Coding Style cleanup: replace leading SPACEs by TABs
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Drop changes for PEP 4 following python tools]
Signed-off-by: Tom Rini <trini@ti.com>
diff --git a/drivers/mtd/nand/fsl_elbc_spl.c b/drivers/mtd/nand/fsl_elbc_spl.c
index a7476b4..2952135 100644
--- a/drivers/mtd/nand/fsl_elbc_spl.c
+++ b/drivers/mtd/nand/fsl_elbc_spl.c
@@ -59,20 +59,20 @@
if (large) {
fmr |= FMR_ECCM;
out_be32(®s->fcr, (NAND_CMD_READ0 << FCR_CMD0_SHIFT) |
- (NAND_CMD_READSTART << FCR_CMD1_SHIFT));
+ (NAND_CMD_READSTART << FCR_CMD1_SHIFT));
out_be32(®s->fir,
- (FIR_OP_CW0 << FIR_OP0_SHIFT) |
- (FIR_OP_CA << FIR_OP1_SHIFT) |
- (FIR_OP_PA << FIR_OP2_SHIFT) |
- (FIR_OP_CW1 << FIR_OP3_SHIFT) |
- (FIR_OP_RBW << FIR_OP4_SHIFT));
+ (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+ (FIR_OP_CA << FIR_OP1_SHIFT) |
+ (FIR_OP_PA << FIR_OP2_SHIFT) |
+ (FIR_OP_CW1 << FIR_OP3_SHIFT) |
+ (FIR_OP_RBW << FIR_OP4_SHIFT));
} else {
out_be32(®s->fcr, NAND_CMD_READ0 << FCR_CMD0_SHIFT);
out_be32(®s->fir,
- (FIR_OP_CW0 << FIR_OP0_SHIFT) |
- (FIR_OP_CA << FIR_OP1_SHIFT) |
- (FIR_OP_PA << FIR_OP2_SHIFT) |
- (FIR_OP_RBW << FIR_OP3_SHIFT));
+ (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+ (FIR_OP_CA << FIR_OP1_SHIFT) |
+ (FIR_OP_PA << FIR_OP2_SHIFT) |
+ (FIR_OP_RBW << FIR_OP3_SHIFT));
}
out_be32(®s->fbcr, 0);
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index a0fe1e0..3ae0044 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -112,10 +112,10 @@
fsl_upm_run_pattern(&fun->upm, fun->width, io_addr, mar);
/*
- * Some boards/chips needs this. At least the MPC8360E-RDK
- * needs it. Probably weird chip, because I don't see any
- * need for this on MPC8555E + Samsung K9F1G08U0A. Usually
- * here are 0-2 unexpected busy states per block read.
+ * Some boards/chips needs this. At least the MPC8360E-RDK
+ * needs it. Probably weird chip, because I don't see any
+ * need for this on MPC8555E + Samsung K9F1G08U0A. Usually
+ * here are 0-2 unexpected busy states per block read.
*/
if (fun->wait_flags & FSL_UPM_WAIT_RUN_PATTERN)
fun_wait(fun);
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index d4d586c..1ce55fd 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3282,7 +3282,7 @@
case NAND_ECC_NONE:
pr_warn("NAND_ECC_NONE selected by board driver. "
- "This is not recommended !!\n");
+ "This is not recommended !!\n");
chip->ecc.read_page = nand_read_page_raw;
chip->ecc.write_page = nand_write_page_raw;
chip->ecc.read_oob = nand_read_oob_std;
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index d149a6d..5246bbf 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -142,8 +142,8 @@
ops.mode = MTD_OPS_AUTO_OOB;
result = mtd_write_oob(meminfo,
- erase.addr,
- &ops);
+ erase.addr,
+ &ops);
if (result != 0) {
printf("\n%s: MTD writeoob failure: %d\n",
mtd_device, result);
diff --git a/drivers/mtd/ubi/crc32.c b/drivers/mtd/ubi/crc32.c
index ab439b3..f1bebf5 100644
--- a/drivers/mtd/ubi/crc32.c
+++ b/drivers/mtd/ubi/crc32.c
@@ -102,7 +102,7 @@
if((len >= 4)){
/* load data 32 bits wide, xor data 32 bits wide. */
size_t save_len = len & 3;
- len = len >> 2;
+ len = len >> 2;
--b; /* use pre increment below(*++b) for speed */
do {
crc ^= *++b;
@@ -200,7 +200,7 @@
if(likely(len >= 4)){
/* load data 32 bits wide, xor data 32 bits wide. */
size_t save_len = len & 3;
- len = len >> 2;
+ len = len >> 2;
--b; /* use pre increment below(*++b) for speed */
do {
crc ^= *++b;