_probe(p)) {
+		pmic_reg_read(p, PFUZE100_DEVICEID, &reg);
+		printf("PMIC: PFUZE100_PMIC ID=0x%02x\n", reg);
+	}
+
+	tqma6_bb_board_late_init();
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	printf("Board: %s on a %s\n", tqma6_get_boardname(),
+	       tqma6_bb_get_boardname());
+	return 0;
+}
+
+/*
+ * Device Tree Support
+ */
+#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	/* bring in eMMC dsr settings */
+	do_fixup_by_path_u32(blob,
+			     "/soc/aips-bus@02100000/usdhc@02198000",
+			     "dsr", tqma6_emmc_dsr, 2);
+	tqma6_bb_ft_board_setup(blob, bd);
+}
+#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */