Convert CONFIG_SYS_OMAP24_I2C_SLAVE et al to Kconfig
This converts the following to Kconfig:
CONFIG_SYS_OMAP24_I2C_SLAVE
CONFIG_SYS_OMAP24_I2C_SPEED
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Paul Kocialkowski <contact@paulk.fr>
diff --git a/configs/am335x_baltos_defconfig b/configs/am335x_baltos_defconfig
index 548e045..97e6001 100644
--- a/configs/am335x_baltos_defconfig
+++ b/configs/am335x_baltos_defconfig
@@ -47,6 +47,7 @@
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:128k(SPL),128k(SPL.backup1),128k(SPL.backup2),128k(SPL.backup3),1920k(u-boot),-(UBI)"
CONFIG_CMD_UBI=y
CONFIG_ISO_PARTITION=y
+CONFIG_SYS_OMAP24_I2C_SPEED=1000
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_PHYLIB=y
diff --git a/configs/cm_t3517_defconfig b/configs/cm_t3517_defconfig
index fa78bde..c1e1153 100644
--- a/configs/cm_t3517_defconfig
+++ b/configs/cm_t3517_defconfig
@@ -31,6 +31,7 @@
CONFIG_MTDIDS_DEFAULT="nand0=nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:512k(x-loader),1920k(u-boot),256k(u-boot-env),4m(kernel),-(fs)"
CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SYS_OMAP24_I2C_SPEED=400000
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS_GPIO=y
CONFIG_LED_STATUS0=y
diff --git a/configs/eco5pk_defconfig b/configs/eco5pk_defconfig
index c5b5c9b..c371020 100644
--- a/configs/eco5pk_defconfig
+++ b/configs/eco5pk_defconfig
@@ -26,6 +26,7 @@
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(xloader-nand),1024k(uboot-nand),256k(params-nand),5120k(kernel),-(ubifs)"
CONFIG_CMD_UBI=y
CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SYS_OMAP24_I2C_SPEED=400000
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
diff --git a/configs/kc1_defconfig b/configs/kc1_defconfig
index e828405..b4a5ce6 100644
--- a/configs/kc1_defconfig
+++ b/configs/kc1_defconfig
@@ -34,6 +34,7 @@
CONFIG_CMD_FS_GENERIC=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
+CONFIG_SYS_OMAP24_I2C_SPEED=400000
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
diff --git a/configs/mt_ventoux_defconfig b/configs/mt_ventoux_defconfig
index 3dd8adb..d7e5444 100644
--- a/configs/mt_ventoux_defconfig
+++ b/configs/mt_ventoux_defconfig
@@ -31,6 +31,7 @@
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1m(u-boot),256k(env1),256k(env2),8m(ubisystem),-(rootfs)"
CONFIG_CMD_UBI=y
CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SYS_OMAP24_I2C_SPEED=400000
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
diff --git a/configs/sniper_defconfig b/configs/sniper_defconfig
index a3bae56..84ba175 100644
--- a/configs/sniper_defconfig
+++ b/configs/sniper_defconfig
@@ -35,6 +35,7 @@
CONFIG_CMD_FS_GENERIC=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
+CONFIG_SYS_OMAP24_I2C_SPEED=400000
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
diff --git a/configs/twister_defconfig b/configs/twister_defconfig
index 03db9df..f49c234 100644
--- a/configs/twister_defconfig
+++ b/configs/twister_defconfig
@@ -31,6 +31,7 @@
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1m(u-boot),256k(env1),256k(env2),6m(kernel),-(rootfs)"
CONFIG_CMD_UBI=y
CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SYS_OMAP24_I2C_SPEED=400000
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 0630712..17d21bb 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -162,6 +162,20 @@
help
Add support for the OMAP2+ I2C driver.
+if SYS_I2C_OMAP24XX
+config SYS_OMAP24_I2C_SLAVE
+ int "I2C Slave addr channel 0"
+ default 1
+ help
+ OMAP24xx I2C Slave address channel 0
+
+config SYS_OMAP24_I2C_SPEED
+ int "I2C Slave channel 0 speed"
+ default 100000
+ help
+ OMAP24xx Slave speed channel 0
+endif
+
config SYS_I2C_RCAR_IIC
bool "Renesas RCar Gen3 IIC driver"
depends on RCAR_GEN3 && DM_I2C
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 16212ef..35e7f9d 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -97,8 +97,6 @@
#endif /* CONFIG_USB_AM35X */
#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
/*
* Board NAND Info.
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index ac5070d..4d94078 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -56,8 +56,6 @@
#endif /* CONFIG_USB_MUSB_AM35X */
/* I2C */
-#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
/* Ethernet */
#define CONFIG_DRIVER_TI_EMAC
diff --git a/include/configs/baltos.h b/include/configs/baltos.h
index 939ee3b..75dd0c5 100644
--- a/include/configs/baltos.h
+++ b/include/configs/baltos.h
@@ -39,8 +39,6 @@
#define CONFIG_MTD_DEVICE
/* I2C configuration */
-#undef CONFIG_SYS_OMAP24_I2C_SPEED
-#define CONFIG_SYS_OMAP24_I2C_SPEED 1000
#ifdef CONFIG_NAND
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00080000
diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
index 15c481d..ca0440e 100644
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -70,8 +70,6 @@
/* I2C */
#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
/*
* Our platforms make use of SPL to initalize the hardware (primarily
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 3c64cb5..deb26fb 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -80,8 +80,6 @@
#define CONFIG_MTD_PARTITIONS
#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_I2C_EEPROM_BUS 0
diff --git a/include/configs/cm_t3517.h b/include/configs/cm_t3517.h
index fe8b39a..12fa186 100644
--- a/include/configs/cm_t3517.h
+++ b/include/configs/cm_t3517.h
@@ -89,8 +89,6 @@
#define CONFIG_MTD_PARTITIONS
#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED 400000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_I2C_EEPROM_BUS 0
diff --git a/include/configs/kc1.h b/include/configs/kc1.h
index 94c3d0a..1d1f2db 100644
--- a/include/configs/kc1.h
+++ b/include/configs/kc1.h
@@ -58,8 +58,6 @@
*/
#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED 400000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
#define CONFIG_I2C_MULTI_BUS
/*
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index f0ab990..552b517 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -79,8 +79,6 @@
#define CONFIG_MTD_DEVICE
#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
/* RTC */
#define CONFIG_RTC_DS1337
diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h
index 00509e8..6312ed7 100644
--- a/include/configs/nokia_rx51.h
+++ b/include/configs/nokia_rx51.h
@@ -95,8 +95,6 @@
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
/*
* TWL4030
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 85b6412..44c85cd 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -97,8 +97,6 @@
/* I2C Configuration */
#define CONFIG_I2C
#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
/* Defines for SPL */
#define CONFIG_SPL_FRAMEWORK
diff --git a/include/configs/sniper.h b/include/configs/sniper.h
index 0ed72cf..1966a72 100644
--- a/include/configs/sniper.h
+++ b/include/configs/sniper.h
@@ -59,8 +59,6 @@
*/
#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED 400000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
#define CONFIG_I2C_MULTI_BUS
/*
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 7f05cb0..f266c39 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -67,8 +67,6 @@
#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 25
#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED 400000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* base address */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07
diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index 0e9fe68..eb89e56 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -63,8 +63,6 @@
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
#define CONFIG_I2C_MULTI_BUS
/*
diff --git a/include/configs/ti_armv7_omap.h b/include/configs/ti_armv7_omap.h
index da5fc81..80d4476 100644
--- a/include/configs/ti_armv7_omap.h
+++ b/include/configs/ti_armv7_omap.h
@@ -13,8 +13,6 @@
#define __CONFIG_TI_ARMV7_OMAP_H__
/* I2C IP block */
-#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
/*
* GPMC NAND block. We support 1 device and the physical address to
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index f892a57..0298b563 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -58,8 +58,6 @@
/* I2C */
#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
/* EEPROM */
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index ec7300a..ef83c00 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -3881,12 +3881,10 @@
CONFIG_SYS_OBIR
CONFIG_SYS_OHCI_BE_CONTROLLER
CONFIG_SYS_OHCI_SWAP_REG_ACCESS
-CONFIG_SYS_OMAP24_I2C_SLAVE
CONFIG_SYS_OMAP24_I2C_SLAVE1
CONFIG_SYS_OMAP24_I2C_SLAVE2
CONFIG_SYS_OMAP24_I2C_SLAVE3
CONFIG_SYS_OMAP24_I2C_SLAVE4
-CONFIG_SYS_OMAP24_I2C_SPEED
CONFIG_SYS_OMAP24_I2C_SPEED1
CONFIG_SYS_OMAP24_I2C_SPEED2
CONFIG_SYS_OMAP24_I2C_SPEED3