OMAP3: overo: Move ethernet CS4 configuration to execute based on board id
By moving the CS4 configuration into the board specific configuration, it
is left free for custom carrier boards. The USRP-E1XX series uses
CS4 to control access to an FPGA, so without this patch the device driver
cannot claim CS4.
Signed-off-by: Philip Balister <philip@opensdr.com>
Tested-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
diff --git a/board/overo/overo.c b/board/overo/overo.c
index 850dfee..2f9eba6 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -233,6 +233,9 @@
printf("Recognized Tobi Duo expansion board (rev %d %s)\n",
expansion_config.revision,
expansion_config.fab_revision);
+ /* second lan chip */
+ enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[4],
+ 0x2B000000, GPMC_SIZE_16M);
break;
case GUMSTIX_PALO35:
printf("Recognized Palo35 expansion board (rev %d %s)\n",
@@ -310,10 +313,6 @@
enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5], 0x2C000000,
GPMC_SIZE_16M);
- /* second lan chip */
- enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[4], 0x2B000000,
- GPMC_SIZE_16M);
-
/* Enable off mode for NWE in PADCONF_GPMC_NWE register */
writew(readw(&ctrl_base ->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
/* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */