CPCI750: Add CPCI-HD/2 support
This patch adds support for the esd CPCI-HD/2 board to u-boot for CPCI-CPU/750.
As the primary devices on the CPCI-HD/2 board are connected to device 1 and 3,
the device must be swapped.
Signed-off-by: Reinhard Arlt <reinhard.arlt@esd.eu>
diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h
index d735e61..a6af86c 100644
--- a/include/configs/CPCI750.h
+++ b/include/configs/CPCI750.h
@@ -187,6 +187,8 @@
#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_SPEED 80000 /* I2C speed default */
+#define CONFIG_PRAM 0
+
#define CONFIG_SYS_GT_DUAL_CPU /* also for JTAG even with one cpu */
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
@@ -241,11 +243,6 @@
#define CONFIG_SYS_TCLK 133000000
-/*#define CONFIG_SYS_750FX_HID0 0x8000c084*/
-#define CONFIG_SYS_750FX_HID0 0x80008484
-#define CONFIG_SYS_750FX_HID1 0x54800000
-#define CONFIG_SYS_750FX_HID2 0x00000000
-
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
@@ -457,7 +454,11 @@
#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */
#define CONFIG_SYS_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */
-
+#ifndef __ASSEMBLY__
+int ata_device(int dev);
+#endif
+#define ATA_DEVICE(dev) ata_device(dev)
+#define CONFIG_ATAPI 1
/*----------------------------------------------------------------------
* Initial BAT mappings
@@ -497,8 +498,8 @@
* IBAT4 and DBAT4
* FIXME: ingo disable BATs for Linux Kernel
*/
-#undef SETUP_HIGH_BATS_FX750 /* don't initialize BATS 4-7 */
-/*#define SETUP_HIGH_BATS_FX750*/ /* initialize BATS 4-7 */
+/* #undef SETUP_HIGH_BATS_FX750 */ /* don't initialize BATS 4-7 */
+#define SETUP_HIGH_BATS_FX750 /* initialize BATS 4-7 */
#ifdef SETUP_HIGH_BATS_FX750
#define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
@@ -622,4 +623,6 @@
#define CPCI750_ECC_TEST (((in8(0xf0300000) & 0x02) == 0) ? 1 : 0)
#define CONFIG_SYS_PLD_VER 0xf0e00000
+#define CONFIG_OF_LIBFDT 1
+
#endif /* __CONFIG_H */